| Common Name: | SODER-WICK LEAD-FREE SD |
| Manufacturer: | CHEMTRONICS |
| SDS Revision Date: | 7/12/2019 |
| SDS Format: | GHS-US |
| Item Number(s): | 24JY84, 24JY85 |
| Manufacturer Model Number(s): |
SDS Table of Contents
Click the desired link below to jump directly to that section in the SDS.
CHEMTRONICS(R*)
SAFETY DATA SHEET
SODER-WICK(R*) LEAD-FREE SD
| SECTION 1. IDENTIFICATION |  |
GHS PRODUCT IDENTIFIER: SODER-WICK(R*) LEAD-FREE SD
PRODUCT CODE: SODER-WICK(R*) 40 SERIES
OTHER MEANS OF IDENTIFICATION:
VARIOUS CODES BASED ON SIZE AND FLUX TYPE, INCLUDING BUT NOT LIMITED TO:
40 SERIES (ALL PART NUMBERS) SOLDERING REMOVER.
PRODUCT TYPE: SOLID.
RELEVANT IDENTIFIED USES OF THE SUBSTANCE OR MIXTURE AND USES ADVISED
AGAINST: NOT APPLICABLE.
SUPPLIER'S DETAILS:
CHEMTRONICS
8125 COBB CENTER DRIVE
KENNESAW, GA 30152
TEL.: 770-424-4888 OR TOLL FREE 800-645-5244
EMERGENCY TELEPHONE NUMBER (WITH HOURS OF OPERATION):
CHEMTREC: 1-800-424-9300 OR COLLECT 703-527-3887 24/7
| SECTION 2. HAZARDS IDENTIFICATION | |
OSHA/HCS STATUS:
WHILE THIS MATERIAL IS NOT CONSIDERED HAZARDOUS BY THE OSHA HAZARD
COMMUNICATION STANDARD (29 CFR 1910.1200), THIS SDS CONTAINS VALUABLE
INFORMATION CRITICAL TO THE SAFE HANDLING AND PROPER USE OF THE PRODUCT.
THIS SDS SHOULD BE RETAINED AND AVAILABLE FOR EMPLOYEES AND OTHER USERS
OF THIS PRODUCT.
CLASSIFICATION OF THE SUBSTANCE OR MIXTURE: NOT CLASSIFIED.
PERCENTAGE OF THE MIXTURE CONSISTING OF INGREDIENT(S) OF UNKNOWN TOXICITY:
100%
GHS LABEL ELEMENTS
SIGNAL WORD: NO SIGNAL WORD.
HAZARD STATEMENTS: NO KNOWN SIGNIFICANT EFFECTS OR CRITICAL HAZARDS.
PRECAUTIONARY STATEMENTS:
PREVENTION: NOT APPLICABLE.
RESPONSE: NOT APPLICABLE.
STORAGE: NOT APPLICABLE.
DISPOSAL: NOT APPLICABLE.
HAZARDS NOT OTHERWISE CLASSIFIED: NONE KNOWN.
| SECTION 3. COMPOSITION/INFORMATION ON INGREDIENTS | |
SUBSTANCE/MIXTURE: MIXTURE
OTHER MEANS OF IDENTIFICATION:
VARIOUS CODES BASED ON SIZE AND FLUX TYPE, INCLUDING BUT NOT LIMITED TO:
40 SERIES (ALL PART NUMBERS) SOLDERING REMOVER.
ANY CONCENTRATION SHOWN AS A RANGE IS TO PROTECT CONFIDENTIALITY OR IS DUE
TO BATCH VARIATION.
THERE ARE NO INGREDIENTS PRESENT WHICH, WITHIN THE CURRENT KNOWLEDGE OF
THE SUPPLIER AND IN THE CONCENTRATIONS APPLICABLE, ARE CLASSIFIED AS
HAZARDOUS TO HEALTH OR THE ENVIRONMENT AND HENCE REQUIRE REPORTING IN
THIS SECTION. OCCUPATIONAL EXPOSURE LIMITS, IF AVAILABLE, ARE LISTED
IN SECTION 8.
| SECTION 4. FIRST AID MEASURES | |
DESCRIPTION OF NECESSARY FIRST AID MEASURES:
EYE CONTACT:
IMMEDIATELY FLUSH EYES WITH PLENTY OF WATER, OCCASIONALLY LIFTING THE UPPER
AND LOWER EYELIDS. CHECK FOR AND REMOVE ANY CONTACT LENSES. GET MEDICAL
ATTENTION IF IRRITATION OCCURS.
INHALATION:
REMOVE VICTIM TO FRESH AIR AND KEEP AT REST IN A POSITION COMFORTABLE FOR
BREATHING. GET MEDICAL ATTENTION IF SYMPTOMS OCCUR.
SKIN CONTACT:
FLUSH CONTAMINATED SKIN WITH PLENTY OF WATER. REMOVE CONTAMINATED CLOTHING
AND SHOES. GET MEDICAL ATTENTION IF SYMPTOMS OCCUR.
INGESTION:
WASH OUT MOUTH WITH WATER. REMOVE VICTIM TO FRESH AIR AND KEEP AT REST IN
A POSITION COMFORTABLE FOR BREATHING. IF MATERIAL HAS BEEN SWALLOWED AND
THE EXPOSED PERSON IS CONSCIOUS, GIVE SMALL QUANTITIES OF WATER TO DRINK.
DO NOT INDUCE VOMITING UNLESS DIRECTED TO DO SO BY MEDICAL PERSONNEL. GET
MEDICAL ATTENTION IF SYMPTOMS OCCUR.
MOST IMPORTANT SYMPTOMS/EFFECTS, ACUTE AND DELAYED:
POTENTIAL ACUTE HEALTH EFFECTS:
EYE CONTACT: SOLDERING FUMES MAY CAUSE EYE IRRITATION.
INHALATION:
SOLDERING FUMES MAY BE IRRITATING TO EYES, SKIN AND RESPIRATORY SYSTEM.
SKIN CONTACT:
MAY CAUSE SKIN IRRITATION. MAY CAUSE SENSITIZATION BY SKIN CONTACT.
INGESTION:
DO NOT INGEST. IF SWALLOWED THEN SEEK IMMEDIATE MEDICAL ASSISTANCE.
OVER-EXPOSURE SIGNS/SYMPTOMS:
EYE CONTACT:
ADVERSE SYMPTOMS MAY INCLUDE THE FOLLOWING:
IRRITATION
REDNESS
WATERING
INHALATION:
ADVERSE SYMPTOMS MAY INCLUDE THE FOLLOWING:
RESPIRATORY TRACT IRRITATION
MAY CAUSE SENSITIZATION BY INHALATION.
SKIN CONTACT:
ADVERSE SYMPTOMS MAY INCLUDE THE FOLLOWING:
IRRITATION
SENSITIZER MAY CAUSE ALLERGIC REACTIONS IN CERTAIN INDIVIDUALS.
INGESTION:
ADVERSE SYMPTOMS MAY INCLUDE THE FOLLOWING:
INGESTION SEEK MEDICAL ATTENTION.
INDICATION OF IMMEDIATE MEDICAL ATTENTION AND SPECIAL TREATMENT NEEDED,
IF NECESSARY:
NOTES TO PHYSICIAN:
TREAT SYMPTOMATICALLY. CONTACT POISON TREATMENT SPECIALIST IMMEDIATELY IF
LARGE QUANTITIES HAVE BEEN INGESTED OR INHALED.
SPECIFIC TREATMENTS: NO SPECIFIC TREATMENT.
PROTECTION OF FIRST-AIDERS:
NO ACTION SHALL BE TAKEN INVOLVING ANY PERSONAL RISK OR WITHOUT SUITABLE
TRAINING.
SEE TOXICOLOGICAL INFORMATION (SECTION 11)
| SECTION 5. FIRE-FIGHTING MEASURES | |
EXTINGUISHING MEDIA:
SUITABLE EXTINGUISHING MEDIA:
USE AN EXTINGUISHING AGENT SUITABLE FOR THE SURROUNDING FIRE.
UNSUITABLE EXTINGUISHING MEDIA: NONE KNOWN.
SPECIFIC HAZARDS ARISING FROM THE CHEMICAL:
FIRE WATER CONTAMINATED WITH THIS MATERIAL MUST BE CONTAINED AND PREVENTED
FROM BEING DISCHARGED TO ANY WATERWAY, SEWER OR DRAIN.
HAZARDOUS THERMAL DECOMPOSITION PRODUCTS:
DECOMPOSITION PRODUCTS MAY INCLUDE THE FOLLOWING MATERIALS:
METAL OXIDE/OXIDES
SPECIAL PROTECTIVE ACTIONS FOR FIRE-FIGHTERS:
PROMPTLY ISOLATE THE SCENE BY REMOVING ALL PERSONS FROM THE VICINITY OF
THE INCIDENT IF THERE IS A FIRE. NO ACTION SHALL BE TAKEN INVOLVING ANY
PERSONAL RISK OR WITHOUT SUITABLE TRAINING.
SPECIAL PROTECTIVE EQUIPMENT FOR FIRE-FIGHTERS:
FIRE-FIGHTERS SHOULD WEAR APPROPRIATE PROTECTIVE EQUIPMENT AND
SELF-CONTAINED BREATHING APPARATUS (SCBA) WITH A FULL FACE-PIECE OPERATED
IN POSITIVE PRESSURE MODE.
| SECTION 6. ACCIDENTAL RELEASE MEASURES | |
PERSONAL PRECAUTIONS, PROTECTIVE EQUIPMENT AND EMERGENCY PROCEDURES:
FOR NON-EMERGENCY PERSONNEL:
NO ACTION SHALL BE TAKEN INVOLVING ANY PERSONAL RISK OR WITHOUT SUITABLE
TRAINING. EVACUATE SURROUNDING AREAS. KEEP UNNECESSARY AND UNPROTECTED
PERSONNEL FROM ENTERING. DO NOT TOUCH OR WALK THROUGH SPILLED MATERIAL.
PUT ON APPROPRIATE PERSONAL PROTECTIVE EQUIPMENT.
FOR EMERGENCY RESPONDERS:
IF SPECIALIZED CLOTHING IS REQUIRED TO DEAL WITH THE SPILLAGE, TAKE NOTE
OF ANY INFORMATION IN SECTION 8 ON SUITABLE AND UNSUITABLE MATERIALS.
SEE ALSO THE INFORMATION IN "FOR NON-EMERGENCY PERSONNEL".
ENVIRONMENTAL PRECAUTIONS:
AVOID DISPERSAL OF SPILLED MATERIAL AND RUNOFF AND CONTACT WITH SOIL,
WATERWAYS, DRAINS AND SEWERS. INFORM THE RELEVANT AUTHORITIES IF THE
PRODUCT HAS CAUSED ENVIRONMENTAL POLLUTION (SEWERS, WATERWAYS, SOIL
OR AIR). WATER POLLUTING MATERIAL. MAY BE HARMFUL TO THE ENVIRONMENT
IF RELEASED IN LARGE QUANTITIES.
METHODS AND MATERIALS FOR CONTAINMENT AND CLEANING UP:
SMALL SPILL:
MOVE CONTAINERS FROM SPILL AREA. VACUUM OR SWEEP UP MATERIAL AND PLACE
IN A DESIGNATED, LABELED WASTE CONTAINER. DISPOSE OF VIA A LICENSED WASTE
DISPOSAL CONTRACTOR.
LARGE SPILL:
MOVE CONTAINERS FROM SPILL AREA. PREVENT ENTRY INTO SEWERS, WATER COURSES,
BASEMENTS OR CONFINED AREAS. VACUUM OR SWEEP UP MATERIAL AND PLACE IN A
DESIGNATED, LABELED WASTE CONTAINER. DISPOSE OF VIA A LICENSED WASTE
DISPOSAL CONTRACTOR. NOTE: SEE SECTION 1 FOR EMERGENCY CONTACT INFORMATION
AND SECTION 13 FOR WASTE DISPOSAL.
| SECTION 7. HANDLING AND STORAGE | |
PRECAUTIONS FOR SAFE HANDLING:
PROTECTIVE MEASURES:
PUT ON APPROPRIATE PERSONAL PROTECTIVE EQUIPMENT (SEE SECTION 8). AVOID
RELEASE TO THE ENVIRONMENT.
ADVICE ON GENERAL OCCUPATIONAL HYGIENE:
EATING, DRINKING AND SMOKING SHOULD BE PROHIBITED IN AREAS WHERE THIS
MATERIAL IS HANDLED, STORED AND PROCESSED. WORKERS SHOULD WASH HANDS AND
FACE BEFORE EATING, DRINKING AND SMOKING. REMOVE CONTAMINATED CLOTHING AND
PROTECTIVE EQUIPMENT BEFORE ENTERING EATING AREAS. SEE ALSO SECTION 8 FOR
ADDITIONAL INFORMATION ON HYGIENE MEASURES.
CONDITIONS FOR SAFE STORAGE, INCLUDING ANY INCOMPATIBILITIES:
STORE IN ACCORDANCE WITH LOCAL REGULATIONS. STORE IN ORIGINAL CONTAINER
PROTECTED FROM DIRECT SUNLIGHT IN A DRY, COOL AND WELL-VENTILATED AREA,
AWAY FROM INCOMPATIBLE MATERIALS (SEE SECTION 10) AND FOOD AND DRINK.
KEEP CONTAINER TIGHTLY CLOSED AND SEALED UNTIL READY FOR USE. CONTAINERS
THAT HAVE BEEN OPENED MUST BE CAREFULLY RESEALED AND KEPT UPRIGHT TO
PREVENT LEAKAGE. DO NOT STORE IN UNLABELED CONTAINERS. USE APPROPRIATE
CONTAINMENT TO AVOID ENVIRONMENTAL CONTAMINATION.
| SECTION 8. EXPOSURE CONTROLS/PERSONAL PROTECTION | |
CONTROL PARAMETERS:
OCCUPATIONAL EXPOSURE LIMITS: NONE.
APPROPRIATE ENGINEERING CONTROLS:
GOOD GENERAL VENTILATION SHOULD BE SUFFICIENT TO CONTROL WORKER EXPOSURE
TO AIRBORNE CONTAMINANTS.
ENVIRONMENTAL EXPOSURE CONTROLS:
EMISSIONS FROM VENTILATION OR WORK PROCESS EQUIPMENT SHOULD BE CHECKED TO
ENSURE THEY COMPLY WITH THE REQUIREMENTS OF ENVIRONMENTAL PROTECTION
LEGISLATION. IN SOME CASES, FUME SCRUBBERS, FILTERS OR ENGINEERING
MODIFICATIONS TO THE PROCESS EQUIPMENT WILL BE NECESSARY TO REDUCE
EMISSIONS TO ACCEPTABLE LEVELS.
INDIVIDUAL PROTECTION MEASURES:
HYGIENE MEASURES:
WASH HANDS, FOREARMS AND FACE THOROUGHLY AFTER HANDLING CHEMICAL PRODUCTS,
BEFORE EATING, SMOKING AND USING THE LAVATORY AND AT THE END OF THE
WORKING PERIOD. APPROPRIATE TECHNIQUES SHOULD BE USED TO REMOVE
POTENTIALLY CONTAMINATED CLOTHING. WASH CONTAMINATED CLOTHING BEFORE
REUSING. ENSURE THAT EYEWASH STATIONS AND SAFETY SHOWERS ARE CLOSE TO
THE WORKSTATION LOCATION.
EYE/FACE PROTECTION:
SAFETY EYEWEAR COMPLYING WITH AN APPROVED STANDARD SHOULD BE USED WHEN
A RISK ASSESSMENT INDICATES THIS IS NECESSARY TO AVOID EXPOSURE TO LIQUID
SPLASHES, MISTS, GASES OR DUSTS. IF CONTACT IS POSSIBLE, THE FOLLOWING
PROTECTION SHOULD BE WORN, UNLESS THE ASSESSMENT INDICATES A HIGHER
DEGREE OF PROTECTION: SAFETY GLASSES WITH SIDE-SHIELDS.
SKIN PROTECTION:
HAND PROTECTION:
CHEMICAL-RESISTANT, IMPERVIOUS GLOVES COMPLYING WITH AN APPROVED STANDARD
SHOULD BE WORN AT ALL TIMES WHEN HANDLING CHEMICAL PRODUCTS IF A RISK
ASSESSMENT INDICATES THIS IS NECESSARY.
BODY PROTECTION:
PERSONAL PROTECTIVE EQUIPMENT FOR THE BODY SHOULD BE SELECTED BASED ON THE
TASK BEING PERFORMED AND THE RISKS INVOLVED AND SHOULD BE APPROVED BY A
SPECIALIST BEFORE HANDLING THIS PRODUCT.
OTHER SKIN PROTECTION:
APPROPRIATE FOOTWEAR AND ANY ADDITIONAL SKIN PROTECTION MEASURES SHOULD BE
SELECTED BASED ON THE TASK BEING PERFORMED AND THE RISKS INVOLVED AND
SHOULD BE APPROVED BY A SPECIALIST BEFORE HANDLING THIS PRODUCT.
RESPIRATORY PROTECTION:
BASED ON THE HAZARD AND POTENTIAL FOR EXPOSURE, SELECT A RESPIRATOR THAT
MEETS THE APPROPRIATE STANDARD OR CERTIFICATION. RESPIRATORS MUST BE USED
ACCORDING TO A RESPIRATORY PROTECTION PROGRAM TO ENSURE PROPER FITTING,
TRAINING, AND OTHER IMPORTANT ASPECTS OF USE.
| SECTION 9. PHYSICAL AND CHEMICAL PROPERTIES | |
APPEARANCE:
PHYSICAL STATE: SOLID.
COLOR: COPPER.
ODOR: WOOD ROSIN
ODOR THRESHOLD: NOT AVAILABLE.
PH: NOT AVAILABLE.
MELTING POINT: NOT AVAILABLE.
BOILING POINT: NOT AVAILABLE.
FLASH POINT: NOT AVAILABLE.
EVAPORATION RATE: NOT AVAILABLE.
FLAMMABILITY (SOLID, GAS): NOT AVAILABLE.
LOWER AND UPPER EXPLOSIVE (FLAMMABLE) LIMITS: NOT AVAILABLE.
VAPOR PRESSURE: NOT AVAILABLE.
VAPOR DENSITY: NOT AVAILABLE.
RELATIVE DENSITY: NOT AVAILABLE.
SOLUBILITY: NOT AVAILABLE.
SOLUBILITY IN WATER: NOT AVAILABLE.
PARTITION COEFFICIENT N-OCTANOL/WATER: NOT AVAILABLE.
AUTO-IGNITION TEMPERATURE: NOT AVAILABLE.
DECOMPOSITION TEMPERATURE: NOT AVAILABLE.
VISCOSITY: NOT AVAILABLE.
FLOW TIME (ISO 2431): NOT AVAILABLE.
| SECTION 10. STABILITY AND REACTIVITY | |
REACTIVITY:
NO SPECIFIC TEST DATA RELATED TO REACTIVITY AVAILABLE FOR THIS PRODUCT
OR ITS INGREDIENTS.
CHEMICAL STABILITY: THE PRODUCT IS STABLE.
POSSIBILITY OF HAZARDOUS REACTIONS:
UNDER NORMAL CONDITIONS OF STORAGE AND USE, HAZARDOUS REACTIONS WILL NOT
OCCUR.
CONDITIONS TO AVOID: NO SPECIFIC DATA.
INCOMPATIBLE MATERIALS: NO SPECIFIC DATA.
HAZARDOUS DECOMPOSITION PRODUCTS:
UNDER NORMAL CONDITIONS OF STORAGE AND USE, HAZARDOUS DECOMPOSITION
PRODUCTS SHOULD NOT BE PRODUCED.
| SECTION 11. TOXICOLOGICAL INFORMATION | |
INFORMATION ON TOXICOLOGICAL EFFECTS:
ACUTE TOXICITY: NOT AVAILABLE.
IRRITATION/CORROSION: NOT AVAILABLE.
SENSITIZATION: NOT AVAILABLE.
MUTAGENICITY: NOT AVAILABLE.
CARCINOGENICITY: NOT AVAILABLE.
REPRODUCTIVE TOXICITY: NOT AVAILABLE.
TERATOGENICITY: NOT AVAILABLE.
SPECIFIC TARGET ORGAN TOXICITY (SINGLE EXPOSURE): NOT AVAILABLE.
SPECIFIC TARGET ORGAN TOXICITY (REPEATED EXPOSURE): NOT AVAILABLE.
ASPIRATION HAZARD: NOT AVAILABLE.
INFORMATION ON THE LIKELY ROUTES OF EXPOSURE: NOT AVAILABLE.
POTENTIAL ACUTE HEALTH EFFECTS:
EYE CONTACT: SOLDERING FUMES MAY CAUSE EYE IRRITATION.
INHALATION:
SOLDERING FUMES MAY BE IRRITATING TO EYES, SKIN AND RESPIRATORY SYSTEM.
SKIN CONTACT:
MAY CAUSE SKIN IRRITATION. MAY CAUSE SENSITIZATION BY SKIN CONTACT.
INGESTION:
DO NOT INGEST. IF SWALLOWED THEN SEEK IMMEDIATE MEDICAL ASSISTANCE.
SYMPTOMS RELATED TO THE PHYSICAL, CHEMICAL AND TOXICOLOGICAL
CHARACTERISTICS:
EYE CONTACT:
ADVERSE SYMPTOMS MAY INCLUDE THE FOLLOWING:
IRRITATION
REDNESS
WATERING
INHALATION:
ADVERSE SYMPTOMS MAY INCLUDE THE FOLLOWING:
RESPIRATORY TRACT IRRITATION
MAY CAUSE SENSITIZATION BY INHALATION.
SKIN CONTACT:
ADVERSE SYMPTOMS MAY INCLUDE THE FOLLOWING:
IRRITATION
SENSITIZER MAY CAUSE ALLERGIC REACTIONS IN CERTAIN INDIVIDUALS.
INGESTION:
ADVERSE SYMPTOMS MAY INCLUDE THE FOLLOWING:
INGESTION SEEK MEDICAL ATTENTION.
DELAYED AND IMMEDIATE EFFECTS AND ALSO CHRONIC EFFECTS FROM SHORT AND
LONG TERM EXPOSURE:
SHORT TERM EXPOSURE:
POTENTIAL IMMEDIATE EFFECTS: NOT AVAILABLE.
POTENTIAL DELAYED EFFECTS: NOT AVAILABLE.
LONG TERM EXPOSURE:
POTENTIAL IMMEDIATE EFFECTS: NOT AVAILABLE.
POTENTIAL DELAYED EFFECTS: NOT AVAILABLE.
POTENTIAL CHRONIC HEALTH EFFECTS: NOT AVAILABLE.
GENERAL: NO KNOWN SIGNIFICANT EFFECTS OR CRITICAL HAZARDS.
CARCINOGENICITY: NO KNOWN SIGNIFICANT EFFECTS OR CRITICAL HAZARDS.
MUTAGENICITY: NO KNOWN SIGNIFICANT EFFECTS OR CRITICAL HAZARDS.
TERATOGENICITY: NO KNOWN SIGNIFICANT EFFECTS OR CRITICAL HAZARDS.
DEVELOPMENTAL EFFECTS: NO KNOWN SIGNIFICANT EFFECTS OR CRITICAL HAZARDS.
FERTILITY EFFECTS: NO KNOWN SIGNIFICANT EFFECTS OR CRITICAL HAZARDS.
NUMERICAL MEASURES OF TOXICITY:
ACUTE TOXICITY ESTIMATES: NOT AVAILABLE.
| SECTION 12. ECOLOGICAL INFORMATION | |
TOXICITY: NOT AVAILABLE.
PERSISTENCE AND DEGRADABILITY: NOT AVAILABLE.
BIOACCUMULATIVE POTENTIAL: NOT AVAILABLE.
MOBILITY IN SOIL:
SOIL/WATER PARTITION COEFFICIENT (KOC): NOT AVAILABLE.
OTHER ADVERSE EFFECTS: NO KNOWN SIGNIFICANT EFFECTS OR CRITICAL HAZARDS.
| SECTION 13. DISPOSAL CONSIDERATIONS | |
DISPOSAL METHODS:
THE GENERATION OF WASTE SHOULD BE AVOIDED OR MINIMIZED WHEREVER POSSIBLE.
DISPOSAL OF THIS PRODUCT, SOLUTIONS AND ANY BY-PRODUCTS SHOULD AT ALL
TIMES COMPLY WITH THE REQUIREMENTS OF ENVIRONMENTAL PROTECTION AND WASTE
DISPOSAL LEGISLATION AND ANY REGIONAL LOCAL AUTHORITY REQUIREMENTS.
DISPOSE OF SURPLUS AND NON-RECYCLABLE PRODUCTS VIA A LICENSED WASTE
DISPOSAL CONTRACTOR. WASTE SHOULD NOT BE DISPOSED OF UNTREATED TO THE
SEWER UNLESS FULLY COMPLIANT WITH THE REQUIREMENTS OF ALL AUTHORITIES
WITH JURISDICTION. WASTE PACKAGING SHOULD BE RECYCLED. INCINERATION OR
LANDFILL SHOULD ONLY BE CONSIDERED WHEN RECYCLING IS NOT FEASIBLE. THIS
MATERIAL AND ITS CONTAINER MUST BE DISPOSED OF IN A SAFE WAY. EMPTY
CONTAINERS OR LINERS MAY RETAIN SOME PRODUCT RESIDUES. AVOID DISPERSAL
OF SPILLED MATERIAL AND RUNOFF AND CONTACT WITH SOIL, WATERWAYS, DRAINS
AND SEWERS.
| SECTION 14. TRANSPORT INFORMATION | |
DOT TDG MEXICO
CLASSIFICATION CLASSIFICATION CLASSIFICATION
UN NUMBER NOT REGULATED. NOT REGULATED. NOT REGULATED.
UN PROPER WIRE WIRE WIRE
SHIPPING NAME
TRANSPORT HAZARD
CLASS(ES)
PACKING GROUP
ENVIRONMENTAL NO. NO. NO.
HAZARDS
ADDITIONAL NOT REGULATED. NOT REGULATED. NOT REGULATED.
INFORMATION
ADR/RID IMDG IATA
UN NUMBER NOT REGULATED. NOT REGULATED. NOT REGULATED.
UN PROPER WIRE WIRE WIRE
SHIPPING NAME
TRANSPORT HAZARD
CLASS(ES)
PACKING GROUP
ENVIRONMENTAL
HAZARDS
ADDITIONAL NOT REGULATED. NOT REGULATED. NOT REGULATED.
INFORMATION
SPECIAL PRECAUTIONS FOR USER:
TRANSPORT WITHIN USER'S PREMISES: ALWAYS TRANSPORT IN CLOSED CONTAINERS
THAT ARE UPRIGHT AND SECURE. ENSURE THAT PERSONS TRANSPORTING THE PRODUCT
KNOW WHAT TO DO IN THE EVENT OF AN ACCIDENT OR SPILLAGE.
TRANSPORT IN BULK ACCORDING TO ANNEX II OF MARPOL AND THE IBC CODE:
NOT AVAILABLE.
| SECTION 15. REGULATORY INFORMATION | |
U.S. FEDERAL REGULATIONS:
TSCA 8(A) CDR EXEMPT/PARTIAL EXEMPTION: NOT DETERMINED
UNITED STATES INVENTORY (TSCA 8B): ALL COMPONENTS ARE LISTED OR EXEMPTED.
CLEAN WATER ACT (CWA) 307: COPPER
CLEAN AIR ACT SECTION 112 (B) HAZARDOUS AIR POLLUTANTS (HAPS): LISTED
CLEAN AIR ACT SECTION 602 CLASS I SUBSTANCES: NOT LISTED
CLEAN AIR ACT SECTION 602 CLASS II SUBSTANCES: NOT LISTED
DEA LIST I CHEMICALS (PRECURSOR CHEMICALS): NOT LISTED
DEA LIST II CHEMICALS (ESSENTIAL CHEMICALS): NOT LISTED
SARA 302/304:
COMPOSITION/INFORMATION ON INGREDIENTS: NO PRODUCTS WERE FOUND.
SARA 304 RQ: NOT APPLICABLE.
SARA 311/312:
CLASSIFICATION: NOT APPLICABLE.
COMPOSITION/INFORMATION ON INGREDIENTS: NO PRODUCTS WERE FOUND.
SARA 313:
PRODUCT NAME CAS NUMBER %
FORM R - REPORTING REQUIREMENTS:
COPPER 7440-50-8 >/=90
SUPPLIER NOTIFICATION:
COPPER 7440-50-8 >/=90
SARA 313 NOTIFICATIONS MUST NOT BE DETACHED FROM THE SDS AND ANY COPYING
AND REDISTRIBUTION OF THE SDS SHALL INCLUDE COPYING AND REDISTRIBUTION
OF THE NOTICE ATTACHED TO COPIES OF THE SDS SUBSEQUENTLY REDISTRIBUTED.
STATE REGULATIONS:
MASSACHUSETTS:
THE FOLLOWING COMPONENTS ARE LISTED: COPPER
NEW YORK:
THE FOLLOWING COMPONENTS ARE LISTED: COPPER
NEW JERSEY:
THE FOLLOWING COMPONENTS ARE LISTED: COPPER
PENNSYLVANIA:
THE FOLLOWING COMPONENTS ARE LISTED:
COPPER FUME; ROSIN CORE SOLDER PYROLYSIS PRODUCTS
INTERNATIONAL REGULATIONS:
CHEMICAL WEAPON CONVENTION LIST SCHEDULES I, II & III CHEMICALS:
NOT LISTED.
MONTREAL PROTOCOL (ANNEXES A, B, C, E): NOT LISTED.
STOCKHOLM CONVENTION ON PERSISTENT ORGANIC POLLUTANTS: NOT LISTED.
ROTTERDAM CONVENTION ON PRIOR INFORMED CONSENT (PIC): NOT LISTED.
UNECE AARHUS PROTOCOL ON POPS AND HEAVY METALS: NOT LISTED.
INTERNATIONAL LISTS:
NATIONAL INVENTORY:
AUSTRALIA: ALL COMPONENTS ARE LISTED OR EXEMPTED.
CANADA: ALL COMPONENTS ARE LISTED OR EXEMPTED.
CHINA: ALL COMPONENTS ARE LISTED OR EXEMPTED.
EUROPE: ALL COMPONENTS ARE LISTED OR EXEMPTED.
JAPAN:
JAPAN INVENTORY (ENCS): NOT DETERMINED.
JAPAN INVENTORY (ISHL): NOT DETERMINED.
MALAYSIA: ALL COMPONENTS ARE LISTED OR EXEMPTED.
NEW ZEALAND: ALL COMPONENTS ARE LISTED OR EXEMPTED.
PHILIPPINES: ALL COMPONENTS ARE LISTED OR EXEMPTED.
REPUBLIC OF KOREA: ALL COMPONENTS ARE LISTED OR EXEMPTED.
TAIWAN: ALL COMPONENTS ARE LISTED OR EXEMPTED.
TURKEY: ALL COMPONENTS ARE LISTED OR EXEMPTED.
| SECTION 16. OTHER INFORMATION | |
HAZARDOUS MATERIAL INFORMATION SYSTEM (U.S.A.):
HEALTH 1*
FLAMMABILITY 0
PHYSICAL HAZARDS 0
CAUTION:
HMIS(R*) RATINGS ARE BASED ON A 0-4 RATING SCALE, WITH 0 REPRESENTING
MINIMAL HAZARDS OR RISKS, AND 4 REPRESENTING SIGNIFICANT HAZARDS OR RISKS
ALTHOUGH HMIS(R*) RATINGS ARE NOT REQUIRED ON SDSS UNDER 29 CFR 1910.1200,
THE PREPARER MAY CHOOSE TO PROVIDE THEM. HMIS(R*) RATINGS ARE TO BE USED
WITH A FULLY IMPLEMENTED HMIS(R*) PROGRAM. HMIS(R*) IS A REGISTERED MARK
OF THE NATIONAL PAINT & COATINGS ASSOCIATION (NPCA). HMIS(R*) MATERIALS
MAY BE PURCHASED EXCLUSIVELY FROM J. J. KELLER (800) 327-6868.
THE CUSTOMER IS RESPONSIBLE FOR DETERMINING THE PPE CODE FOR THIS
MATERIAL.
NATIONAL FIRE PROTECTION ASSOCIATION (U.S.A.):
HEALTH 1
FLAMMABILITY 0
INSTABILITY/REACTIVITY 0
SPECIAL
REPRINTED WITH PERMISSION FROM NFPA 704-2001, IDENTIFICATION OF THE
HAZARDS OF MATERIALS FOR EMERGENCY RESPONSE COPYRIGHT (C)1997, NATIONAL
FIRE PROTECTION ASSOCIATION, QUINCY, MA 02269. THIS REPRINTED MATERIAL
IS NOT THE COMPLETE AND OFFICIAL POSITION OF THE NATIONAL FIRE PROTECTION
ASSOCIATION, ON THE REFERENCED SUBJECT WHICH IS REPRESENTED ONLY BY THE
STANDARD IN ITS ENTIRETY.
COPYRIGHT (C)2001, NATIONAL FIRE PROTECTION ASSOCIATION, QUINCY, MA 02269.
THIS WARNING SYSTEM IS INTENDED TO BE INTERPRETED AND APPLIED ONLY BY
PROPERLY TRAINED INDIVIDUALS TO IDENTIFY FIRE, HEALTH AND REACTIVITY
HAZARDS OF CHEMICALS. THE USER IS REFERRED TO CERTAIN LIMITED NUMBER OF
CHEMICALS WITH RECOMMENDED CLASSIFICATIONS IN NFPA 49 AND NFPA 325, WHICH
WOULD BE USED AS A GUIDELINE ONLY. WHETHER THE CHEMICALS ARE CLASSIFIED BY
NFPA OR NOT, ANYONE USING THE 704 SYSTEMS TO CLASSIFY CHEMICALS DOES SO
AT THEIR OWN RISK.
PROCEDURE USED TO DERIVE THE CLASSIFICATION:
CLASSIFICATION JUSTIFICATION
NOT CLASSIFIED.
HISTORY:
DATE OF PRINTING: 7/12/2019
DATE OF ISSUE/DATE OF REVISION: 7/12/2019
DATE OF PREVIOUS ISSUE: 7/12/2019
VERSION: 2
KEY TO ABBREVIATIONS:
ATE: ACUTE TOXICITY ESTIMATE
BCF: BIOCONCENTRATION FACTOR
GHS:
GLOBALLY HARMONIZED SYSTEM OF CLASSIFICATION AND LABELLING OF CHEMICALS
IATA: INTERNATIONAL AIR TRANSPORT ASSOCIATION
IBC: INTERMEDIATE BULK CONTAINER
IMDG: INTERNATIONAL MARITIME DANGEROUS GOODS
LOGPOW: LOGARITHM OF THE OCTANOL/WATER PARTITION COEFFICIENT
MARPOL:
INTERNATIONAL CONVENTION FOR THE PREVENTION OF POLLUTION FROM SHIPS,
1973 AS MODIFIED BY THE PROTOCOL OF 1978. ("MARPOL" = MARINE POLLUTION)
UN: UNITED NATIONS
REFERENCES: NOT AVAILABLE.
| INDICATES INFORMATION THAT HAS CHANGED FROM PREVIOUSLY ISSUED VERSION.
NOTICE TO READER:
TO THE BEST OF OUR KNOWLEDGE, THE INFORMATION CONTAINED HEREIN IS
ACCURATE. HOWEVER, NEITHER THE ABOVE-NAMED SUPPLIER, NOR ANY OF ITS
SUBSIDIARIES, ASSUMES ANY LIABILITY WHATSOEVER FOR THE ACCURACY OR
COMPLETENESS OF THE INFORMATION CONTAINED HEREIN.
FINAL DETERMINATION OF SUITABILITY OF ANY MATERIAL IS THE SOLE
RESPONSIBILITY OF THE USER. ALL MATERIALS MAY PRESENT UNKNOWN HAZARDS AND
SHOULD BE USED WITH CAUTION. ALTHOUGH CERTAIN HAZARDS ARE DESCRIBED HEREIN,
WE CANNOT GUARANTEE THAT THESE ARE THE ONLY HAZARDS THAT EXIST.