| Common Name: | 238466 PRO 2-GLK 2PK ES PRO FLR COAT DUNES TAN, SEM-EPOXY 1-GL 2PK 9100 ACTVTR P |
| Manufacturer: | RUST-OLEUM |
| SDS Revision Date: | 7/22/2015 |
| SDS Format: | GHS-US |
| Item Number(s): | 1TBG3 |
| Manufacturer Model Number(s): |
SDS Table of Contents
Click the desired link below to jump directly to that section in the SDS.
RUST-OLEUM CORPORATION
REVISION DATE: 7/22/2015
RUST-OLEUM MULTI COMPONENT PRODUCT INFORMATION SHEET
238466 PRO 2-GLK 2PK ES PRO FLR COAT DUNES TAN IS A MULTI COMPONENT PRODUCT
COMPOSED OF THE FOLLOWING INDIVIDUAL CHEMICAL COMPONENTS:
214556 SEM-EPOXY 1-GL 2PK 9100 ACTVTR PART A
238549 SEM-EPOXY 1-GL 2PK PRO BASE DUNE TAN
210542 MISC. EPOXY SHIELD TAN CHIPS
SDSS FOR EACH COMPONENT FOLLOW THIS COVER SHEET.
TRANSPORTATION INFORMATION:
DOMESTIC INTERNATIONAL AIR (IATA) TDG (CANADA)
(USDOT) (IMDG)
UN NUMBER N.A 1263 1263 N.A
PROPER SHIPPING NAME PAINT PAINT PAINT PAINT
PRODUCTS IN PRODUCTS IN
LIMITED LIMITED
QUANTITES QUANTITES
HAZARD CLASS N.A. 3 3 N.A.
PACKING GROUP N.A. III III N.A.
LIMITED QUANTITY YES YES YES YES
FINISHED GOOD SCHEDULE B HARMONIZED TARIFF CODE: 3907.30.0000
DATE PRINTED: 7/22/2015
SAFETY DATA SHEET
RUST-OLEUM CORPORATION
TRUSTED QUALITY SINCE 1921
WWW.RUSTOLEUM.COM
| 1. IDENTIFICATION |  |
PRODUCT NAME: SEM-EPOXY 1-GL 2PK 9100 ACTVTR PART A
PRODUCT IDENTIFIER: 214556
PRODUCT USE/CLASS: FLOOR COATING/EPOXY ACTIVATOR
REVISION DATE: 7/21/2015
SUPERCEDES DATE: NEW SDS
SUPPLIER:
RUST-OLEUM CORPORATION
11 HAWTHORN PARKWAY
VERNON HILLS, IL 60061
USA
MANUFACTURER:
RUST-OLEUM CORPORATION
11 HAWTHORN PARKWAY
VERNON HILLS, IL 60061
USA
PREPARER: REGULATORY DEPARTMENT
EMERGENCY TELEPHONE:
24 HOUR HOTLINE: 847-367-7700
| 2. HAZARD IDENTIFICATION | |
CLASSIFICATION:
SYMBOL(S) OF PRODUCT:
FLAME
CORROSION
EXCLAMATION MARK
SIGNAL WORD: DANGER
POSSIBLE HAZARDS:
80% OF THE MIXTURE CONSISTS OF INGREDIENT(S) OF UNKNOWN ACUTE TOXICITY.
GHS HAZARD STATEMENTS:
FLAMMABLE LIQUID, CATEGORY 3:
H226: FLAMMABLE LIQUID AND VAPOUR.
ACUTE TOXICITY, ORAL, CATEGORY 4:
H302: HARMFUL IF SWALLOWED.
SKIN IRRITATION, CATEGORY 2:
H315: CAUSES SKIN IRRITATION.
SERIOUS EYE DAMAGE, CATEGORY 1:
H318: CAUSES SERIOUS EYE DAMAGE.
ACUTE TOXICITY, INHALATION, CATEGORY 4:
H332: HARMFUL IF INHALED.
GHS LABEL PRECAUTIONARY STATEMENTS:
P210:
KEEP AWAY FROM HEAT, HOT SURFACES, SPARKS, OPEN FLAMES AND OTHER IGNITION
SOURCES. NO SMOKING.
P261: AVOID BREATHING DUST/FUME/GAS/MIST/VAPOURS/SPRAY.
P280:
WEAR PROTECTIVE GLOVES/PROTECTIVE CLOTHING/EYE PROTECTION/FACE PROTECTION.
P302+P352:
IF ON SKIN: WASH WITH PLENTY OF SOAP AND WATER.
P305+P351+P338:
IF IN EYES:
RINSE CAUTIOUSLY WITH WATER FOR SEVERAL MINUTES. REMOVE CONTACT LENSES, IF
PRESENT AND EASY TO DO. CONTINUE RINSING.
P310: IMMEDIATELY CALL A POISON CENTER OR DOCTOR/PHYSICIAN.
P362: TAKE OFF CONTAMINATED CLOTHING.
GHS SDS PRECAUTIONARY STATEMENTS:
P240: GROUND/BOND CONTAINER AND RECEIVING EQUIPMENT.
P241: USE EXPLOSION-PROOF ELECTRICAL/VENTILATING/LIGHTING/EQUIPMENT.
P242: USE ONLY NON-SPARKING TOOLS.
P243: TAKE PRECAUTIONARY MEASURES AGAINST STATIC DISCHARGE.
P270: DO NO EAT, DRINK OR SMOKE WHEN USING THIS PRODUCT.
| 3. COMPOSITION/INFORMATION ON INGREDIENTS | |
HAZARDOUS SUBSTANCES:
CHEMICAL NAME CAS-NO. WT.% GHS SYMBOLS GHS STATEMENTS
RANGE
LIMESTONE 1317-65-3 50-75 NO INFORMATION NO INFORMATION
POLYAMIDE RESIN 68424-41-9 10-25 NO INFORMATION NO INFORMATION
XYLENE 1330-20-7 2.5-10 GHS02-GHS07 H226-312-315-332
(MIXED ISOMERS)
N-BUTANOL 71-36-3 2.5-10 GHS02-GHS05- H226-302-315-
GHS07 318-332-335-336
ETHYLBENZENE 100-41-4 1.0-2.5 GHS02-GHS07 H225-332
4-NONYLPHENOL, 84852-15-3 1.0-2.5 GHS05-GHS07- H302-314-361
BRANCHED GHS08
TRIETHYLENETETRAMINE 112-24-3 0.1-1.0 GHS05-GHS06 H311-314-317
ORTHO-XYLENE 95-47-6 0.1-1.0 GHS02-GHS06 H226-312-315-331
| 4. FIRST-AID MEASURES | |
FIRST AID - EYE CONTACT:
IMMEDIATELY FLUSH EYES WITH PLENTY OF WATER FOR AT LEAST 15 MINUTES HOLDING
EYELIDS OPEN. GET MEDICAL ATTENTION. DO NOT ALLOW RUBBING OF EYES OR
KEEPING EYES CLOSED.
FIRST AID - SKIN CONTACT:
WASH SKIN WITH SOAP AND WATER. REMOVE CONTAMINATED CLOTHING. GET MEDICAL
ATTENTION IF IRRITATION DEVELOPS OR PERSISTS.
FIRST AID - INHALATION:
REMOVE TO FRESH AIR. IF NOT BREATHING, GIVE ARTIFICIAL RESPIRATION.
IF BREATHING IS DIFFICULT, GIVE OXYGEN. GET IMMEDIATE MEDICAL ATTENTION.
DO NOT USE MOUTH-TO-MOUTH RESUSCITATION. IF YOU EXPERIENCE DIFFICULTY IN
BREATHING, LEAVE THE AREA TO OBTAIN FRESH AIR. IF CONTINUED DIFFICULTY IS
EXPERIENCED, GET MEDICAL ASSISTANCE IMMEDIATELY.
FIRST AID - INGESTION:
ASPIRATION HAZARD:
DO NOT INDUCE VOMITING OR GIVE ANYTHING BY MOUTH BECAUSE THIS MATERIAL CAN
ENTER THE LUNGS AND CAUSE SEVERE LUNG DAMAGE. GET IMMEDIATE MEDICAL
ATTENTION. IF SWALLOWED, GET MEDICAL ATTENTION.
| 5. FIRE-FIGHTING MEASURES | |
EXTINGUISHING MEDIA:
ALCOHOL FILM FORMING FOAM, CARBON DIOXIDE, DRY CHEMICAL, WATER FOG
UNUSUAL FIRE AND EXPLOSION HAZARDS:
CLOSED CONTAINERS MAY EXPLODE WHEN EXPOSED TO EXTREME HEAT DUE TO BUILDUP
OF STEAM. VAPORS MAY FORM EXPLOSIVE MIXTURES WITH AIR. KEEP CONTAINERS
TIGHTLY CLOSED. ISOLATE FROM HEAT, ELECTRICAL EQUIPMENT, SPARKS AND OPEN
FLAME. NO UNUSUAL FIRE OR EXPLOSION HAZARDS NOTED.
SPECIAL FIREFIGHTING PROCEDURES:
WATER MAY BE USED TO COOL CLOSED CONTAINERS TO PREVENT PRESSURE BUILDUP AND
POSSIBLE AUTOIGNITION OR EXPLOSION. EVACUATE AREA AND FIGHT FIRE FROM A
SAFE DISTANCE. USE WATER SPRAY TO KEEP FIRE-EXPOSED CONTAINERS COOL.
CONTAINERS MAY EXPLODE WHEN HEATED.
| 6. ACCIDENTAL RELEASE MEASURES | |
STEPS TO BE TAKEN IF MATERIAL IS RELEASED OR SPILLED:
CONTAIN SPILLED LIQUID WITH SAND OR EARTH. DO NOT USE COMBUSTIBLE MATERIALS
SUCH AS SAWDUST. REMOVE ALL SOURCES OF IGNITION, VENTILATE AREA AND REMOVE
WITH INERT ABSORBENT AND NON-SPARKING TOOLS. DISPOSE OF ACCORDING TO LOCAL,
STATE (PROVINCIAL) AND FEDERAL REGULATIONS. DO NOT INCINERATE CLOSED
CONTAINERS. VENTILATE AREA, ISOLATE SPILLED MATERIAL, AND REMOVE WITH INERT
ABSORBENT. DISPOSE OF CONTAMINATED ABSORBENT, CONTAINER, AND UNUSED
CONTENTS IN ACCORDANCE WITH LOCAL, STATE, AND FEDERAL REGULATIONS.
| 7. HANDLING AND STORAGE | |
HANDLING:
WASH THOROUGHLY AFTER HANDLING. WASH HANDS BEFORE EATING. REMOVE
CONTAMINATED CLOTHING AND LAUNDER BEFORE REUSE. USE ONLY WITH ADEQUATE
VENTILATION. FOLLOW ALL MSDS/LABEL PRECAUTIONS EVEN AFTER CONTAINER IS
EMPTIED BECAUSE IT MAY RETAIN PRODUCT RESIDUES. AVOID BREATHING FUMES,
VAPORS, OR MIST. AVOID CONTACT WITH EYES, SKIN AND CLOTHING.
STORAGE:
STORE IN A DRY, WELL VENTILATED PLACE. KEEP CONTAINER TIGHTLY CLOSED WHEN
NOT IN USE. KEEP CONTAINERS TIGHTLY CLOSED. ISOLATE FROM HEAT, ELECTRICAL
EQUIPMENT, SPARKS AND OPEN FLAME. DO NOT STORE ABOVE 120 DEG. F. STORE
LARGE QUANTITIES IN BUILDINGS DESIGNED AND PROTECTED FOR STORAGE OF NFPA
CLASS II COMBUSTIBLE LIQUIDS. KEEP AWAY FROM HEAT, SPARKS, FLAME AND
SOURCES OF IGNITION. AVOID EXCESS HEAT. PRODUCT SHOULD BE STORED IN TIGHTLY
SEALED CONTAINERS AND PROTECTED FROM HEAT, MOISTURE, AND FOREIGN MATERIALS.
| 8. EXPOSURE CONTROLS/PERSONAL PROTECTION | |
CHEMICAL NAME CAS-NO. WEIGHT % LESS THAN
LIMESTONE 1317-65-3 60.0
POLYAMIDE RESIN 68424-41-9 25.0
XYLENE (MIXED ISOMERS) 1330-20-7 10.0
N-BUTANOL 71-36-3 10.0
ETHYLBENZENE 100-41-4 5.0
4-NONYLPHENOL, BRANCHED 84852-15-3 5.0
TRIETHYLENETETRAMINE 112-24-3 1.0
ORTHO-XYLENE 95-47-6 1.0
CHEMICAL NAME ACGIH ACGIH OSHA OSHA
TLV-TWA TLV-STEL PEL-TWA PEL-CEILING
LIMESTONE N.E. N.E. 15 MG/M3 N.E.
POLYAMIDE RESIN N.E. N.E. N.E. N.E.
XYLENE (MIXED ISOMERS) 100 PPM 150 PPM 100 PPM N.E.
N-BUTANOL 20 PPM N.E. 100 PPM N.E.
ETHYLBENZENE 20 PPM N.E. 100 PPM N.E.
4-NONYLPHENOL, BRANCHED N.E. N.E. N.E. N.E.
TRIETHYLENETETRAMINE N.E. N.E. N.E. N.E.
ORTHO-XYLENE 100 PPM 150 PPM N.E. N.E.
PERSONAL PROTECTION:
ENGINEERING CONTROLS:
USE PROCESS ENCLOSURES, LOCAL EXHAUST VENTILATION, OR OTHER ENGINEERING
CONTROLS TO CONTROL AIRBORNE LEVELS BELOW RECOMMENDED EXPOSURE LIMITS.
PREVENT BUILD-UP OF VAPORS BY OPENING ALL DOORS AND WINDOWS TO ACHIEVE
CROSS-VENTILATION.
RESPIRATORY PROTECTION:
A RESPIRATORY PROTECTION PROGRAM THAT MEETS OSHA 1910.134 AND ANSI Z88.2
REQUIREMENTS MUST BE FOLLOWED WHENEVER WORKPLACE CONDITIONS WARRANT A
RESPIRATOR'S USE. A NIOSH/MSHA APPROVED AIR PURIFYING RESPIRATOR WITH AN
ORGANIC VAPOR CARTRIDGE OR CANISTER MAY BE PERMISSIBLE UNDER CERTAIN
CIRCUMSTANCES WHERE AIRBORNE CONCENTRATIONS ARE EXPECTED TO EXCEED EXPOSURE
LIMITS.
PROTECTION PROVIDED BY AIR PURIFYING RESPIRATORS IS LIMITED. USE A POSITIVE
PRESSURE AIR SUPPLIED RESPIRATOR IF THERE IS ANY POTENTIAL FOR AN
UNCONTROLLED RELEASE, EXPOSURE LEVELS ARE NOT KNOWN, OR IN ANY OTHER
CIRCUMSTANCES WHERE AIR PURIFYING RESPIRATORS MAY NOT PROVIDE ADEQUATE
PROTECTION.
SKIN PROTECTION:
USE GLOVES TO PREVENT PROLONGED SKIN CONTACT. USE IMPERVIOUS GLOVES TO
PREVENT SKIN CONTACT AND ABSORPTION OF THIS MATERIAL THROUGH THE SKIN.
NITRILE OR NEOPRENE GLOVES MAY AFFORD ADEQUATE SKIN PROTECTION.
EYE PROTECTION:
USE SAFETY EYEWEAR DESIGNED TO PROTECT AGAINST SPLASH OF LIQUIDS.
OTHER PROTECTIVE EQUIPMENT:
REFER TO SAFETY SUPERVISOR OR INDUSTRIAL HYGIENIST FOR FURTHER GUIDANCE
REGARDING TYPES OF PERSONAL PROTECTIVE EQUIPMENT AND THEIR APPLICATIONS.
REFER TO SAFETY SUPERVISOR OR INDUSTRIAL HYGIENIST FOR FURTHER INFORMATION
REGARDING PERSONAL PROTECTIVE EQUIPMENT AND ITS APPLICATION.
HYGIENIC PRACTICES:
WASH THOROUGHLY WITH SOAP AND WATER BEFORE EATING, DRINKING OR SMOKING.
REMOVE CONTAMINATED CLOTHING IMMEDIATELY AND LAUNDER BEFORE REUSE.
| 9. PHYSICAL AND CHEMICAL PROPERTIES | |
APPEARANCE: LIQUID
PHYSICAL STATE: LIQUID
ODOR: SOLVENT LIKE
ODOR THRESHOLD: N.E.
RELATIVE DENSITY: 1.527
PH: N.A.
FREEZE POINT, DEG. C: N.D.
VISCOSITY: N.D.
SOLUBILITY IN WATER: SLIGHT
PARTITION COEFFICIENT, N-OCTANOL/WATER: N.D.
DECOMPOSTION TEMP., DEG. C: N.D.
BOILING RANGE, DEG. C: 100 - 285
EXPLOSIVE LIMITS, VOL%: 1.0 - 6.6
FLAMMABILITY: SUPPORTS COMBUSTION
FLASH POINT, DEG. C: 28
EVAPORATION RATE: SLOWER THAN ETHER
AUTO-IGNITION TEMP., DEG. C: N.D.
VAPOR DENSITY: HEAVIER THAN AIR
VAPOR PRESSURE: N.D.
(SEE "OTHER INFORMATION" SECTION FOR ABBREVIATION LEGEND)
| 10. STABILITY AND REACTIVITY | |
CONDITIONS TO AVOID:
AVOID TEMPERATURES ABOVE 120 DEG. F (49 DEG. C). AVOID CONTACT WITH STRONG
ACID AND STRONG BASES. AVOID ALL POSSIBLE SOURCES OF IGNITION.
INCOMPATIBILITY:
INCOMPATIBLE WITH STRONG OXIDIZING AGENTS, STRONG ACIDS AND STRONG
ALKALIES.
HAZARDOUS DECOMPOSITION:
BY OPEN FLAME, CARBON MONOXIDE AND CARBON DIOXIDE. WHEN HEATED TO
DECOMPOSITION, IT EMITS ACRID SMOKE AND IRRITATING FUMES. CONTAINS SOLVENTS
WHICH MAY FORM CARBON MONOXIDE, CARBON DIOXIDE, AND FORMALDEHYDE.
HAZARDOUS POLYMERIZATION: WILL NOT OCCUR UNDER NORMAL CONDITIONS.
STABILITY: THIS PRODUCT IS STABLE UNDER NORMAL STORAGE CONDITIONS.
| 11. TOXICOLOGICAL INFORMATION | |
EFFECTS OF OVEREXPOSURE - EYE CONTACT:
EXTREMELY IRRITATING TO THE EYES AND MAY CAUSE SEVERE DAMAGE, INCLUDING
BLINDNESS. CAUSES SERIOUS EYE IRRITATION
EFFECTS OF OVEREXPOSURE - SKIN CONTACT:
CONTACT CAUSES SEVERE SKIN IRRITATION AND POSSIBLE BURNS. MAY CAUSE
ALLERGIC SKIN REACTION. CAUSES SKIN IRRITATION. ALLERGIC REACTIONS ARE
POSSIBLE.
EFFECTS OF OVEREXPOSURE - INHALATION:
HARMFUL IF INHALED. HIGH GAS, VAPOR, MIST OR DUST CONCENTRATIONS MAY BE
HARMFUL IF INHALED. AVOID BREATHING FUMES, SPRAY, VAPORS, OR MIST.
MAY CAUSE HEADACHES AND DIZZINESS. HIGH VAPOR CONCENTRATIONS ARE IRRITATING
TO THE EYES, NOSE, THROAT AND LUNGS. PROLONGED OR EXCESSIVE INHALATION MAY
CAUSE RESPIRATORY TRACT IRRITATION. MAY CAUSE ALLERGIC RESPIRATORY
REACTION.
EFFECTS OF OVEREXPOSURE - INGESTION:
CORROSIVE AND MAY CAUSE SEVERE AND PERMANENT DAMAGE TO MOUTH, THROAT AND
STOMACH. HARMFUL IF SWALLOWED.
EFFECTS OF OVEREXPOSURE - CHRONIC HAZARDS:
HIGH CONCENTRATIONS MAY LEAD TO CENTRAL NERVOUS SYSTEM EFFECTS (DROWSINESS,
DIZZINESS, NAUSEA, HEADACHES, PARALYSIS, AND BLURRED VISION) AND/OR DAMAGE.
REPORTS HAVE ASSOCIATED REPEATED AND PROLONGED OCCUPATIONAL OVEREXPOSURE TO
SOLVENTS WITH PERMANENT BRAIN AND NERVOUS SYSTEM DAMAGE. OVEREXPOSURE TO
XYLENE IN LABORATORY ANIMALS HAS BEEN ASSOCIATED WITH LIVER ABNORMALITIES,
KIDNEY, LUNG, SPLEEN, EYE AND BLOOD DAMAGE AS WELL AS REPRODUCTIVE
DISORDERS. EFFECTS IN HUMANS, DUE TO CHRONIC OVEREXPOSURE, HAVE INCLUDED
LIVER, CARDIAC ABNORMALITIES AND NERVOUS SYSTEM DAMAGE. IARC LISTS
ETHYLBENZENE AS A POSSIBLE HUMAN CARCINOGEN (GROUP 2B).
PRIMARY ROUTE(S) OF ENTRY:
EYE CONTACT, INGESTION, INHALATION, SKIN ABSORPTION, SKIN CONTACT
ACUTE TOXICITY VALUES:
THE ACUTE EFFECTS OF THIS PRODUCT HAVE NOT BEEN TESTED. DATA ON INDIVIDUAL
COMPONENTS ARE TABULATED BELOW:
CAS-NO. CHEMICAL NAME ORAL LD50 DERMAL LD50 VAPOR LC50
1330-20-7 XYLENE 4300 MG/KG RAT N.I. 47635 MG/L RAT
(MIXED ISOMERS)
71-36-3 N-BUTANOL 790 MG/KG RAT 3400 MG/KG N.I.
RABBIT
100-41-4 ETHYLBENZENE 3500 MG/KG RAT 15354 MG/KG 17.2 MG/L RAT
RABBIT
84852-15-3 4-NONYLPHENOL, 580 MG/KG RAT 2031 MG/KG N.I.
BRANCHED RABBIT
112-24-3 TRIETHYLENETETR- 2500 MG/KG RAT 550 MG/KG N.I.
AMINE RABBIT
95-47-6 ORTHO-XYLENE 3609 MG/KG RAT N.I. N.I.
N.I. - NO INFORMATION
| 12. ECOLOGICAL INFORMATION | |
ECOLOGICAL INFORMATION: PRODUCT IS A MIXTURE OF LISTED COMPONENTS.
| 13. DISPOSAL INFORMATION | |
DISPOSAL INFORMATION:
DISPOSE OF MATERIAL IN ACCORDANCE TO LOCAL, STATE, AND FEDERAL REGULATIONS
AND ORDINANCES. DO NOT ALLOW TO ENTER WATERWAYS, WASTEWATER, SOIL, STORM
DRAINS OR SEWER SYSTEMS.
| 14. TRANSPORT INFORMATION | |
DOMESTIC INTERNATIONAL AIR (IATA) TDG (CANADA)
(USDOT) (IMDG)
UN NUMBER N.A. 1263 1263 N.A.
PROPER SHIPPING NAME PAINT PAINT PAINT PAINT
PRODUCTS IN PRODUCTS IN
LIMITED LIMITED
QUANTITIES QUANTITIES
HAZARD CLASS N.A. 3 3 N.A.
PACKING GROUP N.A. III III N.A.
LIMITED QUANTITY YES YES YES YES
| 15. REGULATORY INFORMATION | |
U.S. FEDERAL REGULATIONS:
CERCLA - SARA HAZARD CATEGORY:
THIS PRODUCT HAS BEEN REVIEWED ACCORDING TO THE EPA 'HAZARD CATEGORIES'
PROMULGATED UNDER SECTIONS 311 AND 312 OF THE SUPERFUND AMENDMENT AND
REAUTHORIZATION ACT OF 1986 (SARA TITLE III) AND IS CONSIDERED, UNDER
APPLICABLE DEFINITIONS, TO MEET THE FOLLOWING CATEGORIES:
FIRE HAZARD, ACUTE HEALTH HAZARD, CHRONIC HEALTH HAZARD
SARA SECTION 313:
THIS PRODUCT CONTAINS THE FOLLOWING SUBSTANCES SUBJECT TO THE REPORTING
REQUIREMENTS OF SECTION 313 OF TITLE III OF THE SUPERFUND AMENDMENT AND
REAUTHORIZATION ACT OF 1986 AND 40 CFR PART 372:
CHEMICAL NAME CAS-NO.
XYLENE (MIXED ISOMERS) 1330-20-7
N-BUTANOL 71-36-3
ETHYLBENZENE 100-41-4
ORTHO-XYLENE 95-47-6
TOXIC SUBSTANCES CONTROL ACT:
THIS PRODUCT CONTAINS THE FOLLOWING CHEMICAL SUBSTANCES SUBJECT TO THE
REPORTING REQUIREMENTS OF TSCA 12(B) IF EXPORTED FROM THE UNITED STATES:
NO TSCA 12(B) COMPONENTS EXIST IN THIS PRODUCT.
| 16. OTHER INFORMATION | |
HMIS RATINGS:
HEALTH 2*
FLAMMABILITY 3
PHYSICAL HAZARD 0
PERSONAL PROTECTION X
NFPA RATINGS:
HEALTH 2
FLAMMABILITY 3
INSTABILITY 0
VOLATILE ORGANIC COMPOUNDS, G/L: 263
SDS REVISION DATE: 7/21/2015
REASON FOR REVISION:
LEGEND:
N.A. - NOT APPLICABLE
N.E. - NOT ESTABLISHED
N.D. - NOT DETERMINED
RUST-OLEUM CORPORATION BELIEVES, TO THE BEST OF ITS KNOWLEDGE, INFORMATION
AND BELIEF, THE INFORMATION CONTAINED HEREIN TO BE ACCURATE AND RELIABLE AS
OF THE DATE OF THIS SAFETY DATA SHEET. HOWEVER, BECAUSE THE CONDITIONS OF
HANDLING, USE, AND STORAGE OF THESE MATERIALS ARE BEYOND OUR CONTROL, WE
ASSUME NO RESPONSIBILITY OR LIABILITY FOR PERSONAL INJURY OR PROPERTY
DAMAGE INCURRED BY THE USE OF THESE MATERIALS. RUST-OLEUM CORPORATION MAKES
NO WARRANTY, EXPRESSED OR IMPLIED, REGARDING THE ACCURACY OR RELIABILITY OF
THE DATA OR RESULTS OBTAINED FROM THEIR USE. ALL MATERIALS MAY PRESENT
UNKNOWN HAZARDS AND SHOULD BE USED WITH CAUTION. THE INFORMATION AND
RECOMMENDATIONS IN THIS MATERIAL SAFETY DATA SHEET ARE OFFERED FOR THE
USERS' CONSIDERATION AND EXAMINATION. IT IS THE RESPONSIBILITY OF THE USER
TO DETERMINE THE FINAL SUITABILITY OF THIS INFORMATION AND TO COMPLY WITH
ALL APPLICABLE INTERNATIONAL, FEDERAL, STATE, AND LOCAL LAWS AND
REGULATIONS.
DATE PRINTED: 7/22/2015
SAFETY DATA SHEET
RUST-OLEUM CORPORATION
TRUSTED QUALITY SINCE 1921
WWW.RUSTOLEUM.COM
| 1. IDENTIFICATION | |
PRODUCT NAME: SEM-EPOXY 1-GL 2PK PRO BASE DUNE TAN
PRODUCT IDENTIFIER: 238549
PRODUCT USE/CLASS: FLOOR COATING/ EPOXY BASE
REVISION DATE: 7/22/2015
SUPERCEDES DATE: NEW SDS
SUPPLIER:
RUST-OLEUM CORPORATION
11 HAWTHORN PARKWAY
VERNON HILLS, IL 60061
USA
MANUFACTURER:
RUST-OLEUM CORPORATION
11 HAWTHORN PARKWAY
VERNON HILLS, IL 60061
USA
PREPARER: REGULATORY DEPARTMENT
EMERGENCY TELEPHONE:
24 HOUR HOTLINE: 847-367-7700
| 2. HAZARD IDENTIFICATION | |
CLASSIFICATION:
SYMBOL(S) OF PRODUCT:
FLAME
EXCLAMATION MARK
SIGNAL WORD: WARNING
POSSIBLE HAZARDS:
72% OF THE MIXTURE CONSISTS OF INGREDIENT(S) OF UNKNOWN ACUTE TOXICITY.
GHS HAZARD STATEMENTS:
FLAMMABLE LIQUID, CATEGORY 3:
H226: FLAMMABLE LIQUID AND VAPOUR.
ACUTE TOXICITY, INHALATION, CATEGORY 4:
H332: HARMFUL IF INHALED.
GHS LABEL PRECAUTIONARY STATEMENTS:
P210:
KEEP AWAY FROM HEAT, HOT SURFACES, SPARKS, OPEN FLAMES AND OTHER IGNITION
SOURCES. NO SMOKING.
P261: AVOID BREATHING DUST, FUMES, GASES, MISTS, VAPORS, OR SPRAY.
P312: CALL A POISON CENTER OR DOCTOR/PHYSICIAN IF YOU FEEL UNWELL.
GHS SDS PRECAUTIONARY STATEMENTS:
P240: GROUND/BOND CONTAINER AND RECEIVING EQUIPMENT.
P241: USE EXPLOSION-PROOF ELECTRICAL/VENTILATING/LIGHTING/EQUIPMENT.
P242: USE ONLY NON-SPARKING TOOLS.
P243: TAKE PRECAUTIONARY MEASURES AGAINST STATIC DISCHARGE.
| 3. COMPOSITION/INFORMATION ON INGREDIENTS | |
HAZARDOUS SUBSTANCES:
CHEMICAL NAME CAS-NO. WT.% GHS SYMBOLS GHS STATEMENTS
RANGE
BISPHENOL A EPOXY 25085-99-8 25-50 NO INFORMATION NO INFORMATION
RESIN
HYDROUS MAGNESIUM 14807-96-6 10-25 NO INFORMATION NO INFORMATION
SILICATE
TITANIUM DIOXIDE 13463-67-7 10-25 NO INFORMATION NO INFORMATION
XYLENE 1330-20-7 2.5-10 GHS02-GHS07 H226-312-315-332
(MIXED ISOMERS)
METHYL ISOBUTYL 108-10-1 2.5-10 GHS02-GHS06 H225-319-331-335
KETONE
LIMESTONE 1317-65-3 2.5-10 NO INFORMATION NO INFORMATION
ETHYLBENZENE 100-41-4 2.5-10 GHS02-GHS07 H225-332
ORTHO-XYLENE 95-47-6 0.1-1.0 GHS02-GHS06 H226-312-315-331
AMORPHOUS SILICA 7631-86-9 0.1-1.0 GHS06 H331
TOLUENE 108-88-3 0.1-1.0 GHS02-GHS07- H225-302-304-
GHS08 315-332-336-373
| 4. FIRST-AID MEASURES | |
FIRST AID - EYE CONTACT:
IMMEDIATELY FLUSH EYES WITH PLENTY OF WATER FOR AT LEAST 15 MINUTES HOLDING
EYELIDS OPEN. GET MEDICAL ATTENTION. DO NOT ALLOW RUBBING OF EYES OR
KEEPING EYES CLOSED.
FIRST AID - SKIN CONTACT:
WASH SKIN WITH SOAP AND WATER. REMOVE CONTAMINATED CLOTHING. GET MEDICAL
ATTENTION IF IRRITATION DEVELOPS OR PERSISTS.
FIRST AID - INHALATION:
REMOVE TO FRESH AIR. IF NOT BREATHING, GIVE ARTIFICIAL RESPIRATION.
IF BREATHING IS DIFFICULT, GIVE OXYGEN. GET IMMEDIATE MEDICAL ATTENTION.
DO NOT USE MOUTH-TO-MOUTH RESUSCITATION. IF YOU EXPERIENCE DIFFICULTY IN
BREATHING, LEAVE THE AREA TO OBTAIN FRESH AIR. IF CONTINUED DIFFICULTY IS
EXPERIENCED, GET MEDICAL ASSISTANCE IMMEDIATELY.
FIRST AID - INGESTION:
IF SWALLOWED, DO NOT INDUCE VOMITING. IF VICTIM IS CONSCIOUS AND ALERT,
GIVE 2 TO 4 CUPFULS OF WATER OR MILK. CALL A PHYSICIAN OR POISON CONTROL
CENTER IMMEDIATELY. NEVER GIVE ANYTHING BY MOUTH TO AN UNCONSCIOUS PERSON.
TREAT SYMPTOMATICALLY AND SUPPORTIVELY. ASPIRATION HAZARD: DO NOT INDUCE
VOMITING OR GIVE ANYTHING BY MOUTH BECAUSE THIS MATERIAL CAN ENTER THE
LUNGS AND CAUSE SEVERE LUNG DAMAGE. GET IMMEDIATE MEDICAL ATTENTION.
IF SWALLOWED, GET MEDICAL ATTENTION.
| 5. FIRE-FIGHTING MEASURES | |
EXTINGUISHING MEDIA:
ALCOHOL FILM FORMING FOAM, CARBON DIOXIDE, DRY CHEMICAL, DRY SAND, WATER
FOG
UNUSUAL FIRE AND EXPLOSION HAZARDS:
CLOSED CONTAINERS MAY EXPLODE WHEN EXPOSED TO EXTREME HEAT DUE TO BUILDUP
OF STEAM. VAPORS MAY FORM EXPLOSIVE MIXTURES WITH AIR. VAPORS CAN TRAVEL TO
A SOURCE OF IGNITION AND FLASH BACK. KEEP CONTAINERS TIGHTLY CLOSED.
ISOLATE FROM HEAT, ELECTRICAL EQUIPMENT, SPARKS AND OPEN FLAME. NO UNUSUAL
FIRE OR EXPLOSION HAZARDS NOTED.
SPECIAL FIREFIGHTING PROCEDURES:
WATER MAY BE USED TO COOL CLOSED CONTAINERS TO PREVENT PRESSURE BUILDUP AND
POSSIBLE AUTOIGNITION OR EXPLOSION. EVACUATE AREA AND FIGHT FIRE FROM A
SAFE DISTANCE. USE WATER SPRAY TO KEEP FIRE-EXPOSED CONTAINERS COOL.
CONTAINERS MAY EXPLODE WHEN HEATED.
| 6. ACCIDENTAL RELEASE MEASURES | |
STEPS TO BE TAKEN IF MATERIAL IS RELEASED OR SPILLED:
CONTAIN SPILLED LIQUID WITH SAND OR EARTH. DO NOT USE COMBUSTIBLE MATERIALS
SUCH AS SAWDUST. ELIMINATE ALL IGNITION SOURCES; USE EXPLOSION-PROOF
EQUIPMENT. PLACE MATERIAL IN A CONTAINER AND DISPOSE OF ACCORDING TO LOCAL,
PROVINCIAL, STATE AND FEDERAL REGULATIONS. REMOVE ALL SOURCES OF IGNITION,
VENTILATE AREA AND REMOVE WITH INERT ABSORBENT AND NON-SPARKING TOOLS.
DISPOSE OF ACCORDING TO LOCAL, STATE (PROVINCIAL) AND FEDERAL REGULATIONS.
DO NOT INCINERATE CLOSED CONTAINERS. VENTILATE AREA, ISOLATE SPILLED
MATERIAL, AND REMOVE WITH INERT ABSORBENT. DISPOSE OF CONTAMINATED
ABSORBENT, CONTAINER, AND UNUSED CONTENTS IN ACCORDANCE WITH LOCAL, STATE,
AND FEDERAL REGULATIONS.
| 7. HANDLING AND STORAGE | |
HANDLING:
WASH THOROUGHLY AFTER HANDLING. WASH HANDS BEFORE EATING. REMOVE
CONTAMINATED CLOTHING AND LAUNDER BEFORE REUSE. USE ONLY IN A
WELL-VENTILATED AREA. USE ONLY WITH ADEQUATE VENTILATION. FOLLOW ALL
MSDS/LABEL PRECAUTIONS EVEN AFTER CONTAINER IS EMPTIED BECAUSE IT MAY
RETAIN PRODUCT RESIDUES. AVOID BREATHING FUMES, VAPORS, OR MIST. AVOID
PROLONGED OR REPEATED CONTACT WITH SKIN. AVOID CONTACT WITH EYES, SKIN AND
CLOTHING.
STORAGE:
STORE IN A DRY, WELL VENTILATED PLACE. KEEP CONTAINER TIGHTLY CLOSED WHEN
NOT IN USE. KEEP CONTAINERS TIGHTLY CLOSED. ISOLATE FROM HEAT, ELECTRICAL
EQUIPMENT, SPARKS AND OPEN FLAME. DO NOT STORE ABOVE 120 DEG. F. STORE
LARGE QUANTITIES IN BUILDINGS DESIGNED AND PROTECTED FOR STORAGE OF NFPA
CLASS II COMBUSTIBLE LIQUIDS. KEEP AWAY FROM HEAT, SPARKS, FLAME AND
SOURCES OF IGNITION. KEEP CONTAINER CLOSED WHEN NOT IN USE. AVOID EXCESS
HEAT. PRODUCT SHOULD BE STORED IN TIGHTLY SEALED CONTAINERS AND PROTECTED
FROM HEAT, MOISTURE, AND FOREIGN MATERIALS.
| 8. EXPOSURE CONTROLS/PERSONAL PROTECTION | |
CHEMICAL NAME CAS-NO. WEIGHT % LESS THAN
BISPHENOL A EPOXY RESIN 25085-99-8 40.0
HYDROUS MAGNESIUM SILICATE 14807-96-6 20.0
TITANIUM DIOXIDE 13463-67-7 20.0
XYLENE (MIXED ISOMERS) 1330-20-7 10.0
METHYL ISOBUTYL KETONE 108-10-1 5.0
LIMESTONE 1317-65-3 5.0
ETHYLBENZENE 100-41-4 5.0
ORTHO-XYLENE 95-47-6 1.0
AMORPHOUS SILICA 7631-86-9 1.0
TOLUENE 108-88-3 1.0
CHEMICAL NAME ACGIH ACGIH OSHA OSHA
TLV-TWA TLV-STEL PEL-TWA PEL-CEILING
BISPHENOL A EPOXY RESIN N.E. N.E. N.E. N.E.
HYDROUS MAGNESIUM SILICATE 2 MG/M3 N.E. N.E. N.E.
TITANIUM DIOXIDE 10 MG/M3 N.E. 15 MG/M3 N.E.
XYLENE (MIXED ISOMERS) 100 PPM 150 PPM 100 PPM N.E.
METHYL ISOBUTYL KETONE 20 PPM 75 PPM 100 PPM N.E.
LIMESTONE N.E. N.E. 15 MG/M3 N.E.
ETHYLBENZENE 20 PPM N.E. 100 PPM N.E.
ORTHO-XYLENE 100 PPM 150 PPM N.E. N.E.
AMORPHOUS SILICA N.E. N.E. N.E. N.E.
TOLUENE 20 PPM N.E. 200 PPM 300 PPM
PERSONAL PROTECTION:
ENGINEERING CONTROLS:
USE PROCESS ENCLOSURES, LOCAL EXHAUST VENTILATION, OR OTHER ENGINEERING
CONTROLS TO CONTROL AIRBORNE LEVELS BELOW RECOMMENDED EXPOSURE LIMITS.
PREVENT BUILD-UP OF VAPORS BY OPENING ALL DOORS AND WINDOWS TO ACHIEVE
CROSS-VENTILATION.
RESPIRATORY PROTECTION:
A RESPIRATORY PROTECTION PROGRAM THAT MEETS OSHA 1910.134 AND ANSI Z88.2
REQUIREMENTS MUST BE FOLLOWED WHENEVER WORKPLACE CONDITIONS WARRANT A
RESPIRATOR'S USE. A NIOSH/MSHA APPROVED AIR PURIFYING RESPIRATOR WITH AN
ORGANIC VAPOR CARTRIDGE OR CANISTER MAY BE PERMISSIBLE UNDER CERTAIN
CIRCUMSTANCES WHERE AIRBORNE CONCENTRATIONS ARE EXPECTED TO EXCEED EXPOSURE
LIMITS.
PROTECTION PROVIDED BY AIR PURIFYING RESPIRATORS IS LIMITED. USE A POSITIVE
PRESSURE AIR SUPPLIED RESPIRATOR IF THERE IS ANY POTENTIAL FOR AN
UNCONTROLLED RELEASE, EXPOSURE LEVELS ARE NOT KNOWN, OR IN ANY OTHER
CIRCUMSTANCES WHERE AIR PURIFYING RESPIRATORS MAY NOT PROVIDE ADEQUATE
PROTECTION.
SKIN PROTECTION:
USE GLOVES TO PREVENT PROLONGED SKIN CONTACT. USE IMPERVIOUS GLOVES TO
PREVENT SKIN CONTACT AND ABSORPTION OF THIS MATERIAL THROUGH THE SKIN.
NITRILE OR NEOPRENE GLOVES MAY AFFORD ADEQUATE SKIN PROTECTION.
EYE PROTECTION:
USE SAFETY EYEWEAR DESIGNED TO PROTECT AGAINST SPLASH OF LIQUIDS.
OTHER PROTECTIVE EQUIPMENT:
REFER TO SAFETY SUPERVISOR OR INDUSTRIAL HYGIENIST FOR FURTHER GUIDANCE
REGARDING TYPES OF PERSONAL PROTECTIVE EQUIPMENT AND THEIR APPLICATIONS.
REFER TO SAFETY SUPERVISOR OR INDUSTRIAL HYGIENIST FOR FURTHER INFORMATION
REGARDING PERSONAL PROTECTIVE EQUIPMENT AND ITS APPLICATION.
HYGIENIC PRACTICES:
WASH THOROUGHLY WITH SOAP AND WATER BEFORE EATING, DRINKING OR SMOKING.
REMOVE CONTAMINATED CLOTHING IMMEDIATELY AND LAUNDER BEFORE REUSE.
| 9. PHYSICAL AND CHEMICAL PROPERTIES | |
APPEARANCE: LIQUID
PHYSICAL STATE: LIQUID
ODOR: SOLVENT LIKE
ODOR THRESHOLD: N.E.
RELATIVE DENSITY: 1.449
PH: N.D.
FREEZE POINT, DEG. C: N.D.
VISCOSITY: N.D.
SOLUBILITY IN WATER: SLIGHT
PARTITION COEFFICIENT, N-OCTANOL/WATER: N.D.
DECOMPOSTION TEMP., DEG. C: N.D.
BOILING RANGE, DEG. C: -18 - 261
EXPLOSIVE LIMITS, VOL%: 1.0 - 8.0
FLAMMABILITY: SUPPORTS COMBUSTION
FLASH POINT, DEG. C: 28
EVAPORATION RATE: SLOWER THAN ETHER
AUTO-IGNITION TEMP., DEG. C: N.D.
VAPOR DENSITY: HEAVIER THAN AIR
VAPOR PRESSURE: N.D.
(SEE "OTHER INFORMATION" SECTION FOR ABBREVIATION LEGEND)
| 10. STABILITY AND REACTIVITY | |
CONDITIONS TO AVOID:
AVOID TEMPERATURES ABOVE 120 DEG. F (49 DEG. C). AVOID CONTACT WITH STRONG
ACID AND STRONG BASES. AVOID ALL POSSIBLE SOURCES OF IGNITION.
INCOMPATIBILITY:
INCOMPATIBLE WITH STRONG OXIDIZING AGENTS, STRONG ACIDS AND STRONG
ALKALIES.
HAZARDOUS DECOMPOSITION:
BY OPEN FLAME, CARBON MONOXIDE AND CARBON DIOXIDE. WHEN HEATED TO
DECOMPOSITION, IT EMITS ACRID SMOKE AND IRRITATING FUMES. CONTAINS SOLVENTS
WHICH MAY FORM CARBON MONOXIDE, CARBON DIOXIDE, AND FORMALDEHYDE.
HAZARDOUS POLYMERIZATION: WILL NOT OCCUR UNDER NORMAL CONDITIONS.
STABILITY:
THIS PRODUCT IS STABLE UNDER NORMAL STORAGE CONDITIONS. MAY FORM PEROXIDES
OF UNKOWN STABILITY.
| 11. TOXICOLOGICAL INFORMATION | |
EFFECTS OF OVEREXPOSURE - EYE CONTACT: CAUSES SERIOUS EYE IRRITATION
EFFECTS OF OVEREXPOSURE - SKIN CONTACT:
PROLONGED OR REPEATED SKIN CONTACT MAY CAUSE IRRITATION. MAY BE ABSORBED
THROUGH THE SKIN IN HARMFUL AMOUNTS. CAUSES SKIN IRRITATION. ALLERGIC
REACTIONS ARE POSSIBLE. MAY CAUSE SKIN SENSITIZATION, AN ALLERGIC REACTION,
WHICH BECOMES EVIDENT UPON RE-EXPOSURE TO THIS MATERIAL.
EFFECTS OF OVEREXPOSURE - INHALATION:
HARMFUL IF INHALED. HIGH GAS, VAPOR, MIST OR DUST CONCENTRATIONS MAY BE
HARMFUL IF INHALED. AVOID BREATHING FUMES, SPRAY, VAPORS, OR MIST. MAY
CAUSE HEADACHES AND DIZZINESS. HIGH VAPOR CONCENTRATIONS ARE IRRITATING TO
THE EYES, NOSE, THROAT AND LUNGS. PROLONGED OR EXCESSIVE INHALATION MAY
CAUSE RESPIRATORY TRACT IRRITATION.
EFFECTS OF OVEREXPOSURE - INGESTION:
HARMFUL IF SWALLOWED. ASPIRATION HAZARD IF SWALLOWED; CAN ENTER LUNGS AND
CAUSE DAMAGE.
EFFECTS OF OVEREXPOSURE - CHRONIC HAZARDS:
HIGH CONCENTRATIONS MAY LEAD TO CENTRAL NERVOUS SYSTEM EFFECTS (DROWSINESS,
DIZZINESS, NAUSEA, HEADACHES, PARALYSIS, AND BLURRED VISION) AND/OR DAMAGE.
REPORTS HAVE ASSOCIATED REPEATED AND PROLONGED OCCUPATIONAL OVEREXPOSURE TO
SOLVENTS WITH PERMANENT BRAIN AND NERVOUS SYSTEM DAMAGE. OVEREXPOSURE TO
XYLENE IN LABORATORY ANIMALS HAS BEEN ASSOCIATED WITH LIVER ABNORMALITIES,
KIDNEY, LUNG, SPLEEN, EYE AND BLOOD DAMAGE AS WELL AS REPRODUCTIVE
DISORDERS. EFFECTS IN HUMANS, DUE TO CHRONIC OVEREXPOSURE, HAVE INCLUDED
LIVER, CARDIAC ABNORMALITIES AND NERVOUS SYSTEM DAMAGE. IARC LISTS
ETHYLBENZENE AS A POSSIBLE HUMAN CARCINOGEN (GROUP 2B). CONTAINS TITANIUM
DIOXIDE. TITANIUM DIOXIDE IS LISTED AS A GROUP 2B-"POSSIBLY CARCINOGENIC TO
HUMANS" BY IARC. NO SIGNIFICANT EXPOSURE TO TITANIUM DIOXIDE IS THOUGHT TO
OCCUR DURING THE USE OF PRODUCTS IN WHICH TITANIUM DIOXIDE IS BOUND TO
OTHER MATERIALS, SUCH AS IN PAINTS DURING BRUSH APPLICATION OR DRYING.
RISK OF OVEREXPOSURE DEPENDS ON DURATION AND LEVEL OF EXPOSURE TO DUST FROM
REPEATED SANDING OF SURFACES OR SPRAY MIST AND THE ACTUAL CONCENTRATION OF
TITANIUM DIOXIDE IN THE FORMULA. (REF: IARC MONOGRAPH, VOL. 93, 2010)
PRIMARY ROUTE(S) OF ENTRY:
EYE CONTACT, INGESTION, INHALATION, SKIN ABSORPTION, SKIN CONTACT
ACUTE TOXICITY VALUES:
THE ACUTE EFFECTS OF THIS PRODUCT HAVE NOT BEEN TESTED. DATA ON INDIVIDUAL
COMPONENTS ARE TABULATED BELOW:
CAS-NO. CHEMICAL NAME ORAL LD50 DERMAL LD50 VAPOR LC50
13463-67-7 TITANIUM DIOXIDE >10000 MG/KG N.I. N.I.
RAT
1330-20-7 XYLENE 4300 MG/KG RAT N.I. 47635 MG/L
(MIXED ISOMERS) RAT
108-10-1 METHYL ISOBUTYL 2080 MG/KG RAT >16000 MG/KG 8.2 MG/L RAT
KETONE RABBIT
100-41-4 ETHYLBENZENE 3500 MG/KG RAT 15354 MG/KG 17.2 MG/L RAT
RABBIT
95-47-6 ORTHO-XYLENE 3609 MG/KG RAT N.I. N.I.
7631-86-9 AMORPHOUS SILICA >5000 MG/KG RAT >2000 MG/KG >2.2 MG/L RAT
RABBIT
108-88-3 TOLUENE 636 MG/KG RAT 8390 MG/KG 12.5 MG/L RAT
RABBIT
N.I. - NO INFORMATION
| 12. ECOLOGICAL INFORMATION | |
ECOLOGICAL INFORMATION:
PRODUCT IS A MIXTURE OF LISTED COMPONENTS. PRODUCT IS A MIXTURE OF LISTED
COMPONENTS.
| 13. DISPOSAL INFORMATION | |
DISPOSAL INFORMATION:
DISPOSE OF MATERIAL IN ACCORDANCE TO LOCAL, STATE, AND FEDERAL REGULATIONS
AND ORDINANCES. DO NOT ALLOW TO ENTER WATERWAYS, WASTEWATER, SOIL, STORM
DRAINS OR SEWER SYSTEMS.
| 14. TRANSPORT INFORMATION | |
DOMESTIC INTERNATIONAL AIR (IATA) TDG (CANADA)
(USDOT) (IMDG)
UN NUMBER N.A. 1263 1263 N.A.
PROPER SHIPPING NAME PAINT PAINT PAINT PAINT
PRODUCTS IN PRODUCTS IN
LIMITED LIMITED
QUANTITIES QUANTITIES
HAZARD CLASS N.A. 3 3 N.A.
PACKING GROUP N.A. III III N.A.
LIMITED QUANTITY YES YES YES YES
| 15. REGULATORY INFORMATION | |
U.S. FEDERAL REGULATIONS:
CERCLA - SARA HAZARD CATEGORY:
THIS PRODUCT HAS BEEN REVIEWED ACCORDING TO THE EPA 'HAZARD CATEGORIES'
PROMULGATED UNDER SECTIONS 311 AND 312 OF THE SUPERFUND AMENDMENT AND
REAUTHORIZATION ACT OF 1986 (SARA TITLE III) AND IS CONSIDERED, UNDER
APPLICABLE DEFINITIONS, TO MEET THE FOLLOWING CATEGORIES:
FIRE HAZARD, ACUTE HEALTH HAZARD
SARA SECTION 313:
THIS PRODUCT CONTAINS THE FOLLOWING SUBSTANCES SUBJECT TO THE REPORTING
REQUIREMENTS OF SECTION 313 OF TITLE III OF THE SUPERFUND AMENDMENT AND
REAUTHORIZATION ACT OF 1986 AND 40 CFR PART 372:
CHEMICAL NAME CAS-NO.
XYLENE (MIXED ISOMERS) 1330-20-7
METHYL ISOBUTYL KETONE 108-10-1
ETHYLBENZENE 100-41-4
ORTHO-XYLENE 95-47-6
TOLUENE 108-88-3
TOXIC SUBSTANCES CONTROL ACT:
THIS PRODUCT CONTAINS THE FOLLOWING CHEMICAL SUBSTANCES SUBJECT TO THE
REPORTING REQUIREMENTS OF TSCA 12(B) IF EXPORTED FROM THE UNITED STATES:
NO TSCA 12(B) COMPONENTS EXIST IN THIS PRODUCT.
| 16. OTHER INFORMATION | |
HMIS RATINGS:
HEALTH 2*
FLAMMABILITY 3
PHYSICAL HAZARD 0
PERSONAL PROTECTION X
NFPA RATINGS:
HEALTH 2
FLAMMABILITY 3
INSTABILITY 0
VOLATILE ORGANIC COMPOUNDS, G/L: 235
SDS REVISION DATE: 7/22/2015
REASON FOR REVISION:
LEGEND:
N.A. - NOT APPLICABLE
N.E. - NOT ESTABLISHED
N.D. - NOT DETERMINED
RUST-OLEUM CORPORATION BELIEVES, TO THE BEST OF ITS KNOWLEDGE, INFORMATION
AND BELIEF, THE INFORMATION CONTAINED HEREIN TO BE ACCURATE AND RELIABLE AS
OF THE DATE OF THIS SAFETY DATA SHEET. HOWEVER, BECAUSE THE CONDITIONS OF
HANDLING, USE, AND STORAGE OF THESE MATERIALS ARE BEYOND OUR CONTROL, WE
ASSUME NO RESPONSIBILITY OR LIABILITY FOR PERSONAL INJURY OR PROPERTY
DAMAGE INCURRED BY THE USE OF THESE MATERIALS. RUST-OLEUM CORPORATION MAKES
NO WARRANTY, EXPRESSED OR IMPLIED, REGARDING THE ACCURACY OR RELIABILITY OF
THE DATA OR RESULTS OBTAINED FROM THEIR USE. ALL MATERIALS MAY PRESENT
UNKNOWN HAZARDS AND SHOULD BE USED WITH CAUTION. THE INFORMATION AND
RECOMMENDATIONS IN THIS MATERIAL SAFETY DATA SHEET ARE OFFERED FOR THE
USERS' CONSIDERATION AND EXAMINATION. IT IS THE RESPONSIBILITY OF THE USER
TO DETERMINE THE FINAL SUITABILITY OF THIS INFORMATION AND TO COMPLY WITH
ALL APPLICABLE INTERNATIONAL, FEDERAL, STATE, AND LOCAL LAWS AND
REGULATIONS.
DATE PRINTED: 7/22/2015
SAFETY DATA SHEET
RUST-OLEUM CORPORATION
TRUSTED QUALITY SINCE 1921
WWW.RUSTOLEUM.COM
| 1. IDENTIFICATION | |
PRODUCT NAME: MISC. EPOXY SHIELD TAN CHIPS
PRODUCT IDENTIFIER: 210542
PRODUCT USE/CLASS: PAINT CHIPS
REVISION DATE: 7/22/2015
SUPERCEDES DATE: NEW SDS
SUPPLIER:
RUST-OLEUM CORPORATION
11 HAWTHORN PARKWAY
VERNON HILLS, IL 60061
USA
MANUFACTURER:
RUST-OLEUM CORPORATION
11 HAWTHORN PARKWAY
VERNON HILLS, IL 60061
USA
PREPARER: REGULATORY DEPARTMENT
EMERGENCY TELEPHONE:
24 HOUR HOTLINE: 847-367-7700
| 2. HAZARD IDENTIFICATION | |
CLASSIFICATION:
SYMBOL(S) OF PRODUCT: NOT A HAZARDOUS SUBSTANCE OR MIXTURE.
SIGNAL WORD: NO SIGNAL WORD HAS BEEN ASSIGNED.
| 3. COMPOSITION/INFORMATION ON INGREDIENTS | |
HAZARDOUS SUBSTANCES:
CHEMICAL NAME CAS-NO. WT.% GHS SYMBOLS GHS STATEMENTS
RANGE
BARIUM SULFATE 7727-43-7 50-75 NO INFORMATION NO INFORMATION
POLYVINYL ACETATE PROPRIETARY 10-25 NO INFORMATION NO INFORMATION
RESIN
HYDROUS MAGNESIUM 14807-96-6 2.5-10 NO INFORMATION NO INFORMATION
SILICATE
TITANIUM DIOXIDE 13463-67-7 2.5-10 NO INFORMATION NO INFORMATION
AMORPHOUS SILICA 7631-86-9 0.1-1.0 GHS06 H331
| 4. FIRST-AID MEASURES | |
FIRST AID - EYE CONTACT:
IMMEDIATELY FLUSH EYES WITH PLENTY OF WATER FOR AT LEAST 15 MINUTES HOLDING
EYELIDS OPEN. GET MEDICAL ATTENTION. DO NOT ALLOW RUBBING OF EYES OR
KEEPING EYES CLOSED.
FIRST AID - SKIN CONTACT:
WASH SKIN WITH SOAP AND WATER. REMOVE CONTAMINATED CLOTHING. GET MEDICAL
ATTENTION IF IRRITATION DEVELOPS OR PERSISTS.
FIRST AID - INHALATION:
REMOVE TO FRESH AIR. IF NOT BREATHING, GIVE ARTIFICIAL RESPIRATION.
IF BREATHING IS DIFFICULT, GIVE OXYGEN. GET IMMEDIATE MEDICAL ATTENTION.
DO NOT USE MOUTH-TO-MOUTH RESUSCITATION. IF YOU EXPERIENCE DIFFICULTY IN
BREATHING, LEAVE THE AREA TO OBTAIN FRESH AIR. IF CONTINUED DIFFICULTY IS
EXPERIENCED, GET MEDICAL ASSISTANCE IMMEDIATELY.
FIRST AID - INGESTION:
IF SWALLOWED, RINSE MOUTH WITH WATER. IF FEELING UNWELL, GET MEDICAL
ATTENTION. SWALLOWING LESS THAN AN OUNCE WILL NOT CAUSE SIGNIFICANT HARM.
FOR LARGER AMOUNTS, DO NOT INDUCE VOMITING, BUT GIVE ONE OR TWO GLASSES OF
WATER TO DRINK AND GET MEDICAL ATTENTION.
| 5. FIRE-FIGHTING MEASURES | |
EXTINGUISHING MEDIA:
ALCOHOL FILM FORMING FOAM, CARBON DIOXIDE, DRY CHEMICAL, DRY SAND, WATER
FOG
UNUSUAL FIRE AND EXPLOSION HAZARDS:
KEEP CONTAINERS TIGHTLY CLOSED. FLASH POINT IS TESTED TO BE GREATER THAN
200 DEGREES F. NO UNUSUAL FIRE OR EXPLOSION HAZARDS NOTED.
SPECIAL FIREFIGHTING PROCEDURES:
WATER MAY BE USED TO COOL CLOSED CONTAINERS TO PREVENT BUILDUP OF STEAM.
IF WATER IS USED, FOG NOZZLES ARE PREFERRED.
| 6. ACCIDENTAL RELEASE MEASURES | |
STEPS TO BE TAKEN IF MATERIAL IS RELEASED OR SPILLED:
DISPOSE OF ACCORDING TO LOCAL, STATE (PROVINCIAL) AND FEDERAL REGULATIONS.
DO NOT INCINERATE CLOSED CONTAINERS. SWEEP UP GENTLY TO AVOID DUST CLOUD
FORMATION.
| 7. HANDLING AND STORAGE | |
HANDLING:
WASH THOROUGHLY AFTER HANDLING. WASH HANDS BEFORE EATING. REMOVE
CONTAMINATED CLOTHING AND LAUNDER BEFORE REUSE. USE ONLY WITH ADEQUATE
VENTILATION. FOLLOW ALL MSDS/LABEL PRECAUTIONS EVEN AFTER CONTAINER IS
EMPTIED BECAUSE IT MAY RETAIN PRODUCT RESIDUES. AVOID BREATHING FUMES,
VAPORS, OR MIST. AVOID CONTACT WITH EYES, SKIN AND CLOTHING.
STORAGE:
STORE IN A DRY, WELL VENTILATED PLACE. KEEP CONTAINER TIGHTLY CLOSED WHEN
NOT IN USE. KEEP CONTAINER CLOSED WHEN NOT IN USE.
| 8. EXPOSURE CONTROLS/PERSONAL PROTECTION | |
CHEMICAL NAME CAS-NO. WEIGHT % LESS THAN
BARIUM SULFATE 7727-43-7 75.0
POLYVINYL ACETATE RESIN PROPRIETARY 20.0
HYDROUS MAGNESIUM SILICATE 14807-96-6 5.0
TITANIUM DIOXIDE 13463-67-7 5.0
AMORPHOUS SILICA 7631-86-9 1.0
CHEMICAL NAME ACGIH ACGIH OSHA OSHA
TLV-TWA TLV-STEL PEL-TWA PEL-CEILING
BARIUM SULFATE 5 MG/M3 N.E. 15 MG/M3 N.E.
POLYVINYL ACETATE RESIN N.E. N.E. N.E. N.E.
HYDROUS MAGNESIUM SILICATE 2 MG/M3 N.E. N.E. N.E.
TITANIUM DIOXIDE 10 MG/M3 N.E. 15 MG/M3 N.E.
AMORPHOUS SILICA N.E. N.E. N.E. N.E.
PERSONAL PROTECTION:
ENGINEERING CONTROLS:
USE PROCESS ENCLOSURES, LOCAL EXHAUST VENTILATION, OR OTHER ENGINEERING
CONTROLS TO CONTROL AIRBORNE LEVELS BELOW RECOMMENDED EXPOSURE LIMITS.
PROVIDE GENERAL DILUTION OF LOCAL EXHAUST VENTILATION IN VOLUME AND PATTERN
TO KEEP TLV OF HAZARDOUS INGREDIENTS BELOW ACCEPTABLE LIMITS. PREVENT
BUILD-UP OF VAPORS BY OPENING ALL DOORS AND WINDOWS TO ACHIEVE
CROSS-VENTILATION.
RESPIRATORY PROTECTION:
A RESPIRATORY PROTECTION PROGRAM THAT MEETS OSHA 1910.134 AND ANSI Z88.2
REQUIREMENTS MUST BE FOLLOWED WHENEVER WORKPLACE CONDITIONS WARRANT A
RESPIRATOR'S USE.
SKIN PROTECTION:
USE GLOVES TO PREVENT PROLONGED SKIN CONTACT. NITRILE OR NEOPRENE GLOVES
MAY AFFORD ADEQUATE SKIN PROTECTION.
EYE PROTECTION:
USE SAFETY EYEWEAR DESIGNED TO PROTECT AGAINST SPLASH OF LIQUIDS. WEAR
SAFETY GLASSES WITH SIDE SHIELDS (OR GOGGLES) AND A FACE SHIELD.
OTHER PROTECTIVE EQUIPMENT:
REFER TO SAFETY SUPERVISOR OR INDUSTRIAL HYGIENIST FOR FURTHER GUIDANCE
REGARDING TYPES OF PERSONAL PROTECTIVE EQUIPMENT AND THEIR APPLICATIONS.
REFER TO SAFETY SUPERVISOR OR INDUSTRIAL HYGIENIST FOR FURTHER INFORMATION
REGARDING PERSONAL PROTECTIVE EQUIPMENT AND ITS APPLICATION.
HYGIENIC PRACTICES:
WASH THOROUGHLY WITH SOAP AND WATER BEFORE EATING, DRINKING OR SMOKING.
REMOVE CONTAMINATED CLOTHING IMMEDIATELY AND LAUNDER BEFORE REUSE.
| 9. PHYSICAL AND CHEMICAL PROPERTIES | |
APPEARANCE: PARTICULATE SOLID
PHYSICAL STATE: SOLID
ODOR: SOLVENT LIKE
ODOR THRESHOLD: N.E.
RELATIVE DENSITY: 2.834
PH: N.A.
FREEZE POINT, DEG. C: N.D.
VISCOSITY: N.D.
SOLUBILITY IN WATER: NONE
PARTITION COEFFICIENT, N-OCTANOL/WATER: N.D.
DECOMPOSTION TEMP., DEG. C: N.D.
BOILING RANGE, DEG. C: 999 - -18
EXPLOSIVE LIMITS, VOL%: 99.9 - 99.9
FLAMMABILITY: DOES NOT SUPPORT COMBUSTION
FLASH POINT, DEG. C: 94
EVAPORATION RATE: SLOWER THAN ETHER
AUTO-IGNITION TEMP., DEG. C: N.D.
VAPOR DENSITY: HEAVIER THAN AIR
VAPOR PRESSURE: N.D.
(SEE "OTHER INFORMATION" SECTION FOR ABBREVIATION LEGEND)
| 10. STABILITY AND REACTIVITY | |
CONDITIONS TO AVOID: AVOID CONTACT WITH STRONG ACID AND STRONG BASES.
INCOMPATIBILITY:
INCOMPATIBLE WITH STRONG OXIDIZING AGENTS, STRONG ACIDS AND STRONG
ALKALIES. NOT APPLICABLE FOR THIS PRODUCT.
HAZARDOUS DECOMPOSITION:
WHEN HEATED TO DECOMPOSITION, IT EMITS ACRID SMOKE AND IRRITATING FUMES.
MAY PRODUCE HAZARDOUS FUMES WHEN HEATED TO DECOMPOSITION AS IN WELDING.
FUMES MAY CONTAIN:
CARBON MONOXIDE, CARBON DIOXIDE, CHLORINE, HYDROGEN CHLORIDE, CYANIDE, AND
METHYLENE DIPHENYL DIISOCYANATE.
HAZARDOUS POLYMERIZATION: WILL NOT OCCUR UNDER NORMAL CONDITIONS.
STABILITY: THIS PRODUCT IS STABLE UNDER NORMAL STORAGE CONDITIONS.
| 11. TOXICOLOGICAL INFORMATION | |
EFFECTS OF OVEREXPOSURE - EYE CONTACT:
IRRITATING, AND MAY INJURE EYE TISSUE IF NOT REMOVED PROMPTLY.
EFFECTS OF OVEREXPOSURE - SKIN CONTACT:
LOW HAZARD FOR USUAL INDUSTRIAL HANDLING OR COMMERCIAL HANDLING BY TRAINED
PERSONNEL.
EFFECTS OF OVEREXPOSURE - INHALATION:
HARMFUL IF INHALED. HIGH GAS, VAPOR, MIST OR DUST CONCENTRATIONS MAY BE
HARMFUL IF INHALED. AVOID BREATHING FUMES, SPRAY, VAPORS, OR MIST.
EFFECTS OF OVEREXPOSURE - INGESTION: EXPECTED TO BE A LOW INGESTION HAZARD.
EFFECTS OF OVEREXPOSURE - CHRONIC HAZARDS:
CONTAINS TITANIUM DIOXIDE. TITANIUM DIOXIDE IS LISTED AS A GROUP
2B-"POSSIBLY CARCINOGENIC TO HUMANS" BY IARC. NO SIGNIFICANT EXPOSURE TO
TITANIUM DIOXIDE IS THOUGHT TO OCCUR DURING THE USE OF PRODUCTS IN WHICH
TITANIUM DIOXIDE IS BOUND TO OTHER MATERIALS, SUCH AS IN PAINTS DURING
BRUSH APPLICATION OR DRYING. RISK OF OVEREXPOSURE DEPENDS ON DURATION AND
LEVEL OF EXPOSURE TO DUST FROM REPEATED SANDING OF SURFACES OR SPRAY MIST
AND THE ACTUAL CONCENTRATION OF TITANIUM DIOXIDE IN THE FORMULA. (REF: IARC
MONOGRAPH, VOL. 93, 2010)
PRIMARY ROUTE(S) OF ENTRY:
EYE CONTACT, INGESTION, INHALATION, SKIN ABSORPTION, SKIN CONTACT
ACUTE TOXICITY VALUES:
THE ACUTE EFFECTS OF THIS PRODUCT HAVE NOT BEEN TESTED. DATA ON INDIVIDUAL
COMPONENTS ARE TABULATED BELOW:
CAS-NO. CHEMICAL NAME ORAL LD50 DERMAL LD50 VAPOR LC50
13463-67-7 TITANIUM DIOXIDE >10000 MG/KG N.I. N.I.
RAT
7631-86-9 AMORPHOUS SILICA >5000 MG/KG >2000 MG/KG >2.2 MG/L RAT
RAT RABBIT
N.I. - NO INFORMATION
| 12. ECOLOGICAL INFORMATION | |
ECOLOGICAL INFORMATION: PRODUCT IS A MIXTURE OF LISTED COMPONENTS.
| 13. DISPOSAL INFORMATION | |
DISPOSAL INFORMATION:
DISPOSE OF MATERIAL IN ACCORDANCE TO LOCAL, STATE, AND FEDERAL REGULATIONS
AND ORDINANCES. DO NOT ALLOW TO ENTER WATERWAYS, WASTEWATER, SOIL, STORM
DRAINS OR SEWER SYSTEMS.
| 14. TRANSPORT INFORMATION | |
DOMESTIC INTERNATIONAL AIR (IATA) TDG (CANADA)
(USDOT) (IMDG)
UN NUMBER N.A. N.A. N.A. N.A.
PROPER SHIPPING NAME NOT NOT NOT NOT
REGULATED REGULATED REGULATED REGULATED
HAZARD CLASS N.A. N.A. N.A. N.A.
PACKING GROUP N.A. N.A. N.A. N.A.
LIMITED QUANTITY NO NO NO NO
| 15. REGULATORY INFORMATION | |
U.S. FEDERAL REGULATIONS:
CERCLA - SARA HAZARD CATEGORY:
THIS PRODUCT HAS BEEN REVIEWED ACCORDING TO THE EPA 'HAZARD CATEGORIES'
PROMULGATED UNDER SECTIONS 311 AND 312 OF THE SUPERFUND AMENDMENT AND
REAUTHORIZATION ACT OF 1986 (SARA TITLE III) AND IS CONSIDERED, UNDER
APPLICABLE DEFINITIONS, TO MEET THE FOLLOWING CATEGORIES:
ACUTE HEALTH HAZARD, CHRONIC HEALTH HAZARD
SARA SECTION 313:
THIS PRODUCT CONTAINS THE FOLLOWING SUBSTANCES SUBJECT TO THE REPORTING
REQUIREMENTS OF SECTION 313 OF TITLE III OF THE SUPERFUND AMENDMENT AND
REAUTHORIZATION ACT OF 1986 AND 40 CFR PART 372:
NO SARA 313 COMPONENTS EXIST IN THIS PRODUCT.
TOXIC SUBSTANCES CONTROL ACT:
THIS PRODUCT CONTAINS THE FOLLOWING CHEMICAL SUBSTANCES SUBJECT TO THE
REPORTING REQUIREMENTS OF TSCA 12(B) IF EXPORTED FROM THE UNITED STATES:
NO TSCA 12(B) COMPONENTS EXIST IN THIS PRODUCT.
| 16. OTHER INFORMATION | |
HMIS RATINGS:
HEALTH 1*
FLAMMABILITY 1
PHYSICAL HAZARD 0
PERSONAL PROTECTION X
NFPA RATINGS:
HEALTH 1
FLAMMABILITY 1
INSTABILITY 0
VOLATILE ORGANIC COMPOUNDS, G/L: 0
SDS REVISION DATE: 7/22/2015
REASON FOR REVISION:
LEGEND:
N.A. - NOT APPLICABLE
N.E. - NOT ESTABLISHED
N.D. - NOT DETERMINED
RUST-OLEUM CORPORATION BELIEVES, TO THE BEST OF ITS KNOWLEDGE, INFORMATION
AND BELIEF, THE INFORMATION CONTAINED HEREIN TO BE ACCURATE AND RELIABLE AS
OF THE DATE OF THIS SAFETY DATA SHEET. HOWEVER, BECAUSE THE CONDITIONS OF
HANDLING, USE, AND STORAGE OF THESE MATERIALS ARE BEYOND OUR CONTROL, WE
ASSUME NO RESPONSIBILITY OR LIABILITY FOR PERSONAL INJURY OR PROPERTY
DAMAGE INCURRED BY THE USE OF THESE MATERIALS. RUST-OLEUM CORPORATION MAKES
NO WARRANTY, EXPRESSED OR IMPLIED, REGARDING THE ACCURACY OR RELIABILITY OF
THE DATA OR RESULTS OBTAINED FROM THEIR USE. ALL MATERIALS MAY PRESENT
UNKNOWN HAZARDS AND SHOULD BE USED WITH CAUTION. THE INFORMATION AND
RECOMMENDATIONS IN THIS MATERIAL SAFETY DATA SHEET ARE OFFERED FOR THE
USERS' CONSIDERATION AND EXAMINATION. IT IS THE RESPONSIBILITY OF THE USER
TO DETERMINE THE FINAL SUITABILITY OF THIS INFORMATION AND TO COMPLY WITH
ALL APPLICABLE INTERNATIONAL, FEDERAL, STATE, AND LOCAL LAWS AND
REGULATIONS.