| Common Name: | HAZMAT, OIL-ONLY AND UNIVERSAL POLYPROPYLENE ABSORBENTS |
| Manufacturer: | SPILLTECH |
| SDS Revision Date: | 6/15/2015 |
| SDS Format: | GHS-US |
| Item Number(s): | 443P64 |
| Manufacturer Model Number(s): |
SDS Table of Contents
Click the desired link below to jump directly to that section in the SDS.
S(R*)
SPILLTECH
SMART SPILL SOLUTIONS(TM)
SAFETY DATA SHEET
| 1. PRODUCT AND COMPANY IDENTIFICATION |  |
PRODUCT IDENTIFIER: HAZMAT, OIL-ONLY AND UNIVERSAL POLYPROPYLENE ABSORBENTS
GENERAL USE:
POLYPROPYLENE ABSORBENTS ARE DESIGNED TO CONFINE AND ABSORB LEAKS, DRIPS,
OVER-SPRAY AND SPILLS OF VARIOUS LIQUIDS.
PRODUCT DESCRIPTION:
PADS AND ROLLS AVAILABLE IN A VARIETY OF SHAPES, SIZES AND COLORS.
SPECIFIC PRODUCT IDENTIFIERS:
(INCLUDES BUT NOT LIMITED TO) RESPONDER(TM) MATS, DEFENDER(TM) MATS,
COMMANDER(TM) MATS, POLYBACKED COMMANDER(TM) MATS, PROTECTOR(TM) MATS,
SURVIVOR(TM) MATS, TRANSFORMER(TM) MATS, AIRLAID(TM) MATS, TRACKMAT,
RIGMAT, POLYBACKED RIGMAT, DRUMTOPS, SWEEP
COMPANY PROFILE:
SPILLTECH
BROOKLEY AEROPLEX
MOBILE, AL 36615
TELEPHONE NUMBERS:
EMERGENCY: (770) 929-6609
TECHNICAL INFORMATION: 1 (800) 228-3877
WWW.SPILLTECH.COM
| 2. HAZARDS IDENTIFICATION | |
GHS CLASSIFICATION: NOT A DANGEROUS SUBSTANCE ACCORDING TO GHS
POTENTIAL HEALTH EFFECTS:
EYE CONTACT:
NO HAZARD IN NORMAL USE OF PRODUCT. IF DUST IS GENERATED, MAY SCRATCH THE
EYES.
INGESTION: NO HAZARD IN NORMAL USE OF PRODUCT.
INHALATION:
NO HAZARD IN NORMAL USE OF PRODUCT. IF DUST IS GENERATED, MAY CAUSE MINOR
IRRITATION TO THE RESPIRATORY TRACT. LOW ORDER OF TOXICITY.
SKIN CONTACT: NO HAZARD IN NORMAL USE OF PRODUCT.
CHRONIC: NOT APPLICABLE.
| 3. COMPOSITION / INFORMATION ON INGREDIENTS | |
CAS: 9003-07-0 POLYPROPYLENE 100%
MAY CONTAIN ONE OR MORE OF THE FOLLOWING:
CAS: PROPRIETARY SURFACTANT
CAS: PROPRIETARY DYE PIGMENT
CAS: NONE METAL HARDWARE
CAS: 25038-59-9 POLYESTER NETTING
CAS: 9003-07-0 POLYPROPYLENE ROPE
CAS: 9002-88-4 POLYETHYLENE PANS
THESE PRODUCTS DO NOT CONTAIN ANY HAZARDOUS INGREDIENTS
| 4. FIRST AID MEASURES | |
EYE CONTACT:
NOT NORMALLY APPLICABLE. IF DISCOMFORT OCCURS, FLUSH THOROUGHLY WITH WATER.
IF IRRITATION OCCURS, SEEK MEDICAL ATTENTION.
INGESTION: NOT APPLICABLE.
INHALATION:
NOT NORMALLY APPLICABLE. IF DISCOMFORT OCCURS, SEEK MEDICAL ATTENTION.
SKIN CONTACT: NOT APPLICABLE.
| 5. FIRE FIGHTING MEASURES | |
EXTINGUISHING MEDIA:
UNUSED FORM:
CO2, WATER FOG, FOAM OR DRY CHEMICAL. DO NOT USE STRAIGHT STREAMS OF WATER.
USED FORM: THAT WHICH IS COMPATIBLE TO LIQUID(S) ABSORBED.
SPECIAL FIRE FIGHTING PROCEDURES: NONE. REFER TO ABSORBED LIQUID(S) SDS(S).
HAZARDOUS COMBUSTION PRODUCTS:
SMOKE, FUME, INCOMPLETE COMBUSTION PRODUCTS, OXIDES OF CARBON, FLAMMABLE
HYDROCARBONS.
UNUSUAL HAZARDS:
WHEN HEATED, THE VAPORS/FUMES GIVEN OFF MAY CAUSE RESPIRATORY TRACT
IRRITATION. SORBENTS WILL TAKE ON THE CHARACTERISTICS/PROPERTIES OF
WHATEVER LIQUID IS ABSORBED. THEREFORE, ALL MEASURES MUST BE TAKEN AS IF
YOU WERE HANDLING THE LIQUID ITSELF. SORBENTS DO NOT MAKE THE LIQUID LESS
HAZARDOUS. REFER TO ABSORBED LIQUID(S) SDS(S) BEFORE PROCEEDING. MATERIAL
CAN ACCUMULATE STATIC CHARGES WHICH MAY CAUSE AN IGNITION. OIL-ONLY STATIC
DISSIPATIVE POLYPROPYLENE ABSORBENTS DO NOT RENDER LIQUIDS NONFLAMMABLE,
NEUTRAL OR LESS HAZARDOUS.
| 6. ACCIDENTAL RELEASE MEASURES | |
SPILL OR LEAK PROCEDURES:
IF MATERIAL IS UNUSED, SWEEP OR PICK UP AND DISPOSE OF AS A NON-HAZARDOUS
MATERIAL.
| 7. HANDLING AND STORAGE | |
HANDLING AND STORING PRECAUTIONS:
MINIMIZE DUST GENERATION AND ACCUMULATION. STORE IN COOL, DRY PLACE.
GENERAL:
SORBENTS WILL TAKE ON THE CHARACTERISTICS/PROPERTIES OF WHATEVER LIQUID IS
ABSORBED. THEREFORE, ALL MEASURES MUST BE TAKEN AS IF YOU WERE HANDLING THE
LIQUID ITSELF. SORBENTS DO NOT MAKE THE LIQUID LESS HAZARDOUS. REFER TO
ABSORBED LIQUID(S) SDS(S) BEFORE PROCEEDING.
THE CONTAINER CAN BE HAZARDOUS WHEN EMPTY. FOLLOW LABEL CAUTIONS EVEN AFTER
THE CONTAINER IS EMPTY. DO NOT RE-USE EMPTY CONTAINERS FOR FOOD, CLOTHING
OR PRODUCTS FOR HUMAN OR ANIMAL CONSUMPTION, OR WHERE SKIN CONTACT CAN
OCCUR.
| 8. EXPOSURE CONTROLS / PERSONAL PROTECTION | |
EXPOSURE LIMITS: NONE
ENGINEERING CONTROLS: NONE REQUIRED.
PERSONAL PROTECTION:
EYES: SAFETY GLASSES WITH SIDE SHIELDS ARE A GOOD INDUSTRIAL PRACTICE.
RESPIRATOR: NONE REQUIRED.
GLOVES:
NOT NORMALLY REQUIRED. HOWEVER, CLOTH, CANVAS OR LEATHER GLOVES ARE A GOOD
INDUSTRIAL PRACTICE.
OTHER: NONE REQUIRED.
IN ITS PRESENT FORM, THERE IS LITTLE OR NO DUST TO PRESENT AN OSHA
HAZARD
| 9. PHYSICAL AND CHEMICAL PROPERTIES | |
APPEARANCE: SOFT PADS AND ROLLS, CAN BE VARIOUS COLORS
ODOR: NONE TO MILD
ODOR THRESHOLD: NOT ESTABLISHED
PH: NOT AVAILABLE
FLASH POINT: NOT KNOWN
METHOD: NOT APPLICABLE
AUTO IGNITION: NOT AVAILABLE
FLAMMABILITY OR EXPLOSIVE LIMITS: NOT DETERMINED
CONDITIONS OF FLAMMABILITY: NOT DETERMINED
MELTING POINT/FREEZING POINT: 150 DEG. - 170 DEG. C
BOILING POINT / BOILING RANGE: NOT AVAILABLE
EVAPORATION RATE: NOT AVAILABLE
VAPOR PRESSURE: NOT APPLICABLE
VAPOR DENSITY: NOT AVAILABLE
RELATIVE DENSITY: NOT ESTABLISHED
SOLUBILITY IN WATER: NEGLIGIBLE
COEFFICIENT OF WATER/OIL DISTRIBUTION: NOT APPLICABLE
BULK DENSITY AT 20 DEG. C: 0.4 G/CC - 0.7 G/CC
| 10. STABILITY AND REACTIVITY | |
GENERAL: STABLE UNDER NORMAL CONDITIONS.
CONDITIONS OF REACTIVITY: NOT ESTABLISHED
INCOMPATIBLE MATERIALS:
STRONG OXIDIZING AGENTS MAY DEGRADE PRODUCT OVER AN EXTENDED PERIOD OF
TIME, FLUORINE
CONDITIONS TO AVOID:
OPEN FLAME, ELEVATED TEMPERATURES FOR PROLONGED PERIODS OF TIME.
HAZARDOUS DECOMPOSITION:
MATERIAL DOES NOT DECOMPOSE AT AMBIENT TEMPERATURES.
HAZARDOUS POLYMERIZATION: WILL NOT OCCUR
| 11. TOXICOLOGICAL INFORMATION | |
LD50: NOT AVAILABLE
LC50: NOT AVAILABLE
CARCINOGENICITY:
IARC: NO
NTP: NO
OSHA: NO
CALIFORNIA PROP 65: NO LISTED INGREDIENT
CHRONIC/OTHER EFFECTS:
DUST MAY BE IRRITATING TO THE EYES AND RESPIRATORY TRACT. ELEVATED
TEMPERATURES OR MECHANICAL ACTION MAY FORM VAPORS, MISTS OR FUMES
WHICH MAY BE IRRITATING TO THE EYES AND RESPIRATORY TRACT.
REPRODUCTION TOXICITY: NOT AVAILABLE
TERATOGENICITY: NOT AVAILABLE
MUTAGENICITY: NOT AVAILABLE
SYNERGISTIC PRODUCTS: NOT AVAILABLE
| 12. ECOLOGICAL INFORMATION | |
NOT EXPECTED TO BE HARMFUL TO AQUATIC OR TERRESTRIAL ORGANISMS.
| 13. WASTE DISPOSAL CONSIDERATIONS | |
WASTE DISPOSAL METHOD:
IF UNUSED, NO SPECIAL PRECAUTIONS ARE NECESSARY.
IF USED, REFER TO ABSORBED LIQUID(S) SDS(S) BEFORE PROCEEDING. SORBENTS
WILL TAKE ON THE CHARACTERISTICS/PROPERTIES OF WHATEVER LIQUID IS ABSORBED.
THEREFORE, ALL MEASURES MUST BE TAKEN AS IF YOU WERE HANDLING THE LIQUID
ITSELF. SORBENTS DO NOT MAKE THE LIQUID LESS HAZARDOUS. THEREFORE, IN
CERTAIN TYPES OF CLEANUP APPLICATIONS THE NATURE OF THE MATERIAL RECOVERED
WILL CLASSIFY THE RESULTING SPENT MATERIAL AS A HAZARDOUS COMPONENT. IN
SUCH INSTANCES THE MATERIAL SHOULD BE DISPOSED OF VIA AN APPROVED
HAZARDOUS WASTE DISPOSAL SERVICE AND THE APPROPRIATE MANIFESTING OBTAINED.
DISPOSE OF IN ACCORDANCE WITH FEDERAL, STATE AND LOCAL REGULATIONS.
| 14. TRANSPORTATION INFORMATION | |
DOT (DEPARTMENT OF TRANSPORTATION):
PROPER SHIPPING NAME: NOT REGULATED
HAZARD CLASS: NOT REGULATED
IDENTIFICATION NUMBER: NOT APPLICABLE
| 15. REGULATORY INFORMATION | |
OSHA HAZARD COMMUNICATION STANDARD, 29 CFR 1910.1200: NONE.
SARA TITLE III (SUPERFUND AMENDMENTS AND REAUTHORIZATION ACT):
NO LISTED INGREDIENT
TSCA (TOXIC SUBSTANCES CONTROL ACT):
INGREDIENTS OF THIS PRODUCT ARE ON THE INVENTORY LIST.
| 16. OTHER INFORMATION | |
NFPA HAZARD RATINGS:
HEALTH 1
FIRE 1
REACTIVITY 0
NONE 0
EXTREME 4
PREPARED BY: DALE GATEHOUSE, ENTREPRISES KRENDA INC.
APPROVED BY: ROBIN THORNETT, MARKETING MANAGER, SPILLTECH
APPROVAL DATE: JUNE 15, 2015
SDS CODE: SDS101
THE INFORMATION CONTAINED HEREIN IS GIVEN IN GOOD FAITH, BUT NO WARRANTY,
EXPRESSED OR IMPLIED, IS MADE.
SDS #: SDS101