| Common Name: | SCOTCH-WELD STRUCTURAL PLASTIC ADHESIVE DP8005, BLACK |
| Manufacturer: | 3M |
| SDS Revision Date: | 4/1/2016 |
| SDS Format: | GHS-US |
| Item Number(s): | 49Z641 |
| Manufacturer Model Number(s): |
SDS Table of Contents
Click the desired link below to jump directly to that section in the SDS.
3M(TM) SCOTCH-WELD(TM) STRUCTURAL PLASTIC ADHESIVE DP8005, BLACK
04/01/16
3M
SAFETY DATA SHEET
COPYRIGHT, 2016, 3M COMPANY.
ALL RIGHTS RESERVED. COPYING AND/OR DOWNLOADING OF THIS INFORMATION FOR
THE PURPOSE OF PROPERLY UTILIZING 3M PRODUCTS IS ALLOWED PROVIDED THAT:
(1) THE INFORMATION IS COPIED IN FULL WITH NO CHANGES UNLESS PRIOR WRITTEN
AGREEMENT IS OBTAINED FROM 3M, AND
(2) NEITHER THE COPY NOR THE ORIGINAL IS RESOLD OR OTHERWISE DISTRIBUTED
WITH THE INTENTION OF EARNING A PROFIT THEREON.
DOCUMENT GROUP: 28-2535-4
ISSUE DATE: 04/01/16
VERSION NUMBER: 2.01
SUPERCEDES DATE: 04/16/15
PRODUCT IDENTIFIER:
3M(TM) SCOTCH-WELD(TM) STRUCTURAL PLASTIC ADHESIVE DP8005, BLACK
ID NUMBER(S):
62-2779-0436-3, 62-2779-0437-1, 62-2779-0438-9, 62-2779-0445-4,
62-2779-1445-3, 62-2779-1450-3, 62-2779-3630-8, 62-2779-3936-9
RECOMMENDED USE: ADHESIVE
SUPPLIER'S DETAILS:
MANUFACTURER: 3M
DIVISION: INDUSTRIAL ADHESIVES AND TAPES DIVISION
ADDRESS:
3M CENTER
ST. PAUL, MN 55144-1000
USA
TELEPHONE: 1-888-3M HELPS (1-888-364-3577)
EMERGENCY TELEPHONE NUMBER: 1-800-364-3577 OR (651) 737-6501 (24 HOURS)
THIS PRODUCT IS A KIT OR A MULTIPART PRODUCT WHICH CONSISTS OF MULTIPLE,
INDEPENDENTLY PACKAGED COMPONENTS. A SAFETY DATA SHEET (SDS), ARTICLE
INFORMATION SHEET (AIS), OR ARTICLE INFORMATION LETTER (AIL) FOR EACH OF
THESE COMPONENTS IS INCLUDED. PLEASE DO NOT SEPARATE THE COMPONENT
DOCUMENTS FROM THIS COVER SHEET.
THE DOCUMENT NUMBERS FOR COMPONENTS OF THIS PRODUCT ARE:
28-2531-3, 18-8243-0
DISCLAIMER:
THE INFORMATION IN THIS SAFETY DATA SHEET (SDS) IS BELIEVED TO BE CORRECT
AS OF THE DATE ISSUED. 3M MAKES NO WARRANTIES, EXPRESSED OR IMPLIED,
INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE OR COURSE OF PERFORMANCE OR USAGE OF
TRADE. USER IS RESPONSIBLE FOR DETERMINING WHETHER THE 3M PRODUCT IS FIT
FOR A PARTICULAR PURPOSE AND SUITABLE FOR USER'S METHOD OF USE OR
APPLICATION. GIVEN THE VARIETY OF FACTORS THAT CAN AFFECT THE USE AND
APPLICATION OF A 3M PRODUCT, SOME OF WHICH ARE UNIQUELY WITHIN THE USER'S
KNOWLEDGE AND CONTROL, IT IS ESSENTIAL THAT THE USER EVALUATE THE 3M
PRODUCT TO DETERMINE WHETHER IT IS FIT FOR A PARTICULAR PURPOSE AND
SUITABLE FOR USER'S METHOD OF USE OR APPLICATION.
3M PROVIDES INFORMATION IN ELECTRONIC FORM AS A SERVICE TO ITS CUSTOMERS.
DUE TO THE REMOTE POSSIBILITY THAT ELECTRONIC TRANSFER MAY HAVE RESULTED IN
ERRORS, OMISSIONS OR ALTERATIONS IN THIS INFORMATION, 3M MAKES NO
REPRESENTATIONS AS TO ITS COMPLETENESS OR ACCURACY. IN ADDITION,
INFORMATION OBTAINED FROM A DATABASE MAY NOT BE AS CURRENT AS THE
INFORMATION IN THE SDS AVAILABLE DIRECTLY FROM 3M
3M USA SDSS ARE AVAILABLE AT WWW.3M.COM
3M(TM) SCOTCH-WELD(TM) STRUCTURAL PLASTIC ADHESIVE DP8005 BLACK AND
STRUCTURAL PLASTIC ADHESIVE 8005 BLACK, PART A
04/16/15
3M
SAFETY DATA SHEET
COPYRIGHT, 2015, 3M COMPANY.
ALL RIGHTS RESERVED. COPYING AND/OR DOWNLOADING OF THIS INFORMATION FOR
THE PURPOSE OF PROPERLY UTILIZING 3M PRODUCTS IS ALLOWED PROVIDED THAT:
(1) THE INFORMATION IS COPIED IN FULL WITH NO CHANGES UNLESS PRIOR WRITTEN
AGREEMENT IS OBTAINED FROM 3M, AND
(2) NEITHER THE COPY NOR THE ORIGINAL IS RESOLD OR OTHERWISE DISTRIBUTED
WITH THE INTENTION OF EARNING A PROFIT THEREON.
DOCUMENT GROUP: 18-8243-0
ISSUE DATE: 04/16/15
VERSION NUMBER: 3.00
SUPERCEDES DATE: 01/04/12
| SECTION 1: IDENTIFICATION |  |
1.1. PRODUCT IDENTIFIER:
3M(TM) SCOTCH-WELD(TM) STRUCTURAL PLASTIC ADHESIVE DP8005 BLACK AND
STRUCTURAL PLASTIC ADHESIVE 8005 BLACK, PART A
PRODUCT IDENTIFICATION NUMBERS: 62-2879-7530-4, 62-2879-8530-3
1.2. RECOMMENDED USE AND RESTRICTIONS ON USE:
RECOMMENDED USE: STRUCTURAL ADHESIVE
1.3. SUPPLIER'S DETAILS:
MANUFACTURER: 3M
DIVISION: INDUSTRIAL ADHESIVES AND TAPES DIVISION
ADDRESS:
3M CENTER
ST. PAUL, MN 55144-1000
USA
TELEPHONE: 1-888-3M HELPS (1-888-364-3577)
1.4. EMERGENCY TELEPHONE NUMBER:
1-800-364-3577 OR (651) 737-6501 (24 HOURS)
| SECTION 2: HAZARD IDENTIFICATION | |
2.1. HAZARD CLASSIFICATION:
FLAMMABLE LIQUID: CATEGORY 4.
SERIOUS EYE DAMAGE/IRRITATION: CATEGORY 1.
RESPIRATORY SENSITIZER: CATEGORY 1.
SKIN SENSITIZER: CATEGORY 1.
GERM CELL MUTAGENICITY: CATEGORY 2.
2.2. LABEL ELEMENTS:
SIGNAL WORD: DANGER
SYMBOLS:
CORROSION
HEALTH HAZARD
PICTOGRAMS:
CORROSION
HEALTH HAZARD
HAZARD STATEMENTS:
COMBUSTIBLE LIQUID.
CAUSES SERIOUS EYE DAMAGE.
MAY CAUSE ALLERGY OR ASTHMA SYMPTOMS OR BREATHING DIFFICULTIES IF INHALED.
MAY CAUSE AN ALLERGIC SKIN REACTION.
SUSPECTED OF CAUSING GENETIC DEFECTS.
PRECAUTIONARY STATEMENTS:
PREVENTION:
OBTAIN SPECIAL INSTRUCTIONS BEFORE USE.
DO NOT HANDLE UNTIL ALL SAFETY PRECAUTIONS HAVE BEEN READ AND UNDERSTOOD.
KEEP AWAY FROM HEAT/SPARKS/OPEN FLAMES/HOT SURFACES. - NO SMOKING.
AVOID BREATHING DUST/FUME/GAS/MIST/VAPORS/SPRAY.
IN CASE OF INADEQUATE VENTILATION WEAR RESPIRATORY PROTECTION.
WEAR PROTECTIVE GLOVES AND EYE/FACE PROTECTION.
CONTAMINATED WORK CLOTHING MUST NOT BE ALLOWED OUT OF THE WORKPLACE.
RESPONSE:
IF INHALED:
IF BREATHING IS DIFFICULT, REMOVE PERSON TO FRESH AIR AND KEEP COMFORTABLE
FOR BREATHING.
IF EXPERIENCING RESPIRATORY SYMPTOMS:
CALL A POISON CENTER OR DOCTOR/PHYSICIAN.
IF IN EYES:
RINSE CAUTIOUSLY WITH WATER FOR SEVERAL MINUTES. REMOVE CONTACT LENSES, IF
PRESENT AND EASY TO DO.
CONTINUE RINSING.
IF ON SKIN:
WASH WITH PLENTY OF SOAP AND WATER.
IMMEDIATELY CALL A POISON CENTER OR DOCTOR/PHYSICIAN.
IF SKIN IRRITATION OR RASH OCCURS: GET MEDICAL ADVICE/ATTENTION.
WASH CONTAMINATED CLOTHING BEFORE REUSE.
IF EXPOSED OR CONCERNED: GET MEDICAL ADVICE/ATTENTION.
IN CASE OF FIRE:
USE A FIRE FIGHTING AGENT SUITABLE FOR FLAMMABLE LIQUIDS SUCH AS DRY
CHEMICAL OR CARBON DIOXIDE TO EXTINGUISH.
STORAGE:
KEEP COOL.
STORE LOCKED UP IN A WELL-VENTILATED PLACE.
DISPOSAL:
DISPOSE OF CONTENTS/CONTAINER IN ACCORDANCE WITH APPLICABLE
LOCAL/REGIONAL/NATIONAL/INTERNATIONAL REGULATIONS.
2.3. HAZARDS NOT OTHERWISE CLASSIFIED: NONE.
| SECTION 3: COMPOSITION/INFORMATION ON INGREDIENTS | |
INGREDIENT C.A.S. NO. % BY WT
POLYESTER ADIPATE TRADE SECRET* 40 - 70 TRADE SECRET*
(NJTS REG NO 04499600-7142)
POLYFUNCTIONAL AZIRIDINE 64265-57-2 20 - 40 TRADE SECRET*
AMINE BORANE COMPLEX 223674-50-8 5 - 20 TRADE SECRET*
AMORPHOUS SILICA 67762-90-7 0.5 - 1.5 TRADE SECRET*
NJTS OR NJTSRN: NEW JERSEY TRADE SECRET REGISTRY NUMBER.
*THE SPECIFIC CHEMICAL IDENTITY AND/OR EXACT PERCENTAGE (CONCENTRATION) OF
THIS COMPOSITION HAS BEEN WITHHELD AS A TRADE SECRET.
| SECTION 4: FIRST AID MEASURES | |
4.1. DESCRIPTION OF FIRST AID MEASURES:
INHALATION:
REMOVE PERSON TO FRESH AIR. IF YOU FEEL UNWELL, GET MEDICAL ATTENTION.
SKIN CONTACT:
IMMEDIATELY WASH WITH SOAP AND WATER. REMOVE CONTAMINATED CLOTHING AND
WASH BEFORE REUSE. IF SIGNS/SYMPTOMS DEVELOP, GET MEDICAL ATTENTION.
EYE CONTACT:
IMMEDIATELY FLUSH WITH LARGE AMOUNTS OF WATER FOR AT LEAST 15 MINUTES.
REMOVE CONTACT LENSES IF EASY TO DO. CONTINUE RINSING. IMMEDIATELY GET
MEDICAL ATTENTION.
IF SWALLOWED: RINSE MOUTH. IF YOU FEEL UNWELL, GET MEDICAL ATTENTION.
4.2. MOST IMPORTANT SYMPTOMS AND EFFECTS, BOTH ACUTE AND DELAYED:
SEE SECTION 11.1. INFORMATION ON TOXICOLOGICAL EFFECTS.
4.3. INDICATION OF ANY IMMEDIATE MEDICAL ATTENTION AND SPECIAL TREATMENT
REQUIRED: NOT APPLICABLE
| SECTION 5: FIRE-FIGHTING MEASURES | |
5.1. SUITABLE EXTINGUISHING MEDIA:
IN CASE OF FIRE:
USE A FIRE FIGHTING AGENT SUITABLE FOR FLAMMABLE LIQUIDS SUCH AS DRY
CHEMICAL OR CARBON DIOXIDE TO EXTINGUISH.
5.2. SPECIAL HAZARDS ARISING FROM THE SUBSTANCE OR MIXTURE:
CLOSED CONTAINERS EXPOSED TO HEAT FROM FIRE MAY BUILD PRESSURE AND EXPLODE.
HAZARDOUS DECOMPOSITION OR BY-PRODUCTS:
SUBSTANCE CONDITION
ALDEHYDES DURING COMBUSTION
CARBON MONOXIDE DURING COMBUSTION
CARBON DIOXIDE DURING COMBUSTION
IRRITANT VAPORS OR GASES DURING COMBUSTION
OXIDES OF NITROGEN DURING COMBUSTION
5.3. SPECIAL PROTECTIVE ACTIONS FOR FIRE-FIGHTERS:
WATER MAY NOT EFFECTIVELY EXTINGUISH FIRE; HOWEVER, IT SHOULD BE USED
TO KEEP FIRE-EXPOSED CONTAINERS AND SURFACES COOL AND PREVENT EXPLOSIVE
RUPTURE.
| SECTION 6: ACCIDENTAL RELEASE MEASURES | |
6.1. PERSONAL PRECAUTIONS, PROTECTIVE EQUIPMENT AND EMERGENCY PROCEDURES:
EVACUATE AREA. KEEP AWAY FROM HEAT/SPARKS/OPEN FLAMES/HOT SURFACES. - NO
SMOKING. USE ONLY NON-SPARKING TOOLS. VENTILATE THE AREA WITH FRESH AIR.
FOR LARGE SPILL, OR SPILLS IN CONFINED SPACES, PROVIDE MECHANICAL
VENTILATION TO DISPERSE OR EXHAUST VAPORS, IN ACCORDANCE WITH GOOD
INDUSTRIAL HYGIENE PRACTICE.
WARNING!
A MOTOR COULD BE AN IGNITION SOURCE AND COULD CAUSE FLAMMABLE GASES OR
VAPORS IN THE SPILL AREA TO BURN OR EXPLODE. REFER TO OTHER SECTIONS OF
THIS SDS FOR INFORMATION REGARDING PHYSICAL AND HEALTH HAZARDS,
RESPIRATORY PROTECTION, VENTILATION, AND PERSONAL PROTECTIVE EQUIPMENT.
6.2. ENVIRONMENTAL PRECAUTIONS:
AVOID RELEASE TO THE ENVIRONMENT. FOR LARGER SPILLS, COVER DRAINS AND BUILD
DIKES TO PREVENT ENTRY INTO SEWER SYSTEMS OR BODIES OF WATER.
6.3. METHODS AND MATERIAL FOR CONTAINMENT AND CLEANING UP:
CONTAIN SPILL. WORKING FROM AROUND THE EDGES OF THE SPILL INWARD, COVER
WITH BENTONITE, VERMICULITE, OR COMMERCIALLY AVAILABLE INORGANIC ABSORBENT
MATERIAL. MIX IN SUFFICIENT ABSORBENT UNTIL IT APPEARS DRY. REMEMBER,
ADDING AN ABSORBENT MATERIAL DOES NOT REMOVE A PHYSICAL, HEALTH, OR
ENVIRONMENTAL HAZARD. COLLECT AS MUCH OF THE SPILLED MATERIAL AS POSSIBLE
USING NON-SPARKING TOOLS. PLACE IN A CLOSED CONTAINER APPROVED FOR
TRANSPORTATION BY APPROPRIATE AUTHORITIES. CLEAN UP RESIDUE WITH AN
APPROPRIATE SOLVENT SELECTED BY A QUALIFIED AND AUTHORIZED PERSON.
VENTILATE THE AREA WITH FRESH AIR. READ AND FOLLOW SAFETY PRECAUTIONS ON
THE SOLVENT LABEL AND SDS. SEAL THE CONTAINER. DISPOSE OF COLLECTED
MATERIAL AS SOON AS POSSIBLE.
| SECTION 7: HANDLING AND STORAGE | |
7.1. PRECAUTIONS FOR SAFE HANDLING:
FOR INDUSTRIAL OR PROFESSIONAL USE ONLY. DO NOT HANDLE UNTIL ALL SAFETY
PRECAUTIONS HAVE BEEN READ AND UNDERSTOOD. KEEP AWAY FROM HEAT/SPARKS/OPEN
FLAMES/HOT SURFACES. - NO SMOKING. AVOID BREATHING
DUST/FUME/GAS/MIST/VAPORS/SPRAY. DO NOT GET IN EYES, ON SKIN, OR ON
CLOTHING. DO NOT EAT, DRINK OR SMOKE WHEN USING THIS PRODUCT.
WASH THOROUGHLY AFTER HANDLING. CONTAMINATED WORK CLOTHING SHOULD NOT BE
ALLOWED OUT OF THE WORKPLACE. WASH CONTAMINATED CLOTHING BEFORE REUSE.
AVOID CONTACT WITH OXIDIZING AGENTS (EG. CHLORINE, CHROMIC ACID ETC.) USE
PERSONAL PROTECTIVE EQUIPMENT (GLOVES, RESPIRATORS, ETC.) AS REQUIRED.
7.2. CONDITIONS FOR SAFE STORAGE INCLUDING ANY INCOMPATIBILITIES:
STORE IN A WELL-VENTILATED PLACE. KEEP COOL. STORE AWAY FROM HEAT.
STORE AWAY FROM ACIDS. STORE AWAY FROM OXIDIZING AGENTS.
| SECTION 8: EXPOSURE CONTROLS/PERSONAL PROTECTION | |
8.1. CONTROL PARAMETERS:
OCCUPATIONAL EXPOSURE LIMITS:
IF A COMPONENT IS DISCLOSED IN SECTION 3 BUT DOES NOT APPEAR IN THE TABLE
BELOW, AN OCCUPATIONAL EXPOSURE LIMIT IS NOT AVAILABLE FOR THE COMPONENT.
INGREDIENT C.A.S. NO. AGENCY LIMIT TYPE ADDITIONAL
COMMENTS
AMORPHOUS SILICA 67762-90-7 CMRG CEIL: 5 MG/M3
SILICA, AMORPHOUS 67762-90-7 OSHA TWA CONCENTRATION:
0.8 MG/M3
TWA:
20 MILLIONS OF
PARTICLES/CU. FT.
ACGIH: AMERICAN CONFERENCE OF GOVERNMENTAL INDUSTRIAL HYGIENISTS
AIHA: AMERICAN INDUSTRIAL HYGIENE ASSOCIATION
CMRG: CHEMICAL MANUFACTURER'S RECOMMENDED GUIDELINES
OSHA:
UNITED STATES DEPARTMENT OF LABOR - OCCUPATIONAL SAFETY AND HEALTH
ADMINISTRATION
TWA: TIME-WEIGHTED-AVERAGE
STEL: SHORT TERM EXPOSURE LIMIT
CEIL: CEILING
8.2. EXPOSURE CONTROLS:
8.2.1. ENGINEERING CONTROLS:
USE GENERAL DILUTION VENTILATION AND/OR LOCAL EXHAUST VENTILATION TO
CONTROL AIRBORNE EXPOSURES TO BELOW RELEVANT EXPOSURE LIMITS AND/OR CONTROL
DUST/FUME/GAS/MIST/VAPORS/SPRAY. IF VENTILATION IS NOT ADEQUATE, USE
RESPIRATORY PROTECTION EQUIPMENT.
8.2.2. PERSONAL PROTECTIVE EQUIPMENT (PPE):
EYE/FACE PROTECTION:
SELECT AND USE EYE/FACE PROTECTION TO PREVENT CONTACT BASED ON THE RESULTS
OF AN EXPOSURE ASSESSMENT.
THE FOLLOWING EYE/FACE PROTECTION(S) ARE RECOMMENDED:
FULL FACE SHIELD
INDIRECT VENTED GOGGLES
SKIN/HAND PROTECTION:
SELECT AND USE GLOVES AND/OR PROTECTIVE CLOTHING APPROVED TO RELEVANT LOCAL
STANDARDS TO PREVENT SKIN CONTACT BASED ON THE RESULTS OF AN EXPOSURE
ASSESSMENT. SELECTION SHOULD BE BASED ON USE FACTORS SUCH AS EXPOSURE
LEVELS, CONCENTRATION OF THE SUBSTANCE OR MIXTURE, FREQUENCY AND DURATION,
PHYSICAL CHALLENGES SUCH AS TEMPERATURE EXTREMES, AND OTHER USE CONDITIONS.
CONSULT WITH YOUR GLOVE AND/OR PROTECTIVE CLOTHING MANUFACTURER FOR
SELECTION OF APPROPRIATE COMPATIBLE GLOVES/PROTECTIVE CLOTHING.
NOTE:
NITRILE GLOVES MAY BE WORN OVER POLYMER LAMINATE GLOVES TO IMPROVE
DEXTERITY.
GLOVES MADE FROM THE FOLLOWING MATERIAL(S) ARE RECOMMENDED:
POLYMER LAMINATE
RESPIRATORY PROTECTION:
AN EXPOSURE ASSESSMENT MAY BE NEEDED TO DECIDE IF A RESPIRATOR IS REQUIRED.
IF A RESPIRATOR IS NEEDED, USE RESPIRATORS AS PART OF A FULL RESPIRATORY
PROTECTION PROGRAM. BASED ON THE RESULTS OF THE EXPOSURE ASSESSMENT, SELECT
FROM THE FOLLOWING RESPIRATOR TYPE(S) TO REDUCE INHALATION EXPOSURE:
HALF FACEPIECE OR FULL FACEPIECE AIR-PURIFYING RESPIRATOR SUITABLE FOR
ORGANIC VAPORS AND PARTICULATES
FOR QUESTIONS ABOUT SUITABILITY FOR A SPECIFIC APPLICATION, CONSULT WITH
YOUR RESPIRATOR MANUFACTURER.
| SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES | |
9.1. INFORMATION ON BASIC PHYSICAL AND CHEMICAL PROPERTIES:
GENERAL PHYSICAL FORM: LIQUID
SPECIFIC PHYSICAL FORM: PASTE
ODOR, COLOR, GRADE: MILD ODOR, WHITE
ODOR THRESHOLD: NO DATA AVAILABLE
PH: NOT APPLICABLE
MELTING POINT: NOT APPLICABLE
BOILING POINT: >=180 DEG. F
FLASH POINT: 180 DEG. F [TEST METHOD: CLOSED CUP]
EVAPORATION RATE: NO DATA AVAILABLE
FLAMMABILITY (SOLID, GAS): NOT APPLICABLE
FLAMMABLE LIMITS(LEL): NO DATA AVAILABLE
FLAMMABLE LIMITS(UEL): NO DATA AVAILABLE
VAPOR PRESSURE: <=0.1 MMHg
VAPOR DENSITY: NO DATA AVAILABLE
DENSITY: 1.063 G/ML
SPECIFIC GRAVITY: 1.063 [REF STD: WATER=1]
SOLUBILITY IN WATER: SLIGHT (LESS THAN 10%)
SOLUBILITY- NON-WATER: NO DATA AVAILABLE
PARTITION COEFFICIENT N-OCTANOL/WATER: NO DATA AVAILABLE
AUTOIGNITION TEMPERATURE: NO DATA AVAILABLE
DECOMPOSITION TEMPERATURE: NO DATA AVAILABLE
VISCOSITY: 49,000 CENTIPOISE [@ 73.4 DEG. F ]
HAZARDOUS AIR POLLUTANTS: 0% WEIGHT [TEST METHOD: CALCULATED]
VOC LESS H2O & EXEMPT SOLVENTS:
7.8 G/L [DETAILS: WHEN USED AS INTENDED WITH PART B]
VOC LESS H2O & EXEMPT SOLVENTS:
0.8% [DETAILS: WHEN USED AS INTENDED WITH PART B]
VOC LESS H2O & EXEMPT SOLVENTS:
65 G/L [TEST METHOD: CALCULATED SCAQMD RULE 443.1] [DETAILS: AS SUPPLIED]
| SECTION 10: STABILITY AND REACTIVITY | |
10.1. REACTIVITY:
THIS MATERIAL MAY BE REACTIVE WITH CERTAIN AGENTS UNDER CERTAIN
CONDITIONS - SEE THE REMAINING HEADINGS IN THIS SECTION.
10.2. CHEMICAL STABILITY: STABLE.
10.3. POSSIBILITY OF HAZARDOUS REACTIONS:
HAZARDOUS POLYMERIZATION WILL NOT OCCUR.
10.4. CONDITIONS TO AVOID:
HEAT
SPARKS AND/OR FLAMES
10.5. INCOMPATIBLE MATERIALS:
STRONG ACIDS
STRONG OXIDIZING AGENTS
10.6. HAZARDOUS DECOMPOSITION PRODUCTS:
SUBSTANCE CONDITION
NONE KNOWN.
REFER TO SECTION 5.2 FOR HAZARDOUS DECOMPOSITION PRODUCTS DURING
COMBUSTION.
| SECTION 11: TOXICOLOGICAL INFORMATION | |
THE INFORMATION BELOW MAY NOT BE CONSISTENT WITH THE MATERIAL
CLASSIFICATION IN SECTION 2 IF SPECIFIC INGREDIENT CLASSIFICATIONS ARE
MANDATED BY A COMPETENT AUTHORITY. IN ADDITION, TOXICOLOGICAL DATA ON
INGREDIENTS MAY NOT BE REFLECTED IN THE MATERIAL CLASSIFICATION AND/OR THE
SIGNS AND SYMPTOMS OF EXPOSURE, BECAUSE AN INGREDIENT MAY BE PRESENT BELOW
THE THRESHOLD FOR LABELING, AN INGREDIENT MAY NOT BE AVAILABLE FOR
EXPOSURE, OR THE DATA MAY NOT BE RELEVANT TO THE MATERIAL AS A WHOLE.
11.1. INFORMATION ON TOXICOLOGICAL EFFECTS:
SIGNS AND SYMPTOMS OF EXPOSURE:
BASED ON TEST DATA AND/OR INFORMATION ON THE COMPONENTS, THIS MATERIAL MAY
PRODUCE THE FOLLOWING HEALTH EFFECTS:
INHALATION:
RESPIRATORY TRACT IRRITATION:
SIGNS/SYMPTOMS MAY INCLUDE COUGH, SNEEZING, NASAL DISCHARGE, HEADACHE,
HOARSENESS, AND NOSE AND THROAT PAIN.
ALLERGIC RESPIRATORY REACTION:
SIGNS/SYMPTOMS MAY INCLUDE DIFFICULTY BREATHING, WHEEZING, COUGH, AND
TIGHTNESS OF CHEST.
SKIN CONTACT:
MILD SKIN IRRITATION:
SIGNS/SYMPTOMS MAY INCLUDE LOCALIZED REDNESS, SWELLING, ITCHING, AND
DRYNESS.
ALLERGIC SKIN REACTION (NON-PHOTO INDUCED):
SIGNS/SYMPTOMS MAY INCLUDE REDNESS, SWELLING, BLISTERING, AND ITCHING.
EYE CONTACT:
CORROSIVE (EYE BURNS):
SIGNS/SYMPTOMS MAY INCLUDE CLOUDY APPEARANCE OF THE CORNEA, CHEMICAL BURNS,
SEVERE PAIN, TEARING, ULCERATIONS, SIGNIFICANTLY IMPAIRED VISION OR
COMPLETE LOSS OF VISION.
INGESTION:
MAY BE HARMFUL IF SWALLOWED.
GASTROINTESTINAL IRRITATION:
SIGNS/SYMPTOMS MAY INCLUDE ABDOMINAL PAIN, STOMACH UPSET, NAUSEA, VOMITING
AND DIARRHEA.
ADDITIONAL HEALTH EFFECTS:
GENOTOXICITY:
GENOTOXICITY AND MUTAGENICITY:
MAY INTERACT WITH GENETIC MATERIAL AND POSSIBLY ALTER GENE EXPRESSION.
TOXICOLOGICAL DATA:
IF A COMPONENT IS DISCLOSED IN SECTION 3 BUT DOES NOT APPEAR IN A TABLE
BELOW, EITHER NO DATA ARE AVAILABLE FOR THAT ENDPOINT OR THE DATA ARE NOT
SUFFICIENT FOR CLASSIFICATION.
ACUTE TOXICITY:
NAME ROUTE SPECIES VALUE
OVERALL PRODUCT INGESTION NO DATA AVAILABLE;
CALCULATED ATE:
2,000 - 5,000 MG/KG
POLYFUNCTIONAL AZIRIDINE DERMAL RABBIT LD50: >3,000 MG/KG
POLYFUNCTIONAL AZIRIDINE INHALATION- RAT LC50: 0.252 MG/L
DUST/MIST
(4 HOURS)
POLYFUNCTIONAL AZIRIDINE INGESTION RAT LD50: 3,038 MG/KG
AMORPHOUS SILICA DERMAL RABBIT LD50: >5,000 MG/KG
AMORPHOUS SILICA INHALATION- RAT LC50: >0.691 MG/L
DUST/MIST
(4 HOURS)
AMORPHOUS SILICA INGESTION RAT LD50: >5,110 MG/KG
ATE = ACUTE TOXICITY ESTIMATE
SKIN CORROSION/IRRITATION:
NAME SPECIES VALUE
POLYFUNCTIONAL AZIRIDINE RABBIT MILD IRRITANT
AMORPHOUS SILICA RABBIT NO SIGNIFICANT IRRITATION
SERIOUS EYE DAMAGE/IRRITATION:
NAME SPECIES VALUE
POLYFUNCTIONAL AZIRIDINE RABBIT CORROSIVE
AMORPHOUS SILICA RABBIT NO SIGNIFICANT IRRITATION
SKIN SENSITIZATION:
NAME SPECIES VALUE
POLYFUNCTIONAL AZIRIDINE HUMAN AND SENSITIZING
ANIMAL
AMORPHOUS SILICA HUMAN AND NOT SENSITIZING
ANIMAL
RESPIRATORY SENSITIZATION:
NAME SPECIES VALUE
POLYFUNCTIONAL AZIRIDINE HUMAN SENSITIZING
GERM CELL MUTAGENICITY:
NAME ROUTE VALUE
POLYFUNCTIONAL AZIRIDINE IN VIVO MUTAGENIC
AMORPHOUS SILICA IN VITRO NOT MUTAGENIC
CARCINOGENICITY:
NAME ROUTE SPECIES VALUE
AMORPHOUS SILICA NOT SPECIFIED MOUSE SOME POSITIVE DATA EXIST, BUT
THE DATA ARE NOT SUFFICIENT
FOR CLASSIFICATION
REPRODUCTIVE TOXICITY:
REPRODUCTIVE AND/OR DEVELOPMENTAL EFFECTS:
NAME ROUTE VALUE
AMORPHOUS SILICA INGESTION NOT TOXIC TO FEMALE REPRODUCTION
AMORPHOUS SILICA INGESTION NOT TOXIC TO MALE REPRODUCTION
AMORPHOUS SILICA INGESTION NOT TOXIC TO DEVELOPMENT
NAME SPECIES TEST RESULT EXPOSURE DURATION
AMORPHOUS SILICA RAT NOAEL: 509 MG/KG/DAY 1 GENERATION
AMORPHOUS SILICA RAT NOAEL: 497 MG/KG/DAY 1 GENERATION
AMORPHOUS SILICA RAT NOAEL: 1,350 MG/KG/DAY DURING
ORGANOGENESIS
TARGET ORGAN(S):
SPECIFIC TARGET ORGAN TOXICITY - SINGLE EXPOSURE:
NAME ROUTE TARGET ORGAN(S) VALUE
POLYFUNCTIONAL INHALATION RESPIRATORY SOME POSITIVE DATA EXIST,
AZIRIDINE IRRITATION BUT THE DATA ARE NOT
SUFFICIENT FOR
CLASSIFICATION
NAME SPECIES TEST RESULT EXPOSURE DURATION
POLYFUNCTIONAL RAT NOAEL: NOT AVAILABLE 4 HOURS
AZIRIDINE
SPECIFIC TARGET ORGAN TOXICITY - REPEATED EXPOSURE:
NAME ROUTE TARGET ORGAN(S) VALUE
AMORPHOUS SILICA INHALATION RESPIRATORY SYSTEM ALL DATA ARE NEGATIVE
SILICOSIS
NAME SPECIES TEST RESULT EXPOSURE DURATION
AMORPHOUS SILICA HUMAN NOAEL: NOT AVAILABLE OCCUPATIONAL
EXPOSURE
ASPIRATION HAZARD:
FOR THE COMPONENT/COMPONENTS, EITHER NO DATA ARE CURRENTLY AVAILABLE OR
THE DATA ARE NOT SUFFICIENT FOR CLASSIFICATION.
PLEASE CONTACT THE ADDRESS OR PHONE NUMBER LISTED IN SECTION 1 OF THIS
SDS FOR ADDITIONAL TOXICOLOGICAL INFORMATION ON THIS MATERIAL AND/OR
ITS COMPONENTS.
| SECTION 12: ECOLOGICAL INFORMATION | |
ECOTOXICOLOGICAL INFORMATION:
PLEASE CONTACT THE ADDRESS OR PHONE NUMBER LISTED IN SECTION 1 OF THIS
SDS FOR ADDITIONAL ECOTOXICOLOGICAL INFORMATION ON THIS MATERIAL AND/OR
ITS COMPONENTS.
CHEMICAL FATE INFORMATION:
PLEASE CONTACT THE ADDRESS OR PHONE NUMBER LISTED IN SECTION 1 OF THIS
SDS FOR ADDITIONAL CHEMICAL FATE INFORMATION ON THIS MATERIAL AND/OR
ITS COMPONENTS.
| SECTION 13: DISPOSAL CONSIDERATIONS | |
13.1. DISPOSAL METHODS:
DISPOSE OF CONTENTS/ CONTAINER IN ACCORDANCE WITH THE
LOCAL/REGIONAL/NATIONAL/INTERNATIONAL REGULATIONS.
DISPOSE OF COMPLETELY CURED (OR POLYMERIZED) MATERIAL IN A PERMITTED
INDUSTRIAL WASTE FACILITY. AS A DISPOSAL ALTERNATIVE, INCINERATE UNCURED
PRODUCT IN A PERMITTED WASTE INCINERATION FACILITY. PROPER DESTRUCTION MAY
REQUIRE THE USE OF ADDITIONAL FUEL DURING INCINERATION PROCESSES. IF NO
OTHER DISPOSAL OPTIONS ARE AVAILABLE, WASTE PRODUCT THAT HAS BEEN
COMPLETELY CURED OR POLYMERIZED MAY BE PLACED IN A LANDFILL PROPERLY
DESIGNED FOR INDUSTRIAL WASTE. EMPTY DRUMS/BARRELS/CONTAINERS USED FOR
TRANSPORTING AND HANDLING HAZARDOUS CHEMICALS (CHEMICAL
SUBSTANCES/MIXTURES/PREPARATIONS CLASSIFIED AS HAZARDOUS AS PER APPLICABLE
REGULATIONS) SHALL BE CONSIDERED, STORED, TREATED & DISPOSED OF AS
HAZARDOUS WASTES UNLESS OTHERWISE DEFINED BY APPLICABLE WASTE REGULATIONS.
CONSULT WITH THE RESPECTIVE REGULATING AUTHORITIES TO DETERMINE THE
AVAILABLE TREATMENT AND DISPOSAL FACILITIES.
EPA HAZARDOUS WASTE NUMBER (RCRA): NOT REGULATED
| SECTION 14: TRANSPORT INFORMATION | |
FOR TRANSPORT INFORMATION, PLEASE VISIT:
HTTP://3M.COM/TRANSPORTINFO OR CALL 1-800-364-3577 OR 651-737-6501.
| SECTION 15: REGULATORY INFORMATION | |
15.1. US FEDERAL REGULATIONS: CONTACT 3M FOR MORE INFORMATION.
311/312 HAZARD CATEGORIES:
FIRE HAZARD: YES
PRESSURE HAZARD: NO
REACTIVITY HAZARD: NO
IMMEDIATE HAZARD: YES
DELAYED HAZARD: YES
15.2. STATE REGULATIONS: CONTACT 3M FOR MORE INFORMATION.
15.3. CHEMICAL INVENTORIES:
THE COMPONENTS OF THIS PRODUCT ARE IN COMPLIANCE WITH THE CHEMICAL
NOTIFICATION REQUIREMENTS OF TSCA. ONE OR MORE OF THE COMPONENTS IN THIS
MATERIAL IS NOT LISTED ON THE TSCA INVENTORY, BUT IS APPROVED FOR SPECIFIC
COMMERCIAL USE(S) UNDER A US EPA LOW VOLUME EXEMPTION.
CONTACT 3M FOR MORE INFORMATION.
15.4. INTERNATIONAL REGULATIONS: CONTACT 3M FOR MORE INFORMATION.
THIS SDS HAS BEEN PREPARED TO MEET THE U.S. OSHA HAZARD COMMUNICATION
STANDARD, 29 CFR 1910.1200.
| SECTION 16: OTHER INFORMATION | |
NFPA HAZARD CLASSIFICATION:
HEALTH 3
FLAMMABILITY 2
INSTABILITY 0
SPECIAL HAZARDS NONE
NATIONAL FIRE PROTECTION ASSOCIATION (NFPA) HAZARD RATINGS ARE DESIGNED FOR
USE BY EMERGENCY RESPONSE PERSONNEL TO ADDRESS THE HAZARDS THAT ARE
PRESENTED BY SHORT-TERM, ACUTE EXPOSURE TO A MATERIAL UNDER CONDITIONS OF
FIRE, SPILL, OR SIMILAR EMERGENCIES. HAZARD RATINGS ARE PRIMARILY BASED ON
THE INHERENT PHYSICAL AND TOXIC PROPERTIES OF THE MATERIAL BUT ALSO INCLUDE
THE TOXIC PROPERTIES OF COMBUSTION OR DECOMPOSITION PRODUCTS THAT ARE KNOWN
TO BE GENERATED IN SIGNIFICANT QUANTITIES.
DOCUMENT GROUP: 18-8243-0
ISSUE DATE: 04/16/15
VERSION NUMBER: 3.00
SUPERCEDES DATE: 01/04/12
DISCLAIMER:
THE INFORMATION IN THIS SAFETY DATA SHEET (SDS) IS BELIEVED TO BE CORRECT
AS OF THE DATE ISSUED. 3M MAKES NO WARRANTIES, EXPRESSED OR IMPLIED,
INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE OR COURSE OF PERFORMANCE OR USAGE OF
TRADE. USER IS RESPONSIBLE FOR DETERMINING WHETHER THE 3M PRODUCT IS FIT
FOR A PARTICULAR PURPOSE AND SUITABLE FOR USER'S METHOD OF USE OR
APPLICATION. GIVEN THE VARIETY OF FACTORS THAT CAN AFFECT THE USE AND
APPLICATION OF A 3M PRODUCT, SOME OF WHICH ARE UNIQUELY WITHIN THE USER'S
KNOWLEDGE AND CONTROL, IT IS ESSENTIAL THAT THE USER EVALUATE THE 3M
PRODUCT TO DETERMINE WHETHER IT IS FIT FOR A PARTICULAR PURPOSE AND
SUITABLE FOR USER'S METHOD OF USE OR APPLICATION.
3M PROVIDES INFORMATION IN ELECTRONIC FORM AS A SERVICE TO ITS CUSTOMERS.
DUE TO THE REMOTE POSSIBILITY THAT ELECTRONIC TRANSFER MAY HAVE RESULTED IN
ERRORS, OMISSIONS OR ALTERATIONS IN THIS INFORMATION, 3M MAKES NO
REPRESENTATIONS AS TO ITS COMPLETENESS OR ACCURACY. IN ADDITION,
INFORMATION OBTAINED FROM A DATABASE MAY NOT BE AS CURRENT AS THE
INFORMATION IN THE SDS AVAILABLE DIRECTLY FROM 3M
3M USA SDSS ARE AVAILABLE AT WWW.3M.COM
3M(TM) SCOTCH-WELD(TM) STRUCTURAL PLASTIC ADHESIVE DP8005 BLACK, PART B
04/01/16
3M
SAFETY DATA SHEET
COPYRIGHT, 2016, 3M COMPANY.
ALL RIGHTS RESERVED. COPYING AND/OR DOWNLOADING OF THIS INFORMATION FOR
THE PURPOSE OF PROPERLY UTILIZING 3M PRODUCTS IS ALLOWED PROVIDED THAT:
(1) THE INFORMATION IS COPIED IN FULL WITH NO CHANGES UNLESS PRIOR WRITTEN
AGREEMENT IS OBTAINED FROM 3M, AND
(2) NEITHER THE COPY NOR THE ORIGINAL IS RESOLD OR OTHERWISE DISTRIBUTED
WITH THE INTENTION OF EARNING A PROFIT THEREON.
DOCUMENT GROUP: 28-2531-3
ISSUE DATE: 04/01/16
VERSION NUMBER: 3.01
SUPERCEDES DATE: 04/16/15
| SECTION 1: IDENTIFICATION | |
1.1. PRODUCT IDENTIFIER:
3M(TM) SCOTCH-WELD(TM) STRUCTURAL PLASTIC ADHESIVE DP8005 BLACK, PART B
1.2. RECOMMENDED USE AND RESTRICTIONS ON USE:
RECOMMENDED USE: ADHESIVE
1.3. SUPPLIER'S DETAILS:
MANUFACTURER: 3M
DIVISION: INDUSTRIAL ADHESIVES AND TAPES DIVISION
ADDRESS:
3M CENTER
ST. PAUL, MN 55144-1000
USA
TELEPHONE: 1-888-3M HELPS (1-888-364-3577)
1.4. EMERGENCY TELEPHONE NUMBER:
1-800-364-3577 OR (651) 737-6501 (24 HOURS)
| SECTION 2: HAZARD IDENTIFICATION | |
2.1. HAZARD CLASSIFICATION:
SERIOUS EYE DAMAGE/IRRITATION: CATEGORY 2A.
SKIN CORROSION/IRRITATION: CATEGORY 2.
SKIN SENSITIZER: CATEGORY 1.
2.2. LABEL ELEMENTS:
SIGNAL WORD: WARNING
SYMBOLS: EXCLAMATION MARK
PICTOGRAMS: EXCLAMATION MARK
HAZARD STATEMENTS:
CAUSES SERIOUS EYE IRRITATION.
CAUSES SKIN IRRITATION.
MAY CAUSE AN ALLERGIC SKIN REACTION.
PRECAUTIONARY STATEMENTS:
PREVENTION:
AVOID BREATHING DUST/FUME/GAS/MIST/VAPORS/SPRAY.
WEAR PROTECTIVE GLOVES AND EYE/FACE PROTECTION.
WASH THOROUGHLY AFTER HANDLING.
CONTAMINATED WORK CLOTHING MUST NOT BE ALLOWED OUT OF THE WORKPLACE.
RESPONSE:
IF IN EYES:
RINSE CAUTIOUSLY WITH WATER FOR SEVERAL MINUTES. REMOVE CONTACT LENSES, IF
PRESENT AND EASY TO DO.
CONTINUE RINSING.
IF EYE IRRITATION PERSISTS: GET MEDICAL ADVICE/ATTENTION.
IF ON SKIN: WASH WITH PLENTY OF SOAP AND WATER.
IF SKIN IRRITATION OR RASH OCCURS:
GET MEDICAL ADVICE/ATTENTION.
TAKE OFF CONTAMINATED CLOTHING AND WASH IT BEFORE REUSE.
DISPOSAL:
DISPOSE OF CONTENTS/CONTAINER IN ACCORDANCE WITH APPLICABLE
LOCAL/REGIONAL/NATIONAL/INTERNATIONAL REGULATIONS.
2.3. HAZARDS NOT OTHERWISE CLASSIFIED: NONE.
| SECTION 3: COMPOSITION/INFORMATION ON INGREDIENTS | |
INGREDIENT C.A.S. NO. % BY WT
TETRAHYDROFURFURYL METHACRYLATE 2455-24-5 30 - 70 TRADE SECRET*
2-ETHYLHEXYL METHACRYLATE 688-84-6 10 - 30 TRADE SECRET*
ACRYLATE POLYMER TRADE SECRET* 10 - 30 TRADE SECRET*
(NJTS REG NO 04499600-6806)
BUTANOIC ACID, 3-OXO-, 21282-97-3 1 - 15 TRADE SECRET*
2-[(2-METHYL-1-OXO-2-
PROPENYL)OXY]ETHYL ESTER
GLASS SPHERES 68131-74-8 1 - 10 TRADE SECRET*
IMPACT MODIFIER 20882-04-6 1 - 10 TRADE SECRET*
SUCCINIC ANHYDRIDE 108-30-5 <=0.7 TRADE SECRET*
2-HYDROXYETHYL METHACRYLATE 868-77-9 <=0.3 TRADE SECRET*
CARBON BLACK 1333-86-4 <=0.3 TRADE SECRET*
METHYL METHACRYLATE 80-62-6 <=0.3 TRADE SECRET*
NJTS OR NJTSRN: NEW JERSEY TRADE SECRET REGISTRY NUMBER.
*THE SPECIFIC CHEMICAL IDENTITY AND/OR EXACT PERCENTAGE (CONCENTRATION) OF
THIS COMPOSITION HAS BEEN WITHHELD AS A TRADE SECRET.
| SECTION 4: FIRST AID MEASURES | |
4.1. DESCRIPTION OF FIRST AID MEASURES:
INHALATION:
REMOVE PERSON TO FRESH AIR. IF YOU FEEL UNWELL, GET MEDICAL ATTENTION.
SKIN CONTACT:
IMMEDIATELY WASH WITH SOAP AND WATER. REMOVE CONTAMINATED CLOTHING AND WASH
BEFORE REUSE. IF SIGNS/SYMPTOMS DEVELOP, GET MEDICAL ATTENTION.
EYE CONTACT:
IMMEDIATELY FLUSH WITH LARGE AMOUNTS OF WATER. REMOVE CONTACT LENSES IF
EASY TO DO. CONTINUE RINSING. GET MEDICAL ATTENTION.
IF SWALLOWED: RINSE MOUTH. IF YOU FEEL UNWELL, GET MEDICAL ATTENTION.
4.2. MOST IMPORTANT SYMPTOMS AND EFFECTS, BOTH ACUTE AND DELAYED:
SEE SECTION 11.1. INFORMATION ON TOXICOLOGICAL EFFECTS.
4.3. INDICATION OF ANY IMMEDIATE MEDICAL ATTENTION AND SPECIAL TREATMENT
REQUIRED: NOT APPLICABLE
| SECTION 5: FIRE-FIGHTING MEASURES | |
5.1. SUITABLE EXTINGUISHING MEDIA:
IN CASE OF FIRE:
USE A CARBON DIOXIDE OR DRY CHEMICAL EXTINGUISHER TO EXTINGUISH.
5.2. SPECIAL HAZARDS ARISING FROM THE SUBSTANCE OR MIXTURE:
NONE INHERENT IN THIS PRODUCT.
HAZARDOUS DECOMPOSITION OR BY-PRODUCTS:
SUBSTANCE CONDITION
ALDEHYDES DURING COMBUSTION
CARBON MONOXIDE DURING COMBUSTION
CARBON DIOXIDE DURING COMBUSTION
IRRITANT VAPORS OR GASES DURING COMBUSTION
OXIDES OF NITROGEN DURING COMBUSTION
5.3. SPECIAL PROTECTIVE ACTIONS FOR FIRE-FIGHTERS:
NO SPECIAL PROTECTIVE ACTIONS FOR FIRE-FIGHTERS ARE ANTICIPATED.
| SECTION 6: ACCIDENTAL RELEASE MEASURES | |
6.1. PERSONAL PRECAUTIONS, PROTECTIVE EQUIPMENT AND EMERGENCY PROCEDURES:
EVACUATE AREA. VENTILATE THE AREA WITH FRESH AIR. FOR LARGE SPILL, OR
SPILLS IN CONFINED SPACES, PROVIDE MECHANICAL VENTILATION TO DISPERSE OR
EXHAUST VAPORS, IN ACCORDANCE WITH GOOD INDUSTRIAL HYGIENE PRACTICE.
REFER TO OTHER SECTIONS OF THIS SDS FOR INFORMATION REGARDING PHYSICAL AND
HEALTH HAZARDS, RESPIRATORY PROTECTION, VENTILATION, AND PERSONAL
PROTECTIVE EQUIPMENT.
6.2. ENVIRONMENTAL PRECAUTIONS:
AVOID RELEASE TO THE ENVIRONMENT. FOR LARGER SPILLS, COVER DRAINS AND BUILD
DIKES TO PREVENT ENTRY INTO SEWER SYSTEMS OR BODIES OF WATER.
6.3. METHODS AND MATERIAL FOR CONTAINMENT AND CLEANING UP:
CONTAIN SPILL. WORKING FROM AROUND THE EDGES OF THE SPILL INWARD, COVER
WITH BENTONITE, VERMICULITE, OR COMMERCIALLY AVAILABLE INORGANIC ABSORBENT
MATERIAL. MIX IN SUFFICIENT ABSORBENT UNTIL IT APPEARS DRY. REMEMBER,
ADDING AN ABSORBENT MATERIAL DOES NOT REMOVE A PHYSICAL, HEALTH, OR
ENVIRONMENTAL HAZARD. COLLECT AS MUCH OF THE SPILLED MATERIAL AS POSSIBLE.
PLACE IN A CLOSED CONTAINER APPROVED FOR TRANSPORTATION BY APPROPRIATE
AUTHORITIES. CLEAN UP RESIDUE WITH AN APPROPRIATE SOLVENT SELECTED BY A
QUALIFIED AND AUTHORIZED PERSON. VENTILATE THE AREA WITH FRESH AIR.
READ AND FOLLOW SAFETY PRECAUTIONS ON THE SOLVENT LABEL AND SDS. SEAL THE
CONTAINER. DISPOSE OF COLLECTED MATERIAL AS SOON AS POSSIBLE.
| SECTION 7: HANDLING AND STORAGE | |
7.1. PRECAUTIONS FOR SAFE HANDLING:
AVOID BREATHING DUST/FUME/GAS/MIST/VAPORS/SPRAY. DO NOT GET IN EYES, ON
SKIN, OR ON CLOTHING. DO NOT EAT, DRINK OR SMOKE WHEN USING THIS PRODUCT.
WASH THOROUGHLY AFTER HANDLING. CONTAMINATED WORK CLOTHING SHOULD NOT BE
ALLOWED OUT OF THE WORKPLACE. AVOID RELEASE TO THE ENVIRONMENT. WASH
CONTAMINATED CLOTHING BEFORE REUSE.
7.2. CONDITIONS FOR SAFE STORAGE INCLUDING ANY INCOMPATIBILITIES:
STORE AWAY FROM HEAT. STORE AWAY FROM ACIDS.
| SECTION 8: EXPOSURE CONTROLS/PERSONAL PROTECTION | |
8.1. CONTROL PARAMETERS:
OCCUPATIONAL EXPOSURE LIMITS:
IF A COMPONENT IS DISCLOSED IN SECTION 3 BUT DOES NOT APPEAR IN THE TABLE
BELOW, AN OCCUPATIONAL EXPOSURE LIMIT IS NOT AVAILABLE FOR THE COMPONENT.
INGREDIENT C.A.S. NO. AGENCY LIMIT TYPE ADDITIONAL COMMENTS
CARBON BLACK 1333-86-4 ACGIH TWA(INHALABLE A3:
FRACTION): CONFIRMED ANIMAL
3 MG/M3 CARCIN.
CARBON BLACK 1333-86-4 CMRG TWA: 0.5 MG/M3
CARBON BLACK 1333-86-4 OSHA TWA: 3.5 MG/M3
METHYL 80-62-6 ACGIH TWA: 50 PPM DERMAL SENSITIZER, A4:
METHACRYLATE STEL: 100 PPM NOT CLASS. AS HUMAN
CARCIN
METHYL 80-62-6 OSHA TWA:
METHACRYLATE 410 MG/M3
(100 PPM)
ACGIH: AMERICAN CONFERENCE OF GOVERNMENTAL INDUSTRIAL HYGIENISTS
AIHA: AMERICAN INDUSTRIAL HYGIENE ASSOCIATION
CMRG: CHEMICAL MANUFACTURER'S RECOMMENDED GUIDELINES
OSHA:
UNITED STATES DEPARTMENT OF LABOR - OCCUPATIONAL SAFETY AND HEALTH
ADMINISTRATION
TWA: TIME-WEIGHTED-AVERAGE
STEL: SHORT TERM EXPOSURE LIMIT
CEIL: CEILING
8.2. EXPOSURE CONTROLS:
8.2.1. ENGINEERING CONTROLS:
USE GENERAL DILUTION VENTILATION AND/OR LOCAL EXHAUST VENTILATION TO
CONTROL AIRBORNE EXPOSURES TO BELOW RELEVANT EXPOSURE LIMITS AND/OR CONTROL
DUST/FUME/GAS/MIST/VAPORS/SPRAY. IF VENTILATION IS NOT ADEQUATE, USE
RESPIRATORY PROTECTION EQUIPMENT.
8.2.2. PERSONAL PROTECTIVE EQUIPMENT (PPE):
EYE/FACE PROTECTION:
SELECT AND USE EYE/FACE PROTECTION TO PREVENT CONTACT BASED ON THE RESULTS
OF AN EXPOSURE ASSESSMENT.
THE FOLLOWING EYE/FACE PROTECTION(S) ARE RECOMMENDED:
INDIRECT VENTED GOGGLES
SKIN/HAND PROTECTION:
SELECT AND USE GLOVES AND/OR PROTECTIVE CLOTHING APPROVED TO RELEVANT LOCAL
STANDARDS TO PREVENT SKIN CONTACT BASED ON THE RESULTS OF AN EXPOSURE
ASSESSMENT. SELECTION SHOULD BE BASED ON USE FACTORS SUCH AS EXPOSURE
LEVELS, CONCENTRATION OF THE SUBSTANCE OR MIXTURE, FREQUENCY AND DURATION,
PHYSICAL CHALLENGES SUCH AS TEMPERATURE EXTREMES, AND OTHER USE CONDITIONS.
CONSULT WITH YOUR GLOVE AND/OR PROTECTIVE CLOTHING MANUFACTURER FOR
SELECTION OF APPROPRIATE COMPATIBLE GLOVES/PROTECTIVE CLOTHING.
NOTE:
NITRILE GLOVES MAY BE WORN OVER POLYMER LAMINATE GLOVES TO IMPROVE
DEXTERITY.
GLOVES MADE FROM THE FOLLOWING MATERIAL(S) ARE RECOMMENDED:
POLYMER LAMINATE
RESPIRATORY PROTECTION:
AN EXPOSURE ASSESSMENT MAY BE NEEDED TO DECIDE IF A RESPIRATOR IS REQUIRED.
IF A RESPIRATOR IS NEEDED, USE RESPIRATORS AS PART OF A FULL RESPIRATORY
PROTECTION PROGRAM. BASED ON THE RESULTS OF THE EXPOSURE ASSESSMENT, SELECT
FROM THE FOLLOWING RESPIRATOR TYPE(S) TO REDUCE INHALATION EXPOSURE:
HALF FACEPIECE OR FULL FACEPIECE AIR-PURIFYING RESPIRATOR SUITABLE FOR
ORGANIC VAPORS AND PARTICULATES
FOR QUESTIONS ABOUT SUITABILITY FOR A SPECIFIC APPLICATION, CONSULT WITH
YOUR RESPIRATOR MANUFACTURER.
| SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES | |
9.1. INFORMATION ON BASIC PHYSICAL AND CHEMICAL PROPERTIES:
GENERAL PHYSICAL FORM: LIQUID
SPECIFIC PHYSICAL FORM: PASTE
ODOR, COLOR, GRADE: BLACK, MILD ACRYLIC ODOR
ODOR THRESHOLD: NO DATA AVAILABLE
PH: NOT APPLICABLE
MELTING POINT: NOT APPLICABLE
BOILING POINT: >=180 DEG. F
FLASH POINT: 218 DEG. F [TEST METHOD: CLOSED CUP]
EVAPORATION RATE: NO DATA AVAILABLE
FLAMMABILITY (SOLID, GAS): NOT APPLICABLE
FLAMMABLE LIMITS(LEL): NO DATA AVAILABLE
FLAMMABLE LIMITS(UEL): NO DATA AVAILABLE
VAPOR PRESSURE: <=0.1 MMHg [@ 20 DEG. C]
VAPOR DENSITY: NO DATA AVAILABLE
DENSITY: 0.984 G/ML
SPECIFIC GRAVITY: 0.984 [REF STD: WATER=1]
SOLUBILITY IN WATER: SLIGHT (LESS THAN 10%)
SOLUBILITY- NON-WATER: NO DATA AVAILABLE
PARTITION COEFFICIENT N-OCTANOL/ WATER: NO DATA AVAILABLE
AUTOIGNITION TEMPERATURE: NO DATA AVAILABLE
DECOMPOSITION TEMPERATURE: NO DATA AVAILABLE
VISCOSITY: 25,000 CENTIPOISE
HAZARDOUS AIR POLLUTANTS: <= 0.2% WEIGHT [TEST METHOD: CALCULATED]
MOLECULAR WEIGHT: NO DATA AVAILABLE
VOC LESS H2O & EXEMPT SOLVENTS:
7.3 G/L [DETAILS: WHEN USED AS INTENDED WITH PART A]
VOC LESS H2O & EXEMPT SOLVENTS:
0.8% [DETAILS: WHEN USED AS INTENDED WITH PART A]
VOC LESS H2O & EXEMPT SOLVENTS:
392 G/L [TEST METHOD: CALCULATED SCAQMD RULE 443.1] [DETAILS: AS SUPPLIED]
| SECTION 10: STABILITY AND REACTIVITY | |
10.1. REACTIVITY:
THIS MATERIAL MAY BE REACTIVE WITH CERTAIN AGENTS UNDER CERTAIN
CONDITIONS - SEE THE REMAINING HEADINGS IN THIS SECTION.
10.2. CHEMICAL STABILITY: STABLE.
10.3. POSSIBILITY OF HAZARDOUS REACTIONS:
HAZARDOUS POLYMERIZATION WILL NOT OCCUR.
10.4. CONDITIONS TO AVOID: HEAT
10.5. INCOMPATIBLE MATERIALS: STRONG ACIDS
10.6. HAZARDOUS DECOMPOSITION PRODUCTS:
SUBSTANCE CONDITION
NONE KNOWN.
REFER TO SECTION 5.2 FOR HAZARDOUS DECOMPOSITION PRODUCTS DURING
COMBUSTION.
| SECTION 11: TOXICOLOGICAL INFORMATION | |
THE INFORMATION BELOW MAY NOT BE CONSISTENT WITH THE MATERIAL
CLASSIFICATION IN SECTION 2 IF SPECIFIC INGREDIENT CLASSIFICATIONS ARE
MANDATED BY A COMPETENT AUTHORITY. IN ADDITION, TOXICOLOGICAL DATA ON
INGREDIENTS MAY NOT BE REFLECTED IN THE MATERIAL CLASSIFICATION AND/OR THE
SIGNS AND SYMPTOMS OF EXPOSURE, BECAUSE AN INGREDIENT MAY BE PRESENT BELOW
THE THRESHOLD FOR LABELING, AN INGREDIENT MAY NOT BE AVAILABLE FOR
EXPOSURE, OR THE DATA MAY NOT BE RELEVANT TO THE MATERIAL AS A WHOLE.
11.1. INFORMATION ON TOXICOLOGICAL EFFECTS:
SIGNS AND SYMPTOMS OF EXPOSURE:
BASED ON TEST DATA AND/OR INFORMATION ON THE COMPONENTS, THIS MATERIAL MAY
PRODUCE THE FOLLOWING HEALTH EFFECTS:
INHALATION:
RESPIRATORY TRACT IRRITATION:
SIGNS/SYMPTOMS MAY INCLUDE COUGH, SNEEZING, NASAL DISCHARGE, HEADACHE,
HOARSENESS, AND NOSE AND THROAT PAIN.
SKIN CONTACT: MAY BE HARMFUL IN CONTACT WITH SKIN.
SKIN IRRITATION:
SIGNS/SYMPTOMS MAY INCLUDE LOCALIZED REDNESS, SWELLING, ITCHING, DRYNESS,
CRACKING, BLISTERING, AND PAIN.
ALLERGIC SKIN REACTION (NON-PHOTO INDUCED):
SIGNS/SYMPTOMS MAY INCLUDE REDNESS, SWELLING, BLISTERING, AND ITCHING.
EYE CONTACT:
SEVERE EYE IRRITATION:
SIGNS/SYMPTOMS MAY INCLUDE SIGNIFICANT REDNESS, SWELLING, PAIN, TEARING,
CLOUDY APPEARANCE OF THE CORNEA, AND IMPAIRED VISION.
INGESTION: MAY BE HARMFUL IF SWALLOWED.
GASTROINTESTINAL IRRITATION:
SIGNS/SYMPTOMS MAY INCLUDE ABDOMINAL PAIN, STOMACH UPSET, NAUSEA, VOMITING
AND DIARRHEA.
CARCINOGENICITY:
INGREDIENT CAS NO. CLASS DESCRIPTION REGULATION
CARBON BLACK 1333-86-4 GRP. 2B: INTERNATIONAL AGENCY FOR
POSSIBLE HUMAN CARC. RESEARCH ON CANCER
TOXICOLOGICAL DATA:
IF A COMPONENT IS DISCLOSED IN SECTION 3 BUT DOES NOT APPEAR IN A TABLE
BELOW, EITHER NO DATA ARE AVAILABLE FOR THAT ENDPOINT OR THE DATA ARE NOT
SUFFICIENT FOR CLASSIFICATION.
ACUTE TOXICITY:
NAME ROUTE SPECIES VALUE
OVERALL PRODUCT DERMAL NO DATA AVAILABLE;
CALCULATED ATE:
2,000 - 5,000 MG/KG
OVERALL PRODUCT INGESTION NO DATA AVAILABLE;
CALCULATED ATE:
2,000 - 5,000 MG/KG
TETRAHYDROFURFURYL DERMAL LD50:
METHACRYLATE ESTIMATED TO BE
2,000 - 5,000 MG/KG
TETRAHYDROFURFURYL INGESTION LD50:
METHACRYLATE ESTIMATED TO BE
2,000 - 5,000 MG/KG
2-ETHYLHEXYL DERMAL LD50:
METHACRYLATE ESTIMATED TO BE
>5,000 MG/KG
2-ETHYLHEXYL INGESTION RAT LD50: >2,000 MG/KG
METHACRYLATE
IMPACT MODIFIER DERMAL LD50:
ESTIMATED TO BE
2,000 - 5,000 MG/KG
IMPACT MODIFIER INGESTION LD50:
ESTIMATED TO BE
2,000 - 5,000 MG/KG
SUCCINIC ANHYDRIDE DERMAL LD50:
ESTIMATED TO BE
1,000 - 2,000 MG/KG
SUCCINIC ANHYDRIDE INGESTION RAT LD50: 1,510 MG/KG
2-HYDROXYETHYL DERMAL RABBIT LD50: >5,000 MG/KG
METHACRYLATE
2-HYDROXYETHYL INGESTION RAT LD50: 5,564 MG/KG
METHACRYLATE
CARBON BLACK DERMAL RABBIT LD50: >3,000 MG/KG
CARBON BLACK INGESTION RAT LD50: >8,000 MG/KG
METHYL DERMAL RABBIT LD50: >5,000 MG/KG
METHACRYLATE
METHYL INHALATION- RAT LC50: 29 MG/L
METHACRYLATE VAPOR
(4 HOURS)
METHYL INGESTION RAT LD50: 7,900 MG/KG
METHACRYLATE
ATE = ACUTE TOXICITY ESTIMATE
SKIN CORROSION/IRRITATION:
NAME SPECIES VALUE
TETRAHYDROFURFURYL METHACRYLATE SIMILAR IRRITANT
COMPOUNDS
2-ETHYLHEXYL METHACRYLATE RABBIT MINIMAL IRRITATION
IMPACT MODIFIER NOT IRRITANT
APPLICABLE
2-HYDROXYETHYL METHACRYLATE RABBIT MINIMAL IRRITATION
CARBON BLACK RABBIT NO SIGNIFICANT IRRITATION
METHYL METHACRYLATE HUMAN AND MILD IRRITANT
ANIMAL
SERIOUS EYE DAMAGE/IRRITATION:
NAME SPECIES VALUE
TETRAHYDROFURFURYL METHACRYLATE SIMILAR SEVERE IRRITANT
COMPOUNDS
2-ETHYLHEXYL METHACRYLATE RABBIT NO SIGNIFICANT IRRITATION
IMPACT MODIFIER NOT SEVERE IRRITANT
AVAILABLE
2-HYDROXYETHYL METHACRYLATE RABBIT MODERATE IRRITANT
CARBON BLACK RABBIT NO SIGNIFICANT IRRITATION
METHYL METHACRYLATE RABBIT MODERATE IRRITANT
SKIN SENSITIZATION:
NAME SPECIES VALUE
TETRAHYDROFURFURYL METHACRYLATE HUMAN SOME POSITIVE DATA EXIST,
BUT THE DATA ARE NOT
SUFFICIENT FOR
CLASSIFICATION
2-ETHYLHEXYL METHACRYLATE GUINEA SENSITIZING
PIG
IMPACT MODIFIER SIMILAR SENSITIZING
COMPOUNDS
2-HYDROXYETHYL METHACRYLATE HUMAN SENSITIZING
AND ANIMAL
METHYL METHACRYLATE HUMAN SENSITIZING
AND ANIMAL
RESPIRATORY SENSITIZATION:
NAME SPECIES VALUE
METHYL METHACRYLATE HUMAN SOME POSITIVE DATA EXIST, BUT THE DATA
ARE NOT SUFFICIENT FOR CLASSIFICATION
GERM CELL MUTAGENICITY:
NAME ROUTE VALUE
IMPACT MODIFIER IN VITRO NOT MUTAGENIC
2-HYDROXYETHYL METHACRYLATE IN VIVO NOT MUTAGENIC
2-HYDROXYETHYL METHACRYLATE IN VITRO SOME POSITIVE DATA EXIST, BUT THE
DATA ARE NOT SUFFICIENT FOR
CLASSIFICATION
CARBON BLACK IN VITRO NOT MUTAGENIC
CARBON BLACK IN VIVO SOME POSITIVE DATA EXIST, BUT THE
DATA ARE NOT SUFFICIENT FOR
CLASSIFICATION
METHYL METHACRYLATE IN VIVO NOT MUTAGENIC
METHYL METHACRYLATE IN VITRO SOME POSITIVE DATA EXIST, BUT THE
DATA ARE NOT SUFFICIENT FOR
CLASSIFICATION
CARCINOGENICITY:
NAME ROUTE SPECIES VALUE
CARBON BLACK DERMAL MOUSE NOT CARCINOGENIC
CARBON BLACK INGESTION MOUSE NOT CARCINOGENIC
CARBON BLACK INHALATION RAT CARCINOGENIC
METHYL METHACRYLATE INGESTION RAT NOT CARCINOGENIC
METHYL METHACRYLATE INHALATION HUMAN AND NOT CARCINOGENIC
ANIMAL
REPRODUCTIVE TOXICITY:
REPRODUCTIVE AND/OR DEVELOPMENTAL EFFECTS:
NAME ROUTE VALUE
2-HYDROXYETHYL METHACRYLATE INGESTION NOT TOXIC TO FEMALE REPRODUCTION
2-HYDROXYETHYL METHACRYLATE INGESTION NOT TOXIC TO MALE REPRODUCTION
2-HYDROXYETHYL METHACRYLATE INGESTION NOT TOXIC TO DEVELOPMENT
METHYL METHACRYLATE INHALATION NOT TOXIC TO MALE REPRODUCTION
METHYL METHACRYLATE INHALATION NOT TOXIC TO DEVELOPMENT
NAME SPECIES TEST RESULT EXPOSURE DURATION
2-HYDROXYETHYL METHACRYLATE RAT NOAEL: PREMATING &
1,000 MG/KG/DAY DURING GESTATION
2-HYDROXYETHYL METHACRYLATE RAT NOAEL: 49 DAYS
1,000 MG/KG/DAY
2-HYDROXYETHYL METHACRYLATE RAT NOAEL: PREMATING &
1,000 MG/KG/DAY DURING GESTATION
METHYL METHACRYLATE MOUSE NOAEL: 36.9 MG/L
METHYL METHACRYLATE RAT NOAEL: 8.3 MG/L DURING
ORGANOGENESIS
TARGET ORGAN(S):
SPECIFIC TARGET ORGAN TOXICITY - SINGLE EXPOSURE:
NAME ROUTE TARGET ORGAN(S) VALUE
TETRAHYDROFURFURYL INHALATION RESPIRATORY SOME POSITIVE DATA
METHACRYLATE IRRITATION EXIST, BUT THE DATA
ARE NOT SUFFICIENT
FOR CLASSIFICATION
IMPACT MODIFIER INHALATION RESPIRATORY SOME POSITIVE DATA
IRRITATION EXIST, BUT THE DATA
ARE NOT SUFFICIENT
FOR CLASSIFICATION
METHYL METHACRYLATE INHALATION RESPIRATORY MAY CAUSE RESPIRATORY
IRRITATION IRRITATION
NAME SPECIES TEST RESULT EXPOSURE DURATION
TETRAHYDROFURFURYL NOAEL: NOT AVAILABLE
METHACRYLATE
IMPACT MODIFIER NOAEL: NOT AVAILABLE
METHYL METHACRYLATE HUMAN NOAEL: NOT AVAILABLE OCCUPATIONAL
EXPOSURE
SPECIFIC TARGET ORGAN TOXICITY - REPEATED EXPOSURE:
NAME ROUTE TARGET ORGAN(S) VALUE
CARBON BLACK INHALATION PNEUMOCONIOSIS SOME POSITIVE DATA EXIST,
BUT THE DATA ARE NOT
SUFFICIENT FOR
CLASSIFICATION
METHYL DERMAL PERIPHERAL SOME POSITIVE DATA EXIST,
METHACRYLATE NERVOUS SYSTEM BUT THE DATA ARE NOT
SUFFICIENT FOR
CLASSIFICATION
METHYL INHALATION OLFACTORY SYSTEM CAUSES DAMAGE TO ORGANS
METHACRYLATE THROUGH PROLONGED OR
REPEATED EXPOSURE
METHYL INHALATION KIDNEY AND/OR SOME POSITIVE DATA EXIST,
METHACRYLATE BLADDER BUT THE DATA ARE NOT
SUFFICIENT FOR
CLASSIFICATION
METHYL INHALATION LIVER SOME POSITIVE DATA EXIST,
METHACRYLATE BUT THE DATA ARE NOT
SUFFICIENT FOR
CLASSIFICATION
METHYL INHALATION RESPIRATORY SOME POSITIVE DATA EXIST,
METHACRYLATE SYSTEM BUT THE DATA ARE NOT
SUFFICIENT FOR
CLASSIFICATION
NAME SPECIES TEST RESULT EXPOSURE DURATION
CARBON BLACK HUMAN NOAEL: OCCUPATIONAL
NOT AVAILABLE EXPOSURE
METHYL METHACRYLATE HUMAN NOAEL: OCCUPATIONAL
NOT AVAILABLE EXPOSURE
METHYL METHACRYLATE HUMAN NOAEL: OCCUPATIONAL
NOT AVAILABLE EXPOSURE
METHYL METHACRYLATE MULTIPLE NOAEL: 14 WEEKS
ANIMAL NOT AVAILABLE
SPECIES
METHYL METHACRYLATE MOUSE NOAEL: 12.3 MG/L 14 WEEKS
METHYL METHACRYLATE HUMAN NOAEL: OCCUPATIONAL
NOT AVAILABLE EXPOSURE
ASPIRATION HAZARD:
FOR THE COMPONENT/COMPONENTS, EITHER NO DATA ARE CURRENTLY AVAILABLE OR
THE DATA ARE NOT SUFFICIENT FOR CLASSIFICATION.
PLEASE CONTACT THE ADDRESS OR PHONE NUMBER LISTED IN SECTION 1 OF THIS
SDS FOR ADDITIONAL TOXICOLOGICAL INFORMATION ON THIS MATERIAL AND/OR
ITS COMPONENTS.
| SECTION 12: ECOLOGICAL INFORMATION | |
ECOTOXICOLOGICAL INFORMATION:
PLEASE CONTACT THE ADDRESS OR PHONE NUMBER LISTED IN SECTION 1 OF THIS
SDS FOR ADDITIONAL ECOTOXICOLOGICAL INFORMATION ON THIS MATERIAL AND/OR
ITS COMPONENTS.
CHEMICAL FATE INFORMATION:
PLEASE CONTACT THE ADDRESS OR PHONE NUMBER LISTED IN SECTION 1 OF THIS
SDS FOR ADDITIONAL CHEMICAL FATE INFORMATION ON THIS MATERIAL AND/OR
ITS COMPONENTS.
| SECTION 13: DISPOSAL CONSIDERATIONS | |
13.1. DISPOSAL METHODS:
DISPOSE OF CONTENTS/ CONTAINER IN ACCORDANCE WITH THE
LOCAL/REGIONAL/NATIONAL/INTERNATIONAL REGULATIONS.
DISPOSE OF COMPLETELY CURED (OR POLYMERIZED) MATERIAL IN A PERMITTED
INDUSTRIAL WASTE FACILITY. AS A DISPOSAL ALTERNATIVE, INCINERATE UNCURED
PRODUCT IN A PERMITTED WASTE INCINERATION FACILITY. PROPER DESTRUCTION MAY
REQUIRE THE USE OF ADDITIONAL FUEL DURING INCINERATION PROCESSES. EMPTY
DRUMS/BARRELS/CONTAINERS USED FOR TRANSPORTING AND HANDLING HAZARDOUS
CHEMICALS (CHEMICAL SUBSTANCES/MIXTURES/PREPARATIONS CLASSIFIED AS
HAZARDOUS AS PER APPLICABLE REGULATIONS) SHALL BE CONSIDERED, STORED,
TREATED & DISPOSED OF AS HAZARDOUS WASTES UNLESS OTHERWISE DEFINED BY
APPLICABLE WASTE REGULATIONS. CONSULT WITH THE RESPECTIVE REGULATING
AUTHORITIES TO DETERMINE THE AVAILABLE TREATMENT AND DISPOSAL FACILITIES.
EPA HAZARDOUS WASTE NUMBER (RCRA): NOT REGULATED
| SECTION 14: TRANSPORT INFORMATION | |
FOR TRANSPORT INFORMATION, PLEASE VISIT:
HTTP://3M.COM/TRANSPORTINFO OR CALL 1-800-364-3577 OR 651-737-6501.
| SECTION 15: REGULATORY INFORMATION | |
15.1. US FEDERAL REGULATIONS: CONTACT 3M FOR MORE INFORMATION.
311/312 HAZARD CATEGORIES:
FIRE HAZARD: NO
PRESSURE HAZARD: NO
REACTIVITY HAZARD: NO
IMMEDIATE HAZARD: YES
DELAYED HAZARD: NO
15.2. STATE REGULATIONS: CONTACT 3M FOR MORE INFORMATION.
15.3. CHEMICAL INVENTORIES:
THE COMPONENTS OF THIS PRODUCT ARE IN COMPLIANCE WITH THE CHEMICAL
NOTIFICATION REQUIREMENTS OF TSCA.
CONTACT 3M FOR MORE INFORMATION.
15.4. INTERNATIONAL REGULATIONS: CONTACT 3M FOR MORE INFORMATION.
THIS SDS HAS BEEN PREPARED TO MEET THE U.S. OSHA HAZARD COMMUNICATION
STANDARD, 29 CFR 1910.1200.
| SECTION 16: OTHER INFORMATION | |
NFPA HAZARD CLASSIFICATION:
HEALTH 2
FLAMMABILITY 1
INSTABILITY 0
SPECIAL HAZARDS NONE
NATIONAL FIRE PROTECTION ASSOCIATION (NFPA) HAZARD RATINGS ARE DESIGNED FOR
USE BY EMERGENCY RESPONSE PERSONNEL TO ADDRESS THE HAZARDS THAT ARE
PRESENTED BY SHORT-TERM, ACUTE EXPOSURE TO A MATERIAL UNDER CONDITIONS OF
FIRE, SPILL, OR SIMILAR EMERGENCIES. HAZARD RATINGS ARE PRIMARILY BASED ON
THE INHERENT PHYSICAL AND TOXIC PROPERTIES OF THE MATERIAL BUT ALSO INCLUDE
THE TOXIC PROPERTIES OF COMBUSTION OR DECOMPOSITION PRODUCTS THAT ARE KNOWN
TO BE GENERATED IN SIGNIFICANT QUANTITIES.
DOCUMENT GROUP: 28-2531-3
ISSUE DATE: 04/01/16
VERSION NUMBER: 3.01
SUPERCEDES DATE: 04/16/15
DISCLAIMER:
THE INFORMATION IN THIS SAFETY DATA SHEET (SDS) IS BELIEVED TO BE CORRECT
AS OF THE DATE ISSUED. 3M MAKES NO WARRANTIES, EXPRESSED OR IMPLIED,
INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE OR COURSE OF PERFORMANCE OR USAGE OF
TRADE. USER IS RESPONSIBLE FOR DETERMINING WHETHER THE 3M PRODUCT IS FIT
FOR A PARTICULAR PURPOSE AND SUITABLE FOR USER'S METHOD OF USE OR
APPLICATION. GIVEN THE VARIETY OF FACTORS THAT CAN AFFECT THE USE AND
APPLICATION OF A 3M PRODUCT, SOME OF WHICH ARE UNIQUELY WITHIN THE USER'S
KNOWLEDGE AND CONTROL, IT IS ESSENTIAL THAT THE USER EVALUATE THE 3M
PRODUCT TO DETERMINE WHETHER IT IS FIT FOR A PARTICULAR PURPOSE AND
SUITABLE FOR USER'S METHOD OF USE OR APPLICATION.
3M PROVIDES INFORMATION IN ELECTRONIC FORM AS A SERVICE TO ITS CUSTOMERS.
DUE TO THE REMOTE POSSIBILITY THAT ELECTRONIC TRANSFER MAY HAVE RESULTED IN
ERRORS, OMISSIONS OR ALTERATIONS IN THIS INFORMATION, 3M MAKES NO
REPRESENTATIONS AS TO ITS COMPLETENESS OR ACCURACY. IN ADDITION,
INFORMATION OBTAINED FROM A DATABASE MAY NOT BE AS CURRENT AS THE
INFORMATION IN THE SDS AVAILABLE DIRECTLY FROM 3M
3M USA SDSS ARE AVAILABLE AT WWW.3M.COM