| Common Name: | FASTENMASTER UX1322-15 |
| Manufacturer: | OMG |
| SDS Revision Date: | 6/1/2016 |
| SDS Format: | GHS-US |
| Item Number(s): | 21R552 |
| Manufacturer Model Number(s): |
SDS Table of Contents
Click the desired link below to jump directly to that section in the SDS.
FASTENMASTER
FASTER EASIER STRONGER
SAFETY DATA SHEET
REV.: 0, 1 JUNE 2016
| 1. PRODUCT AND COMPANY IDENTIFICATION |  |
PRODUCT NAME: FASTENMASTER UX1322-15
SUPPLIER AND RESPONSIBLE PARTY:
OMG, INC.
153 BOWLES ROAD
AGAWAM, MA 01001
USA
PHONE: (01) 413-789-0252
FAX: (01) 413-786-1453
WWW.FASTENMASTER.COM
24-HOUR EMERGENCY RESPONSE NUMBER:
CHEMTREC: 800-424-9300
PRODUCT USE(S): INDUSTRIAL HOT MELT ADHESIVE
| 2. HAZARDS IDENTIFICATION | |
CLASSIFICATION(S): NONE APPLICABLE
SYMBOL(S): NONE APPLICABLE
SIGNAL WORD(S): NONE APPLICABLE
HAZARD STATEMENT(S): NONE APPLICABLE
PRECAUTIONARY STATEMENT(S): NONE APPLICABLE
| 3. COMPOSITION/INFORMATION ON INGREDIENTS | |
THIS FORMULA OF THIS PRODUCT IS A TRADE SECRET. NO INGREDIENTS PRESENT AT
CONCENTRATIONS >0.1% ARE CLASSIFIED AS HEALTH HAZARDS OR PHYSICAL HAZARDS
PER U.S. HAZCOM REGULATIONS (29 CFR 1910.1200) OR CANADA'S HAZARDOUS
PRODUCTS REGULATIONS (SOR/DORS/ 2015-17).
| 4. FIRST AID MEASURES | |
EYES:
IF EYES CONTACT MOLTEN PRODUCT, IMMEDIATELY FLUSH WITH WATER FOR AT
LEAST FIFTEEN MINUTES. DO NOT ATTEMPT REMOVAL OF PRODUCT FROM EYES.
SEEK IMMEDIATE MEDICAL ASSISTANCE.
SKIN:
IF MOLTEN PRODUCT CONTACTS SKIN, DRENCH WITH WATER FOR AT LEAST FIVE
MINUTES. COVER WITH GAUZE AND SEEK IMMEDIATE MEDICAL ASSISTANCE. DO
NOT ATTEMPT REMOVAL OF PRODUCT FROM SKIN.
INGESTION:
INGESTION OF SOLID PRODUCT MAY CAUSE NAUSEA AND GASTROINTESTINAL
IRRITATION.
INHALATION:
IF EXPOSED TO FUMES OF DECOMPOSITION FROM OVERHEATING THE PRODUCT, REMOVE
SUBJECT TO FRESH AIR AND KEEP COMFORTABLE FOR BREATHING. SEEK MEDICAL
ATTENTION IF NECESSARY. KEEP THE SUBJECT WARM AND AT REST.
GUIDANCE FOR PHYSICIAN OR POISON CONTROL CENTER:
NONE OF THE COMPONENTS OF THIS PRODUCT ARE ACUTELY TOXIC BY INGESTION OR
INHALATION, NOR ARE ANY KNOWN TO BE ABSORBED THROUGH INTACT SKIN. EYE
CONTACT WITH MOLTEN PRODUCT CAN CAUSE SEVERE INJURY. SKIN CONTACT WITH
MOLTEN PRODUCT CAN CAUSE SKIN BURNS. INGESTION IS UNLIKELY TO OCCUR IN
INDUSTRIAL USE, BUT IF INGESTION OCCURS IT MAY CAUSE NAUSEA AND
GASTROINTESTINAL IRRITATION.
| 5. FIREFIGHTING MEASURES | |
EXTINGUISHING MEDIA: USE DRY CHEMICAL, FOAM, OR CARBON DIOXIDE.
FIRE AND EXPLOSION HAZARDS:
THIS PRODUCT IS NONFLAMMABLE AND NONCOMBUSTIBLE. IF PRESENT IN A FIRE
OR EXPLOSION, POTENTIAL THERMAL DECOMPOSITION BYPRODUCTS INCLUDE SMOKE,
CARBON MONOXIDE, AND IRRITANT DECOMPOSITION BYPRODUCTS.
FIREFIGHTING INSTRUCTIONS:
IF FIGHTING A FIRE IN WHICH THIS PRODUCT IS PRESENT, WEAR A SELF-CONTAINED
BREATHING APPARATUS WITH FULL-FACEPIECE OPERATED IN PRESSURE-DEMAND OR
OTHER POSITIVE PRESSURE MODE.
| 6. ACCIDENTAL RELEASE MEASURES | |
METHODS AND MATERIALS:
CLEAN UP SPILLED PRODUCT FOR REUSE OR DISPOSAL. IF MOLTEN PRODUCT IS
SPILLED, ALLOW TO COOL AND SOLIDIFY BEFORE HANDLING.
PERSONAL PRECAUTIONS: NO SPECIAL PERSONAL PRECAUTIONS ARE REQUIRED.
ENVIRONMENTAL PRECAUTIONS:
PREVENT PRODUCT FROM ENTERING SEWERS OR CONTAMINATING SOIL.
| 7. HANDLING AND STORAGE | |
HANDLING PRECAUTIONS: NO SPECIAL HANDLING PRECAUTIONS ARE REQUIRED.
WORK AND HYGIENE PRACTICES:
AS GOOD HYGIENE PRACTICE FOLLOWING USE OF THE PRODUCT, WASH HANDS AND FACE
BEFORE EATING, DRINKING, OR USING COSMETICS OR TOBACCO.
STORAGE PRECAUTIONS:
STORE AT <120 DEG. F./49 DEG. C. AND AWAY FROM INCOMPATIBLE MATERIALS
(SEE SECTION #10).
| 8. EXPOSURE CONTROLS AND PERSONAL PROTECTION | |
INGREDIENTS EXPOSURE LIMITS:
THERE ARE NO OSHA PERMISSIBLE EXPOSURE LIMITS OR ACGIH THRESHOLD LIMIT
VALUES FOR ANY INGREDIENTS OF THE PRODUCT.
INGREDIENTS BIOLOGICAL LIMITS:
THERE ARE NO ACGIH BIOLOGICAL EXPOSURE INDICES OR OTHER BIOLOGICAL LIMITS
FOR ANY INGREDIENTS OF THE PRODUCT.
ENGINEERING CONTROLS:
LOCAL EXHAUST VENTILATION IS NOT REQUIRED WHEN USING THIS PRODUCT IN
ACCORDANCE WITH INSTRUCTIONS.
EYE/FACE PROTECTION:
WEAR EYE PROTECTION ADEQUATE TO PREVENT EYE CONTACT WITH THE PRODUCT.
PLASTIC-FRAME SPECTACLES WITH SIDE SHIELDS OR CHEMICAL GOGGLES ARE
RECOMMENDED. IF SPRAYING OR SPLASHING OF PRODUCT IS POSSIBLE, WEAR
A FACE SHIELD.
SKIN PROTECTION:
WEAR PROTECTIVE GLOVES AND CLOTHING TO PREVENT INJURY FROM SKIN CONTACT
WITH MOLTEN PRODUCT.
RESPIRATORY PROTECTION:
A NEED FOR RESPIRATORY PROTECTION IS NOT ANTICIPATED WHEN THE PRODUCT IS
USED IN ACCORDANCE WITH INSTRUCTIONS. IF A RESPIRATOR IS WORN FOR COMFORT,
USE OF A NIOSH-APPROVED RESPIRATOR IS RECOMMENDED. CONSULT THE SPECIFIC
OSHA REGULATIONS (29 CFR 1910.134) AND/OR AMERICAN NATIONAL STANDARD Z88.2
(ANSI, NEW YORK, NY 10036, USA) FOR GUIDANCE.
| 9. PHYSICAL AND CHEMICAL PROPERTIES | |
APPEARANCE: MILKY SOLID
ODOR: LIGHT
ODOR THRESHOLD: NOT DETERMINED
PH: NOT APPLICABLE
MELTING POINT: APPROX. 209 DEG. F./98 DEG. C.
FREEZING POINT: NOT DETERMINED
BOILING POINT/BOILING RANGE: NOT DETERMINED
FLASH POINT: >500 DEG. F./260 DEG. C.
AUTOIGNITION POINT: NOT DETERMINED
FLAMMABILITY CLASS: NOT APPLICABLE
LOWER/UPPER EXPLOSIVE LIMITS: NOT DETERMINED
VAPOR PRESSURE: NOT APPLICABLE
VAPOR DENSITY: NOT APPLICABLE
EVAPORATION RATE: NOT APPLICABLE
PERCENTAGE VOCS: NOT DETERMINED
RELATIVE DENSITY (H2O): NOT DETERMINED
SOLUBILITY (H2O): INSOLUBLE
OIL-WATER PARTITION COEFFICIENT: NOT DETERMINED
DECOMPOSITION TEMPERATURE: NOT DETERMINED
VISCOSITY: 1,650 - 500 CPS @ 350 DEG. F./177 DEG. C.
| 10. STABILITY AND REACTIVITY | |
STABILITY AND REACTIVITY: STABLE AND NON-REACTIVE
CONDITIONS TO AVOID:
TO PREVENT DECOMPOSITION, PRODUCT SHOULD NOT BE OVERHEATED.
HAZARDOUS POLYMERIZATION: WILL NOT OCCUR
INCOMPATIBLE MATERIALS: OXIDIZING AGENTS
POTENTIAL DECOMPOSITION BYPRODUCTS:
CARBON MONOXIDE, CARBON DIOXIDE, SMOKE, AND IRRITANT DECOMPOSITION
BYPRODUCTS
| 11. TOXICOLOGICAL INFORMATION | |
INGREDIENT TOXICOLOGY DATA:
NO TOXICOLOGY DATA IS AVAILABLE FOR ANY OF THE INGREDIENTS VIA ANY ROUTE OF
EXPOSURE.
PRIMARY ROUTE(S) OF ENTRY: INGESTION
EYE HAZARDS: IN MOLTEN FORM, THIS PRODUCT CAN CAUSE SEVERE EYE INJURY.
SKIN HAZARDS: IN MOLTEN FORM, THIS PRODUCT MAY CAUSE SKIN BURNS.
INGESTION HAZARDS: THE PRODUCT IS NONTOXIC BY INGESTION.
INHALATION HAZARDS:
INHALATION OF TOXICOLOGICALLY-SIGNIFICANT QUANTITIES OF INGREDIENTS IS
UNLIKELY WHEN THE PRODUCT IS USED IN ACCORDANCE WITH INSTRUCTIONS.
SYMPTOMS RELATED TO OVEREXPOSURE: NONE REASONABLY FORESEEABLE.
DELAYED EFFECTS FROM LONG TERM OVEREXPOSURE: NONE REASONABLY FORESEEABLE.
CARCINOGENICITY:
NO INGREDIENTS ARE CLASSIFIED AS POTENTIAL OR CONFIRMED HUMAN CARCINOGENS
BY OSHA, NTP, OR IARC.
GERM CELL MUTAGENICITY:
NO INGREDIENTS HAVE BEEN DETERMINED TO BE GERM CELL MUTAGENS.
REPRODUCTIVE TOXICITY:
NO INGREDIENTS HAVE BEEN DETERMINED TO BE DAMAGING TO FERTILITY OR TO THE
UNBORN CHILD.
ACUTE TOXICITY ESTIMATES:
NO DATA AVAILABLE VIA INGESTION, INHALATION, OR DERMAL CONTACT.
INTERACTIVE EFFECTS OF INGREDIENTS: NO DATA AVAILABLE.
| 12. ECOLOGICAL INFORMATION | |
ECOTOXICITY:
NO ECOTOXICITY DATA ARE AVAILABLE FOR THE PRODUCT OR ITS COMPONENTS.
OZONE DEPLETION POTENTIAL:
THIS PRODUCT CONTAINS NO INGREDIENTS KNOWN TO DEPLETE THE OZONE LAYER.
| 13. DISPOSAL CONSIDERATIONS | |
DO NOT DISCHARGE WASTE PRODUCT INTO SANITARY OR STORM SEWERS OR ALLOW IT TO
CONTAMINATE SOIL. CONSULT APPLICABLE FEDERAL, STATE/PROVINCIAL, AND LOCAL
REGULATIONS.
| 14. TRANSPORTATION INFORMATION | |
TRANSPORT OF THE PRODUCT IS NOT REGULATED BY USDOT, TDG (CANADA), IATA, OR
IMO.
| 15. REGULATORY INFORMATION | |
UNITED STATES REGULATORY INFORMATION:
TSCA INFORMATION:
ALL INGREDIENTS OF THIS PRODUCT ARE LISTED IN THE TSCA REGISTRY.
SARA HAZARD CLASSES: NONE APPLICABLE.
EPCRA SECTION 313 NOTIFICATION:
THIS PRODUCT CONTAINS NO INGREDIENTS IN CONCENTRATIONS >1% (>0.1% FOR
CARCINOGENS) REGULATED UNDER SECTION 313 OF THE EMERGENCY PLANNING AND
COMMUNITY RIGHT-TO-KNOW ACT OF 1986 OR 40 CFR 372.
CANADIAN REGULATORY INFORMATION:
ALL INGREDIENTS OF THIS PRODUCT ARE LISTED IN THE DOMESTIC SUBSTANCES LIST
(DSL) OR THE NONDOMESTIC SUBSTANCES LIST (NDSL).
THIS PRODUCT HAS BEEN CLASSIFIED IN ACCORDANCE WITH CANADA'S HAZARDOUS
PRODUCTS REGULATIONS (SOR/DORS/2015-17).
| 16. OTHER INFORMATION | |
HAZARDOUS MATERIALS INFORMATION SYSTEM (III) RATINGS (LEGEND):
HEALTH 0 (MINIMAL HAZARD)
FLAMMABILITY 1 (SLIGHT HAZARD)
PHYSICAL HAZARD 0 (MINIMAL HAZARD)
PPE SEE NOTE
NOTE REGARDING PPE:
OMG, INC. RECOMMENDS USE OF PROTECTIVE EYEWEAR AND SKIN PROTECTION
(PERSONAL PROTECTION INDEX "B") AS STANDARD PPE FOR THE ANTICIPATED
CONDITIONS OF USE OF THIS PRODUCT. HOWEVER, HMIS RECOMMENDS THAT ITS
RATINGS BE USED ONLY IN CONJUNCTION WITH A FULLY IMPLEMENTED HMIS PROGRAM,
AND THAT SPECIFIC PPE CODES SHOULD BE CREATED BY THE USER, WHO IS FAMILIAR
WITH THE ACTUAL CONDITIONS UNDER WHICH THE PRODUCT IS USED. WE CANNOT
ANTICIPATE EVERY CONDITION OF THE PRODUCT'S USE, AND IT IS THE USER'S
RESPONSIBILITY TO EVALUATE THE HAZARDS PERTINENT TO ITS SPECIFIC
OPERATIONS, AND TO DETERMINE THE SPECIFIC PPE REQUIRED.
NATIONAL FIRE PROTECTION ASSOC. (NFPA) RATINGS:
HEALTH 0
FLAMMABILITY 1
REACTIVITY 0
REVISION INFORMATION:
PUBLICATION DATE: 1 JUNE 2016
DATE OF PRIOR SDS: NOT APPLICABLE
DISCLAIMER:
OUR PRODUCTS AND THE INFORMATION CONTAINED HEREIN ARE SUPPLIED ON THE
CONDITION THAT THE PERSONS RECEIVING SAME WILL MAKE THEIR OWN DETERMINATION
AS TO SUITABILITY FOR THEIR PURPOSES PRIOR TO USE.
IN NO EVENT WILL OMG BE RESPONSIBLE FOR DAMAGES OF ANY NATURE WHATSOEVER
RESULTING FROM THE USE OF OR RELIANCE UPON INFORMATION FROM THIS SHEET OR
THE PRODUCTS TO WHICH THE INFORMATION REFERS. OMG DOES NOT WARRANT THE
ACCURACY OR TIMELINESS OF THE INFORMATION IN THIS SHEET AND HAS NO
LIABILITY FOR ANY ERRORS OR OMISSIONS IN THESE MATERIALS. THE INFORMATION
CONTAINED IN THIS SDS WAS PROVIDED BY A THIRD PARTY TO OMG.
THIS SHEET IS PROVIDED ON AN "AS IS" BASIS. NO REPRESENTATIONS OR
WARRANTIES, EITHER EXPRESS OR IMPLIED, OF FITNESS FOR A PARTICULAR PURPOSE
OR OF ANY OTHER NATURE ARE MADE HEREUNDER WITH RESPECT TO THE INFORMATION
PROVIDED OR THE PRODUCTS TO WHICH THE INFORMATION REFERS.