| Common Name: | SUPER-FAST REPAIR ADHESIVE PN 04747 |
| Manufacturer: | 3M |
| SDS Revision Date: | 4/17/2015 |
| SDS Format: | GHS-US |
| Item Number(s): | 2KVB5 |
| Manufacturer Model Number(s): |
SDS Table of Contents
Click the desired link below to jump directly to that section in the SDS.
3M(TM) SUPER-FAST REPAIR ADHESIVE PN 04747
04/17/15
3M
SAFETY DATA SHEET
COPYRIGHT, 2015, 3M COMPANY.
ALL RIGHTS RESERVED. COPYING AND/OR DOWNLOADING OF THIS INFORMATION FOR
THE PURPOSE OF PROPERLY UTILIZING 3M PRODUCTS IS ALLOWED PROVIDED THAT:
(1) THE INFORMATION IS COPIED IN FULL WITH NO CHANGES UNLESS PRIOR WRITTEN
AGREEMENT IS OBTAINED FROM 3M, AND
(2) NEITHER THE COPY NOR THE ORIGINAL IS RESOLD OR OTHERWISE DISTRIBUTED
WITH THE INTENTION OF EARNING A PROFIT THEREON.
DOCUMENT GROUP: 28-1002-6
ISSUE DATE: 04/17/15
VERSION NUMBER: 2.00
SUPERCEDES DATE: 03/04/10
PRODUCT IDENTIFIER: 3M(TM) SUPER-FAST REPAIR ADHESIVE PN 04747
ID NUMBER(S): 41-0003-6764-3, 60-4550-5242-7
RECOMMENDED USE: AUTOMOTIVE
SUPPLIER'S DETAILS:
MANUFACTURER: 3M
DIVISION: AUTOMOTIVE AFTERMARKET
ADDRESS:
3M CENTER
ST. PAUL, MN 55144-1000
USA
TELEPHONE: 1-888-3M HELPS (1-888-364-3577)
EMERGENCY TELEPHONE NUMBER: 1-800-364-3577 OR (651) 737-6501 (24 HOURS)
THIS PRODUCT IS A KIT OR A MULTIPART PRODUCT WHICH CONSISTS OF MULTIPLE,
INDEPENDENTLY PACKAGED COMPONENTS. A SAFETY DATA SHEET (SDS), ARTICLE
INFORMATION SHEET (AIS), OR ARTICLE INFORMATION LETTER (AIL) FOR EACH OF
THESE COMPONENTS IS INCLUDED. PLEASE DO NOT SEPARATE THE COMPONENT
DOCUMENTS FROM THIS COVER SHEET.
THE DOCUMENT NUMBERS FOR COMPONENTS OF THIS PRODUCT ARE:
22-1807-1, 22-1870-9
DISCLAIMER:
THE INFORMATION IN THIS SAFETY DATA SHEET (SDS) IS BELIEVED TO BE CORRECT
AS OF THE DATE ISSUED. 3M MAKES NO WARRANTIES, EXPRESSED OR IMPLIED,
INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE OR COURSE OF PERFORMANCE OR USAGE OF
TRADE. USER IS RESPONSIBLE FOR DETERMINING WHETHER THE 3M PRODUCT IS FIT
FOR A PARTICULAR PURPOSE AND SUITABLE FOR USER'S METHOD OF USE OR
APPLICATION. GIVEN THE VARIETY OF FACTORS THAT CAN AFFECT THE USE AND
APPLICATION OF A 3M PRODUCT, SOME OF WHICH ARE UNIQUELY WITHIN THE USER'S
KNOWLEDGE AND CONTROL, IT IS ESSENTIAL THAT THE USER EVALUATE THE 3M
PRODUCT TO DETERMINE WHETHER IT IS FIT FOR A PARTICULAR PURPOSE AND
SUITABLE FOR USER'S METHOD OF USE OR APPLICATION.
3M PROVIDES INFORMATION IN ELECTRONIC FORM AS A SERVICE TO ITS CUSTOMERS.
DUE TO THE REMOTE POSSIBILITY THAT ELECTRONIC TRANSFER MAY HAVE RESULTED
IN ERRORS, OMISSIONS OR ALTERATIONS IN THIS INFORMATION, 3M MAKES NO
REPRESENTATIONS AS TO ITS COMPLETENESS OR ACCURACY. IN ADDITION,
INFORMATION OBTAINED FROM A DATABASE MAY NOT BE AS CURRENT AS THE
INFORMATION IN THE SDS AVAILABLE DIRECTLY FROM 3M
3M USA SDSS ARE AVAILABLE AT WWW.3M.COM
3M(TM) SUPER-FAST REPAIR ADHESIVE PN 04747 - PART A
12/01/15
3M
SAFETY DATA SHEET
COPYRIGHT, 2015, 3M COMPANY.
ALL RIGHTS RESERVED. COPYING AND/OR DOWNLOADING OF THIS INFORMATION FOR
THE PURPOSE OF PROPERLY UTILIZING 3M PRODUCTS IS ALLOWED PROVIDED THAT:
(1) THE INFORMATION IS COPIED IN FULL WITH NO CHANGES UNLESS PRIOR WRITTEN
AGREEMENT IS OBTAINED FROM 3M, AND
(2) NEITHER THE COPY NOR THE ORIGINAL IS RESOLD OR OTHERWISE DISTRIBUTED
WITH THE INTENTION OF EARNING A PROFIT THEREON.
DOCUMENT GROUP: 22-1807-1
ISSUE DATE: 12/01/15
VERSION NUMBER: 6.02
SUPERCEDES DATE: 11/24/15
| SECTION 1: IDENTIFICATION |  |
1.1. PRODUCT IDENTIFIER:
3M(TM) SUPER-FAST REPAIR ADHESIVE PN 04747 - PART A
PRODUCT IDENTIFICATION NUMBERS: LB-K100-0780-5, LA-D100-0021-7
1.2. RECOMMENDED USE AND RESTRICTIONS ON USE:
RECOMMENDED USE: TWO-PART URETHANE SYSTEM., INDUSTRIAL USE
1.3. SUPPLIER'S DETAILS:
MANUFACTURER: 3M
DIVISION: AUTOMOTIVE AFTERMARKET
ADDRESS:
3M CENTER
ST. PAUL, MN 55144-1000
USA
TELEPHONE: 1-888-3M HELPS (1-888-364-3577)
1.4. EMERGENCY TELEPHONE NUMBER:
1-800-364-3577 OR (651) 737-6501 (24 HOURS)
| SECTION 2: HAZARD IDENTIFICATION | |
THE LABEL ELEMENTS BELOW WERE PREPARED IN ACCORDANCE WITH OSHA HAZARD
COMMUNICATION STANDARD, 29 CFR 1910.1200. THIS INFORMATION MAY BE DIFFERENT
FROM THE ACTUAL PRODUCT LABEL INFORMATION FOR LABELS REGULATED BY OTHER
AGENCIES.
2.1. HAZARD CLASSIFICATION:
ACUTE TOXICITY (INHALATION): CATEGORY 3.
SERIOUS EYE DAMAGE/IRRITATION: CATEGORY 2A.
SKIN CORROSION/IRRITATION: CATEGORY 2.
RESPIRATORY SENSITIZER: CATEGORY 1.
SKIN SENSITIZER: CATEGORY 1.
SPECIFIC TARGET ORGAN TOXICITY (RESPIRATORY IRRITATION): CATEGORY 3.
SPECIFIC TARGET ORGAN TOXICITY (REPEATED EXPOSURE): CATEGORY 1.
2.2. LABEL ELEMENTS:
SIGNAL WORD: DANGER
SYMBOLS:
SKULL AND CROSSBONES
EXCLAMATION MARK
HEALTH HAZARD
PICTOGRAMS:
SKULL AND CROSSBONES
EXCLAMATION MARK
HEALTH HAZARD
HAZARD STATEMENTS:
TOXIC IF INHALED.
CAUSES SERIOUS EYE IRRITATION.
CAUSES SKIN IRRITATION.
MAY CAUSE ALLERGY OR ASTHMA SYMPTOMS OR BREATHING DIFFICULTIES IF INHALED.
MAY CAUSE AN ALLERGIC SKIN REACTION.
MAY CAUSE RESPIRATORY IRRITATION.
CAUSES DAMAGE TO ORGANS THROUGH PROLONGED OR REPEATED EXPOSURE:
RESPIRATORY SYSTEM
PRECAUTIONARY STATEMENTS:
PREVENTION:
DO NOT BREATHE DUST/FUME/GAS/MIST/VAPORS/SPRAY.
USE ONLY OUTDOORS OR IN A WELL-VENTILATED AREA.
IN CASE OF INADEQUATE VENTILATION WEAR RESPIRATORY PROTECTION.
WEAR EYE/FACE PROTECTION.
WEAR PROTECTIVE GLOVES.
DO NOT EAT, DRINK OR SMOKE WHEN USING THIS PRODUCT.
WASH THOROUGHLY AFTER HANDLING.
CONTAMINATED WORK CLOTHING MUST NOT BE ALLOWED OUT OF THE WORKPLACE.
RESPONSE:
IF INHALED: REMOVE PERSON TO FRESH AIR AND KEEP COMFORTABLE FOR BREATHING.
IF INHALED:
IF BREATHING IS DIFFICULT, REMOVE PERSON TO FRESH AIR AND KEEP COMFORTABLE
FOR BREATHING.
IF EXPERIENCING RESPIRATORY SYMPTOMS:
CALL A POISON CENTER OR DOCTOR/PHYSICIAN.
IF IN EYES:
RINSE CAUTIOUSLY WITH WATER FOR SEVERAL MINUTES. REMOVE CONTACT LENSES, IF
PRESENT AND EASY TO DO.
CONTINUE RINSING.
IF EYE IRRITATION PERSISTS: GET MEDICAL ADVICE/ATTENTION.
IF ON SKIN: WASH WITH PLENTY OF SOAP AND WATER.
IF SKIN IRRITATION OR RASH OCCURS: GET MEDICAL ADVICE/ATTENTION.
TAKE OFF CONTAMINATED CLOTHING AND WASH IT BEFORE REUSE.
CALL A POISON CENTER OR DOCTOR/PHYSICIAN.
GET MEDICAL ADVICE/ATTENTION IF YOU FEEL UNWELL.
STORAGE:
STORE IN A WELL-VENTILATED PLACE. KEEP CONTAINER TIGHTLY CLOSED.
STORE LOCKED UP.
DISPOSAL:
DISPOSE OF CONTENTS/CONTAINER IN ACCORDANCE WITH APPLICABLE
LOCAL/REGIONAL/NATIONAL/INTERNATIONAL REGULATIONS.
2.3. HAZARDS NOT OTHERWISE CLASSIFIED:
PERSONS PREVIOUSLY SENSITIZED TO ISOCYANATES MAY DEVELOP A
CROSS-SENSITIZATION REACTION TO OTHER ISOCYANATES.
23% OF THE MIXTURE CONSISTS OF INGREDIENTS OF UNKNOWN ACUTE ORAL TOXICITY.
23% OF THE MIXTURE CONSISTS OF INGREDIENTS OF UNKNOWN ACUTE DERMAL
TOXICITY.
24% OF THE MIXTURE CONSISTS OF INGREDIENTS OF UNKNOWN ACUTE INHALATION
TOXICITY.
| SECTION 3: COMPOSITION/INFORMATION ON INGREDIENTS | |
INGREDIENT C.A.S. NO. % BY WT
P,P'-METHYLENEBIS(PHENYL ISOCYANATE) 101-68-8 30 - 60 TRADE SECRET *
CASTOR OIL, POLYMER WITH 1,1'- 68424-09-9 15 - 40 TRADE SECRET *
METHYLENEBIS[4-ISOCYANATOBENZENE]
4,4'-DIISOCYANATODIPHENYLMETHANE 25686-28-6 10 - 30 TRADE SECRET *
POLYMER
3-(TRIMETHOXYSILYL)PROPYL GLYCIDYL 2530-83-8 1 - 5 TRADE SECRET *
ETHER
*THE SPECIFIC CHEMICAL IDENTITY AND/OR EXACT PERCENTAGE (CONCENTRATION) OF
THIS COMPOSITION HAS BEEN WITHHELD AS A TRADE SECRET.
| SECTION 4: FIRST AID MEASURES | |
4.1. DESCRIPTION OF FIRST AID MEASURES:
INHALATION: REMOVE PERSON TO FRESH AIR. GET MEDICAL ATTENTION.
SKIN CONTACT:
IMMEDIATELY WASH WITH SOAP AND WATER. REMOVE CONTAMINATED CLOTHING AND WASH
BEFORE REUSE. IF SIGNS/SYMPTOMS DEVELOP, GET MEDICAL ATTENTION.
EYE CONTACT:
IMMEDIATELY FLUSH WITH LARGE AMOUNTS OF WATER. REMOVE CONTACT LENSES IF
EASY TO DO. CONTINUE RINSING. GET MEDICAL ATTENTION.
IF SWALLOWED: RINSE MOUTH. IF YOU FEEL UNWELL, GET MEDICAL ATTENTION.
4.2. MOST IMPORTANT SYMPTOMS AND EFFECTS, BOTH ACUTE AND DELAYED:
SEE SECTION 11.1. INFORMATION ON TOXICOLOGICAL EFFECTS.
4.3. INDICATION OF ANY IMMEDIATE MEDICAL ATTENTION AND SPECIAL TREATMENT
REQUIRED: NOT APPLICABLE
| SECTION 5: FIRE-FIGHTING MEASURES | |
5.1. SUITABLE EXTINGUISHING MEDIA:
IN CASE OF FIRE:
USE A FIRE FIGHTING AGENT SUITABLE FOR ORDINARY COMBUSTIBLE MATERIAL SUCH
AS WATER OR FOAM TO EXTINGUISH.
5.2. SPECIAL HAZARDS ARISING FROM THE SUBSTANCE OR MIXTURE:
NONE INHERENT IN THIS PRODUCT.
HAZARDOUS DECOMPOSITION OR BY-PRODUCTS:
SUBSTANCE CONDITION
CARBON MONOXIDE DURING COMBUSTION
CARBON DIOXIDE DURING COMBUSTION
HYDROGEN CYANIDE DURING COMBUSTION
OXIDES OF NITROGEN DURING COMBUSTION
TOXIC VAPOR, GAS, PARTICULATE DURING COMBUSTION
5.3. SPECIAL PROTECTIVE ACTIONS FOR FIRE-FIGHTERS:
NO SPECIAL PROTECTIVE ACTIONS FOR FIRE-FIGHTERS ARE ANTICIPATED.
| SECTION 6: ACCIDENTAL RELEASE MEASURES | |
6.1. PERSONAL PRECAUTIONS, PROTECTIVE EQUIPMENT AND EMERGENCY PROCEDURES:
EVACUATE AREA. VENTILATE THE AREA WITH FRESH AIR. FOR LARGE SPILL, OR
SPILLS IN CONFINED SPACES, PROVIDE MECHANICAL VENTILATION TO DISPERSE OR
EXHAUST VAPORS, IN ACCORDANCE WITH GOOD INDUSTRIAL HYGIENE PRACTICE.
6.2. ENVIRONMENTAL PRECAUTIONS:
AVOID RELEASE TO THE ENVIRONMENT. FOR LARGER SPILLS, COVER DRAINS AND BUILD
DIKES TO PREVENT ENTRY INTO SEWER SYSTEMS OR BODIES OF WATER.
6.3. METHODS AND MATERIAL FOR CONTAINMENT AND CLEANING UP:
CONTAIN SPILL. POUR ISOCYANATE DECONTAMINANT SOLUTION (90% WATER, 8%
CONCENTRATED AMMONIA, 2% DETERGENT) ON SPILL AND ALLOW TO REACT FOR 10
MINUTES. OR POUR WATER ON SPILL AND ALLOW TO REACT FOR MORE THAN 30
MINUTES. COVER WITH ABSORBENT MATERIAL. WORKING FROM AROUND THE EDGES OF
THE SPILL INWARD, COVER WITH BENTONITE, VERMICULITE, OR COMMERCIALLY
AVAILABLE INORGANIC ABSORBENT MATERIAL. MIX IN SUFFICIENT ABSORBENT UNTIL
IT APPEARS DRY. REMEMBER, ADDING AN ABSORBENT MATERIAL DOES NOT REMOVE A
PHYSICAL, HEALTH, OR ENVIRONMENTAL HAZARD. COLLECT AS MUCH OF THE SPILLED
MATERIAL AS POSSIBLE. PLACE IN A CONTAINER APPROVED FOR TRANSPORTATION BY
APPROPRIATE AUTHORITIES, BUT DO NOT SEAL THE CONTAINER FOR 48 HOURS TO
AVOID PRESSURE BUILD-UP. CLEAN UP RESIDUE WITH AN APPROPRIATE SOLVENT
SELECTED BY A QUALIFIED AND AUTHORIZED PERSON. VENTILATE THE AREA WITH
FRESH AIR. READ AND FOLLOW SAFETY PRECAUTIONS ON THE SOLVENT LABEL AND SDS.
DISPOSE OF COLLECTED MATERIAL AS SOON AS POSSIBLE.
| SECTION 7: HANDLING AND STORAGE | |
7.1. PRECAUTIONS FOR SAFE HANDLING:
DO NOT USE IN A CONFINED AREA WITH MINIMAL AIR EXCHANGE. DO NOT BREATHE
DUST/FUME/GAS/MIST/VAPORS/SPRAY. DO NOT GET IN EYES, ON SKIN, OR ON
CLOTHING. DO NOT EAT, DRINK OR SMOKE WHEN USING THIS PRODUCT. WASH
THOROUGHLY AFTER HANDLING. CONTAMINATED WORK CLOTHING SHOULD NOT BE
ALLOWED OUT OF THE WORKPLACE. WASH CONTAMINATED CLOTHING BEFORE REUSE.
7.2. CONDITIONS FOR SAFE STORAGE INCLUDING ANY INCOMPATIBILITIES:
STORE IN A WELL-VENTILATED PLACE. KEEP CONTAINER TIGHTLY CLOSED TO PREVENT
CONTAMINATION WITH WATER OR AIR. IF CONTAMINATION IS SUSPECTED, DO NOT
RESEAL CONTAINER. STORE AWAY FROM ACIDS. STORE AWAY FROM STRONG BASES.
| SECTION 8: EXPOSURE CONTROLS/PERSONAL PROTECTION | |
8.1. CONTROL PARAMETERS:
OCCUPATIONAL EXPOSURE LIMITS:
IF A COMPONENT IS DISCLOSED IN SECTION 3 BUT DOES NOT APPEAR IN THE TABLE
BELOW, AN OCCUPATIONAL EXPOSURE LIMIT IS NOT AVAILABLE FOR THE COMPONENT.
INGREDIENT C.A.S. NO. AGENCY LIMIT TYPE ADDITIONAL
COMMENTS
FREE 101-68-8 MANUFACTURER TWA: 0.005 PPM
ISOCYANATES DETERMINED STEL: 0.02 PPM
P,P'-METHYLENE- 101-68-8 ACGIH TWA: 0.005 PPM
BIS(PHENYL
ISOCYANATE)
P,P'-METHYLENE- 101-68-8 OSHA CEIL:
BIS(PHENYL 0.2 MG/M3
ISOCYANATE) (0.02 PPM)
3-(TRIMETHOXY- 2530-83-8 CMRG TWA: 5 PPM
SILYL)PROPYL
GLYCIDYL ETHER
ACGIH: AMERICAN CONFERENCE OF GOVERNMENTAL INDUSTRIAL HYGIENISTS
AIHA: AMERICAN INDUSTRIAL HYGIENE ASSOCIATION
CMRG: CHEMICAL MANUFACTURER'S RECOMMENDED GUIDELINES
OSHA:
UNITED STATES DEPARTMENT OF LABOR - OCCUPATIONAL SAFETY AND HEALTH
ADMINISTRATION
TWA: TIME-WEIGHTED-AVERAGE
STEL: SHORT TERM EXPOSURE LIMIT
CEIL: CEILING
8.2. EXPOSURE CONTROLS:
8.2.1. ENGINEERING CONTROLS:
PROVIDE APPROPRIATE LOCAL EXHAUST VENTILATION FOR CUTTING, GRINDING,
SANDING OR MACHINING. USE GENERAL DILUTION VENTILATION AND/OR LOCAL EXHAUST
VENTILATION TO CONTROL AIRBORNE EXPOSURES TO BELOW RELEVANT EXPOSURE LIMITS
AND/OR CONTROL DUST/FUME/GAS/MIST/VAPORS/SPRAY. IF VENTILATION IS NOT
ADEQUATE, USE RESPIRATORY PROTECTION EQUIPMENT.
8.2.2. PERSONAL PROTECTIVE EQUIPMENT (PPE):
EYE/FACE PROTECTION:
SELECT AND USE EYE/FACE PROTECTION TO PREVENT CONTACT BASED ON THE RESULTS
OF AN EXPOSURE ASSESSMENT.
THE FOLLOWING EYE/FACE PROTECTION(S) ARE RECOMMENDED:
INDIRECT VENTED GOGGLES
SKIN/HAND PROTECTION:
SELECT AND USE GLOVES AND/OR PROTECTIVE CLOTHING APPROVED TO RELEVANT LOCAL
STANDARDS TO PREVENT SKIN CONTACT BASED ON THE RESULTS OF AN EXPOSURE
ASSESSMENT. SELECTION SHOULD BE BASED ON USE FACTORS SUCH AS EXPOSURE
LEVELS, CONCENTRATION OF THE SUBSTANCE OR MIXTURE, FREQUENCY AND DURATION,
PHYSICAL CHALLENGES SUCH AS TEMPERATURE EXTREMES, AND OTHER USE CONDITIONS.
CONSULT WITH YOUR GLOVE AND/OR PROTECTIVE CLOTHING MANUFACTURER FOR
SELECTION OF APPROPRIATE COMPATIBLE GLOVES/PROTECTIVE CLOTHING.
GLOVES MADE FROM THE FOLLOWING MATERIAL(S) ARE RECOMMENDED:
BUTYL RUBBER
NITRILE RUBBER
IF THIS PRODUCT IS USED IN A MANNER THAT PRESENTS A HIGHER POTENTIAL FOR
EXPOSURE (EG. SPRAYING, HIGH SPLASH POTENTIAL ETC.), THEN USE OF PROTECTIVE
COVERALLS MAY BE NECESSARY. SELECT AND USE BODY PROTECTION TO PREVENT
CONTACT BASED ON THE RESULTS OF AN EXPOSURE ASSESSMENT.
THE FOLLOWING PROTECTIVE CLOTHING MATERIAL(S) ARE RECOMMENDED:
APRON - NITRILE
RESPIRATORY PROTECTION:
IN CASE OF INADEQUATE VENTILATION WEAR RESPIRATORY PROTECTION. AN EXPOSURE
ASSESSMENT MAY BE NEEDED TO DECIDE IF A RESPIRATOR IS REQUIRED. IF A
RESPIRATOR IS NEEDED, USE RESPIRATORS AS PART OF A FULL RESPIRATORY
PROTECTION PROGRAM. BASED ON THE RESULTS OF THE EXPOSURE ASSESSMENT, SELECT
FROM THE FOLLOWING RESPIRATOR TYPE(S) TO REDUCE INHALATION EXPOSURE:
HALF FACEPIECE OR FULL FACEPIECE AIR-PURIFYING RESPIRATOR SUITABLE FOR
ORGANIC VAPORS AND PARTICULATES
FOR QUESTIONS ABOUT SUITABILITY FOR A SPECIFIC APPLICATION, CONSULT WITH
YOUR RESPIRATOR MANUFACTURER.
| SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES | |
9.1. INFORMATION ON BASIC PHYSICAL AND CHEMICAL PROPERTIES:
GENERAL PHYSICAL FORM: LIQUID
SPECIFIC PHYSICAL FORM: VISCOUS
ODOR, COLOR, GRADE: LOW OR NO DETECTABLE ODOR, CLEAR.
ODOR THRESHOLD: NO DATA AVAILABLE
PH: NOT APPLICABLE
MELTING POINT: NO DATA AVAILABLE
BOILING POINT: >=400 DEG. F
FLASH POINT: >=290 DEG. F [TEST METHOD: TAGLIABUE CLOSED CUP]
EVAPORATION RATE: <=1 [DETAILS: GELS WITH EXPOSURE TO HUMIDITY.]
FLAMMABILITY (SOLID, GAS): NOT APPLICABLE
FLAMMABLE LIMITS(LEL): NOT APPLICABLE
FLAMMABLE LIMITS(UEL): NOT APPLICABLE
VAPOR PRESSURE: <=0.000004 MMHg [@ 68 DEG. F]
VAPOR DENSITY: >=1 [REF STD: AIR=1]
DENSITY: 1.1 G/ML
SPECIFIC GRAVITY: 1.1 [REF STD: WATER=1]
SOLUBILITY IN WATER: NEGLIGIBLE
SOLUBILITY- NON-WATER: NO DATA AVAILABLE
PARTITION COEFFICIENT N-OCTANOL/WATER: NO DATA AVAILABLE
AUTOIGNITION TEMPERATURE: NOT APPLICABLE
DECOMPOSITION TEMPERATURE: NO DATA AVAILABLE
VISCOSITY: 1,000 - 2,000 CENTIPOISE
HAZARDOUS AIR POLLUTANTS: 42.133 LB HAPS/LB SOLIDS
MOLECULAR WEIGHT: NO DATA AVAILABLE
VOLATILE ORGANIC COMPOUNDS:
22 G/L [TEST METHOD: CALCULATED SCAQMD RULE 443.1]
VOLATILE ORGANIC COMPOUNDS:
2.0% WEIGHT [TEST METHOD: CALCULATED PER CARB TITLE 2]
PERCENT VOLATILE: 2.0% WEIGHT [TEST METHOD: ESTIMATED]
VOC LESS H2O & EXEMPT SOLVENTS:
22 G/L [TEST METHOD: CALCULATED SCAQMD RULE 443.1]
| SECTION 10: STABILITY AND REACTIVITY | |
10.1. REACTIVITY:
THIS MATERIAL MAY BE REACTIVE WITH CERTAIN AGENTS UNDER CERTAIN
CONDITIONS - SEE THE REMAINING HEADINGS IN THIS SECTION.
10.2. CHEMICAL STABILITY: STABLE.
10.3. POSSIBILITY OF HAZARDOUS REACTIONS:
HAZARDOUS POLYMERIZATION WILL NOT OCCUR.
10.4. CONDITIONS TO AVOID: NONE KNOWN.
10.5. INCOMPATIBLE MATERIALS:
WATER
STRONG ACIDS
STRONG BASES
10.6. HAZARDOUS DECOMPOSITION PRODUCTS:
SUBSTANCE CONDITION
NONE KNOWN.
REFER TO SECTION 5.2 FOR HAZARDOUS DECOMPOSITION PRODUCTS DURING
COMBUSTION.
| SECTION 11: TOXICOLOGICAL INFORMATION | |
THE INFORMATION BELOW MAY NOT BE CONSISTENT WITH THE MATERIAL
CLASSIFICATION IN SECTION 2 IF SPECIFIC INGREDIENT CLASSIFICATIONS ARE
MANDATED BY A COMPETENT AUTHORITY. IN ADDITION, TOXICOLOGICAL DATA ON
INGREDIENTS MAY NOT BE REFLECTED IN THE MATERIAL CLASSIFICATION AND/OR THE
SIGNS AND SYMPTOMS OF EXPOSURE, BECAUSE AN INGREDIENT MAY BE PRESENT BELOW
THE THRESHOLD FOR LABELING, AN INGREDIENT MAY NOT BE AVAILABLE FOR
EXPOSURE, OR THE DATA MAY NOT BE RELEVANT TO THE MATERIAL AS A WHOLE.
11.1. INFORMATION ON TOXICOLOGICAL EFFECTS:
SIGNS AND SYMPTOMS OF EXPOSURE:
BASED ON TEST DATA AND/OR INFORMATION ON THE COMPONENTS, THIS MATERIAL MAY
PRODUCE THE FOLLOWING HEALTH EFFECTS:
INHALATION: TOXIC IF INHALED.
RESPIRATORY TRACT IRRITATION:
SIGNS/SYMPTOMS MAY INCLUDE COUGH, SNEEZING, NASAL DISCHARGE, HEADACHE,
HOARSENESS, AND NOSE AND THROAT PAIN.
ALLERGIC RESPIRATORY REACTION:
SIGNS/SYMPTOMS MAY INCLUDE DIFFICULTY BREATHING, WHEEZING, COUGH, AND
TIGHTNESS OF CHEST.
DUST FROM CUTTING, GRINDING, SANDING OR MACHINING MAY CAUSE IRRITATION OF
THE RESPIRATORY SYSTEM. SIGNS/SYMPTOMS MAY INCLUDE COUGH, SNEEZING, NASAL
DISCHARGE, HEADACHE, HOARSENESS, AND NOSE AND THROAT PAIN.
MAY CAUSE TARGET ORGAN EFFECTS AFTER INHALATION. MAY CAUSE ADDITIONAL
HEALTH EFFECTS (SEE BELOW).
SKIN CONTACT:
SKIN IRRITATION:
SIGNS/SYMPTOMS MAY INCLUDE LOCALIZED REDNESS, SWELLING, ITCHING, DRYNESS,
CRACKING, BLISTERING, AND PAIN.
ALLERGIC SKIN REACTION (NON-PHOTO INDUCED):
SIGNS/SYMPTOMS MAY INCLUDE REDNESS, SWELLING, BLISTERING, AND ITCHING.
EYE CONTACT:
SEVERE EYE IRRITATION:
SIGNS/SYMPTOMS MAY INCLUDE SIGNIFICANT REDNESS, SWELLING, PAIN, TEARING,
CLOUDY APPEARANCE OF THE CORNEA, AND IMPAIRED VISION.
INGESTION:
GASTROINTESTINAL IRRITATION:
SIGNS/SYMPTOMS MAY INCLUDE ABDOMINAL PAIN, STOMACH UPSET, NAUSEA, VOMITING
AND DIARRHEA.
ADDITIONAL HEALTH EFFECTS:
PROLONGED OR REPEATED EXPOSURE MAY CAUSE TARGET ORGAN EFFECTS:
RESPIRATORY EFFECTS:
SIGNS/SYMPTOMS MAY INCLUDE COUGH, SHORTNESS OF BREATH, CHEST TIGHTNESS,
WHEEZING, INCREASED HEART RATE, BLUISH COLORED SKIN (CYANOSIS), SPUTUM
PRODUCTION, CHANGES IN LUNG FUNCTION TESTS, AND/OR RESPIRATORY FAILURE.
ADDITIONAL INFORMATION:
PERSONS PREVIOUSLY SENSITIZED TO ISOCYANATES MAY DEVELOP A
CROSS-SENSITIZATION REACTION TO OTHER ISOCYANATES.
TOXICOLOGICAL DATA:
IF A COMPONENT IS DISCLOSED IN SECTION 3 BUT DOES NOT APPEAR IN A TABLE
BELOW, EITHER NO DATA ARE AVAILABLE FOR THAT ENDPOINT OR THE DATA ARE NOT
SUFFICIENT FOR CLASSIFICATION.
ACUTE TOXICITY:
NAME ROUTE SPECIES VALUE
OVERALL PRODUCT DERMAL NO DATA AVAILABLE;
CALCULATED ATE: >5,000 MG/KG
OVERALL PRODUCT INHALATION- NO DATA AVAILABLE;
VAPOR(4 HR) CALCULATED ATE: 2 - 10 MG/L
OVERALL PRODUCT INGESTION NO DATA AVAILABLE;
CALCULATED ATE: >5,000 MG/KG
P,P'-METHYLENE- INHALATION- LC50:
BIS(PHENYL VAPOR ESTIMATED TO BE
ISOCYANATE) 10 - 20 MG/L
P,P'-METHYLENE- DERMAL RABBIT LD50: >5,000 MG/KG
BIS(PHENYL
ISOCYANATE)
P,P'-METHYLENE- INHALATION- RAT LC50: 0.369 MG/L
BIS(PHENYL DUST/MIST
ISOCYANATE) (4 HOURS)
P,P'-METHYLENE- INGESTION RAT LD50: 31,600 MG/KG
BIS(PHENYL
ISOCYANATE)
4,4'-DIISOCYA- INHALATION- LC50:
NATODIPHENYL- VAPOR ESTIMATED TO BE
METHANE POLYMER 10 - 20 MG/L
4,4'-DIISOCYA- DERMAL RABBIT LD50: >5,000 MG/KG
NATODIPHENYL-
METHANE POLYMER
4,4'-DIISOCYA- INHALATION- RAT LC50: 0.369 MG/L
NATODIPHENYL- DUST/MIST
METHANE POLYMER (4 HOURS)
4,4'-DIISOCYA- INGESTION RAT LD50: 31,600 MG/KG
NATODIPHENYL-
METHANE POLYMER
3-(TRIMETHO- DERMAL RABBIT LD50: 4,000 MG/KG
XYSILYL)PROPYL
GLYCIDYL ETHER
3-(TRIMETHO- INHALATION- RAT LC50: >5.3 MG/L
XYSILYL)PROPYL DUST/MIST
GLYCIDYL ETHER (4 HOURS)
3-(TRIMETHO- INGESTION RAT LD50: 7,010 MG/KG
XYSILYL)PROPYL
GLYCIDYL ETHER
ATE = ACUTE TOXICITY ESTIMATE
SKIN CORROSION/IRRITATION:
NAME SPECIES VALUE
P,P'-METHYLENEBIS(PHENYL ISOCYANATE) OFFICIAL IRRITANT
CLASSIFICATION
4,4'-DIISOCYANATODIPHENYLMETHANE OFFICIAL IRRITANT
POLYMER CLASSIFICATION
3-(TRIMETHOXYSILYL)PROPYL GLYCIDYL RABBIT MILD IRRITANT
ETHER
SERIOUS EYE DAMAGE/IRRITATION:
NAME SPECIES VALUE
P,P'-METHYLENEBIS(PHENYL ISOCYANATE) OFFICIAL SEVERE IRRITANT
CLASSIFICATION
4,4'-DIISOCYANATODIPHENYLMETHANE OFFICIAL SEVERE IRRITANT
POLYMER CLASSIFICATION
3-(TRIMETHOXYSILYL)PROPYL GLYCIDYL RABBIT CORROSIVE
ETHER
SKIN SENSITIZATION:
NAME SPECIES VALUE
P,P'-METHYLENEBIS(PHENYL ISOCYANATE) OFFICIAL SENSITIZING
CLASSIFICATION
4,4'-DIISOCYANATODIPHENYLMETHANE OFFICIAL SENSITIZING
POLYMER CLASSIFICATION
3-(TRIMETHOXYSILYL)PROPYL GLYCIDYL GUINEA SOME POSITIVE DATA
ETHER PIG EXIST, BUT THE
DATA ARE NOT
SUFFICIENT FOR
CLASSIFICATION
RESPIRATORY SENSITIZATION:
NAME SPECIES VALUE
P,P'-METHYLENEBIS(PHENYL ISOCYANATE) HUMAN SENSITIZING
4,4'-DIISOCYANATODIPHENYLMETHANE POLYMER HUMAN SENSITIZING
GERM CELL MUTAGENICITY:
NAME ROUTE VALUE
P,P'-METHYLENEBIS(PHENYL IN VITRO SOME POSITIVE DATA EXIST, BUT
ISOCYANATE) THE DATA ARE NOT SUFFICIENT FOR
CLASSIFICATION
4,4'-DIISOCYANATODIPHENYL- IN VITRO SOME POSITIVE DATA EXIST, BUT
METHANE POLYMER THE DATA ARE NOT SUFFICIENT FOR
CLASSIFICATION
3-(TRIMETHOXYSILYL)PROPYL IN VIVO NOT MUTAGENIC
GLYCIDYL ETHER
3-(TRIMETHOXYSILYL)PROPYL IN VITRO SOME POSITIVE DATA EXIST, BUT
GLYCIDYL ETHER THE DATA ARE NOT SUFFICIENT FOR
CLASSIFICATION
CARCINOGENICITY:
NAME ROUTE SPECIES VALUE
P,P'-METHYLENEBIS INHALATION RAT SOME POSITIVE DATA EXIST, BUT
(PHENYL ISOCYANATE) THE DATA ARE NOT SUFFICIENT
FOR CLASSIFICATION
4,4'-DIISOCYANATO- INHALATION RAT SOME POSITIVE DATA EXIST, BUT
DIPHENYLMETHANE THE DATA ARE NOT SUFFICIENT
POLYMER FOR CLASSIFICATION
3-(TRIMETHOXYSILYL) DERMAL MOUSE NOT CARCINOGENIC
PROPYL GLYCIDYL
ETHER
REPRODUCTIVE TOXICITY:
REPRODUCTIVE AND/OR DEVELOPMENTAL EFFECTS:
NAME ROUTE VALUE
P,P'-METHYLENEBIS(PHENYL INHALATION SOME POSITIVE DEVELOPMENTAL DATA
ISOCYANATE) EXIST, BUT THE DATA ARE NOT
SUFFICIENT FOR CLASSIFICATION
4,4'-DIISOCYANATODIPHENYL- INHALATION SOME POSITIVE DEVELOPMENTAL DATA
METHANE POLYMER EXIST, BUT THE DATA ARE NOT
SUFFICIENT FOR CLASSIFICATION
3-(TRIMETHOXYSILYL)PROPYL INGESTION NOT TOXIC TO FEMALE REPRODUCTION
GLYCIDYL ETHER
3-(TRIMETHOXYSILYL)PROPYL INGESTION NOT TOXIC TO MALE REPRODUCTION
GLYCIDYL ETHER
3-(TRIMETHOXYSILYL)PROPYL INGESTION SOME POSITIVE DEVELOPMENTAL DATA
GLYCIDYL ETHER EXIST, BUT THE DATA ARE NOT
SUFFICIENT FOR CLASSIFICATION
NAME SPECIES TEST RESULT EXPOSURE DURATION
P,P'-METHYLENEBIS RAT NOAEL: 0.004 MG/L DURING ORGANOGENESIS
(PHENYL ISOCYANATE)
4,4'-DIISOCYANATODI- RAT NOAEL: 0.004 MG/L DURING ORGANOGENESIS
PHENYLMETHANE POLYMER
3-(TRIMETHOXYSILYL) RAT NOAEL: 1 GENERATION
PROPYL GLYCIDYL ETHER 1,000 MG/KG/DAY
3-(TRIMETHOXYSILYL) RAT NOAEL: 1 GENERATION
PROPYL GLYCIDYL ETHER 1,000 MG/KG/DAY
3-(TRIMETHOXYSILYL) RAT NOAEL: DURING ORGANOGENESIS
PROPYL GLYCIDYL ETHER 3,000 MG/KG/DAY
TARGET ORGAN(S):
SPECIFIC TARGET ORGAN TOXICITY - SINGLE EXPOSURE:
NAME ROUTE TARGET ORGAN(S) VALUE
P,P'-METHYLENEBIS INHALATION RESPIRATORY MAY CAUSE RESPIRATORY
(PHENYL ISOCYANATE) IRRITATION IRRITATION
4,4'-DIISOCYA- INHALATION RESPIRATORY MAY CAUSE RESPIRATORY
NATODIPHENYL- IRRITATION IRRITATION
METHANE POLYMER
NAME SPECIES TEST RESULT EXPOSURE
DURATION
P,P'-METHYLENEBIS(PHENYL OFFICIAL NOAEL:
ISOCYANATE) CLASSIFICATION NOT AVAILABLE
4,4'-DIISOCYANATODIPHENYL- OFFICIAL NOAEL:
METHANE POLYMER CLASSIFICATION NOT AVAILABLE
SPECIFIC TARGET ORGAN TOXICITY - REPEATED EXPOSURE:
NAME ROUTE TARGET ORGAN(S) VALUE
P,P'-METHYLENEBIS INHALATION RESPIRATORY SYSTEM CAUSES DAMAGE TO
(PHENYL ISOCYANATE) ORGANS THROUGH
PROLONGED OR
REPEATED EXPOSURE
4,4'-DIISOCYANATODI- INHALATION RESPIRATORY SYSTEM CAUSES DAMAGE TO
PHENYLMETHANE POLYMER ORGANS THROUGH
PROLONGED OR
REPEATED EXPOSURE
3-(TRIMETHOXYSILYL) INGESTION HEART ALL DATA ARE
PROPYL GLYCIDYL ETHER ENDOCRINE SYSTEM NEGATIVE
BONE, TEETH, NAILS,
AND/OR HAIR
HEMATOPOIETIC
SYSTEM
LIVER
IMMUNE SYSTEM
NERVOUS SYSTEM
KIDNEY AND/OR
BLADDER
RESPIRATORY
SYSTEM
NAME SPECIES TEST RESULT EXPOSURE DURATION
P,P'-METHYLENEBIS(PHENYL RAT LOAEL: 0.004 MG/L 13 WEEKS
ISOCYANATE)
4,4'-DIISOCYANATODI- RAT LOAEL: 0.004 MG/L 13 WEEKS
PHENYLMETHANE POLYMER
3-(TRIMETHOXYSILYL) RAT NOAEL: 28 DAYS
PROPYL GLYCIDYL ETHER 1,000 MG/KG/DAY
ASPIRATION HAZARD:
FOR THE COMPONENT/COMPONENTS, EITHER NO DATA ARE CURRENTLY AVAILABLE OR THE
DATA ARE NOT SUFFICIENT FOR CLASSIFICATION.
PLEASE CONTACT THE ADDRESS OR PHONE NUMBER LISTED IN SECTION 1 OF THIS
SDS FOR ADDITIONAL TOXICOLOGICAL INFORMATION ON THIS MATERIAL AND/OR
ITS COMPONENTS.
| SECTION 12: ECOLOGICAL INFORMATION | |
ECOTOXICOLOGICAL INFORMATION:
PLEASE CONTACT THE ADDRESS OR PHONE NUMBER LISTED IN SECTION 1 OF THIS
SDS FOR ADDITIONAL ECOTOXICOLOGICAL INFORMATION ON THIS MATERIAL AND/OR
ITS COMPONENTS.
CHEMICAL FATE INFORMATION:
PLEASE CONTACT THE ADDRESS OR PHONE NUMBER LISTED IN SECTION 1 OF THIS
SDS FOR ADDITIONAL CHEMICAL FATE INFORMATION ON THIS MATERIAL AND/OR
ITS COMPONENTS.
| SECTION 13: DISPOSAL CONSIDERATIONS | |
13.1. DISPOSAL METHODS:
DISPOSE OF CONTENTS/CONTAINER IN ACCORDANCE WITH THE
LOCAL/REGIONAL/NATIONAL/INTERNATIONAL REGULATIONS.
DISPOSE OF COMPLETELY CURED (OR POLYMERIZED) MATERIAL IN A PERMITTED
INDUSTRIAL WASTE FACILITY. AS A DISPOSAL ALTERNATIVE, INCINERATE UNCURED
PRODUCT IN A PERMITTED WASTE INCINERATION FACILITY. PROPER DESTRUCTION MAY
REQUIRE THE USE OF ADDITIONAL FUEL DURING INCINERATION PROCESSES. IF NO
OTHER DISPOSAL OPTIONS ARE AVAILABLE, WASTE PRODUCT THAT HAS BEEN
COMPLETELY CURED OR POLYMERIZED MAY BE PLACED IN A LANDFILL PROPERLY
DESIGNED FOR INDUSTRIAL WASTE. EMPTY DRUMS/BARRELS/CONTAINERS USED FOR
TRANSPORTING AND HANDLING HAZARDOUS CHEMICALS (CHEMICAL
SUBSTANCES/MIXTURES/PREPARATIONS CLASSIFIED AS HAZARDOUS AS PER APPLICABLE
REGULATIONS) SHALL BE CONSIDERED, STORED, TREATED & DISPOSED OF AS
HAZARDOUS WASTES UNLESS OTHERWISE DEFINED BY APPLICABLE WASTE REGULATIONS.
CONSULT WITH THE RESPECTIVE REGULATING AUTHORITIES TO DETERMINE THE
AVAILABLE TREATMENT AND DISPOSAL FACILITIES.
| SECTION 14: TRANSPORT INFORMATION | |
NOT REGULATED PER U.S. DOT, IATA OR IMO.
THESE TRANSPORTATION CLASSIFICATIONS ARE PROVIDED AS A CUSTOMER SERVICE. AS
THE SHIPPER YOU REMAIN RESPONSIBLE FOR COMPLYING WITH ALL APPLICABLE LAWS
AND REGULATIONS, INCLUDING PROPER TRANSPORTATION CLASSIFICATION AND
PACKAGING. 3M TRANSPORTATION CLASSIFICATIONS ARE BASED ON PRODUCT
FORMULATION, PACKAGING, 3M POLICIES AND 3M UNDERSTANDING OF APPLICABLE
CURRENT REGULATIONS. 3M DOES NOT GUARANTEE THE ACCURACY OF THIS
CLASSIFICATION INFORMATION. THIS INFORMATION APPLIES ONLY TO TRANSPORTATION
CLASSIFICATION AND NOT THE PACKAGING, LABELING, OR MARKING REQUIREMENTS.
THE ORIGINAL 3M PACKAGE IS CERTIFIED FOR U.S. GROUND SHIPMENT ONLY. IF YOU
ARE SHIPPING BY AIR OR OCEAN, THE PACKAGE MAY NOT MEET APPLICABLE
REGULATORY REQUIREMENTS.
| SECTION 15: REGULATORY INFORMATION | |
15.1. US FEDERAL REGULATIONS: CONTACT 3M FOR MORE INFORMATION.
311/312 HAZARD CATEGORIES:
FIRE HAZARD: NO
PRESSURE HAZARD: NO
REACTIVITY HAZARD: NO
IMMEDIATE HAZARD: YES
DELAYED HAZARD: YES
SECTION 313 TOXIC CHEMICALS SUBJECT TO THE REPORTING REQUIREMENTS OF THAT
SECTION AND 40 CFR PART 372 (EPCRA):
INGREDIENT C.A.S. NO % BY WT
P,P'-METHYLENEBIS(PHENYL ISOCYANATE) 101-68-8 TRADE SECRET 30 - 60
P,P'-METHYLENEBIS(PHENYL ISOCYANATE) 101-68-8 30 - 60
(BENZENE,1,1'-METHYLENEBIS[4-
ISOCYANATO-)
P,P'-METHYLENEBIS(PHENYL ISOCYANATE) 101-68-8 30 - 60
(DIISOCYANATES (CERTAIN CHEMICALS
ONLY))
15.2. STATE REGULATIONS: CONTACT 3M FOR MORE INFORMATION.
15.3. CHEMICAL INVENTORIES:
THE COMPONENTS OF THIS PRODUCT ARE IN COMPLIANCE WITH THE CHEMICAL
NOTIFICATION REQUIREMENTS OF TSCA.
CONTACT 3M FOR MORE INFORMATION.
15.4. INTERNATIONAL REGULATIONS: CONTACT 3M FOR MORE INFORMATION.
THIS SDS HAS BEEN PREPARED TO MEET THE U.S. OSHA HAZARD COMMUNICATION
STANDARD, 29 CFR 1910.1200.
| SECTION 16: OTHER INFORMATION | |
NFPA HAZARD CLASSIFICATION:
HEALTH 3
FLAMMABILITY 1
INSTABILITY 1
SPECIAL HAZARDS NONE
NATIONAL FIRE PROTECTION ASSOCIATION (NFPA) HAZARD RATINGS ARE DESIGNED FOR
USE BY EMERGENCY RESPONSE PERSONNEL TO ADDRESS THE HAZARDS THAT ARE
PRESENTED BY SHORT-TERM, ACUTE EXPOSURE TO A MATERIAL UNDER CONDITIONS OF
FIRE, SPILL, OR SIMILAR EMERGENCIES. HAZARD RATINGS ARE PRIMARILY BASED ON
THE INHERENT PHYSICAL AND TOXIC PROPERTIES OF THE MATERIAL BUT ALSO INCLUDE
THE TOXIC PROPERTIES OF COMBUSTION OR DECOMPOSITION PRODUCTS THAT ARE KNOWN
TO BE GENERATED IN SIGNIFICANT QUANTITIES.
HMIS HAZARD CLASSIFICATION:
HEALTH 1*
FLAMMABILITY 1
PHYSICAL HAZARD 1
PERSONAL PROTECTION X - SEE PPE SECTION.
HAZARDOUS MATERIAL IDENTIFICATION SYSTEM (HMIS(R*) IV) HAZARD RATINGS ARE
DESIGNED TO INFORM EMPLOYEES OF CHEMICAL HAZARDS IN THE WORKPLACE. THESE
RATINGS ARE BASED ON THE INHERENT PROPERTIES OF THE MATERIAL UNDER EXPECTED
CONDITIONS OF NORMAL USE AND ARE NOT INTENDED FOR USE IN EMERGENCY
SITUATIONS. HMIS(R*) IV RATINGS ARE TO BE USED WITH A FULLY IMPLEMENTED
HMIS(R*) IV PROGRAM. HMIS(R*) IS A REGISTERED MARK OF THE AMERICAN COATINGS
ASSOCIATION (ACA).
DOCUMENT GROUP: 22-1807-1
ISSUE DATE: 12/01/15
VERSION NUMBER: 6.02
SUPERCEDES DATE: 11/24/15
DISCLAIMER:
THE INFORMATION IN THIS SAFETY DATA SHEET (SDS) IS BELIEVED TO BE CORRECT
AS OF THE DATE ISSUED. 3M MAKES NO WARRANTIES, EXPRESSED OR IMPLIED,
INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE OR COURSE OF PERFORMANCE OR USAGE OF
TRADE. USER IS RESPONSIBLE FOR DETERMINING WHETHER THE 3M PRODUCT IS FIT
FOR A PARTICULAR PURPOSE AND SUITABLE FOR USER'S METHOD OF USE OR
APPLICATION. GIVEN THE VARIETY OF FACTORS THAT CAN AFFECT THE USE AND
APPLICATION OF A 3M PRODUCT, SOME OF WHICH ARE UNIQUELY WITHIN THE USER'S
KNOWLEDGE AND CONTROL, IT IS ESSENTIAL THAT THE USER EVALUATE THE 3M
PRODUCT TO DETERMINE WHETHER IT IS FIT FOR A PARTICULAR PURPOSE AND
SUITABLE FOR USER'S METHOD OF USE OR APPLICATION.
3M PROVIDES INFORMATION IN ELECTRONIC FORM AS A SERVICE TO ITS CUSTOMERS.
DUE TO THE REMOTE POSSIBILITY THAT ELECTRONIC TRANSFER MAY HAVE RESULTED IN
ERRORS, OMISSIONS OR ALTERATIONS IN THIS INFORMATION, 3M MAKES NO
REPRESENTATIONS AS TO ITS COMPLETENESS OR ACCURACY. IN ADDITION,
INFORMATION OBTAINED FROM A DATABASE MAY NOT BE AS CURRENT AS THE
INFORMATION IN THE SDS AVAILABLE DIRECTLY FROM 3M
3M USA SDSS ARE AVAILABLE AT WWW.3M.COM
3M(TM) SUPER FAST ADHESIVE PN 04747 ACCELERATOR (PART B)
08/11/14
3M
SAFETY DATA SHEET
COPYRIGHT, 2014, 3M COMPANY.
ALL RIGHTS RESERVED. COPYING AND/OR DOWNLOADING OF THIS INFORMATION FOR
THE PURPOSE OF PROPERLY UTILIZING 3M PRODUCTS IS ALLOWED PROVIDED THAT:
(1) THE INFORMATION IS COPIED IN FULL WITH NO CHANGES UNLESS PRIOR WRITTEN
AGREEMENT IS OBTAINED FROM 3M, AND
(2) NEITHER THE COPY NOR THE ORIGINAL IS RESOLD OR OTHERWISE DISTRIBUTED
WITH THE INTENTION OF EARNING A PROFIT THEREON.
DOCUMENT GROUP: 22-1870-9
ISSUE DATE: 08/11/14
VERSION NUMBER: 4.01
SUPERCEDES DATE: 03/20/14
| SECTION 1: IDENTIFICATION | |
1.1. PRODUCT IDENTIFIER:
3M(TM) SUPER FAST ADHESIVE PN 04747 ACCELERATOR (PART B)
PRODUCT IDENTIFICATION NUMBERS: LB-K100-0780-6, LA-D100-0023-3
1.2. RECOMMENDED USE AND RESTRICTIONS ON USE:
RECOMMENDED USE: TWO-PART URETHANE SYSTEM., INDUSTRIAL USE
1.3. SUPPLIER'S DETAILS:
MANUFACTURER: 3M
DIVISION: AUTOMOTIVE AFTERMARKET
ADDRESS:
3M CENTER
ST. PAUL, MN 55144-1000
USA
TELEPHONE: 1-888-3M HELPS (1-888-364-3577)
1.4. EMERGENCY TELEPHONE NUMBER:
1-800-364-3577 OR (651) 737-6501 (24 HOURS)
| SECTION 2: HAZARD IDENTIFICATION | |
THE LABEL ELEMENTS BELOW WERE PREPARED IN ACCORDANCE WITH OSHA HAZARD
COMMUNICATION STANDARD, 29 CFR 1910.1200. THIS INFORMATION MAY BE
DIFFERENT FROM THE ACTUAL PRODUCT LABEL INFORMATION FOR LABELS REGULATED
BY OTHER AGENCIES.
2.1. HAZARD CLASSIFICATION:
SERIOUS EYE DAMAGE/IRRITATION: CATEGORY 2A.
SKIN CORROSION/IRRITATION: CATEGORY 2.
SKIN SENSITIZER: CATEGORY 1.
2.2. LABEL ELEMENTS:
SIGNAL WORD: WARNING
SYMBOLS: EXCLAMATION MARK
PICTOGRAMS: EXCLAMATION MARK
HAZARD STATEMENTS:
CAUSES SERIOUS EYE IRRITATION.
CAUSES SKIN IRRITATION.
MAY CAUSE AN ALLERGIC SKIN REACTION.
PRECAUTIONARY STATEMENTS:
GENERAL: KEEP OUT OF REACH OF CHILDREN.
PREVENTION:
AVOID BREATHING DUST/FUME/GAS/MIST/VAPORS/SPRAY.
WEAR PROTECTIVE GLOVES AND EYE/FACE PROTECTION.
WASH THOROUGHLY AFTER HANDLING.
CONTAMINATED WORK CLOTHING MUST NOT BE ALLOWED OUT OF THE WORKPLACE.
RESPONSE:
IF IN EYES:
RINSE CAUTIOUSLY WITH WATER FOR SEVERAL MINUTES. REMOVE CONTACT LENSES, IF
PRESENT AND EASY TO DO.
CONTINUE RINSING.
IF EYE IRRITATION PERSISTS: GET MEDICAL ADVICE/ATTENTION.
IF ON SKIN: WASH WITH PLENTY OF SOAP AND WATER.
IF SKIN IRRITATION OR RASH OCCURS: GET MEDICAL ADVICE/ATTENTION.
TAKE OFF CONTAMINATED CLOTHING AND WASH IT BEFORE REUSE.
WASH CONTAMINATED CLOTHING BEFORE REUSE.
DISPOSAL:
DISPOSE OF CONTENTS/CONTAINER IN ACCORDANCE WITH APPLICABLE
LOCAL/REGIONAL/NATIONAL/INTERNATIONAL REGULATIONS.
2.3. HAZARDS NOT OTHERWISE CLASSIFIED:
PERSONS PREVIOUSLY SENSITIZED TO AMINES MAY DEVELOP A CROSS-SENSITIZATION
REACTION TO CERTAIN OTHER AMINES.
18% OF THE MIXTURE CONSISTS OF INGREDIENTS OF UNKNOWN ACUTE INHALATION
TOXICITY.
| SECTION 3: COMPOSITION/INFORMATION ON INGREDIENTS | |
INGREDIENT C.A.S. NO. % BY WT
POLYETHER POLYOL 9082-00-2 40 - 70 TRADE SECRET *
PROPOXYLATED TRIMETHYLOLPROPANE 25723-16-4 10 - 30 TRADE SECRET *
TETRAKIS(2-HYDROXYPROPYL) 102-60-3 10 - 30 TRADE SECRET *
ETHYLENEDIAMINE
M-XYLENE-ALPHA,ALPHA'-DIAMINE 1477-55-0 1 - 5 TRADE SECRET *
*THE SPECIFIC CHEMICAL IDENTITY AND/OR EXACT PERCENTAGE (CONCENTRATION) OF
THIS COMPOSITION HAS BEEN WITHHELD AS A TRADE SECRET.
| SECTION 4: FIRST AID MEASURES | |
4.1. DESCRIPTION OF FIRST AID MEASURES:
INHALATION:
REMOVE PERSON TO FRESH AIR. IF YOU FEEL UNWELL, GET MEDICAL ATTENTION.
SKIN CONTACT:
IMMEDIATELY WASH WITH SOAP AND WATER. REMOVE CONTAMINATED CLOTHING AND WASH
BEFORE REUSE. IF SIGNS/SYMPTOMS DEVELOP, GET MEDICAL ATTENTION.
EYE CONTACT:
IMMEDIATELY FLUSH WITH LARGE AMOUNTS OF WATER. REMOVE CONTACT LENSES IF
EASY TO DO. CONTINUE RINSING. GET MEDICAL ATTENTION.
IF SWALLOWED: RINSE MOUTH. IF YOU FEEL UNWELL, GET MEDICAL ATTENTION.
4.2. MOST IMPORTANT SYMPTOMS AND EFFECTS, BOTH ACUTE AND DELAYED:
SEE SECTION 11.1. INFORMATION ON TOXICOLOGICAL EFFECTS.
4.3. INDICATION OF ANY IMMEDIATE MEDICAL ATTENTION AND SPECIAL TREATMENT
REQUIRED: NOT APPLICABLE
| SECTION 5: FIRE-FIGHTING MEASURES | |
5.1. SUITABLE EXTINGUISHING MEDIA:
IN CASE OF FIRE: USE A DRY CHEMICAL EXTINGUISHER TO EXTINGUISH.
5.2. SPECIAL HAZARDS ARISING FROM THE SUBSTANCE OR MIXTURE:
NONE INHERENT IN THIS PRODUCT.
HAZARDOUS DECOMPOSITION OR BY-PRODUCTS:
SUBSTANCE CONDITION
CARBON MONOXIDE DURING COMBUSTION
CARBON DIOXIDE DURING COMBUSTION
OXIDES OF NITROGEN DURING COMBUSTION
5.3. SPECIAL PROTECTIVE ACTIONS FOR FIRE-FIGHTERS:
NO SPECIAL PROTECTIVE ACTIONS FOR FIRE-FIGHTERS ARE ANTICIPATED.
| SECTION 6: ACCIDENTAL RELEASE MEASURES | |
6.1. PERSONAL PRECAUTIONS, PROTECTIVE EQUIPMENT AND EMERGENCY PROCEDURES:
EVACUATE AREA. VENTILATE THE AREA WITH FRESH AIR. FOR LARGE SPILL, OR
SPILLS IN CONFINED SPACES, PROVIDE MECHANICAL VENTILATION TO DISPERSE OR
EXHAUST VAPORS, IN ACCORDANCE WITH GOOD INDUSTRIAL HYGIENE PRACTICE.
WARNING!
A MOTOR COULD BE AN IGNITION SOURCE AND COULD CAUSE FLAMMABLE GASES OR
VAPORS IN THE SPILL AREA TO BURN OR EXPLODE. REFER TO OTHER SECTIONS OF
THIS SDS FOR INFORMATION REGARDING PHYSICAL AND HEALTH HAZARDS, RESPIRATORY
PROTECTION, VENTILATION, AND PERSONAL PROTECTIVE EQUIPMENT.
6.2. ENVIRONMENTAL PRECAUTIONS: AVOID RELEASE TO THE ENVIRONMENT.
6.3. METHODS AND MATERIAL FOR CONTAINMENT AND CLEANING UP:
CONTAIN SPILL. WORKING FROM AROUND THE EDGES OF THE SPILL INWARD, COVER
WITH BENTONITE, VERMICULITE, OR COMMERCIALLY AVAILABLE INORGANIC ABSORBENT
MATERIAL. MIX IN SUFFICIENT ABSORBENT UNTIL IT APPEARS DRY. REMEMBER,
ADDING AN ABSORBENT MATERIAL DOES NOT REMOVE A PHYSICAL, HEALTH, OR
ENVIRONMENTAL HAZARD. COLLECT AS MUCH OF THE SPILLED MATERIAL AS POSSIBLE.
PLACE IN A CLOSED CONTAINER APPROVED FOR TRANSPORTATION BY APPROPRIATE
AUTHORITIES. CLEAN UP RESIDUE WITH AN APPROPRIATE SOLVENT SELECTED BY A
QUALIFIED AND AUTHORIZED PERSON. VENTILATE THE AREA WITH FRESH AIR. READ
AND FOLLOW SAFETY PRECAUTIONS ON THE SOLVENT LABEL AND SDS. SEAL THE
CONTAINER. DISPOSE OF COLLECTED MATERIAL AS SOON AS POSSIBLE.
| SECTION 7: HANDLING AND STORAGE | |
7.1. PRECAUTIONS FOR SAFE HANDLING:
AVOID BREATHING OF DUST CREATED BY CUTTING, SANDING, GRINDING OR MACHINING.
KEEP OUT OF REACH OF CHILDREN. AVOID BREATHING
DUST/FUME/GAS/MIST/VAPORS/SPRAY. DO NOT GET IN EYES, ON SKIN, OR ON
CLOTHING. DO NOT EAT, DRINK OR SMOKE WHEN USING THIS PRODUCT. WASH
THOROUGHLY AFTER HANDLING. CONTAMINATED WORK CLOTHING SHOULD NOT BE ALLOWED
OUT OF THE WORKPLACE. WASH CONTAMINATED CLOTHING BEFORE REUSE. AVOID
CONTACT WITH OXIDIZING AGENTS (EG. CHLORINE, CHROMIC ACID ETC.)
7.2. CONDITIONS FOR SAFE STORAGE INCLUDING ANY INCOMPATIBILITIES:
STORE AWAY FROM ACIDS. STORE AWAY FROM OXIDIZING AGENTS.
| SECTION 8: EXPOSURE CONTROLS/PERSONAL PROTECTION | |
8.1. CONTROL PARAMETERS:
OCCUPATIONAL EXPOSURE LIMITS:
INGREDIENT C.A.S. NO. AGENCY LIMIT TYPE ADDITIONAL COMMENTS
M-XYLENE-ALPHA, 1477-55-0 ACGIH CEIL: 0.1 MG/M3 SKIN NOTATION
ALPHA'-DIAMINE
ACGIH: AMERICAN CONFERENCE OF GOVERNMENTAL INDUSTRIAL HYGIENISTS
AIHA: AMERICAN INDUSTRIAL HYGIENE ASSOCIATION
CMRG: CHEMICAL MANUFACTURER'S RECOMMENDED GUIDELINES
OSHA:
UNITED STATES DEPARTMENT OF LABOR - OCCUPATIONAL SAFETY AND HEALTH
ADMINISTRATION
TWA: TIME-WEIGHTED-AVERAGE
STEL: SHORT TERM EXPOSURE LIMIT
CEIL: CEILING
8.2. EXPOSURE CONTROLS:
8.2.1. ENGINEERING CONTROLS:
PROVIDE APPROPRIATE LOCAL EXHAUST VENTILATION FOR CUTTING, GRINDING,
SANDING OR MACHINING. USE GENERAL DILUTION VENTILATION AND/OR LOCAL EXHAUST
VENTILATION TO CONTROL AIRBORNE EXPOSURES TO BELOW RELEVANT EXPOSURE LIMITS
AND/OR CONTROL DUST/FUME/GAS/MIST/VAPORS/SPRAY. IF VENTILATION IS NOT
ADEQUATE, USE RESPIRATORY PROTECTION EQUIPMENT.
8.2.2. PERSONAL PROTECTIVE EQUIPMENT (PPE):
EYE/FACE PROTECTION:
WEAR EYE/FACE PROTECTION. SELECT AND USE EYE/FACE PROTECTION TO PREVENT
CONTACT BASED ON THE RESULTS OF AN EXPOSURE ASSESSMENT.
THE FOLLOWING EYE/FACE PROTECTION(S) ARE RECOMMENDED:
INDIRECT VENTED GOGGLES
SKIN/HAND PROTECTION:
SELECT AND USE GLOVES AND/OR PROTECTIVE CLOTHING APPROVED TO RELEVANT LOCAL
STANDARDS TO PREVENT SKIN CONTACT BASED ON THE RESULTS OF AN EXPOSURE
ASSESSMENT. SELECTION SHOULD BE BASED ON USE FACTORS SUCH AS EXPOSURE
LEVELS, CONCENTRATION OF THE SUBSTANCE OR MIXTURE, FREQUENCY AND DURATION,
PHYSICAL CHALLENGES SUCH AS TEMPERATURE EXTREMES, AND OTHER USE CONDITIONS.
CONSULT WITH YOUR GLOVE AND/OR PROTECTIVE CLOTHING MANUFACTURER FOR
SELECTION OF APPROPRIATE COMPATIBLE GLOVES/PROTECTIVE CLOTHING.
GLOVES MADE FROM THE FOLLOWING MATERIAL(S) ARE RECOMMENDED:
BUTYL RUBBER
FLUOROELASTOMER
APRON - BUTYL RUBBER
RESPIRATORY PROTECTION:
IN CASE OF INADEQUATE VENTILATION WEAR RESPIRATORY PROTECTION. AN EXPOSURE
ASSESSMENT MAY BE NEEDED TO DECIDE IF A RESPIRATOR IS REQUIRED. IF A
RESPIRATOR IS NEEDED, USE RESPIRATORS AS PART OF A FULL RESPIRATORY
PROTECTION PROGRAM. BASED ON THE RESULTS OF THE EXPOSURE ASSESSMENT, SELECT
FROM THE FOLLOWING RESPIRATOR TYPE(S) TO REDUCE INHALATION EXPOSURE:
HALF FACEPIECE OR FULL FACEPIECE AIR-PURIFYING RESPIRATOR SUITABLE FOR
ORGANIC VAPORS
FOR QUESTIONS ABOUT SUITABILITY FOR A SPECIFIC APPLICATION, CONSULT WITH
YOUR RESPIRATOR MANUFACTURER.
| SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES | |
9.1. INFORMATION ON BASIC PHYSICAL AND CHEMICAL PROPERTIES:
GENERAL PHYSICAL FORM: LIQUID
SPECIFIC PHYSICAL FORM: GEL
ODOR, COLOR, GRADE: SLIGHT AMMONIA LIKE ODOR, CLEAR.
ODOR THRESHOLD: NO DATA AVAILABLE
PH: NOT APPLICABLE
MELTING POINT: NO DATA AVAILABLE
BOILING POINT: >=400 DEG. F
FLASH POINT: >=290 DEG. F [TEST METHOD: TAGLIABUE CLOSED CUP]
EVAPORATION RATE: <=1 [REF STD: WATER=1]
FLAMMABILITY (SOLID, GAS): NOT APPLICABLE
FLAMMABLE LIMITS(LEL): NOT APPLICABLE
FLAMMABLE LIMITS(UEL): NOT APPLICABLE
VAPOR PRESSURE: NOT APPLICABLE
VAPOR DENSITY: >=1 [REF STD: AIR=1]
DENSITY: 1.02 G/ML
SPECIFIC GRAVITY: 1.02 [REF STD: WATER=1]
SOLUBILITY IN WATER: NEGLIGIBLE
SOLUBILITY- NON-WATER: NO DATA AVAILABLE
PARTITION COEFFICIENT N-OCTANOL/WATER: NO DATA AVAILABLE
AUTOIGNITION TEMPERATURE: NOT APPLICABLE
DECOMPOSITION TEMPERATURE: NO DATA AVAILABLE
VISCOSITY: 1,300 - 2,000 CENTIPOISE
HAZARDOUS AIR POLLUTANTS: 0 LB HAPS/GAL [TEST METHOD: CALCULATED]
VOLATILE ORGANIC COMPOUNDS:
0% WEIGHT [TEST METHOD: CALCULATED PER CARB TITLE 2]
VOLATILE ORGANIC COMPOUNDS:
0 G/L [TEST METHOD: CALCULATED SCAQMD RULE 443.1]
PERCENT VOLATILE: <=1% WEIGHT [TEST METHOD: ESTIMATED]
VOC LESS H2O & EXEMPT SOLVENTS:
0 G/L [TEST METHOD: CALCULATED SCAQMD RULE 443.1]
| SECTION 10: STABILITY AND REACTIVITY | |
10.1. REACTIVITY:
THIS MATERIAL MAY BE REACTIVE WITH CERTAIN AGENTS UNDER CERTAIN CONDITIONS
- SEE THE REMAINING HEADINGS IN THIS SECTION.
10.2. CHEMICAL STABILITY: STABLE.
10.3. POSSIBILITY OF HAZARDOUS REACTIONS:
HAZARDOUS POLYMERIZATION WILL NOT OCCUR.
10.4. CONDITIONS TO AVOID: NONE KNOWN.
10.5. INCOMPATIBLE MATERIALS:
STRONG ACIDS
STRONG OXIDIZING AGENTS
10.6. HAZARDOUS DECOMPOSITION PRODUCTS:
SUBSTANCE CONDITION
NONE KNOWN.
REFER TO SECTION 5.2 FOR HAZARDOUS DECOMPOSITION PRODUCTS DURING
COMBUSTION.
| SECTION 11: TOXICOLOGICAL INFORMATION | |
THE INFORMATION BELOW MAY NOT BE CONSISTENT WITH THE MATERIAL
CLASSIFICATION IN SECTION 2 IF SPECIFIC INGREDIENT CLASSIFICATIONS ARE
MANDATED BY A COMPETENT AUTHORITY. IN ADDITION, TOXICOLOGICAL DATA ON
INGREDIENTS MAY NOT BE REFLECTED IN THE MATERIAL CLASSIFICATION AND/OR THE
SIGNS AND SYMPTOMS OF EXPOSURE, BECAUSE AN INGREDIENT MAY BE PRESENT BELOW
THE THRESHOLD FOR LABELING, AN INGREDIENT MAY NOT BE AVAILABLE FOR
EXPOSURE, OR THE DATA MAY NOT BE RELEVANT TO THE MATERIAL AS A WHOLE.
11.1. INFORMATION ON TOXICOLOGICAL EFFECTS:
SIGNS AND SYMPTOMS OF EXPOSURE:
BASED ON TEST DATA AND/OR INFORMATION ON THE COMPONENTS, THIS MATERIAL MAY
PRODUCE THE FOLLOWING HEALTH EFFECTS:
INHALATION:
RESPIRATORY TRACT IRRITATION:
SIGNS/SYMPTOMS MAY INCLUDE COUGH, SNEEZING, NASAL DISCHARGE, HEADACHE,
HOARSENESS, AND NOSE AND THROAT PAIN.
SKIN CONTACT:
SKIN IRRITATION:
SIGNS/SYMPTOMS MAY INCLUDE LOCALIZED REDNESS, SWELLING, ITCHING, DRYNESS,
CRACKING, BLISTERING, AND PAIN.
ALLERGIC SKIN REACTION (NON-PHOTO INDUCED):
SIGNS/SYMPTOMS MAY INCLUDE REDNESS, SWELLING, BLISTERING, AND ITCHING.
EYE CONTACT:
SEVERE EYE IRRITATION:
SIGNS/SYMPTOMS MAY INCLUDE SIGNIFICANT REDNESS, SWELLING, PAIN, TEARING,
CLOUDY APPEARANCE OF THE CORNEA, AND IMPAIRED VISION.
INGESTION: NO HEALTH EFFECTS ARE EXPECTED.
ADDITIONAL INFORMATION:
PERSONS PREVIOUSLY SENSITIZED TO AMINES MAY DEVELOP A CROSS-SENSITIZATION
REACTION TO CERTAIN OTHER AMINES.
TOXICOLOGICAL DATA:
IF A COMPONENT IS DISCLOSED IN SECTION 3 BUT DOES NOT APPEAR IN A TABLE
BELOW, EITHER NO DATA ARE AVAILABLE FOR THAT ENDPOINT OR THE DATA ARE NOT
SUFFICIENT FOR CLASSIFICATION.
ACUTE TOXICITY:
NAME ROUTE SPECIES VALUE
OVERALL PRODUCT DERMAL NO DATA AVAILABLE;
CALCULATED ATE: >5,000 MG/KG
OVERALL PRODUCT INHALATION- NO DATA AVAILABLE;
DUST/MIST CALCULATED ATE: >12.5 MG/L
(4 HR)
OVERALL PRODUCT INGESTION NO DATA AVAILABLE;
CALCULATED ATE: >5,000 MG/KG
POLYETHER POLYOL DERMAL RABBIT LD50: >5,000 MG/KG
POLYETHER POLYOL INGESTION RAT LD50: >10,000 MG/KG
PROPOXYLATED DERMAL RAT LD50: >2,000 MG/KG
TRIMETHYLOLPROPANE
PROPOXYLATED INGESTION RAT LD50: >2,500 MG/KG
TRIMETHYLOLPROPANE
TETRAKIS(2- DERMAL RABBIT LD50: >2,000 MG/KG
HYDROXYPROPYL)
ETHYLENEDIAMINE
TETRAKIS(2- INGESTION RAT LD50: 3,280 MG/KG
HYDROXYPROPYL)
ETHYLENEDIAMINE
M-XYLENE-ALPHA, DERMAL RABBIT LD50: >2,000 MG/KG
ALPHA'-DIAMINE
M-XYLENE-ALPHA, INHALATION- RAT LC50: 0.8 MG/L
ALPHA'-DIAMINE DUST/MIST
(4 HOURS)
M-XYLENE-ALPHA, INGESTION RAT LD50: 980 MG/KG
ALPHA'-DIAMINE
ATE = ACUTE TOXICITY ESTIMATE
SKIN CORROSION/IRRITATION:
NAME SPECIES VALUE
M-XYLENE-ALPHA,ALPHA'-DIAMINE RAT CORROSIVE
SERIOUS EYE DAMAGE/IRRITATION:
NAME SPECIES VALUE
M-XYLENE-ALPHA,ALPHA'-DIAMINE RABBIT CORROSIVE
SKIN SENSITIZATION:
NAME SPECIES VALUE
M-XYLENE-ALPHA,ALPHA'-DIAMINE GUINEA SENSITIZING
PIG
RESPIRATORY SENSITIZATION:
NAME SPECIES VALUE
GERM CELL MUTAGENICITY:
NAME ROUTE VALUE
M-XYLENE-ALPHA,ALPHA'-DIAMINE IN VITRO NOT MUTAGENIC
M-XYLENE-ALPHA,ALPHA'-DIAMINE IN VIVO NOT MUTAGENIC
CARCINOGENICITY:
NAME ROUTE SPECIES VALUE
REPRODUCTIVE TOXICITY:
REPRODUCTIVE AND/OR DEVELOPMENTAL EFFECTS:
NAME ROUTE VALUE
M-XYLENE-ALPHA,ALPHA'-DIAMINE INGESTION NOT TOXIC TO FEMALE REPRODUCTION
M-XYLENE-ALPHA,ALPHA'-DIAMINE INGESTION NOT TOXIC TO MALE REPRODUCTION
M-XYLENE-ALPHA,ALPHA'-DIAMINE INGESTION NOT TOXIC TO DEVELOPMENT
NAME SPECIES TEST RESULT EXPOSURE DURATION
M-XYLENE-ALPHA,ALPHA'-DIAMINE RAT NOAEL: 1 GENERATION
450 MG/KG/DAY
M-XYLENE-ALPHA,ALPHA'-DIAMINE RAT NOAEL: 1 GENERATION
450 MG/KG
M-XYLENE-ALPHA,ALPHA'-DIAMINE RAT NOAEL: 1 GENERATION
450 MG/KG/DAY
TARGET ORGAN(S):
SPECIFIC TARGET ORGAN TOXICITY - SINGLE EXPOSURE:
NAME ROUTE TARGET ORGAN(S) VALUE
M-XYLENE-ALPHA,ALPHA'- INHALATION RESPIRATORY SOME POSITIVE DATA
DIAMINE IRRITATION EXIST, BUT THE
DATA ARE NOT
SUFFICIENT FOR
CLASSIFICATION
NAME SPECIES TEST RESULT EXPOSURE DURATION
M-XYLENE-ALPHA,ALPHA'- NOT NOAEL:
DIAMINE AVAILABLE NOT AVAILABLE
SPECIFIC TARGET ORGAN TOXICITY - REPEATED EXPOSURE:
NAME ROUTE TARGET ORGAN(S) VALUE
M-XYLENE-ALPHA,ALPHA'- INGESTION ENDOCRINE SYSTEM SOME POSITIVE DATA
DIAMINE BLOOD EXIST, BUT THE
BONE MARROW DATA ARE NOT
SUFFICIENT FOR
CLASSIFICATION
NAME SPECIES TEST RESULT EXPOSURE DURATION
M-XYLENE-ALPHA,ALPHA'- RAT NOAEL: 600 MG/KG/DAY 28 DAYS
DIAMINE
ASPIRATION HAZARD:
NAME VALUE
PLEASE CONTACT THE ADDRESS OR PHONE NUMBER LISTED IN SECTION 1 OF THIS
SDS FOR ADDITIONAL TOXICOLOGICAL INFORMATION ON THIS MATERIAL AND/OR
ITS COMPONENTS.
| SECTION 12: ECOLOGICAL INFORMATION | |
ECOTOXICOLOGICAL INFORMATION:
PLEASE CONTACT THE ADDRESS OR PHONE NUMBER LISTED IN SECTION 1 OF THIS
SDS FOR ADDITIONAL ECOTOXICOLOGICAL INFORMATION ON THIS MATERIAL AND/OR
ITS COMPONENTS.
CHEMICAL FATE INFORMATION:
PLEASE CONTACT THE ADDRESS OR PHONE NUMBER LISTED IN SECTION 1 OF THIS
SDS FOR ADDITIONAL CHEMICAL FATE INFORMATION ON THIS MATERIAL AND/OR
ITS COMPONENTS.
| SECTION 13: DISPOSAL CONSIDERATIONS | |
13.1. DISPOSAL METHODS:
DISPOSE OF CONTENTS/CONTAINER IN ACCORDANCE WITH THE
LOCAL/REGIONAL/NATIONAL/INTERNATIONAL REGULATIONS.
DISPOSE OF COMPLETELY CURED (OR POLYMERIZED) MATERIAL IN A PERMITTED
INDUSTRIAL WASTE FACILITY. AS A DISPOSAL ALTERNATIVE, INCINERATE UNCURED
PRODUCT IN A PERMITTED WASTE INCINERATION FACILITY. PROPER DESTRUCTION MAY
REQUIRE THE USE OF ADDITIONAL FUEL DURING INCINERATION PROCESSES. EMPTY
DRUMS/BARRELS/CONTAINERS USED FOR TRANSPORTING AND HANDLING HAZARDOUS
CHEMICALS (CHEMICAL SUBSTANCES/MIXTURES/PREPARATIONS CLASSIFIED AS
HAZARDOUS AS PER APPLICABLE REGULATIONS) SHALL BE CONSIDERED, STORED,
TREATED & DISPOSED OF AS HAZARDOUS WASTES UNLESS OTHERWISE DEFINED BY
APPLICABLE WASTE REGULATIONS. CONSULT WITH THE RESPECTIVE REGULATING
AUTHORITIES TO DETERMINE THE AVAILABLE TREATMENT AND DISPOSAL FACILITIES.
| SECTION 14: TRANSPORT INFORMATION | |
NOT REGULATED PER U.S. DOT, IATA OR IMO.
THESE TRANSPORTATION CLASSIFICATIONS ARE PROVIDED AS A CUSTOMER SERVICE.
AS THE SHIPPER YOU REMAIN RESPONSIBLE FOR COMPLYING WITH ALL APPLICABLE
LAWS AND REGULATIONS, INCLUDING PROPER TRANSPORTATION CLASSIFICATION AND
PACKAGING. 3M TRANSPORTATION CLASSIFICATIONS ARE BASED ON PRODUCT
FORMULATION, PACKAGING, 3M POLICIES AND 3M UNDERSTANDING OF APPLICABLE
CURRENT REGULATIONS. 3M DOES NOT GUARANTEE THE ACCURACY OF THIS
CLASSIFICATION INFORMATION. THIS INFORMATION APPLIES ONLY TO TRANSPORTATION
CLASSIFICATION AND NOT THE PACKAGING, LABELING, OR MARKING REQUIREMENTS.
THE ORIGINAL 3M PACKAGE IS CERTIFIED FOR U.S. GROUND SHIPMENT ONLY. IF YOU
ARE SHIPPING BY AIR OR OCEAN, THE PACKAGE MAY NOT MEET APPLICABLE
REGULATORY REQUIREMENTS.
| SECTION 15: REGULATORY INFORMATION | |
15.1. US FEDERAL REGULATIONS: CONTACT 3M FOR MORE INFORMATION.
311/312 HAZARD CATEGORIES:
FIRE HAZARD: NO
PRESSURE HAZARD: NO
REACTIVITY HAZARD: NO
IMMEDIATE HAZARD: YES
DELAYED HAZARD: NO
15.2. STATE REGULATIONS: CONTACT 3M FOR MORE INFORMATION.
15.3. CHEMICAL INVENTORIES:
THE COMPONENTS OF THIS PRODUCT ARE IN COMPLIANCE WITH THE CHEMICAL
NOTIFICATION REQUIREMENTS OF TSCA.
CONTACT 3M FOR MORE INFORMATION.
15.4. INTERNATIONAL REGULATIONS: CONTACT 3M FOR MORE INFORMATION.
THIS SDS HAS BEEN PREPARED TO MEET THE U.S. OSHA HAZARD COMMUNICATION
STANDARD, 29 CFR 1910.1200.
| SECTION 16: OTHER INFORMATION | |
NFPA HAZARD CLASSIFICATION:
HEALTH 2
FLAMMABILITY 1
INSTABILITY 1
SPECIAL HAZARDS NONE
NATIONAL FIRE PROTECTION ASSOCIATION (NFPA) HAZARD RATINGS ARE DESIGNED FOR
USE BY EMERGENCY RESPONSE PERSONNEL TO ADDRESS THE HAZARDS THAT ARE
PRESENTED BY SHORT-TERM, ACUTE EXPOSURE TO A MATERIAL UNDER CONDITIONS OF
FIRE, SPILL, OR SIMILAR EMERGENCIES. HAZARD RATINGS ARE PRIMARILY BASED ON
THE INHERENT PHYSICAL AND TOXIC PROPERTIES OF THE MATERIAL BUT ALSO INCLUDE
THE TOXIC PROPERTIES OF COMBUSTION OR DECOMPOSITION PRODUCTS THAT ARE KNOWN
TO BE GENERATED IN SIGNIFICANT QUANTITIES.
HMIS HAZARD CLASSIFICATION:
HEALTH 2
FLAMMABILITY 1
PHYSICAL HAZARD 1
PERSONAL PROTECTION X - SEE PPE SECTION.
HAZARDOUS MATERIAL IDENTIFICATION SYSTEM (HMIS(R*) III) HAZARD RATINGS ARE
DESIGNED TO INFORM EMPLOYEES OF CHEMICAL HAZARDS IN THE WORKPLACE. THESE
RATINGS ARE BASED ON THE INHERENT PROPERTIES OF THE MATERIAL UNDER EXPECTED
CONDITIONS OF NORMAL USE AND ARE NOT INTENDED FOR USE IN EMERGENCY
SITUATIONS. HMIS(R*) III RATINGS ARE TO BE USED WITH A FULLY IMPLEMENTED
HMIS(R*) III PROGRAM. HMIS(R*) IS A REGISTERED MARK OF THE AMERICAN
COATINGS ASSOCIATION (ACA).
DOCUMENT GROUP: 22-1870-9
ISSUE DATE: 08/11/14
VERSION NUMBER: 4.01
SUPERCEDES DATE: 03/20/14
DISCLAIMER:
THE INFORMATION IN THIS SAFETY DATA SHEET (SDS) IS BELIEVED TO BE CORRECT
AS OF THE DATE ISSUED. 3M MAKES NO WARRANTIES, EXPRESSED OR IMPLIED,
INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE OR COURSE OF PERFORMANCE OR USAGE OF
TRADE. USER IS RESPONSIBLE FOR DETERMINING WHETHER THE 3M PRODUCT IS FIT
FOR A PARTICULAR PURPOSE AND SUITABLE FOR USER'S METHOD OF USE OR
APPLICATION. GIVEN THE VARIETY OF FACTORS THAT CAN AFFECT THE USE AND
APPLICATION OF A 3M PRODUCT, SOME OF WHICH ARE UNIQUELY WITHIN THE USER'S
KNOWLEDGE AND CONTROL, IT IS ESSENTIAL THAT THE USER EVALUATE THE 3M
PRODUCT TO DETERMINE WHETHER IT IS FIT FOR A PARTICULAR PURPOSE AND
SUITABLE FOR USER'S METHOD OF USE OR APPLICATION.
3M PROVIDES INFORMATION IN ELECTRONIC FORM AS A SERVICE TO ITS CUSTOMERS.
DUE TO THE REMOTE POSSIBILITY THAT ELECTRONIC TRANSFER MAY HAVE RESULTED IN
ERRORS, OMISSIONS OR ALTERATIONS IN THIS INFORMATION, 3M MAKES NO
REPRESENTATIONS AS TO ITS COMPLETENESS OR ACCURACY. IN ADDITION,
INFORMATION OBTAINED FROM A DATABASE MAY NOT BE AS CURRENT AS THE
INFORMATION IN THE SDS AVAILABLE DIRECTLY FROM 3M
3M USA SDSS ARE AVAILABLE AT WWW.3M.COM