| Common Name: | LEADED SOLDER |
| Manufacturer: | WORTHINGTON CYLINDER |
| SDS Revision Date: | 6/30/2015 |
| SDS Format: | GHS-US |
| Item Number(s): | 1UYH2 |
| Manufacturer Model Number(s): |
SDS Table of Contents
Click the desired link below to jump directly to that section in the SDS.
W
WORTHINGTON CYLINDERS
SAFETY DATA SHEET
| 1. IDENTIFICATION |  |
PRODUCT IDENTIFIER: LEADED SOLDER
OTHER MEANS OF IDENTIFICATION:
SDS NUMBER: WC013
PRODUCT CODE: VARIES
RECOMMENDED USE: SOLDER.
RECOMMENDED RESTRICTIONS: NONE KNOWN.
MANUFACTURER/IMPORTER/SUPPLIER/DISTRIBUTOR INFORMATION:
MANUFACTURER/SUPPLIER: WORTHINGTON CYLINDER CORPORATION
ADDRESS:
200 OLD WILSON BRIDGE ROAD
COLUMBUS, OH 43085
UNITED STATES
EMAIL: CYLINDERS@WORTHINGTONINDUSTRIES.COM
TELEPHONE NUMBER: 866-928-2657
CHEMTREC - 24 HOURS:
WITHIN US AND CANADA: 800-424-9300
OUTSIDE US AND CANADA: +1 703-741-5970 (COLLECT CALLS ACCEPTED)
| 2. HAZARD(S) IDENTIFICATION | |
PHYSICAL HAZARDS: NOT CLASSIFIED.
HEALTH HAZARDS:
GERM CELL MUTAGENICITY: CATEGORY 2
CARCINOGENICITY: CATEGORY 2
REPRODUCTIVE TOXICITY: CATEGORY 1A
SPECIFIC TARGET ORGAN TOXICITY, REPEATED EXPOSURE:
CATEGORY 1 (BLOOD, KIDNEY, NERVOUS SYSTEM)
OSHA DEFINED HAZARDS: NOT CLASSIFIED.
LABEL ELEMENTS: HEALTH HAZARD
SIGNAL WORD: DANGER
HAZARD STATEMENT:
SUSPECTED OF CAUSING GENETIC DEFECTS. SUSPECTED OF CAUSING CANCER. MAY
DAMAGE FERTILITY OR THE UNBORN CHILD. CAUSES DAMAGE TO ORGANS (BLOOD,
KIDNEY, NERVOUS SYSTEM) THROUGH PROLONGED OR REPEATED EXPOSURE.
PRECAUTIONARY STATEMENT:
PREVENTION:
OBTAIN SPECIAL INSTRUCTIONS BEFORE USE. DO NOT HANDLE UNTIL ALL SAFETY
PRECAUTIONS HAVE BEEN READ AND UNDERSTOOD. DO NOT BREATHE DUST/FUME. WASH
THOROUGHLY AFTER HANDLING. DO NOT EAT, DRINK OR SMOKE WHEN USING THIS
PRODUCT. WEAR PROTECTIVE GLOVES/PROTECTIVE CLOTHING/EYE PROTECTION/FACE
PROTECTION.
RESPONSE:
IF EXPOSED OR CONCERNED: GET MEDICAL ADVICE/ATTENTION.
STORAGE: STORE LOCKED UP.
DISPOSAL:
DISPOSE OF CONTENTS/CONTAINER IN ACCORDANCE WITH
LOCAL/REGIONAL/NATIONAL/INTERNATIONAL REGULATIONS.
HAZARD(S) NOT OTHERWISE CLASSIFIED (HNOC): NONE KNOWN.
| 3. COMPOSITION/INFORMATION ON INGREDIENTS | |
MIXTURES:
CHEMICAL NAME CAS NUMBER %
LEAD 7439-92-1 37.5 - 70
TIN 7440-31-5 29.5 - 61.5
COMPOSITION COMMENTS:
ALL CONCENTRATIONS ARE IN PERCENT BY WEIGHT UNLESS INGREDIENT IS A GAS.
GAS CONCENTRATIONS ARE IN PERCENT BY VOLUME.
| 4. FIRST-AID MEASURES | |
INHALATION:
IMMEDIATELY REMOVE FROM FURTHER EXPOSURE. GET IMMEDIATE MEDICAL ASSISTANCE.
FOR THOSE PROVIDING ASSISTANCE, AVOID EXPOSURE TO YOURSELF OR OTHERS. USE
ADEQUATE RESPIRATORY PROTECTION. GIVE SUPPLEMENTAL OXYGEN, IF AVAILABLE. IF
BREATHING HAS STOPPED, ASSIST VENTILATION WITH A MECHANICAL DEVICE OR USE
MOUTH-TO-MOUTH RESUSCITATION.
SKIN CONTACT:
REMOVE CONTAMINATED CLOTHES AND RINSE SKIN THOROUGHLY WITH WATER FOR AT
LEAST 15 MINUTES. IF SKIN RASH OR AN ALLERGIC SKIN REACTION DEVELOPS, GET
MEDICAL ATTENTION.
EYE CONTACT:
RINSE IMMEDIATELY WITH PLENTY OF WATER FOR AT LEAST 15 MINUTES. REMOVE ANY
CONTACT LENSES. GET MEDICAL ATTENTION IF IRRITATION DEVELOPS OR PERSISTS.
INGESTION:
IMMEDIATELY RINSE MOUTH AND DRINK A CUPFUL OF WATER. NEVER GIVE ANYTHING BY
MOUTH TO A VICTIM WHO IS UNCONSCIOUS OR IS HAVING CONVULSIONS. ONLY INDUCE
VOMITING AT THE INSTRUCTION OF MEDICAL PERSONNEL. GET MEDICAL ATTENTION
IMMEDIATELY.
MOST IMPORTANT SYMPTOMS/EFFECTS, ACUTE AND DELAYED:
DUST AND FUMES MAY IRRITATE EYES, SKIN AND UPPER RESPIRATORY TRACT. CONTACT
WITH MOLTEN MATERIAL MAY CAUSE THERMAL BURNS.
INDICATION OF IMMEDIATE MEDICAL ATTENTION AND SPECIAL TREATMENT NEEDED:
TREAT SYMPTOMATICALLY. EXPOSURE MAY AGGRAVATE PRE-EXISTING LUNGS, DISEASES
OF THE BLOOD AND BLOOD FORMING ORGANS, KIDNEYS, NERVOUS, AND POSSIBLY
REPRODUCTIVE SYSTEMS. SYMPTOMS MAY BE DELAYED.
GENERAL INFORMATION:
SHOW THIS SAFETY DATA SHEET TO THE DOCTOR IN ATTENDANCE.
| 5. FIRE-FIGHTING MEASURES | |
SUITABLE EXTINGUISHING MEDIA:
EXTINGUISH WITH FOAM, CARBON DIOXIDE OR DRY POWDER.
UNSUITABLE EXTINGUISHING MEDIA:
DO NOT USE WATER OR HALOGENATED EXTINGUISHING MEDIA.
SPECIFIC HAZARDS ARISING FROM THE CHEMICAL:
FIRE OR HIGH TEMPERATURES CREATE: METAL OXIDES.
SPECIAL PROTECTIVE EQUIPMENT AND PRECAUTIONS FOR FIREFIGHTERS:
SELF-CONTAINED BREATHING APPARATUS AND FULL PROTECTIVE CLOTHING MUST BE
WORN IN CASE OF FIRE.
FIRE FIGHTING EQUIPMENT/INSTRUCTIONS:
MOVE CONTAINERS FROM FIRE AREA IF YOU CAN DO IT WITHOUT RISK.
GENERAL FIRE HAZARDS:
SOLID METAL IS NOT FLAMMABLE; HOWEVER, FINELY DIVIDED METALLIC DUST OR
POWDER MAY FORM AN EXPLOSIVE MIXTURE WITH AIR.
| 6. ACCIDENTAL RELEASE MEASURES | |
PERSONAL PRECAUTIONS, PROTECTIVE EQUIPMENT AND EMERGENCY PROCEDURES:
KEEP UNNECESSARY PERSONNEL AWAY. AVOID INHALATION OF DUST FROM THE SPILLED
MATERIAL. WEAR PROTECTIVE CLOTHING AS DESCRIBED IN SECTION 8 OF THIS SDS.
DO NOT TOUCH DAMAGED CONTAINERS OR SPILLED MATERIAL UNLESS WEARING
APPROPRIATE PROTECTIVE CLOTHING.
METHODS AND MATERIALS FOR CONTAINMENT AND CLEANING UP:
FOR A DRY MATERIAL SPILL, USE A HEPA (HIGH EFFICIENCY PARTICLE AIR) VACUUM
TO COLLECT MATERIAL AND PLACE IN A SEALABLE CONTAINER FOR DISPOSAL. AVOID
DUST FORMATION. RECOVER AND RECYCLE, IF PRACTICAL. KEEP OUT OF WATER
SUPPLIES AND SEWERS.
ENVIRONMENTAL PRECAUTIONS:
PREVENT FURTHER LEAKAGE OR SPILLAGE IF SAFE TO DO SO. DO NOT CONTAMINATE
WATER.
IF RELEASE OCCURS IN THE U.S. AND IS REPORTABLE UNDER CERCLA SECTION 103,
NOTIFY THE NATIONAL RESPONSE CENTER AT (800)424-8802 (USA)
OR (202)426-2675 (USA).
| 7. HANDLING AND STORAGE | |
PRECAUTIONS FOR SAFE HANDLING:
WEAR APPROPRIATE PERSONAL PROTECTIVE EQUIPMENT (SEE SECTION 8). KEEP
FORMATION OF AIRBORNE DUSTS TO A MINIMUM. PROVIDE APPROPRIATE EXHAUST
VENTILATION AT PLACES WHERE DUST IS FORMED. AVOID INHALATION OF DUST
AND FUMES. AVOID CONTACT WITH SKIN AND EYES. DO NOT GET THIS MATERIAL
ON CLOTHING. DO NOT EAT, DRINK OR SMOKE WHEN USING THE PRODUCT. WASH
THOROUGHLY AFTER HANDLING.
AVOID RELEASE TO THE ENVIRONMENT. FOLLOW SPECIAL NATIONAL PROVISIONS
RELATED TO WORK WITH LEAD AND ITS COMPOUNDS. PREGNANT WOMEN SHOULD NOT
WORK WITH THE PRODUCT, IF THERE IS THE LEAST RISK OF LEAD EXPOSURE.
ANY SURFACE THAT COMES IN CONTACT WITH MOLTEN METAL MUST BE PREHEATED OR
SPECIALLY COATED AND RUST FREE. INADVERTENT CONTAMINANTS TO PRODUCT SUCH
AS MOISTURE, ICE, SNOW, GREASE, OR OIL CAN CAUSE AN EXPLOSION WHEN CHARGED
TO A MOLTEN METAL BATH OR METAL FURNACE (PREHEATING METAL WILL REMOVE
MOISTURE FROM PRODUCT).
CONDITIONS FOR SAFE STORAGE, INCLUDING ANY INCOMPATIBILITIES:
STORE IN TIGHTLY CLOSED ORIGINAL CONTAINER IN A DRY, COOL AND
WELL-VENTILATED PLACE. STORE IN A CLOSED CONTAINER AWAY FROM INCOMPATIBLE
MATERIALS. KEEP OUT OF REACH OF CHILDREN. KEEP AWAY FROM FOOD, DRINK AND
ANIMAL FEEDINGSTUFFS.
| 8. EXPOSURE CONTROLS/PERSONAL PROTECTION | |
OCCUPATIONAL EXPOSURE LIMITS:
US. OSHA SPECIFICALLY REGULATED SUBSTANCES (29 CFR 1910.1001-1050):
COMPONENTS TYPE VALUE
LEAD (CAS 7439-92-1) TWA 0.05 MG/M3
US. OSHA TABLE Z-1 LIMITS FOR AIR CONTAMINANTS (29 CFR 1910.1000):
COMPONENTS TYPE VALUE
TIN (CAS 7440-31-5) PEL 2 MG/M3
US. ACGIH THRESHOLD LIMIT VALUES:
COMPONENTS TYPE VALUE
LEAD (CAS 7439-92-1) TWA 0.05 MG/M3
TIN (CAS 7440-31-5) TWA 2 MG/M3
US. NIOSH: POCKET GUIDE TO CHEMICAL HAZARDS
COMPONENTS TYPE VALUE
LEAD (CAS 7439-92-1) TWA 0.05 MG/M3
TIN (CAS 7440-31-5) TWA 2 MG/M3
BIOLOGICAL LIMIT VALUES:
ACGIH BIOLOGICAL EXPOSURE INDICES:
COMPONENTS VALUE DETERMINANT SPECIMEN SAMPLING TIME
LEAD 300 (MICRO)G/L LEAD BLOOD *
(CAS 7439-92-1)
* - FOR SAMPLING DETAILS, PLEASE SEE THE SOURCE DOCUMENT.
EXPOSURE GUIDELINES: NO EXPOSURE STANDARDS ALLOCATED.
APPROPRIATE ENGINEERING CONTROLS:
PROVIDE ADEQUATE VENTILATION. OBSERVE OCCUPATIONAL EXPOSURE LIMITS AND
MINIMIZE THE RISK OF INHALATION OF DUST. KEEP MELTING/SOLDERING
TEMPERATURES AS LOW AS POSSIBLE TO MINIMIZE THE GENERATION OF FUME. SHOWER,
HAND AND EYE WASHING FACILITIES NEAR THE WORKPLACE ARE RECOMMENDED.
INDIVIDUAL PROTECTION MEASURES, SUCH AS PERSONAL PROTECTIVE EQUIPMENT:
EYE/FACE PROTECTION:
WEAR SAFETY GLASSES WITH SIDE SHIELDS (OR GOGGLES). WEAR A FACE SHIELD WHEN
WORKING WITH MOLTEN MATERIAL.
SKIN PROTECTION:
HAND PROTECTION: WEAR PROTECTIVE GLOVES (I.E. LATEX, NITRILE, NEOPRENE).
OTHER: CHEMICAL RESISTANT CLOTHING IS RECOMMENDED.
RESPIRATORY PROTECTION:
USE A RESPIRATOR WHEN LOCAL EXHAUST OR VENTILATION IS NOT ADEQUATE TO KEEP
EXPOSURES BELOW THE OEL. IN A CONFINED SPACE A SUPPLIED RESPIRATOR MAY BE
REQUIRED. SELECTION AND USE OF RESPIRATORY PROTECTIVE EQUIPMENT SHOULD BE
IN ACCORDANCE WITH OSHA GENERAL INDUSTRY STANDARD 29 CFR 1910.134; OR IN
CANADA WITH CSA STANDARD Z94.4. USE A NIOSH/MSHA APPROVED RESPIRATOR IF
THERE IS A RISK OF EXPOSURE TO DUST/FUME AT LEVELS EXCEEDING THE EXPOSURE
LIMITS.
THERMAL HAZARDS:
HEAT RESISTANT/INSULATED GLOVES AND CLOTHING ARE RECOMMENDED WHEN WORKING
WITH MOLTEN MATERIAL.
GENERAL HYGIENE CONSIDERATIONS:
ALWAYS OBSERVE GOOD PERSONAL HYGIENE MEASURES, SUCH AS WASHING AFTER
HANDLING THE MATERIAL AND BEFORE EATING, DRINKING, AND/OR SMOKING.
ROUTINELY WASH WORK CLOTHING AND PROTECTIVE EQUIPMENT TO REMOVE
CONTAMINANTS. OBSERVE ANY MEDICAL SURVEILLANCE REQUIREMENTS.
| 9. PHYSICAL AND CHEMICAL PROPERTIES | |
APPEARANCE: SILVER TO SILVER-GRAY METALLIC METAL.
PHYSICAL STATE: SOLID.
FORM: WIRE.
COLOR: SILVER TO GRAY.
ODOR: ODORLESS.
ODOR THRESHOLD: NOT AVAILABLE.
PH: NOT APPLICABLE.
MELTING POINT/FREEZING POINT:
449.6 DEG. F (232 DEG. C) TIN
620.6 DEG. F (327 DEG. C) LEAD
INITIAL BOILING POINT AND BOILING RANGE:
3171.2 DEG. F (1744 DEG. C) LEAD
4100 DEG. F (2260 DEG. C) TIN
FLASH POINT: NOT APPLICABLE.
EVAPORATION RATE: NOT AVAILABLE.
FLAMMABILITY (SOLID, GAS): NON FLAMMABLE.
UPPER/LOWER FLAMMABILITY OR EXPLOSIVE LIMITS:
FLAMMABILITY LIMIT - LOWER (%): NOT AVAILABLE.
FLAMMABILITY LIMIT - UPPER (%): NOT AVAILABLE.
VAPOR PRESSURE: NOT AVAILABLE.
VAPOR DENSITY: NOT AVAILABLE.
RELATIVE DENSITY: 5.38 - 11.27
RELATIVE DENSITY TEMPERATURE: (ALLOY DEPENDENT)
SOLUBILITY(IES):
SOLUBILITY (WATER): NOT SOLUBLE
PARTITION COEFFICIENT (N-OCTANOL/WATER): NOT AVAILABLE.
AUTO-IGNITION TEMPERATURE: NOT APPLICABLE.
DECOMPOSITION TEMPERATURE: NOT AVAILABLE.
VISCOSITY: NOT APPLICABLE.
| 10. STABILITY AND REACTIVITY | |
REACTIVITY:
THE PRODUCT IS NON-REACTIVE UNDER NORMAL CONDITIONS OF USE, STORAGE AND
TRANSPORT.
CHEMICAL STABILITY: MATERIAL IS STABLE UNDER NORMAL CONDITIONS.
POSSIBILITY OF HAZARDOUS REACTIONS:
HAZARDOUS POLYMERIZATION DOES NOT OCCUR.
CONDITIONS TO AVOID:
CONTACT WITH INCOMPATIBLE MATERIALS. AVOID MOLTEN METAL CONTACT WITH WATER.
INCOMPATIBLE MATERIALS:
STRONG OXIDIZING AGENTS. HYDROGEN PEROXIDE (H2O2). CHLORINE. TURPENTINE.
SODIUM. POTASSIUM. LEAD FUSED WITH AMMONIUM NITRATE MAY CAUSE A VIOLENT
REACTION.
HAZARDOUS DECOMPOSITION PRODUCTS:
TOXIC METAL OXIDES ARE EMITTED WHEN HEATED ABOVE THE MELTING POINT.
| 11. TOXICOLOGICAL INFORMATION | |
INFORMATION ON LIKELY ROUTES OF EXPOSURE:
INHALATION:
ELEVATED TEMPERATURES OR MECHANICAL ACTION MAY FORM DUST AND FUMES WHICH
MAY BE IRRITATING TO THE MUCOUS MEMBRANES AND RESPIRATORY TRACT.
SKIN CONTACT: DUST MAY IRRITATE SKIN.
EYE CONTACT:
ELEVATED TEMPERATURES OR MECHANICAL ACTION MAY FORM DUST AND FUMES WHICH
MAY BE IRRITATING TO THE EYE.
INGESTION: MAY CAUSE DISCOMFORT IF SWALLOWED.
SYMPTOMS RELATED TO THE PHYSICAL, CHEMICAL AND TOXICOLOGICAL
CHARACTERISTICS:
ELEVATED TEMPERATURES OR MECHANICAL ACTION MAY FORM DUST AND FUMES WHICH
MAY BE IRRITATING TO THE EYE, MUCOUS MEMBRANES AND RESPIRATORY TRACT.
CONTACT WITH MOLTEN MATERIAL MAY CAUSE THERMAL BURNS.
INFORMATION ON TOXICOLOGICAL EFFECTS:
ACUTE TOXICITY:
HIGH CONCENTRATIONS OF FRESHLY FORMED FUMES/DUSTS OF METAL OXIDES CAN
PRODUCE SYMPTOMS OF METAL FUME FEVER. WHEN HEATED, THE VAPORS/FUMES GIVEN
OFF MAY CAUSE RESPIRATORY TRACT IRRITATION. OVEREXPOSURE TO LEAD MAY LEAD
TO CENTRAL NERVOUS SYSTEM DISORDERS, CHARACTERIZED BY DROWSINESS, SEIZURES,
COMA AND DEATH. IT SHOULD BE RECOGNIZED THAT EXPOSURES OF THIS MAGNITUDE IN
AN INDUSTRIAL SETTING ARE EXTREMELY UNLIKELY. OVEREXPOSURE OF TIN CAN CAUSE
IRRITATION OF THE EYES, SKIN, MUCOUS MEMBRANES, AND RESPIRATORY SYSTEM.
SKIN CORROSION/IRRITATION: DUST MAY IRRITATE SKIN.
SERIOUS EYE DAMAGE/EYE IRRITATION:
ELEVATED TEMPERATURES OR MECHANICAL ACTION MAY FORM DUST AND FUMES WHICH
MAY BE IRRITATING TO THE EYE.
RESPIRATORY OR SKIN SENSITIZATION:
RESPIRATORY SENSITIZATION: NO SENSITIZING EFFECTS KNOWN.
SKIN SENSITIZATION: NO SENSITIZING EFFECTS KNOWN.
GERM CELL MUTAGENICITY: SUSPECTED OF CAUSING GENETIC DEFECTS.
CARCINOGENICITY: SUSPECTED OF CAUSING CANCER.
IARC MONOGRAPHS. OVERALL EVALUATION OF CARCINOGENICITY:
LEAD (CAS 7439-92-1): 2B POSSIBLY CARCINOGENIC TO HUMANS.
NTP REPORT ON CARCINOGENS:
LEAD (CAS 7439-92-1): REASONABLY ANTICIPATED TO BE A HUMAN CARCINOGEN.
OSHA SPECIFICALLY REGULATED SUBSTANCES (29 CFR 1910.1001-1050): NOT LISTED.
REPRODUCTIVE TOXICITY:
MAY DAMAGE FERTILITY OR THE UNBORN CHILD. LEAD IS A TERATOGEN. ELEVATED
LEAD EXPOSURE OF EITHER PARENT BEFORE PREGNANCY MAY INCREASE THE CHANGES OF
MISCARRIAGE OR BIRTH DEFECTS. CONTINUOUS EXPOSURE MAY RESULT IN DECREASED
FERTILITY. EXPOSURE OF THE MOTHER DURING PREGNANCY MAY CAUSE BIRTH DEFECTS.
SPECIFIC TARGET ORGAN TOXICITY - SINGLE EXPOSURE: NOT CLASSIFIED.
SPECIFIC TARGET ORGAN TOXICITY - REPEATED EXPOSURE:
CAUSES DAMAGE TO ORGANS (BLOOD, KIDNEY, NERVOUS SYSTEM) THROUGH PROLONGED
OR REPEATED EXPOSURE.
ASPIRATION HAZARD: NOT RELEVANT, DUE TO THE FORM OF THE PRODUCT.
CHRONIC EFFECTS:
ROLONGED AND REPEATED OVEREXPOSURE TO DUST AND FUMES CAN LEAD TO BENIGN
PNEUMOCONIOSIS (STANNOSIS). OVEREXPOSURE TO LEAD CAN LEAD TO SYSTEMIC LEAD
POISONING WITH SYMPTOMS OF METALLIC TASTE, ANEMIA, INSOMNIA, WEAKNESS,
CONSTIPATION, ABDOMINAL PAIN, GASTROINTESTINAL DISORDERS, JOINT AND MUSCLE
PAINS, AND MUSCULAR WEAKNESS, AND MAY CAUSE DAMAGE TO THE BLOOD FORMING,
NERVOUS, KIDNEYS AND REPRODUCTIVE SYSTEMS. DAMAGE MAY INCLUDE REDUCED
FERTILITY IN BOTH MEN AND WOMEN, DAMAGE TO THE FETUS OF THE EXPOSED
PREGNANT WOMAN, ANEMIA, MUSCULAR WEAKNESS AND KIDNEY DYSFUNCTION.
OVEREXPOSURE TO TIN CAN RESULT IN BENIGN PNEUMOCONIOSIS (STANNOUS). THIS
FORM OF PNEUMOCONIOSIS PRODUCES PROGRESSIVE X-RAY CHANGES OF THE LUNGS AS
LONG AS EXPOSURE EXISTS, BUT THERE IS NO DISTINCTIVE FIBROSIS, NO EVIDENCE
OF DISABILITY AND NO SPECIAL COMPLICATING FACTORS.
FURTHER INFORMATION:
LEAD IS ACCUMULATED IN THE BODY AND MAY CAUSE DAMAGE TO THE BRAIN AND
NERVOUS SYSTEM AFTER PROLONGED EXPOSURE.
| 12. ECOLOGICAL INFORMATION | |
ECOTOXICITY:
ALLOYS IN MASSIVE FORMS PRESENT A LIMITED HAZARD FOR THE ENVIRONMENT.
PERSISTENCE AND DEGRADABILITY: THE PRODUCT IS NOT BIODEGRADABLE.
BIOACCUMULATIVE POTENTIAL: NO DATA AVAILABLE.
MOBILITY IN SOIL:
ALLOYS IN MASSIVE FORMS ARE NOT MOBILE IN THE ENVIRONMENT.
OTHER ADVERSE EFFECTS: NONE EXPECTED.
| 13. DISPOSAL CONSIDERATIONS | |
DISPOSAL INSTRUCTIONS:
DISPOSE IN ACCORDANCE WITH ALL APPLICABLE REGULATIONS.
HAZARDOUS WASTE CODE:
PRODUCT CONTAINS LEAD A HAZARDOUS WASTE CONSTITUENT REGULATED UNDER
40 CFR 261.24.
WASTE FROM RESIDUES / UNUSED PRODUCTS:
DISPOSE OF IN ACCORDANCE WITH LOCAL REGULATIONS. SCRAPPED MATERIAL SHOULD
BE SENT FOR REFINING TO RECOVER PRECIOUS METAL CONTENT. SOLID METAL AND
ALLOYS IN THE FORM OF PARTICLES MAY BE REACTIVE. ITS HAZARDOUS
CHARACTERISTICS, INCLUDING FIRE AND EXPLOSION, SHOULD BE DETERMINED PRIOR
TO DISPOSAL.
CONTAMINATED PACKAGING:
SINCE EMPTIED CONTAINERS MAY RETAIN PRODUCT RESIDUE, FOLLOW LABEL WARNINGS
EVEN AFTER CONTAINER IS EMPTIED.
| 14. TRANSPORT INFORMATION | |
DOT: NOT REGULATED AS DANGEROUS GOODS.
IATA: NOT REGULATED AS DANGEROUS GOODS.
IMDG: NOT REGULATED AS DANGEROUS GOODS.
TRANSPORT IN BULK ACCORDING TO ANNEX II OF MARPOL 73/78 AND THE IBC CODE:
NOT APPLICABLE.
| 15. REGULATORY INFORMATION | |
US FEDERAL REGULATIONS:
THIS PRODUCT IS A "HAZARDOUS CHEMICAL" AS DEFINED BY THE OSHA HAZARD
COMMUNICATION STANDARD, 29 CFR 1910.1200.
ALL COMPONENTS ARE ON THE U.S. EPA TSCA INVENTORY LIST.
US CLEAN WATER ACT NOTICE: THE USE OF THIS SOLDER IN MAKING JOINTS OR
FITTINGS IN ANY PRIVATE OR PUBLIC DRINKING WATER SUPPLY SYSTEM IS
PROHIBITED BY THE CLEAN WATER ACT.
TSCA SECTION 12(B) EXPORT NOTIFICATION (40 CFR 707, SUBPT. D):
NOT REGULATED.
OSHA SPECIFICALLY REGULATED SUBSTANCES (29 CFR 1910.1001-1050):
LEAD (CAS 7439-92-1):
REPRODUCTIVE TOXICITY
CENTRAL NERVOUS SYSTEM
KIDNEY
BLOOD
ACUTE TOXICITY
CERCLA HAZARDOUS SUBSTANCE LIST (40 CFR 302.4):
LEAD (CAS 7439-92-1): LISTED
SUPERFUND AMENDMENTS AND REAUTHORIZATION ACT OF 1986 (SARA):
HAZARD CATEGORIES:
IMMEDIATE HAZARD: NO
DELAYED HAZARD: YES
FIRE HAZARD: NO
PRESSURE HAZARD: NO
REACTIVITY HAZARD: NO
SARA 302 EXTREMELY HAZARDOUS SUBSTANCE: NOT LISTED.
SARA 311/312 HAZARDOUS CHEMICAL: YES
SARA 313 (TRI REPORTING):
CHEMICAL NAME CAS NUMBER % BY WT.
LEAD 7439-92-1 37.5 - 70
OTHER FEDERAL REGULATIONS:
CLEAN AIR ACT (CAA) SECTION 112 HAZARDOUS AIR POLLUTANTS (HAPS) LIST:
LEAD (CAS 7439-92-1)
CLEAN AIR ACT (CAA) SECTION 112(R) ACCIDENTAL RELEASE PREVENTION
(40 CFR 68.130): NOT REGULATED.
SAFE DRINKING WATER ACT (SDWA): NOT REGULATED.
US STATE REGULATIONS:
WARNING:
THIS PRODUCT CONTAINS A CHEMICAL KNOWN TO THE STATE OF CALIFORNIA TO CAUSE
CANCER AND BIRTH DEFECTS OR OTHER REPRODUCTIVE HARM.
US. MASSACHUSETTS RTK - SUBSTANCE LIST:
LEAD (CAS 7439-92-1)
TIN (CAS 7440-31-5)
US. NEW JERSEY WORKER AND COMMUNITY RIGHT-TO-KNOW ACT:
LEAD (CAS 7439-92-1)
TIN (CAS 7440-31-5)
US. PENNSYLVANIA WORKER AND COMMUNITY RIGHT-TO-KNOW LAW:
LEAD (CAS 7439-92-1)
TIN (CAS 7440-31-5)
US. RHODE ISLAND RTK: LEAD (CAS 7439-92-1)
US. CALIFORNIA PROPOSITION 65:
US - CALIFORNIA PROPOSITION 65 - CARCINOGENS & LISTED SUBSTANCE
REPRODUCTIVE TOXICITY (CRT)
LEAD (CAS 7439-92-1)
INTERNATIONAL INVENTORIES:
COUNTRY(S) INVENTORY NAME ON INVENTORY
OR REGION (YES/NO)*
AUSTRALIA AUSTRALIAN INVENTORY OF CHEMICAL YES
SUBSTANCES (AICS)
CANADA DOMESTIC SUBSTANCES LIST (DSL) YES
CANADA NON-DOMESTIC SUBSTANCES LIST (NDSL) NO
CHINA INVENTORY OF EXISTING CHEMICAL SUBSTANCES YES
IN CHINA (IECSC)
EUROPE EUROPEAN INVENTORY OF EXISTING COMMERCIAL YES
CHEMICAL SUBSTANCES (EINECS)
EUROPE EUROPEAN LIST OF NOTIFIED CHEMICAL NO
SUBSTANCES (ELINCS)
JAPAN INVENTORY OF EXISTING AND NEW CHEMICAL NO
SUBSTANCES (ENCS)
KOREA EXISTING CHEMICALS LIST (ECL) YES
NEW ZEALAND NEW ZEALAND INVENTORY YES
PHILIPPINES PHILIPPINE INVENTORY OF CHEMICALS AND YES
CHEMICAL SUBSTANCES (PICCS)
UNITED STATES & TOXIC SUBSTANCES CONTROL ACT (TSCA) YES
PUERTO RICO INVENTORY
*A "YES" INDICATES THIS PRODUCT COMPLIES WITH THE INVENTORY REQUIREMENTS
ADMINISTERED BY THE GOVERNING COUNTRY(S).
A "NO" INDICATES THAT ONE OR MORE COMPONENTS OF THE PRODUCT ARE NOT LISTED
OR EXEMPT FROM LISTING ON THE INVENTORY ADMINISTERED BY THE GOVERNING
COUNTRY(S).
| 16. OTHER INFORMATION, INCLUDING DATE OF PREPARATION | |
OR LAST REVISION
ISSUE DATE: 30-JUNE-2015
REVISION DATE:
VERSION #: 01
FURTHER INFORMATION:
SEE U.S. OSHA LEAD STANDARD, 29 CFR 1910.1025 FOR SPECIFIC GUIDANCE,
MEDICAL EVALUATION REQUIREMENTS AND OTHER INFORMATION RELATED TO THE
HANDLING OF THIS PRODUCT.
HMIS(R*) IS A REGISTERED TRADE AND SERVICE MARK OF THE NPCA.
A HMIS(R*) HEALTH RATING INCLUDING AN * INDICATES A CHRONIC HAZARD.
HMIS(R*) RATINGS:
HEALTH 1*
FLAMMABILITY 0
PHYSICAL HAZARD 0
NFPA RATINGS:
1
0
0
REFERENCES:
ACGIH:
EPA: AQUIRE DATABASE
NLM: HAZARDOUS SUBSTANCES DATA BASE
US. IARC MONOGRAPHS ON OCCUPATIONAL EXPOSURES TO CHEMICAL AGENTS
HSDB(R*) - HAZARDOUS SUBSTANCES DATA BANK
IARC MONOGRAPHS. OVERALL EVALUATION OF CARCINOGENICITY
NATIONAL TOXICOLOGY PROGRAM (NTP) REPORT ON CARCINOGENS
ACGIH DOCUMENTATION OF THE THRESHOLD LIMIT VALUES AND BIOLOGICAL EXPOSURE
INDICES
DISCLAIMER:
ALL INFORMATION IN THIS MATERIAL SAFETY DATA SHEET IS BELIEVED TO BE
ACCURATE AND RELIABLE. HOWEVER, NO GUARANTEE OR WARRANTY OF ANY KIND IS
MADE WITH REGARD TO THE ACCURACY OF INFORMATION OR THE SUITABILITY OF THE
RECOMMENDATIONS CONTAINED HEREIN. IT IS THE USER'S RESPONSIBILITY TO ASSESS
THE SAFETY AND TOXICITY OF THIS PRODUCT UNDER THEIR OWN CONDITIONS OF USE
AND TO COMPLY WITH ALL APPLICABLE LAWS AND REGULATIONS.
909041
SDS US