| Common Name: | SUPERGLAZE 4043 |
| Manufacturer: | LINCOLN ELECTRIC |
| SDS Revision Date: | 11/3/2018 |
| SDS Format: | GHS-US |
| Item Number(s): | 12C087, 12C088 |
| Manufacturer Model Number(s): |
SDS Table of Contents
Click the desired link below to jump directly to that section in the SDS.
LINCOLN(R*) ELECTRIC
REVISION DATE: 11/03/2018
SAFETY DATA SHEET
| 1. PRODUCT AND COMPANY IDENTIFICATION |  |
PRODUCT NAME: SUPERGLAZE(R*) 4043
PRODUCT SIZE: ALL
OTHER MEANS OF IDENTIFICATION:
SDS NUMBER: 200000000315
RECOMMENDED USE AND RESTRICTION ON USE:
RECOMMENDED USE: GMAW (GAS METAL ARC WELDING)
RESTRICTIONS ON USE: NOT KNOWN. READ THIS SDS BEFORE USING THIS PRODUCT.
MANUFACTURER/IMPORTER/SUPPLIER/DISTRIBUTOR INFORMATION:
COMPANY NAME: THE LINCOLN ELECTRIC COMPANY
ADDRESS:
22801 SAINT CLAIR AVENUE
CLEVELAND, OHIO 44117
USA
TELEPHONE: +1 (216) 481-8100
CONTACT PERSON:
SAFETY DATA SHEET QUESTIONS: WWW.LINCOLNELECTRIC.COM/SDS
ARC WELDING SAFETY INFORMATION: WWW.LINCOLNELECTRIC.COM/SAFETY
COMPANY NAME: THE LINCOLN ELECTRIC COMPANY OF CANADA LP
ADDRESS:
179 WICKSTEED AVENUE
TORONTO, ONTARIO M4G 2B9
CANADA
TELEPHONE: +1 (416) 421-2600
CONTACT PERSON:
SAFETY DATA SHEET QUESTIONS: WWW.LINCOLNELECTRIC.COM/SDS
ARC WELDING SAFETY INFORMATION: WWW.LINCOLNELECTRIC.COM/SAFETY
EMERGENCY TELEPHONE NUMBER:
USA/CANADA/MEXICO: +1 (888) 609-1762
AMERICAS/EUROPE: +1 (216) 383-8962
ASIA PACIFIC: +1 (216) 383-8966
MIDDLE EAST/AFRICA: +1 (216) 383-8969
3E COMPANY ACCESS CODE: 333988
| 2. HAZARDS IDENTIFICATION | |
CLASSIFIED ACCORDING TO THE CRITERIA OF THE GLOBALLY HARMONIZED SYSTEM OF
CLASSIFICATION AND LABELING OF CHEMICALS (GHS), THE UNITED STATES
OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION'S HAZARD COMMUNICATION
STANDARD (29 CFR 1910.1200), CANADA'S HAZARDOUS PRODUCT REGULATIONS AND
MEXICO'S HARMONIZED SYSTEM FOR THE IDENTIFICATION AND COMMUNICATION OF
HAZARDS AND RISKS FROM HAZARDOUS CHEMICALS IN THE WORKPLACE.
HAZARD CLASSIFICATION:
NOT CLASSIFIED AS HAZARDOUS ACCORDING TO APPLICABLE GHS HAZARD
CLASSIFICATION CRITERIA.
LABEL ELEMENTS:
HAZARD SYMBOL: NO SYMBOL
SIGNAL WORD: NO SIGNAL WORD.
HAZARD STATEMENT: NOT APPLICABLE
PRECAUTIONARY STATEMENTS: NOT APPLICABLE
OTHER HAZARDS WHICH DO NOT RESULT IN GHS CLASSIFICATION:
ELECTRICAL SHOCK CAN KILL. IF WELDING MUST BE PERFORMED IN DAMP LOCATIONS
OR WITH WET CLOTHING, ON METAL STRUCTURES OR WHEN IN CRAMPED POSITIONS SUCH
AS SITTING, KNEELING OR LYING, OR IF THERE IS A HIGH RISK OF UNAVOIDABLE
OR ACCIDENTAL CONTACT WITH WORK PIECE, USE THE FOLLOWING EQUIPMENT:
SEMIAUTOMATIC DC WELDER, DC MANUAL (STICK) WELDER, OR AC WELDER WITH
REDUCED VOLTAGE CONTROL.
ARC RAYS CAN INJURE EYES AND BURN SKIN. WELDING ARC AND SPARKS CAN IGNITE
COMBUSTIBLES AND FLAMMABLE MATERIALS. OVEREXPOSURE TO WELDING FUMES AND
GASES CAN BE HAZARDOUS. READ AND UNDERSTAND THE MANUFACTURER'S
INSTRUCTIONS, SAFETY DATA SHEETS AND THE PRECAUTIONARY LABELS BEFORE USING
THIS PRODUCT. REFER TO SECTION 8.
SUBSTANCE(S) FORMED UNDER THE CONDITIONS OF USE:
THE WELDING FUME PRODUCED FROM THIS WELDING ELECTRODE MAY CONTAIN THE
FOLLOWING CONSTITUENT(S) AND/OR THEIR COMPLEX METALLIC OXIDES AS WELL AS
SOLID PARTICLES OR OTHER CONSTITUENTS FROM THE CONSUMABLES, BASE METAL, OR
BASE METAL COATING NOT LISTED BELOW.
CHEMICAL IDENTITY CAS-NO.
CARBON DIOXIDE 124-38-9
CARBON MONOXIDE 630-08-0
NITROGEN DIOXIDE 10102-44-0
OZONE 10028-15-6
| 3. COMPOSITION / INFORMATION ON INGREDIENTS | |
REPORTABLE HAZARDOUS INGREDIENTS:
MIXTURES:
CHEMICAL IDENTITY CAS NUMBER CONTENT IN PERCENT (%)*
ALUMINUM AND/OR ALUMINUM 7429-90-5 50 - <100%
ALLOYS (AS Al)
SILICON 7440-21-3 5 - <10%
IRON 7439-89-6 0.1 - <1%
COPPER AND/OR COPPER 7440-50-8 0.1 - <1%
ALLOYS AND COMPOUNDS
(AS Cu)
* ALL CONCENTRATIONS ARE PERCENT BY WEIGHT UNLESS INGREDIENT IS A GAS. GAS
CONCENTRATIONS ARE IN PERCENT BY VOLUME.
COMPOSITION COMMENTS:
THE TERM "HAZARDOUS INGREDIENTS" SHOULD BE INTERPRETED AS A TERM DEFINED IN
HAZARD COMMUNICATION STANDARDS AND DOES NOT NECESSARILY IMPLY THE EXISTENCE
OF A WELDING HAZARD. THE PRODUCT MAY CONTAIN ADDITIONAL NON-HAZARDOUS
INGREDIENTS OR MAY FORM ADDITIONAL COMPOUNDS UNDER THE CONDITION OF USE.
REFER TO SECTIONS 2 AND 8 FOR MORE INFORMATION.
| 4. FIRST AID MEASURES | |
INGESTION:
AVOID HAND, CLOTHING, FOOD, AND DRINK CONTACT WITH FLUXES, METAL FUME OR
POWDER WHICH CAN CAUSE INGESTION OF PARTICULATE DURING HAND TO MOUTH
ACTIVITIES SUCH AS DRINKING, EATING, SMOKING, ETC. IF INGESTED, DO NOT
INDUCE VOMITING. CONTACT A POISON CONTROL CENTER. UNLESS THE POISON CONTROL
CENTER ADVISES OTHERWISE, WASH OUT MOUTH THOROUGHLY WITH WATER. IF SYMPTOMS
DEVELOP, SEEK MEDICAL ATTENTION AT ONCE.
INHALATION:
MOVE TO FRESH AIR IF BREATHING IS DIFFICULT. IF BREATHING HAS STOPPED,
PERFORM ARTIFICIAL RESPIRATION AND OBTAIN MEDICAL ASSISTANCE AT ONCE.
SKIN CONTACT:
REMOVE CONTAMINATED CLOTHING AND WASH THE SKIN THOROUGHLY WITH SOAP
AND WATER. FOR REDDENED OR BLISTERED SKIN, OR THERMAL BURNS, OBTAIN
MEDICAL ASSISTANCE AT ONCE.
EYE CONTACT:
DUST OR FUME FROM THIS PRODUCT SHOULD BE FLUSHED FROM THE EYES WITH
COPIOUS AMOUNTS OF CLEAN, TEPID WATER UNTIL TRANSPORTED TO AN
EMERGENCY MEDICAL FACILITY. DO NOT ALLOW VICTIM TO RUB OR KEEP EYES
TIGHTLY CLOSED. OBTAIN MEDICAL ASSISTANCE AT ONCE.
ARC RAYS CAN INJURE EYES. IF EXPOSED TO ARC RAYS, MOVE VICTIM TO DARK
ROOM, REMOVE CONTACT LENSES AS NECESSARY FOR TREATMENT, COVER EYES WITH
A PADDED DRESSING AND REST. OBTAIN MEDICAL ASSISTANCE IF SYMPTOMS
PERSIST.
MOST IMPORTANT SYMPTOMS/EFFECTS, ACUTE AND DELAYED:
SYMPTOMS:
SHORT-TERM (ACUTE) OVEREXPOSURE TO FUMES AND GASES FROM WELDING AND
ALLIED PROCESSES MAY RESULT IN DISCOMFORT SUCH AS METAL FUME
FEVER, DIZZINESS, NAUSEA, OR DRYNESS OR IRRITATION OF NOSE, THROAT, OR
EYES. MAY AGGRAVATE PRE-EXISTING RESPIRATORY PROBLEMS (E.G. ASTHMA,
EMPHYSEMA). LONG-TERM (CHRONIC) OVEREXPOSURE TO FUMES AND GASES FROM
WELDING AND ALLIED PROCESSES CAN LEAD TO SIDEROSIS (IRON DEPOSITS IN
LUNG), CENTRAL NERVOUS SYSTEM EFFECTS, BRONCHITIS AND OTHER PULMONAR
EFFECTS. REFER TO SECTION 11 FOR MORE INFORMATION.
HAZARDS:
THE HAZARDS ASSOCIATED WITH WELDING AND ITS ALLIED PROCESSES SUCH AS
SOLDERING AND BRAZING ARE COMPLEX AND MAY INCLUDE PHYSICAL AND HEALTH
HAZARDS SUCH AS BUT NOT LIMITED TO ELECTRIC SHOCK, PHYSICAL STRAINS,
RADIATION BURNS (EYE FLASH), THERMAL BURNS DUE TO HOT METAL OR SPATTER
AND POTENTIAL HEALTH EFFECTS OF OVEREXPOSURE TO FUMES, GASES OR DUSTS
POTENTIALLY GENERATED DURING THE USE OF THIS PRODUCT. REFER TO SECTION 11
FOR MORE INFORMATION.
INDICATION OF IMMEDIATE MEDICAL ATTENTION AND SPECIAL TREATMENT NEEDED
TREATMENT: TREAT SYMPTOMATICALLY.
| 5. FIRE-FIGHTING MEASURES | |
GENERAL FIRE HAZARDS:
AS SHIPPED, THIS PRODUCT IS NONFLAMMABLE. HOWEVER, WELDING ARC AND SPARKS
AS WELL AS OPEN FLAMES AND HOT SURFACES ASSOCIATED WITH BRAZING AND
SOLDERING CAN IGNITE COMBUSTIBLE AND FLAMMABLE MATERIALS. READ AND
UNDERSTAND AMERICAN NATIONAL STANDARD Z49.1, "SAFETY IN WELDING, CUTTING
AND ALLIED PROCESSES" AND NATIONAL FIRE PROTECTION ASSOCIATION NFPA
51B, "STANDARD FOR FIRE PREVENTION DURING WELDING, CUTTING AND OTHER
HOT WORK" BEFORE USING THIS PRODUCT.
SUITABLE (AND UNSUITABLE) EXTINGUISHING MEDIA:
SUITABLE EXTINGUISHING MEDIA:
AS SHIPPED, THE PRODUCT WILL NOT BURN. IN CASE OF FIRE IN THE SURROUNDINGS:
USE APPROPRIATE EXTINGUISHING AGENT.
UNSUITABLE EXTINGUISHING MEDIA:
DO NOT USE WATER JET AS AN EXTINGUISHER, AS THIS WILL SPREAD THE FIRE.
SPECIFIC HAZARDS ARISING FROM THE CHEMICAL:
WELDING ARC AND SPARKS CAN IGNITE COMBUSTIBLES AND FLAMMABLE PRODUCTS.
SPECIAL PROTECTIVE EQUIPMENT AND PRECAUTIONS FOR FIREFIGHTERS:
SPECIAL FIRE FIGHTING PROCEDURES:
USE STANDARD FIREFIGHTING PROCEDURES AND CONSIDER THE HAZARDS OF OTHER
INVOLVED MATERIALS.
SPECIAL PROTECTIVE EQUIPMENT FOR FIRE-FIGHTERS:
SELECTION OF RESPIRATORY PROTECTION FOR FIRE FIGHTING: FOLLOW THE
GENERAL FIRE PRECAUTIONS INDICATED IN THE WORKPLACE. SELF-CONTAINED
BREATHING APPARATUS AND FULL PROTECTIVE CLOTHING MUST BE WORN IN CASE
OF FIRE.
| 6. ACCIDENTAL RELEASE MEASURES | |
PERSONAL PRECAUTIONS, PROTECTIVE EQUIPMENT AND EMERGENCY PROCEDURES:
IF AIRBORNE DUST AND/OR FUME IS PRESENT, USE ADEQUATE ENGINEERING
CONTROLS AND, IF NEEDED, PERSONAL PROTECTION TO PREVENT OVEREXPOSURE.
REFER TO RECOMMENDATIONS IN SECTION 8.
METHODS AND MATERIAL FOR CONTAINMENT AND CLEANING UP:
ABSORB WITH SAND OR OTHER INERT ABSORBENT. STOP THE FLOW OF MATERIAL, IF
THIS IS WITHOUT RISK. CLEAN UP SPILLS IMMEDIATELY, OBSERVING PRECAUTIONS
IN THE PERSONAL PROTECTIVE EQUIPMENT IN SECTION 8. AVOID GENERATING
DUST. PREVENT PRODUCT FROM ENTERING ANY DRAINS, SEWERS OR WATER
SOURCES. REFER TO SECTION 13 FOR PROPER DISPOSAL.
ENVIRONMENTAL PRECAUTIONS:
AVOID RELEASE TO THE ENVIRONMENT. PREVENT FURTHER LEAKAGE OR SPILLAGE IF
SAFE TO DO SO. DO NOT CONTAMINATE WATER SOURCES OR SEWER.
ENVIRONMENTAL MANAGER MUST BE INFORMED OF ALL MAJOR SPILLAGES.
| 7. HANDLING AND STORAGE | |
PRECAUTIONS FOR SAFE HANDLING:
PREVENT FORMATION OF DUST. PROVIDE APPROPRIATE EXHAUST VENTILATION AT
PLACES WHERE DUST IS FORMED.
READ AND UNDERSTAND THE MANUFACTURER'S INSTRUCTION AND THE PRECAUTIONARY
LABEL ON THE PRODUCT. REFER TO LINCOLN SAFETY PUBLICATIONS AT
WWW.LINCOLNELECTRIC.COM/SAFETY. SEE AMERICAN NATIONAL STANDARD Z49.1,
"SAFETY IN WELDING, CUTTING AND ALLIED PROCESSES" PUBLISHED BY THE AMERICAN
WELDING SOCIETY, HTTP://PUBS.AWS.ORG AND OSHA PUBLICATION 2206 (29 CFR
1910), U.S. GOVERNMENT PRINTING OFFICE, WWW.GPO.GOV.
CONDITIONS FOR SAFE STORAGE, INCLUDING ANY INCOMPATIBILITIES:
STORE IN CLOSED ORIGINAL CONTAINER IN A DRY PLACE. STORE IN ACCORDANCE
WITH LOCAL/REGIONAL/NATIONAL REGULATIONS. STORE AWAY FROM
INCOMPATIBLE MATERIALS.
| 8. EXPOSURE CONTROLS / PERSONAL PROTECTION | |
CONTROL PARAMETERS:
OCCUPATIONAL EXPOSURE LIMITS: US
CHEMICAL IDENTITY TYPE EXPOSURE LIMIT SOURCE
VALUES
ALUMINUM AND/OR ALUMINUM TWA 1 MG/M3 US. ACGIH THRESHOLD
ALLOYS (AS Al) - LIMIT VALUES
RESPIRABLE FRACTION. (12 2010)
ALUMINUM AND/OR ALUMINUM PEL 15 MG/M3 US. OSHA TABLE
ALLOYS (AS Al) - Z-1 LIMITS FOR
TOTAL DUST. - AS Al AIR CONTAMINANTS
(29 CFR 1910.1000)
(02 2006)
ALUMINUM AND/OR ALUMINUM REL 5 MG/M3 US. NIOSH:
ALLOYS (AS Al) - WELDING POCKET GUIDE TO
FUME OR PYROPHORIC CHEMICAL HAZARDS
POWDER. - AS Al (2005)
ALUMINUM AND/OR ALUMINUM REL 5 MG/M3 US. NIOSH:
ALLOYS (AS Al) POCKET GUIDE TO
- RESPIRABLE. CHEMICAL HAZARDS
(2005)
ALUMINUM AND/OR ALUMINUM REL 10 MG/M3 US. NIOSH:
ALLOYS (AS Al) - TOTAL POCKET GUIDE TO
CHEMICAL HAZARDS
(2005)
ALUMINUM AND/OR ALUMINUM PEL 5 MG/M3 US. OSHA TABLE
ALLOYS (AS Al) - Z-1 LIMITS FOR AIR
RESPIRABLE FRACTION. - CONTAMINANTS
AS Al (29 CFR 1910.1000)
(03 2016)
SILICON - TOTAL DUST. PEL 15 MG/M3 US. OSHA TABLE Z-1
LIMITS FOR AIR
CONTAMINANTS
(29 CFR 1910.1000)
(02 2006)
SILICON - RESPIRABLE PEL 5 MG/M3 US. OSHA TABLE Z-1
FRACTION. LIMITS FOR AIR
CONTAMINANTS
(29 CFR 1910.1000)
(02 2006)
SILICON - RESPIRABLE. REL 5 MG/M3 US. NIOSH:
POCKET GUIDE TO
CHEMICAL HAZARDS
(2005)
SILICON - TOTAL REL 10 MG/M3 US. NIOSH:
POCKET GUIDE TO
CHEMICAL HAZARDS
(2005)
COPPER AND/OR COPPER TWA 1 MG/M3 US. ACGIH THRESHOLD
ALLOYS AND COMPOUNDS LIMIT VALUES
(AS Cu) - DUST AND (03 2014)
MIST. - AS Cu
COPPER AND/OR COPPER TWA 0.2 MG/M3 US. ACGIH THRESHOLD
ALLOYS AND COMPOUNDS LIMIT VALUES
(AS Cu) - FUME. - (03 2014)
AS Cu
REL 0.1 MG/M3 US. NIOSH:
POCKET GUIDE TO
CHEMICAL HAZARDS
(2016)
COPPER AND/OR COPPER REL 1 MG/M3 US. NIOSH:
ALLOYS AND COMPOUNDS POCKET GUIDE TO
(AS Cu) - DUST AND CHEMICAL HAZARDS
MIST. - AS Cu (2016)
COPPER AND/OR COPPER PEL 0.1 MG/M3 US. OSHA TABLE
ALLOYS AND COMPOUNDS Z-1 LIMITS FOR AIR
(AS Cu) - FUME. CONTAMINANTS
- AS Cu (29 CFR 1910.1000)
(02 2006)
COPPER AND/OR COPPER PEL 1 MG/M3 US. OSHA TABLE
ALLOYS AND COMPOUNDS Z-1 LIMITS FOR
(AS Cu) - DUST AND AIR CONTAMINANTS
MIST. - AS Cu (29 CFR 1910.1000)
(02 2006)
OCCUPATIONAL EXPOSURE LIMITS: CANADA
CHEMICAL IDENTITY TYPE EXPOSURE LIMIT SOURCE
VALUES
ALUMINUM AND/OR ALUMINUM TWA 5 MG/M3 CANADA. ALBERTA OELS
ALLOYS (AS Al) (OCCUPATIONAL HEALTH
- PYROPHORIC POWDER. & SAFETY CODE,
- AS Al SCHEDULE 1, TABLE 2)
(07 2009)
ALUMINUM AND/OR ALUMINUM TWA 10 MG/M3 CANADA. ALBERTA OELS
ALLOYS (AS Al) - DUST. (OCCUPATIONAL HEALTH
& SAFETY CODE,
SCHEDULE 1, TABLE 2)
(07 2009)
ALUMINUM AND/OR ALUMINUM TWA 1 MG/M3 CANADA. BRITISH
ALLOYS (AS Al) - COLUMBIA OELS.
RESPIRABLE. (OCCUPATIONAL
EXPOSURE LIMITS FOR
CHEMICAL SUBSTANCES,
OCCUPATIONAL HEALTH
AND SAFETY
REGULATION 296/97,
AS AMENDED)
(07 2007)
ALUMINUM AND/OR ALUMINUM TWA 1 MG/M3 CANADA. MANITOBA
ALLOYS (AS Al) OELS (REG. 217/2006,
- RESPIRABLE FRACTION. THE WORKPLACE SAFETY
AND HEALTH ACT)
(03 2011)
TWA 1 MG/M3 CANADA. ONTARIO
OELS. (CONTROL OF
EXPOSURE TO
BIOLOGICAL OR
CHEMICAL AGENTS)
(11 2010)
ALUMINUM AND/OR ALUMINUM 8 HR ACL 5 MG/M3 CANADA. SASKATCHEWAN
ALLOYS (AS Al) - OELS (OCCUPATIONAL
PYROPHORIC POWDER. HEALTH AND SAFETY
- AS Al REGULATIONS, 1996,
TABLE 21) (05 2009)
ALUMINUM AND/OR ALUMINUM 8 HR ACL 10 MG/M3 CANADA. SASKATCHEWAN
ALLOYS (AS Al) OELS (OCCUPATIONAL
- DUST. - AS Al HEALTH AND SAFETY
REGULATIONS, 1996,
TABLE 21) (05 2009)
ALUMINUM AND/OR ALUMINUM 15 MIN ACL 10 MG/M3 CANADA. SASKATCHEWAN
ALLOYS (AS Al) OELS (OCCUPATIONAL
- PYROPHORIC POWDER. HEALTH AND SAFETY
- AS Al REGULATIONS, 1996,
TABLE 21) (05 2009)
ALUMINUM AND/OR ALUMINUM 15 MIN ACL 20 MG/M3 CANADA. SASKATCHEWAN
ALLOYS (AS Al) OELS (OCCUPATIONAL
- DUST. - AS Al HEALTH AND SAFETY
REGULATIONS, 1996,
TABLE 21) (05 2009)
ALUMINUM AND/OR ALUMINUM TWA 10 MG/M3 CANADA. QUEBEC OELS.
ALLOYS (AS Al) (MINISTRY OF LABOR -
REGULATION
RESPECTING THE
QUALITY OF THE WORK
ENVIRONMENT)
(09 2017)
ALUMINUM AND/OR ALUMINUM TWA 5 MG/M3 CANADA. QUEBEC OELS.
ALLOYS (AS Al) - AS Al (MINISTRY OF LABOR -
REGULATION
RESPECTING THE
QUALITY OF THE WORK
ENVIRONMENT)
(09 2017)
ALUMINUM AND/OR ALUMINUM TWA 5 MG/M3 CANADA. QUEBEC OELS.
ALLOYS (AS Al) - WELDING (MINISTRY OF LABOR -
FUME. - AS Al REGULATION
RESPECTING THE
QUALITY OF THE WORK
ENVIRONMENT)
(09 2017)
SILICON - TOTAL DUST. TWA 10 MG/M3 CANADA. ONTARIO
OELS. (CONTROL OF
EXPOSURE TO
BIOLOGICAL OR
CHEMICAL
AGENTS) (07 2010)
SILICON 8 HR ACL 10 MG/M3 CANADA. SASKATCHEWAN
OELS (OCCUPATIONAL
HEALTH AND SAFETY
REGULATIONS, 1996,
TABLE 21) (05 2009)
15 MIN ACL 20 MG/M3 CANADA. SASKATCHEWAN
OELS (OCCUPATIONAL
HEALTH AND SAFETY
REGULATIONS, 1996,
TABLE 21) (05 2009)
SILICON - TOTAL DUST. TWA 10 MG/M3 CANADA. QUEBEC OELS.
(MINISTRY OF LABOR -
REGULATION
RESPECTING THE
QUALITY OF THE WORK
ENVIRONMENT)
(09 2017)
COPPER AND/OR COPPER TWA 0.2 MG/M3 CANADA. ALBERTA OELS
ALLOYS AND COMPOUNDS (OCCUPATIONAL HEALTH
(AS Cu) - FUME. & SAFETY CODE,
SCHEDULE 1, TABLE 2)
(07 2009)
COPPER AND/OR COPPER TWA 1 MG/M3 CANADA. ALBERTA OELS
ALLOYS AND COMPOUNDS (OCCUPATIONAL HEALTH
(AS Cu) - DUST AND & SAFETY CODE,
MIST. - AS Cu SCHEDULE 1, TABLE 2)
(07 2009)
COPPER AND/OR COPPER TWA 0.2 MG/M3 CANADA. BRITISH
ALLOYS AND COMPOUNDS COLUMBIA OELS.
(AS Cu) - FUME. - AS Cu (OCCUPATIONAL
EXPOSURE LIMITS FOR
CHEMICAL SUBSTANCES,
OCCUPATIONAL HEALTH
AND SAFETY
REGULATION 296/97,
AS AMENDED)
(07 2007)
COPPER AND/OR COPPER TWA 1 MG/M3 CANADA. BRITISH
ALLOYS AND COMPOUNDS COLUMBIA OELS.
(AS Cu) - DUST AND (OCCUPATIONAL
MIST. - AS Cu EXPOSURE LIMITS FOR
CHEMICAL SUBSTANCES,
OCCUPATIONAL HEALTH
AND SAFETY
REGULATION 296/97,
AS AMENDED)
(07 2007)
TWA 1 MG/M3 CANADA. MANITOBA
OELS (REG. 217/2006,
THE WORKPLACE SAFETY
AND HEALTH ACT)
(03 2014)
COPPER AND/OR COPPER TWA 0.2 MG/M3 CANADA. MANITOBA
ALLOYS AND COMPOUNDS OELS (REG. 217/2006,
(AS Cu) - FUME. - AS Cu THE WORKPLACE SAFETY
AND HEALTH ACT)
(03 2014)
COPPER AND/OR COPPER TWA 1 MG/M3 CANADA. ONTARIO
ALLOYS AND COMPOUNDS OELS. (CONTROL OF
(AS Cu) - DUST AND EXPOSURE TO
FUME. - AS Cu BIOLOGICAL OR
CHEMICAL AGENTS)
(06 2015)
COPPER AND/OR COPPER 8 HR ACL 1 MG/M3 CANADA. SASKATCHEWAN
ALLOYS AND COMPOUNDS OELS (OCCUPATIONAL
(AS Cu) - DUST AND HEALTH AND SAFETY
MIST. - AS Cu REGULATIONS, 1996,
TABLE 21) (05 2009)
COPPER AND/OR COPPER 15 MIN ACL 0.6 MG/M3 CANADA. SASKATCHEWAN
ALLOYS AND COMPOUNDS OELS (OCCUPATIONAL
(AS Cu) - FUME. - AS Cu HEALTH AND SAFETY
REGULATIONS, 1996,
TABLE 21) (05 2009)
COPPER AND/OR COPPER 15 MIN ACL 3 MG/M3 CANADA. SASKATCHEWAN
ALLOYS AND COMPOUNDS OELS (OCCUPATIONAL
(AS Cu) - DUST AND HEALTH AND SAFETY
MIST. - AS Cu REGULATIONS, 1996,
TABLE 21) (05 2009)
COPPER AND/OR COPPER 8 HR ACL 0.2 MG/M3 CANADA. SASKATCHEWAN
ALLOYS AND COMPOUNDS OELS (OCCUPATIONAL
(AS Cu) - FUME. - AS Cu HEALTH AND SAFETY
REGULATIONS, 1996,
TABLE 21) (05 2009)
COPPER AND/OR COPPER TWA 1 MG/M3 CANADA. QUEBEC OELS.
ALLOYS AND COMPOUNDS (MINISTRY OF LABOR -
(AS Cu) - DUST AND REGULATION
MIST. - AS Cu RESPECTING THE
QUALITY OF THE WORK
ENVIRONMENT)
(09 2017)
COPPER AND/OR COPPER TWA 0.2 MG/M3 CANADA. QUEBEC OELS.
ALLOYS AND COMPOUNDS (MINISTRY OF LABOR -
(AS Cu) - FUME. - AS Cu REGULATION
RESPECTING THE
QUALITY OF THE WORK
ENVIRONMENT)
(09 2017)
TWA 0.2 MG/M3 CANADA. ONTARIO
OELS. (CONTROL OF
EXPOSURE TO
BIOLOGICAL OR
CHEMICAL AGENTS)
(08 2017)
OCCUPATIONAL EXPOSURE LIMITS: MEXICO
CHEMICAL IDENTITY TYPE EXPOSURE LIMIT SOURCE
VALUES
ALUMINUM AND/OR ALUMINUM VLE-PPT 1 MG/M3 MEXICO. OELS.
ALLOYS (AS Al) - (NOM-010-STPS-2014
RESPIRABLE FRACTION. CHEMICAL POLLUTANTS
AT THE WORKPLACE;
ASSESSMENT AND
CONTROL) (04 2014)
IRON - AS Fe VLE-PPT 1 MG/M3 MEXICO. OELS.
(NOM-010-STPS-2014
CHEMICAL POLLUTANTS
AT THE WORKPLACE;
ASSESSMENT AND
CONTROL) (04 2014)
COPPER AND/OR COPPER VLE-PPT 0.2 MG/M3 MEXICO. OELS.
ALLOYS AND COMPOUNDS (NOM-010-STPS-2014
(AS Cu) - FUME. - AS Cu CHEMICAL POLLUTANTS
AT THE WORKPLACE;
ASSESSMENT AND
CONTROL) (04 2014)
COPPER AND/OR COPPER VLE-PPT 1 MG/M3 MEXICO. OELS.
ALLOYS AND COMPOUNDS (NOM-010-STPS-2014
(AS Cu) - DUST AND CHEMICAL POLLUTANTS
MIST. - AS Cu AT THE WORKPLACE;
ASSESSMENT AND
CONTROL) (04 2014)
ADDITIONAL EXPOSURE LIMITS UNDER THE CONDITIONS OF USE: US
CHEMICAL IDENTITY TYPE EXPOSURE LIMIT SOURCE
VALUES
CARBON DIOXIDE TWA 5,000 PPM US. ACGIH THRESHOLD
LIMIT VALUES
(12 2010)
STEL 30,000 PPM US. ACGIH THRESHOLD
LIMIT VALUES
(12 2010)
PEL 5,000 PPM US. OSHA TABLE Z-1
9,000 MG/M3 LIMITS FOR AIR
CONTAMINANTS
(29 CFR 1910.1000)
(02 2006)
STEL 30,000 PPM US. NIOSH:
54,000 MG/M3 POCKET GUIDE TO
CHEMICAL HAZARDS
(2005)
REL 5,000 PPM US. NIOSH:
9,000 MG/M3 POCKET GUIDE TO
CHEMICAL HAZARDS
(2005)
CARBON MONOXIDE TWA 25 PPM US. ACGIH THRESHOLD
LIMIT VALUES
(12 2010)
PEL 50 PPM US. OSHA TABLE
55 MG/M3 Z-1 LIMITS FOR AIR
CONTAMINANTS
(29 CFR 1910.1000)
(02 2006)
REL 35 PPM US. NIOSH:
40 MG/M3 POCKET GUIDE TO
CHEMICAL HAZARDS
(2005)
CEIL_TIME 200 PPM US. NIOSH:
229 MG/M3 POCKET GUIDE TO
CHEMICAL HAZARDS
(2005)
NITROGEN DIOXIDE TWA 0.2 PPM US. ACGIH THRESHOLD
LIMIT VALUES
(02 2012)
CEILING 5 PPM US. OSHA TABLE Z-1
9 MG/M3 LIMITS FOR AIR
CONTAMINANTS
(29 CFR 1910.1000)
(02 2006)
STEL 1 PPM US. NIOSH:
1.8 MG/M3 POCKET GUIDE TO
CHEMICAL HAZARDS
(2005)
OZONE PEL 0.1 PPM US. OSHA TABLE
0.2 MG/M3 Z-1 LIMITS FOR AIR
CONTAMINANTS
(29 CFR 1910.1000)
(02 2006)
CEIL_TIME 0.1 PPM US. NIOSH:
0.2 MG/M3 POCKET GUIDE TO
CHEMICAL HAZARDS
(2005)
TWA 0.05 PPM US. ACGIH THRESHOLD
LIMIT VALUES
(03 2014)
TWA 0.20 PPM US. ACGIH THRESHOLD
LIMIT VALUES
(03 2014)
TWA 0.10 PPM US. ACGIH THRESHOLD
LIMIT VALUES
(03 2014)
TWA 0.08 PPM US. ACGIH THRESHOLD
LIMIT VALUES
(03 2014)
ADDITIONAL EXPOSURE LIMITS UNDER THE CONDITIONS OF USE: CANADA
CHEMICAL IDENTITY TYPE EXPOSURE LIMIT SOURCE
VALUES
CARBON DIOXIDE STEL 30,000 PPM CANADA. ALBERTA OELS
54,000 MG/M3 (OCCUPATIONAL HEALTH
& SAFETY CODE,
SCHEDULE 1, TABLE 2)
(07 2009)
TWA 5,000 PPM CANADA. ALBERTA OELS
9,000 MG/M3 (OCCUPATIONAL HEALTH
& SAFETY CODE,
SCHEDULE 1, TABLE 2)
(07 2009)
TWA 5,000 PPM CANADA. BRITISH
COLUMBIA OELS.
(OCCUPATIONAL
EXPOSURE LIMITS FOR
CHEMICAL SUBSTANCES,
OCCUPATIONAL HEALTH
AND SAFETY
REGULATION 296/97,
AS AMENDED)
(07 2007)
STEL 15,000 PPM CANADA. BRITISH
COLUMBIA OELS.
(OCCUPATIONAL
EXPOSURE LIMITS
FOR CHEMICAL
SUBSTANCES,
OCCUPATIONAL HEALTH
AND SAFETY
REGULATION 296/97,
AS AMENDED)
(07 2007)
TWA 5,000 PPM CANADA. MANITOBA
OELS (REG. 217/2006,
THE WORKPLACE SAFETY
AND HEALTH ACT)
(03 2011)
STEL 30,000 PPM CANADA. MANITOBA
OELS (REG. 217/2006,
THE WORKPLACE SAFETY
AND HEALTH ACT)
(03 2011)
STEL 30,000 PPM CANADA. ONTARIO
OELS. (CONTROL OF
EXPOSURE TO
BIOLOGICAL OR
CHEMICAL AGENTS)
(11 2010)
TWA 5,000 PPM CANADA. ONTARIO
OELS. (CONTROL
OF EXPOSURE
TO BIOLOGICAL
OR CHEMICAL
AGENTS) (11 2010)
8 HR ACL 5,000 PPM CANADA. SASKATCHEWAN
OELS (OCCUPATIONAL
HEALTH AND
SAFETY REGULATIONS,
1996, TABLE 21)
(05 2009)
15 MIN ACL 30,000 PPM CANADA. SASKATCHEWAN
OELS (OCCUPATIONAL
HEALTH AND SAFETY
REGULATIONS, 1996,
TABLE 21)
(05 2009)
TWA 5,000 PPM CANADA. QUEBEC OELS.
9,000 MG/M3 (MINISTRY OF LABOR -
REGULATION
RESPECTING THE
QUALITY OF THE
WORK ENVIRONMENT)
(09 2017)
STEL 30,000 PPM CANADA. QUEBEC OELS.
54,000 MG/M3 (MINISTRY OF LABOR -
REGULATION
RESPECTING THE
QUALITY OF THE
WORK ENVIRONMENT)
(09 2017)
CARBON MONOXIDE TWA 25 PPM CANADA. ALBERTA OELS
29 MG/M3 (OCCUPATIONAL HEALTH
& SAFETY CODE,
SCHEDULE 1, TABLE 2)
(07 2009)
TWA 25 PPM CANADA. BRITISH
COLUMBIA OELS.
(OCCUPATIONAL
EXPOSURE LIMITS FOR
CHEMICAL SUBSTANCES,
OCCUPATIONAL HEALTH
AND SAFETY
REGULATION 296/97,
AS AMENDED)
(07 2007)
STEL 100 PPM CANADA. BRITISH
COLUMBIA OELS.
(OCCUPATIONAL
EXPOSURE LIMITS
FOR CHEMICAL
SUBSTANCES,
OCCUPATIONAL HEALTH
AND SAFETY
REGULATION 296/97,
AS AMENDED)
(07 2007)
TWA 25 PPM CANADA. MANITOBA
OELS (REG. 217/2006,
THE WORKPLACE SAFETY
AND HEALTH ACT)
(03 2011)
TWA 25 PPM CANADA. ONTARIO
OELS. (CONTROL OF
EXPOSURE TO
BIOLOGICAL OR
CHEMICAL AGENTS)
(07 2010)
8 HR ACL 25 PPM CANADA. SASKATCHEWAN
OELS (OCCUPATIONAL
HEALTH AND SAFETY
REGULATIONS, 1996,
TABLE 21) (05 2009)
15 MIN ACL 190 PPM CANADA. SASKATCHEWAN
OELS (OCCUPATIONAL
HEALTH AND SAFETY
REGULATIONS, 1996,
TABLE 21) (05 2009)
TWA 35 PPM CANADA. QUEBEC OELS.
40 MG/M3 (MINISTRY OF LABOR -
REGULATION
RESPECTING THE
QUALITY OF THE WORK
ENVIRONMENT)
(09 2017)
STEL 200 PPM CANADA. QUEBEC OELS.
230 MG/M3 (MINISTRY OF LABOR -
REGULATION
RESPECTING THE
QUALITY OF THE WORK
ENVIRONMENT)
(09 2017)
NITROGEN DIOXIDE STEL 5 PPM CANADA. ALBERTA OELS
9.4 MG/M3 (OCCUPATIONAL HEALTH
& SAFETY CODE,
SCHEDULE 1, TABLE 2)
(07 2009)
TWA 3 PPM CANADA. ALBERTA OELS
5.6 MG/M3 (OCCUPATIONAL HEALTH
& SAFETY CODE,
SCHEDULE 1, TABLE 2)
(07 2009)
CEILING 1 PPM CANADA. BRITISH
COLUMBIA OELS.
(OCCUPATIONAL
EXPOSURE LIMITS
FOR CHEMICAL
SUBSTANCES,
OCCUPATIONAL HEALTH
AND SAFETY
REGULATION 296/97,
AS AMENDED)
(07 2007)
TWA 0.2 PPM CANADA. MANITOBA
OELS (REG.
217/2006, THE
WORKPLACE SAFETY
AND HEALTH ACT)
(03 2012)
STEL 5 PPM CANADA. ONTARIO
OELS. (CONTROL OF
EXPOSURE TO
BIOLOGICAL OR
CHEMICAL AGENTS)
(11 2010)
TWA 3 PPM CANADA. ONTARIO
OELS. (CONTROL OF
EXPOSURE TO
BIOLOGICAL OR
CHEMICAL
AGENTS) (11 2010)
8 HR ACL 3 PPM CANADA. SASKATCHEWAN
OELS (OCCUPATIONAL
HEALTH AND SAFETY
REGULATIONS, 1996,
TABLE 21) (05 2009)
15 MIN ACL 5 PPM CANADA. SASKATCHEWAN
OELS (OCCUPATIONAL
HEALTH AND SAFETY
REGULATIONS, 1996,
TABLE 21) (05 2009)
TWA 3 PPM CANADA. QUEBEC OELS.
5.6 MG/M3 (MINISTRY OF LABOR -
REGULATION
RESPECTING THE
QUALITY OF THE WORK
ENVIRONMENT)
(09 2017)
OZONE STEL 0.3 PPM CANADA. ALBERTA OELS
0.6 MG/M3 (OCCUPATIONAL HEALTH
& SAFETY CODE,
SCHEDULE 1, TABLE 2)
(07 2009)
TWA 0.1 PPM CANADA. ALBERTA OELS
0.2 MG/M3 (OCCUPATIONAL HEALTH
& SAFETY CODE,
SCHEDULE 1, TABLE 2)
(07 2009)
TWA 0.05 PPM CANADA. BRITISH
COLUMBIA OELS.
(OCCUPATIONAL
EXPOSURE LIMITS FOR
CHEMICAL SUBSTANCES,
OCCUPATIONAL HEALTH
AND SAFETY
REGULATION 296/97,
AS AMENDED)
(07 2007)
TWA 0.1 PPM CANADA. BRITISH
COLUMBIA OELS.
(OCCUPATIONAL
EXPOSURE LIMITS FOR
CHEMICAL SUBSTANCES,
OCCUPATIONAL HEALTH
AND SAFETY
REGULATION 296/97,
AS AMENDED)
(07 2007)
TWA 0.08 PPM CANADA. BRITISH
COLUMBIA OELS.
(OCCUPATIONAL
EXPOSURE LIMITS FOR
CHEMICAL SUBSTANCES,
OCCUPATIONAL HEALTH
AND SAFETY
REGULATION 296/97,
AS AMENDED)
(07 2007)
TWA 0.2 PPM CANADA. BRITISH
COLUMBIA OELS.
(OCCUPATIONAL
EXPOSURE LIMITS
FOR CHEMICAL
SUBSTANCES,
OCCUPATIONAL HEALTH
AND SAFETY
REGULATION 296/97,
AS AMENDED)
(07 2007)
TWA 0.1 PPM CANADA. ONTARIO
0.2 MG/M3 OELS. (CONTROL OF
EXPOSURE TO
BIOLOGICAL OR
CHEMICAL AGENTS)
(07 2010)
STEL 0.3 PPM CANADA. ONTARIO
0.6 MG/M3 OELS. (CONTROL OF
EXPOSURE TO
BIOLOGICAL OR
CHEMICAL AGENTS)
(07 2010)
15 MIN ACL 0.15 PPM CANADA. SASKATCHEWAN
OELS (OCCUPATIONAL
HEALTH AND SAFETY
REGULATIONS, 1996,
TABLE 21) (05 2009)
8 HR ACL 0.05 PPM CANADA. SASKATCHEWAN
OELS (OCCUPATIONAL
HEALTH AND SAFETY
REGULATIONS, 1996,
TABLE 21) (05 2009)
CEILING 0.1 PPM CANADA. QUEBEC
0.2 MG/M3 OELS. (MINISTRY OF
LABOR - REGULATION
RESPECTING THE
QUALITY OF THE WORK
ENVIRONMENT)
(12 2008)
TWA 0.20 PPM CANADA. MANITOBA
OELS (REG. 217/2006,
THE WORKPLACE SAFETY
AND HEALTH ACT)
(03 2014)
TWA 0.05 PPM CANADA. MANITOBA
OELS (REG. 217/2006,
THE WORKPLACE SAFETY
AND HEALTH ACT)
(03 2014)
TWA 0.08 PPM CANADA. MANITOBA
OELS (REG. 217/2006,
THE WORKPLACE SAFETY
AND HEALTH ACT)
(03 2014)
TWA 0.10 PPM CANADA. MANITOBA
OELS (REG. 217/2006,
THE WORKPLACE SAFETY
AND HEALTH ACT)
(03 2014)
ADDITIONAL EXPOSURE LIMITS UNDER THE CONDITIONS OF USE: MEXICO
CHEMICAL IDENTITY TYPE EXPOSURE LIMIT SOURCE
VALUES
CARBON DIOXIDE VLE-CT 30,000 PPM MEXICO. OELS.
(NOM-010-STPS-2014
CHEMICAL POLLUTANTS
AT THE WORKPLACE;
ASSESSMENT AND
CONTROL) (04 2014)
VLE-PPT 5,000 PPM MEXICO. OELS.
(NOM-010-STPS-2014
CHEMICAL POLLUTANTS
AT THE WORKPLACE;
ASSESSMENT AND
CONTROL) (04 2014)
CARBON MONOXIDE VLE-PPT 25 PPM MEXICO. OELS.
(NOM-010-STPS-2014
CHEMICAL POLLUTANTS
AT THE WORKPLACE;
ASSESSMENT AND
CONTROL) (04 2014)
NITROGEN DIOXIDE VLE-PPT 0.2 PPM MEXICO. OELS.
(NOM-010-STPS-2014
CHEMICAL POLLUTANTS
AT THE WORKPLACE;
ASSESSMENT AND
CONTROL) (04 2014)
OZONE VLE-P 0.1 PPM MEXICO. OELS.
(NOM-010-STPS-2014
CHEMICAL POLLUTANTS
AT THE WORKPLACE;
ASSESSMENT AND
CONTROL) (04 2014)
APPROPRIATE ENGINEERING CONTROLS:
VENTILATION:
USE ENOUGH VENTILATION AND LOCAL EXHAUST AT THE ARC, FLAME OR HEAT SOURCE
TO KEEP THE FUMES AND GASES FROM THE WORKER'S BREATHING ZONE AND THE
GENERAL AREA. TRAIN THE OPERATOR TO KEEP THEIR HEAD OUT OF THE FUMES.
KEEP EXPOSURE AS LOW AS POSSIBLE.
INDIVIDUAL PROTECTION MEASURES, SUCH AS PERSONAL PROTECTIVE EQUIPMENT:
GENERAL INFORMATION:
EXPOSURE GUIDELINES:
TO REDUCE THE POTENTIAL FOR OVEREXPOSURE, USE CONTROLS SUCH AS ADEQUATE
VENTILATION AND PERSONAL PROTECTIVE EQUIPMENT (PPE). OVEREXPOSURE REFERS
TO EXCEEDING APPLICABLE LOCAL LIMITS, THE AMERICAN CONFERENCE OF
GOVERNMENTAL INDUSTRIAL HYGIENISTS (ACGIH) THRESHOLD LIMIT VALUES (TLVS)
OR THE OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION'S (OSHA)
PERMISSIBLE EXPOSURE LIMITS (PELS). WORKPLACE EXPOSURE LEVELS SHOULD
BE ESTABLISHED BY COMPETENT INDUSTRIAL HYGIENE ASSESSMENTS. UNLESS
EXPOSURE LEVELS ARE CONFIRMED TO BE BELOW THE APPLICABLE LOCAL LIMIT, TLV
OR PEL, WHICHEVER IS LOWER, RESPIRATOR USE IS REQUIRED. ABSENT
THESE CONTROLS, OVEREXPOSURE TO ONE OR MORE COMPOUND CONSTITUENTS,
INCLUDING THOSE IN THE FUME OR AIRBORNE PARTICLES, MAY OCCUR RESULTING
IN POTENTIAL HEALTH HAZARDS. ACCORDING TO THE ACGIH, TLVS AND
BIOLOGICAL EXPOSURE INDICES (BEIS) "REPRESENT CONDITIONS UNDER WHICH
ACGIH BELIEVES THAT NEARLY ALL WORKERS MAY BE REPEATEDLY EXPOSED
WITHOUT ADVERSE HEALTH EFFECTS." THE ACGIH FURTHER STATES THAT THE
TLV-TWA SHOULD BE USED AS A GUIDE IN THE CONTROL OF HEALTH HAZARDS AND
SHOULD NOT BE USED TO INDICATE A FINE LINE BETWEEN SAFE AND
DANGEROUS EXPOSURES. SEE SECTION 10 FOR INFORMATION ON CONSTITUENTS
WHICH HAVE SOME POTENTIAL TO PRESENT HEALTH HAZARDS. WELDING CONSUMABLES
AND MATERIALS BEING JOINED MAY CONTAIN CHROMIUM AS AN UNINTENDED
TRACE ELEMENT. MATERIALS THAT CONTAIN CHROMIUM MAY PRODUCE SOME AMOUNT
OF HEXAVALENT CHROMIUM (CRVI) AND OTHER CHROMIUM COMPOUNDS AS A BYPRODUCT
IN THE FUME. IN 2018, THE AMERICAN CONFERENCE OF GOVERNMENTAL
INDUSTRIAL HYGIENISTS (ACGIH) LOWERED THE THRESHOLD LIMIT VALUE (TLV)
FOR HEXAVALENT CHROMIUM FROM 50 MICROGRAMS PER CUBIC METER OF AIR
(50 (MICRO)G/M3) TO 0.2 (MICRO)G/M3. AT THESE NEW LIMITS, CRVI EXPOSURES
AT OR ABOVE THE TLV MAY BE POSSIBLE IN CASES WHERE ADEQUATE VENTILATION
IS NOT PROVIDED. CRVI COMPOUNDS ARE ON THE IARC AND NTP LISTS AS POSING
A LUNG CANCER AND SINUS CANCER RISK. WORKPLACE CONDITIONS ARE UNIQUE
AND WELDING FUME EXPOSURES LEVELS VARY. WORKPLACE EXPOSURE ASSESSMENTS
MUST BE CONDUCTED BY A QUALIFIED PROFESSIONAL, SUCH AS AN
INDUSTRIAL HYGIENIST, TO DETERMINE IF EXPOSURES ARE BELOW APPLICABLE
LIMITS AND TO MAKE RECOMMENDATIONS WHEN NECESSARY FOR
PREVENTING OVEREXPOSURES.
EYE/FACE PROTECTION:
WEAR HELMET OR USE FACE SHIELD WITH FILTER LENS SHADE NUMBER 12 OR DARKER
FOR OPEN ARC PROCESSES - OR FOLLOW THE RECOMMENDATIONS AS SPECIFIED IN
ANSI Z49.1, SECTION 4, BASED ON YOUR PROCESS AND SETTINGS. NO SPECIFIC
LENS SHADE RECOMMENDATION FOR SUBMERGED ARC OR ELECTROSLAG PROCESSES.
SHIELD OTHERS BY PROVIDING APPROPRIATE SCREENS AND FLASH
GOGGLES.
SKIN PROTECTION:
HAND PROTECTION:
WEAR PROTECTIVE GLOVES. SUITABLE GLOVES CAN BE RECOMMENDED BY THE GLOVE
SUPPLIER.
OTHER:
PROTECTIVE CLOTHING:
WEAR HAND, HEAD, AND BODY PROTECTION WHICH HELP TO PREVENT INJURY
FROM RADIATION, OPEN FLAMES, HOT SURFACES, SPARKS AND ELECTRICAL SHOCK.
SEE Z49.1. AT A MINIMUM, THIS INCLUDES WELDER'S GLOVES AND A PROTECTIVE
FACE SHIELD WHEN WELDING, AND MAY INCLUDE ARM PROTECTORS, APRONS,
HATS, SHOULDER PROTECTION, AS WELL AS DARK SUBSTANTIAL CLOTHING WHEN
WELDING, BRAZING AND SOLDERING. WEAR DRY GLOVES FREE OF HOLES OR SPLIT
SEAMS. TRAIN THE OPERATOR NOT TO PERMIT ELECTRICALLY LIVE PARTS OR
ELECTRODES FROM CONTACTING THE SKIN . . . OR CLOTHING OR GLOVES IF THEY
ARE WET. INSULATE YOURSELF FROM THE WORK PIECE AND GROUND USING DRY
PLYWOOD, RUBBER MATS OR OTHER DRY INSULATION.
RESPIRATORY PROTECTION:
KEEP YOUR HEAD OUT OF FUMES. USE ENOUGH VENTILATION AND LOCAL EXHAUST TO
KEEP FUMES AND GASES FROM YOUR BREATHING ZONE AND THE GENERAL AREA.
AN APPROVED RESPIRATOR SHOULD BE USED UNLESS EXPOSURE ASSESSMENTS ARE
BELOW APPLICABLE EXPOSURE LIMITS.
HYGIENE MEASURES:
DO NOT EAT, DRINK OR SMOKE WHEN USING THE PRODUCT. ALWAYS OBSERVE
GOOD PERSONAL HYGIENE MEASURES, SUCH AS WASHING AFTER HANDLING THE
MATERIAL AND BEFORE EATING, DRINKING, AND/OR SMOKING. ROUTINELY WASH
WORK CLOTHING AND PROTECTIVE EQUIPMENT TO REMOVE CONTAMINANTS. DETERMINE
THE COMPOSITION AND QUANTITY OF FUMES AND GASES TO WHICH WORKERS ARE
EXPOSED BY TAKING AN AIR SAMPLE FROM INSIDE THE WELDER'S HELMET IF WORN OR
IN THE WORKER'S BREATHING ZONE. IMPROVE VENTILATION IF EXPOSURES ARE
NOT BELOW LIMITS. SEE ANSI/AWS F1.1, F1.2, F1.3 AND F1.5, AVAILABLE FROM
THE AMERICAN WELDING SOCIETY, WWW.AWS.ORG.
| 9. PHYSICAL AND CHEMICAL PROPERTIES | |
APPEARANCE: SOLID WELDING WIRE OR ROD.
PHYSICAL STATE: SOLID
FORM: SOLID
COLOR: NO DATA AVAILABLE.
ODOR: NO DATA AVAILABLE.
ODOR THRESHOLD: NO DATA AVAILABLE.
PH: NO DATA AVAILABLE.
MELTING POINT/FREEZING POINT: NO DATA AVAILABLE.
INITIAL BOILING POINT AND BOILING RANGE: NO DATA AVAILABLE.
FLASH POINT: NO DATA AVAILABLE.
EVAPORATION RATE: NO DATA AVAILABLE.
FLAMMABILITY (SOLID, GAS): NO DATA AVAILABLE.
UPPER/LOWER LIMIT ON FLAMMABILITY OR EXPLOSIVE LIMITS:
FLAMMABILITY LIMIT - UPPER (%): NO DATA AVAILABLE.
FLAMMABILITY LIMIT - LOWER (%): NO DATA AVAILABLE.
EXPLOSIVE LIMIT - UPPER (%): NO DATA AVAILABLE.
EXPLOSIVE LIMIT - LOWER (%): NO DATA AVAILABLE.
VAPOR PRESSURE: NO DATA AVAILABLE.
VAPOR DENSITY: NO DATA AVAILABLE.
DENSITY: NO DATA AVAILABLE.
RELATIVE DENSITY: NO DATA AVAILABLE.
SOLUBILITY(IES):
SOLUBILITY IN WATER: NO DATA AVAILABLE.
SOLUBILITY (OTHER): NO DATA AVAILABLE.
PARTITION COEFFICIENT (N-OCTANOL/WATER): NO DATA AVAILABLE.
AUTO-IGNITION TEMPERATURE: NO DATA AVAILABLE.
DECOMPOSITION TEMPERATURE: NO DATA AVAILABLE.
VISCOSITY: NO DATA AVAILABLE.
| 10. STABILITY AND REACTIVITY | |
REACTIVITY:
THE PRODUCT IS NON-REACTIVE UNDER NORMAL CONDITIONS OF USE, STORAGE AND
TRANSPORT.
CHEMICAL STABILITY: MATERIAL IS STABLE UNDER NORMAL CONDITIONS.
POSSIBILITY OF HAZARDOUS REACTIONS: NONE UNDER NORMAL CONDITIONS.
CONDITIONS TO AVOID: AVOID HEAT OR CONTAMINATION.
INCOMPATIBLE MATERIALS:
STRONG ACIDS. STRONG OXIDIZING SUBSTANCES. STRONG BASES.
HAZARDOUS DECOMPOSITION PRODUCTS:
FUMES AND GASES FROM WELDING AND ITS ALLIED PROCESSES SUCH AS BRAZING
AND SOLDERING CANNOT BE CLASSIFIED SIMPLY. THE COMPOSITION AND QUANTITY
OF BOTH ARE DEPENDENT UPON THE METAL TO WHICH THE JOINING OR HOT WORK
IS APPLIED, THE PROCESS, PROCEDURE - AND WHERE APPLICABLE - THE ELECTRODE
OR CONSUMABLE USED. OTHER CONDITIONS WHICH ALSO INFLUENCE THE COMPOSITION
AND QUANTITY OF THE FUMES AND GASES TO WHICH WORKERS MAY BE EXPOSED
INCLUDE: COATINGS ON THE METAL BEING WELDED OR WORKED (SUCH AS
PAINT, PLATING, OR GALVANIZING), THE NUMBER OF OPERATORS AND THE VOLUME
OF THE WORK AREA, THE QUALITY AND AMOUNT OF VENTILATION, THE POSITION OF
THE OPERATOR'S HEAD WITH RESPECT TO THE FUME PLUME, AS WELL AS THE
PRESENCE OF CONTAMINANTS IN THE ATMOSPHERE (SUCH AS CHLORINATED
HYDROCARBON VAPORS FROM CLEANING AND DEGREASING
ACTIVITIES.)
IN CASES WHERE AN ELECTRODE OR OTHER APPLIED MATERIAL IS CONSUMED, THE
FUME AND GAS DECOMPOSITION PRODUCTS GENERATED ARE DIFFERENT IN PERCENT
AND FORM FROM THE INGREDIENTS LISTED IN SECTION 3. DECOMPOSITION PRODUCTS
OF NORMAL OPERATION INCLUDE THOSE ORIGINATING FROM THE
VOLATILIZATION, REACTION, OR OXIDATION OF THE MATERIALS SHOWN IN SECTION
3, PLUS THOSE FROM THE BASE METAL AND COATING, ETC., AS NOTED
ABOVE. REASONABLY EXPECTED FUME CONSTITUENTS PRODUCED DURING ARC WELDING
AND BRAZING INCLUDE THE OXIDES OF IRON, MANGANESE AND OTHER METALS PRESENT
IN THE WELDING CONSUMABLE OR BASE METAL. HEXAVALENT CHROMIUM COMPOUNDS MAY
BE IN THE WELDING OR BRAZING FUME OF CONSUMABLES OR BASE METALS WHICH
CONTAIN CHROMIUM. GASEOUS AND PARTICULATE FLUORIDE MAY BE IN THE FUME
OF CONSUMABLES OR FLUX MATERIALS WHICH CONTAIN FLUORIDE. GASEOUS
REACTION PRODUCTS MAY INCLUDE CARBON MONOXIDE AND CARBON DIOXIDE. OZONE
AND NITROGEN OXIDES MAY BE FORMED BY THE RADIATION FROM THE ARC
ASSOCIATED WITH WELDING.
| 11. TOXICOLOGICAL INFORMATION | |
GENERAL INFORMATION:
THE INTERNATIONAL AGENCY FOR RESEARCH ON CANCER (IARC) HAS DETERMINED
WELDING FUMES AND ULTRAVIOLET RADIATION FROM WELDING ARE CARCINOGENIC
TO HUMANS (GROUP 1). ACCORDING TO IARC, WELDING FUMES CAUSE CANCER OF
THE LUNG AND POSITIVE ASSOCIATIONS HAVE BEEN OBSERVED WITH CANCER OF
THE KIDNEY. ALSO ACCORDING TO IARC, ULTRAVIOLET RADIATION FROM WELDING
CAUSES OCULAR MELANOMA. IARC IDENTIFIES GOUGING, BRAZING, CARBON ARC
OR PLASMA ARC CUTTING, AND SOLDERING AS PROCESSES CLOSELY RELATED TO
WELDING. READ AND UNDERSTAND THE MANUFACTURER'S INSTRUCTIONS, SAFETY
DATA SHEETS AND THE PRECAUTIONARY LABELS BEFORE USING THIS PRODUCT.
INFORMATION ON LIKELY ROUTES OF EXPOSURE:
INHALATION:
POTENTIAL CHRONIC HEALTH HAZARDS RELATED TO THE USE OF WELDING
CONSUMABLES ARE MOST APPLICABLE TO THE INHALATION ROUTE OF EXPOSURE.
REFER TO INHALATION STATEMENTS IN SECTION 11.
SKIN CONTACT:
ARC RAYS CAN BURN SKIN. SKIN CANCER HAS BEEN REPORTED.
EYE CONTACT: ARC RAYS CAN INJURE EYES.
INGESTION:
HEALTH INJURIES FROM INGESTION ARE NOT KNOWN OR EXPECTED UNDER NORMAL USE.
SYMPTOMS RELATED TO THE PHYSICAL, CHEMICAL AND TOXICOLOGICAL
CHARACTERISTICS:
INHALATION:
SHORT-TERM (ACUTE) OVEREXPOSURE TO FUMES AND GASES FROM WELDING AND
ALLIED PROCESSES MAY RESULT IN DISCOMFORT SUCH AS METAL FUME
FEVER, DIZZINESS, NAUSEA, OR DRYNESS OR IRRITATION OF NOSE, THROAT, OR
EYES. MAY AGGRAVATE PRE-EXISTING RESPIRATORY PROBLEMS (E.G.
ASTHMA, EMPHYSEMA). LONG-TERM (CHRONIC) OVEREXPOSURE TO FUMES AND GASES
FROM WELDING AND ALLIED PROCESSES CAN LEAD TO SIDEROSIS (IRON DEPOSITS
IN LUNG), CENTRAL NERVOUS SYSTEM EFFECTS, BRONCHITIS AND OTHER
PULMONARY EFFECTS.
INFORMATION ON TOXICOLOGICAL EFFECTS:
ACUTE TOXICITY (LIST ALL POSSIBLE ROUTES OF EXPOSURE):
ORAL:
PRODUCT: NOT CLASSIFIED
SPECIFIED SUBSTANCE(S):
IRON:
LD 50 (RAT): 98.6 G/KG
COPPER AND/OR COPPER ALLOYS AND COMPOUNDS (AS Cu):
LD 50 (RAT): 481 MG/KG
DERMAL:
PRODUCT: NOT CLASSIFIED
INHALATION:
PRODUCT: NOT CLASSIFIED
SPECIFIED SUBSTANCE(S):
ALUMINUM AND/OR ALUMINUM ALLOYS (AS Al):
LC 50 (RAT, 1 H): 7.6 MG/L
REPEATED DOSE TOXICITY:
PRODUCT: NOT CLASSIFIED
SKIN CORROSION/IRRITATION:
PRODUCT: NOT CLASSIFIED
SERIOUS EYE DAMAGE/EYE IRRITATION:
PRODUCT: NOT CLASSIFIED
RESPIRATORY OR SKIN SENSITIZATION:
PRODUCT: NOT CLASSIFIED
CARCINOGENICITY:
PRODUCT:
ARC RAYS: SKIN CANCER HAS BEEN REPORTED.
IARC MONOGRAPHS ON THE EVALUATION OF CARCINOGENIC RISKS TO HUMANS:
NO CARCINOGENIC COMPONENTS IDENTIFIED
US. NATIONAL TOXICOLOGY PROGRAM (NTP) REPORT ON CARCINOGENS:
NO CARCINOGENIC COMPONENTS IDENTIFIED
US. OSHA SPECIFICALLY REGULATED SUBSTANCES (29 CFR 1910.1001-1050):
NO CARCINOGENIC COMPONENTS IDENTIFIED
GERM CELL MUTAGENICITY:
IN VITRO:
PRODUCT: NOT CLASSIFIED
IN VIVO:
PRODUCT: NOT CLASSIFIED
REPRODUCTIVE TOXICITY:
PRODUCT: NOT CLASSIFIED
SPECIFIC TARGET ORGAN TOXICITY - SINGLE EXPOSURE:
PRODUCT: NOT CLASSIFIED
SPECIFIC TARGET ORGAN TOXICITY - REPEATED EXPOSURE:
PRODUCT: NOT CLASSIFIED
ASPIRATION HAZARD:
PRODUCT: NOT CLASSIFIED
OTHER EFFECTS:
ORGANIC POLYMERS MAY BE USED IN THE MANUFACTURE OF VARIOUS
WELDING CONSUMABLES. OVEREXPOSURE TO THEIR DECOMPOSITION BYPRODUCTS
MAY RESULT IN A CONDITION KNOWN AS POLYMER FUME FEVER. POLYMER FUME
FEVER USUALLY OCCURS WITHIN 4 TO 8 HOURS OF EXPOSURE WITH THE PRESENTATION
OF FLU LIKE SYMPTOMS, INCLUDING MILD PULMONARY IRRITATION WITH OR WITHOUT
AN INCREASE IN BODY TEMPERATURE. SIGNS OF EXPOSURE CAN INCLUDE AN INCREASE
IN WHITE BLOOD CELL COUNT. RESOLUTION OF SYMPTOMS TYPICALLY OCCURS
QUICKLY, USUALLY NOT LASTING LONGER THAN 48
HOURS.
SYMPTOMS RELATED TO THE PHYSICAL, CHEMICAL AND TOXICOLOGICAL
CHARACTERISTICS UNDER THE CONDITION OF USE:
ADDITIONAL TOXICOLOGICAL INFORMATION UNDER THE CONDITIONS OF USE:
ACUTE TOXICITY:
INHALATION:
SPECIFIED SUBSTANCE(S):
CARBON DIOXIDE:
LC LO (HUMAN, 5 MIN): 90000 PPM
CARBON MONOXIDE:
LC 50 (RAT, 4 H): 1300 PPM
NITROGEN DIOXIDE:
LC 50 (RAT, 4 H): 88 PPM
OZONE:
LC LO (HUMAN, 30 MIN): 50 PPM
OTHER EFFECTS:
SPECIFIED SUBSTANCE(S):
CARBON DIOXIDE: ASPHYXIA
CARBON MONOXIDE: CARBOXYHEMOGLOBINEMIA
NITROGEN DIOXIDE: LOWER RESPIRATORY TRACT IRRITATION
| 12. ECOLOGICAL INFORMATION | |
ECOTOXICITY:
ACUTE HAZARDS TO THE AQUATIC ENVIRONMENT:
FISH:
PRODUCT: NOT CLASSIFIED
SPECIFIED SUBSTANCE(S):
ALUMINUM AND/OR ALUMINUM ALLOYS (AS Al):
LC 50 (GRASS CARP, WHITE AMUR (CTENOPHARYNGODON IDELLA), 96 H):
0.21 - 0.31 MG/L
COPPER AND/OR COPPER ALLOYS AND COMPOUNDS (AS Cu):
LC 50 (FATHEAD MINNOW (PIMEPHALES PROMELAS), 96 H): 1.6 MG/L
AQUATIC INVERTEBRATES:
PRODUCT: NOT CLASSIFIED
SPECIFIED SUBSTANCE(S):
COPPER AND/OR COPPER ALLOYS AND COMPOUNDS (AS Cu):
EC 50 (WATER FLEA (DAPHNIA MAGNA), 48 H): 0.102 MG/L
CHRONIC HAZARDS TO THE AQUATIC ENVIRONMENT:
FISH:
PRODUCT: NOT CLASSIFIED
AQUATIC INVERTEBRATES:
PRODUCT: NOT CLASSIFIED
TOXICITY TO AQUATIC PLANTS:
PRODUCT: NOT CLASSIFIED
SPECIFIED SUBSTANCE(S):
COPPER AND/OR COPPER ALLOYS AND COMPOUNDS (AS Cu):
LC 50 (GREEN ALGAE (SCENEDESMUS DIMORPHUS), 3 D): 0.0623 MG/L
PERSISTENCE AND DEGRADABILITY:
BIODEGRADATION:
PRODUCT: NO DATA AVAILABLE.
BIOACCUMULATIVE POTENTIAL:
BIOCONCENTRATION FACTOR (BCF):
PRODUCT: NO DATA AVAILABLE.
SPECIFIED SUBSTANCE(S):
COPPER AND/OR COPPER ALLOYS AND COMPOUNDS (AS Cu):
BLUE-GREEN ALGAE (ANACYSTIS NIDULANS), BIOCONCENTRATION FACTOR (BCF):
36.01 (STATIC)
MOBILITY IN SOIL: NO DATA AVAILABLE.
| 13. DISPOSAL CONSIDERATIONS | |
GENERAL INFORMATION:
THE GENERATION OF WASTE SHOULD BE AVOIDED OR MINIMIZED WHENEVER POSSIBLE.
WHEN PRACTICAL, RECYCLE IN AN ENVIRONMENTALLY ACCEPTABLE,
REGULATORY COMPLIANT MANNER. DISPOSE OF NON-RECYCLABLE PRODUCTS IN
ACCORDANCE WITH ALL APPLICABLE FEDERAL, STATE, PROVINCIAL, AND
LOCAL REQUIREMENTS.
DISPOSAL INSTRUCTIONS:
DISPOSE OF THIS MATERIAL AND ITS CONTAINER TO HAZARDOUS OR SPECIAL
WASTE COLLECTION POINT.
CONTAMINATED PACKAGING:
DISPOSE OF CONTENTS/CONTAINER TO AN APPROPRIATE TREATMENT AND
DISPOSAL FACILITY IN ACCORDANCE WITH APPLICABLE LAWS AND REGULATIONS,
AND PRODUCT CHARACTERISTICS AT TIME OF
DISPOSAL.
| 14. TRANSPORT INFORMATION | |
DOT:
UN NUMBER:
UN PROPER SHIPPING NAME: NOT DG REGULATED
TRANSPORT HAZARD CLASS(ES):
CLASS: NR
LABEL(S):
PACKING GROUP:
MARINE POLLUTANT: NO
IMDG:
UN NUMBER:
UN PROPER SHIPPING NAME: NOT DG REGULATED
TRANSPORT HAZARD CLASS(ES):
CLASS: NR
LABEL(S):
EMS NO.:
PACKING GROUP:
MARINE POLLUTANT: NO
IATA:
UN NUMBER:
PROPER SHIPPING NAME: NOT DG REGULATED
TRANSPORT HAZARD CLASS(ES):
CLASS: NR
LABEL(S):
PACKING GROUP:
MARINE POLLUTANT: NO
CARGO AIRCRAFT ONLY: ALLOWED.
TDG:
UN NUMBER:
UN PROPER SHIPPING NAME: NOT DG REGULATED
TRANSPORT HAZARD CLASS(ES):
CLASS: NR
LABEL(S):
PACKING GROUP:
MARINE POLLUTANT: NO
| 15. REGULATORY INFORMATION | |
US FEDERAL REGULATIONS:
TSCA SECTION 12(B) EXPORT NOTIFICATION (40 CFR 707, SUBPT. D):
NONE PRESENT OR NONE PRESENT IN REGULATED QUANTITIES.
US. OSHA SPECIFICALLY REGULATED SUBSTANCES (29 CFR 1910.1001-1050):
NONE PRESENT OR NONE PRESENT IN REGULATED QUANTITIES.
CERCLA HAZARDOUS SUBSTANCE LIST (40 CFR 302.4):
CHEMICAL IDENTITY REPORTABLE QUANTITY
COPPER AND/OR COPPER ALLOYS AND COMPOUNDS (AS Cu) 5000 LBS.
SUPERFUND AMENDMENTS AND REAUTHORIZATION ACT OF 1986 (SARA):
HAZARD CATEGORIES: NOT CLASSIFIED
SARA 302 EXTREMELY HAZARDOUS SUBSTANCE:
NONE PRESENT OR NONE PRESENT IN REGULATED QUANTITIES.
SARA 304 EMERGENCY RELEASE NOTIFICATION:
CHEMICAL IDENTITY REPORTABLE QUANTITY
COPPER AND/OR COPPER ALLOYS AND COMPOUNDS (AS Cu) 5000 LBS.
SARA 311/312 HAZARDOUS CHEMICAL:
CHEMICAL IDENTITY THRESHOLD PLANNING QUANTITY
ALUMINUM AND/OR ALUMINUM ALLOYS (AS Al) 10000 LBS
SILICON 10000 LBS
IRON 10000 LBS
COPPER AND/OR COPPER ALLOYS AND COMPOUNDS 10000 LBS
(AS Cu)
SARA 313 (TRI REPORTING):
CHEMICAL IDENTITY REPORTING THRESHOLD REPORTING THRESHOLD FOR
FOR OTHER USERS MANUFACTURING AND PROCESSING
ALUMINUM AND/OR 10000 LBS 25000 LBS.
ALUMINUM ALLOYS
(AS Al)
CLEAN WATER ACT SECTION 311 HAZARDOUS SUBSTANCES (40 CFR 117.3):
NONE PRESENT OR NONE PRESENT IN REGULATED QUANTITIES.
CLEAN AIR ACT (CAA) SECTION 112(R) ACCIDENTAL RELEASE PREVENTION (40 CFR
68.130): NONE PRESENT OR NONE PRESENT IN REGULATED QUANTITIES.
US STATE REGULATIONS:
US. CALIFORNIA PROPOSITION 65:
NO INGREDIENT REGULATED BY CA PROP 65 PRESENT.
WARNING:
THIS PRODUCT CONTAINS OR PRODUCES A CHEMICAL KNOWN TO THE STATE OF
CALIFORNIA TO CAUSE CANCER AND BIRTH DEFECTS (OR OTHER REPRODUCTIVE HARM).
(CALIFORNIA HEALTH & SAFETY CODE SECTION 25249.5 ET SEQ.)
WARNING: CANCER AND REPRODUCTIVE HARM - WWW.P65WARNINGS.CA.GOV
US. NEW JERSEY WORKER AND COMMUNITY RIGHT-TO-KNOW ACT:
CHEMICAL IDENTITY:
ALUMINUM AND/OR ALUMINUM ALLOYS (AS Al)
SILICON
US. MASSACHUSETTS RTK - SUBSTANCE LIST:
NO INGREDIENT REGULATED BY MA RIGHT-TO-KNOW LAW PRESENT.
US. PENNSYLVANIA RTK - HAZARDOUS SUBSTANCES:
CHEMICAL IDENTITY:
ALUMINUM AND/OR ALUMINUM ALLOYS (AS Al)
SILICON
US. RHODE ISLAND RTK:
NO INGREDIENT REGULATED BY RI RIGHT-TO-KNOW LAW PRESENT.
CANADA FEDERAL REGULATIONS:
LIST OF TOXIC SUBSTANCES (CEPA, SCHEDULE 1):
CHEMICAL IDENTITY: ALUMINUM AND/OR ALUMINUM ALLOYS (AS Al)
EXPORT CONTROL LIST (CEPA 1999, SCHEDULE 3): NOT REGULATED
NATIONAL POLLUTANT RELEASE INVENTORY (NPRI):
CANADA. NATIONAL POLLUTANT RELEASE INVENTORY (NPRI) SUBSTANCES, PART 5,
VOCS WITH ADDITIONAL REPORTING REQUIREMENTS:
NPRI PT5: NOT REGULATED
CANADA. NATIONAL POLLUTANT RELEASE INVENTORY (NPRI) (SCHEDULE 1, PARTS
1-4):
NPRI: NOT REGULATED
GREENHOUSE GASES: NOT REGULATED
CONTROLLED DRUGS AND SUBSTANCES ACT:
CA CDSI: NOT REGULATED
CA CDSII: NOT REGULATED
CA CDSIII: NOT REGULATED
CA CDSIV: NOT REGULATED
CA CDSV: NOT REGULATED
CA CDSVII: NOT REGULATED
CA CDSVIII: NOT REGULATED
PRECURSOR CONTROL REGULATIONS: NOT REGULATED
MEXICO. SUBSTANCES SUBJECT TO REPORTING FOR THE POLLUTANT RELEASE AND
TRANSFER REGISTRY (PRTR): NOT APPLICABLE
INVENTORY STATUS:
AUSTRALIA AICS: ON OR IN COMPLIANCE WITH THE INVENTORY
CANADA DSL INVENTORY LIST:
ON OR IN COMPLIANCE WITH THE INVENTORY
EINECS, ELINCS OR NLP:
ON OR IN COMPLIANCE WITH THE INVENTORY
JAPAN (ENCS) LIST:
ONE OR MORE COMPONENTS ARE NOT LISTED OR ARE EXEMPT FROM LISTING.
CHINA INV. EXISTING CHEMICAL SUBSTANCES:
ON OR IN COMPLIANCE WITH THE INVENTORY
KOREA EXISTING CHEMICALS INV. (KECI):
ON OR IN COMPLIANCE WITH THE INVENTORY
CANADA NDSL INVENTORY:
ONE OR MORE COMPONENTS ARE NOT LISTED OR ARE EXEMPT FROM LISTING.
PHILIPPINES PICCS: ON OR IN COMPLIANCE WITH THE INVENTORY
US TSCA INVENTORY: ON OR IN COMPLIANCE WITH THE INVENTORY
NEW ZEALAND INVENTORY OF CHEMICALS: ON OR IN COMPLIANCE WITH THE INVENTORY
JAPAN ISHL LISTING:
ONE OR MORE COMPONENTS ARE NOT LISTED OR ARE EXEMPT FROM LISTING.
JAPAN PHARMACOPOEIA LISTING:
ONE OR MORE COMPONENTS ARE NOT LISTED OR ARE EXEMPT FROM LISTING.
MEXICO INSQ: ON OR IN COMPLIANCE WITH THE INVENTORY
ONTARIO INVENTORY: ON OR IN COMPLIANCE WITH THE INVENTORY
TAIWAN CHEMICAL SUBSTANCE INVENTORY: ON OR IN COMPLIANCE WITH THE INVENTORY
| 16. OTHER INFORMATION | |
DEFINITIONS:
REVISION DATE: 11/03/2018
FURTHER INFORMATION: ADDITIONAL INFORMATION IS AVAILABLE BY REQUEST.
DISCLAIMER:
THE LINCOLN ELECTRIC COMPANY URGES EACH END USER AND RECIPIENT OF THIS SDS
TO STUDY IT CAREFULLY. SEE ALSO WWW.LINCOLNELECTRIC.COM/SAFETY. IF
NECESSARY, CONSULT AN INDUSTRIAL HYGIENIST OR OTHER EXPERT TO UNDERSTAND
THIS INFORMATION AND SAFEGUARD THE ENVIRONMENT AND PROTECT WORKERS
FROM POTENTIAL HAZARDS ASSOCIATED WITH THE HANDLING OR USE OF THIS
PRODUCT. THIS INFORMATION IS BELIEVED TO BE ACCURATE AS OF THE REVISION
DATE SHOWN ABOVE. HOWEVER, NO WARRANTY, EXPRESSED OR IMPLIED, IS
GIVEN. BECAUSE THE CONDITIONS OR METHODS OF USE ARE BEYOND LINCOLN
ELECTRIC'S CONTROL, WE ASSUME NO LIABILITY RESULTING FROM THE USE OF
THIS PRODUCT. REGULATORY REQUIREMENTS ARE SUBJECT TO CHANGE AND MAY
DIFFER BETWEEN VARIOUS LOCATIONS. COMPLIANCE WITH ALL APPLICABLE
FEDERAL, STATE, PROVINCIAL, AND LOCAL LAWS AND REGULATIONS REMAIN
THE RESPONSIBILITY OF THE USER.
(C) 2018 LINCOLN GLOBAL, INC. ALL RIGHTS RESERVED.
SDS_NORTH AMERICA - 200000000315