| Common Name: | SUREWELD 7014 - 3/32 X 14IN SUREWELD 7014 ELECTRODE 5LB |
| Manufacturer: | ESAB |
| SDS Revision Date: | 6/22/2016 |
| SDS Format: | GHS-US |
| Item Number(s): | 400G43 |
| Manufacturer Model Number(s): |
SDS Table of Contents
Click the desired link below to jump directly to that section in the SDS.
ESAB(R*)
SAFETY DATA SHEET
THIS SAFETY DATA SHEET COMPLIES WITH REGULATION (EC) NO. 830/2015,
ISO 11014-1 AND ANSI Z400.1
SUREWELD 7014 - 3/32 X 14IN SUREWELD 7014 ELECTRODE 5LB
ISSUED: 2016-06-22
| SECTION 1: IDENTIFICATION OF THE SUBSTANCE/MIXTURE |  |
AND OF THE COMPANY/UNDERTAKING
1.1. PRODUCT IDENTIFIER:
TRADE NAME: SUREWELD 7014 - 3/32 X 14IN SUREWELD 7014 ELECTRODE 5LB
1.2. RELEVANT IDENTIFIED USES OF THE SUBSTANCE OR MIXTURE AND USES ADVISED
AGAINST:
USE: ARC WELDING
1.3. DETAILS OF THE SUPPLIER OF THE SAFETY DATA SHEET:
SDS CREATED BY: TDST
SUPPLIER: ESAB DENTON
STREET ADDRESS:
2800 AIRPORT ROAD
DENTON, TX 76207
TELEPHONE: 1-800-372-2123
EMAIL: SDS.ESAB@ESAB.SE
WEB SITE: WWW.ESAB.COM
1.4. EMERGENCY TELEPHONE NUMBER:
EMERGENCY PHONE NUMBER: 1-800-372-2123
AVAILABLE OUTSIDE OFFICE HOURS: NO
| SECTION 2: HAZARDS IDENTIFICATION | |
2.1. CLASSIFICATION OF THE SUBSTANCE OR MIXTURE:
THE PRODUCT IS NOT CLASSIFIED
2.2. LABEL ELEMENTS: THE PRODUCT DOES NOT REQUIRE LABELLING
2.3. OTHER HAZARDS:
THIS PRODUCT CONTAINS TITANIUM DIOXIDE WHICH IS POSSIBLY CARCINOGENIC.
THIS PRODUCT CONTAINS QUARTZ, BUT NORMALLY NOT IN AN INHALABLE FRACTION.
QUARTZ CAN CAUSE SILICOSIS AND MAY CAUSE CANCER. AVOID EYE CONTACT OR
INHALATION OF DUST FROM THE PRODUCT. SKIN CONTACT IS NORMALLY NO HAZARD
BUT SHOULD BE AVOIDED TO PREVENT POSSIBLE ALLERGIC REACTIONS. PERSONS WITH
A PACEMAKER SHOULD NOT GO NEAR BRAZING OPERATIONS UNTIL THEY HAVE CONSULTED
THEIR DOCTOR AND OBTAINED INFORMATION FROM THE MANUFACTURER OF THE DEVICE.
WHEN THIS PRODUCT IS USED IN A WELDING PROCESS, THE MOST IMPORTANT HAZARDS
ARE WELDING FUMES, HEAT, RADIATION AND ELECTRIC SHOCK.
HEAT: SPATTER AND MELTING METAL CAN CAUSE BURN INJURIES AND START FIRES.
RADIATION: ARC RAYS CAN SEVERELY DAMAGE EYES OR SKIN.
ELECTRICITY: ELECTRIC SHOCK CAN KILL.
FUMES:
OVEREXPOSURE TO WELDING FUMES MAY RESULT IN SYMPTOMS LIKE METAL FUME
FEVER, DIZZINESS, NAUSEA, DRYNESS OR IRRITATION OF THE NOSE, THROAT OR
EYES. CHRONIC OVEREXPOSURE TO WELDING FUMES MAY AFFECT PULMONARY FUNCTION.
OVEREXPOSURE TO MANGANESE AND MANGANESE COMPOUNDS ABOVE SAFE EXPOSURE
LIMITS CAN CAUSE IRREVERSIBLE DAMAGE TO THE CENTRAL NERVOUS SYSTEM,
INCLUDING THE BRAIN, SYMPTOMS OF WHICH MAY INCLUDE SLURRED SPEECH,
LETHARGY, TREMOR, MUSCULAR WEAKNESS, PSYCHOLOGICAL DISTURBANCES AND
SPASTIC GAIT.
OTHER:
EMERGENCY OVERVIEW:
COATED METAL RODS IN VARYING COLOURS. THIS PRODUCT IS NORMALLY NOT
CONSIDERED HAZARDOUS AS SHIPPED. GLOVES SHOULD BE WORN WHEN HANDLING
TO PREVENT CONTAMINATING HANDS WITH PRODUCT DUST.
| SECTION 3: COMPOSITION/INFORMATION ON INGREDIENTS | |
3.2. MIXTURES:
CHEMICAL NAME CAS NO. CONCENTRATION CLASSIFICATION R-PHRASE
EC NO. H-PHRASE
REACH NO.
IRON 7439-89-6 >60%
231-096-4
01-2119462838 - 24
TITANIUM 13463-67-7 7 - 13%
OXIDE 236-675-5
CELLULOSE 9004-34-6 1 - 5%
232-674-9
MANGANESE 7439-96-5 1 - 5%
231-105-1
01-2119449803 - 34
MICA 12001-26-2 1 - 5%
215-479-3
SILICATE 1312-76-1 1 - 5%
BINDER 215-199-1
(POTASSIUM
SILICATE)
ALUMINIUM 91728-14-2 0,1 - 1%
CALCIUM 7440-70-2 0,1 - 1%
FELDSPAR 68476-25-5 0,1 - 1%
270-666-7
QUARTZ 14808-60-7 0,1 - 1%
238-878-4
SILICATE 1344-09-8 0,1 - 1%
BINDER 215-687-4
(SODIUM
SILICATE)
SILICON 7440-21-3 0,1 - 1%
231-130-8
PRODUCT BASED ON:
THIS PRODUCT IS A PREPARATION OF CORE WIRE WITH EXTRUDED COATING.
| SECTION 4: FIRST AID MEASURES | |
4.1. DESCRIPTION OF FIRST AID MEASURES:
ELECTRIC SHOCK:
DISCONNECT AND TURN OFF THE POWER. USE A NONCONDUCTIVE MATERIAL TO PULL
VICTIM AWAY FROM CONTACT WITH LIVE PARTS OR WIRES. IF NOT BREATHING, BEGIN
ARTIFICIAL RESPIRATION, PREFERABLY MOUTH-TO-MOUTH. IF NO DETECTABLE PULSE,
BEGIN CPR
INHALATION:
IF BREATHING HAS STOPPED, PERFORM ARTIFICIAL RESPIRATION AND OBTAIN MEDICAL
ASSISTANCE IMMEDIATELY!
IF BREATHING IS DIFFICULT, PROVIDE FRESH AIR AND CALL PHYSICIAN.
SKIN CONTACT:
FOR SKIN BURNS FROM ARC RADIATION, PROMPTLY FLUSH WITH COLD WATER. GET
MEDICAL ATTENTION FOR BURNS OR IRRITATIONS THAT PERSIST. TO REMOVE DUST
OR PARTICLES WASH WITH MILD SOAP AND WATER.
EYE CONTACT:
FOR RADIATION BURNS DUE TO ARC FLASH, SEE PHYSICIAN. TO REMOVE DUSTS OR
FUMES FLUSH WITH WATER FOR AT LEAST FIFTEEN MINUTES. IF IRRITATION
PERSISTS, OBTAIN MEDICAL ASSISTANCE.
4.2. MOST IMPORTANT SYMPTOMS AND EFFECTS, BOTH ACUTE AND DELAYED:
NOT APPLICABLE
4.3. INDICATION OF ANY IMMEDIATE MEDICAL ATTENTION AND SPECIAL TREATMENT
NEEDED: NOT APPLICABLE
OTHER:
GENERAL: MOVE TO FRESH AIR AND CALL FOR MEDICAL AID.
| SECTION 5: FIREFIGHTING MEASURES | |
5.1. EXTINGUISHING MEDIA:
SUITABLE EXTINGUISHING MEDIA:
NO SPECIFIC RECOMMENDATIONS FOR WELDING CONSUMABLES. WELDING ARCS AND
SPARKS CAN IGNITE COMBUSTIBLE AND FLAMMABLE MATERIALS. USE THE
EXTINGUISHING MEDIA RECOMMENDED FOR THE BURNING MATERIALS AND FIRE
SITUATION. NO SPECIFIC RECOMMENDATIONS FOR WELDING CONSUMABLES. WELDING
ARCS AND SPARKS CAN IGNITE COMBUSTIBLE AND FLAMMABLE MATERIALS. USE THE
EXTINGUISHING MEDIA RECOMMENDED FOR THE BURNING MATERIALS AND FIRE
SITUATION.
5.2. SPECIAL HAZARDS ARISING FROM THE SUBSTANCE OR MIXTURE: NOT APPLICABLE
5.3. ADVICE FOR FIREFIGHTERS:
SPECIAL PROTECTIVE EQUIPMENT FOR FIRE-FIGHTERS:
WEAR SELF-CONTAINED BREATHING APPARATUS AS FUMES OR VAPORS MAY BE HARMFUL.
| SECTION 6: ACCIDENTAL RELEASE MEASURES | |
6.1. PERSONAL PRECAUTIONS, PROTECTIVE EQUIPMENT AND EMERGENCY PROCEDURES:
REFER TO SECTION 8.
6.2. ENVIRONMENTAL PRECAUTIONS: REFER TO SECTION 13.
6.3. METHODS AND MATERIAL FOR CONTAINMENT AND CLEANING UP:
SOLID OBJECTS MAY BE PICKED UP AND PLACED INTO A CONTAINER. LIQUIDS OR
PASTES SHOULD BE SCOOPED UP AND PLACED INTO A CONTAINER. WEAR PROPER
PROTECTIVE EQUIPMENT WHILE HANDLING THESE MATERIALS. DO NOT DISCARD AS
REFUSE.
6.4. REFERENCE TO OTHER SECTIONS: REFER TO SECTION 8/13
| SECTION 7: HANDLING AND STORAGE | |
7.1. PRECAUTIONS FOR SAFE HANDLING:
PREVENTIVE HANDLING PRECAUTIONS:
HANDLE WITH CARE TO AVOID STINGS AND CUTS. WEAR GLOVES WHEN HANDLING
WELDING CONSUMABLES. AVOID EXPOSURE TO DUST. DO NOT INGEST. SOME
INDIVIDUALS CAN DEVELOP AN ALLERGIC REACTION TO CERTAIN MATERIALS. RETAIN
ALL WARNING AND IDENTITY LABELS.
7.2. CONDITIONS FOR SAFE STORAGE, INCLUDING ANY INCOMPATIBILITIES:
KEEP SEPARATE FROM CHEMICAL SUBSTANCES LIKE ACIDS AND STRONG BASES, WHICH
COULD CAUSE CHEMICAL REACTIONS.
7.3. SPECIFIC END USE(S): NOT APPLICABLE
| SECTION 8: EXPOSURE CONTROLS/PERSONAL PROTECTION | |
8.1. CONTROL PARAMETERS:
EXPOSURE LIMITS:
USE INDUSTRIAL HYGIENE MONITORING EQUIPMENT TO ENSURE THAT EXPOSURE DOES
NOT EXCEED APPLICABLE NATIONAL EXPOSURE LIMITS. THE FOLLOWING LIMITS CAN
BE USED AS GUIDANCE FOR INFORMATION ABOUT WELDING FUME ANALYSIS REFER TO
SECTION 10.
NATIONAL OCCUPATIONAL EXPOSURE LIMITS:
INGREDIENT CAS NO. EC NO. EXPOSURE SHORT-TERM
LIMIT EXPOSURE LIMIT
MG/M3-PPM MG/M3-PPM
SILICATE BINDER 1312-76-1 215-199-1
(POTASSIUM SILICATE)
TITANIUM OXIDE 13463-67-7 236-675-5 15
IRON 7439-89-6 231-096-4
MANGANESE 7439-96-5 231-105-1 5
SILICON 7440-21-3 231-130-8 15
SILICON 7440-21-3 231-130-8 5
SILICATE BINDER 1344-09-8 215-687-4
(SODIUM SILICATE)
CELLULOSE 9004-34-6 232-674-9 15
CELLULOSE 9004-34-6 232-674-9 5
QUARTZ 14808-60-7 238-878-4
FELDSPAR 68476-25-5 270-666-7
MICA 12001-26-2 215-479-3
ALUMINIUM 91728-14-2
CALCIUM 7440-70-2
INGREDIENT REMARK SOURCE YEAR
SILICATE BINDER OSHA 2016
(POTASSIUM SILICATE)
TITANIUM OXIDE TOTAL DUST OSHA 2016
IRON OSHA 2016
MANGANESE AS Mn OSHA 2016
(METAL AND FUME)
SILICON TOTAL DUST OSHA 2016
SILICON RESPIRABLE FRACTION OSHA 2016
SILICATE BINDER OSHA 2016
(SODIUM SILICATE)
CELLULOSE TOTAL DUST OSHA 2016
CELLULOSE RESPIRABLE FRACTION OSHA 2016
QUARTZ 30 MG/M3/%SiO2+ 2, OSHA 2016
TOTAL DUST,
10 MG/M3/%SiO2+2,
RESPIR. DUST
(QUARTZ, TRIPOLI),
VALUE CALCULATED
FROM RESPIR. DUST
FORMULA FOR QUARTZ
(CRISTOBALITE,
TRIDYMITE)
FELDSPAR OSHA 2016
MICA 20 MPPCF, <1% OSHA 2016
CRYSTALLINE SILICA
ALUMINIUM OSHA 2016
CALCIUM OSHA 2016
8.2. EXPOSURE CONTROLS: NOT APPLICABLE
OTHER:
AVOID EXPOSURE TO WELDING FUMES, RADIATION, SPATTER, ELECTRIC SHOCK, HEATED
MATERIALS AND DUST. TRAIN WELDERS TO AVOID CONTACT WITH LIVE ELECTRICAL
PARTS AND INSULATE CONDUCTIVE PARTS.
VENTILATION:
ENSURE SUFFICIENT VENTILATION, LOCAL EXHAUST, OR BOTH. KEEP WORKING PLACE
AND PROTECTIVE CLOTHING CLEAN AND DRY. CHECK CONDITION OF PROTECTIVE
CLOTHING AND EQUIPMENT ON A REGULAR BASIS.
PERSONAL PROTECTIVE EQUIPMENT:
USE RESPIRATOR OR AIR SUPPLIED RESPIRATOR WHEN WELDING OR BRAZING IN A
CONFINED SPACE, OR WHERE LOCAL EXHAUST OR VENTILATION IS NOT SUFFICIENT
TO KEEP EXPOSURE VALUES WITHIN SAFE LIMITS. USE SPECIAL CARE WHEN WELDING
PAINTED OR COATED STEELS SINCE HAZARDOUS SUBSTANCES FROM THE COATING MAY
BE EMITTED. WEAR HAND, HEAD, EYES, EAR AND BODY PROTECTION LIKE WELDERS
GLOVES, HELMET OR FACE SHIELD WITH FILTER LENS, SAFETY BOOTS, APRON, ARM
AND SHOULDER PROTECTION. KEEP PROTECTIVE CLOTHING CLEAN AND DRY.
| SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES | |
9.1. INFORMATION ON BASIC PHYSICAL AND CHEMICAL PROPERTIES:
APPEARANCE: SOLID, NON-VOLATILE WITH VARYING COLOR.
APPEARANCE, COLOUR: NOT APPLICABLE
APPEARANCE, PHYSICAL STATE: NOT APPLICABLE
AUTO-IGNITION TEMPERATURE: NOT APPLICABLE
DECOMPOSITION TEMPERATURE: NOT APPLICABLE
EVAPORATION RATE: NOT APPLICABLE
EXPLOSIVE PROPERTIES: NOT APPLICABLE
FLAMMABILITY (SOLID, GAS): NOT APPLICABLE
FLASH POINT: NOT APPLICABLE
INITIAL BOILING POINT AND BOILING RANGE: NOT APPLICABLE
MELTING POINT: >1300 DEG. C/>2300 DEG. F
MELTING POINT / FREEZING POINT: NOT APPLICABLE
ODOUR: NOT APPLICABLE
ODOUR THRESHOLD: NOT APPLICABLE
OXIDISING PROPERTIES: NOT APPLICABLE
PARTITION COEFFICIENT N-OCTANOL / WATER: NOT APPLICABLE
PH VALUE: NOT APPLICABLE
RELATIVE DENSITY: NOT APPLICABLE
SOLUBILITY: NOT APPLICABLE
UPPER / LOWER FLAMMABILITY OR EXPLOSIVE LIMITS: NOT APPLICABLE
VAPOUR DENSITY: NOT APPLICABLE
VAPOUR PRESSURE: NOT APPLICABLE
VISCOSITY: NOT APPLICABLE
9.2. OTHER INFORMATION: NOT APPLICABLE
| SECTION 10: STABILITY AND REACTIVITY | |
10.1. REACTIVITY:
REACTIVITY:
CONTACT WITH CHEMICAL SUBSTANCES LIKE ACIDS OR STRONG BASES COULD CAUSE
GENERATION OF GAS.
10.2. CHEMICAL STABILITY:
CHEMICAL STABILITY: THIS PRODUCT IS STABLE UNDER NORMAL CONDITIONS.
10.3. POSSIBILITY OF HAZARDOUS REACTIONS: NOT APPLICABLE
10.4. CONDITIONS TO AVOID:
CONDITIONS TO AVOID:
THIS PRODUCT IS ONLY INTENDED FOR NORMAL WELDING PURPOSES.
10.5. INCOMPATIBLE MATERIALS: NOT APPLICABLE
10.6. HAZARDOUS DECOMPOSITION PRODUCTS:
HAZARDOUS DECOMPOSITION PRODUCTS:
WHEN THIS PRODUCT IS USED IN A WELDING PROCESS, HAZARDOUS DECOMPOSITION
PRODUCTS WOULD INCLUDE THOSE FROM THE VOLATILIZATION, REACTION OR OXIDATION
OF THE MATERIALS LISTED IN SECTION 3 AND THOSE FROM THE BASE METAL AND
COATING. THE AMOUNT OF FUMES GENERATED FROM MANUAL METAL ARC WELDING VARIES
WITH WELDING PARAMETERS AND DIMENSIONS, BUT IS GENERALLY NO MORE THAN 5 TO
15 G/KG CONSUMABLE. FUMES FROM THIS PRODUCT MAY CONTAIN COMPOUNDS OF THE
FOLLOWING CHEMICAL ELEMENTS:
Fe, O, Mn, Zr, F, Na, Si, K, Al, Mg AND Ti. THE REST IS NOT ANALYZED,
ACCORDING TO AVAILABLE STANDARDS.
OTHER:
REFER TO APPLICABLE NATIONAL EXPOSURE LIMITS FOR FUME COMPOUNDS, INCLUDING
THOSE EXPOSURE LIMITS FOR FUME COMPOUNDS FOUND IN SECTION 8. MANGANESE HAS
A LOW EXPOSURE LIMIT, IN SOME COUNTRIES THAT MAY BE EASILY EXCEEDED.
REASONABLY EXPECTED GASEOUS PRODUCTS WOULD INCLUDE CARBON OXIDES, NITROGEN
OXIDES AND OZONE. AIR CONTAMINANTS AROUND THE WELDING AREA CAN BE AFFECTED
BY THE WELDING PROCESS AND INFLUENCE THE COMPOSITION AND QUANTITY OF FUMES
AND GASES PRODUCED.
| SECTION 11: TOXICOLOGICAL INFORMATION | |
11.1. INFORMATION ON TOXICOLOGICAL EFFECTS:
INFORMATION ON TOXICOLOGICAL EFFECTS:
INHALATION OF WELDING FUMES AND GASES CAN BE DANGEROUS TO YOUR HEALTH.
CLASSIFICATION OF WELDING FUMES IS DIFFICULT BECAUSE OF VARYING BASE
MATERIALS, COATINGS, AIR CONTAMINATION AND PROCESSES. THE INTERNATIONAL
AGENCY FOR RESEARCH ON CANCER HAS CLASSIFIED WELDING FUMES AS POSSIBLY
CARCINOGENIC TO HUMANS (GROUP 2B).
ACUTE TOXICITY:
OVEREXPOSURE TO WELDING FUMES MAY RESULT IN SYMPTOMS LIKE METAL FUME FEVER,
DIZZINESS, NAUSEA, DRYNESS OR IRRITATION OF THE NOSE, THROAT OR EYES.
SKIN CORROSION/IRRITATION: NOT APPLICABLE
SERIOUS EYE DAMAGE/IRRITATION: NOT APPLICABLE
RESPIRATORY/SKIN SENSITIZATION: NOT APPLICABLE
GERM CELL MUTAGENICITY: NOT APPLICABLE
GENOTOXICITY: NOT APPLICABLE
CARCINOGENICITY: NOT APPLICABLE
REPRODUCTIVE TOXICITY: NOT APPLICABLE
STOT-SINGLE EXPOSURE: NOT APPLICABLE
STOT-REPEATED EXPOSURE: NOT APPLICABLE
ASPIRATION HAZARD: NOT APPLICABLE
OTHER:
LONG TERM EFFECT:
OVEREXPOSURE TO WELDING FUMES MAY AFFECT PULMONARY FUNCTION. OVEREXPOSURE
TO MANGANESE AND MANGANESE COMPOUNDS ABOVE SAFE EXPOSURE LIMITS CAN CAUSE
IRREVERSIBLE DAMAGE TO THE CENTRAL NERVOUS SYSTEM, INCLUDING THE BRAIN,
SYMPTOMS OF WHICH MAY INCLUDE SLURRED SPEECH, LETHARGY, TREMOR, MUSCULAR
WEAKNESS, PSYCHOLOGICAL DISTURBANCES AND SPASTIC GAIT. PROLONGED INHALATION
OF TITANIUM DIOXIDE ABOVE SAFE EXPOSURE LIMITS CAN CAUSE CANCER. INHALABLE
QUARTZ IS A RESPIRATORY CARCINOGEN; HOWEVER, THE PROCESS OF WELDING
CONVERTS CRYSTALLINE QUARTZ TO THE AMORPHOUS FORM WHICH IS NOT CONSIDERED
TO BE A CARCINOGEN.
| SECTION 12: ECOLOGICAL INFORMATION | |
12.1. TOXICITY: NOT APPLICABLE
12.2. PERSISTENCE AND DEGRADABILITY: NOT APPLICABLE
12.3. BIOACCUMULATIVE POTENTIAL: NOT APPLICABLE
12.4. MOBILITY IN SOIL: NOT APPLICABLE
12.5. RESULTS OF PBT AND VPVB ASSESSMENT: NOT APPLICABLE
12.6. OTHER ADVERSE EFFECTS: NOT APPLICABLE
OTHER:
WELDING CONSUMABLES AND MATERIALS COULD DEGRADE/WEATHER INTO COMPONENTS
ORIGINATING FROM THE CONSUMABLES OR FROM THE MATERIALS USED IN THE WELDING
PROCESS. AVOID EXPOSURE TO CONDITIONS THAT COULD LEAD TO ACCUMULATION IN
SOILS OR GROUNDWATER
| SECTION 13: DISPOSAL CONSIDERATIONS | |
13.1. WASTE TREATMENT METHODS:
DISPOSAL CONSIDERATIONS:
DISCARD ANY PRODUCT, RESIDUE, DISPOSABLE CONTAINER OR LINER IN AN
ENVIRONMENTALLY ACCEPTABLE MANNER, IN FULL COMPLIANCE WITH FEDERAL AND
LOCAL REGULATIONS. USE RECYCLING PROCEDURES IF AVAILABLE.
USA RCRA:
THIS PRODUCT IS NOT CONSIDERED HAZARDOUS WASTE IF DISCARDED. RESIDUES FROM
WELDING CONSUMABLES AND PROCESSES COULD DEGRADE AND ACCUMULATE IN SOILS
AND GROUNDWATER. WELDING SLAG FROM THIS PRODUCT TYPICALLY CONTAINS MAINLY
THE FOLLOWING COMPONENTS ORIGINATING FROM THE COATING OF THE ELECTRODE:
Fe, O, Mn, Zr, F, Na, Si, K, Ca, Al, Mg AND Ti.
| SECTION 14: TRANSPORT INFORMATION | |
14.1. UN NUMBER: NOT APPLICABLE
14.2. UN PROPER SHIPPING NAME: NOT APPLICABLE
14.3. TRANSPORT HAZARD CLASS(ES): NOT APPLICABLE
14.4. PACKING GROUP: NOT APPLICABLE
14.5. ENVIRONMENTAL HAZARDS: NOT APPLICABLE
14.6. SPECIAL PRECAUTIONS FOR USER: NOT APPLICABLE
14.7. TRANSPORT IN BULK ACCORDING TO ANNEX II OF MARPOL AND THE IBC CODE:
NOT APPLICABLE
OTHER: NO INTERNATIONAL REGULATIONS OR RESTRICTIONS ARE APPLICABLE.
| SECTION 15: REGULATORY INFORMATION | |
15.1 SAFETY, HEALTH AND ENVIRONMENTAL REGULATIONS/LEGISLATION SPECIFIC
FOR THE SUBSTANCE OR MIXTURE:
OTHER REGULATIONS, LIMITATIONS AND LEGAL REGULATIONS:
CANADA:
WHMIS CLASSIFICATION:
CLASS D; DIVISION 2, SUBDIVISION A - CANADIAN ENVIRONMENTAL
PROTECTION ACT (CEPA):
ALL CONSTITUENTS OF THESE PRODUCTS ARE ON THE DOMESTIC SUBSTANCE LIST
(DSL).
USA:
UNDER OSHA HAZARD COMMUNICATION STANDARD, THESE PRODUCTS ARE CONSIDERED
HAZARDOUS.
THIS PRODUCT CONTAINS OR PRODUCES A CHEMICAL KNOWN TO THE STATE OF
CALIFORNIA TO CAUSE CANCER AND BIRTH DEFECTS (OR OTHER REPRODUCTIVE HARM).
(CALIFORNIA HEALTH & SAFETY CODE SUBSECTION 25249.5 ET SEQ.)
UNITED STATES EPA TOXIC SUBSTANCE CONTROL ACT:
ALL CONSTITUENTS OF THIS PRODUCT ARE ON THE TSCA INVENTORY LIST OR ARE
EXCLUDED FROM LISTING.
CERCLA/SARA TITLE III REPORTABLE QUANTITIES (RQS) AND/OR THRESHOLD PLANNING
QUANTITIES (TPQS): NO INGREDIENTS LISTED IN THIS SECTION
SPILLS OR RELEASES RESULTING IN THE LOSS OF ANY INGREDIENT AT OR ABOVE ITS
RQ REQUIRE IMMEDIATE NOTIFICATION TO THE NATIONAL RESPONSE CENTER AND TO
YOUR LOCAL EMERGENCY PLANNING COMMITTEE.
AS SHIPPED: IMMEDIATE
IN USE: IMMEDIATE DELAYED
EPCRA/SARA TITLE III 313 TOXIC CHEMICALS:
THE FOLLOWING METALLIC COMPONENTS ARE LISTED AS SARA 313 "TOXIC CHEMICALS"
AND POTENTIAL SUBJECT TO ANNUAL SARA 313 REPORTING. SEE SECTION 3 FOR
WEIGHT PERCENT.
INGREDIENT NAME/DISCLOSURE THRESHOLD
MANGANESE/1.0% DE MINIMIS CONCENTRATION
15.2. CHEMICAL SAFETY ASSESSMENT: NOT APPLICABLE
OTHER:
READ AND UNDERSTAND THE MANUFACTURER'S INSTRUCTIONS, YOUR EMPLOYER'S SAFETY
PRACTICES AND THE HEALTH AND SAFETY INSTRUCTIONS ON THE LABEL. OBSERVE ANY
FEDERAL AND LOCAL REGULATIONS. TAKE PRECAUTIONS WHEN WELDING AND PROTECT
YOURSELF AND OTHERS.
WARNING:
WELDING FUMES AND GASES ARE HAZARDOUS TO YOUR HEALTH AND MAY DAMAGE LUNGS
AND OTHER ORGANS. USE ADEQUATE VENTILATION. ELECTRIC SHOCK CAN KILL. ARC
RAYS AND SPARKS CAN INJURE EYES AND BURN SKIN.
WEAR CORRECT HAND, HEAD, EYE AND BODY PROTECTION
| SECTION 16: OTHER INFORMATION | |
CHANGES TO PREVIOUS REVISION:
THIS SAFETY DATA SHEET HAS BEEN REVISED DUE TO MODIFICATIONS TO SECTIONS 3
AND 8.THIS SDS SUPERSEDES 7989-M.
REFERENCES TO KEY LITERATURE AND DATA SOURCES:
REFER TO ESAB "WELDING AND CUTTING - RISKS AND MEASURES", F52-529
"PRECAUTIONS AND SAFE PRACTICES FOR ELECTRIC WELDING AND CUTTING" AND
F2035 "PRECAUTIONS AND SAFE PRACTICES FOR GAS WELDING, CUTTING AND HEATING"
AVAILABLE FROM ESAB, AND TO: WWW.ESAB.COM
OTHER:
ADDITIONAL INFORMATION:
USA:
CONTACT ESAB AT WWW.ESABNA.COM OR 1-800 ESAB-123 IF YOU HAVE ANY QUESTIONS
ABOUT THIS SDS. AMERICAN NATIONAL STANDARD Z49.1 "SAFETY IN WELDING AND
CUTTING", ANSI/AWS F1.5 "METHODS FOR SAMPLING AND ANALYZING GASES FROM
WELDING AND ALLIED PROCESSES", ANSI/AWS F1.1 "METHOD FOR SAMPLING AIRBORNE
PARTICLES GENERATED BY WELDING AND ALLIED PROCESSES", AWSF3.2M/F3.2
"VENTILATION GUIDE FOR WELD FUME", AMERICAN WELDING SOCIETY, 550 NORTH LE
JEUNE ROAD, MIAMI FLORIDA 33135. SAFETY AND HEALTH FACT SHEETS AVAILABLE
FROM AWS AT WWW.AWS.ORG.
OSHA PUBLICATION 2206 (29 C.F.R. 1910), U.S. GOVERNMENT PRINTING OFFICE,
SUPERINTENDENT OF DOCUMENTS, P.O. BOX 371954, PITTSBURGH, PA 15250-7954
AMERICAN CONFERENCE OF GOVERNMENTAL HYGIENISTS (ACGIH), THRESHOLD LIMIT
VALUES AND BIOLOGICAL EXPOSURE INDICES, 6500 GLENWAY AVE., CINCINNATI,
OHIO 45211, USA.
NFPA 51B "STANDARD FOR FIRE PREVENTION DURING WELDING, CUTTING, AND OTHER
HOT WORK" PUBLISHED BY THE NATIONAL FIRE PROTECTION ASSOCIATION, 1
BATTERYMARCH PARK, QUINCY, MA 02169.
UK:
WMA PUBLICATION 236 AND 237, "HAZARDS FROM WELDING FUME", "THE ARC WELDER
AT WORK, SOME GENERAL ASPECTS OF HEALTH AND SAFETY".
GERMANY:
UNFALLVERHUTUNGSVORSCHRIFT BGV D1, "SCHWEIBEN, SCHNEIDEN UND VERWANDTE
VERFAHREN".
CANADA:
CSA STANDARD CAN/CSA-W117.2-01 "SAFETY IN WELDING, CUTTING, AND ALLIED
PROCESSES".
THIS PRODUCT HAS BEEN CLASSIFIED ACCORDING TO THE HAZARD CRITERIA OF THE
CPR AND THE SDS CONTAINS ALL OF THE INFORMATION REQUIRED BY THE CPR.
ESAB REQUESTS THE USERS OF THIS PRODUCT TO STUDY THIS SAFETY DATA SHEET
(SDS) AND BECOME AWARE OF PRODUCT HAZARDS AND SAFETY INFORMATION. TO
PROMOTE SAFE USE OF THIS PRODUCT A USER SHOULD:
NOTIFY ITS EMPLOYEES, AGENTS AND CONTRACTORS OF THE INFORMATION ON THIS
SDS AND ANY PRODUCT HAZARDS/SAFETY INFORMATION. FURNISH THIS SAME
INFORMATION TO EACH OF ITS CUSTOMERS FOR THE PRODUCT.
REQUEST SUCH CUSTOMERS TO NOTIFY EMPLOYEES AND CUSTOMERS FOR THE SAME
PRODUCT HAZARDS AND SAFETY INFORMATION.
THE INFORMATION HEREIN IS GIVEN IN GOOD FAITH AND BASED ON TECHNICAL DATA
THAT ESAB BELIEVES TO BE RELIABLE. SINCE THE CONDITIONS OF USE IS OUTSIDE
OUR CONTROL, WE ASSUME NO LIABILITY IN CONNECTION WITH ANY USE OF THIS
INFORMATION AND NO WARRANTY EXPRESSED OR IMPLIED IS GIVEN. CONTACT ESAB
FOR MORE INFORMATION.