| Common Name: | HOT MELT |
| Manufacturer: | FPC |
| SDS Revision Date: | 8/14/2015 |
| SDS Format: | GHS-US |
| Item Number(s): | 35ZD86, 35ZD87, 618J87 |
| Manufacturer Model Number(s): |
SDS Table of Contents
Click the desired link below to jump directly to that section in the SDS.
FPC
SAFETY DATA SHEET
10154
HOT MELT
REVISION DATE: 14-AUG-2015
SUPERSEDES DATE: NO INFORMATION AVAILABLE
VERSION: 1.01
| SECTION 1: IDENTIFICATION OF THE SUBSTANCE/MIXTURE |  |
AND OF THE COMPANY/UNDERTAKING
1.1. PRODUCT IDENTIFIER:
PRODUCT NAME: HOT MELT
PRODUCT CODE: 10154
PRODUCT(S) COVERED:
AT-10154, B-10154
HOT MELT
1.2. RELEVANT IDENTIFIED USES OF THE SUBSTANCE OR MIXTURE AND USES
ADVISED AGAINST:
RECOMMENDED USE: NO INFORMATION AVAILABLE.
USES ADVISED AGAINST: NO INFORMATION AVAILABLE
1.3. DETAILS OF THE SUPPLIER OF THE SAFETY DATA SHEET:
COMPANY NAME:
FPC CORPORATION
355 HOLLOW HILL DR
WAUCONDA, IL 60084
USA
PHONE: +1 (847) 487-4583
FAX: +1 (847) 487-0174
| SECTION 2: HAZARDS IDENTIFICATION | |
2.1. CLASSIFICATION OF THE SUBSTANCE OR MIXTURE:
NOT A DANGEROUS SUBSTANCE OR MIXTURE ACCORDING TO OSHA 29 CFR 1910.1200
2.2. LABEL ELEMENTS:
EMERGENCY OVERVIEW:
CONTACT WITH SOLID MATERIAL MAY CAUSE IRRITATION
CONTACT WITH MOLTEN MATERIAL WILL CAUSE THERMAL BURNS
NOT A DANGEROUS SUBSTANCE OR MIXTURE ACCORDING TO OSHA 29 CFR 1910.1200.
APPEARANCE: NO INFORMATION AVAILABLE
PHYSICAL STATE: SOLID
ODOR: NO INFORMATION AVAILABLE
HAZARDS NOT OTHERWISE CLASSIFIED (HNOC): NOT APPLICABLE
UNKNOWN TOXICITY:
56.96% OF THE MIXTURE CONSISTS OF INGREDIENT(S) OF UNKNOWN TOXICITY
2.3. OTHER INFORMATION: MAY BE HARMFUL IN CONTACT WITH SKIN
| SECTION 3: COMPOSITION/INFORMATION ON INGREDIENTS | |
3.1 SUBSTANCES:
THIS PRODUCT IS A MIXTURE. HEALTH HAZARD INFORMATION IS BASED ON ITS
COMPONENTS.
3.2 MIXTURES:
NOT A DANGEROUS SUBSTANCE OR MIXTURE ACCORDING TO OSHA 29 CFR 1910.1200.
| SECTION 4: FIRST AID MEASURES | |
4.1. DESCRIPTION OF FIRST AID MEASURES:
EYE CONTACT:
RINSE THOROUGHLY WITH PLENTY OF WATER FOR AT LEAST 15 MINUTES, LIFTING
LOWER AND UPPER EYELIDS. CONSULT A PHYSICIAN.
SKIN CONTACT:
WASH SKIN WITH SOAP AND WATER. IN CASE OF BURNS, IMMEDIATELY COOL AFFECTED
SKIN FOR AS LONG AS POSSIBLE WITH COLD WATER. DO NOT REMOVE CLOTHING IF
ADHERING TO SKIN. REMOVAL OF SOLIDIFIED MOLTEN MATERIAL FROM SKIN REQUIRES
MEDICAL ASSISTANCE. CONSULT A PHYSICIAN IF NECESSARY.
INHALATION: REMOVE TO FRESH AIR.
INGESTION:
SEEK MEDICAL ADVICE IMMEDIATELY. DO NOT INDUCE VOMITING WITHOUT MEDICAL
ADVICE.
4.2. MOST IMPORTANT SYMPTOMS AND EFFECTS, BOTH ACUTE AND DELAYED:
SYMPTOMS: NO INFORMATION AVAILABLE.
4.3. INDICATION OF ANY IMMEDIATE MEDICAL ATTENTION AND SPECIAL TREATMENT
NEEDED:
NOTE TO PHYSICIANS: TREAT SYMPTOMATICALLY.
4.4. REFERENCE TO OTHER SECTIONS:
REFERENCE TO OTHER SECTIONS:
SECTION 8: EXPOSURE CONTROLS/PERSONAL PROTECTION
SECTION 11: TOXICOLOGICAL INFORMATION
| SECTION 5: FIRE FIGHTING MEASURES | |
5.1. EXTINGUISHING MEDIA:
SUITABLE EXTINGUISHING MEDIA:
IN CASE OF FIRE: USE CO2, DRY CHEMICAL, OR FOAM TO EXTINGUISH.
UNSUITABLE EXTINGUISHING MEDIA:
DO NOT USE A SOLID WATER STREAM AS IT MAY SCATTER AND SPREAD FIRE.
5.2. SPECIAL HAZARDS ARISING FROM THE SUBSTANCE OR MIXTURE:
SPECIFIC HAZARDS ARISING FROM THE CHEMICAL:
SHOULD A SPARK OCCUR NEAR FLAMMABLE VAPORS OR AIRBORNE DUST MIXTURES, AN
EXPLOSION COULD OCCUR RESULTING IN INJURY OR DEATH. THIS PRODUCT MAY
RETAIN A STATIC ELECTRICAL CHARGE, WHICH COULD PRODUCE A SPARK.
EXPLOSION DATA:
SENSITIVITY TO MECHANICAL IMPACT: NONE.
SENSITIVITY TO STATIC DISCHARGE: NONE.
5.3. ADVICE FOR FIREFIGHTERS:
PROTECTIVE EQUIPMENT AND PRECAUTIONS FOR FIREFIGHTERS:
AS IN ANY FIRE, WEAR SELF-CONTAINED BREATHING APPARATUS PRESSURE-DEMAND,
MSHA/NIOSH (APPROVED OR EQUIVALENT) AND FULL PROTECTIVE GEAR.
| SECTION 6: ACCIDENTAL RELEASE MEASURES | |
6.1. PERSONAL PRECAUTIONS, PROTECTIVE EQUIPMENT AND EMERGENCY PROCEDURES:
PERSONAL PRECAUTIONS:
ENSURE ADEQUATE VENTILATION, ESPECIALLY IN CONFINED AREAS.
6.2. ENVIRONMENTAL PRECAUTIONS:
ENVIRONMENTAL PRECAUTIONS:
KEEP OUT OF DRAINS, SEWERS, DITCHES AND WATERWAYS.
6.3. METHODS AND MATERIAL FOR CONTAINMENT AND CLEANING UP:
METHODS FOR CONTAINMENT:
PREVENT FURTHER LEAKAGE OR SPILLAGE IF SAFE TO DO SO.
METHODS FOR CLEANING UP:
TAKE UP MECHANICALLY, PLACING IN APPROPRIATE CONTAINERS FOR DISPOSAL.
CLEAN CONTAMINATED SURFACE THOROUGHLY.
SOLID:
USE PERSONAL PROTECTION EQUIPMENT. COVER WITH PLASTIC SHEET TO PREVENT
SPREADING. AVOID CREATING DUST. MOLTEN. WHERE POSSIBLE ALLOW MOLTEN
MATERIAL TO SOLIDIFY NATURALLY. TAKE UP MECHANICALLY, PLACING IN
APPROPRIATE CONTAINERS FOR DISPOSAL. CLEAN CONTAMINATED SURFACE
THOROUGHLY.
6.4. REFERENCES TO OTHER SECTIONS:
REFERENCE TO OTHER SECTIONS:
SECTION 8: EXPOSURE CONTROLS/PERSONAL PROTECTION
SECTION 7: HANDLING AND STORAGE
SECTION 13: DISPOSAL CONSIDERATIONS
| SECTION 7: HANDLING AND STORAGE | |
7.1. PRECAUTIONS FOR SAFE HANDLING:
ADVICE ON SAFE HANDLING:
AVOID CONTACT WITH SKIN, EYES OR CLOTHING. AVOID CONTACT WITH EYES AND
SKIN. USE ADEQUATE VENTILATION AND/OR ENGINEERING CONTROLS IN HIGH
TEMPERATURE PROCESSING TO PREVENT EXPOSURE TO VAPORS. AFTER CONTACT WITH
SKIN, WASH IMMEDIATELY WITH PLENTY OF WATER AND SOAP. WASH WITH PLENTY
OF WATER AND SOAP.
7.2. CONDITIONS FOR SAFE STORAGE, INCLUDING ANY INCOMPATIBILITIES:
STORAGE CONDITIONS: STORE AWAY FROM INCOMPATIBLE MATERIALS.
INCOMPATIBLE MATERIALS:
INCOMPATIBLE WITH OXIDIZING AGENTS. STRONG ACIDS. STRONG BASES.
7.3. SPECIFIC END USE(S):
OTHER INFORMATION:
SINCE EMPTY CONTAINERS RETAIN PRODUCT RESIDUE, FOLLOW LABEL WARNINGS EVEN
AFTER CONTAINER IS EMPTIED. KEEP PRODUCT AND EMPTY CONTAINER AWAY FROM HEAT
AND SOURCES OF IGNITION. DO NOT REUSE CONTAINER.
7.4. REFERENCES TO OTHER SECTIONS:
REFERENCE TO OTHER SECTIONS:
SECTION 13: DISPOSAL CONSIDERATIONS
SECTION 10: STABILITY AND REACTIVITY
| SECTION 8: EXPOSURE CONTROLS/PERSONAL PROTECTION | |
8.1. CONTROL PARAMETERS:
EXPOSURE GUIDELINES:
THIS PRODUCT, AS SUPPLIED, DOES NOT CONTAIN ANY HAZARDOUS MATERIALS WITH
OCCUPATIONAL EXPOSURE LIMITS ESTABLISHED BY THE REGION SPECIFIC REGULATORY
BODIES.
8.2. EXPOSURE CONTROLS:
ENGINEERING CONTROLS:
SHOWERS
EYEWASH STATIONS
VENTILATION SYSTEMS.
PERSONAL PROTECTIVE EQUIPMENT [PPE]:
EYE/FACE PROTECTION:
SOLID:
WEAR SAFETY GLASSES WITH SIDE SHIELDS (OR GOGGLES). MOLTEN. WEAR CHEMICAL
SPLASH GOGGLES AND FACE SHIELD WHEN EYE AND FACE CONTACT IS POSSIBLE DUE
TO SPLASHING OR SPRAYING OF MATERIAL.
SKIN AND BODY PROTECTION:
WEAR IMPERVIOUS PROTECTIVE CLOTHING, INCLUDING BOOTS, GLOVES, LAB COAT,
APRON OR COVERALLS, AS APPROPRIATE, TO PREVENT SKIN CONTACT. HEAT RESISTANT
GLOVES ARE RECOMMENDED WHEN HANDLING MOLTEN MATERIALS.
RESPIRATORY PROTECTION:
IF EXPOSURE LIMITS ARE EXCEEDED OR IRRITATION IS EXPERIENCED, NIOSH/MSHA
APPROVED RESPIRATORY PROTECTION SHOULD BE WORN. POSITIVE-PRESSURE SUPPLIED
AIR RESPIRATORS MAY BE REQUIRED FOR HIGH AIRBORNE CONTAMINANT
CONCENTRATIONS. RESPIRATORY PROTECTION MUST BE PROVIDED IN ACCORDANCE WITH
CURRENT LOCAL REGULATIONS.
GENERAL HYGIENE CONSIDERATIONS:
FACILITIES FOR QUICKLY DRENCHING THE BODY SHOULD BE PROVIDED WITHIN THE
IMMEDIATE WORK AREA FOR EMERGENCY USE WHERE THERE IS A POSSIBILITY OF
EXPOSURE.
| SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES | |
9.1. INFORMATION ON BASIC PHYSICAL AND CHEMICAL PROPERTIES:
PHYSICAL STATE: SOLID
COLOR: COLORLESS
ODOR: NO INFORMATION AVAILABLE
ODOR THRESHOLD: NO INFORMATION AVAILABLE
PROPERTY VALUES ODOR THRESHOLD
REMARKS - METHOD
PH NO INFORMATION AVAILABLE
MELTING POINT/FREEZING POINT NO INFORMATION AVAILABLE
BOILING POINT NO INFORMATION AVAILABLE
FLASH POINT >204 DEG. C /
>400 DEG. F
EVAPORATION RATE NO INFORMATION AVAILABLE
FLAMMABILITY (SOLID, GAS) NO INFORMATION AVAILABLE
FLAMMABILITY LIMITS IN AIR:
UPPER FLAMMABILITY LIMITS NO INFORMATION AVAILABLE
LOWER FLAMMABILITY LIMIT NO INFORMATION AVAILABLE
VAPOR PRESSURE NO INFORMATION AVAILABLE
VAPOR DENSITY NO INFORMATION AVAILABLE
SPECIFIC GRAVITY NO INFORMATION AVAILABLE
WATER SOLUBILITY NO INFORMATION AVAILABLE
SOLUBILITY IN OTHER SOLVENTS NO INFORMATION AVAILABLE
PARTITION COEFFICIENT NO INFORMATION AVAILABLE
AUTOIGNITION TEMPERATURE NO INFORMATION AVAILABLE
DECOMPOSITION TEMPERATURE NO INFORMATION AVAILABLE
KINEMATIC VISCOSITY NO INFORMATION AVAILABLE
DYNAMIC VISCOSITY NO INFORMATION AVAILABLE
EXPLOSIVE PROPERTIES NO INFORMATION AVAILABLE
OXIDIZING PROPERTIES NO INFORMATION AVAILABLE
9.2. OTHER INFORMATION:
SOFTENING POINT NO INFORMATION AVAILABLE
MOLECULAR WEIGHT NO INFORMATION AVAILABLE
SOLVENT CONTENT (%) NO INFORMATION AVAILABLE
SOLID CONTENT (%) NO INFORMATION AVAILABLE
DENSITY .950 G/CM3
VOC NO INFORMATION AVAILABLE
| SECTION 10: STABILITY AND REACTIVITY | |
10.1. REACTIVITY: NONE UNDER NORMAL USE CONDITIONS.
10.2. CHEMICAL STABILITY: STABLE UNDER RECOMMENDED STORAGE CONDITIONS.
10.3. POSSIBILITY OF HAZARDOUS REACTIONS:
NONE UNDER NORMAL PROCESSING.
10.4. CONDITIONS TO AVOID:
DO NOT ADD WATER OR OTHER VOLATILE MATERIAL TO MOLTEN ADHESIVE. TAKE
PRECAUTIONARY MEASURES AGAINST STATIC DISCHARGES.
10.5. INCOMPATIBLE MATERIALS:
INCOMPATIBLE WITH OXIDIZING AGENTS. STRONG ACIDS. STRONG BASES.
10.6. HAZARDOUS DECOMPOSITION PRODUCTS:
CARBON MONOXIDE. CARBON DIOXIDE (CO2). HYDROCARBONS.
| SECTION 11: TOXICOLOGICAL INFORMATION | |
11.1. INFORMATION ON TOXICOLOGICAL EFFECTS:
PRODUCT INFORMATION: NO DATA AVAILABLE
INHALATION: NO DATA AVAILABLE.
EYE CONTACT: NO DATA AVAILABLE.
SKIN CONTACT: NO DATA AVAILABLE.
INGESTION: NO DATA AVAILABLE.
DELAYED AND IMMEDIATE EFFECTS AS WELL AS CHRONIC EFFECTS FROM SHORT AND
LONG-TERM EXPOSURE:
SYMPTOMS: NO INFORMATION AVAILABLE.
SKIN CORROSION/IRRITATION: NO INFORMATION AVAILABLE.
SERIOUS EYE DAMAGE/EYE IRRITATION: NO INFORMATION AVAILABLE.
IRRITATION: NO INFORMATION AVAILABLE.
CORROSIVITY: NO INFORMATION AVAILABLE.
SENSITIZATION: NO INFORMATION AVAILABLE.
GERM CELL MUTAGENICITY: NO INFORMATION AVAILABLE.
REPRODUCTIVE TOXICITY: NO INFORMATION AVAILABLE.
DEVELOPMENTAL TOXICITY: NO INFORMATION AVAILABLE.
TERATOGENICITY: NO INFORMATION AVAILABLE.
STOT - SINGLE EXPOSURE: NO INFORMATION AVAILABLE.
STOT - REPEATED EXPOSURE: NO INFORMATION AVAILABLE.
CHRONIC TOXICITY: NO INFORMATION AVAILABLE.
TARGET ORGAN EFFECTS: NO INFORMATION AVAILABLE.
ASPIRATION HAZARD: NO INFORMATION AVAILABLE.
CARCINOGENICITY:
THIS PRODUCT DOES NOT CONTAIN ANY CARCINOGENS OR POTENTIAL CARCINOGENS
AS LISTED BY OSHA, IARC OR NTP.
| SECTION 12: ECOLOGICAL INFORMATION | |
12.1. TOXICITY:
ECOTOXICITY: NO INFORMATION AVAILABLE
12.2. PERSISTENCE AND DEGRADABILITY: NO INFORMATION AVAILABLE.
12.3. BIOACCUMULATIVE POTENTIAL: NO INFORMATION AVAILABLE.
12.4. MOBILITY IN SOIL: NO INFORMATION AVAILABLE.
12.5. RESULTS OF PBT AND VPVB ASSESSMENT: NO INFORMATION AVAILABLE.
12.6. OTHER ADVERSE EFFECTS: NO INFORMATION AVAILABLE
| SECTION 13: DISPOSAL CONSIDERATIONS | |
13.1. WASTE TREATMENT METHODS:
DISPOSAL OF WASTES:
IT IS THE RESPONSIBILITY OF THE WASTE GENERATOR TO DETERMINE THE TOXICITY
AND PHYSICAL PROPERTIES OF THE MATERIAL GENERATED TO DETERMINE THE PROPER
WASTE IDENTIFICATION AND DISPOSAL METHODS IN COMPLIANCE WITH APPLICABLE
REGULATIONS
CONTAMINATED PACKAGING
DISPOSE OF IN ACCORDANCE WITH FEDERAL, STATE AND LOCAL REGULATIONS
| SECTION 14: TRANSPORT INFORMATION | |
DOT: NOT REGULATED
IATA: NOT REGULATED
IMDG: NOT REGULATED
| SECTION 15: REGULATORY INFORMATION | |
GLOBAL INVENTORIES:
TSCA: LISTED
DSL: LISTED
LEGEND:
TSCA: UNITED STATES TOXIC SUBSTANCES CONTROL ACT SECTION 8(B) INVENTORY
DSL: CANADIAN DOMESTIC SUBSTANCES LIST
LISTED:
THE COMPONENTS OF THIS PRODUCT ARE EITHER LISTED OR EXEMPT FROM LISTING ON
INVENTORY.
NOT LISTED:
ONE OR MORE COMPONENTS OF THIS PRODUCT ARE NOT LISTED ON INVENTORY.
CANADA:
THIS PRODUCT HAS BEEN CLASSIFIED IN ACCORDANCE WITH THE HAZARD CRITERIA
OF THE CONTROLLED PRODUCTS REGULATIONS (CPR) AND THE SDS CONTAINS ALL THE
INFORMATION REQUIRED BY THE CPR
WHMIS HAZARD CLASS: NON-CONTROLLED
UNITED STATES OF AMERICA:
SARA 313:
SECTION 313 OF TITLE III OF THE SUPERFUND AMENDMENTS AND REAUTHORIZATION
ACT OF 1986 (SARA). THIS PRODUCT DOES NOT CONTAIN ANY CHEMICALS WHICH ARE
SUBJECT TO THE REPORTING REQUIREMENTS OF THE ACT AND TITLE 40 OF THE CODE
OF FEDERAL REGULATIONS, PART 372
CALIFORNIA PROPOSITION 65:
THIS PRODUCT DOES NOT CONTAIN ONE OR MORE SUBSTANCES LISTED ON PROPOSITION
65 AT OR ABOVE 0.01 WT. %.
EUROPE:
RESTRICTIONS OF USE OF HAZARDOUS SUBSTANCES (ROHS) DIRECTIVE 2011/65/EU:
THIS PRODUCT DOES NOT CONTAIN LEAD (7439-92-1), CADMIUM (7440-43-9),
MERCURY (7439-97-6), HEXAVALENT CHROMIUM (7440-47-3), POLYBROMINATED
BIPHENYLS (PBB), AND POLYBROMINATED DIPHENYL ETHERS (PBDE) ABOVE THE
REGULATED LIMIT MENTIONED IN THIS REGULATION.
EU-REACH (1907/2006) - ANNEX XVII - CANDIDATE LIST OF SUBSTANCES OF VERY
HIGH CONCERN (SVHC) FOR AUTHORIZATION:
THIS PRODUCT DOES NOT CONTAIN A SUBSTANCE(S) ON THE SVHC AS PROPOSED BY
ECHA ABOVE A CONCENTRATION OF 0.1 WT. %
| SECTION 16: OTHER INFORMATION | |
HMIS:
HEALTH HAZARDS 1
FLAMMABILITY 1
PHYSICAL HAZARDS 0
PERSONAL PROTECTION X
KEY OR LEGEND TO ABBREVIATIONS AND ACRONYMS USED IN THE SAFETY DATA SHEET:
NO INFORMATION AVAILABLE
KEY LITERATURE REFERENCES AND SOURCES FOR DATA: NO INFORMATION AVAILABLE
PREPARED BY: PRODUCT SAFETY & REGULATORY AFFAIRS
REVISION DATE: 14-AUG-2015
REVISION NOTE: NOT APPLICABLE.
TRAINING ADVICE: NO INFORMATION AVAILABLE
FURTHER INFORMATION: NO INFORMATION AVAILABLE
DISCLAIMER:
THE INFORMATION PROVIDED IN THIS SAFETY DATA SHEET IS CORRECT TO THE BEST
OF OUR KNOWLEDGE, INFORMATION AND BELIEF AT THE DATE OF ITS PUBLICATION.
THE INFORMATION GIVEN IS DESIGNED ONLY AS GUIDANCE FOR SAFE HANDLING, USE,
PROCESSING, STORAGE, TRANSPORTATION, DISPOSAL AND RELEASE AND IS NOT TO BE
CONSIDERED A WARRANTY OR QUALITY SPECIFICATION. THE INFORMATION RELATES
ONLY TO THE SPECIFIC MATERIAL DESIGNATED AND MAY NOT BE VALID FOR SUCH
MATERIAL USED IN COMBINATION WITH ANY OTHER MATERIALS OR IN ANY PROCESS,
UNLESS SPECIFIED IN THE TEXT.