| Common Name: | SCOTCH-WELD EPOXY ADHESIVE DP100NS TRANSLUCENT |
| Manufacturer: | 3M |
| SDS Revision Date: | 11/7/2019 |
| SDS Format: | GHS-US |
| Item Number(s): | 2JBP5, 489X75 |
| Manufacturer Model Number(s): |
SDS Table of Contents
Click the desired link below to jump directly to that section in the SDS.
3M(TM) SCOTCH-WELD(TM) EPOXY ADHESIVE DP100NS TRANSLUCENT
11/07/19
3M
SAFETY DATA SHEET
COPYRIGHT, 2019, 3M COMPANY.
ALL RIGHTS RESERVED. COPYING AND/OR DOWNLOADING OF THIS INFORMATION FOR
THE PURPOSE OF PROPERLY UTILIZING 3M PRODUCTS IS ALLOWED PROVIDED THAT:
(1) THE INFORMATION IS COPIED IN FULL WITH NO CHANGES UNLESS PRIOR WRITTEN
AGREEMENT IS OBTAINED FROM 3M, AND
(2) NEITHER THE COPY NOR THE ORIGINAL IS RESOLD OR OTHERWISE DISTRIBUTED
WITH THE INTENTION OF EARNING A PROFIT THEREON.
DOCUMENT GROUP: 11-2403-1
VERSION NUMBER: 17.00
ISSUE DATE: 11/07/19
SUPERCEDES DATE: 04/03/19
PRODUCT IDENTIFIER:
3M(TM) SCOTCH-WELD(TM) EPOXY ADHESIVE DP100NS TRANSLUCENT
ID NUMBER(S):
62-3265-1430-4, 62-3265-1431-2, 62-3265-1435-3, 62-3265-1436-1,
62-3265-3530-9, 62-3265-3830-3
7100076484, 7010367273, 7100082554, 7100014024, 7100148744, 7010412191
RECOMMENDED USE: STRUCTURAL ADHESIVE
SUPPLIER'S DETAILS:
MANUFACTURER: 3M
DIVISION: INDUSTRIAL ADHESIVES AND TAPES DIVISION
ADDRESS:
3M CENTER
ST. PAUL, MN 55144-1000
USA
TELEPHONE: 1-888-3M HELPS (1-888-364-3577)
EMERGENCY TELEPHONE NUMBER: 1-800-364-3577 OR (651) 737-6501 (24 HOURS)
THIS PRODUCT IS A KIT OR A MULTIPART PRODUCT WHICH CONSISTS OF MULTIPLE,
INDEPENDENTLY PACKAGED COMPONENTS. A SAFETY DATA SHEET (SDS), ARTICLE
INFORMATION SHEET (AIS), OR ARTICLE INFORMATION LETTER (AIL) FOR EACH OF
THESE COMPONENTS IS INCLUDED. PLEASE DO NOT SEPARATE THE COMPONENT
DOCUMENTS FROM THIS COVER SHEET.
THE DOCUMENT NUMBERS FOR COMPONENTS OF THIS PRODUCT ARE:
11-2401-5, 11-2402-3
DISCLAIMER:
THE INFORMATION IN THIS SAFETY DATA SHEET (SDS) IS BELIEVED TO BE CORRECT
AS OF THE DATE ISSUED. 3M MAKES NO WARRANTIES, EXPRESSED OR IMPLIED,
INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE OR COURSE OF PERFORMANCE OR USAGE OF
TRADE. USER IS RESPONSIBLE FOR DETERMINING WHETHER THE 3M PRODUCT IS FIT
FOR A PARTICULAR PURPOSE AND SUITABLE FOR USER'S METHOD OF USE OR
APPLICATION. GIVEN THE VARIETY OF FACTORS THAT CAN AFFECT THE USE AND
APPLICATION OF A 3M PRODUCT, SOME OF WHICH ARE UNIQUELY WITHIN THE USER'S
KNOWLEDGE AND CONTROL, IT IS ESSENTIAL THAT THE USER EVALUATE THE 3M
PRODUCT TO DETERMINE WHETHER IT IS FIT FOR A PARTICULAR PURPOSE AND
SUITABLE FOR USER'S METHOD OF USE OR APPLICATION.
3M PROVIDES INFORMATION IN ELECTRONIC FORM AS A SERVICE TO ITS CUSTOMERS.
DUE TO THE REMOTE POSSIBILITY THAT ELECTRONIC TRANSFER MAY HAVE RESULTED
IN ERRORS, OMISSIONS OR ALTERATIONS IN THIS INFORMATION, 3M MAKES NO
REPRESENTATIONS AS TO ITS COMPLETENESS OR ACCURACY. IN ADDITION,
INFORMATION OBTAINED FROM A DATABASE MAY NOT BE AS CURRENT AS THE
INFORMATION IN THE SDS AVAILABLE DIRECTLY FROM 3M.
3M USA SDSS ARE AVAILABLE AT WWW.3M.COM
3M(TM) SCOTCH-WELD(TM) EPOXY ADHESIVE DP100NS TRANSLUCENT, PART B
11/07/19
3M
SAFETY DATA SHEET
COPYRIGHT, 2019, 3M COMPANY.
ALL RIGHTS RESERVED. COPYING AND/OR DOWNLOADING OF THIS INFORMATION FOR
THE PURPOSE OF PROPERLY UTILIZING 3M PRODUCTS IS ALLOWED PROVIDED THAT:
(1) THE INFORMATION IS COPIED IN FULL WITH NO CHANGES UNLESS PRIOR WRITTEN
AGREEMENT IS OBTAINED FROM 3M, AND
(2) NEITHER THE COPY NOR THE ORIGINAL IS RESOLD OR OTHERWISE DISTRIBUTED
WITH THE INTENTION OF EARNING A PROFIT THEREON.
DOCUMENT GROUP: 11-2401-5
VERSION NUMBER: 19.00
ISSUE DATE: 11/07/19
SUPERCEDES DATE: 04/03/19
| SECTION 1: IDENTIFICATION |  |
1.1. PRODUCT IDENTIFIER:
3M(TM) SCOTCH-WELD(TM) EPOXY ADHESIVE DP100NS TRANSLUCENT, PART B
PRODUCT IDENTIFICATION NUMBERS: DP-100
1.2. RECOMMENDED USE AND RESTRICTIONS ON USE:
RECOMMENDED USE: STRUCTURAL ADHESIVE
1.3. SUPPLIER'S DETAILS:
MANUFACTURER: 3M
DIVISION: INDUSTRIAL ADHESIVES AND TAPES DIVISION
ADDRESS:
3M CENTER
ST. PAUL, MN 55144-1000
USA
TELEPHONE: 1-888-3M HELPS (1-888-364-3577)
1.4. EMERGENCY TELEPHONE NUMBER:
1-800-364-3577 OR (651) 737-6501 (24 HOURS)
| SECTION 2: HAZARD IDENTIFICATION | |
2.1. HAZARD CLASSIFICATION:
SERIOUS EYE DAMAGE/IRRITATION: CATEGORY 1.
SKIN CORROSION/IRRITATION: CATEGORY 2.
SKIN SENSITIZER: CATEGORY 1.
REPRODUCTIVE TOXICITY: CATEGORY 1B.
GERM CELL MUTAGENICITY: CATEGORY 2.
2.2. LABEL ELEMENTS:
SIGNAL WORD: DANGER
SYMBOLS:
CORROSION
EXCLAMATION MARK
HEALTH HAZARD
PICTOGRAMS:
CORROSION
EXCLAMATION MARK
HEALTH HAZARD
HAZARD STATEMENTS:
CAUSES SERIOUS EYE DAMAGE.
CAUSES SKIN IRRITATION.
MAY CAUSE AN ALLERGIC SKIN REACTION.
MAY DAMAGE FERTILITY OR THE UNBORN CHILD.
SUSPECTED OF CAUSING GENETIC DEFECTS.
PRECAUTIONARY STATEMENTS:
PREVENTION:
OBTAIN SPECIAL INSTRUCTIONS BEFORE USE.
DO NOT HANDLE UNTIL ALL SAFETY PRECAUTIONS HAVE BEEN READ AND UNDERSTOOD.
AVOID BREATHING DUST/FUME/GAS/MIST/VAPORS/SPRAY.
WEAR PROTECTIVE GLOVES AND EYE/FACE PROTECTION.
WASH THOROUGHLY AFTER HANDLING.
CONTAMINATED WORK CLOTHING MUST NOT BE ALLOWED OUT OF THE WORKPLACE.
RESPONSE:
IF IN EYES:
RINSE CAUTIOUSLY WITH WATER FOR SEVERAL MINUTES. REMOVE CONTACT LENSES, IF
PRESENT AND EASY TO DO.
CONTINUE RINSING.
IF ON SKIN: WASH WITH PLENTY OF SOAP AND WATER.
IMMEDIATELY CALL A POISON CENTER OR DOCTOR/PHYSICIAN.
IF SKIN IRRITATION OR RASH OCCURS: GET MEDICAL ADVICE/ATTENTION.
TAKE OFF CONTAMINATED CLOTHING AND WASH IT BEFORE REUSE.
IF EXPOSED OR CONCERNED: GET MEDICAL ADVICE/ATTENTION.
STORAGE: STORE LOCKED UP.
DISPOSAL:
DISPOSE OF CONTENTS/CONTAINER IN ACCORDANCE WITH APPLICABLE
LOCAL/REGIONAL/NATIONAL/INTERNATIONAL REGULATIONS.
| SECTION 3: COMPOSITION/INFORMATION ON INGREDIENTS | |
INGREDIENT C.A.S. NO. % BY WT
EPOXY RESIN 1 25068-38-6 85 - 94 TRADE SECRET *
EPOXY RESIN 2 30499-70-8 5 - 10 TRADE SECRET *
AMORPHOUS SILICA 67762-90-7 1 - 5 TRADE SECRET *
*THE SPECIFIC CHEMICAL IDENTITY AND/OR EXACT PERCENTAGE (CONCENTRATION) OF
THIS COMPOSITION HAS BEEN WITHHELD AS A TRADE SECRET.
| SECTION 4: FIRST AID MEASURES | |
4.1. DESCRIPTION OF FIRST AID MEASURES:
INHALATION:
REMOVE PERSON TO FRESH AIR. IF YOU FEEL UNWELL, GET MEDICAL ATTENTION.
SKIN CONTACT:
IMMEDIATELY WASH WITH SOAP AND WATER. REMOVE CONTAMINATED CLOTHING AND WASH
BEFORE REUSE. IF SIGNS/SYMPTOMS DEVELOP, GET MEDICAL ATTENTION.
EYE CONTACT:
IMMEDIATELY FLUSH WITH LARGE AMOUNTS OF WATER FOR AT LEAST 15 MINUTES.
REMOVE CONTACT LENSES IF EASY TO DO. CONTINUE RINSING. IMMEDIATELY GET
MEDICAL ATTENTION.
IF SWALLOWED:
RINSE MOUTH. IF YOU FEEL UNWELL, GET MEDICAL ATTENTION.
4.2. MOST IMPORTANT SYMPTOMS AND EFFECTS, BOTH ACUTE AND DELAYED:
SEE SECTION 11.1. INFORMATION ON TOXICOLOGICAL EFFECTS.
4.3. INDICATION OF ANY IMMEDIATE MEDICAL ATTENTION AND SPECIAL TREATMENT
REQUIRED: NOT APPLICABLE
| SECTION 5: FIRE-FIGHTING MEASURES | |
5.1. SUITABLE EXTINGUISHING MEDIA:
IN CASE OF FIRE:
USE A FIRE FIGHTING AGENT SUITABLE FOR ORDINARY COMBUSTIBLE MATERIAL SUCH
AS WATER OR FOAM TO EXTINGUISH.
5.2. SPECIAL HAZARDS ARISING FROM THE SUBSTANCE OR MIXTURE:
NONE INHERENT IN THIS PRODUCT.
HAZARDOUS DECOMPOSITION OR BY-PRODUCTS:
SUBSTANCE CONDITION
ALDEHYDES DURING COMBUSTION
CARBON MONOXIDE DURING COMBUSTION
CARBON DIOXIDE DURING COMBUSTION
HYDROGEN CHLORIDE DURING COMBUSTION
KETONES DURING COMBUSTION
5.3. SPECIAL PROTECTIVE ACTIONS FOR FIRE-FIGHTERS:
WEAR FULL PROTECTIVE CLOTHING, INCLUDING HELMET, SELF-CONTAINED, POSITIVE
PRESSURE OR PRESSURE DEMAND BREATHING APPARATUS, BUNKER COAT AND PANTS,
BANDS AROUND ARMS, WAIST AND LEGS, FACE MASK, AND PROTECTIVE COVERING FOR
EXPOSED AREAS OF THE HEAD.
| SECTION 6: ACCIDENTAL RELEASE MEASURES | |
6.1. PERSONAL PRECAUTIONS, PROTECTIVE EQUIPMENT AND EMERGENCY PROCEDURES:
EVACUATE AREA. VENTILATE THE AREA WITH FRESH AIR. FOR LARGE SPILL, OR
SPILLS IN CONFINED SPACES, PROVIDE MECHANICAL VENTILATION TO DISPERSE OR
EXHAUST VAPORS, IN ACCORDANCE WITH GOOD INDUSTRIAL HYGIENE PRACTICE. REFER
TO OTHER SECTIONS OF THIS SDS FOR INFORMATION REGARDING PHYSICAL AND HEALTH
HAZARDS, RESPIRATORY PROTECTION, VENTILATION, AND PERSONAL PROTECTIVE
EQUIPMENT.
6.2. ENVIRONMENTAL PRECAUTIONS:
AVOID RELEASE TO THE ENVIRONMENT. FOR LARGER SPILLS, COVER DRAINS AND BUILD
DIKES TO PREVENT ENTRY INTO SEWER SYSTEMS OR BODIES OF WATER.
6.3. METHODS AND MATERIAL FOR CONTAINMENT AND CLEANING UP:
CONTAIN SPILL. WORKING FROM AROUND THE EDGES OF THE SPILL INWARD, COVER
WITH BENTONITE, VERMICULITE, OR COMMERCIALLY AVAILABLE INORGANIC ABSORBENT
MATERIAL. MIX IN SUFFICIENT ABSORBENT UNTIL IT APPEARS DRY. REMEMBER,
ADDING AN ABSORBENT MATERIAL DOES NOT REMOVE A PHYSICAL, HEALTH, OR
ENVIRONMENTAL HAZARD. COLLECT AS MUCH OF THE SPILLED MATERIAL AS POSSIBLE.
PLACE IN A CLOSED CONTAINER APPROVED FOR TRANSPORTATION BY APPROPRIATE
AUTHORITIES. CLEAN UP RESIDUE WITH AN APPROPRIATE SOLVENT SELECTED BY A
QUALIFIED AND AUTHORIZED PERSON. VENTILATE THE AREA WITH FRESH AIR. READ
AND FOLLOW SAFETY PRECAUTIONS ON THE SOLVENT LABEL AND SDS. SEAL THE
CONTAINER. DISPOSE OF COLLECTED MATERIAL AS SOON AS POSSIBLE IN ACCORDANCE
WITH APPLICABLE LOCAL/REGIONAL/NATIONAL/INTERNATIONAL REGULATIONS.
| SECTION 7: HANDLING AND STORAGE | |
7.1. PRECAUTIONS FOR SAFE HANDLING:
DO NOT HANDLE UNTIL ALL SAFETY PRECAUTIONS HAVE BEEN READ AND UNDERSTOOD.
DO NOT BREATHE DUST/FUME/GAS/MIST/VAPORS/SPRAY. DO NOT GET IN EYES, ON
SKIN, OR ON CLOTHING. DO NOT EAT, DRINK OR SMOKE WHEN USING THIS PRODUCT.
WASH THOROUGHLY AFTER HANDLING. CONTAMINATED WORK CLOTHING SHOULD NOT BE
ALLOWED OUT OF THE WORKPLACE. AVOID RELEASE TO THE ENVIRONMENT. WASH
CONTAMINATED CLOTHING BEFORE REUSE. AVOID CONTACT WITH OXIDIZING AGENTS
(EG. CHLORINE, CHROMIC ACID ETC.) USE PERSONAL PROTECTIVE EQUIPMENT
(GLOVES, RESPIRATORS, ETC.) AS REQUIRED.
7.2. CONDITIONS FOR SAFE STORAGE INCLUDING ANY INCOMPATIBILITIES:
STORE AWAY FROM ACIDS. STORE AWAY FROM OXIDIZING AGENTS.
| SECTION 8: EXPOSURE CONTROLS/PERSONAL PROTECTION | |
8.1. CONTROL PARAMETERS:
OCCUPATIONAL EXPOSURE LIMITS:
IF A COMPONENT IS DISCLOSED IN SECTION 3 BUT DOES NOT APPEAR IN THE TABLE
BELOW, AN OCCUPATIONAL EXPOSURE LIMIT IS NOT AVAILABLE FOR THE COMPONENT.
INGREDIENT C.A.S. NO. AGENCY LIMIT TYPE ADDITIONAL
COMMENTS
SILICA, AMORPHOUS 67762-90-7 OSHA TWA CONCENTRATION:
0.8 MG/M3;
TWA: 20 MILLIONS OF
PARTICLES/CU. FT.
ACGIH: AMERICAN CONFERENCE OF GOVERNMENTAL INDUSTRIAL HYGIENISTS
AIHA: AMERICAN INDUSTRIAL HYGIENE ASSOCIATION
CMRG: CHEMICAL MANUFACTURER'S RECOMMENDED GUIDELINES
OSHA:
UNITED STATES DEPARTMENT OF LABOR - OCCUPATIONAL SAFETY AND HEALTH
ADMINISTRATION
TWA: TIME-WEIGHTED-AVERAGE
STEL: SHORT TERM EXPOSURE LIMIT
CEIL: CEILING
8.2. EXPOSURE CONTROLS:
8.2.1. ENGINEERING CONTROLS:
USE GENERAL DILUTION VENTILATION AND/OR LOCAL EXHAUST VENTILATION TO
CONTROL AIRBORNE EXPOSURES TO BELOW RELEVANT EXPOSURE LIMITS AND/OR
CONTROL DUST/FUME/GAS/MIST/VAPORS/SPRAY. IF VENTILATION IS NOT ADEQUATE,
USE RESPIRATORY PROTECTION EQUIPMENT.
8.2.2. PERSONAL PROTECTIVE EQUIPMENT (PPE):
EYE/FACE PROTECTION:
SELECT AND USE EYE/FACE PROTECTION TO PREVENT CONTACT BASED ON THE RESULTS
OF AN EXPOSURE ASSESSMENT.
THE FOLLOWING EYE/FACE PROTECTION(S) ARE RECOMMENDED:
FULL FACE SHIELD
INDIRECT VENTED GOGGLES
SKIN/HAND PROTECTION:
SELECT AND USE GLOVES AND/OR PROTECTIVE CLOTHING APPROVED TO RELEVANT LOCAL
STANDARDS TO PREVENT SKIN CONTACT BASED ON THE RESULTS OF AN EXPOSURE
ASSESSMENT. SELECTION SHOULD BE BASED ON USE FACTORS SUCH AS EXPOSURE
LEVELS, CONCENTRATION OF THE SUBSTANCE OR MIXTURE, FREQUENCY AND DURATION,
PHYSICAL CHALLENGES SUCH AS TEMPERATURE EXTREMES, AND OTHER USE CONDITIONS.
CONSULT WITH YOUR GLOVE AND/OR PROTECTIVE CLOTHING MANUFACTURER FOR
SELECTION OF APPROPRIATE COMPATIBLE GLOVES/PROTECTIVE CLOTHING.
NOTE:
NITRILE GLOVES MAY BE WORN OVER POLYMER LAMINATE GLOVES TO IMPROVE
DEXTERITY.
GLOVES MADE FROM THE FOLLOWING MATERIAL(S) ARE RECOMMENDED:
POLYMER LAMINATE
IF THIS PRODUCT IS USED IN A MANNER THAT PRESENTS A HIGHER POTENTIAL FOR
EXPOSURE (EG. SPRAYING, HIGH SPLASH POTENTIAL ETC.), THEN USE OF PROTECTIVE
COVERALLS MAY BE NECESSARY. SELECT AND USE BODY PROTECTION TO PREVENT
CONTACT BASED ON THE RESULTS OF AN EXPOSURE ASSESSMENT. THE FOLLOWING
PROTECTIVE CLOTHING MATERIAL(S) ARE RECOMMENDED: APRON - POLYMER LAMINATE
RESPIRATORY PROTECTION:
AN EXPOSURE ASSESSMENT MAY BE NEEDED TO DECIDE IF A RESPIRATOR IS REQUIRED.
IF A RESPIRATOR IS NEEDED, USE RESPIRATORS AS PART OF A FULL RESPIRATORY
PROTECTION PROGRAM. BASED ON THE RESULTS OF THE EXPOSURE ASSESSMENT, SELECT
FROM THE FOLLOWING RESPIRATOR TYPE(S) TO REDUCE INHALATION EXPOSURE:
HALF FACEPIECE OR FULL FACEPIECE AIR-PURIFYING RESPIRATOR SUITABLE FOR
ORGANIC VAPORS AND PARTICULATES
FOR QUESTIONS ABOUT SUITABILITY FOR A SPECIFIC APPLICATION, CONSULT WITH
YOUR RESPIRATOR MANUFACTURER.
| SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES | |
9.1. INFORMATION ON BASIC PHYSICAL AND CHEMICAL PROPERTIES:
APPEARANCE:
PHYSICAL STATE: LIQUID
COLOR: LIGHT STRAW
SPECIFIC PHYSICAL FORM: VISCOUS
ODOR: EPOXY
ODOR THRESHOLD: NO DATA AVAILABLE
PH: NOT APPLICABLE
MELTING POINT: NO DATA AVAILABLE
BOILING POINT: NOT APPLICABLE
FLASH POINT:
>=240 DEG. C [TEST METHOD: CLOSED CUP]
[DETAILS: ESTIMATED]
EVAPORATION RATE: NOT APPLICABLE
FLAMMABILITY (SOLID, GAS): NOT APPLICABLE
FLAMMABLE LIMITS(LEL): NOT APPLICABLE
FLAMMABLE LIMITS(UEL): NOT APPLICABLE
VAPOR PRESSURE: <=0.03 MMHg [@ 25 DEG. C]
VAPOR DENSITY: NOT APPLICABLE
DENSITY: 1.18 G/ML
SPECIFIC GRAVITY: 1.18 [REF STD: WATER=1]
SOLUBILITY IN WATER: INSOLUBLE
SOLUBILITY-NON-WATER: NO DATA AVAILABLE
PARTITION COEFFICIENT N-OCTANOL/WATER: NO DATA AVAILABLE
AUTOIGNITION TEMPERATURE: NO DATA AVAILABLE
DECOMPOSITION TEMPERATURE: NO DATA AVAILABLE
VISCOSITY:
90,000 - 150,000 CENTIPOISE [@ 73.4 DEG. F]
[DETAILS: MITS DATA]
HAZARDOUS AIR POLLUTANTS: 0% WEIGHT
MOLECULAR WEIGHT: NO DATA AVAILABLE
VOC LESS H2O & EXEMPT SOLVENTS:
0 G/L [TEST METHOD: CALCULATED SCAQMD RULE 443.1]
[DETAILS: WHEN USED AS INTENDED WITH PART A]
VOC LESS H2O & EXEMPT SOLVENTS:
0 G/L [TEST METHOD: CALCULATED SCAQMD RULE 443.1]
[DETAILS: AS SUPPLIED]
VOC LESS H2O & EXEMPT SOLVENTS:
0% [TEST METHOD: CALCULATED PER CARB TITLE 2]
[DETAILS: WHEN USED AS INTENDED WITH PART A]
| SECTION 10: STABILITY AND REACTIVITY | |
10.1. REACTIVITY:
THIS MATERIAL MAY BE REACTIVE WITH CERTAIN AGENTS UNDER CERTAIN CONDITIONS
- SEE THE REMAINING HEADINGS IN THIS SECTION.
10.2. CHEMICAL STABILITY: STABLE.
10.3. POSSIBILITY OF HAZARDOUS REACTIONS:
HAZARDOUS POLYMERIZATION WILL NOT OCCUR.
10.4. CONDITIONS TO AVOID:
HEAT IS GENERATED DURING CURE. DO NOT CURE A MASS LARGER THAN 50 GRAMS IN A
CONFINED SPACE TO PREVENT A PREMATURE EXOTHERMIC REACTION WITH PRODUCTION
OF INTENSE HEAT AND SMOKE.
10.5. INCOMPATIBLE MATERIALS:
STRONG ACIDS
STRONG OXIDIZING AGENTS
10.6. HAZARDOUS DECOMPOSITION PRODUCTS:
SUBSTANCE CONDITION
NONE KNOWN.
REFER TO SECTION 5.2 FOR HAZARDOUS DECOMPOSITION PRODUCTS DURING
COMBUSTION.
| SECTION 11: TOXICOLOGICAL INFORMATION | |
THE INFORMATION BELOW MAY NOT BE CONSISTENT WITH THE MATERIAL
CLASSIFICATION IN SECTION 2 IF SPECIFIC INGREDIENT CLASSIFICATIONS ARE
MANDATED BY A COMPETENT AUTHORITY. IN ADDITION, TOXICOLOGICAL DATA ON
INGREDIENTS MAY NOT BE REFLECTED IN THE MATERIAL CLASSIFICATION AND/OR THE
SIGNS AND SYMPTOMS OF EXPOSURE, BECAUSE AN INGREDIENT MAY BE PRESENT BELOW
THE THRESHOLD FOR LABELING, AN INGREDIENT MAY NOT BE AVAILABLE FOR
EXPOSURE, OR THE DATA MAY NOT BE RELEVANT TO THE MATERIAL AS A WHOLE.
11.1. INFORMATION ON TOXICOLOGICAL EFFECTS:
SIGNS AND SYMPTOMS OF EXPOSURE:
BASED ON TEST DATA AND/OR INFORMATION ON THE COMPONENTS, THIS MATERIAL MAY
PRODUCE THE FOLLOWING HEALTH EFFECTS:
INHALATION:
RESPIRATORY TRACT IRRITATION:
SIGNS/SYMPTOMS MAY INCLUDE COUGH, SNEEZING, NASAL DISCHARGE, HEADACHE,
HOARSENESS, AND NOSE AND THROAT PAIN.
MAY CAUSE ADDITIONAL HEALTH EFFECTS (SEE BELOW).
SKIN CONTACT:
SKIN IRRITATION:
SIGNS/SYMPTOMS MAY INCLUDE LOCALIZED REDNESS, SWELLING, ITCHING, DRYNESS,
CRACKING, BLISTERING, AND PAIN.
ALLERGIC SKIN REACTION (NON-PHOTO INDUCED):
SIGNS/SYMPTOMS MAY INCLUDE REDNESS, SWELLING, BLISTERING, AND ITCHING.
MAY CAUSE ADDITIONAL HEALTH EFFECTS (SEE BELOW).
EYE CONTACT:
CORROSIVE (EYE BURNS):
SIGNS/SYMPTOMS MAY INCLUDE CLOUDY APPEARANCE OF THE CORNEA, CHEMICAL BURNS,
SEVERE PAIN, TEARING, ULCERATIONS, SIGNIFICANTLY IMPAIRED VISION OR
COMPLETE LOSS OF VISION.
INGESTION:
GASTROINTESTINAL IRRITATION:
SIGNS/SYMPTOMS MAY INCLUDE ABDOMINAL PAIN, STOMACH UPSET, NAUSEA, VOMITING
AND DIARRHEA. MAY CAUSE ADDITIONAL HEALTH EFFECTS (SEE BELOW).
ADDITIONAL HEALTH EFFECTS:
REPRODUCTIVE/DEVELOPMENTAL TOXICITY:
CONTAINS A CHEMICAL OR CHEMICALS WHICH CAN CAUSE BIRTH DEFECTS OR OTHER
REPRODUCTIVE HARM.
GENOTOXICITY:
GENOTOXICITY AND MUTAGENICITY: MAY INTERACT WITH GENETIC MATERIAL AND
POSSIBLY ALTER GENE EXPRESSION.
TOXICOLOGICAL DATA:
IF A COMPONENT IS DISCLOSED IN SECTION 3 BUT DOES NOT APPEAR IN A TABLE
BELOW, EITHER NO DATA ARE AVAILABLE FOR THAT ENDPOINT OR THE DATA ARE NOT
SUFFICIENT FOR CLASSIFICATION.
ACUTE TOXICITY:
NAME ROUTE SPECIES VALUE
OVERALL PRODUCT INGESTION NO DATA AVAILABLE; CALCULATED
ATE: >5,000 MG/KG
EPOXY RESIN 1 DERMAL RAT LD50: >1,600 MG/KG
EPOXY RESIN 1 INGESTION RAT LD50: >1,000 MG/KG
EPOXY RESIN 2 DERMAL RAT LD50: >3,170 MG/KG
EPOXY RESIN 2 INGESTION RAT LD50: 3,398 MG/KG
AMORPHOUS SILICA DERMAL RABBIT LD50: >5,000 MG/KG
AMORPHOUS SILICA INHALATION- RAT LC50: >0.691 MG/L
DUST/MIST
(4 HOURS)
AMORPHOUS SILICA INGESTION RAT LD50: >5,110 MG/KG
ATE = ACUTE TOXICITY ESTIMATE
SKIN CORROSION/IRRITATION:
NAME SPECIES VALUE
OVERALL PRODUCT IN VITRO DATA IRRITANT
EPOXY RESIN 1 RABBIT MILD IRRITANT
EPOXY RESIN 2 RABBIT CORROSIVE
AMORPHOUS SILICA RABBIT NO SIGNIFICANT IRRITATION
SERIOUS EYE DAMAGE/IRRITATION:
NAME SPECIES VALUE
EPOXY RESIN 1 RABBIT MODERATE IRRITANT
EPOXY RESIN 2 RABBIT CORROSIVE
AMORPHOUS SILICA RABBIT NO SIGNIFICANT IRRITATION
SKIN SENSITIZATION:
NAME SPECIES VALUE
EPOXY RESIN 1 HUMAN AND ANIMAL SENSITIZING
EPOXY RESIN 2 SIMILAR COMPOUNDS SENSITIZING
AMORPHOUS SILICA HUMAN AND ANIMAL NOT CLASSIFIED
RESPIRATORY SENSITIZATION:
NAME SPECIES VALUE
EPOXY RESIN 1 HUMAN NOT CLASSIFIED
GERM CELL MUTAGENICITY:
NAME ROUTE VALUE
EPOXY RESIN 1 IN VIVO NOT MUTAGENIC
EPOXY RESIN 1 IN VITRO SOME POSITIVE DATA EXIST, BUT THE DATA ARE NOT
SUFFICIENT FOR CLASSIFICATION
EPOXY RESIN 2 IN VITRO SOME POSITIVE DATA EXIST, BUT THE DATA ARE NOT
SUFFICIENT FOR CLASSIFICATION
EPOXY RESIN 2 IN VIVO MUTAGENIC
AMORPHOUS SILICA IN VITRO NOT MUTAGENIC
CARCINOGENICITY:
NAME ROUTE SPECIES VALUE
EPOXY RESIN 1 DERMAL MOUSE SOME POSITIVE DATA EXIST,
BUT THE DATA ARE NOT SUFFICIENT
FOR CLASSIFICATION
AMORPHOUS SILICA NOT SPECIFIED MOUSE SOME POSITIVE DATA EXIST, BUT
THE DATA ARE NOT SUFFICIENT
FOR CLASSIFICATION
REPRODUCTIVE TOXICITY:
REPRODUCTIVE AND/OR DEVELOPMENTAL EFFECTS:
NAME ROUTE VALUE SPECIES TEST RESULT EXPOSURE
DURATION
EPOXY RESIN 1 INGESTION NOT CLASSIFIED RAT NOAEL: 2
FOR FEMALE 750 GENERATION
REPRODUCTION MG/KG/DAY
EPOXY RESIN 1 INGESTION NOT CLASSIFIED RAT NOAEL: 2
FOR MALE 750 GENERATION
REPRODUCTION MG/KG/DAY
EPOXY RESIN 1 DERMAL NOT CLASSIFIED RABBIT NOAEL: DURING
FOR DEVELOPMENT 300 ORGANOGEN-
MG/KG/DAY ESIS
EPOXY RESIN 1 INGESTION NOT CLASSIFIED RAT NOAEL: 2
FOR DEVELOPMENT 750 GENERATION
MG/KG/DAY
EPOXY RESIN 2 INGESTION NOT CLASSIFIED RAT NOAEL: PREMATING
FOR FEMALE 100 INTO
REPRODUCTION MG/KG/DAY LACTATION
EPOXY RESIN 2 INGESTION NOT CLASSIFIED RAT NOAEL: PREMATING
FOR DEVELOPMENT 100 INTO
MG/KG/DAY LACTATION
EPOXY RESIN 2 INGESTION TOXIC TO MALE RAT NOAEL: 14 DAYS
REPRODUCTION 100
MG/KG/DAY
AMORPHOUS INGESTION NOT CLASSIFIED RAT NOAEL: 1
SILICA FOR FEMALE 509 GENERATION
REPRODUCTION MG/KG/DAY
AMORPHOUS INGESTION NOT CLASSIFIED RAT NOAEL: 497 1
SILICA FOR MALE MG/KG/DAY GENERATION
REPRODUCTION
AMORPHOUS INGESTION NOT CLASSIFIED RAT NOAEL: DURING
SILICA FOR DEVELOPMENT 1,350 ORGANOGE-
MG/KG/DAY NESIS
TARGET ORGAN(S):
SPECIFIC TARGET ORGAN TOXICITY - SINGLE EXPOSURE:
NAME ROUTE TARGET ORGAN(S) VALUE
EPOXY RESIN 2 INHALATION RESPIRATORY IRRITATION SOME POSITIVE DATA
EXIST, BUT THE DATA ARE
NOT SUFFICIENT FOR
CLASSIFICATION
NAME SPECIES TEST RESULT EXPOSURE
DURATION
EPOXY RESIN 2 SIMILAR HEALTH HAZARDS NOAEL: NOT AVAILABLE
SPECIFIC TARGET ORGAN TOXICITY - REPEATED EXPOSURE:
NAME ROUTE TARGET ORGAN(S) VALUE
EPOXY RESIN 1 DERMAL LIVER NOT CLASSIFIED
EPOXY RESIN 1 DERMAL NERVOUS SYSTEM NOT CLASSIFIED
EPOXY RESIN 1 INGESTION AUDITORY SYSTEM | NOT CLASSIFIED
HEART | ENDOCRINE
SYSTEM |
HEMATOPOIETIC
SYSTEM | LIVER |
EYES | KIDNEY
AND/OR BLADDER
EPOXY RESIN 2 INGESTION HEART | SKIN | NOT CLASSIFIED
ENDOCRINE SYSTEM |
GASTROINTESTINAL
TRACT | BONE,
TEETH, NAILS,
AND/OR HAIR |
HEMATOPOIETIC
SYSTEM | LIVER |
IMMUNE SYSTEM |
MUSCLES | NERVOUS
SYSTEM | EYES |
KIDNEY AND/OR
BLADDER |
RESPIRATORY
SYSTEM | VASCULAR
SYSTEM
AMORPHOUS INHALATION RESPIRATORY SYSTEM | NOT CLASSIFIED
SILICA SILICOSIS
NAME SPECIES TEST RESULT EXPOSURE DURATION
EPOXY RESIN 1 RAT NOAEL: 1,000 MG/KG/DAY 2 YEARS
EPOXY RESIN 1 RAT NOAEL: 1,000 MG/KG/DAY 13 WEEKS
EPOXY RESIN 1 RAT NOAEL: 1,000 MG/KG/DAY 28 DAYS
EPOXY RESIN 2 RAT NOAEL: 300 MG/KG/DAY 43 DAYS
AMORPHOUS SILICA HUMAN NOAEL: NOT AVAILABLE OCCUPATIONAL EXPOSURE
ASPIRATION HAZARD:
FOR THE COMPONENT/COMPONENTS, EITHER NO DATA ARE CURRENTLY AVAILABLE OR THE
DATA ARE NOT SUFFICIENT FOR CLASSIFICATION.
PLEASE CONTACT THE ADDRESS OR PHONE NUMBER LISTED IN SECTION 1 OF THIS
SDS FOR ADDITIONAL TOXICOLOGICAL INFORMATION ON THIS MATERIAL AND/OR
ITS COMPONENTS.
| SECTION 12: ECOLOGICAL INFORMATION | |
ECOTOXICOLOGICAL INFORMATION:
PLEASE CONTACT THE ADDRESS OR PHONE NUMBER LISTED IN SECTION 1 OF THIS
SDS FOR ADDITIONAL ECOTOXICOLOGICAL INFORMATION ON THIS MATERIAL AND/OR
ITS COMPONENTS.
CHEMICAL FATE INFORMATION:
PLEASE CONTACT THE ADDRESS OR PHONE NUMBER LISTED IN SECTION 1 OF THIS
SDS FOR ADDITIONAL CHEMICAL FATE INFORMATION ON THIS MATERIAL AND/OR ITS
COMPONENTS.
| SECTION 13: DISPOSAL CONSIDERATIONS | |
13.1. DISPOSAL METHODS:
DISPOSE OF CONTENTS/CONTAINER IN ACCORDANCE WITH THE
LOCAL/REGIONAL/NATIONAL/INTERNATIONAL REGULATIONS.
DISPOSE OF COMPLETELY CURED (OR POLYMERIZED) MATERIAL IN A PERMITTED
INDUSTRIAL WASTE FACILITY. AS A DISPOSAL ALTERNATIVE, INCINERATE UNCURED
PRODUCT IN A PERMITTED WASTE INCINERATION FACILITY. PROPER DESTRUCTION MAY
REQUIRE THE USE OF ADDITIONAL FUEL DURING INCINERATION PROCESSES.
COMBUSTION PRODUCTS WILL INCLUDE HALOGEN ACID (HCL/HF/HBR). FACILITY
MUST BE CAPABLE OF HANDLING HALOGENATED MATERIALS. EMPTY DRUMS/BARRELS/
CONTAINERS USED FOR TRANSPORTING AND HANDLING HAZARDOUS CHEMICALS
(CHEMICAL SUBSTANCES/MIXTURES/PREPARATIONS CLASSIFIED AS HAZARDOUS AS
PER APPLICABLE REGULATIONS) SHALL BE CONSIDERED, STORED, TREATED &
DISPOSED OF AS HAZARDOUS WASTES UNLESS OTHERWISE DEFINED BY APPLICABLE
WASTE REGULATIONS. CONSULT WITH THE RESPECTIVE REGULATING AUTHORITIES
TO DETERMINE THE AVAILABLE TREATMENT AND DISPOSAL FACILITIES.
EPA HAZARDOUS WASTE NUMBER (RCRA): NOT REGULATED
| SECTION 14: TRANSPORT INFORMATION | |
FOR TRANSPORT INFORMATION, PLEASE VISIT:
HTTP://3M.COM/TRANSPORTINFO OR CALL 1-800-364-3577 OR 651-737-6501.
| SECTION 15: REGULATORY INFORMATION | |
15.1. US FEDERAL REGULATIONS: CONTACT 3M FOR MORE INFORMATION.
EPCRA 311/312 HAZARD CLASSIFICATIONS:
PHYSICAL HAZARDS: NOT APPLICABLE
HEALTH HAZARDS:
GERM CELL MUTAGENICITY
REPRODUCTIVE TOXICITY
RESPIRATORY OR SKIN SENSITIZATION
SERIOUS EYE DAMAGE OR EYE IRRITATION
SKIN CORROSION OR IRRITATION
15.2. STATE REGULATIONS: CONTACT 3M FOR MORE INFORMATION.
15.3. CHEMICAL INVENTORIES:
THE COMPONENTS OF THIS PRODUCT ARE IN COMPLIANCE WITH THE CHEMICAL
NOTIFICATION REQUIREMENTS OF TSCA. ALL REQUIRED COMPONENTS OF THIS
PRODUCT ARE LISTED ON THE ACTIVE PORTION OF THE TSCA INVENTORY.
CONTACT 3M FOR MORE INFORMATION.
15.4. INTERNATIONAL REGULATIONS: CONTACT 3M FOR MORE INFORMATION.
THIS SDS HAS BEEN PREPARED TO MEET THE U.S. OSHA HAZARD COMMUNICATION
STANDARD, 29 CFR 1910.1200.
| SECTION 16: OTHER INFORMATION | |
NFPA HAZARD CLASSIFICATION:
HEALTH 3
FLAMMABILITY 1
INSTABILITY 1
SPECIAL HAZARDS NONE
NATIONAL FIRE PROTECTION ASSOCIATION (NFPA) HAZARD RATINGS ARE DESIGNED FOR
USE BY EMERGENCY RESPONSE PERSONNEL TO ADDRESS THE HAZARDS THAT ARE
PRESENTED BY SHORT-TERM, ACUTE EXPOSURE TO A MATERIAL UNDER CONDITIONS OF
FIRE, SPILL, OR SIMILAR EMERGENCIES. HAZARD RATINGS ARE PRIMARILY BASED ON
THE INHERENT PHYSICAL AND TOXIC PROPERTIES OF THE MATERIAL BUT ALSO INCLUDE
THE TOXIC PROPERTIES OF COMBUSTION OR DECOMPOSITION PRODUCTS THAT ARE KNOWN
TO BE GENERATED IN SIGNIFICANT QUANTITIES.
DOCUMENT GROUP: 11-2401-5
VERSION NUMBER: 19.00
ISSUE DATE: 11/07/19
SUPERCEDES DATE: 04/03/19
DISCLAIMER:
THE INFORMATION IN THIS SAFETY DATA SHEET (SDS) IS BELIEVED TO BE CORRECT
AS OF THE DATE ISSUED. 3M MAKES NO WARRANTIES, EXPRESSED OR IMPLIED,
INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE OR COURSE OF PERFORMANCE OR USAGE OF
TRADE. USER IS RESPONSIBLE FOR DETERMINING WHETHER THE 3M PRODUCT IS FIT
FOR A PARTICULAR PURPOSE AND SUITABLE FOR USER'S METHOD OF USE OR
APPLICATION. GIVEN THE VARIETY OF FACTORS THAT CAN AFFECT THE USE AND
APPLICATION OF A 3M PRODUCT, SOME OF WHICH ARE UNIQUELY WITHIN THE USER'S
KNOWLEDGE AND CONTROL, IT IS ESSENTIAL THAT THE USER EVALUATE THE 3M
PRODUCT TO DETERMINE WHETHER IT IS FIT FOR A PARTICULAR PURPOSE AND
SUITABLE FOR USER'S METHOD OF USE OR APPLICATION.
3M PROVIDES INFORMATION IN ELECTRONIC FORM AS A SERVICE TO ITS CUSTOMERS.
DUE TO THE REMOTE POSSIBILITY THAT ELECTRONIC TRANSFER MAY HAVE RESULTED IN
ERRORS, OMISSIONS OR ALTERATIONS IN THIS INFORMATION, 3M MAKES NO
REPRESENTATIONS AS TO ITS COMPLETENESS OR ACCURACY. IN ADDITION,
INFORMATION OBTAINED FROM A DATABASE MAY NOT BE AS CURRENT AS THE
INFORMATION IN THE SDS AVAILABLE DIRECTLY FROM 3M.
3M USA SDSS ARE AVAILABLE AT WWW.3M.COM
3M(TM) SCOTCH-WELD(TM) EPOXY ADHESIVE DP100NS TRANSLUCENT, PART A
01/14/19
3M
SAFETY DATA SHEET
COPYRIGHT, 2019, 3M COMPANY.
ALL RIGHTS RESERVED. COPYING AND/OR DOWNLOADING OF THIS INFORMATION FOR
THE PURPOSE OF PROPERLY UTILIZING 3M PRODUCTS IS ALLOWED PROVIDED THAT:
(1) THE INFORMATION IS COPIED IN FULL WITH NO CHANGES UNLESS PRIOR WRITTEN
AGREEMENT IS OBTAINED FROM 3M, AND
(2) NEITHER THE COPY NOR THE ORIGINAL IS RESOLD OR OTHERWISE DISTRIBUTED
WITH THE INTENTION OF EARNING A PROFIT THEREON.
DOCUMENT GROUP: 11-2402-3
VERSION NUMBER: 23.02
ISSUE DATE: 01/14/19
SUPERCEDES DATE: 08/13/18
| SECTION 1: IDENTIFICATION | |
1.1. PRODUCT IDENTIFIER:
3M(TM) SCOTCH-WELD(TM) EPOXY ADHESIVE DP100NS TRANSLUCENT, PART A
PRODUCT IDENTIFICATION NUMBERS: DP-100
1.2. RECOMMENDED USE AND RESTRICTIONS ON USE:
RECOMMENDED USE: ACCELERATOR FOR 2-PART EPOXY ADHESIVE, STRUCTURAL ADHESIVE
1.3. SUPPLIER'S DETAILS:
MANUFACTURER: 3M
DIVISION: INDUSTRIAL ADHESIVES AND TAPES DIVISION
ADDRESS:
3M CENTER
ST. PAUL, MN 55144-1000
USA
TELEPHONE: 1-888-3M HELPS (1-888-364-3577)
1.4. EMERGENCY TELEPHONE NUMBER:
1-800-364-3577 OR (651) 737-6501 (24 HOURS)
| SECTION 2: HAZARD IDENTIFICATION | |
2.1. HAZARD CLASSIFICATION:
SERIOUS EYE DAMAGE/IRRITATION: CATEGORY 2A.
SKIN CORROSION/IRRITATION: CATEGORY 2.
SKIN SENSITIZER: CATEGORY 1.
2.2. LABEL ELEMENTS:
SIGNAL WORD: WARNING
SYMBOLS: EXCLAMATION MARK
PICTOGRAMS: EXCLAMATION MARK
HAZARD STATEMENTS:
CAUSES SERIOUS EYE IRRITATION.
CAUSES SKIN IRRITATION.
MAY CAUSE AN ALLERGIC SKIN REACTION.
PRECAUTIONARY STATEMENTS:
PREVENTION:
AVOID BREATHING DUST/FUME/GAS/MIST/VAPORS/SPRAY.
WEAR PROTECTIVE GLOVES AND EYE/FACE PROTECTION.
WASH THOROUGHLY AFTER HANDLING.
CONTAMINATED WORK CLOTHING MUST NOT BE ALLOWED OUT OF THE WORKPLACE.
RESPONSE:
IF IN EYES:
RINSE CAUTIOUSLY WITH WATER FOR SEVERAL MINUTES. REMOVE CONTACT LENSES, IF
PRESENT AND EASY TO DO. CONTINUE RINSING.
IF EYE IRRITATION PERSISTS: GET MEDICAL ADVICE/ATTENTION.
IF ON SKIN: WASH WITH PLENTY OF SOAP AND WATER.
IF SKIN IRRITATION OR RASH OCCURS: GET MEDICAL ADVICE/ATTENTION.
TAKE OFF CONTAMINATED CLOTHING AND WASH IT BEFORE REUSE.
DISPOSAL:
DISPOSE OF CONTENTS/CONTAINER IN ACCORDANCE WITH APPLICABLE
LOCAL/REGIONAL/NATIONAL/INTERNATIONAL REGULATIONS.
2% OF THE MIXTURE CONSISTS OF INGREDIENTS OF UNKNOWN ACUTE ORAL TOXICITY.
3% OF THE MIXTURE CONSISTS OF INGREDIENTS OF UNKNOWN ACUTE DERMAL TOXICITY.
| SECTION 3: COMPOSITION/INFORMATION ON INGREDIENTS | |
INGREDIENT C.A.S. NO. % BY WT
POLYPROPYLENEGLYCOLTRIMERCAPTANETHER 72244-98-5 60 - 80 TRADE
SECRET *
HYDROGENATED TERPHENYL 61788-32-7 5 - 20 TRADE
SECRET *
2,4,6-TRIS((DIMETHYLAMINO)METHYL)PHENOL 90-72-2 5 - 15 TRADE
SECRET *
AMORPHOUS SILICA 67762-90-7 1 - 5 TRADE SECRET *
BIS[(DIMETHYLAMINO)METHYL]PHENOL 71074-89-0 <3 TRADE SECRET *
POLYPHENYLS, PARTIALLY HYDROGENATED 68956-74-1 <3 TRADE SECRET *
ORGANOSILANE 4420-74-0 <0.5 TRADE SECRET *
*THE SPECIFIC CHEMICAL IDENTITY AND/OR EXACT PERCENTAGE (CONCENTRATION) OF
THIS COMPOSITION HAS BEEN WITHHELD AS A TRADE SECRET.
| SECTION 4: FIRST AID MEASURES | |
4.1. DESCRIPTION OF FIRST AID MEASURES:
INHALATION:
REMOVE PERSON TO FRESH AIR. IF YOU FEEL UNWELL, GET MEDICAL ATTENTION.
SKIN CONTACT:
IMMEDIATELY WASH WITH SOAP AND WATER. REMOVE CONTAMINATED CLOTHING AND WASH
BEFORE REUSE. IF SIGNS/SYMPTOMS DEVELOP, GET MEDICAL ATTENTION.
EYE CONTACT:
IMMEDIATELY FLUSH WITH LARGE AMOUNTS OF WATER. REMOVE CONTACT LENSES IF
EASY TO DO. CONTINUE RINSING. GET MEDICAL ATTENTION.
IF SWALLOWED: RINSE MOUTH. IF YOU FEEL UNWELL, GET MEDICAL ATTENTION.
4.2. MOST IMPORTANT SYMPTOMS AND EFFECTS, BOTH ACUTE AND DELAYED:
SEE SECTION 11.1. INFORMATION ON TOXICOLOGICAL EFFECTS.
4.3. INDICATION OF ANY IMMEDIATE MEDICAL ATTENTION AND SPECIAL TREATMENT
REQUIRED: NOT APPLICABLE
| SECTION 5: FIRE-FIGHTING MEASURES | |
5.1. SUITABLE EXTINGUISHING MEDIA:
IN CASE OF FIRE:
USE A FIRE FIGHTING AGENT SUITABLE FOR ORDINARY COMBUSTIBLE MATERIAL SUCH
AS WATER OR FOAM TO EXTINGUISH.
5.2. SPECIAL HAZARDS ARISING FROM THE SUBSTANCE OR MIXTURE:
NONE INHERENT IN THIS PRODUCT.
HAZARDOUS DECOMPOSITION OR BY-PRODUCTS:
SUBSTANCE CONDITION
CARBON MONOXIDE DURING COMBUSTION
CARBON DIOXIDE DURING COMBUSTION
HYDROGEN SULFIDE DURING COMBUSTION
OXIDES OF NITROGEN DURING COMBUSTION
OXIDES OF SULFUR DURING COMBUSTION
5.3. SPECIAL PROTECTIVE ACTIONS FOR FIRE-FIGHTERS:
WEAR FULL PROTECTIVE CLOTHING, INCLUDING HELMET, SELF-CONTAINED, POSITIVE
PRESSURE OR PRESSURE DEMAND BREATHING APPARATUS, BUNKER COAT AND PANTS,
BANDS AROUND ARMS, WAIST AND LEGS, FACE MASK, AND PROTECTIVE COVERING FOR
EXPOSED AREAS OF THE HEAD.
| SECTION 6: ACCIDENTAL RELEASE MEASURES | |
6.1. PERSONAL PRECAUTIONS, PROTECTIVE EQUIPMENT AND EMERGENCY PROCEDURES:
EVACUATE AREA. VENTILATE THE AREA WITH FRESH AIR. FOR LARGE SPILL, OR
SPILLS IN CONFINED SPACES, PROVIDE MECHANICAL VENTILATION TO DISPERSE OR
EXHAUST VAPORS, IN ACCORDANCE WITH GOOD INDUSTRIAL HYGIENE PRACTICE. REFER
TO OTHER SECTIONS OF THIS SDS FOR INFORMATION REGARDING PHYSICAL AND HEALTH
HAZARDS, RESPIRATORY PROTECTION, VENTILATION, AND PERSONAL PROTECTIVE
EQUIPMENT.
6.2. ENVIRONMENTAL PRECAUTIONS:
AVOID RELEASE TO THE ENVIRONMENT. FOR LARGER SPILLS, COVER DRAINS AND BUILD
DIKES TO PREVENT ENTRY INTO SEWER SYSTEMS OR BODIES OF WATER.
6.3. METHODS AND MATERIAL FOR CONTAINMENT AND CLEANING UP:
CONTAIN SPILL. WORKING FROM AROUND THE EDGES OF THE SPILL INWARD, COVER
WITH BENTONITE, VERMICULITE, OR COMMERCIALLY AVAILABLE INORGANIC ABSORBENT
MATERIAL. MIX IN SUFFICIENT ABSORBENT UNTIL IT APPEARS DRY. REMEMBER,
ADDING AN ABSORBENT MATERIAL DOES NOT REMOVE A PHYSICAL, HEALTH, OR
ENVIRONMENTAL HAZARD. COLLECT AS MUCH OF THE SPILLED MATERIAL AS POSSIBLE.
PLACE IN A CLOSED CONTAINER APPROVED FOR TRANSPORTATION BY APPROPRIATE
AUTHORITIES. CLEAN UP RESIDUE WITH AN APPROPRIATE SOLVENT SELECTED BY A
QUALIFIED AND AUTHORIZED PERSON. VENTILATE THE AREA WITH FRESH AIR. READ
AND FOLLOW SAFETY PRECAUTIONS ON THE SOLVENT LABEL AND SDS. SEAL THE
CONTAINER. DISPOSE OF COLLECTED MATERIAL AS SOON AS POSSIBLE IN ACCORDANCE
WITH APPLICABLE LOCAL/REGIONAL/NATIONAL/INTERNATIONAL REGULATIONS.
| SECTION 7: HANDLING AND STORAGE | |
7.1. PRECAUTIONS FOR SAFE HANDLING:
AVOID BREATHING DUST/FUME/GAS/MIST/VAPORS/SPRAY. DO NOT GET IN EYES, ON
SKIN, OR ON CLOTHING. DO NOT EAT, DRINK OR SMOKE WHEN USING THIS PRODUCT.
WASH THOROUGHLY AFTER HANDLING. CONTAMINATED WORK CLOTHING SHOULD NOT BE
ALLOWED OUT OF THE WORKPLACE. AVOID RELEASE TO THE ENVIRONMENT. WASH
CONTAMINATED CLOTHING BEFORE REUSE. AVOID CONTACT WITH OXIDIZING AGENTS
(EG. CHLORINE, CHROMIC ACID ETC.)
7.2. CONDITIONS FOR SAFE STORAGE INCLUDING ANY INCOMPATIBILITIES:
STORE AWAY FROM ACIDS. STORE AWAY FROM OXIDIZING AGENTS.
| SECTION 8: EXPOSURE CONTROLS/PERSONAL PROTECTION | |
8.1. CONTROL PARAMETERS:
OCCUPATIONAL EXPOSURE LIMITS:
IF A COMPONENT IS DISCLOSED IN SECTION 3 BUT DOES NOT APPEAR IN THE TABLE
BELOW, AN OCCUPATIONAL EXPOSURE LIMIT IS NOT AVAILABLE FOR THE COMPONENT.
INGREDIENT C.A.S. NO. AGENCY LIMIT TYPE ADDITIONAL
COMMENTS
HYDROGENATED TERPHENYL 61788-32-7 ACGIH TWA: 0.5 PPM
SILICA, AMORPHOUS 67762-90-7 OSHA TWA CONCENTRATION:
0.8 MG/M3;
TWA: 20 MILLIONS OF
PARTICLES/CU. FT.
ACGIH: AMERICAN CONFERENCE OF GOVERNMENTAL INDUSTRIAL HYGIENISTS
AIHA: AMERICAN INDUSTRIAL HYGIENE ASSOCIATION
CMRG: CHEMICAL MANUFACTURER'S RECOMMENDED GUIDELINES
OSHA:
UNITED STATES DEPARTMENT OF LABOR - OCCUPATIONAL SAFETY AND HEALTH
ADMINISTRATION
TWA: TIME-WEIGHTED-AVERAGE
STEL: SHORT TERM EXPOSURE LIMIT
CEIL: CEILING
8.2. EXPOSURE CONTROLS:
8.2.1. ENGINEERING CONTROLS:
USE GENERAL DILUTION VENTILATION AND/OR LOCAL EXHAUST VENTILATION TO
CONTROL AIRBORNE EXPOSURES TO BELOW RELEVANT EXPOSURE LIMITS AND/OR
CONTROL DUST/FUME/GAS/MIST/VAPORS/SPRAY. IF VENTILATION IS NOT ADEQUATE,
USE RESPIRATORY PROTECTION EQUIPMENT.
8.2.2. PERSONAL PROTECTIVE EQUIPMENT (PPE):
EYE/FACE PROTECTION:
SELECT AND USE EYE/FACE PROTECTION TO PREVENT CONTACT BASED ON THE RESULTS
OF AN EXPOSURE ASSESSMENT.
THE FOLLOWING EYE/FACE PROTECTION(S) ARE RECOMMENDED:
INDIRECT VENTED GOGGLES
SKIN/HAND PROTECTION:
SELECT AND USE GLOVES AND/OR PROTECTIVE CLOTHING APPROVED TO RELEVANT LOCAL
STANDARDS TO PREVENT SKIN CONTACT BASED ON THE RESULTS OF AN EXPOSURE
ASSESSMENT. SELECTION SHOULD BE BASED ON USE FACTORS SUCH AS EXPOSURE
LEVELS, CONCENTRATION OF THE SUBSTANCE OR MIXTURE, FREQUENCY AND DURATION,
PHYSICAL CHALLENGES SUCH AS TEMPERATURE EXTREMES, AND OTHER USE CONDITIONS.
CONSULT WITH YOUR GLOVE AND/OR PROTECTIVE CLOTHING MANUFACTURER FOR
SELECTION OF APPROPRIATE COMPATIBLE GLOVES/PROTECTIVE CLOTHING.
NOTE:
NITRILE GLOVES MAY BE WORN OVER POLYMER LAMINATE GLOVES TO IMPROVE
DEXTERITY.
GLOVES MADE FROM THE FOLLOWING MATERIAL(S) ARE RECOMMENDED:
POLYMER LAMINATE
RESPIRATORY PROTECTION:
AN EXPOSURE ASSESSMENT MAY BE NEEDED TO DECIDE IF A RESPIRATOR IS REQUIRED.
IF A RESPIRATOR IS NEEDED, USE RESPIRATORS AS PART OF A FULL RESPIRATORY
PROTECTION PROGRAM. BASED ON THE RESULTS OF THE EXPOSURE ASSESSMENT, SELECT
FROM THE FOLLOWING RESPIRATOR TYPE(S) TO REDUCE INHALATION EXPOSURE:
HALF FACEPIECE OR FULL FACEPIECE AIR-PURIFYING RESPIRATOR SUITABLE FOR
ORGANIC VAPORS AND PARTICULATES
FOR QUESTIONS ABOUT SUITABILITY FOR A SPECIFIC APPLICATION, CONSULT WITH
YOUR RESPIRATOR MANUFACTURER.
| SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES | |
9.1. INFORMATION ON BASIC PHYSICAL AND CHEMICAL PROPERTIES:
GENERAL PHYSICAL FORM: LIQUID
SPECIFIC PHYSICAL FORM: VISCOUS
ODOR, COLOR, GRADE: LIGHT AMBER, STRONG MERCAPTAN ODOR
ODOR THRESHOLD: NO DATA AVAILABLE
PH: NOT APPLICABLE
MELTING POINT: NOT APPLICABLE
BOILING POINT: NOT APPLICABLE
FLASH POINT: >=149 DEG. C [TEST METHOD: ESTIMATED]
EVAPORATION RATE: NOT APPLICABLE
FLAMMABILITY (SOLID, GAS): NOT APPLICABLE
FLAMMABLE LIMITS(LEL): NOT APPLICABLE
FLAMMABLE LIMITS(UEL): NOT APPLICABLE
VAPOR PRESSURE: <=0.02 MMHg [@ 20 DEG. C]
VAPOR DENSITY: NOT APPLICABLE
DENSITY: 1.15 G/ML
SPECIFIC GRAVITY: 1.15 [REF STD: WATER=1]
SOLUBILITY IN WATER: NEGLIGIBLE
SOLUBILITY-NON-WATER: NO DATA AVAILABLE
PARTITION COEFFICIENT N-OCTANOL/WATER: NO DATA AVAILABLE
AUTOIGNITION TEMPERATURE: NO DATA AVAILABLE
DECOMPOSITION TEMPERATURE: NO DATA AVAILABLE
VISCOSITY: 50,000 - 85,000 CENTIPOISE
HAZARDOUS AIR POLLUTANTS: 0% WEIGHT [TEST METHOD: CALCULATED]
MOLECULAR WEIGHT: NO DATA AVAILABLE
VOC LESS H2O & EXEMPT SOLVENTS:
0 G/L [TEST METHOD: CALCULATED SCAQMD RULE 443.1]
[DETAILS: WHEN USED AS INTENDED WITH PART B]
VOC LESS H2O & EXEMPT SOLVENTS:
5 G/L [TEST METHOD: CALCULATED SCAQMD RULE 443.1]
[DETAILS: AS SUPPLIED]
VOC LESS H2O & EXEMPT SOLVENTS:
0% [TEST METHOD: CALCULATED PER CARB TITLE 2]
[DETAILS: WHEN USED AS INTENDED WITH PART B]
| SECTION 10: STABILITY AND REACTIVITY | |
10.1. REACTIVITY:
THIS MATERIAL MAY BE REACTIVE WITH CERTAIN AGENTS UNDER CERTAIN CONDITIONS
- SEE THE REMAINING HEADINGS IN THIS SECTION.
10.2. CHEMICAL STABILITY: STABLE.
10.3. POSSIBILITY OF HAZARDOUS REACTIONS:
HAZARDOUS POLYMERIZATION WILL NOT OCCUR.
10.4. CONDITIONS TO AVOID:
HEAT IS GENERATED DURING CURE. DO NOT CURE A MASS LARGER THAN 50 GRAMS IN A
CONFINED SPACE TO PREVENT A PREMATURE EXOTHERMIC REACTION WITH PRODUCTION
OF INTENSE HEAT AND SMOKE.
10.5. INCOMPATIBLE MATERIALS:
STRONG OXIDIZING AGENTS
STRONG ACIDS
10.6. HAZARDOUS DECOMPOSITION PRODUCTS:
SUBSTANCE CONDITION
NONE KNOWN.
REFER TO SECTION 5.2 FOR HAZARDOUS DECOMPOSITION PRODUCTS DURING
COMBUSTION.
| SECTION 11: TOXICOLOGICAL INFORMATION | |
THE INFORMATION BELOW MAY NOT BE CONSISTENT WITH THE MATERIAL
CLASSIFICATION IN SECTION 2 IF SPECIFIC INGREDIENT CLASSIFICATIONS ARE
MANDATED BY A COMPETENT AUTHORITY. IN ADDITION, TOXICOLOGICAL DATA ON
INGREDIENTS MAY NOT BE REFLECTED IN THE MATERIAL CLASSIFICATION AND/OR THE
SIGNS AND SYMPTOMS OF EXPOSURE, BECAUSE AN INGREDIENT MAY BE PRESENT BELOW
THE THRESHOLD FOR LABELING, AN INGREDIENT MAY NOT BE AVAILABLE FOR
EXPOSURE, OR THE DATA MAY NOT BE RELEVANT TO THE MATERIAL AS A WHOLE.
11.1. INFORMATION ON TOXICOLOGICAL EFFECTS:
SIGNS AND SYMPTOMS OF EXPOSURE:
BASED ON TEST DATA AND/OR INFORMATION ON THE COMPONENTS, THIS MATERIAL MAY
PRODUCE THE FOLLOWING HEALTH EFFECTS:
INHALATION:
RESPIRATORY TRACT IRRITATION:
SIGNS/SYMPTOMS MAY INCLUDE COUGH, SNEEZING, NASAL DISCHARGE, HEADACHE,
HOARSENESS, AND NOSE AND THROAT PAIN.
SKIN CONTACT:
SKIN IRRITATION:
SIGNS/SYMPTOMS MAY INCLUDE LOCALIZED REDNESS, SWELLING, ITCHING, DRYNESS,
CRACKING, BLISTERING, AND PAIN.
ALLERGIC SKIN REACTION (NON-PHOTO INDUCED):
SIGNS/SYMPTOMS MAY INCLUDE REDNESS, SWELLING, BLISTERING, AND ITCHING.
EYE CONTACT:
SEVERE EYE IRRITATION:
SIGNS/SYMPTOMS MAY INCLUDE SIGNIFICANT REDNESS, SWELLING, PAIN, TEARING,
CLOUDY APPEARANCE OF THE CORNEA, AND IMPAIRED VISION.
INGESTION: MAY BE HARMFUL IF SWALLOWED.
GASTROINTESTINAL IRRITATION:
SIGNS/SYMPTOMS MAY INCLUDE ABDOMINAL PAIN, STOMACH UPSET, NAUSEA, VOMITING
AND DIARRHEA.
TOXICOLOGICAL DATA:
IF A COMPONENT IS DISCLOSED IN SECTION 3 BUT DOES NOT APPEAR IN A TABLE
BELOW, EITHER NO DATA ARE AVAILABLE FOR THAT ENDPOINT OR THE DATA ARE NOT
SUFFICIENT FOR CLASSIFICATION.
ACUTE TOXICITY:
NAME ROUTE SPECIES VALUE
OVERALL PRODUCT DERMAL NO DATA AVAILABLE; CALCULATED
ATE: >5,000 MG/KG
OVERALL PRODUCT INGESTION NO DATA AVAILABLE; CALCULATED
ATE: 2,000 - 5,000 MG/KG
POLYPROPYLENEGLYCOL- DERMAL RABBIT LD50: >10,200 MG/KG
TRIMERCAPTANETHER
POLYPROPYLENEGLYCOL- INGESTION RAT LD50: 2,600 MG/KG
TRIMERCAPTANETHER
HYDROGENATED TERPHENYL DERMAL RABBIT LD50: 6,800 MG/KG
HYDROGENATED TERPHENYL INHALATION- RAT LC50: >11.1 MG/L
DUST/MIST
(4 HOURS)
HYDROGENATED TERPHENYL INGESTION RAT LD50: >10,000 MG/KG
2,4,6-TRIS- DERMAL RAT LD50: 1,280 MG/KG
((DIMETHYLAMINO)-
METHYL)PHENOL
2,4,6-TRIS- INGESTION RAT LD50: 1,000 MG/KG
((DIMETHYLAMINO)-
METHYL)PHENOL
AMORPHOUS SILICA DERMAL RABBIT LD50: >5,000 MG/KG
AMORPHOUS SILICA INHALATION- RAT LC50: >0.691 MG/L
DUST/MIST
(4 HOURS)
AMORPHOUS SILICA INGESTION RAT LD50: >5,110 MG/KG
BIS[(DIMETHYLAMINO)- INGESTION LD50 ESTIMATED TO BE:
METHYL]PHENOL 300 - 2,000 MG/KG
ORGANOSILANE DERMAL RABBIT LD50: 2,270 MG/KG
ORGANOSILANE INGESTION RAT LD50: 770 MG/KG
ATE = ACUTE TOXICITY ESTIMATE
SKIN CORROSION/IRRITATION:
NAME SPECIES VALUE
OVERALL PRODUCT IN VITRO IRRITANT
DATA
POLYPROPYLENEGLYCOLTRIMERCAPTANETHER RABBIT NO SIGNIFICANT
IRRITATION
HYDROGENATED TERPHENYL RABBIT NO SIGNIFICANT
IRRITATION
2,4,6-TRIS((DIMETHYLAMINO)METHYL)PHENOL RABBIT CORROSIVE
AMORPHOUS SILICA RABBIT NO SIGNIFICANT
IRRITATION
BIS[(DIMETHYLAMINO)METHYL]PHENOL SIMILAR CORROSIVE
COMPOUNDS
ORGANOSILANE RABBIT NO SIGNIFICANT
IRRITATION
SERIOUS EYE DAMAGE/IRRITATION:
NAME SPECIES VALUE
OVERALL PRODUCT IN VITRO SEVERE IRRITANT
DATA
POLYPROPYLENEGLYCOLTRIMERCAPTANETHER RABBIT MILD IRRITANT
HYDROGENATED TERPHENYL RABBIT NO SIGNIFICANT
IRRITATION
2,4,6-TRIS((DIMETHYLAMINO)METHYL)PHENOL RABBIT CORROSIVE
AMORPHOUS SILICA RABBIT NO SIGNIFICANT
IRRITATION
BIS[(DIMETHYLAMINO)METHYL]PHENOL SIMILAR CORROSIVE
COMPOUNDS
ORGANOSILANE RABBIT NO SIGNIFICANT
IRRITATION
SKIN SENSITIZATION:
NAME SPECIES VALUE
POLYPROPYLENEGLYCOLTRIMERCAPTANETHER MOUSE SENSITIZING
HYDROGENATED TERPHENYL HUMAN NOT CLASSIFIED
2,4,6-TRIS((DIMETHYLAMINO)METHYL)PHENOL GUINEA PIG NOT CLASSIFIED
AMORPHOUS SILICA HUMAN AND ANIMAL NOT CLASSIFIED
ORGANOSILANE GUINEA PIG SENSITIZING
RESPIRATORY SENSITIZATION:
FOR THE COMPONENT/COMPONENTS, EITHER NO DATA ARE CURRENTLY AVAILABLE OR THE
DATA ARE NOT SUFFICIENT FOR CLASSIFICATION.
GERM CELL MUTAGENICITY:
NAME ROUTE VALUE
POLYPROPYLENEGLYCOLTRIMERCAPTANETHER IN VITRO NOT MUTAGENIC
HYDROGENATED TERPHENYL IN VIVO NOT MUTAGENIC
2,4,6-TRIS((DIMETHYLAMINO)METHYL)PHENOL IN VITRO NOT MUTAGENIC
AMORPHOUS SILICA IN VITRO NOT MUTAGENIC
ORGANOSILANE IN VITRO NOT MUTAGENIC
CARCINOGENICITY:
NAME ROUTE SPECIES VALUE
AMORPHOUS SILICA NOT SPECIFIED MOUSE SOME POSITIVE DATA EXIST, BUT
THE DATA ARE NOT SUFFICIENT
FOR CLASSIFICATION
REPRODUCTIVE TOXICITY:
REPRODUCTIVE AND/OR DEVELOPMENTAL EFFECTS:
NAME ROUTE VALUE SPECIES TEST RESULT EXPOSURE
DURATION
HYDROGENATED INGESTION NOT CLASSIFIED RAT NOAEL: 81 2
TERPHENYL FOR FEMALE MG/KG/DAY GENERA-
REPRODUCTION TION
HYDROGENATED INGESTION NOT CLASSIFIED RAT NOAEL: 62 2
TERPHENYL FOR MALE MG/KG/DAY GENERA-
REPRODUCTION TION
HYDROGENATED INGESTION NOT CLASSIFIED RAT NOAEL: 2
TERPHENYL FOR 500 GENERA-
DEVELOPMENT MG/KG/DAY TION
AMORPHOUS SILICA INGESTION NOT CLASSIFIED RAT NOAEL: 1
FOR FEMALE 509 GENERA-
REPRODUCTION MG/KG/DAY TION
AMORPHOUS SILICA INGESTION NOT CLASSIFIED RAT NOAEL: 1
FOR MALE 497 GENERA-
REPRODUCTION MG/KG/DAY TION
AMORPHOUS SILICA INGESTION NOT CLASSIFIED RAT NOAEL: DURING
FOR 1,350 ORGANOG-
DEVELOPMENT MG/KG/DAY ENESIS
TARGET ORGAN(S):
SPECIFIC TARGET ORGAN TOXICITY - SINGLE EXPOSURE:
NAME ROUTE TARGET ORGAN(S) VALUE
2,4,6-TRIS- INHALATION RESPIRATORY IRRITATION SOME POSITIVE DATA
((DIMETHYLAMINO)- EXIST, BUT THE DATA
METHYL)PHENOL ARE NOT SUFFICIENT
FOR CLASSIFICATION
NAME SPECIES TEST RESULT EXPOSURE DURATION
2,4,6-TRIS- NOAEL: NOT AVAILABLE
((DIMETHYLAMINO)-
METHYL)PHENOL
SPECIFIC TARGET ORGAN TOXICITY - REPEATED EXPOSURE:
NAME ROUTE TARGET ORGAN(S) VALUE
POLYPROPYLENEGLY- INGESTION HEMATOPOIETIC SYSTEM SOME POSITIVE DATA
COLTRIMER EXIST, BUT THE DATA
CAPTANETHER ARE NOT SUFFICIENT
FOR CLASSIFICATION
POLYPROPYLENEGLY- INGESTION LIVER SOME POSITIVE DATA
COLTRIMER EXIST, BUT THE DATA
CAPTANETHER ARE NOT SUFFICIENT
FOR CLASSIFICATION
POLYPROPYLENEGLY- INGESTION ENDOCRINE SYSTEM | NOT CLASSIFIED
COLTRIMER HEART | SKIN |
CAPTANETHER IMMUNE SYSTEM |
NERVOUS SYSTEM |
EYES | KIDNEY AND/OR
BLADDER | RESPIRATORY
SYSTEM | VASCULAR
SYSTEM
HYDROGENATED INHALATION LIVER NOT CLASSIFIED
TERPHENYL
HYDROGENATED INGESTION ENDOCRINE SYSTEM | NOT CLASSIFIED
TERPHENYL BLOOD | LIVER |
KIDNEY AND/OR BLADDER
2,4,6-TRIS- DERMAL SKIN | LIVER | NOT CLASSIFIED
((DIMETHYLAMINO)- NERVOUS SYSTEM |
METH AUDITORYYL)
PHENOL SYSTEM |
HEMATOPOIETIC
SYSTEM | EYES
AMORPHOUS SILICA INHALATION RESPIRATORY SYSTEM | NOT CLASSIFIED
SILICOSIS
NAME SPECIES TEST RESULT EXPOSURE DURATION
POLYPROPYLENEGLY- RAT NOAEL: 75 MG/KG/DAY 90 DAYS
COLTRIMER
CAPTANETHER
POLYPROPYLENEGLY- RAT NOAEL: 250 MG/KG/DAY 90 DAYS
COLTRIMER
CAPTANETHER
POLYPROPYLENEGLY- RAT NOAEL: 1,000 MG/KG/DAY 90 DAYS
COLTRIMER
CAPTANETHER
HYDROGENATED RAT NOAEL: 0.5 MG/L 90 DAYS
TERPHENYL
HYDROGENATED RAT NOAEL: 144 MG/KG/DAY 14 WEEKS
TERPHENYL
2,4,6-TRIS- RAT NOAEL: 125 MG/KG/DAY 28 DAYS
((DIMETHYLAMINO)-
METH
AMORPHOUS SILICA HUMAN NOAEL: NOT AVAILABLE OCCUPATIONAL EXPOSURE
ASPIRATION HAZARD
FOR THE COMPONENT/COMPONENTS, EITHER NO DATA ARE CURRENTLY AVAILABLE OR THE
DATA ARE NOT SUFFICIENT FOR CLASSIFICATION.
PLEASE CONTACT THE ADDRESS OR PHONE NUMBER LISTED IN SECTION 1 OF THIS
SDS FOR ADDITIONAL TOXICOLOGICAL INFORMATION ON THIS MATERIAL AND/OR
ITS COMPONENTS.
| SECTION 12: ECOLOGICAL INFORMATION | |
ECOTOXICOLOGICAL INFORMATION:
PLEASE CONTACT THE ADDRESS OR PHONE NUMBER LISTED IN SECTION 1 OF THIS
SDS FOR ADDITIONAL ECOTOXICOLOGICAL INFORMATION ON THIS MATERIAL AND/OR
ITS COMPONENTS.
CHEMICAL FATE INFORMATION:
PLEASE CONTACT THE ADDRESS OR PHONE NUMBER LISTED IN SECTION 1 OF THIS
SDS FOR ADDITIONAL CHEMICAL FATE INFORMATION ON THIS MATERIAL AND/OR
ITS COMPONENTS.
| SECTION 13: DISPOSAL CONSIDERATIONS | |
13.1. DISPOSAL METHODS:
DISPOSE OF CONTENTS/CONTAINER IN ACCORDANCE WITH THE
LOCAL/REGIONAL/NATIONAL/INTERNATIONAL REGULATIONS.
DISPOSE OF COMPLETELY CURED (OR POLYMERIZED) MATERIAL IN A PERMITTED
INDUSTRIAL WASTE FACILITY. AS A DISPOSAL ALTERNATIVE, INCINERATE UNCURED
PRODUCT IN A PERMITTED WASTE INCINERATION FACILITY. PROPER DESTRUCTION MAY
REQUIRE THE USE OF ADDITIONAL FUEL DURING INCINERATION PROCESSES. EMPTY
DRUMS/BARRELS/CONTAINERS USED FOR TRANSPORTING AND HANDLING HAZARDOUS
CHEMICALS (CHEMICAL SUBSTANCES/MIXTURES/PREPARATIONS CLASSIFIED AS
HAZARDOUS AS PER APPLICABLE REGULATIONS) SHALL BE CONSIDERED, STORED,
TREATED & DISPOSED OF AS HAZARDOUS WASTES UNLESS OTHERWISE DEFINED BY
APPLICABLE WASTE REGULATIONS. CONSULT WITH THE RESPECTIVE REGULATING
AUTHORITIES TO DETERMINE THE AVAILABLE TREATMENT AND DISPOSAL FACILITIES.
EPA HAZARDOUS WASTE NUMBER (RCRA): NOT REGULATED
| SECTION 14: TRANSPORT INFORMATION | |
FOR TRANSPORT INFORMATION, PLEASE VISIT:
HTTP://3M.COM/TRANSPORTINFO OR CALL 1-800-364-3577 OR 651-737-6501.
| SECTION 15: REGULATORY INFORMATION | |
15.1. US FEDERAL REGULATIONS: CONTACT 3M FOR MORE INFORMATION.
EPCRA 311/312 HAZARD CLASSIFICATIONS:
PHYSICAL HAZARDS: NOT APPLICABLE
HEALTH HAZARDS:
RESPIRATORY OR SKIN SENSITIZATION
SERIOUS EYE DAMAGE OR EYE IRRITATION
SKIN CORROSION OR IRRITATION
15.2. STATE REGULATIONS: CONTACT 3M FOR MORE INFORMATION.
15.3. CHEMICAL INVENTORIES:
THE COMPONENTS OF THIS MATERIAL ARE IN COMPLIANCE WITH THE PROVISIONS OF
THE KOREAN TOXIC CHEMICAL CONTROL LAW. CERTAIN RESTRICTIONS MAY APPLY.
CONTACT THE SELLING DIVISION FOR ADDITIONAL INFORMATION.
THE COMPONENTS OF THIS PRODUCT ARE IN COMPLIANCE WITH THE CHEMICAL
NOTIFICATION REQUIREMENTS OF TSCA. ALL REQUIRED COMPONENTS OF THIS PRODUCT
ARE LISTED ON THE ACTIVE PORTION OF THE TSCA INVENTORY.
CONTACT 3M FOR MORE INFORMATION.
15.4. INTERNATIONAL REGULATIONS: CONTACT 3M FOR MORE INFORMATION.
THIS SDS HAS BEEN PREPARED TO MEET THE U.S. OSHA HAZARD COMMUNICATION
STANDARD, 29 CFR 1910.1200.
| SECTION 16: OTHER INFORMATION | |
NFPA HAZARD CLASSIFICATION:
HEALTH 2
FLAMMABILITY 1
INSTABILITY 1
SPECIAL HAZARDS NONE
NATIONAL FIRE PROTECTION ASSOCIATION (NFPA) HAZARD RATINGS ARE DESIGNED FOR
USE BY EMERGENCY RESPONSE PERSONNEL TO ADDRESS THE HAZARDS THAT ARE
PRESENTED BY SHORT-TERM, ACUTE EXPOSURE TO A MATERIAL UNDER CONDITIONS OF
FIRE, SPILL, OR SIMILAR EMERGENCIES. HAZARD RATINGS ARE PRIMARILY BASED ON
THE INHERENT PHYSICAL AND TOXIC PROPERTIES OF THE MATERIAL BUT ALSO INCLUDE
THE TOXIC PROPERTIES OF COMBUSTION OR DECOMPOSITION PRODUCTS THAT ARE KNOWN
TO BE GENERATED IN SIGNIFICANT QUANTITIES.
DOCUMENT GROUP: 11-2402-3
VERSION NUMBER: 23.02
ISSUE DATE: 01/14/19
SUPERCEDES DATE: 08/13/18
DISCLAIMER:
THE INFORMATION IN THIS SAFETY DATA SHEET (SDS) IS BELIEVED TO BE CORRECT
AS OF THE DATE ISSUED. 3M MAKES NO WARRANTIES, EXPRESSED OR IMPLIED,
INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE OR COURSE OF PERFORMANCE OR USAGE OF
TRADE. USER IS RESPONSIBLE FOR DETERMINING WHETHER THE 3M PRODUCT IS FIT
FOR A PARTICULAR PURPOSE AND SUITABLE FOR USER'S METHOD OF USE OR
APPLICATION. GIVEN THE VARIETY OF FACTORS THAT CAN AFFECT THE USE AND
APPLICATION OF A 3M PRODUCT, SOME OF WHICH ARE UNIQUELY WITHIN THE USER'S
KNOWLEDGE AND CONTROL, IT IS ESSENTIAL THAT THE USER EVALUATE THE 3M
PRODUCT TO DETERMINE WHETHER IT IS FIT FOR A PARTICULAR PURPOSE AND
SUITABLE FOR USER'S METHOD OF USE OR APPLICATION.
3M PROVIDES INFORMATION IN ELECTRONIC FORM AS A SERVICE TO ITS CUSTOMERS.
DUE TO THE REMOTE POSSIBILITY THAT ELECTRONIC TRANSFER MAY HAVE RESULTED IN
ERRORS, OMISSIONS OR ALTERATIONS IN THIS INFORMATION, 3M MAKES NO
REPRESENTATIONS AS TO ITS COMPLETENESS OR ACCURACY. IN ADDITION,
INFORMATION OBTAINED FROM A DATABASE MAY NOT BE AS CURRENT AS THE
INFORMATION IN THE SDS AVAILABLE DIRECTLY FROM 3M
3M USA SDSS ARE AVAILABLE AT WWW.3M.COM