| Common Name: | REJUVENATE WOOD REPAIR MARKERS 6 PK |
| Manufacturer: | FOR LIFE PRODUCTS |
| SDS Revision Date: | 4/9/2010 |
| SDS Format: | ANSI-OSHA |
| Item Number(s): | 43Y670 |
| Manufacturer Model Number(s): |
SDS Table of Contents
Click the desired link below to jump directly to that section in the SDS.
P.T.S
PRODUCT TECHNOLOGY SERVICE
MATERIAL SAFETY DATA SHEET
TOUCH UP WOOD REPAIR MARKERS
REVISION: 1
APR. 09, 2010
TS2010032908S1
| 1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION |  |
PRODUCT IDENTIFIER: REJUVENATE WOOD REPAIR MARKERS 6 PK
WHMIS CLASSIFICATION: NOT CONTROLLED UNDER WHMIS
PRODUCT USE: WRITING
MANUFACTURER'S NAME: FOR LIFE PRODUCTS, INC.
STREET ADDRESS: 2301 SW 145 AVENUE
CITY: MIRAMAR
STATE: FLORIDA
POSTAL CODE: 33027
EMERGENCY TELEPHONE: 954-747-3300
SUPPLIER'S NAME: FOR LIFE PRODUCTS, INC.
STREET ADDRESS: 2301 SW 145 AVENUE
CITY: MIRAMAR
STATE: FLORIDA
POSTAL CODE: 33027
EMERGENCY TELEPHONE: 954-747-3300
| 2. COMPOSITION/INFORMATION ON INGREDIENTS | |
HAZARDOUS INGREDIENTS VALUE CAS NO. LD50 OF INGREDIENT LC50 OF
(SPECIFIC) (%) (SPECIFY SPECIES INGREDIENT
AND ROUTE) (SPECIFY
SPECIES)
PLASTIC HOUSING(PP) 80%
PENPOINT(FIBRE) 5%
COTTON CORE(FIBRE) 5%
INK ONE(YELLOW 1) 2% 1342-03-6
INK TWO (RESIN ACIDS, 2% 65997-13-9
ROSIN ACIDS)
INK THREE(ALCOHOL) 6% 64-17-5
| 3. HAZARDS IDENTIFICATION | |
ROUTE OF ENTRY
(X) SKIN CONTACT
(X) SKIN ABSORPTION
(X) EYE CONTACT
(X) INHALATION
( ) INGESTION
EMERGENCY OVERVIEW:
IRRITATING VAPORS TO RESPIRATORY SYSTEM AND EYES MAY FORM WHEN POLYMER IS
PROCESSED AT HIGH TEMPERATURES. MOLTEN OR HEATED MATERIAL IN SKIN CONTACT
CAN CAUSE SEVERE BURNS.
WHMIS SYMBOLS: NOT CONTROLLED UNDER WHMIS
POTENTIAL HEALTH EFFECTS:
EYES:
THIS PRODUCT IS NOT KNOWN TO CAUSE EYE IRRITATION. HOWEVER, AS WITH ANY
CHEMICAL, SOME SENSITIVE INDIVIDUALS MAY EXPERIENCE EYE IRRITATION UPON
CONTACT.
HEATED POLYMER:
EYE CONTACT CAN CAUSE SERIOUS THERMAL BURNS.
VAPORS FORMED WHEN POLYMER IS HEATED MAY BE IRRITATING TO THE EYE.
SKIN:
NO KNOW ACUTE EFFECTS OF THIS PRODUCT RESULTING FROM SKIN CONTACT. HOWEVER,
IN LIGHT OF GOOD INDUSTRIAL HYGIENE, EXPOSURE TO ANY CHEMICAL SHOULD BE
KEPT TO A MINIMUM.
INHALATION:
NEGLIGIBLE HAZARD AT ROOM TEMPERATURE. NUISANCE DUSTS CAN BE IRRITATION TO
THE UPPER RESPIRATORY TRACT. IRRITATION VAPORS MAY FORM WHEN POLYMER IS
PROCESSED AT HIGH TEMPERATURES.
INGESTION: NO EFFECTS ARE EXPECTED FOR INGESTION OF SMALL AMOUNTS.
POTENTIAL CHRONIC HEALTH EFFECTS:
CARCINOGENIC EFFECTS:
CLASSIFIED NONE BY NTP, NONE BY OSHA. NOT CLASSIFICATION FOR HUMAN BY IARC
MUTAGENIC EFFECTS: NOT AVAILABLE.
TERATOGENIC EFFECTS: NOT AVAILABLE
| 4. FIRST AID MEASURES | |
SKIN CONTACT:
POLYMER:
NO KNOW EFFECT ON SKIN CONTACT, RINSE WITH WATER FOR A FEW MINUTES.
HEATED POLYMER:
FOR SERIOUS BURNS FROM HEATED POLYMER, GET MEDICAL ATTENTION.
EYE CONTACT:
RINSE WITH WATER FOR A FEW MINUTES. SEEK MEDICAL ATTENTION IF NECESSARY
INHALATION: ALLOW THE VICTIM TO REST IN A WELL VENTILATED AREA.
INGESTION: GET MEDICAL AID.
| 5. FIRE-FIGHTING MEASURES | |
FLAMMABLE:
(X) YES
( ) NO
IF YES, UNDER WHICH CONDITIONS?: MAY BE COMBUSTIBLE AT HIGH TEMPERATURE.
MEANS OF EXTINCTION:
IN CASE OF FIRE, USE WATER, DRY CHEMICAL, CHEMICAL FOAM, OR
ALCOHOL-RESISTANT FOAM.
FLASHPOINT (DEG. C) AND METHOD: NOT AVAILABLE.
UPPER FLAMMABLE LIMIT (% BY VOLUME): NOT AVAILABLE.
LOWER FLAMMABLE LIMIT (% BY VOLUME): NOT AVAILABLE.
AUTOIGNITION TEMPERATURE (DEG. C): NOT AVAILABLE.
EXPLOSION DATA-SENSITIVITY TO IMPACT: NOT EXPECTED
EXPLOSION DATA-SENSITIVITY TO STATIC DISCHARGE: NOT AVAILABLE.
HAZARDOUS COMBUSTION PRODUCTS:
FIRE MAY PRODUCE IRRITATING GASES AND DENSE SMOKE. FLOWING MATERIAL MAY
PRODUCE STATIC DISCHARGE, IGNITION DUST ACCUMULATIONS.
[NFPA]:
AS IN ANY FIRE, WEAR A SELF-CONTAINED BREATHING APPARATUS IN
PRESSURE-DEMAND, AND FULL PROTECTIVE GEAR.
| 6. ACCIDENTAL RELEASE MEASURES | |
LEAK AND SPILL PROCEDURES:
SMALL SPILL AND LEAK:
PELLETS ON THE FLOOR COULD PRESENT A SERIOUS SLIPPING PROBLEM.
GOOD HOUSEKEEPING MUST BE MAINTAINED AT ALL TIMES TO AVOID THIS HAZARD.
SWEEP, SHOVEL OR VACUUM MATERIAL INTO CLEAN CONTAINERS.
LARGE SPILL AND LEAK:
USE A SHOVEL TO PUT THE MATERIAL INTO A CONVENIENT WASTE DISPOSAL
CONTAINER. DO NOT ALLOW ANY POTENTIALLY CONTAMINATED WATER WITH PELLETS
TO ENTER ANY WATERWAY, SEWER OR DRAIN
| 7. HANDLING AND STORAGE | |
HANDLING PROCEDURES AND EQUIPMENT:
DO NOT EXPOSE TO EXCESSIVE HEAT. HANDLING OF PLASTIC MAY FORM NUISANCE
DUST.
PROTECT PERSONNEL. PNEUMATIC TRANSPORT OF MATERIAL MAY PRODUCE DUST.
USE FILTERS IN PNEUMATIC TRANSPORT LINES TO REDUCE DUST. IF DUSTING IS A
PROBLEM, CARE SHOULD BE TAKEN TO DISSIPATE POTENTIAL STATIC ELECTRICITY
BUILD-UP. NORMAL PRECAUTIONS FOR FINELY DIVIDED POWDERS SHOULD BE MADE.
STORAGE REQUIREMENTS:
KEEP CONTAINER DRY. KEEP IN A COOL PLACE. GROUND ALL EQUIPMENT CONTAINING
MATERIAL. KEEP CONTAINER TIGHTLY CLOSED. KEEP IN A COOL, WELL-VENTILATED
PLACE. COMBUSTIBLE MATERIALS SHOULD BE STORED AWAY FROM EXTREME HEAT AND
AWAY FROM STRONG OXIDIZING AGENTS.
| 8. EXPOSURE CONTROLS / PERSONAL PROTECTION | |
EXPOSURE LIMITS:
( ) ACGIH TLV
( ) OSHA PEL
(X) OTHER (SPECIFY)
SPECIFIC ENGINEERING CONTROLS (SUCH AS VENTILATION, ENCLOSED PROCESS):
USE PROCESS ENCLOSURES, LOCAL EXHAUST VENTILATION, OR OTHER ENGINEERING
CONTROLS TO KEEP AIRBORNE LEVELS BELOW RECOMMENDED EXPOSURE LIMITS. IF USER
OPERATIONS GENERATE DUST FUME OR MIST, USE VENTILATION TO KEEP EXPOSURE TO
AIRBORNE CONTAMINANTS BELOW THE EXPOSURE LIMIT.
PERSONAL PROTECTIVE EQUIPMENT:
(X) GLOVES
(X) RESPIRATOR
(X) EYE
(X) FOOTWEAR
(X) CLOTHING
( ) OTHER
IF CHECKED, PLEASE SPECIFY TYPE:
EYES: SAFETY GLASSES.
BODY: COVERALLS.
RESPIRATORY:
VENTILATION IS NORMALLY REQUIRED WHEN HANDLING THIS PRODUCT AT HIGH
TEMPERATURES. WEAR APPROPRIATE RESPIRATOR WHEN VENTILATION IS INADEQUATE.
HANDS: THERMALLY INSULATED GLOVES REQUIRED WHEN HANDLING HOT MATERIAL.
FEET: SAFETY SLIP PROOF SHOES IN AREAS WHERE SPILLS OR LEAKS CAN OCCUR.
| 9. PHYSICAL AND CHEMICAL PROPERTIES | |
PHYSICAL STATE: SOLID
ODOUR AND APPEARANCE: ODORLESS AND BROWN
ODOUR THRESHOLD (PPM): NO DATA AVAILABLE.
SPECIFIC GRAVITY (WATER=1): NO DATA AVAILABLE.
VAPOUR DENSITY (AIR=1): NO DATA AVAILABLE.
VAPOUR PRESSURE (MMHg): NO DATA AVAILABLE.
EVAPORATION RATE: NO DATA AVAILABLE.
BOILING POINT (DEG. C): NOT APPLICABLE
FREEZING POINT (DEG. C): NOT APPLICABLE
PH: NOT APPLICABLE
COEFFICIENT OF WATER/OIL DISTRIBUTION: NO DATA AVAILABLE.
SOLUBILITY IN WATER: INSOLUBLE.
| 10. STABILITY AND REACTIVITY | |
CHEMICAL STABILITY:
(X) YES
( ) NO
IF NO, UNDER WHICH CONDITIONS?:
INCOMPATIBILITY WITH OTHER SUBSTANCES:
(X) YES
( ) NO
IF YES, WHICH ONES?: STRONG OXIDIZING AGENTS, STRONG ACIDS.
REACTIVITY, AND UNDER WHAT CONDITIONS?:
REACTIVE WITH STRONG OXIDIZING AGENTS.
HAZARDOUS DECOMPOSITION PRODUCTS:
HAZARDOUS DECOMPOSITION PRODUCTS ARE CARBON MONOXIDE, CARBON DIOXIDE, DENSE
SMOKE AND HYDROCARBONS.
| 11. TOXICOLOGICAL INFORMATION | |
EFFECTS OF ACUTE EXPOSURE: NO DATA AVAILABLE.
EFFECTS OF CHRONIC EXPOSURE:
POLYSTYRENE:
CARCINOGENIC EFFECTS:
CLASSIFIED NONE BY NTP, NONE BY OSHA. 3 (NOT CLASSIFIABLE FOR HUMAN) BY
IARC
IRRITANCY OF PRODUCT:
MAY CAUSE EYE IRRITATION.
MAY CAUSE IRRITATION OF THE DIGESTIVE TRACT.
SKIN SENSITIZATION: NO HAZARD EXPECTED IN NORMAL USE.
RESPIRATORY SENSITIZATION: NO HAZARD EXPECTED IN NORMAL USE.
CARCINOGENICITY-IARC:
POLYSTYRENE: 3 (NOT CLASSIFIABLE FOR HUMAN) BY IARC
CARCINOGENICITY-ACGIH: NO INFORMATION AVAILABLE
REPRODUCTIVE TOXICITY: NO INFORMATION AVAILABLE
MUTAGENICITY: NOT AVAILABLE.
NAME OF SYNERGISTIC PRODUCTS/EFFECTS: NO INFORMATION AVAILABLE
| 12. ECOLOGICAL INFORMATION | |
AQUATIC TOXICITY:
WHITE MINERAL OIL:
ANALYSIS FOR ECOLOGICAL EFFECTS HAS NOT BEEN CONDUCTED ON THIS PRODUCT.
HOWEVER, IF SPILLED, THIS PRODUCT AND ANY CONTAMINATED SOIL OR WATER MAY BE
HARMFUL TO HUMAN, ANIMAL, AND AQUATIC LIFE.
| 13. DISPOSAL CONSIDERATIONS | |
WASTE DISPOSAL:
DISPOSE OF IN A MANNER CONSISTENT WITH FEDERAL, STATE, AND LOCAL
REGULATIONS.
| 14. TRANSPORT INFORMATION | |
SPECIAL SHIPPING INFORMATION: NOT ADDITIONAL REMARK.
PIN: NO DATA AVAILABLE.
TDG: NOT REGULATED.
DOT: NOT REGULATED.
IMO: NOT REGULATED.
ICAO: NOT REGULATED.
| 15. REGULATORY INFORMATION | |
WHMIS CLASSIFICATION: NOT CONTROLLED UNDER WHMIS
OSHA:
THIS PRODUCT IS NOT A "HAZARDOUS CHEMICAL" AS DEFINED BY THE OSHA HAZARD
COMMUNICATION STANDARD, 29 CFR 1910.1200.
SERA: NO INFORMATION AVAILABLE
TSCA: NO INFORMATION AVAILABLE
| 16. OTHER INFORMATION | |
LABEL REQUIREMENTS:
IRRITATING VAPORS TO RESPIRATORY SYSTEM AND EYES MAY FORM WHEN POLYMER IS
PROCESSED AT HIGH TEMPERATURES.
MOLTEN OR HEATED MATERIAL IN SKIN CONTACT CAN CAUSE SEVERE BURNS.
DISCLAIMER OF LIABILITY:
THE INFORMATION IN THIS MSDS WAS OBTAINED FROM SOURCES WHICH WE BELIEVE
ARE RELIABLE. HOWEVER, THE INFORMATION IS PROVIDED WITHOUT ANY WARRANTY,
EXPRESS OR IMPLIED, REGARDING ITS CORRECTNESS. THE CONDITIONS OR METHODS OF
HANDLING, STORAGE, USE OR DISPOSAL OF THE PRODUCT ARE BEYOND OUR CONTROL
AND MAY BE BEYOND OUR KNOWLEDGE. FOR THIS AND OTHER REASONS, WE DO NOT
ASSUME RESPONSIBILITY AND EXPRESSLY DISCLAIM LIABILITY FOR LOSS, DAMAGE OR
EXPENSE ARISING OUT OF OR IN ANY WAY CONNECTED WITH THE HANDLING, STORAGE,
USE OR DISPOSAL OF THE PRODUCT. THIS MSDS WAS PREPARED AND IS TO BE USED
ONLY FOR THIS PRODUCT. IF THE PRODUCT IS USED AS A COMPONENT IN ANOTHER
PRODUCT, THIS MSDS INFORMATION MAY NOT BE APPLICABLE.