| Common Name: | ALL-STATE AQUASAFE NO. 100 FLUX, ALL-STATE DYNAGRIP NO. 430 |
| Manufacturer: | ESAB |
| SDS Revision Date: | 1/14/2018 |
| SDS Format: | No Format Specified |
| Item Number(s): | 400H02 |
| Manufacturer Model Number(s): |
SDS Table of Contents
Click the desired link below to jump directly to that section in the SDS.
ESAB(R*)
SAFETY DATA SHEET
THIS SAFETY DATA SHEET COMPLIES WITH ANNEX II OF 830/2015 AMENDING
EC NO. 1907/2006, CLP DIRECTIVE 1272/2008, ALSO IN ACCORDANCE WITH
ISO 11014-1 AND ANSI Z400.1
ALL-STATE AQUASAFE NO. 100 FLUX
ISSUED: 2018-01-14
| SECTION 1: IDENTIFICATION OF THE SUBSTANCE/MIXTURE |  |
AND OF THE COMPANY/UNDERTAKING
1.1. PRODUCT IDENTIFIER:
TRADE NAME: ALL-STATE AQUASAFE NO. 100 FLUX
1.2. RELEVANT IDENTIFIED USES OF THE SUBSTANCE OR MIXTURE AND USES ADVISED
AGAINST:
USE: GENERAL PURPOSE SOLDERING FLUX
1.3. DETAILS OF THE SUPPLIER OF THE SAFETY DATA SHEET:
SDS CREATED BY: TDS TEAM
SUPPLIER: ESAB DENTON
STREET ADDRESS:
2800 AIRPORT ROAD
DENTON, TX 76207
TELEPHONE: 1-800-372-2123
EMAIL: SDSREQUEST@ESAB.COM
WEB SITE: WWW.ESAB.COM
1.4. EMERGENCY TELEPHONE NUMBER:
EMERGENCY PHONE NUMBER: 1-800-372-2123
AVAILABLE OUTSIDE OFFICE HOURS: NO
OTHER:
AWS CLASSIFICATION: NONE
| SECTION 2: HAZARDS IDENTIFICATION | |
2.1. CLASSIFICATION OF THE SUBSTANCE OR MIXTURE:
CLASSIFICATION ACCORDING TO REGULATION (EC) NO 1272/2008, ANNEX VI:
HAZARD STATEMENTS: H302, H314, H319, H350, H410
2.2. LABEL ELEMENTS:
GHS LABELING OF THE SUBSTANCE (IN ACCORDANCE WITH REGULATION
(EC) NO 1272/2008, ANNEX VI):
HAZARD STATEMENTS:
H302: HARMFUL IF SWALLOWED.
H314: CAUSES SEVERE SKIN BURNS AND EYE DAMAGE.
H319: CAUSES SERIOUS EYE IRRITATION.
H350: MAY CAUSE CANCER.
H410: VERY TOXIC TO AQUATIC LIFE WITH LONG LASTING EFFECTS.
PRECAUTION STATEMENTS:
P201: OBTAIN SPECIAL INSTRUCTIONS BEFORE USE.
P202:
DO NOT HANDLE UNTIL ALL SAFETY PRECAUTIONS HAVE BEEN READ AND UNDERSTOOD.
P261: AVOID BREATHING DUST.
P264: WASH HANDS THOROUGHLY AFTER HANDLING.
P270: DO NO EAT, DRINK OR SMOKE WHEN USING THIS PRODUCT.
P271: USE ONLY OUTDOORS OR IN A WELL-VENTILATED AREA.
P273: AVOID RELEASE TO THE ENVIRONMENT.
P280:
WEAR PROTECTIVE GLOVES/PROTECTIVE CLOTHING/EYE PROTECTION/FACE PROTECTION.
P301 + P312:
IF SWALLOWED: CALL A POISON CENTER/DOCTOR/PHYSICIAN IF YOU FEEL UNWELL.
P302 + P352:
IF ON SKIN: WASH WITH PLENTY OF WATER/SOAP.
P304 + P340:
IF INHALED: REMOVE PERSON TO FRESH AIR AND KEEP COMFORTABLE FOR BREATHING.
P305 + P351 + P338:
IF IN EYES:
RINSE CAUTIOUSLY WITH WATER FOR SEVERAL MINUTES. REMOVE CONTACT LENSES,
IF PRESENT AND EASY TO DO. CONTINUE RINSING.
P308 + P313:
IF EXPOSED OR CONCERNED: GET MEDICAL ADVICE/ATTENTION.
P312: CALL A POISON CENTER/DOCTOR /PHYSICIAN IF YOU FEEL UNWELL.
P321:
SPECIFIC TREATMENT (SEE PRODUCT DOCUMENTS AND OTHER CAUTIONS ON
THIS LABEL).
P330: RINSE MOUTH.
P332 + P313:
IF SKIN IRRITATION OCCURS: GET MEDICAL ADVICE/ATTENTION.
P337 + P313:
IF EYE IRRITATION PERSISTS: GET MEDICAL ADVICE/ATTENTION.
P362 + P364: TAKE OFF CONTAMINATED CLOTHING AND WASH IT BEFORE REUSE.
P391: COLLECT SPILLAGE.
P405: STORE LOCKED UP.
P501:
DISPOSE OF CONTENTS/CONTAINER TO CONTAINERS BY LAWFUL AND APPROPRIATE
DISPOSAL METHOD..
2.3. OTHER HAZARDS:
EMERGENCY OVERVIEW:
A FINE WHITE, BLUE OR RED POWDER WITH NO ODOR. HARMFUL IF SWALLOWED.
AVOID EYE CONTACT OR INHALATION OF DUST FROM THE PRODUCT. DUSTS MAY
IRRITATE THE EYES AND CAN CAUSE RESPIRATORY IRRITATION.
THIS PRODUCT IS NORMALLY NOT CONSIDERED HAZARDOUS AS SHIPPED. GLOVES SHOULD
BE WORN WHEN HANDLING TO PREVENT CONTAMINATING HANDS WITH PRODUCT DUST.
PERSONS WITH A PACEMAKER SHOULD NOT GO NEAR WELDING OR CUTTING OPERATIONS
UNTIL THEY HAVE CONSULTED THEIR DOCTOR AND OBTAINED INFORMATION FROM THE
MANUFACTURER OF THE DEVICE.
WHEN THIS PRODUCT IS USED IN A BRAZING PROCESS, THE MOST IMPORTANT HAZARDS
ARE HEAT, RADIATION, ELECTRIC SHOCK AND BRAZING FUMES.
HEAT: SPATTER AND MELTING METAL CAN CAUSE BURN INJURIES AND START FIRES.
RADIATION: ARC RAYS CAN SEVERELY DAMAGE EYES OR SKIN.
ELECTRICITY: ELECTRIC SHOCK CAN KILL.
FUMES:
OVEREXPOSURE TO BRAZING FUMES MAY RESULT IN SYMPTOMS LIKE METAL FUME FEVER,
DIZZINESS, NAUSEA, DRYNESS OR IRRITATION OF THE NOSE, THROAT, AND EYES.
CHRONIC OVEREXPOSURE TO BRAZING FUMES MAY AFFECT PULMONARY FUNCTION.
FLAME PROCESSING:
WHEN USED WITH COMBUSTIBLE GAS EQUIPMENT (E.G., OXY-ACETYLENE TORCH), READ
THE USE AND SAFETY INFORMATION FOR THAT EQUIPMENT.
| SECTION 3: COMPOSITION/INFORMATION ON INGREDIENTS | |
3.2. MIXTURES:
CHEMICAL NAME CAS NO. CONCENTRATION CLASSIFICATION R-PHRASE
EC NO. H-PHRASE
REACH NO.
PETROLATUM 8009-03-8 40 - 50% CANC2, T H350
232-373-2
ZINC CHLORIDE 7646-85-7 40 - 50% AQUATIC ACUTE H302,
231-592-0 1, AQUATIC H314,
CHRONIC 1, SKIN H410
CORR. 1B, ACUTE
TOX. 4 - ORAL
AMMONIUM 12125-02-9 1 - 10% EYE IRRIT. 2, H302,
CHLORIDE 235-186-4 ACUTE TOX. H319
4 - ORAL
PRODUCT BASED ON: THIS PRODUCT IS A PASTE.
| SECTION 4: FIRST AID MEASURES | |
4.1. DESCRIPTION OF FIRST AID MEASURES:
ELECTRIC SHOCK:
DISCONNECT AND TURN OFF THE POWER. USE A NONCONDUCTIVE MATERIAL TO PULL
VICTIM AWAY FROM CONTACT WITH LIVE PARTS OR WIRES. IF NOT BREATHING,
BEGIN ARTIFICIAL RESPIRATION, PREFERABLY MOUTH-TO-MOUTH. IF NO
DETECTABLE PULSE, BEGIN CPR CALL A PHYSICIAN IMMEDIATELY.
INHALATION:
IF BREATHING HAS STOPPED, PERFORM ARTIFICIAL RESPIRATION AND OBTAIN MEDICAL
ASSISTANCE IMMEDIATELY! IF BREATHING IS DIFFICULT, PROVIDE FRESH AIR AND
CALL PHYSICIAN.
SKIN CONTACT:
FOR SKIN BURNS FROM ARC RADIATION, PROMPTLY FLUSH WITH COLD WATER. GET
MEDICAL ATTENTION FOR BURNS OR IRRITATIONS THAT PERSIST. TO REMOVE DUST
OR PARTICLES WASH WITH MILD SOAP AND WATER.
EYE CONTACT:
FOR RADIATION BURNS DUE TO ARC FLASH, SEE PHYSICIAN. TO REMOVE DUSTS OR
FUMES FLUSH WITH WATER FOR AT LEAST FIFTEEN MINUTES. IF IRRITATION
PERSISTS, OBTAIN MEDICAL ASSISTANCE.
INGESTION:
IF SWALLOWED:
CALL A POISON CENTER OR DOCTOR . RINSE MOUTH. DO NOT INDUCE VOMITING.
4.2. MOST IMPORTANT SYMPTOMS AND EFFECTS, BOTH ACUTE AND DELAYED:
NOT APPLICABLE
4.3. INDICATION OF ANY IMMEDIATE MEDICAL ATTENTION AND SPECIAL TREATMENT
NEEDED:
NOT APPLICABLE
| SECTION 5: FIREFIGHTING MEASURES | |
5.1. EXTINGUISHING MEDIA:
SUITABLE EXTINGUISHING MEDIA:
THE PRODUCT IS NOT FLAMMABLE. USE CO2 OR DRY CHEMICAL ON SURROUNDING FIRE.
DO NOT USE WATER ON FIRE WHERE MOLTEN METAL IS PRESENT.
5.2. SPECIAL HAZARDS ARISING FROM THE SUBSTANCE OR MIXTURE:
IN EXTREMELY HIGH TEMPERATURE FIRES OR IN CONTACT WITH CERTAIN ACIDS, FLUX
MAY EMIT TOXIC FUMES. PASTE DECOMPOSES TO FORM AMMONIA, HYDROGEN CHLORIDE
GAS, AND ZINC CHLORIDE FUMES.
5.3. ADVICE FOR FIREFIGHTERS:
SPECIAL PROTECTIVE EQUIPMENT FOR FIRE-FIGHTERS:
WEAR SELF-CONTAINED BREATHING APPARATUS AS FUMES OR VAPORS MAY BE HARMFUL.
| SECTION 6: ACCIDENTAL RELEASE MEASURES | |
6.1. PERSONAL PRECAUTIONS, PROTECTIVE EQUIPMENT AND EMERGENCY PROCEDURES:
WEAR RESPIRATORY PROTECTION. AVOID DUST FORMATION. AVOID BREATHING VAPORS,
MIST OR GAS.
ENSURE ADEQUATE VENTILATION.
EVACUATE PERSONNEL TO SAFE AREAS. AVOID BREATHING DUST.
USE RESPIRATOR OR AIR SUPPLIED RESPIRATOR WHEN BRAZING IN A CONFINED SPACE,
OR WHERE LOCAL EXHAUST OR VENTILATION IS NOT SUFFICIENT TO KEEP EXPOSURE
VALUES WITHIN SAFE LIMITS. USE SPECIAL CARE WHEN BRAZING PAINTED OR COATED
STEELS SINCE HAZARDOUS SUBSTANCES FROM THE COATING MAY BE EMITTED. WEAR
HAND, HEAD, EYES, EAR AND BODY PROTECTION LIKE WELDERS GLOVES, HELMET OR
FACE SHIELD WITH FILTER LENS, SAFETY BOOTS, APRON, ARM AND SHOULDER
PROTECTION. KEEP PROTECTIVE CLOTHING CLEAN AND DRY.
6.2. ENVIRONMENTAL PRECAUTIONS: REFER TO SECTION 13.
6.3. METHODS AND MATERIAL FOR CONTAINMENT AND CLEANING UP:
NOT APPLICABLE
6.4. REFERENCE TO OTHER SECTIONS: NOT APPLICABLE
OTHER:
SOLID OBJECTS MAY BE PICKED UP AND PLACED INTO A CONTAINER. LIQUIDS OR
PASTES SHOULD BE SCOOPED UP AND PLACED INTO A CONTAINER. WEAR PROPER
PROTECTIVE EQUIPMENT WHILE HANDLING THESE MATERIALS. DO NOT DISCARD AS
REFUSE.
| SECTION 7: HANDLING AND STORAGE | |
7.1. PRECAUTIONS FOR SAFE HANDLING:
PREVENTIVE HANDLING PRECAUTIONS:
WEAR GLOVES AND SAFETY GOGGLES WHEN HANDLING. WASH HANDS AND FACE
THOROUGHLY AFTER HANDLING. DO NOT SWALLOW OR BREATHE VAPORS PRODUCED
BY USE OF PRODUCT. WASH HANDS AFTER USING. SOME INDIVIDUALS CAN DEVELOP
AN ALLERGIC REACTION TO CERTAIN MATERIALS.
7.2. CONDITIONS FOR SAFE STORAGE, INCLUDING ANY INCOMPATIBILITIES:
KEEP SEPARATE FROM CHEMICAL SUBSTANCES LIKE ACIDS AND STRONG BASES,
WHICH COULD CAUSE CHEMICAL REACTIONS. STORE IN COOL/WELL-VENTILATED
PLACE.
7.3. SPECIFIC END USE(S): GENERAL PURPOSE SOLDERING FLUX
| SECTION 8: EXPOSURE CONTROLS/PERSONAL PROTECTION | |
8.1. CONTROL PARAMETERS:
EXPOSURE LIMITS:
USE INDUSTRIAL HYGIENE MONITORING EQUIPMENT TO ENSURE THAT EXPOSURE DOES
NOT EXCEED APPLICABLE NATIONAL EXPOSURE LIMITS. THE FOLLOWING LIMITS CAN
BE USED AS GUIDANCE. UNLESS NOTED, ALL VALUES ARE FOR 8 HOUR TIME WEIGHTED
AVERAGES (TWA).
NATIONAL OCCUPATIONAL EXPOSURE LIMITS:
INGREDIENT CAS NO. EC NO. EXPOSURE SHORT-TERM
LIMIT EXPOSURE
MG/M3- LIMIT
PPM MG/M3-PPM
AMMONIUM 12125-02-9 235-186-4
CHLORIDE
PETROLATUM 8009-03-8 232-373-2
ZINC CHLORIDE 7646-85-7 231-592-0 1
INGREDIENT REMARK SOURCE YEAR
AMMONIUM NO PEL OSHA 2017
CHLORIDE
PETROLATUM OSHA 2017
ZINC CHLORIDE OSHA 2017
8.2. EXPOSURE CONTROLS:
TECHNICAL PRECAUTION MEASURES:
ENSURE SUFFICIENT VENTILATION, LOCAL EXHAUST, OR BOTH. KEEP WORKING PLACE
AND PROTECTIVE CLOTHING CLEAN AND DRY. CHECK CONDITION OF PROTECTIVE
CLOTHING AND EQUIPMENT ON A REGULAR BASIS. TRAIN WELDERS TO AVOID CONTACT
WITH LIVE ELECTRICAL PARTS AND INSULATE CONDUCTIVE PARTS.
OTHER:
AVOID EXPOSURE TO BRAZING AND WELDING FUMES, RADIATION, SPATTER, ELECTRIC
SHOCK, HEATED MATERIALS AND DUST.
| SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES | |
9.1. INFORMATION ON BASIC PHYSICAL AND CHEMICAL PROPERTIES:
APPEARANCE: YELLOW/ORANGE ODORLESS PASTE.
APPEARANCE, COLOUR: NOT APPLICABLE
APPEARANCE, PHYSICAL STATE: NOT APPLICABLE
AUTO-IGNITION TEMPERATURE: NOT APPLICABLE
DECOMPOSITION TEMPERATURE: NOT APPLICABLE
EVAPORATION RATE: NOT APPLICABLE
EXPLOSIVE PROPERTIES: NOT APPLICABLE
FLAMMABILITY (SOLID, GAS): NOT APPLICABLE
FLASH POINT: 282 DEG. C/540 DEG. F
FREEZING POINT: 63 DEG. C/145 DEG. F
INITIAL BOILING POINT AND BOILING RANGE: NOT APPLICABLE
MELTING POINT / FREEZING POINT: NOT APPLICABLE
ODOUR: NOT APPLICABLE
ODOUR TRESHOLD: NOT APPLICABLE
OXIDISING PROPERTIES: NOT APPLICABLE
PARTITION COEFFICIENT:
N-OCTANOL / WATER: NOT APPLICABLE
PH VALUE: NOT APPLICABLE
RELATIVE DENSITY: NOT APPLICABLE
SOLUBILITY: NOT APPLICABLE
SOLUBILITY IN WATER: INSOLUBLE
SPECIFIC GRAVITY: 1,1
UPPER / LOWER FLAMMABILITY OR EXPLOSIVE LIMITS: NOT APPLICABLE
VAPOUR DENSITY: >1
VAPOUR PRESSURE: NOT APPLICABLE
VISCOSITY: NOT APPLICABLE
9.2. OTHER INFORMATION: NOT APPLICABLE
| SECTION 10: STABILITY AND REACTIVITY | |
10.1. REACTIVITY:
REACTIVITY:
CONTACT WITH CHEMICAL SUBSTANCES LIKE ACIDS OR STRONG BASES COULD CAUSE
GENERATION OF GAS.
10.2. CHEMICAL STABILITY:
CHEMICAL STABILITY: THIS PRODUCT IS STABLE UNDER NORMAL CONDITIONS.
10.3. POSSIBILITY OF HAZARDOUS REACTIONS: NOT APPLICABLE
10.4. CONDITIONS TO AVOID: NOT APPLICABLE
10.5. INCOMPATIBLE MATERIALS: NOT APPLICABLE
10.6. HAZARDOUS DECOMPOSITION PRODUCTS: NOT APPLICABLE
OTHER:
THIS PRODUCT IS ONLY INTENDED FOR NORMAL SOLDERING PURPOSES.
WHEN THIS PRODUCT IS USED IN A SOLDERING PROCESS, HAZARDOUS DECOMPOSITION
PRODUCTS WOULD INCLUDE THOSE FROM THE VOLATILIZATION, REACTION, OR
OXIDATION OF THE MATERIALS LISTED IN SECTION 3, AND THOSE FROM THE BASE
METAL AND COATING. FUMES FROM THIS PRODUCT MAY CONTAIN COMPOUNDS OF THE
FOLLOWING CHEMICAL ELEMENTS: Pb, Sn, Zn.
REFER TO APPLICABLE NATIONAL EXPOSURE LIMITS FOR FUME COMPOUNDS, INCLUDING
THOSE EXPOSURE LIMITS FOR FUME COMPOUNDS FOUND IN SECTION 8.
REASONABLY EXPECTED GASEOUS PRODUCTS WOULD INCLUDE CARBON OXIDES, NITROGEN
OXIDES AND OZONE. AIR CONTAMINANTS AROUND THE WELDING AREA CAN BE AFFECTED
BY THE WELDING PROCESS AND INFLUENCE THE COMPOSITION AND QUANTITY OF FUMES
AND GASES PRODUCED.
| SECTION 11: TOXICOLOGICAL INFORMATION | |
11.1. INFORMATION ON TOXICOLOGICAL EFFECTS:
INFORMATION ON TOXICOLOGICAL EFFECTS:
INHALATION OF BRAZING AND WELDING FUMES AND GASES CAN BE DANGEROUS TO YOUR
HEALTH. CLASSIFICATION OF BRAZING AND WELDING FUMES IS DIFFICULT BECAUSE OF
VARYING BASE MATERIALS, COATINGS, AIR CONTAMINATION AND PROCESSES. THE
INTERNATIONAL AGENCY FOR RESEARCH ON CANCER HAS CLASSIFIED WELDING FUMES AS
POSSIBLY CARCINOGENIC TO HUMANS (GROUP 2B).
ACUTE TOXICITY:
OVEREXPOSURE TO SOLDERING FUMES MAY RESULT IN SYMPTOMS LIKE METAL FUME
FEVER, DIZZINESS, NAUSEA, DRYNESS OR IRRITATION OF THE NOSE, THROAT OR
EYES.
SKIN CORROSION/IRRITATION: NO DATA AVAILABLE
SERIOUS EYE DAMAGE/IRRITATION: NO DATA AVAILABLE
RESPIRATORY/SKIN SENSITIZATION: NO DATA AVAILABLE
GERM CELL MUTAGENICITY: NO DATA AVAILABLE
GENOTOXICITY: NO DATA AVAILABLE
CARCINOGENICITY: NO DATA AVAILABLE
REPEATED DOSE TOXICITY: NO DATA AVAILABLE
REPRODUCTIVE TOXICITY: NO DATA AVAILABLE
STOT-SINGLE EXPOSURE: NO DATA AVAILABLE
STOT-REPEATED EXPOSURE: NO DATA AVAILABLE
ASPIRATION HAZARD: NO DATA AVAILABLE
LD50 ORAL: NO DATA AVAILABLE
LD50 DERMAL: NO DATA AVAILABLE
LC50 INHALATION: NO DATA AVAILABLE
| SECTION 12: ECOLOGICAL INFORMATION | |
12.1. TOXICITY:
ACUTE TOXICITY: NO DATA AVAILABLE
TOXICITY: NO DATA AVAILABLE
AQUATIC: NO DATA AVAILABLE
SOIL: NO DATA AVAILABLE
ACUTE FISH TOXICITY: NO DATA AVAILABLE
ACUTE ALGAE TOXICITY: NO DATA AVAILABLE
ACUTE CRUSTACEAN TOXICITY: NO DATA AVAILABLE
CHRONICAL TOXICITY:
THIS PRODUCT CONTAINS ZINC CHLORIDE, WHICH IS CLASSIFIED BY CLP DIRECTIVE
REGULATION (EC) NO 1272/2008 , AS TOXIC TO AQUATIC ORGANISMS AND MAY CAUSE
LONG-TERM ADVERSE EFFECTS IN THE AQUATIC ENVIRONMENT.
12.2. PERSISTENCE AND DEGRADABILITY:
PERSISTENCE AND DEGRADABILITY: NO DATA AVAILABLE
DECAY/TRANSFORMATION: NO DATA AVAILABLE
12.3. BIOACCUMULATIVE POTENTIAL:
BIOACCUMULATIVE POTENTIAL: NO DATA AVAILABLE
12.4. MOBILITY IN SOIL:
MOBILITY: NO DATA AVAILABLE
12.5. RESULTS OF PBT AND VPVB ASSESSMENT:
RESULTS OF PBT AND VPVB ASSESSMENT: NO DATA AVAILABLE
12.6. OTHER ADVERSE EFFECTS: NOT APPLICABLE
OTHER:
CONTAINS ZINC WHICH MAY BE TOXIC TO AQUATIC SPECIES AND IS REGULATED AS AN
ENVIRONMENTAL HAZARD IN THE EUROPEAN UNION. THIS HAZARD IS NOT ANTICIPATED
FROM THE HANDLING OF BRAZING CONSUMABLES BUT IS RELEVANT IF CONSUMABLES
ENTER NATURAL WATERWAYS. SOLDERING CONSUMABLES AND MATERIALS COULD
DEGRADE/WEATHER INTO COMPONENTS ORIGINATING FROM THE CONSUMABLES OR FROM
THE MATERIALS USED IN THE SOLDERING PROCESS. AVOID EXPOSURE TO CONDITIONS
THAT COULD LEAD TO ACCUMULATION IN SOILS OR GROUNDWATER.
| SECTION 13: DISPOSAL CONSIDERATIONS | |
13.1. WASTE TREATMENT METHODS:
DISPOSAL CONSIDERATIONS:
DISCARD ANY PRODUCT, RESIDUE, DISPOSABLE CONTAINER OR LINER IN AN
ENVIRONMENTALLY ACCEPTABLE MANNER, IN FULL COMPLIANCE WITH FEDERAL
AND LOCAL REGULATIONS. USE RECYCLING PROCEDURES IF AVAILABLE.
USA RCRA: THIS PRODUCT IS NOT CONSIDERED HAZARDOUS WASTE IF DISCARDED.
RESIDUES FROM BRAZING AND WELDING CONSUMABLES AND PROCESSES COULD DEGRADE
AND ACCUMULATE IN SOILS AND GROUNDWATER.
| SECTION 14: TRANSPORT INFORMATION | |
14.1. UN NUMBER: NOT APPLICABLE
14.2. UN PROPER SHIPPING NAME: NOT APPLICABLE
14.3. TRANSPORT HAZARD CLASS(ES): NOT APPLICABLE
14.4. PACKING GROUP: NOT APPLICABLE
14.5. ENVIRONMENTAL HAZARDS: NOT APPLICABLE
14.6. SPECIAL PRECAUTIONS FOR USER: NOT APPLICABLE
14.7. TRANSPORT IN BULK ACCORDING TO ANNEX II OF MARPOL AND THE IBC CODE:
NOT APPLICABLE
OTHER:
U.S. DEPARTMENT OF TRANSPORTATION GROUND (49CFR): NOT DANGEROUS GOODS
INTERNATIONAL AIR TRANSPORTATION (ICAO/IATA): NOT DANGEROUS GOODS
INTERNATIONAL MARITIME ORGANIZATION (IMO/IMDG): NOT DANGEROUS GOODS
| SECTION 15: REGULATORY INFORMATION | |
15.1 SAFETY, HEALTH AND ENVIRONMENTAL REGULATIONS/LEGISLATION SPECIFIC
FOR THE SUBSTANCE OR MIXTURE:
EU REGULATIONS:
REGULATION (EC) NO 1907/2006 OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL
OF 18 DECEMBER 2006 CONCERNING THE REGISTRATION, EVALUATION, AUTHORISATION
AND RESTRICTION OF CHEMICALS (REACH), ESTABLISHING A EUROPEAN CHEMICALS
AGENCY, AMENDING DIRECTIVE 1999/45/EC AND REPEALING COUNCIL REGULATION
(EEC) NO 793/93 AND COMMISSION REGULATION (EC) NO 1488/94 AS WELL AS
COUNCIL DIRECTIVE 76/769/EEC AND COMMISSION DIRECTIVES 91/155/EEC,
93/67/EEC, 93/105/EC AND 2000/21/EC.
REGULATION (EC) NO 1272/2008 OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL
OF 16 DECEMBER 2008 ON CLASSIFICATION, LABELLING AND PACKAGING OF
SUBSTANCES AND MIXTURES, AMENDING AND REPEALING DIRECTIVES 67/548/EEC AND
1999/45/EC, AND AMENDING REGULATION (EC) NO 1907/2006
COMMISSION REGULATION (EU) 2015/830 OF 28 MAY 2015 AMENDING REGULATION
(EC) NO 1907/2006 OF THE EUROPEAN PARLIAMENT AND THE COUNCIL CONCERNING
THE REGISTRATION, EVALUATION, AUTHORISATION AND RESTRICTION OF CHEMICALS
(REACH)
DIRECTIVE 2008/98/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL. OF 19
NOVEMBER 2008. ON WASTE AND REPEALING CERTAIN DIRECTIVES.
EUROPEAN PARLIAMENT AND COUNCIL DIRECTIVE 94/62/EC OF 20 DECEMBER 1994 ON
PACKAGING AND PACKAGING WASTE.
OTHER REGULATIONS, LIMITATIONS AND LEGAL REGULATIONS:
POLAND REGULATIONS:
ACT OF 25 FEBRUARY 2011 ON THE CHEMICAL SUBSTANCES AND THEIR
MIXTURES(OJ # 63, POZ. 322).
REGULATION OF THE MINISTER OF LABOUR AND SOCIAL POLICY OF 6 JUNE 2014 ON
MAXIMUM PERMISSIBLE CONCENTRATION AND INTENSITY OF AGENTS HARMFUL TO HEALTH
IN THE WORKING ENVIRONMENT (DZ. U. Z. 2014, POZ 817).
THE ACT ON WASTE OF 14 DECEMBER 2012, JOURNAL OF LAWS OF 2013, ITEM 21 WITH
AMENDMENTS ACT OF 13TH JUNE 2013 ON PACKAGING MANAGEMENT AND PACKAGING
WASTE (JOURNAL OF LAWS OF 2013, ITEM 888).
REGULATION OF THE MINISTER OF THE ENVIRONMENT OF 9 DECEMBER 2014 ON WASTE
CATALOGUE (JOURNAL OF LAWS OF 2014, ITEM 1923).
REGULATION OF THE MINISTER OF ECONOMY OF 21 DECEMBER 2005. CONCERNING
ESSENTIAL REQUIREMENTS FOR PERSONAL PROTECTIVE EQUIPMENT (JOURNAL.
LAWS NO. 259, ITEM. 2173).
REGULATION OF THE MINISTER OF HEALTH OF 2 FEBRUARY 2011 ON TESTS AND
MEASUREMENTS OF FACTORS HARMFUL TO HEALTH IN THE WORKING ENVIRONMENT
(THE JOURNAL OF LAWS 2011, NO. 33, ITEM 166).
USA REGULATIONS:
USA:
THIS PRODUCT CONTAINS OR PRODUCES A CHEMICAL KNOWN TO THE STATE OF
CALIFORNIA TO CAUSE CANCER AND BIRTH DEFECTS (OR OTHER REPRODUCTIVE
HARM). (CALIFORNIA HEALTH & SAFETY CODE SUBSECTION 25249.5 ET SEQ.)
CERCLA/SARA TITLE III REPORTABLE QUANTITIES (RQS) AND/OR THRESHOLD
PLANNING QUANTITIES (TPQS):
PRODUCT IS A SOLID SOLUTION IN THE FORM OF A SOLID ARTICLE. SPILLS OR
RELEASES RESULTING IN THE LOSS OF ANY INGREDIENT AT OR ABOVE ITS RQ
REQUIRE IMMEDIATE NOTIFICATION TO THE NATIONAL RESPONSE CENTER AND TO
YOUR LOCAL EMERGENCY PLANNING COMMITTEE.
EPCRA/SARA TITLE III 313 TOXIC CHEMICALS:
THE FOLLOWING METALLIC COMPONENTS ARE LISTED AS SARA 313 "TOXIC
CHEMICALS" AND POTENTIAL SUBJECT TO ANNUAL SARA 313 REPORTING. SEE
SECTION 3 FOR WEIGHT PERCENT.
CANADA:
WHMIS CLASSIFICATION: CLASS D; DIVISION 2, SUBDIVISION A
INTERNATIONAL INVENTORIES:
AUSTRALIA:
THE SUBSTANCE(S) IN THIS PRODUCT IS/ARE IN COMPLIANCE WITH THE INVENTORY
REQUIREMENTS OF AUSTRALIAN INVENTORY OF CHEMICAL SUBSTANCES (AICS)
UNITED STATES EPA TOXIC SUBSTANCE CONTROL ACT:
ALL CONSTITUENTS OF THIS PRODUCT ARE ON THE TSCA INVENTORY LIST OR ARE
EXCLUDED FROM LISTING.
CANADIAN ENVIRONMENTAL PROTECTION ACT (CEPA):
ALL CONSTITUENT(S) OF THIS PRODUCT IS/ARE ON THE DOMESTIC SUBSTANCE LIST
(DSL).
15.2. CHEMICAL SAFETY ASSESSMENT:
CHEMICAL SAFETY ASSESSMENT: NO DATA AVAILABLE
OTHER:
READ AND UNDERSTAND THE MANUFACTURER'S INSTRUCTIONS, YOUR EMPLOYER'S SAFETY
PRACTICES AND THE HEALTH AND SAFETY INSTRUCTIONS ON THE LABEL. OBSERVE ANY
FEDERAL AND LOCAL REGULATIONS. TAKE PRECAUTIONS WHEN WELDING AND PROTECT
YOURSELF AND OTHERS.
WARNING:
WELDING FUMES AND GASES ARE HAZARDOUS TO YOUR HEALTH AND MAY DAMAGE LUNGS
AND OTHER ORGANS. USE ADEQUATE VENTILATION.
ELECTRIC SHOCK CAN KILL. ARC RAYS AND SPARKS CAN INJURE EYES AND BURN SKIN.
WEAR CORRECT HAND, HEAD, EYE AND BODY PROTECTION.
| SECTION 16: OTHER INFORMATION | |
CHANGES TO PREVIOUS REVISION:
THIS SAFETY DATA SHEET HAS BEEN REVISED DUE TO MODIFICATIONS TO SECTIONS
1-16. THIS SDS SUPERSEDES... 1027/05
REFERENCES TO KEY LITERATURE AND DATA SOURCES:
REFER TO ESAB "WELDING AND CUTTING - RISKS AND MEASURES", F52-529
"PRECAUTIONS AND SAFE PRACTICES FOR ELECTRIC WELDING AND CUTTING" AND
F2035 "PRECAUTIONS AND SAFE PRACTICES FOR GAS WELDING, CUTTING AND
HEATING" AVAILABLE FROM ESAB, AND TO: WWW.ESAB.COM
PHRASE MEANING:
CANC2: CANCER, CATEGORY 2
T: TOXIC
ACUTE TOX. 4: ORAL - ACUTE TOXICITY, ORAL, HAZARD CATEGORY 4
AQUATIC ACUTE 1:
HAZARDOUS TO THE AQUATIC ENVIRONMENT - ACUTE HAZARD CATEGORY 1
AQUATIC CHRONIC 1:
HAZARDOUS TO THE AQUATIC ENVIRONMENT - CHRONIC HAZARD CATEGORY 1
EYE IRRIT. 2: EYE IRRITATION, HAZARD CATEGORY 2
SKIN CORR. 1B: SKIN CORROSION, HAZARD CATEGORY 1B
H302: HARMFUL IF SWALLOWED.
H314: CAUSES SEVERE SKIN BURNS AND EYE DAMAGE.
H319: CAUSES SERIOUS EYE IRRITATION.
H350: MAY CAUSE CANCER.
H410: VERY TOXIC TO AQUATIC LIFE WITH LONG LASTING EFFECTS.
OTHER:
ADDITIONAL INFORMATION:
USA:
CONTACT ESAB AT WWW.ESABNA.COM OR 1-800 ESAB-123 IF YOU HAVE ANY QUESTIONS
ABOUT THIS SDS. AMERICAN NATIONAL STANDARD Z49.1 SAFETY IN WELDING AND
CUTTING, ANSI/AWS F1.5 METHODS FOR SAMPLING AND ANALYZING GASES FROM
WELDING AND ALLIED PROCESSES, ANSI/AWS F1.1 "METHOD FOR SAMPLING AIRBORNE
PARTICLES GENERATED BY WELDING AND ALLIED PROCESSES", AWSF3.2M/F3.2
"VENTILATION GUIDE FOR WELD FUME", 550 NORTH LE JEUNE ROAD, MIAMI FLORIDA
33135. SAFETY AND HEALTH FACT SHEETS AVAILABLE FROM AWS AT WWW.AWS.ORG.
OSHA PUBLICATION 2206 (29 C.F.R. 1910), U.S. GOVERNMENT PRINTING OFFICE,
SUPERINTENDENT OF DOCUMENTS, P.O. BOX 371954, PITTSBURGH, PA 15250-7954
AMERICAN CONFERENCE OF GOVERNMENTAL HYGIENISTS (ACGIH), THRESHOLD LIMIT
VALUES AND BIOLOGICAL EXPOSURE INDICES, 6500 GLENWAY AVE., CINCINNATI,
OHIO 45211, USA.
NFPA 51B "STANDARD FOR FIRE PREVENTION DURING WELDING, CUTTING AND OTHER
HOT WORK" PUBLISHED BY THE NATIONAL FIRE PROTECTION ASSOCIATION, 1
BATTERYMARCH PARK, QUINCY, MA 02169
UK:
WMA PUBLICATION 236 AND 237, "HAZARDS FROM WELDING FUME", "THE ARC WELDER
AT WORK, SOME GENERAL ASPECTS OF HEALTH AND SAFETY".
GERMANY:
ACCIDENT PREVENTION REGULATION BGV D1, "WELDING, CUTTING AND RELATED
PROCEDURES"
CANADA:
CSA STANDARD CAN/CSA-W117.2-01 "SAFETY IN WELDING, CUTTING, AND ALLIED
PROCESSES".
THIS PRODUCT HAS BEEN CLASSIFIED ACCORDING TO THE HAZARD CRITERIA OF THE
CPR AND THE SDS CONTAINS ALL OF THE INFORMATION REQUIRED BY THE CPR.
ESAB REQUESTS THE USERS OF THIS PRODUCT TO STUDY THIS SAFETY DATA SHEET
(SDS) AND BECOME AWARE OF PRODUCT HAZARDS AND SAFETY INFORMATION. TO
PROMOTE SAFE USE OF THIS PRODUCT A USER SHOULD:
NOTIFY ITS EMPLOYEES, AGENTS AND CONTRACTORS OF THE INFORMATION ON THIS
SDS AND ANY PRODUCT HAZARDS/SAFETY INFORMATION.FURNISH THIS SAME
INFORMATION TO EACH OF ITS CUSTOMERS FOR THE PRODUCTS REQUEST SUCH
CUSTOMERS TO NOTIFY EMPLOYEES AND CUSTOMERS FOR THE SAME PRODUCT HAZARDS
AND SAFETY INFORMATION.
THE INFORMATION HEREIN IS GIVEN IN GOOD FAITH AND BASED ON TECHNICAL DATA
THAT ESAB BELIEVES TO BE RELIABLE. SINCE THE CONDITIONS OF USE IS OUTSIDE
OUR CONTROL, WE ASSUME NO LIABILITY IN CONNECTION WITH ANY USE OF THIS
INFORMATION AND NO WARRANTY EXPRESSED OR IMPLIED IS GIVEN. CONTACT ESAB
FOR MORE INFORMATION.
ESAB(R*)
SAFETY DATA SHEET
THIS SAFETY DATA SHEET COMPLIES WITH ANNEX II OF 830/2015 AMENDING EC NO.
1907/2006, CLP DIRECTIVE 1272/2008, ALSO IN ACCORDANCE WITH ISO 11014-1
AND ANSI Z400.1
ALL-STATE DYNAGRIP NO. 430
ISSUED: 2018-01-14
| SECTION 1: IDENTIFICATION OF THE SUBSTANCE/MIXTURE | |
AND OF THE COMPANY/UNDERTAKING
1.1. PRODUCT IDENTIFIER:
TRADE NAME: ALL-STATE DYNAGRIP NO. 430
1.2. RELEVANT IDENTIFIED USES OF THE SUBSTANCE OR MIXTURE AND USES ADVISED
AGAINST:
USE: WIRE USED FOR SOLDERING COPPER AND COPPER BASED ALLOYS
1.3. DETAILS OF THE SUPPLIER OF THE SAFETY DATA SHEET:
SDS CREATED BY: TDS TEAM
SUPPLIER: ESAB DENTON
STREET:
ADDRESS 2800 AIRPORT ROAD
DENTON, TX 76207
TELEPHONE: 1-800-372-2123
EMAIL: SDSREQUEST@ESAB.COM
WEB SITE: WWW.ESAB.COM
1.4. EMERGENCY TELEPHONE NUMBER:
EMERGENCY PHONE NUMBER: 1-800-372-2123
AVAILABLE OUTSIDE OFFICE HOURS: NO
| SECTION 2: HAZARDS IDENTIFICATION | |
2.1. CLASSIFICATION OF THE SUBSTANCE OR MIXTURE:
THE PRODUCT IS NOT CLASSIFIED
2.2. LABEL ELEMENTS: THE PRODUCT DO NOT REQUIRE LABELING
2.3. OTHER HAZARDS:
PERSONS WITH A PACEMAKER SHOULD NOT GO NEAR WELDING OR CUTTING OPERATIONS
UNTIL THEY HAVE CONSULTED THEIR DOCTOR AND OBTAINED INFORMATION FROM THE
MANUFACTURER OF THE DEVICE. WHEN THIS PRODUCT IS USED IN A SOLDERING
PROCESS, THE MOST IMPORTANT HAZARDS ARE HEAT, RADIATION, ELECTRIC SHOCK
AND SOLDERING FUMES.
FUMES:
OVEREXPOSURE TO WELDING FUMES MAY RESULT IN SYMPTOMS LIKE METAL FUME FEVER,
DIZZINESS, NAUSEA, DRYNESS OR IRRITATION OF THE NOSE, THROAT OR EYES.
CHRONIC OVEREXPOSURE TO WELDING FUMES MAY AFFECT PULMONARY FUNCTION. SOME
INDIVIDUALS MAY DEVELOP A BLUE-GREY SKIN PIGMENTATION FROM EXPOSURE TO
SILVER (ARGYRIA).
HEAT: SPATTER AND MELTING METAL CAN CAUSE BURN INJURIES AND START FIRES.
RADIATION: ARC RAYS CAN SEVERELY DAMAGE EYES OR SKIN.
ELECTRICITY: ELECTRIC SHOCK CAN KILL.
FLAME PROCESSING:
WHEN USED WITH COMBUSTIBLE GAS EQUIPMENT (E.G., OXY-ACETYLENE TORCH), READ
THE USE AND SAFETY INFORMATION FOR THAT EQUIPMENT.
OTHER:
SILVER-WHITE METAL WIRE. THIS PRODUCT IS NORMALLY NOT CONSIDERED HAZARDOUS
AS SHIPPED. GLOVES SHOULD BE WORN WHEN HANDLING TO PREVENT CUTS AND
ABRASIONS.
| SECTION 3: COMPOSITION/INFORMATION ON INGREDIENTS | |
3.2. MIXTURES:
CHEMICAL NAME CAS NO. CONCENTRATION CLASSIFICATION R-PHRASE
EC NO. H-PHRASE
REACH NO.
TIN 7440-31-5 94 - 99%
231-141-8
SILVER 7440-22-4 1 - 6%
213-131-3
PRODUCT BASED ON: THIS PRODUCT IS A SOLID METAL WIRE.
| SECTION 4: FIRST AID MEASURES | |
4.1. DESCRIPTION OF FIRST AID MEASURES:
ELECTRIC SHOCK:
DISCONNECT AND TURN OFF THE POWER. USE A NONCONDUCTIVE MATERIAL TO PULL
VICTIM AWAY FROM CONTACT WITH LIVE PARTS OR WIRES. IF NOT BREATHING,
BEGIN ARTIFICIAL RESPIRATION, PREFERABLY MOUTH-TO-MOUTH. IF NO DETECTABLE
PULSE, BEGIN CARDIO PULMONARY RESUSCITATION (CPR). CALL A PHYSICIAN
IMMEDIATELY.
INHALATION:
IF BREATHING HAS STOPPED, PERFORM ARTIFICIAL RESPIRATION AND OBTAIN MEDICAL
ASSISTANCE IMMEDIATELY! IF BREATHING IS DIFFICULT, PROVIDE FRESH AIR AND
CALL PHYSICIAN. OBTAIN MEDICAL ASSISTANCE FOR IRRITATION OR ANY OTHER
SYMPTOM.
SKIN CONTACT:
FOR SKIN BURNS FROM ARC RADIATION, PROMPTLY FLUSH WITH COLD WATER. GET
MEDICAL ATTENTION FOR BURNS OR IRRITATIONS THAT PERSIST. TO REMOVE DUST
OR PARTICLES WASH WITH MILD SOAP AND WATER.
EYE CONTACT:
FOR RADIATION BURNS DUE TO ARC FLASH, SEE PHYSICIAN. TO REMOVE DUSTS
OR FUMES FLUSH WITH WATER FOR AT LEAST FIFTEEN MINUTES. IF IRRITATION
PERSISTS, OBTAIN MEDICAL ASSISTANCE.
4.2. MOST IMPORTANT SYMPTOMS AND EFFECTS, BOTH ACUTE AND DELAYED:
NOT APPLICABLE
4.3. INDICATION OF ANY IMMEDIATE MEDICAL ATTENTION AND SPECIAL TREATMENT
NEEDED:
NOT APPLICABLE
| SECTION 5: FIREFIGHTING MEASURES | |
5.1. EXTINGUISHING MEDIA:
SUITABLE EXTINGUISHING MEDIA:
NO SPECIFIC RECOMMENDATIONS FOR SOLDERING CONSUMABLES.THE SOLDERING PROCESS
CAN IGNITE COMBUSTIBLE AND FLAMMABLE MATERIALS. USE THE EXTINGUISHING MEDIA
RECOMMENDED FOR THE BURNING MATERIALS AND FIRE SITUATION.
5.2. SPECIAL HAZARDS ARISING FROM THE SUBSTANCE OR MIXTURE:
NOT APPLICABLE
5.3. ADVICE FOR FIREFIGHTERS:
SPECIAL PROTECTIVE EQUIPMENT FOR FIRE-FIGHTERS:
WEAR SELF-CONTAINED BREATHING APPARATUS AS FUMES OR VAPORS MAY BE HARMFUL.
| SECTION 6: ACCIDENTAL RELEASE MEASURES | |
6.1. PERSONAL PRECAUTIONS, PROTECTIVE EQUIPMENT AND EMERGENCY PROCEDURES:
WEAR HAND, HEAD, EYES, EAR AND BODY PROTECTION LIKE WELDERS GLOVES, HELMET
OR FACE SHIELD WITH FILTER LENS, SAFETY BOOTS, APRON, ARM AND SHOULDER
PROTECTION. KEEP PROTECTIVE CLOTHING CLEAN AND DRY.
6.2. ENVIRONMENTAL PRECAUTIONS: REFER TO SECTION 13.
6.3. METHODS AND MATERIAL FOR CONTAINMENT AND CLEANING UP:
SOLID OBJECTS MAY BE PICKED UP AND PLACED INTO A CONTAINER. LIQUIDS OR
PASTES SHOULD BE SCOOPED UP AND PLACED INTO A CONTAINER. WEAR PROPER
PROTECTIVE EQUIPMENT WHILE HANDLING THESE MATERIALS. DO NOT DISCARD AS
REFUSE.
6.4. REFERENCE TO OTHER SECTIONS: REFER TO SECTION 8/13
| SECTION 7: HANDLING AND STORAGE | |
7.1. PRECAUTIONS FOR SAFE HANDLING:
PREVENTIVE HANDLING PRECAUTIONS:
HANDLE WITH CARE TO AVOID STINGS AND CUTS. WEAR GLOVES WHEN HANDLING
SOLDERING CONSUMABLES. AVOID EXPOSURE TO DUST. DO NOT INGEST. DO NOT
BREATHE VAPORS PRODUCED BY USE OF THIS PRODUCT. SOME INDIVIDUALS CAN
DEVELOP AN ALLERGIC REACTION TO CERTAIN MATERIALS. RETAIN ALL WARNING
AND IDENTITY LABELS.
7.2. CONDITIONS FOR SAFE STORAGE, INCLUDING ANY INCOMPATIBILITIES:
KEEP SEPARATE FROM CHEMICAL SUBSTANCES LIKE ACIDS AND STRONG BASES, WHICH
COULD CAUSE CHEMICAL REACTIONS.
7.3. SPECIFIC END USE(S): SOLDERING
| SECTION 8: EXPOSURE CONTROLS/PERSONAL PROTECTION | |
8.1. CONTROL PARAMETERS:
EXPOSURE LIMITS:
USE INDUSTRIAL HYGIENE MONITORING EQUIPMENT TO ENSURE THAT EXPOSURE DOES
NOT EXCEED APPLICABLE NATIONAL EXPOSURE LIMITS. THE FOLLOWING LIMITS CAN
BE USED AS GUIDANCE. UNLESS NOTED, ALL VALUES ARE FOR 8 HOUR TIME WEIGHTED
AVERAGES (TWA). FOR INFORMATION ABOUT WELDING FUME ANALYSIS REFER TO
SECTION 10.
NATIONAL OCCUPATIONAL EXPOSURE LIMITS:
INGREDIENT CAS NO. EC NO. EXPOSURE SHORT-TERM
LIMIT EXPOSURE
MG/M3- LIMIT
PPM MG/M3-PPM
TIN 7440-31-5 231-141-8 2
SILVER 7440-22-4 213-131-3 0,01
INGREDIENT REMARK SOURCE YEAR
TIN Sn OSHA 2016
SILVER Ag OSHA 2016
8.2. EXPOSURE CONTROLS: NOT APPLICABLE
OTHER:
AVOID EXPOSURE TO SOLDERING FUMES, RADIATION, SPATTER, ELECTRIC SHOCK,
HEATED MATERIALS AND DUST. TRAIN WELDERS TO AVOID CONTACT WITH LIVE
ELECTRICAL PARTS AND INSULATE CONDUCTIVE PARTS.
VENTILATION:
USE RESPIRATOR OR AIR SUPPLIED RESPIRATOR WHEN SOLDERING IN A CONFINED
SPACE, OR WHERE LOCAL VENTILATION IS NOT SUFFICIENT TO KEEP EXPOSURE
VALUES WITHIN SAFE LIMITS. USE SPECIAL CARE WHEN SOLDERING PAINTED OR
COATED STEELS SINCE HAZARDOUS SUBSTANCES FROM THE COATING MAY BE EMITTED.
ENSURE SUFFICIENT VENTILLATION, LOCAL EXHAUST, OR BOTH, TO KEEP SOLDERING
FUMES AND GASES FROM THE BREATHING ZONE AND GENERAL AREA.
| SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES | |
9.1. INFORMATION ON BASIC PHYSICAL AND CHEMICAL PROPERTIES:
APPEARANCE: WIRE
APPEARANCE, COLOUR: SILVER GREY
APPEARANCE, PHYSICAL STATE: SOLID
AUTO-IGNITION TEMPERATURE: PRODUCT IS NOT SELF IGNITING.
DECOMPOSITION TEMPERATURE: NO DATA AVAILABLE
EVAPORATION RATE: NOT APPLICABLE
EXPLOSIVE PROPERTIES: PRODUCT DOES NOT PRESENT AN EXPLOSION HAZARD.
FLAMMABILITY (SOLID, GAS): NOT APPLICABLE
FLASH POINT: NOT APPLICABLE
INITIAL BOILING POINT AND BOILING RANGE: NO DATA AVAILABLE
MELTING POINT: 217 DEG. C/ 423 DEG. F
MELTING POINT / FREEZING POINT: NOT APPLICABLE
ODOUR: NOT APPLICABLE
ODOUR TRESHOLD: NOT APPLICABLE
OXIDISING PROPERTIES: NOT APPLICABLE
PARTITION COEFFICIENT:
N-OCTANOL / WATER: NOT APPLICABLE
PH VALUE: NOT APPLICABLE
RELATIVE DENSITY: 7.1 G/CM3
SOLUBILITY: NO DATA AVAILABLE
UPPER / LOWER FLAMMABILITY OR EXPLOSIVE LIMITS: NOT APPLICABLE
VAPOUR DENSITY: NOT APPLICABLE
VAPOUR PRESSURE: NOT APPLICABLE
VISCOSITY: NOT APPLICABLE
VOLATILITY: NOT APPLICABLE
9.2. OTHER INFORMATION: NOT APPLICABLE
| SECTION 10: STABILITY AND REACTIVITY | |
10.1. REACTIVITY:
REACTIVITY:
CONTACT WITH CHEMICAL SUBSTANCES LIKE ACIDS OR STRONG BASES COULD CAUSE
GENERATION OF GAS.
10.2. CHEMICAL STABILITY:
CHEMICAL STABILITY: THIS PRODUCT IS STABLE UNDER NORMAL CONDITIONS.
10.3. POSSIBILITY OF HAZARDOUS REACTIONS:
POSSIBILITY OF HAZARDOUS REACTIONS: NOT APPLICABLE
10.4. CONDITIONS TO AVOID:
CONDITIONS TO AVOID:
THIS PRODUCT IS ONLY INTENDED FOR NORMAL SOLDERING PURPOSES.
10.5. INCOMPATIBLE MATERIALS:
INCOMPATIBLE MATERIALS: NOT APPLICABLE
10.6. HAZARDOUS DECOMPOSITION PRODUCTS:
HAZARDOUS DECOMPOSITION PRODUCTS:
WHEN THIS PRODUCT IS USED IN A SOLDERING PROCESS, HAZARDOUS DECOMPOSITION
PRODUCTS WOULD INCLUDE THOSE FROM THE VOLATILIZATION, REACTION, OR
OXIDATION OF THE MATERIALS LISTED IN SECTION 3, AND THOSE FROM THE BASE
METAL AND COATING.
FUMES FROM THIS PRODUCT MAY CONTAIN COMPOUNDS OF THE FOLLOWING CHEMICAL
ELEMENTS:
Ag, Sn, AND NITROGEN OXIDE. THE REST IS NOT ANALYZED, ACCORDING
TO AVAILABLE STANDARDS.
OTHER:
REFER TO APPLICABLE NATIONAL EXPOSURE LIMITS FOR FUME COMPOUNDS, INCLUDING
THOSE EXPOSURE LIMITS FOR FUME COMPOUNDS FOUND IN SECTION 8.
A SIGNIFICANT AMOUNT OF THE CHROMIUM IN THE FUMES CAN BE HEXAVALENT
CHROMIUM, WHICH HAS A VERY LOW EXPOSURE LIMIT IN SOME COUNTRIES.
MANGANESE AND NICKEL HAVE LOW EXPOSURE LIMITS, IN SOME COUNTRIES,
THAT MAY BE EASILY EXCEEDED.
REASONABLY EXPECTED GASEOUS PRODUCTS WOULD INCLUDE CARBON OXIDES,
NITROGEN OXIDES AND OZONE. AIR CONTAMINANTS AROUND THE SOLDERING
AREA CAN BE AFFECTED BY THE SOLDERING PROCESS AND INFLUENCE THE
COMPOSITION AND QUANTITY OF FUMES AND GASES PRODUCED.
| SECTION 11: TOXICOLOGICAL INFORMATION | |
11.1. INFORMATION ON TOXICOLOGICAL EFFECTS:
INFORMATION ON TOXICOLOGICAL EFFECTS:
INHALATION OF WELDING FUMES AND GASES CAN BE DANGEROUS TO YOUR HEALTH.
CLASSIFICATION OF WELDING FUMES IS DIFFICULT BECAUSE OF VARYING BASE
MATERIALS, COATINGS, AIR CONTAMINATION AND PROCESSES. THE INTERNATIONAL
AGENCY FOR RESEARCH ON CANCER HAS CLASSIFIED WELDING FUMES AS POSSIBLY
CARCINOGENIC TO HUMANS (GROUP 2B).
ACUTE TOXICITY:
OVEREXPOSURE TO WELDING FUMES MAY RESULT IN SYMPTOMS LIKE METAL FUME FEVER,
DIZZINESS, NAUSEA, DRYNESS OR IRRITATION OF THE NOSE, THROAT OR EYES.
SKIN CORROSION/IRRITATION: NO DATA AVAILABLE
SERIOUS EYE DAMAGE/IRRITATION: NO DATA AVAILABLE
RESPIRATORY/SKIN SENSITIZATION: NO DATA AVAILABLE
GERM CELL MUTAGENICITY: NO DATA AVAILABLE
GENOTOXICITY: NO DATA AVAILABLE
CARCINOGENICITY: NO DATA AVAILABLE
REPEATED DOSE TOXICITY: NO DATA AVAILABLE
REPRODUCTIVE TOXICITY: NO DATA AVAILABLE
STOT-SINGLE EXPOSURE: NO DATA AVAILABLE
STOT-REPEATED EXPOSURE: NO DATA AVAILABLE
ASPIRATION HAZARD: NO DATA AVAILABLE
LD50 ORAL: NO DATA AVAILABLE
LD50 DERMAL: NO DATA AVAILABLE
LC50 INHALATION: NO DATA AVAILABLE
ROUTES OF EXPOSURE: NO DATA AVAILABLE
SYMPTOMS RELATED TO THE PHYSICAL, CHEMICAL AND TOXICOLOGICAL
CHARACTERISTICS:
NO DATA AVAILABLE
MIXTURE VERSUS SUBSTANCE INFORMATION: NO DATA AVAILABLE
DELAYED AND IMMEDIATE EFFECTS AS WELL AS CHRONIC EFFECTS FROM SHORT AND
LONG-TERM EXPOSURE:
NO DATA AVAILABLE
INTERACTIVE EFFECTS: NO DATA AVAILABLE
TOXICITY IN CASE OF SKIN CONTACT: NO DATA AVAILABLE
ABSENCE OF SPECIFIC DATA: NO DATA AVAILABLE
TOXICITY IN CASE OF EYE CONTACT: NO DATA AVAILABLE
MIXTURES: NO DATA AVAILABLE
TOXICITY IN CASE OF INGESTION: NO DATA AVAILABLE
OTHER:
ACUTE EFFECTS: NO DATA AVAILABLE
LONG TERM EFFECT:
CHRONIC TOXICITY:
OVEREXPOSURE TO WELDING FUMES MAY AFFECT PULMONARY FUNCTION.
INFORMATION TO DOCTOR: NO DATA AVAILABLE
| SECTION 12: ECOLOGICAL INFORMATION | |
12.1. TOXICITY:
ACUTE TOXICITY: NO DATA AVAILABLE
TOXICITY: NO DATA AVAILABLE
AQUATIC: NO DATA AVAILABLE
SOIL: NO DATA AVAILABLE
ACUTE FISH TOXICITY: NO DATA AVAILABLE
ACUTE ALGAE TOXICITY: NO DATA AVAILABLE
ACUTE CRUSTACEAN TOXICITY: NO DATA AVAILABLE
CHRONICAL TOXICITY: NO DATA AVAILABLE
12.2. PERSISTENCE AND DEGRADABILITY:
PERSISTENCE AND DEGRADABILITY: NO DATA AVAILABLE
DECAY/TRANSFORMATION: NO DATA AVAILABLE
12.3. BIOACCUMULATIVE POTENTIAL:
BIOACCUMULATIVE POTENTIAL: NO DATA AVAILABLE
12.4. MOBILITY IN SOIL:
MOBILITY: NO DATA AVAILABLE
12.5. RESULTS OF PBT AND VPVB ASSESSMENT:
RESULTS OF PBT AND VPVB ASSESSMENT: NO DATA AVAILABLE
12.6. OTHER ADVERSE EFFECTS:
OTHER ADVERSE EFFECTS: NO DATA AVAILABLE
OTHER:
WELDING CONSUMABLES AND MATERIALS COULD DEGRADE/WEATHER INTO COMPONENTS
ORIGINATING FROM THE CONSUMABLES OR FROM THE MATERIALS USED IN THE
WELDING PROCESS. AVOID EXPOSURE TO CONDITIONS THAT COULD LEAD TO
ACCUMULATION IN SOILS OR GROUNDWATER.
| SECTION 13: DISPOSAL CONSIDERATIONS | |
13.1. WASTE TREATMENT METHODS:
DISPOSAL CONSIDERATIONS:
DISCARD ANY PRODUCT, RESIDUE, DISPOSABLE CONTAINER OR LINER IN AN
ENVIRONMENTALLY ACCEPTABLE MANNER, IN FULL COMPLIANCE WITH FEDERAL
AND LOCAL REGULATIONS. USE RECYCLING PROCEDURES IF AVAILABLE.
USA RCRA:
UNUSED PRODUCT OR PRODUCT RESIDUE CONTAINING SILVER IS CONSIDERED
HAZARDOUS WASTE IF DISCARDED, RCRA ID CHARACTERISTIC TOXIC HAZARDOUS
WASTE D011.
(HTTPS://RCRAINFO.EPA.GOV/RCRAINFOWEB/ACTION/MODULES/MAIN/GLOSSARY/WASTE;
JSESSIONID=A98F2456754BC0CE970C52F4E3AA429F) RESIDUES FROM SOLDERING
CONSUMABLES AND PROCESSES COULD DEGRADE AND ACCUMULATE IN SOILS AND
GROUNDWATER.
| SECTION 14: TRANSPORT INFORMATION | |
14.1. UN NUMBER: NOT APPLICABLE
14.2. UN PROPER SHIPPING NAME: NOT APPLICABLE
14.3. TRANSPORT HAZARD CLASS(ES): NOT APPLICABLE
14.4. PACKING GROUP: NOT APPLICABLE
14.5. ENVIRONMENTAL HAZARDS: NOT APPLICABLE
14.6. SPECIAL PRECAUTIONS FOR USER: NOT APPLICABLE
14.7. TRANSPORT IN BULK ACCORDING TO ANNEX II OF MARPOL AND THE IBC CODE:
NOT APPLICABLE
| SECTION 15: REGULATORY INFORMATION | |
15.1 SAFETY, HEALTH AND ENVIRONMENTAL REGULATIONS/LEGISLATION SPECIFIC
FOR THE SUBSTANCE OR MIXTURE:
EU REGULATIONS:
REGULATION (EC) NO 1907/2006 OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL
OF 18 DECEMBER 2006 CONCERNING THE REGISTRATION, EVALUATION, AUTHORISATION
AND RESTRICTION OF CHEMICALS (REACH), ESTABLISHING A EUROPEAN CHEMICALS
AGENCY, AMENDING DIRECTIVE 1999/45/EC AND REPEALING COUNCIL REGULATION
(EEC) NO 793/93 AND COMMISSION REGULATION (EC) NO 1488/94 AS WELL AS
COUNCIL DIRECTIVE 76/769/EEC AND COMMISSION DIRECTIVES 91/155/EEC,
93/67/EEC, 93/105/EC AND 2000/21/EC.
REGULATION (EC) NO 1272/2008 OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL
OF 16 DECEMBER 2008 ON CLASSIFICATION, LABELLING AND PACKAGING OF
SUBSTANCES AND MIXTURES, AMENDING AND REPEALING DIRECTIVES 67/548/EEC AND
1999/45/EC, AND AMENDING REGULATION (EC) NO 1907/2006
COMMISSION REGULATION (EU) 2015/830 OF 28 MAY 2015 AMENDING REGULATION
(EC) NO 1907/2006 OF THE EUROPEAN PARLIAMENT AND THE COUNCIL CONCERNING
THE REGISTRATION, EVALUATION, AUTHORISATION AND RESTRICTION OF CHEMICALS
(REACH)
DIRECTIVE 2008/98/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL.
OF 19 NOVEMBER 2008. ON WASTE AND REPEALING CERTAIN DIRECTIVES.
EUROPEAN PARLIAMENT AND COUNCIL DIRECTIVE 94/62/EC OF 20 DECEMBER 1994
ON PACKAGING AND PACKAGING WASTE.
OTHER REGULATIONS, LIMITATIONS AND LEGAL REGULATIONS:
POLAND REGULATIONS:
ACT OF 25 FEBRUARY 2011 ON THE CHEMICAL SUBSTANCES AND THEIR
MIXTURES(OJ # 63, POZ. 322).
REGULATION OF THE MINISTER OF LABOUR AND SOCIAL POLICY OF 6 JUNE 2014
ON MAXIMUM PERMISSIBLE CONCENTRATION AND INTENSITY OF AGENTS HARMFUL
TO HEALTH IN THE WORKING ENVIRONMENT (DZ. U. Z. 2014, POZ 817).
THE ACT ON WASTE OF 14 DECEMBER 2012, JOURNAL OF LAWS OF 2013,
ITEM 21 WITH AMENDMENTS
ACT OF 13TH JUNE 2013 ON PACKAGING MANAGEMENT AND PACKAGING WASTE
(JOURNAL OF LAWS OF 2013, ITEM 888).
REGULATION OF THE MINISTER OF THE ENVIRONMENT OF 9 DECEMBER 2014 ON WASTE
CATALOGUE (JOURNAL OF LAWS OF 2014, ITEM 1923).
REGULATION OF THE MINISTER OF ECONOMY OF 21 DECEMBER 2005. CONCERNING
ESSENTIAL REQUIREMENTS FOR PERSONAL PROTECTIVE EQUIPMENT (JOURNAL.
LAWS NO. 259, ITEM. 2173).
REGULATION OF THE MINISTER OF HEALTH OF 2 FEBRUARY 2011 ON TESTS AND
MEASUREMENTS OF FACTORS HARMFUL TO HEALTH IN THE WORKING ENVIRONMENT
(THE JOURNAL OF LAWS 2011, NO. 33, ITEM 166).
USA REGULATIONS:
USA:
THIS PRODUCT CONTAINS OR PRODUCES A CHEMICAL KNOWN TO THE STATE OF
CALIFORNIA TO CAUSE CANCER AND BIRTH DEFECTS (OR OTHER REPRODUCTIVE
HARM). (CALIFORNIA HEALTH & SAFETY CODE SUBSECTION 25249.5 ET SEQ.)
CERCLA/SARA TITLE III REPORTABLE QUANTITIES (RQS) AND/OR THRESHOLD PLANNING
QUANTITIES (TPQS):
PRODUCT IS A SOLID SOLUTION IN THE FORM OF A SOLID ARTICLE. SPILLS OR
RELEASES RESULTING IN THE LOSS OF ANY INGREDIENT AT OR ABOVE ITS RQ
REQUIRE IMMEDIATE NOTIFICATION TO THE NATIONAL RESPONSE CENTER AND TO
YOUR LOCAL EMERGENCY PLANNING COMMITTEE.
EPCRA/SARA TITLE III 313 TOXIC CHEMICALS:
THE FOLLOWING METALLIC COMPONENTS ARE LISTED AS SARA 313 "TOXIC CHEMICALS"
AND POTENTIAL SUBJECT TO ANNUAL SARA 313 REPORTING. SEE SECTION 3 FOR
WEIGHT PERCENT.
SILVER: 1.0% DE MINIMIS CONCENTRATION
INTERNATIONAL INVENTORIES:
AUSTRALIA:
THE SUBSTANCE(S) IN THIS PRODUCT IS/ARE IN COMPLIANCE WITH THE INVENTORY
REQUIREMENTS OF AUSTRALIAN INVENTORY OF CHEMICAL SUBSTANCES (AICS)
UNITED STATES EPA TOXIC SUBSTANCE CONTROL ACT:
ALL CONSTITUENTS OF THIS PRODUCT ARE ON THE TSCA INVENTORY LIST OR ARE
EXCLUDED FROM LISTING.
CANADIAN ENVIRONMENTAL PROTECTION ACT (CEPA):
ALL CONSTITUENT(S) OF THIS PRODUCT IS/ARE ON THE DOMESTIC SUBSTANCE
LIST (DSL).
15.2. CHEMICAL SAFETY ASSESSMENT:
CHEMICAL SAFETY ASSESSMENT: NO DATA AVAILABLE
OTHER:
READ AND UNDERSTAND THE MANUFACTURER'S INSTRUCTIONS, YOUR EMPLOYER'S SAFETY
PRACTICES AND THE HEALTH AND SAFETY INSTRUCTIONS ON THE LABEL. OBSERVE ANY
FEDERAL AND LOCAL REGULATIONS. TAKE PRECAUTIONS WHEN WELDING AND PROTECT
YOURSELF AND OTHERS.
WARNING:
WELDING FUMES AND GASES ARE HAZARDOUS TO YOUR HEALTH AND MAY DAMAGE LUNGS
AND OTHER ORGANS. USE ADEQUATE VENTILATION. ELECTRIC SHOCK CAN KILL. ARC
RAYS AND SPARKS CAN INJURE EYES AND BURN SKIN.
WEAR CORRECT HAND, HEAD, EYE AND BODY PROTECTION.
| SECTION 16: OTHER INFORMATION | |
CHANGES TO PREVIOUS REVISION:
THIS SAFETY DATA SHEET HAS BEEN REVISED DUE TO MODIFICATIONS TO
SECTIONS 1-16.
REFERENCES TO KEY LITERATURE AND DATA SOURCES:
REFER TO ESAB "WELDING AND CUTTING - RISKS AND MEASURES", F52-529
"PRECAUTIONS AND SAFE PRACTICES FOR ELECTRIC WELDING AND CUTTING" AND
F2035 "PRECAUTIONS AND SAFE PRACTICES FOR GAS WELDING, CUTTING AND
HEATING" AVAILABLE FROM ESAB, AND TO: WWW.ESAB.COM
OTHER:
ADDITIONAL INFORMATION:
USA:
CONTACT ESAB AT WWW.ESABNA.COM OR 1-800 ESAB-123 IF YOU HAVE ANY QUESTIONS
ABOUT THIS SDS. AMERICAN NATIONAL STANDARD Z49.1 SAFETY IN WELDING AND
CUTTING, ANSI/AWS F1.5 METHODS FOR SAMPLING AND ANALYZING GASES FROM
WELDING AND ALLIED PROCESSES, ANSI/AWS F1.1 "METHOD FOR SAMPLING AIRBORNE
PARTICLES GENERATED BY WELDING AND ALLIED PROCESSES", AWSF3.2M/F3.2
"VENTILATION GUIDE FOR WELD FUME", 550 NORTH LE JEUNE ROAD, MIAMI FLORIDA
33135. SAFETY AND HEALTH FACT SHEETS AVAILABLE FROM AWS AT WWW.AWS.ORG.
OSHA PUBLICATION 2206 (29 C.F.R. 1910), U.S. GOVERNMENT PRINTING OFFICE,
SUPERINTENDENT OF DOCUMENTS, P.O. BOX 371954, PITTSBURGH, PA 15250-7954
AMERICAN CONFERENCE OF GOVERNMENTAL HYGIENISTS (ACGIH), THRESHOLD LIMIT
VALUES AND BIOLOGICAL EXPOSURE INDICES, 6500 GLENWAY AVE., CINCINNATI,
OHIO 45211, USA.
NFPA 51B "STANDARD FOR FIRE PREVENTION DURING WELDING, CUTTING AND OTHER
HOT WORK" PUBLISHED BY THE NATIONAL FIRE PROTECTION ASSOCIATION, 1
BATTERYMARCH PARK, QUINCY, MA 02169
UK:
WMA PUBLICATION 236 AND 237, "HAZARDS FROM WELDING FUME", "THE ARC WELDER
AT WORK, SOME GENERAL ASPECTS OF HEALTH AND SAFETY".
GERMANY:
ACCIDENT PREVENTION REGULATION BGV D1, "WELDING, CUTTING AND RELATED
PROCEDURES"
CANADA:
CSA STANDARD CAN/CSA-W117.2-01 "SAFETY IN WELDING, CUTTING, AND ALLIED
PROCESSES".
THIS PRODUCT HAS BEEN CLASSIFIED ACCORDING TO THE HAZARD CRITERIA OF THE
CPR AND THE SDS CONTAINS ALL OF THE INFORMATION REQUIRED BY THE CPR.
ESAB REQUESTS THE USERS OF THIS PRODUCT TO STUDY THIS SAFETY DATA SHEET
(SDS) AND BECOME AWARE OF PRODUCT HAZARDS AND SAFETY INFORMATION. TO
PROMOTE SAFE USE OF THIS PRODUCT A USER SHOULD:
NOTIFY ITS EMPLOYEES, AGENTS AND CONTRACTORS OF THE INFORMATION ON THIS
SDS AND ANY PRODUCT HAZARDS/SAFETY INFORMATION.FURNISH THIS SAME
INFORMATION TO EACH OF ITS CUSTOMERS FOR THE PRODUCTS
REQUEST SUCH CUSTOMERS TO NOTIFY EMPLOYEES AND CUSTOMERS FOR THE SAME
PRODUCT HAZARDS AND SAFETY INFORMATION.
THE INFORMATION HEREIN IS GIVEN IN GOOD FAITH AND BASED ON TECHNICAL DATA
THAT ESAB BELIEVES TO BE RELIABLE. SINCE THE CONDITIONS OF USE IS OUTSIDE
OUR CONTROL, WE ASSUME NO LIABILITY IN CONNECTION WITH ANY USE OF THIS
INFORMATION AND NO WARRANTY EXPRESSED OR IMPLIED IS GIVEN. CONTACT ESAB
FOR MORE INFORMATION.