| Common Name: | POLISHING COMPOUND, 12U074 |
| Manufacturer: | GRAINGER GLOBAL SOURCING |
| SDS Revision Date: | 7/25/2011 |
| SDS Format: | GHS-US |
| Item Number(s): | 12U074 |
| Manufacturer Model Number(s): |
SDS Table of Contents
Click the desired link below to jump directly to that section in the SDS.
| 1. IDENTIFICATION |  |
PRODUCT NAME: POLISHING COMPOUND
GGS SKU#: 12U074
PRODUCT USE: BUFFING AND / OR POLISHING
NAME, ADDRESS, AND TELEPHONE NUMBER OF THE MANUFACTURER, IMPORTER, OR OTHER
RESPONSIBLE PARTY:
GRAINGER GLOBAL SOURCING
100 GRAINGER PARKWAY
LAKE FOREST, IL 60045
USA
847-535-1000
(E) EMERGENCY PHONE NUMBER.
IN CASE OF EMERGENCY, CONTACT:
GRAINGER TECHNICAL SUPPORT AT: 1-800-356-2501
| 2A HAZARD(S) IDENTIFICATION | |
EMERGENCY OVERVIEW: MAY CAUSE RESPIRATORY, SKIN & EYE IRRITATION
TARGET ORGANS: RESPIRATORY SYSTEMS, EYES
INHALATION: MAY CAUSE RESPIRATORY TRACT IRRITATIONS
EYE CONTACT: MAY CAUSE IRRITATION, TEMPORARY REDNESS AND DISCOMFORT
SKIN CONTACT: MAY CAUSE SKIN IRRITATION
INGESTION: MAY CAUSE GASTROINTESTINAL IRRITATION
HEALTH HAZARD
FLAME
SKULLS AND CROSSBONES
SIGNAL WORD: DANGER
2B HAZARD & PRECAUTIONARY STATEMENTS:
H314: CAUSES SEVERE BURNS AND EYE DAMAGE
H242: HEATING MAY CAUSE A FIRE
H300: FATAL IF SWALLOWED
H334:
MAY CAUSE ALLERGY OR ASTHMA SYMPTOMS OR BREATHING DIFFICULTIES IF INHALED
P210: KEEP AWAY FROM HEAT/SPARKS/OPEN FLAMES/HOT SURFACES. NO SMOKING.
P301+P330+P331:
IF SWALLOWED: RINSE MOUTH. DO NOT INDUCE VOMITING
P264: WASH EXPOSED SKIN THOROUGHLY AFTER HANDLING
P280: WEAR PROTECTIVE GLOVES, EYE PROTECTION
P303+P361+P353:
IF ON SKIN (OR HAIR):
REMOVE/TAKE OFF IMMEDIATELY ALL CONTAMINATED CLOTHING. RINSE SKIN WITH
WATER/SHOWER
P304+P340:
IF INHALED:
REMOVE VICTIM TO FRESH AIR AND KEEP AT REST IN A POSITION COMFORTABLE FOR
BREATHING
P305+P351+P338:
IF IN EYES:
RINSE CAUTIOUSLY WITH WATER FOR SEVERAL MINUTES. REMOVE CONTACT LENSES, IF
PRESENT AND EASY TO DO. CONTINUE RINSING
P310: IMMEDIATELY CALL A POISON CENTER OR DOCTOR/PHYSICIAN
P363: WASH CONTAMINATED CLOTHING BEFORE REUSE
P405: STORE LOCKED UP
P501:
DISPOSE OF CONTENTS/CONTAINER TO COMPLY WITH LOCAL, STATE AND FEDERAL
REGULATIONS
P260: DO NOT BREATHE DUST/FUME/GAS/MIST/VAPOURS/SPRAY
OTHER HAZARD: NONE
ACUTE TOXICITY: NO DATA AVAILABLE
| 3. COMPOSITION/INFORMATION ON INGREDIENTS | |
HAZARDOUS COMPOSITION % OSHA PEL CAS NO. ACGIH TLV
TRIGLYCERIDE 8-10 NA 61789-97-7 NA
TALLOW 5-7 NA 67701-27-3 NA
PLANT OIL 10-12 NA 8002-9-3 NA
ALUMINUM OXIDE 40-45 NA 1344-28-1 NA
SILICON OXIDE 20-25 NA 7631-86-9 NA
| 4. FIRST-AID MEASURES | |
INHALATION (BEARING): EVACUATE TO WHERE FRESH AIR IS AVAILABLE.
EYES:
IF IRRITATION OR REDNESS OCCUR, EVACUATE TO WHERE FRESH AIR IS AVAILABLE.
UPON CONTACT, IMMEDIATELY FLUSH EYES WITH PLENTY OF WATER, HOLDING EYELIDS
APART, FOR 15 MINUTES.
SKIN:
WASH WITH SOAP AND WATER. OBTAIN FIRST AID AND/OR MEDICAL ASSISTANCE IF
SYMPTOMS PERSIST
INGESTION:
OBTAIN FIRST AID OR MEDICAL ASSISTANCE WHEN NEEDED. OTHER POTENTIAL HEALTH
RISKS (PROLONGED INHALATION OF DUST PARTICLES MAY RESULT IN PULMONARY
FIBROSIS.
CARCINOGENICITY:
NTP: NOT REQUIRED
IARC: NOT REPORTED
OSHA: NOT REPORTED
REGULAR CONSTANT VIGILANCE IN SAFETY AND MAINTENANCE CHECK-UP PROGRAMS ARE
ADVISED TO REDUCE RISKS ASSOCIATED WITH BUFFING AND POLISHING OPERATIONS.
| 5. FIRE-FIGHTING MEASURES | |
FLASH POINT (METHOD USED): >300 DEGREES F C.O.C.
FLAMMABLE LIMITS: NOT ESTABLISHED
LEL:
UEL:
EXTINGUISHING MEDIA: CO2 - DRY CHEMICAL, FOAM, WATER FOG.
SPECIAL FIRE FIGHTING PROCEDURES:
DRY POLISHING COMPOUND AND BUFFING WHEEL LINT AND DEBRIS MAY MAKE THE MIX
COMBUSTIBLE. TREAT AS AN OIL FIRE.
UNUSUAL FIRE AND EXPLOSION HAZARDS:
NONE FOR NEW AND UNUSED STORED MATERIAL.
| 6. ACCIDENTAL RELEASE MEASURES | |
WEAR SUITABLE PROTECTIVE EQUIPMENT. CLEAN UP SPILLS IMMEDIATELY. PREVENT
FROM ENTERING SOIL, DITCHES, SEWERS, WATERWAYS, & GROUNDWATER. DISPOSE OF
IN A SECURED SANITARY LANDFILL IN ACCORDANCE WITH FEDERAL, STATE, AND LOCAL
REGULATIONS.
| 7. HANDLING AND STORAGE | |
KEEP AWAY FROM HEAT, SPARKS, OR FLAME. WHERE FLAMMABLE MIXTURES MAYBE
PRESENT, EQUIPMENT SAFETY FOR SUCH LOCATIONS SHOULD BE USED. USE CLEAN,
SPARK PROOF TOOLS AND EXPLOSION-PROOF EQUIPMENT. WHEN TRANSFERRING PRODUCT,
METAL CONTAINERS, INCLUDING TRUCKS AND TANK CARS, SHOULD BE GROUNDED AND
BONDED. DO NOT BREATHE VAPOR OR DUST. USE IN A WELL VENTILATED AREA. AVOID
CONTACT WITH EYES, SKIN, CLOTHING, AND SHOES. DO NOT SMOKE WHILE USING THIS
PRODUCT.
KEEP CONTAINER TIGHTLY CLOSED WHEN NOT IN USE AND DURING TRANSPORT. STORE
CONTAINERS IN A COOL, DRY PLACE. DO NO PRESSURIZE, CUT, WELD, BRAZE,
SOLDER, DRILL, OR GRIND CONTAINERS. KEEP CONTAINERS AWAY FROM HEAT, FLAME,
SPARKS, STATIC ELECTRICITY, OR OTHER SOURCES OF IGNITION. EMPTY PRODUCT
CONTAINERS MAY RETAIN PRODUCT RESIDUE AND CAN BE DANGEROUS.
| 8. EXPOSURE CONTROLS/PERSONAL PROTECTION | |
RESPIRATORY PROTECTION (SPECIFY TYPE):
OSHA 24 CFR/134 NIOSH/MSHA APPROVED RESPIRATORS FOR PARTICULATES FROM
BUFFING DEBRIS.
VENTILATION:
LOCAL EXHAUST: GENERAL ROOM VENTILATION.
MECHANICAL (GENERAL): RECOMMEND VENTING TO DUST COLLECTORS.
PROTECTIVE GLOVES: WEAR HEAVY-DUTY WORK-TYPE GLOVES FOR HAND PROTECTION.
EYE PROTECTION:
WEAR SAFETY GLASSES AND/OR FACE SHIELD HELMETS (SEE OSHA 29 CFR 1910.122
(SAFETY GLASSES).
OTHER PROTECTIVE CLOTHING OR EQUIPMENT:
PROTECTIVE WORK CLOTHING, BODY APRON OR BELLY PADS, SAFETY SHOES, AS
NEEDED.
HEARING PROTECTION:
AVOID PROLONGED EXCESSIVE NOISE LEVELS CREATED BY BUFFING AND POLISHING
OPERATIONS (SEE OSHA 29 CFR 1910.215 (HEARING PROTECTION).
THE INFORMATION AND RECOMMENDATIONS SET FORTH HEREIN ARE TAKEN FROM SOURCES
BELIEVED TO BE ACCURATE AS OF THE DATE HEREOF; HOWEVER, BEILUN FUTUO MAKES
NO WARRANTY WITH RESPECT TO THE ACCURACY OF THE INFORMATION OR THE
SUITABILITY OF THE RECOMMENDATION, AND ASSUMES NO LIABILITY TO ANY USER
THEREOF.
| 9. PHYSICAL AND CHEMICAL PROPERTIES | |
PHYSICAL STATE: BROWN PASTE, SOLVENT ODOR.
APPEARANCE, AND ODOR: 0.09 PPM (BASED ON KEROSENE)
MOLECULAR WEIGHT: NOT AVAILABLE.
SPECIFIC GRAVITY: 1.2(WATER=1) (APPROXIMATELY)
DENSITY: 10 LB/US GAL(1200 G/L) (APPROXIMATELY)
VAPOR DENSITY: GREATER THAN 1 (AIR = 1)
VAPOR PRESSURES: 5 MMHg AT 100 DEG. F (38 DEG. C ) (MAXIMUM)
BOILING POINT: GREATER THAN 212 DEG. F(100 DEG. C )
FREEZING/MELTING POINT: NOT AVAILABLE
PH: NOT AVAILABLE
EVAPORATION RATE: LESS THAN 1 (BUTYL ACETATE=1)
SOLUBILITY IN WATER: SLIGHT
SOLUBILITY IN WATER: SLIGHT
FLASH POINT: 195 DEG. F(91 DEG. C )PENSKY-MARTENS CLOSED CUP
FLAMMABLE LIMITS IN AIR:
LOWER: 0.7 VOL% (MINIMUM)
UPPER: 5.0 VOL%(MAXIMUM)
AUTOIGNITION TEMPERATURE: 410 DEG. F(210 DEG. C) (APPROXIMATELY)
| 10. STABILITY AND REACTIVITY | |
STABILITY: STABLE
INCOMPATIBILITY (MATERIALS TO AVOID): STRONG OXIDIZERS OR REDUCING AGENTS
HAZARDOUS DECOMPOSITION OR BY PRODUCTS:
DUST FROM MACHINING COULD CONTAIN INGREDIENTS LISTED IN SECTION 2 AND
OTHER, POTENTIALLY MORE HAZARDOUS COMPONENTS OF THE BASE MATERIAL BEING
MACHINED OR COATINGS APPLIED TO THE BASE MATERIAL. COMBUSTION WILL FORM
OXIDES OF CARBON AND SMOKE.
HAZARDOUS POLYMERIZATION: NONE
| 11. TOXICOLOGICAL INFORMATION | |
N/A
| 12. ECOLOGICAL INFORMATION (NON-MANDATORY) | |
N/A
| 13. DISPOSAL CONSIDERATIONS (NON-MANDATORY) | |
N/A
| 14. TRANSPORT INFORMATION (NON-MANDATORY) | |
N/A
| 15. REGULATORY INFORMATION (NON-MANDATORY) | |
N/A
| 16. OTHER INFORMATION, INCLUDING DATE OF PREPARATION | |
OR LAST REVISION
7/25/2011