| Common Name: | MS-143XD, DPMS-Z0625B, PTFE RELEASE AGENT/DRY LUBRICANT |
| Manufacturer: | MILLER-STEPHENSON CHEMICAL |
| SDS Revision Date: | 8/1/2019 |
| SDS Format: | GHS-US |
| Item Number(s): | 35RN31, 35RN32, 35RN33, 35RN34 |
| Manufacturer Model Number(s): |
SDS Table of Contents
Click the desired link below to jump directly to that section in the SDS.
MS(TM)
MILLER-STEPHENSON
SDS
SAFETY DATA SHEET
| 1. CHEMICAL PRODUCT/COMPANY IDENTIFICATION |  |
NAME:
MS-143XD
DPMS-Z0625B
PTFE RELEASE AGENT/DRY LUBRICANT
PRODUCT USE: RELEASE AGENT OR DRY LUBRICANT
MANUFACTURER/DISTRIBUTOR:
MILLER-STEPHENSON CHEMICAL
55 BACKUS AVE.
DANBURY, CONN. 06810
USA
(203) 743-4447
EMERGENCY PHONE NUMBER: (800) 424-9300
| 2. HAZARDS IDENTIFICATION | |
GHS CLASSIFICATION IN ACCORDANCE WITH 29 CFR 1910.1200:
NOT A HAZARDOUS SUBSTANCE OR MIXTURE.
GHS LABEL ELEMENTS: NOT A HAZARDOUS SUBSTANCE OR MIXTURE.
OTHER HAZARDS WHICH DO NOT RESULT IN CLASSIFICATION OR ARE NOT COVERED BY
GHS:
THE THERMAL DECOMPOSITION VAPORS OF FLUORINATED PLASTICS MAY CAUSE POLYMER
FUME FEVER WITH FLU-LIKE SYMPTOMS IN HUMANS, ESPECIALLY WHEN SMOKING
CONTAMINATED TOBACCO.
| 3. INGREDIENTS | |
MATERIAL(S) CAS NO. APPROXIMATE %
1,1,1,2,2,3,4,5,5,5-DECAFLUOROPENTANE 138495-42-8 95 - 98
HAZARDOUS INGREDIENTS:
NO HAZARDOUS INGREDIENTS. THIS PRODUCT DOES NOT CONTAIN ANY COMPONENTS THAT
REQUIRE DISCLOSURE ACCORDING TO OSHA HAZARD COMMUNICATION STANDARD 2012.
| 4. FIRST AID MEASURES | |
INHALATION:
REMOVE PATIENT TO FRESH AIR. GET MEDICAL ATTENTION IF NECESSARY.
EYE:
FLUSH WITH A LARGE AMOUNT OF WATER. GET MEDICAL ATTENTION IF IRRITATION
DEVELOPS AND PERSISTS.
SKIN:
WASH SKIN WITH SOAP AND WATER AFTER CONTACT. GET MEDICAL ATTENTION IF
SYMPTOMS OCCUR.
ORAL:
IF SWALLOWED, DO NOT INDUCE VOMITING. RINSE MOUTH THOROUGHLY WITH WATER.
GET MEDICAL ATTENTION IF SYMPTOMS OCCUR.
NOTE TO PHYSICIAN: TREAT SYMPTOMATICALLY AND SUPPORTIVELY
| 5. FIRE FIGHTING MEASURES | |
FLASH POINT: DOES NOT FLASH
METHOD: TCC
SUITABLE EXTINGUISHING MEDIA:
WATER SPRAY, ALCOHOL-RESISTANT FOAM, CARBON DIOXIDE (CO2), DRY CHEMICAL.
UNSUITABLE EXTINGUISHING MEDIA: NONE KNOWN.
SPECIFIC HAZARDS DURING FIRE-FIGHTING:
EXPOSURE TO COMBUSTION PRODUCTS MAY BE A HAZARD TO HEALTH.
HAZARDOUS COMBUSTION PRODUCTS:
HYDROGEN FLUORIDE, CARBONYL FLUORIDE, CARBON OXIDES, POTENTIALLY TOXIC
FLUORINATED COMPOUNDS, AEROSOLIZED PARTICULATES.
SPECIFIC EXTINGUISHING METHODS:
USE EXTINGUISHING MEASURES THAT ARE APPROPRIATE TO LOCAL CIRCUMSTANCES AND
THE SURROUNDING ENVIRONMENT. USE WATER SPRAY TO COOL UNOPENED CONTAINERS.
REMOVE UNDAMAGED CONTAINERS FROM THE FIRE AREA IF IT IS SAFE TO DO SO.
EVACUATE AREA.
SPECIAL PROTECTIVE EQUIPMENT FOR FIRE-FIGHTERS:
SELF-CONTAINED BREATHING APPARATUS (SCBA) MAYBE REQUIRED IF NECESSARY. USE
PERSONAL PROTECTIVE EQUIPMENT.
| 6. ACCIDENTAL RELEASE MEASURES | |
PERSONAL PRECAUTIONS, PROTECTIVE EQUIPMENT AND EMERGENCY PROCEDURES:
FOLLOW SAFE HANDLING ADVICE AND PERSONAL PROTECTIVE EQUIPMENT
RECOMMENDATIONS.
ENVIRONMENTAL PRECAUTIONS:
DISCHARGE INTO THE ENVIRONMENT MUST BE AVOIDED. PREVENT FURTHER LEAKAGE OR
SPILLAGE TO DO SO. PREVENT SPREADING OVER A WIDE AREA (E.G. BY CONTAINMENT
OR OIL BARRIERS). RETAIN AND DISPOSE OF CONTAMINATED WASH WATER. LOCAL
AUTHORITIES SHOULD BE ADVISED IF SIGNIFICANT SPILLAGES CANNOT BE CONTAINED.
METHODS AND MATERIALS FOR CONTAINMENT AND CLEANING UP:
SOAK UP WITH INERT ABSORBENT MATERIAL. FOR LARGE SPILLS, PROVIDE DIKING AND
OTHER APPROPRIATE CONTAINMENT TO KEEP MATERIAL FROM SPREADING. IF DIKED
MATERIAL CAN BE PUMPED, STORE RECOVERED MATERIAL IN APPROPRIATE CONTAINER.
CLEAN UP REMAINING MATERIALS FROM SPILL WITH SUITABLE ABSORBENT. LOCAL OR
NATIONAL REGULATIONS MAY APPLY TO RELEASES AND DISPOSAL OF THIS MATERIAL,
AS WELL AS THOSE MATERIALS AND ITEMS EMPLOYED IN THE CLEANUP OF RELEASES.
YOU WILL NEED TO DETERMINE WHICH REGULATIONS ARE APPLICABLE. SECTIONS 13
AND 15 PROVIDE INFORMATION REGARDING CERTAIN LOCAL OR NATIONAL
REQUIREMENTS.
| 7. HANDLING AND STORAGE | |
HANDLING:
USE IN A WELL-VENTILATED AREA TO AVOID BREATHING VAPORS. VAPORS ARE HEAVIER
THAN AIR AND ACCUMULATE IN LOW AREAS. USE ONLY WITH ADEQUATE VENTILATION.
WHERE VENTILATION IS INADEQUATE, USE APPROPRIATE RESPIRATORY PROTECTION.
AVOID CONTACT WITH SKIN EYES, CLOTHING. WASH THOROUGHLY AFTER HANDLING. DO
NOT STORE OR CONSUME FOOD, DRINK, OR TOBACCO IN AREAS WHERE THEY MAY BECOME
CONTAMINATED WITH THIS MATERIAL.
STORAGE CONDITIONS:
STORE IN A WELL-VENTILATED PLACE AND KEEP CONTAINER TIGHTLY CLOSED. DO NOT
ALLOW STORED PRODUCT TO EXCEED 52 DEG. C (125 DEG. F) TO PREVENT LEAKAGE OR
POTENTIAL RUPTURE OF CONTAINER FROM PRESSURE AND EXPANSION. FREEZING WILL
AFFECT THE PHYSICAL CONDITION BUT WILL NOT DAMAGE THE MATERIAL. THAW AND
MIX BEFORE USING.
| 8. EXPOSURE CONTROLS/PERSONAL PROTECTION | |
RESPIRATORY PROTECTION:
GENERAL AND LOCAL EXHAUST VENTILATION IS RECOMMENDED TO MAINTAIN VAPOR
EXPOSURES BELOW RECOMMENDED LIMITS. WHERE CONCENTRATIONS ARE ABOVE
RECOMMENDED LIMITS OR ARE UNKNOWN, APPROPRIATE RESPIRATORY PROTECTION
SHOULD BE WORN. FOLLOW OSHA RESPIRATOR REGULATIONS (29 CFR 1910.134) AND
USE NIOSH/MSHA APPROVED RESPIRATORS. PROTECTION PROVIDED BY AIR PURIFYING
RESPIRATORS AGAINST EXPOSURE TO ANY HAZARDOUS CHEMICAL IS LIMITED. USE A
POSITIVE PRESSURE AIR SUPPLIED RESPIRATOR IF THERE IS ANY POTENTIAL FOR
UNCONTROLLED RELEASE, EXPOSURE LEVELS ARE UNKNOWN, OR ANY OTHER
CIRCUMSTANCE WHERE AIR PURIFYING RESPIRATORS MAY NOT PROVIDE ADEQUATE
PROTECTION
EYE PROTECTION:
AVOID EYE CONTACT. USE CHEMICAL GOGGLES OR SAFETY GLASSES WITH SIDE
SHIELDS.
SKIN PROTECTION:
AVOID CONTACT WITH SKIN. USE GLOVES IMPERVIOUS SHOULD BE USED WHEN HANDLING
LIQUID. WASH SKIN AFTER CONTACT.
HYGIENE MEASURES:
DO NOT EAT, DRINK OR SMOKE WHEN USING THIS PRODUCT. WASH EXPOSED AREAS
THOROUGHLY WITH SOAP AND WATER. WASH CONTAMINATED CLOTHING BEFORE RE-USE.
| 9. PHYSICAL AND CHEMICAL PROPERTIES | |
BOILING POINT: 131 DEG. F/55 DEG. C APPROX.
PERCENT VOLATILE BY VOLUME: 97%
DENSITY: 1.6 G/CC AT 68 DEG. F/20 DEG. C
VAPOR PRESSURE: 226 MM Hg AT 77 DEG. F/25 DEG. C
VAPOR DENSITY (AIR=1): N.A.
SOLUBILITY IN H2O: INSOLUBLE
PH INFORMATION: NEUTRAL
EVAPORATION RATE (CC14=1): N.A.
FORM: LIQUID
APPEARANCE: MILKY
COLOR: WHITE
ODOR: FAINT ETHEREAL ODOR
| 10. STABILITY AND REACTIVITY | |
STABILITY: STABLE AT NORMAL TEMPERATURES AND STORAGE CONDITIONS.
INCOMPATIBLE MATERIALS AND CONDITIONS TO AVOID: NONE KNOWN.
POSSIBILITY OF HAZARDOUS REACTIONS:
HAZARDOUS DECOMPOSITION PRODUCTS WILL BE FORMED AT ELEVATED TEMPERATURES.
HAZARDOUS DECOMPOSITION PRODUCTS:
HYDROFLUORIC ACID, CARBONYL DIFLUORIDE, CARBON DIOXIDE, AND CARBON
MONOXIDE.
| 11. TOXICOLOGICAL INFORMATION | |
1,1,1,2,2,3,4,5,5,5-DECAFLUOROPENTANE:
INFORMATION ON LIKELY ROUTES OF EXPOSURE:
INHALATION, SKIN CONTACT, INGESTION, EYE CONTACT
ACUTE TOXICITY: NOT CLASSIFIED BASED ON AVAILABLE INFORMATION.
SKIN CORROSION/IRRITATION: NOT CLASSIFIED BASED ON AVAILABLE INFORMATION.
SERIOUS EYE IRRITATION/ EYE IRRITATION:
NOT CLASSIFIED BASED ON AVAILABLE INFORMATION.
SKIN SENSITIZATION: NOT CLASSIFIED BASED ON AVAILABLE INFORMATION.
RESPIRATORY SENSITIZATION: NOT CLASSIFIED BASED ON AVAILABLE INFORMATION
GERM CELL MUTAGENICITY: NOT CLASSIFIED BASED ON AVAILABLE INFORMATION.
CARCINOGENICITY: NOT CLASSIFIED BASED ON AVAILABLE INFORMATION.
REPRODUCTIVE TOXICITY: NOT CLASSIFIED BASED ON AVAILABLE INFORMATION.
STOT-SINGLE EXPOSURE: NOT CLASSIFIED BASED ON AVAILABLE INFORMATION.
STOT-REPEATED EXPOSURE: NOT CLASSIFIED BASED ON AVAILABLE INFORMATION.
ASPIRATION TOXICITY: NOT CLASSIFIED BASED ON AVAILABLE INFORMATION.
| 12. ECOLOGICAL INFORMATION | |
1,1,1,2,2,3,4,5,5,5-DECAFLUOROPENTANE:
ECOTOXICITY: NO DATA AVAILABLE
PERSISTENCE AND DEGRADABILITY: NO DATA AVAILABLE
BIOACCUMULATIVE POTENTIAL: NO DATA AVAILABLE
MOBILITY IN SOIL: NO DATA AVAILABLE
OTHER ADVERSE EFFECTS:
RESULTS OF PBT AND VPVB ASSESSMENT:
THIS SUBSTANCE IS NOT CONSIDERED TO BE PERSISTENT, BIOACCUMULATING AND
TOXIC (PBT). THIS SUBSTANCE IS NOT CONSIDERED TO BE VERY PERSISTENT AND
VERY BIOACCUMULATING (VPVB).
| 13. DISPOSAL CONSIDERATIONS | |
COMPLY WITH FEDERAL, STATE AND LOCAL REGULATIONS. REMOVE TO A PERMITTED
WASTE DISPOSAL FACILITY.
| 14. TRANSPORT INFORMATION | |
U.S. DOT: NOT REGULATED
IATA: NOT REGULATED
IMDG: NOT REGULATED
| 15. REGULATORY INFORMATION | |
U.S. FEDERAL REGULATIONS:
TSCA: ALL INGREDIENTS ARE LISTED IN TSCA INVENTORY.
1,1,1,2,2,3,4,5,5,5-DECAFLUOROPENTANE (CAS# 138495-42-8):
THE UNITED STATES ENVIRONMENTAL PROTECTION AGENCY HAS ESTABLISHED A
SIGNIFICANT NEW USE RULE (SNUR; 40 CFR 721.5645) FOR THIS PRODUCT. ALSO,
THIS PRODUCT REQUIRES AN EXPORT NOTIFICATION UNDER TSCA SECTION 12(B) AND
40 CFR PART 707 SUBPART D.
SARA 304 EXTREMELY HAZARDOUS SUBSTANCES REPORTABLE QUANTITY:
THIS MATERIAL DOES NOT CONTAIN ANY COMPONENTS WITH A SECTION 304 EHS RQ.
SARA 302 EXTREMELY HAZARDOUS SUBSTANCES THRESHOLD PLANNING QUANTITY:
THIS MATERIAL DOES NOT CONTAIN ANY COMPONENTS WITH A SECTION 302 EHS RQ.
SARA 311/312 HAZARDS: NO SARA HAZARDS
SARA 313 REGULATED CHEMICALS:
THIS MATERIAL DOES NOT CONTAIN ANY CHEMICAL COMPONENTS WITH KNOWN CAS
NUMBERS THAT EXCEED THE THRESHOLD (DE MINIMIS) REPORTING LEVELS ESTABLISHED
BY SARA TITLE III, SECTION 313.
U.S. STATE REGULATIONS:
CALIFORNIA PROP. 65:
WARNING:
THIS PRODUCT CAN EXPOSE YOU TO CHEMICALS INCLUDING 2,2'-IMINODIETHANOL,
WHICH IS/ARE KNOWN TO THE STATE OF CALIFORNIA TO CAUSE CANCER, AND
PENTADECAFLUOROOCTANOIC ACID, WHICH IS/ARE KNOWN TO THE STATE OF CALIFORNIA
TO CAUSE BIRTH DEFECTS OR OTHER REPRODUCTIVE HARM. FOR MORE INFORMATION GO
TO WWW.P65WARNINGS.CA.GOV.
| 16. OTHER INFORMATION | |
NPCA-HMIS RATINGS:
HEALTH 0
FLAMMABILITY 0
REACTIVITY 0
PERSONAL PROTECTIVE RATING TO BE SUPPLIED BY USER DEPENDING ON THE
CONDITIONS.
FOR INDUSTRIAL USE ONLY
REVISION DATE: AUGUST 2019
THE INFORMATION PROVIDED IN THIS SAFETY DATA SHEET IS CORRECT TO THE BEST
OF OUR KNOWLEDGE, INFORMATION AND BELIEF AT THE DATE OF ITS PUBLICATION.
THE INFORMATION GIVEN IS DESIGNED ONLY AS A GUIDANCE FOR SAFE HANDLING,
USE, PROCESSING, STORAGE, TRANSPORTATION, DISPOSAL AND RELEASE AND IS NOT
TO BE CONSIDERED A WARRANTY OR QUALITY SPECIFICATION. THE INFORMATION
RELATES ONLY TO THE SPECIFIC MATERIAL DESIGNATED AND MAY NOT BE VALID FOR
SUCH MATERIAL USED IN COMBINATION WITH ANY OTHER MATERIALS OR IN ANY
PROCESS, UNLESS SPECIFIED IN THE TEXT. FINAL DETERMINATION OF SUITABILITY
OF ANY MATERIAL IS THE SOLE RESPONSIBILITY OF THE USER.