| Common Name: | FSK FACING TAPE |
| Manufacturer: | K-FLEX |
| SDS Revision Date: | 1/1/2018 |
| SDS Format: | OTHER INFORMATION SHEET |
| Item Number(s): | 45AR23, 45AT17 |
| Manufacturer Model Number(s): |
SDS Table of Contents
Click the desired link below to jump directly to that section in the SDS.
IK INSULATION GROUP
K-FLEX USA
K-FLEX FSK FACING TAPE
01-JAN-2018
SDS15-0118
K-FLEX FSK FACING TAPE
SAFETY DATA SHEET
| 1. PRODUCT AND SUPPLIER INFORMATION |  |
PRODUCT DESCRIPTION: FOIL-SCRIM-KRAFT TAPE
PRODUCT DESIGNATIONS: K-FLEX FSK FACING TAPE
SUPPLIER: K-FLEX USA
ADDRESS:
100 K FLEX WAY
YOUNGSVILLE, NC 27596
PHONE: 800-765-6475
| 2. HAZARDOUS COMPONENTS | |
THE ABOVE LISTED PRODUCTS MAY CONTAIN ONE OR MORE HAZARDOUS CHEMICAL
COMPONENTS. HOWEVER, DUE TO THEIR INCORPORATION INTO THE STRUCTURE OF
THE PRODUCTS, EXPOSURE TO SUCH COMPONENTS IS NOT ANTICIPATED UNDER
NORMAL CONDITIONS OF USE. SEE SECTION 16 FOR FURTHER DISCUSSION.
| 3. DESCRIPTION OF HAZARDS | |
EXPOSURE TO HAZARDS OF CHEMICAL COMPONENTS IS NOT ANTICIPATED IN NORMAL
USE. SDS FOR INDIVIDUAL COMPONENTS ARE AVAILABLE FROM VENTURE TAPE UPON
REQUEST BY CONTACTING TECHNICAL SERVICE AT THE ABOVE NUMBER.
| 4. FIRST AID MEASURES | |
CLEAN AND DRESS WOUND IF CUT BY PRODUCT EDGE. THERE ARE NO KNOWN ACUTE,
IMMEDIATE EFFECTS REQUIRING TREATMENT AS A RESULT OF THE USE OF THIS
PRODUCT AS SUPPLIED.
| 5. FIRE-FIGHTING MEASURES | |
ALL EXTINGUISHING CHEMICALS AND METHODS ARE APPLICABLE. SELF-CONTAINED,
POSITIVE PRESSURE BREATHING APPARATUS SHOULD BE USED IF AVAILABLE IN FIRE
CONDITIONS. FIRE OR VERY HIGH TEMPERATURES (NOT NORMAL CONDITIONS OF USE)
CAN CAUSE RELEASE OF TOXIC SMOKE AND FUMES.
| 6. ACCIDENTAL RELEASE MEASURES | |
NOT APPLICABLE.
| 7. HANDLING AND STORAGE GUIDELINES | |
USE CARE TO AVOID PAPER CUTS FROM SHEET EDGES. NO OTHER SPECIAL HANDLING OR
STORAGE PRECAUTIONS APPLY IN RESPECT TO POTENTIAL HAZARDS.
| 8. EXPOSURE CONTROLS AND PERSONAL PROTECTION | |
NONE REQUIRED IN NORMAL USE. EXERCISE CARE TO AVOID PAPER CUTS FROM SHEET
EDGES.
| 9. PHYSICAL AND CHEMICAL PROPERTIES | |
PRODUCT IS A MANUFACTURED ARTICLE IN THE FORM OF A FLEXIBLE SHEET OR STRIP.
CONTAINS SOME COMBINATION OF TWO OR MORE OF THE FOLLOWING MAJOR MATERIAL
COMPONENTS:
ALUMINUM FOIL (7U), FIBERGLASS YARN, KRAFT PAPER, SOLVENT ACRYLIC ADHESIVE,
AND SILICONE RELEASE PAPER.
| 10. STABILITY AND REACTIVITY | |
HAZARDOUS DECOMPOSITION WILL OCCUR ONLY UNDER FIRE CONDITIONS. VARIOUS
HARMFUL COMPOUNDS COULD BE FORMED DURING COMBUSTION. NO HAZARDS ASSOCIATED
WITH NORMAL USE.
| 11. TOXICOLOGICAL INFORMATION | |
ALTHOUGH HAZARDOUS CHEMICALS MAY BE USED IN THIS PRODUCT, EXPOSURE TO THOSE
CHEMICALS AND POSSIBLE HAZARDOUS EFFECTS WILL NOT OCCUR WITH THE PRODUCT IN
THIS FORM, IN NORMAL USE. SDS FOR INDIVIDUAL HAZARDOUS CHEMICALS CAN BE
SUPPLIED UPON REQUEST BY CONTACTING TECHNICAL SERVICE AT THE ABOVE NUMBER.
| 12. ECOLOGICAL INFORMATION | |
THE ANTICIPATED INSTANCES OF RELEASE INTO THE ENVIRONMENT WOULD BE DURING
DISPOSAL OF SCRAPPED BUILDING MATERIALS, OF WHICH THIS PRODUCT COULD BE A
PART, OR WASTE DURING USE. OTHER THAN THE PAPER COMPONENT, THE MATERIALS OF
CONSTRUCTION ARE VERY RESISTANT TO BIODEGRADATION AND ARE NOT WATER
SOLUBLE. POTENTIAL IMPACT MAY BE AS PER INDIVIDUAL HAZARDOUS COMPONENTS,
SDS FOR WHICH CAN BE SUPPLIED UPON REQUEST BY CONTACTING TECHNICAL SERVICE
AT THE ABOVE NUMBER.
| 13. DISPOSAL CONSIDERATIONS | |
DISPOSE OF PER APPROPRIATE LOCAL REGULATIONS. PRODUCT IS NOT RECYCLABLE.
| 14. TRANSPORT INFORMATION | |
NO SPECIAL PROCEDURES REQUIRED.
| 15. REGULATORY INFORMATION | |
NO KNOWN REGULATIONS APPLY.
| 16. OTHER INFORMATION | |
PER THE CODE OF FEDERAL REGULATIONS 1910.1200, THIS PRODUCT IS
CONSIDERED BY K-FLEX USA TO BE AN ARTICLE, DEFINED IN THE REGULATION
AS "A MANUFACTURED ITEM OTHER THAN A FLUID OR PARTICLE.
(I) WHICH IS FORMED TO A SPECIFIC SHAPE OR DESIGN DURING MANUFACTURE
(II) HAS END USE FUNCTION(S) DEPENDENT IN WHOLE OR IN PART UPON ITS SHAPE
OR DESIGN DURING END USE; AND
(III) WHICH DOES NOT RELEASE MORE THAN VERY SMALL QUANTITIES, E.G., MINUTE
OR TRACE AMOUNTS OF A HAZARDOUS CHEMICAL, AND DOES NOT POSE A PHYSICAL
HAZARD OR HEALTH RISK TO EMPLOYEES."
ALTHOUGH THIS PRODUCT MAY CONTAIN HAZARDOUS COMPONENTS, WE DO NOT BELIEVE
THOSE HAZARDS ARE PRESENT AS MANUFACTURED OR WHEN USED. SINCE THE PRODUCT
MEETS THE DEFINITION OF AN ARTICLE, IT IS TECHNICALLY NOT SUBJECT TO THIS
REGULATION OR SDS REPORTING. THIS DOCUMENT IS PROVIDED FOR INFORMATIONAL
PURPOSES, AND IS NOT MEANT TO IMPLY THAT THIS PRODUCT IS HAZARDOUS.
K-FLEX USA
DATE: JANUARY 01 2018