| Common Name: | PTG-4008 |
| Manufacturer: | PRAXAIR |
| SDS Revision Date: | 9/25/2019 |
| SDS Format: | GHS-US |
| Item Number(s): | 302K89, 30N875 |
| Manufacturer Model Number(s): |
SDS Table of Contents
Click the desired link below to jump directly to that section in the SDS.
PORTAGAS
BY PRAXAIR
PTG-4008
SAFETY DATA SHEET
PTG-4008
THIS SDS CONFORMS TO U.S. CODE OF FEDERAL REGULATIONS 29 CFR 1910.1200,
HAZARD COMMUNICATION.
PREPARED FOR CANADA ACCORDING TO THE HAZARDOUS PRODUCTS REGULATION
(FEBRUARY 11, 2015).
DATE OF ISSUE: 05/11/2015
REVISION DATE: 09/25/2019
VERSION: 1.2
| SECTION 1: IDENTIFICATION |  |
1.1. PRODUCT IDENTIFIER:
PRODUCT FORM: SUBSTANCE
SUBSTANCE NAME: PTG-4008
FORMULA: (19.5 - 23.5 %) OXYGEN IN NITROGEN
1.2. RELEVANT IDENTIFIED USES OF THE SUBSTANCE OR MIXTURE AND USES ADVISED
AGAINST:
USE OF THE SUBSTANCE/MIXTURE: INDUSTRIAL USE; USE AS DIRECTED.
RECOMMENDED USE AND RESTRICTIONS ON USE: CALIBRATION / REFERENCE
1.3. DETAILS OF THE SUPPLIER OF THE SAFETY DATA SHEET:
USA:
PRAXAIR DISTRIBUTION, INC. (PORTAGAS)
1202 E SAM HOUSTON PKWY S
PASADENA, TX 77503
T: +1 713-928-6477
F: +1 713-928-9961
PDIMSDS@PRAXAIR.COM
CANADA:
PRAXAIR CANADA INC.
1 CITY CENTRE DRIVE, SUITE 1200
MISSISSAUGA, ONTARIO, L5B 1M2
1-888-257-5149
1.4. EMERGENCY TELEPHONE NUMBER:
EMERGENCY NUMBER:
ONSITE EMERGENCY: 1-800-645-4633
CHEMTREC, 24HR/DAY 7DAYS/WEEK - WITHIN USA: 1-800-424-9300
OUTSIDE USA: 001-703-527-3887 (COLLECT CALLS ACCEPTED, CONTRACT 17729)
| SECTION 2: HAZARD IDENTIFICATION | |
2.1. CLASSIFICATION OF THE SUBSTANCE OR MIXTURE:
GHS US CLASSIFICATION:
PRESS. GAS (COMP.): H280
2.2. LABEL ELEMENTS:
GHS US LABELING:
HAZARD PICTOGRAMS (GHS US):
GHS04: GAS CYLINDER
SIGNAL WORD (GHS US): WARNING
HAZARD STATEMENTS (GHS US):
H280: CONTAINS GAS UNDER PRESSURE; MAY EXPLODE IF HEATED
CGA-HG24: SUPPORTS COMBUSTION.
PRECAUTIONARY STATEMENTS (GHS US):
P403: USE AND STORE ONLY OUTDOORS OR IN A WELL-VENTILATED PLACE.
CGA-PG27: READ AND FOLLOW THE SAFETY DATA SHEET (SDS) BEFORE USE.
CGA-PG21: OPEN VALVE SLOWLY.
CGA-PG12: DO NOT OPEN VALVE UNTIL CONNECTED TO EQUIPMENT PREPARED FOR USE.
CGA-PG11:
NEVER PUT CYLINDERS INTO UNVENTILATED AREAS OF PASSENGER VEHICLES.
CGA-PG10: USE ONLY WITH EQUIPMENT RATED FOR CYLINDER PRESSURE.
CGA-PG06: CLOSE VALVE AFTER EACH USE AND WHEN EMPTY.
CGA-PG05: USE A BACK FLOW PREVENTIVE DEVICE IN THE PIPING.
CGA-PG02:
PROTECT FROM SUNLIGHT WHEN AMBIENT TEMPERATURE EXCEEDS 52 DEG. C
(125 DEG. F).
CGA-MP01:
IF INHALED: REMOVE PERSON TO FRESH AIR AND KEEP COMFORTABLE FOR BREATHING.
GET MEDICAL ADVICE/ATTENTION.
P261: AVOID BREATHING GAS, VAPORS
2.3. OTHER HAZARDS: NO ADDITIONAL INFORMATION AVAILABLE
2.4. UNKNOWN ACUTE TOXICITY (GHS US): NOT APPLICABLE.
2.1. CLASSIFICATION OF THE SUBSTANCE OR MIXTURE:
GHS-CA CLASSIFICATION:
PRESS. GAS (COMP.): H280
2.2. GHS LABEL ELEMENTS, INCLUDING PRECAUTIONARY STATEMENTS:
GHS-CA LABELLING:
HAZARD PICTOGRAMS:
GHS04: GAS CYLINDER
SIGNAL WORD: WARNING
HAZARD STATEMENTS:
CONTAINS GAS UNDER PRESSURE; MAY EXPLODE IF HEATED SUPPORTS COMBUSTION.
PRECAUTIONARY STATEMENTS:
USE AND STORE ONLY OUTDOORS OR IN A WELL-VENTILATED PLACE.
READ AND FOLLOW THE SAFETY DATA SHEET (SDS) BEFORE USE.
OPEN VALVE SLOWLY.
DO NOT OPEN VALVE UNTIL CONNECTED TO EQUIPMENT PREPARED FOR USE.
NEVER PUT CYLINDERS INTO UNVENTILATED AREAS OF PASSENGER VEHICLES.
USE ONLY WITH EQUIPMENT RATED FOR CYLINDER PRESSURE.
CLOSE VALVE AFTER EACH USE AND WHEN EMPTY.
USE A BACK FLOW PREVENTIVE DEVICE IN THE PIPING.
PROTECT FROM SUNLIGHT WHEN AMBIENT TEMPERATURE EXCEEDS 52 DEG. C
(125 DEG. F).
IF INHALED:
REMOVE PERSON TO FRESH AIR AND KEEP COMFORTABLE FOR BREATHING. GET MEDICAL
ADVICE/ATTENTION.
AVOID BREATHING GAS, VAPORS
2.3. OTHER HAZARDS:
2.4. UNKNOWN ACUTE TOXICITY (GHS CA): NO DATA AVAILABLE
| SECTION 3: COMPOSITION/INFORMATION ON INGREDIENTS | |
3.1. SUBSTANCES:
NAME: PTG-4008
NAME PRODUCT IDENTIFIER % COMMON NAME (SYNONYMS)
AIR (CAS-NO.) 132259-10-0 AIR, COMPRESSED / AIR, REFRIGERATED
LIQUID / AMBIENT AIR
3.2. MIXTURES: NOT APPLICABLE
| SECTION 4: FIRST AID MEASURES | |
4.1. DESCRIPTION OF FIRST AID MEASURES:
FIRST-AID MEASURES AFTER INHALATION:
REMOVE TO FRESH AIR AND KEEP AT REST IN A POSITION COMFORTABLE FOR
BREATHING. IF NOT BREATHING, GIVE ARTIFICIAL RESPIRATION. IF BREATHING
IS DIFFICULT, TRAINED PERSONNEL SHOULD GIVE OXYGEN. CALL A PHYSICIAN.
FIRST-AID MEASURES AFTER SKIN CONTACT:
ADVERSE EFFECTS NOT EXPECTED FROM THIS PRODUCT.
FIRST-AID MEASURES AFTER EYE CONTACT:
IMMEDIATELY FLUSH EYES THOROUGHLY WITH WATER FOR AT LEAST 15 MINUTES.
HOLD THE EYELIDS OPEN AND AWAY FROM THE EYEBALLS TO ENSURE THAT ALL
SURFACES ARE FLUSHED THOROUGHLY. CONTACT AN OPHTHALMOLOGIST IMMEDIATELY.
FIRST-AID MEASURES AFTER INGESTION:
INGESTION IS NOT CONSIDERED A POTENTIAL ROUTE OF EXPOSURE.
4.2. MOST IMPORTANT SYMPTOMS AND EFFECTS, BOTH ACUTE AND DELAYED:
NO ADDITIONAL INFORMATION AVAILABLE
4.3. INDICATION OF ANY IMMEDIATE MEDICAL ATTENTION AND SPECIAL TREATMENT
NEEDED: NONE.
| SECTION 5: FIREFIGHTING MEASURES | |
5.1. EXTINGUISHING MEDIA:
SUITABLE EXTINGUISHING MEDIA:
USE EXTINGUISHING MEDIA APPROPRIATE FOR SURROUNDING FIRE.
5.2. SPECIAL HAZARDS ARISING FROM THE SUBSTANCE OR MIXTURE:
REACTIVITY:
NO REACTIVITY HAZARD OTHER THAN THE EFFECTS DESCRIBED IN SUB-SECTIONS
BELOW.
5.3. ADVICE FOR FIREFIGHTERS:
FIREFIGHTING INSTRUCTIONS:
EVACUATE ALL PERSONNEL FROM THE DANGER AREA. USE SELF-CONTAINED BREATHING
APPARATUS (SCBA) AND PROTECTIVE CLOTHING. IMMEDIATELY COOL CONTAINERS WITH
WATER FROM MAXIMUM DISTANCE. STOP FLOW OF GAS IF SAFE TO DO SO, WHILE
CONTINUING COOLING WATER SPRAY. REMOVE IGNITION SOURCES IF SAFE TO DO SO.
REMOVE CONTAINERS FROM AREA OF FIRE IF SAFE TO DO SO. ON-SITE FIRE
BRIGADES MUST COMPLY WITH OSHA 29 CFR 1910.156 AND APPLICABLE STANDARDS
UNDER 29 CFR 1910 SUBPART L-FIRE PROTECTION.
SPECIAL PROTECTIVE EQUIPMENT FOR FIRE FIGHTERS:
STANDARD PROTECTIVE CLOTHING AND EQUIPMENT (SELF CONTAINED BREATHING
APPARATUS) FOR FIRE FIGHTERS.
| SECTION 6: ACCIDENTAL RELEASE MEASURES | |
6.1. PERSONAL PRECAUTIONS, PROTECTIVE EQUIPMENT AND EMERGENCY PROCEDURES:
6.1.1. FOR NON-EMERGENCY PERSONNEL: NO ADDITIONAL INFORMATION AVAILABLE
6.1.2. FOR EMERGENCY RESPONDERS: NO ADDITIONAL INFORMATION AVAILABLE
6.2. ENVIRONMENTAL PRECAUTIONS:
PREVENT WASTE FROM CONTAMINATING THE SURROUNDING ENVIRONMENT. PREVENT SOIL
AND WATER POLLUTION. DISPOSE OF CONTENTS/CONTAINER IN ACCORDANCE WITH
LOCAL/REGIONAL/NATIONAL/INTERNATIONAL REGULATIONS. CONTACT SUPPLIER FOR
ANY SPECIAL REQUIREMENTS.
6.3. METHODS AND MATERIAL FOR CONTAINMENT AND CLEANING UP:
NO ADDITIONAL INFORMATION AVAILABLE
6.4. REFERENCE TO OTHER SECTIONS: SEE ALSO SECTIONS 8 AND 13.
| SECTION 7: HANDLING AND STORAGE | |
7.1. PRECAUTIONS FOR SAFE HANDLING:
PRECAUTIONS FOR SAFE HANDLING:
WEAR LEATHER SAFETY GLOVES AND SAFETY SHOES WHEN HANDLING CYLINDERS.
PROTECT CYLINDERS FROM PHYSICAL DAMAGE; DO NOT DRAG, ROLL, SLIDE OR
DROP. WHILE MOVING CYLINDER, ALWAYS KEEP IN PLACE REMOVABLE VALVE
COVER. NEVER ATTEMPT TO LIFT A CYLINDER BY ITS CAP; THE CAP IS
INTENDED SOLELY TO PROTECT THE VALVE. WHEN MOVING CYLINDERS, EVEN
FOR SHORT DISTANCES, USE A CART (TROLLEY, HAND TRUCK, ETC.) DESIGNED
TO TRANSPORT CYLINDERS. NEVER INSERT AN OBJECT (E.G, WRENCH, SCREWDRIVER,
PRY BAR) INTO CAP OPENINGS; DOING SO MAY DAMAGE THE VALVE AND CAUSE A
LEAK. USE AN ADJUSTABLE STRAP WRENCH TO REMOVE OVER-TIGHT OR RUSTED CAPS.
SLOWLY OPEN THE VALVE. IF THE VALVE IS HARD TO OPEN, DISCONTINUE USE AND
CONTACT YOUR SUPPLIER. CLOSE THE CONTAINER VALVE AFTER EACH USE; KEEP
CLOSED EVEN WHEN EMPTY. NEVER APPLY FLAME OR LOCALIZED HEAT DIRECTLY TO
ANY PART OF THE CONTAINER. HIGH TEMPERATURES MAY DAMAGE THE CONTAINER AND
COULD CAUSE THE PRESSURE RELIEF DEVICE TO FAIL PREMATURELY, VENTING THE
CONTAINER CONTENTS. FOR OTHER PRECAUTIONS IN USING THIS PRODUCT, SEE
SECTION 16.
7.2. CONDITIONS FOR SAFE STORAGE, INCLUDING ANY INCOMPATIBILITIES:
STORAGE CONDITIONS:
STORE IN A COOL, WELL-VENTILATED PLACE. STORE AND USE WITH ADEQUATE
VENTILATION. STORE ONLY WHERE TEMPERATURE WILL NOT EXCEED 125 DEG. F
(52 DEG. C). FIRMLY SECURE CONTAINERS UPRIGHT TO KEEP THEM FROM FALLING OR
BEING KNOCKED OVER. INSTALL VALVE PROTECTION CAP, IF PROVIDED, FIRMLY IN
PLACE BY HAND. STORE FULL AND EMPTY CONTAINERS SEPARATELY. USE A FIRST-IN,
FIRST-OUT INVENTORY SYSTEM TO PREVENT STORING FULL CONTAINERS FOR LONG
PERIODS.
OTHER PRECAUTIONS FOR HANDLING, STORAGE, AND USE:
WHEN HANDLING PRODUCT UNDER PRESSURE, USE PIPING AND EQUIPMENT ADEQUATELY
DESIGNED TO WITHSTAND THE PRESSURES TO BE ENCOUNTERED. NEVER WORK ON A
PRESSURIZED SYSTEM. USE A BACK FLOW PREVENTIVE DEVICE IN THE PIPING.
GASES CAN CAUSE RAPID SUFFOCATION BECAUSE OF OXYGEN DEFICIENCY; STORE AND
USE WITH ADEQUATE VENTILATION. IF A LEAK OCCURS, CLOSE THE CONTAINER VALVE
AND BLOW DOWN THE SYSTEM IN A SAFE AND ENVIRONMENTALLY CORRECT MANNER IN
COMPLIANCE WITH ALL INTERNATIONAL, FEDERAL/NATIONAL, STATE/PROVINCIAL,
AND LOCAL LAWS; THEN REPAIR THE LEAK. NEVER PLACE A CONTAINER WHERE IT MAY
BECOME PART OF AN ELECTRICAL CIRCUIT.
7.3. SPECIFIC END USE(S): NONE.
| SECTION 8: EXPOSURE CONTROLS/PERSONAL PROTECTION | |
8.1. CONTROL PARAMETERS:
PTG-4008:
ACGIH: NOT APPLICABLE
OSHA: NOT APPLICABLE
AIR (132259-10-0):
ACGIH: NOT APPLICABLE
OSHA: NOT APPLICABLE
8.2. EXPOSURE CONTROLS:
APPROPRIATE ENGINEERING CONTROLS:
PROVIDE ADEQUATE GENERAL AND LOCAL EXHAUST VENTILATION. ENSURE EXPOSURE IS
BELOW OCCUPATIONAL EXPOSURE LIMITS (WHERE AVAILABLE).
PERSONAL PROTECTIVE EQUIPMENT: GLOVES. SAFETY GLASSES.
EYE PROTECTION:
WEAR SAFETY GLASSES WHEN HANDLING CYLINDERS; VAPOR-PROOF GOGGLES AND A
FACE SHIELD DURING CYLINDER CHANGEOUT OR WHENEVER CONTACT WITH PRODUCT
IS POSSIBLE. SELECT EYE PROTECTION IN ACCORDANCE WITH OSHA 29 CFR
1910.133. SELECT IN ACCORDANCE WITH THE CURRENT CSA STANDARD Z94.3,
"INDUSTRIAL EYE AND FACE PROTECTION", AND ANY PROVINCIAL REGULATIONS,
LOCAL BYLAWS OR GUIDELINES.
SKIN AND BODY PROTECTION:
WEAR METATARSAL SHOES AND WORK GLOVES FOR CYLINDER HANDLING, AND
PROTECTIVE CLOTHING WHERE NEEDED. WEAR APPROPRIATE CHEMICAL GLOVES
DURING CYLINDER CHANGEOUT OR WHEREVER CONTACT WITH PRODUCT IS
POSSIBLE. SELECT PER OSHA 29 CFR 1910.132, 1910.136, AND 1910.138.
SAFETY SHOES:
SELECT IN ACCORDANCE WITH THE CURRENT CSA STANDARD Z195,
"PROTECTIVE FOOT WEAR", AND ANY PROVINCIAL REGULATIONS, LOCAL BYLAWS OR
GUIDELINES.
RESPIRATORY PROTECTION:
WHEN WORKPLACE CONDITIONS WARRANT RESPIRATOR USE, FOLLOW A RESPIRATORY
PROTECTION PROGRAM THAT MEETS OSHA 29 CFR 1910.134, ANSI Z88.2, OR MSHA
30 CFR 72.710 (WHERE APPLICABLE). USE AN AIR-SUPPLIED OR AIR-PURIFYING
CARTRIDGE IF THE ACTION LEVEL IS EXCEEDED. ENSURE THAT THE RESPIRATOR HAS
THE APPROPRIATE PROTECTION FACTOR FOR THE EXPOSURE LEVEL. IF CARTRIDGE
TYPE RESPIRATORS ARE USED, THE CARTRIDGE MUST BE APPROPRIATE FOR THE
CHEMICAL EXPOSURE. FOR EMERGENCIES OR INSTANCES WITH UNKNOWN EXPOSURE
LEVELS, USE A SELF-CONTAINED BREATHING APPARATUS (SCBA).
RESPIRATORY PROTECTION:
USE RESPIRABLE FUME RESPIRATOR OR AIR SUPPLIED RESPIRATOR WHEN WORKING IN
CONFINED SPACE OR WHERE LOCAL EXHAUST OR VENTILATION DOES NOT KEEP
EXPOSURE BELOW TLV. SELECT IN ACCORDANCE WITH PROVINCIAL REGULATIONS,
LOCAL BYLAWS OR GUIDELINES. SELECTION SHOULD BE BASED ON THE CURRENT CSA
STANDARD Z94.4, "SELECTION, CARE, AND USE OF RESPIRATORS." RESPIRATORS
SHOULD ALSO BE APPROVED BY NIOSH AND MSHA. FOR EMERGENCIES OR INSTANCES
WITH UNKNOWN EXPOSURE LEVELS, USE A SELF-CONTAINED BREATHING APPARATUS
(SCBA).
THERMAL HAZARD PROTECTION:
WEAR COLD INSULATING GLOVES WHEN TRANSFILLING OR BREAKING TRANSFER
CONNECTIONS.
| SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES | |
9.1. INFORMATION ON BASIC PHYSICAL AND CHEMICAL PROPERTIES:
PHYSICAL STATE: GAS
APPEARANCE: COLORLESS, ODORLESS GAS.
MOLECULAR MASS: 28.85 G/MOL
COLOR: COLORLESS
ODOR: NO DATA AVAILABLE
ODOR THRESHOLD: NO DATA AVAILABLE
PH: NOT APPLICABLE.
RELATIVE EVAPORATION RATE (BUTYL ACETATE=1):
RELATIVE EVAPORATION RATE (ETHER=1): NOT APPLICABLE.
MELTING POINT: NO DATA AVAILABLE
FREEZING POINT: NO DATA AVAILABLE
BOILING POINT: NO DATA AVAILABLE
CRITICAL TEMPERATURE: -140.6 DEG. C
CRITICAL PRESSURE: 3774 KPA
FLASH POINT: NO DATA AVAILABLE
RELATIVE EVAPORATION RATE (BUTYL ACETATE=1): NO DATA AVAILABLE
RELATIVE EVAPORATION RATE (ETHER=1): NOT APPLICABLE.
FLAMMABILITY (SOLID, GAS): NO DATA AVAILABLE
EXPLOSION LIMITS: NO DATA AVAILABLE
EXPLOSIVE PROPERTIES: NOT APPLICABLE.
OXIDIZING PROPERTIES: NONE.
VAPOR PRESSURE: NOT APPLICABLE.
RELATIVE DENSITY: NO DATA AVAILABLE
RELATIVE VAPOR DENSITY AT 20 DEG. C: NO DATA AVAILABLE
MOLECULAR MASS: 28.85 G/MOL
SOLUBILITY:
WATER: NO DATA AVAILABLE
LOG POW: NOT APPLICABLE.
LOG KOW: NOT APPLICABLE.
AUTO-IGNITION TEMPERATURE: NO DATA AVAILABLE
DECOMPOSITION TEMPERATURE: NO DATA AVAILABLE
VISCOSITY: NO DATA AVAILABLE
VISCOSITY, KINEMATIC: NOT APPLICABLE.
VISCOSITY, DYNAMIC: NOT APPLICABLE.
9.2. OTHER INFORMATION: NO ADDITIONAL INFORMATION AVAILABLE
| SECTION 10: STABILITY AND REACTIVITY | |
10.1. REACTIVITY:
NO REACTIVITY HAZARD OTHER THAN THE EFFECTS DESCRIBED IN SUB-SECTIONS
BELOW.
10.2. CHEMICAL STABILITY: STABLE UNDER NORMAL CONDITIONS.
10.3. POSSIBILITY OF HAZARDOUS REACTIONS: NONE.
10.4. CONDITIONS TO AVOID: NONE.
10.5. INCOMPATIBLE MATERIALS: NONE.
10.6. HAZARDOUS DECOMPOSITION PRODUCTS: NONE.
| SECTION 11: TOXICOLOGICAL INFORMATION | |
11.1. INFORMATION ON TOXICOLOGICAL EFFECTS:
ACUTE TOXICITY: NOT CLASSIFIED
SKIN CORROSION/IRRITATION: NOT CLASSIFIED
PH: NOT APPLICABLE.
SERIOUS EYE DAMAGE/IRRITATION: NOT CLASSIFIED
PH: NOT APPLICABLE.
RESPIRATORY OR SKIN SENSITIZATION: NOT CLASSIFIED
GERM CELL MUTAGENICITY: NOT CLASSIFIED
CARCINOGENICITY: NOT CLASSIFIED
REPRODUCTIVE TOXICITY: NOT CLASSIFIED
SPECIFIC TARGET ORGAN TOXICITY - SINGLE EXPOSURE: NOT CLASSIFIED
SPECIFIC TARGET ORGAN TOXICITY - REPEATED EXPOSURE: NOT CLASSIFIED
ASPIRATION HAZARD: NOT CLASSIFIED
| SECTION 12: ECOLOGICAL INFORMATION | |
12.1. TOXICITY:
ECOLOGY - GENERAL: NO KNOWN ECOLOGICAL DAMAGE CAUSED BY THIS PRODUCT.
12.2. PERSISTENCE AND DEGRADABILITY:
PTG-4008:
PERSISTENCE AND DEGRADABILITY:
NO ECOLOGICAL DAMAGE CAUSED BY THIS PRODUCT.
AIR (132259-10-0):
PERSISTENCE AND DEGRADABILITY:
NO ECOLOGICAL DAMAGE CAUSED BY THIS PRODUCT.
12.3. BIOACCUMULATIVE POTENTIAL:
PTG-4008:
LOG POW: NOT APPLICABLE.
LOG KOW: NOT APPLICABLE.
BIOACCUMULATIVE POTENTIAL: NO ECOLOGICAL DAMAGE CAUSED BY THIS PRODUCT.
AIR (132259-10-0):
LOG POW: NOT APPLICABLE FOR INORGANIC GASES.
BIOACCUMULATIVE POTENTIAL: NO ECOLOGICAL DAMAGE CAUSED BY THIS PRODUCT.
12.4. MOBILITY IN SOIL:
PTG-4008:
MOBILITY IN SOIL: NO DATA AVAILABLE.
AIR (132259-10-0):
ECOLOGY - SOIL: NO ECOLOGICAL DAMAGE CAUSED BY THIS PRODUCT.
12.5. OTHER ADVERSE EFFECTS:
EFFECT ON OZONE LAYER: NONE.
EFFECT ON THE GLOBAL WARMING: NO KNOWN EFFECTS FROM THIS PRODUCT.
| SECTION 13: DISPOSAL CONSIDERATIONS | |
13.1. WASTE TREATMENT METHODS:
PRODUCT/PACKAGING DISPOSAL RECOMMENDATIONS:
DO NOT ATTEMPT TO DISPOSE OF RESIDUAL OR UNUSED QUANTITIES. RETURN
CONTAINER TO SUPPLIER.
| SECTION 14: TRANSPORT INFORMATION | |
DEPARTMENT OF TRANSPORTATION (DOT):
IN ACCORDANCE WITH DOT:
TRANSPORT DOCUMENT DESCRIPTION: UN1002 AIR, COMPRESSED, 2.2
UN-NO.(DOT): UN1002
PROPER SHIPPING NAME (DOT): AIR, COMPRESSED
CLASS (DOT): 2.2 - CLASS 2.2 - NON-FLAMMABLE COMPRESSED GAS 49 CFR 173.115
HAZARD LABELS (DOT): 2.2 - NON-FLAMMABLE GAS
DOT PACKAGING NON BULK (49 CFR 173.XXX): 302
DOT PACKAGING BULK (49 CFR 173.XXX): 302
DOT SPECIAL PROVISIONS (49 CFR 172.102):
78 - THIS ENTRY MAY NOT BE USED TO DESCRIBE COMPRESSED AIR WHICH CONTAINS
MORE THAN 23.5 PERCENT OXYGEN. AN OXIDIZER LABEL IS NOT REQUIRED FOR ANY
OXYGEN CONCENTRATION OF 23.5 PERCENT OR LESS.
DOT PACKAGING EXCEPTIONS (49 CFR 173.XXX): 306;307
DOT QUANTITY LIMITATIONS PASSENGER AIRCRAFT/RAIL (49 CFR 172.101 HMT,
COLUMN 9A): 75 KG
DOT QUANTITY LIMITATIONS CARGO AIRCRAFT ONLY (49 CFR 172.101 HMT,
COLUMN 9B): 150 KG
DOT VESSEL STOWAGE LOCATION:
A - THE MATERIAL MAY BE STOWED ''ON DECK'' OR ''UNDER DECK'' ON A CARGO
VESSEL AND ON A PASSENGER VESSEL.
ADDITIONAL INFORMATION:
EMERGENCY RESPONSE GUIDE (ERG) NUMBER: 122
OTHER INFORMATION: NO SUPPLEMENTARY INFORMATION AVAILABLE.
SPECIAL TRANSPORT PRECAUTIONS:
AVOID TRANSPORT ON VEHICLES WHERE THE LOAD SPACE IS NOT SEPARATED FROM
THE DRIVER'S COMPARTMENT. ENSURE VEHICLE DRIVER IS AWARE OF THE POTENTIAL
HAZARDS OF THE LOAD AND KNOWS WHAT TO DO IN THE EVENT OF AN ACCIDENT OR AN
EMERGENCY. BEFORE TRANSPORTING PRODUCT CONTAINERS:
- ENSURE THERE IS ADEQUATE VENTILATION. - ENSURE THAT CONTAINERS ARE
FIRMLY SECURED. - ENSURE CYLINDER VALVE IS CLOSED AND NOT LEAKING.
- ENSURE VALVE OUTLET CAP NUT OR PLUG (WHERE PROVIDED) IS CORRECTLY
FITTED. - ENSURE VALVE PROTECTION DEVICE (WHERE PROVIDED) IS CORRECTLY
FITTED.
IN ACCORDANCE WITH TDG:
TRANSPORTATION OF DANGEROUS GOODS:
UN-NO. (TDG): UN1002
PROPER SHIPPING NAME (TRANSPORTATION OF DANGEROUS GOODS): AIR, COMPRESSED
TDG PRIMARY HAZARD CLASSES:
2.2 - CLASS 2.2 - NON-FLAMMABLE, NON-TOXIC GAS.
EXPLOSIVE LIMIT AND LIMITED QUANTITY INDEX: 0.125 L
PASSENGER CARRYING ROAD VEHICLE OR PASSENGER CARRYING RAILWAY VEHICLE
INDEX: 75 L
TRANSPORT BY SEA:
UN-NO. (IMDG): 1002
PROPER SHIPPING NAME (IMDG): AIR, COMPRESSED
CLASS (IMDG): 2.2 - NON-FLAMMABLE, NON-TOXIC GASES
LIMITED QUANTITIES (IMDG): 120ML
EMS-NO. (1): F-C
MFAG-NO: NONE.
EMS-NO. (2): S-V
AIR TRANSPORT:
UN-NO. (IATA): 1002
PROPER SHIPPING NAME (IATA): AIR, COMPRESSED
CLASS (IATA): 2
INSTRUCTION "CARGO" (ICAO): 200
INSTRUCTION "PASSENGER" (ICAO): 200
INSTRUCTION "PASSENGER" - LIMITED QUANTITIES (ICAO): FORBIDDEN
| SECTION 15: REGULATORY INFORMATION | |
15.1. US FEDERAL REGULATIONS:
AIR (132259-10-0):
LISTED ON THE UNITED STATES TSCA (TOXIC SUBSTANCES CONTROL ACT) INVENTORY
15.2. INTERNATIONAL REGULATIONS:
CANADA:
AIR (132259-10-0):
WHMIS CLASSIFICATION: CLASS A - COMPRESSED GAS
EU-REGULATIONS: NO ADDITIONAL INFORMATION AVAILABLE
CLASSIFICATION ACCORDING TO REGULATION (EC) NO. 1272/2008 [CLP]:
PRESS. GAS (COMP.): H280
CLASSIFICATION ACCORDING TO DIRECTIVE 67/548/EEC [DSD] OR 1999/45/EC [DPD]:
NOT CLASSIFIED
NATIONAL REGULATIONS:
AIR (132259-10-0):
LISTED ON IECSC (INVENTORY OF EXISTING CHEMICAL SUBSTANCES PRODUCED OR
IMPORTED IN CHINA)
LISTED ON NZIOC (NEW ZEALAND INVENTORY OF CHEMICALS)
15.3. US STATE REGULATIONS: NO ADDITIONAL INFORMATION AVAILABLE
| SECTION 16: OTHER INFORMATION | |
REVISION DATE: 09/25/2019
OTHER INFORMATION:
WHEN YOU MIX TWO OR MORE CHEMICALS, YOU CAN CREATE ADDITIONAL, UNEXPECTED
HAZARDS. OBTAIN AND EVALUATE THE SAFETY INFORMATION FOR EACH COMPONENT
BEFORE YOU PRODUCE THE MIXTURE. CONSULT AN INDUSTRIAL HYGIENIST OR OTHER
TRAINED PERSON WHEN YOU EVALUATE THE END PRODUCT. BEFORE USING ANY
PLASTICS, CONFIRM THEIR COMPATIBILITY WITH THIS PRODUCT.
PRAXAIR ASKS USERS OF THIS PRODUCT TO STUDY THIS SDS AND BECOME AWARE OF
THE PRODUCT HAZARDS AND SAFETY INFORMATION. TO PROMOTE SAFE USE OF THIS
PRODUCT, A USER SHOULD
(1) NOTIFY EMPLOYEES, AGENTS, AND CONTRACTORS OF THE INFORMATION IN THIS
SDS AND OF ANY OTHER KNOWN PRODUCT HAZARDS AND SAFETY INFORMATION,
(2) FURNISH THIS INFORMATION TO EACH PURCHASER OF THE PRODUCT, AND
(3) ASK EACH PURCHASER TO NOTIFY ITS EMPLOYEES AND CUSTOMERS OF THE
PRODUCT HAZARDS AND SAFETY INFORMATION.
THE OPINIONS EXPRESSED HEREIN ARE THOSE OF QUALIFIED EXPERTS WITHIN
PRAXAIR, INC. WE BELIEVE THAT THE INFORMATION CONTAINED HEREIN IS CURRENT
AS OF THE DATE OF THIS SAFETY DATA SHEET. SINCE THE USE OF THIS
INFORMATION AND THE CONDITIONS OF USE ARE NOT WITHIN THE CONTROL OF
PRAXAIR, INC, IT IS THE USER'S OBLIGATION TO DETERMINE THE CONDITIONS
OF SAFE USE OF THE PRODUCT.
PRAXAIR SDSS ARE FURNISHED ON SALE OR DELIVERY BY PRAXAIR OR THE
INDEPENDENT DISTRIBUTORS AND SUPPLIERS WHO PACKAGE AND SELL OUR PRODUCTS.
TO OBTAIN CURRENT SDSS FOR THESE PRODUCTS, CONTACT YOUR PRAXAIR SALES
REPRESENTATIVE, LOCAL DISTRIBUTOR, OR SUPPLIER, OR DOWNLOAD FROM
WWW.PRAXAIR.COM. IF YOU HAVE QUESTIONS REGARDING PRAXAIR SDSS, WOULD
LIKE THE DOCUMENT NUMBER AND DATE OF THE LATEST SDS, OR WOULD LIKE THE
NAMES OF THE PRAXAIR SUPPLIERS IN YOUR AREA, PHONE OR WRITE THE PRAXAIR
CALL CENTER (PHONE: 1-800-PRAXAIR/1-800-772-9247;
ADDRESS: PRAXAIR CALL CENTER, PRAXAIR, INC, P.O. BOX 44, TONAWANDA, NY
14151-0044).
PRAXAIR AND THE FLOWING AIRSTREAM DESIGN ARE TRADEMARKS OR REGISTERED
TRADEMARKS OF PRAXAIR TECHNOLOGY, INC. IN THE UNITED STATES AND/OR OTHER
COUNTRIES.
SDS US_AND_CANADA
THIS INFORMATION IS BASED ON OUR CURRENT KNOWLEDGE AND IS INTENDED TO
DESCRIBE THE PRODUCT FOR THE PURPOSES OF HEALTH, SAFETY AND ENVIRONMENTAL
REQUIREMENTS ONLY. IT SHOULD NOT THEREFORE BE CONSTRUED AS GUARANTEEING
ANY SPECIFIC PROPERTY OF THE PRODUCT.
EN (ENGLISH US)
SDS ID: PTG-4008