| Common Name: | ROTAIR |
| Manufacturer: | INTERNATIONAL COMPRESSOR DISTRIBUTION BELGIUM |
| SDS Revision Date: | 6/8/2015 |
| SDS Format: | GHS-US |
| Item Number(s): | 40JE91 |
| Manufacturer Model Number(s): |
SDS Table of Contents
Click the desired link below to jump directly to that section in the SDS.
CP
CHICAGO PNEUMATIC
SAFETY DATA SHEET
ISSUE DATE: 08-JUN-2015
REVISION DATE: N/A
VERSION: 1
| 1. IDENTIFICATION |  |
PRODUCT IDENTIFIER:
PRODUCT NAME: ROTAIR
OTHER MEANS OF IDENTIFICATION:
SDS #: ROTAIR 001
RECOMMENDED USE OF THE CHEMICAL AND RESTRICTIONS ON USE:
RECOMMENDED USE: COMPRESSOR OIL
DETAILS OF THE SUPPLIER OF THE SAFETY DATA SHEET:
SUPPLIER ADDRESS:
ICD (INTERNATIONAL COMPRESSOR DISTRIBUTION) N.V.
BOOMSESTEENWEG 957
2610 WILRIJK, BELGIUM
EMERGENCY TELEPHONE NUMBER:
COMPANY PHONE NUMBER: +32 3 870 2111
EMERGENCY TELEPHONE (24 HR):
CHEMTREC:
1-800-424-9300 (NORTH AMERICA)
1-703-527-3887 (INTERNATIONAL)
| 2. HAZARDS IDENTIFICATION | |
APPEARANCE: AMBER LIQUID
PHYSICAL STATE: LIQUID
ODOR: SLIGHT HYDROCARBON
CLASSIFICATION:
THIS CHEMICAL DOES NOT MEET THE HAZARDOUS CRITERIA SET FORTH BY THE 2012
OSHA HAZARD COMMUNICATION STANDARD (29 CFR 1910.1200). HOWEVER, THIS SAFETY
DATA SHEET (SDS) CONTAINS VALUABLE INFORMATION CRITICAL TO THE SAFE
HANDLING AND PROPER USE OF THIS PRODUCT. THIS SDS SHOULD BE RETAINED AND
AVAILABLE FOR EMPLOYEES AND OTHER USERS OF THIS PRODUCT.
| 3. COMPOSITION/INFORMATION ON INGREDIENTS | |
CHEMICAL NAME CAS NO WEIGHT-%
HIGHLY REFINED MINERAL OIL (DMSO - EXTRACT ** **
<3% IP346)
IF CHEMICAL NAME/CAS NO IS "PROPRIETARY" AND/OR WEIGHT-% IS LISTED AS A
RANGE, THE SPECIFIC CHEMICAL IDENTITY AND/OR PERCENTAGE OF COMPOSITION HAS
BEEN WITHHELD AS A TRADE SECRET.
| 4. FIRST-AID MEASURES | |
FIRST AID MEASURES:
EYE CONTACT:
FLUSH EYES WITH LARGE AMOUNTS OF WATER. IF IRRITATION PERSISTS GET MEDICAL
ATTENTION.
SKIN CONTACT:
REMOVE CONTAMINATED CLOTHING. FLUSH EXPOSED AREA WITH WATER AND FOLLOW BY
WASHING WITH SOAP IF AVAILABLE. IF PERSISTENT IRRITATION OCCURS, OBTAIN
MEDICAL ATTENTION.
INHALATION:
NO TREATMENT NECESSARY UNDER NORMAL CONDITIONS OF USE. IF SYMPTOMS PERSIST,
OBTAIN MEDICAL ADVICE.
INGESTION:
IN GENERAL NO TREATMENT IS NECESSARY UNLESS LARGE QUANTITIES ARE SWALLOWED,
HOWEVER, GET MEDICAL ADVICE.
MOST IMPORTANT SYMPTOMS AND EFFECTS:
SYMPTOMS:
EXPECTED TO BE A MINOR EYE IRRITANT. OIL ACNE/FOLLICULITIS SIGNS AND
SYMPTOMS MAY INCLUDE FORMATION OF BLACK PUSTULES AND SPOTS ON THE SKIN OF
EXPOSED AREAS. INGESTION MAY RESULT IN NAUSEA, VOMITING AND/OR DIARRHEA.
INDICATION OF ANY IMMEDIATE MEDICAL ATTENTION AND SPECIAL TREATMENT NEEDED:
NOTES TO PHYSICIAN: TREAT SYMPTOMATICALLY.
| 5. FIRE-FIGHTING MEASURES | |
SUITABLE EXTINGUISHING MEDIA:
FOAM, WATER SPRAY OR FOG. DRY CHEMICAL POWDER, CARBON DIOXIDE, SAND OR
EARTH MAY BE USED FOR SMALL FIRES ONLY.
UNSUITABLE EXTINGUISHING MEDIA: DO NOT USE WATER IN A JET.
SPECIFIC HAZARDS ARISING FROM THE CHEMICAL:
HAZARDOUS COMBUSTION PRODUCTS:
A COMPLEX MIXTURE OF AIRBORNE SOLID AND LIQUID PARTICULATES AND GASES
(SMOKE). CARBON MONOXIDE MAY BE EVOLVED IF INCOMPLETE COMBUSTION OCCURS.
UNIDENTIFIED ORGANIC AND INORGANIC COMPOUNDS.
PROTECTIVE EQUIPMENT AND PRECAUTIONS FOR FIREFIGHTERS:
PROPER PROTECTIVE EQUIPMENT INCLUDING BREATHING APPARATUS MUST BE WORN WHEN
APPROACHING A FIRE IN A CONFINED SPACE.
| 6. ACCIDENTAL RELEASE MEASURES | |
PERSONAL PRECAUTIONS, PROTECTIVE EQUIPMENT AND EMERGENCY PROCEDURES:
PERSONAL PRECAUTIONS:
AVOID CONTACT WITH SKIN AND EYES. USE APPROPRIATE CONTAINMENT TO AVOID
ENVIRONMENTAL CONTAMINATION.
METHODS AND MATERIAL FOR CONTAINMENT AND CLEANING UP:
METHODS FOR CONTAINMENT:
PREVENT FROM SPREADING OR ENTERING DRAINS, DITCHES OR RIVERS BY USING SAND,
EARTH, OR OTHER APPROPRIATE BARRIERS.
METHODS FOR CLEAN-UP:
SLIPPERY WHEN SPILT. AVOID ACCIDENTS, CLEAN UP IMMEDIATELY. PREVENT FROM
SPREADING BY MAKING A BARRIER WITH SAND, EARTH OR OTHER CONTAINMENT
MATERIAL. RECLAIM LIQUID DIRECTLY OR IN AN ABSORBENT. SOAK UP RESIDUE WITH
AN ABSORBENT SUCH AS CLAY, SAND OR OTHER SUITABLE MATERIAL AND DISPOSE OF
PROPERLY.
| 7. HANDLING AND STORAGE | |
PRECAUTIONS FOR SAFE HANDLING:
ADVICE ON SAFE HANDLING:
AVOID PROLONGED OR REPEATED CONTACT WITH SKIN. AVOID INHALING VAPOR AND/OR
MISTS. WHEN HANDLING PRODUCTS IN DRUMS, SAFETY FOOT WEAR SHOULD BE WORN AND
PROPER HANDLING EQUIPMENT SHOULD BE USED. PROPERLY DISPOSE OF ANY
CONTAMINATED RAGS OR CLEANING MATERIALS IN ORDER TO PREVENT FIRES.
CONDITIONS FOR SAFE STORAGE, INCLUDING ANY INCOMPATIBILITIES:
STORAGE CONDITIONS:
KEEP CONTAINER TIGHTLY CLOSED AND IN A COOL, WELL-VENTILATED PLACE. USE
PROPERLY LABELED AND CLOSABLE CONTAINERS. STORE AT AMBIENT TEMPERATURE.
FOR CONTAINERS OR CONTAINER LININGS, USE MILD STEEL OR HIGH DENSITY
POLYETHYLENE.
INCOMPATIBLE MATERIALS: PVC.
| 8. EXPOSURE CONTROLS/PERSONAL PROTECTION | |
EXPOSURE GUIDELINES:
CHEMICAL NAME ACGIH TLV OSHA PEL NIOSH IDLH
HIGHLY REFINED MINERAL TWA: PEL: NONE ESTABLISHED
OIL (DMSO - EXTRACT <3% 5 MG/M3 5 MG/M3 (MIST.)
IP 346), OIL MIST (INHALEABLE
FRACTION)
APPROPRIATE ENGINEERING CONTROLS:
ENGINEERING CONTROLS:
ADEQUATE VENTILATION TO CONTROL AIRBORNE CONCENTRATIONS. WHERE MATERIAL IS
HEATED, SPRAYED OR MIST FORMED, THERE IS GREATER POTENTIAL FOR AIRBORNE
CONCENTRATIONS TO BE GENERATED. IF ENGINEERING CONTROLS DO NOT MAINTAIN
AIRBORNE CONCENTRATIONS TO A LEVEL WHICH IS ADEQUATE TO PROTECT WORKER
HEALTH, SELECT RESPIRATORY PROTECTION EQUIPMENT SUITABLE FOR THE SPECIFIC
CONDITIONS OF USE AND MEETING RELEVANT LEGISLATION.
MONITORING OF THE CONCENTRATION OF SUBSTANCES IN THE BREATHING ZONE OF
WORKERS OR IN THE GENERAL WORKPLACE MAY BE REQUIRED TO CONFIRM COMPLIANCE
WITH AN OEL AND ADEQUACY OF EXPOSURE CONTROLS. FOR SOME SUBSTANCES
BIOLOGICAL MONITORING MAY ALSO BE APPROPRIATE. VALIDATED EXPOSURE
MEASUREMENT METHODS SHOULD BE APPLIED BY A COMPETENT PERSON AND SAMPLES
ANALYZED BY AN ACCREDITED LABORATORY. EXAMPLES OF SOURCES OF RECOMMENDED
EXPOSURE MEASUREMENT METHODS ARE GIVEN BELOW OR CONTACT THE SUPPLIER.
FURTHER NATIONAL METHODS MAY BE AVAILABLE.
INDIVIDUAL PROTECTION MEASURES, SUCH AS PERSONAL PROTECTIVE EQUIPMENT:
EYE/FACE PROTECTION:
WEAR SAFETY GLASSES OR FULL FACE SHIELD IF SPLASHES ARE LIKELY TO OCCUR.
SKIN AND BODY PROTECTION:
SKIN PROTECTION NOT ORDINARILY REQUIRED BEYOND STANDARD ISSUE WORK CLOTHES.
WHERE HAND CONTACT WITH THE PRODUCT MAY OCCUR THE USE OF GLOVES APPROVED TO
RELEVANT STANDARDS (E.G. EUROPE: EN374, US: F739) MADE FROM THE FOLLOWING
MATERIALS MAY PROVIDE SUITABLE CHEMICAL PROTECTION:
PVC, NEOPRENE OR NITRILE RUBBER GLOVES. SUITABILITY AND DURABILITY OF A
GLOVE IS DEPENDENT ON USAGE, E.G. FREQUENCY AND DURATION OF CONTACT,
CHEMICAL RESISTANCE OF GLOVE MATERIAL, DEXTERITY. ALWAYS SEEK ADVICE FROM
GLOVE SUPPLIERS. CONTAMINATED GLOVES SHOULD BE REPLACED. PERSONAL HYGIENE
IS A KEY ELEMENT OF EFFECTIVE HAND CARE. GLOVES MUST ONLY BE WORN ON CLEAN
HANDS. AFTER USING GLOVES, HANDS SHOULD BE WASHED AND DRIED THOROUGHLY.
APPLICATION OF A NON-PERFUMED MOISTURIZER IS RECOMMENDED. FOR CONTINUOUS
CONTACT WE RECOMMEND GLOVES WITH BREAKTHROUGH TIME OF MORE THAN 240 MINUTES
WITH PREFERENCE FOR >480 MINUTES WHERE SUITABLE GLOVES CAN BE IDENTIFIED.
FOR SHORT-TERM/SPLASH PROTECTION WE RECOMMEND THE SAME, BUT RECOGNIZE THAT
SUITABLE GLOVES OFFERING THIS LEVEL OF PROTECTION MAY NOT BE AVAILABLE AND
IN THIS CASE A LOWER BREAKTHROUGH TIME MAY BE ACCEPTABLE SO LONG AS
APPROPRIATE MAINTENANCE AND REPLACEMENT REGIMES ARE FOLLOWED. GLOVE
THICKNESS IS NOT A GOOD PREDICTOR OF GLOVE RESISTANCE TO A CHEMICAL AS IT
IS DEPENDENT ON THE EXACT COMPOSITION OF THE GLOVE MATERIAL.
RESPIRATORY PROTECTION:
NO RESPIRATORY PROTECTION IS ORDINARILY REQUIRED UNDER NORMAL CONDITIONS OF
USE. WHERE AIR-FILTERING RESPIRATORS ARE SUITABLE, SELECT AN APPROPRIATE
COMBINATION OF MASK AND FILTER. SELECT A FILTER SUITABLE FOR COMBINED
PARTICULATE/ORGANIC GASES AND VAPORS [BOILING POINT >65 DEG. C
(149 DEG. F)].
GENERAL HYGIENE CONSIDERATIONS:
IN ACCORDANCE WITH GOOD INDUSTRIAL HYGIENE PRACTICES, PRECAUTIONS SHOULD BE
TAKEN TO AVOID BREATHING OF MATERIAL. USE GOOD HYGIENE WHEN HANDLING
PETROLEUM PRODUCTS. LAUNDER CONTAMINATED CLOTHING BEFORE REUSE.
| 9. PHYSICAL AND CHEMICAL PROPERTIES | |
INFORMATION ON BASIC PHYSICAL AND CHEMICAL PROPERTIES:
PHYSICAL STATE: LIQUID
APPEARANCE: AMBER, LIQUID
ODOR: SLIGHT HYDROCARBON
COLOR: AMBER
ODOR THRESHOLD: NOT DETERMINED
PROPERTY VALUES REMARKS - METHOD
PH NOT APPLICABLE
MELTING POINT/FREEZING POINT NOT AVAILABLE
BOILING POINT/BOILING RANGE >280 DEG. C / 536 DEG. F
FLASH POINT 210 DEG. C / 410 DEG. F ASTM D-92
EVAPORATION RATE NOT AVAILABLE
FLAMMABILITY (SOLID, GAS) LIQUID-NOT APPLICABLE)
UPPER FLAMMABILITY LIMITS 1-10% (V) (BASED ON
MINERAL OIL)
LOWER FLAMMABILITY LIMIT 1-10% (V) (BASED ON
MINERAL OIL)
VAPOR PRESSURE <0.5 PA AT 20 DEG. C /
68 DEG. F
VAPOR DENSITY >1 (AIR=1)
SPECIFIC GRAVITY 0.874 AT 15 DEG. C /
59 DEG. F
WATER SOLUBILITY NEGLIGIBLE
SOLUBILITY IN OTHER SOLVENTS NOT DETERMINED
PARTITION COEFFICIENT >6
PROPERTY VALUES REMARKS - METHOD
AUTO-IGNITION TEMPERATURE >320 DEG. C / 608 DEG. F
DECOMPOSITION TEMPERATURE NOT DETERMINED
KINEMATIC VISCOSITY 46 MM2/S AT 40 DEG. C /
104 DEG. F
DYNAMIC VISCOSITY NOT DETERMINED
EXPLOSIVE PROPERTIES NOT DETERMINED
OXIDIZING PROPERTIES NOT DETERMINED
| 10. STABILITY AND REACTIVITY | |
REACTIVITY: NOT REACTIVE UNDER NORMAL CONDITIONS
CHEMICAL STABILITY: STABLE UNDER RECOMMENDED STORAGE CONDITIONS.
POSSIBILITY OF HAZARDOUS REACTIONS: NONE UNDER NORMAL PROCESSING
HAZARDOUS POLYMERIZATION:
WILL NOT OCCUR UNDER NORMAL CONDITIONS OF STORAGE AND USE.
CONDITIONS TO AVOID: EXTREMES OF TEMPERATURE AND DIRECT SUNLIGHT.
INCOMPATIBLE MATERIALS: STRONG OXIDIZING AGENTS
HAZARDOUS DECOMPOSITION PRODUCTS:
HAZARDOUS DECOMPOSITION PRODUCTS ARE NOT EXPECTED TO FORM DURING NORMAL
STORAGE.
| 11. TOXICOLOGICAL INFORMATION | |
INFORMATION ON LIKELY ROUTES OF EXPOSURE:
PRODUCT INFORMATION:
EYE CONTACT: AVOID CONTACT WITH EYES.
SKIN CONTACT: AVOID CONTACT WITH SKIN.
INHALATION: DO NOT INHALE.
INGESTION: DO NOT INGEST.
COMPONENT INFORMATION:
INFORMATION ON PHYSICAL, CHEMICAL AND TOXICOLOGICAL EFFECTS:
SYMPTOMS: PLEASE SEE SECTION 4 OF THIS SDS FOR SYMPTOMS.
DELAYED AND IMMEDIATE EFFECTS AS WELL AS CHRONIC EFFECTS FROM SHORT AND
LONG-TERM EXPOSURE:
CARCINOGENICITY:
NOT EXPECTED TO BE CARCINOGENIC. PRODUCT CONTAINS MINERAL OILS OF TYPES
SHOWN TO BE NON-CARCINOGENIC IN ANIMAL SKIN-PAINTING STUDIES. HIGHLY
REFINED MINERAL OILS ARE NOT CLASSIFIED AS CARCINOGENIC BY THE
INTERNATIONAL AGENCY FOR RESEARCH ON CANCER (IARC).
NUMERICAL MEASURES OF TOXICITY: NOT DETERMINED.
| 12. ECOLOGICAL INFORMATION | |
ECOTOXICITY:
ECOTOXICOLOGICAL DATA HAVE NOT BEEN DETERMINED SPECIFICALLY FOR THIS
PRODUCT. INFORMATION GIVEN IS BASED ON KNOWLEDGE OF THE COMPONENTS AND
THE ECOTOXICOLOGY OF SIMILAR PRODUCTS.
COMPONENT INFORMATION:
CHEMICAL NAME ALGAE/AQUATIC FISH TOXICITY TO CRUSTACEA
PLANTS MICROORGANISMS
HIGHLY REFINED LL/EL/IL50:
MINERAL OIL >100 MG/L
(DMSO - EXTRACT
<3% IP 346)
PERSISTENCE/DEGRADABILITY:
EXPECTED TO BE NOT READILY BIODEGRADABLE. MAJOR CONSTITUENTS ARE EXPECTED
TO BE INHERENTLY BIODEGRADABLE, BUT THE PRODUCT CONTAINS COMPONENTS THAT
MAY PERSIST IN THE ENVIRONMENT.
BIOACCUMULATION: CONTAINS COMPONENTS WITH THE POTENTIAL TO BIOACCUMULATE.
MOBILITY:
LIQUID UNDER MOST ENVIRONMENTAL CONDITIONS. IF IT ENTERS SOIL, IT WILL
ADSORB TO SOIL PARTICLES AND WILL NOT BE MOBILE. FLOATS ON WATER.
OTHER ADVERSE EFFECTS: NOT DETERMINED
| 13. DISPOSAL CONSIDERATIONS | |
WASTE TREATMENT METHODS:
DISPOSAL OF WASTES:
RECOVER OR RECYCLE IF POSSIBLE. IT IS THE RESPONSIBILITY OF THE WASTE
GENERATOR TO DETERMINE THE TOXICITY AND PHYSICAL PROPERTIES OF THE MATERIAL
GENERATED TO DETERMINE THE PROPER WASTE CLASSIFICATION AND DISPOSAL METHODS
IN COMPLIANCE WITH APPLICABLE REGULATIONS. DO NOT DISPOSE INTO ENVIRONMENT,
IN DRAINS OR IN WATER COURSES.
CONTAMINATED PACKAGING:
DISPOSAL SHOULD BE IN ACCORDANCE WITH APPLICABLE REGIONAL, NATIONAL AND
LOCAL LAWS AND REGULATIONS.
| 14. TRANSPORT INFORMATION | |
NOTE:
DOT:
IATA:
THIS MATERIAL IS EITHER NOT CLASSIFIED AS DANGEROUS UNDER IATA REGULATIONS
OR NEEDS TO FOLLOW COUNTRY SPECIFIC REQUIREMENTS.
IMDG: THIS MATERIAL IS NOT CLASSIFIED AS DANGEROUS UNDER IMDG REGULATIONS.
| 15. REGULATORY INFORMATION | |
INTERNATIONAL INVENTORIES:
CHEMICAL NAME TSCA DSL NDSL EINECS ELINCS ENCS
HIGHLY REFINED PRESENT PRESENT PRESENT
MINERAL OIL (DNSO -
EXTRACT <3% FP 346)
CHEMICAL NAME IECSC KECL PICCS AICS
HIGHLY REFINED MINERAL
OIL (DNSO - EXTRACT
<3% FP 346)
LEGEND:
TSCA: UNITED STATES TOXIC SUBSTANCES CONTROL ACT SECTION 8(B) INVENTORY
DSL/NDSL: CANADIAN DOMESTIC SUBSTANCES LIST/NON-DOMESTIC SUBSTANCES LIST
EINECS/ELINCS:
EUROPEAN INVENTORY OF EXISTING CHEMICAL SUBSTANCES/EUROPEAN LIST OF
NOTIFIED CHEMICAL SUBSTANCES
ENCS: JAPAN EXISTING AND NEW CHEMICAL SUBSTANCES
IECSC: CHINA INVENTORY OF EXISTING CHEMICAL SUBSTANCES
KECL: KOREAN EXISTING AND EVALUATED CHEMICAL SUBSTANCES
PICCS: PHILIPPINES INVENTORY OF CHEMICALS AND CHEMICAL SUBSTANCES
AICS: AUSTRALIAN INVENTORY OF CHEMICAL SUBSTANCES
US FEDERAL REGULATIONS:
CERCLA:
DEFINED AS AN "OIL" UNDER CERCLA PETROLEUM EXCLUSION THERE FOR RELEASES TO
THE ENVIRONMENT ARE NOT REPORTABLE UNDER CERCLA.
SARA 311/312 HAZARD CATEGORIES: NO SARA 311/312 HAZARDS.
ACUTE HEALTH HAZARD: NO
CHRONIC HEALTH HAZARD: NO
FIRE HAZARD: NO
SUDDEN RELEASE OF PRESSURE HAZARD: NO
REACTIVE HAZARD: NO
SARA 313:
THIS PRODUCT DOES NOT CONTAIN ANY CHEMICALS WHICH ARE SUBJECT TO THE
REPORTING REQUIREMENTS OF THE ACT AND TITLE 40 OF THE CODE OF FEDERAL
REGULATIONS, PART 372.
CWA (CLEAN WATER ACT):
THIS PRODUCT DOES NOT CONTAIN ANY SUBSTANCES REGULATED AS POLLUTANTS
PURSUANT TO THE CLEAN WATER ACT (40 CFR 122.21 AND 40 CFR 122.42)
US STATE REGULATIONS:
CALIFORNIA PROPOSITION 65:
THIS PRODUCT DOES NOT CONTAIN ANY PROPOSITION 65 CHEMICALS.
U.S. STATE RIGHT-TO-KNOW REGULATIONS:
THIS PRODUCT DOES NOT CONTAIN ANY SUBSTANCES REGULATED UNDER APPLICABLE
STATE RIGHT-TO-KNOW REGULATIONS.
| 16. OTHER INFORMATION | |
NFPA:
HEALTH HAZARDS 0
FLAMMABILITY 1
INSTABILITY 0
SPECIAL HAZARDS NOT DETERMINED
HMIS:
HEALTH HAZARDS 1
FLAMMABILITY 1
PHYSICAL HAZARDS 0
PERSONAL PROTECTION NOT DETERMINED
ISSUE DATE: 5-JUN-2015
REVISION DATE: N/A
REVISION NOTE: N/A
DISCLAIMER:
THE INFORMATION CONTAINED HEREIN IS BASED ON OUR CURRENT KNOWLEDGE OF THE
UNDERLYING DATA AND IS INTENDED TO DESCRIBE THE PRODUCT FOR THE PURPOSE OF
HEALTH, SAFETY AND ENVIRONMENTAL REQUIREMENTS ONLY. NO WARRANTY OR
GUARANTEE IS EXPRESSED OR IMPLIED REGARDING THE ACCURACY OF THESE DATA OR
THE RESULTS TO BE OBTAINED FROM THE USE OF THE PRODUCT.
ROTAIR PLUS
REVISION DATE: 8-JUN-2015