| Common Name: | LOCTITE EA E-00NS KNOWN AS DB EPOXY ADHE E-00NS 50 ML, 29294_209524, LOCTITE EA |
| Manufacturer: | HENKEL |
| SDS Revision Date: | 7/1/2014 |
| SDS Format: | GHS-US |
| Item Number(s): | 4UK11 |
| Manufacturer Model Number(s): |
SDS Table of Contents
Click the desired link below to jump directly to that section in the SDS.
SAFETY DATA SHEET
HENKEL
REVISION NUMBER: 004.0
ISSUE DATE: 07/01/2014
| 1. PRODUCT AND COMPANY IDENTIFICATION |  |
PRODUCT NAME: LOCTITE EA E-00NS KNOWN AS DB EPOXY ADHE E-00NS 50 ML
IDH NUMBER: 701955
PRODUCT TYPE: EPOXY RESIN
ITEM NUMBER: 29294_209524
RESTRICTION OF USE: NONE IDENTIFIED
REGION: UNITED STATES
COMPANY ADDRESS:
HENKEL CORPORATION
ONE HENKEL WAY
ROCKY HILL, CONNECTICUT 06067
CONTACT INFORMATION:
TELEPHONE: (860) 571-5100
MEDICAL EMERGENCY PHONE:
POISON CONTROL CENTER: 1-877-671-4608 (TOLL FREE) OR 1-303-592-1711
TRANSPORT EMERGENCY PHONE:
CHEMTREC: 1-800-424-9300 (TOLL FREE) OR 1-703-527-3887
INTERNET: WWW.HENKELNA.COM
| 2. HAZARDS IDENTIFICATION | |
EMERGENCY OVERVIEW:
WARNING:
CAUSES SKIN IRRITATION.
MAY CAUSE AN ALLERGIC SKIN REACTION.
CAUSES SERIOUS EYE IRRITATION.
HAZARD CLASS HAZARD CATEGORY
SKIN IRRITATION 2
EYE IRRITATION 2A
SKIN SENSITIZATION 1
PICTOGRAM(S): EXCLAMATION MARK
PRECAUTIONARY STATEMENTS:
PREVENTION:
AVOID BREATHING VAPORS, MIST, OR SPRAY. WASH THOROUGHLY AFTER HANDLING.
CONTAMINATED WORK CLOTHING SHOULD NOT BE ALLOWED OUT OF THE WORKPLACE.
WEAR EYE AND FACE PROTECTION. WEAR PROTECTIVE GLOVES.
RESPONSE:
IF ON SKIN: WASH WITH PLENTY OF SOAP AND WATER.
IF IN EYES:
RINSE CAUTIOUSLY WITH WATER FOR SEVERAL MINUTES. REMOVE CONTACT LENSES, IF
PRESENT AND EASY TO REMOVE. CONTINUE RINSING.
IF SKIN IRRITATION OR RASH OCCURS: GET MEDICAL ATTENTION.
IF EYE IRRITATION PERSISTS:
GET MEDICAL ATTENTION. TAKE OFF CONTAMINATED CLOTHING.
STORAGE: NOT PRESCRIBED
DISPOSAL:
DISPOSE OF CONTENTS AND/OR CONTAINER ACCORDING TO FEDERAL, STATE/PROVINCIAL
AND LOCAL GOVERNMENTAL REGULATIONS.
CLASSIFICATION COMPLIES WITH OSHA HAZARD COMMUNICATION STANDARD (29 CFR
1910.1200) AND IS CONSISTENT WITH THE PROVISIONS OF THE UNITED NATIONS
GLOBALLY HARMONIZED SYSTEM OF CLASSIFICATION AND LABELING OF CHEMICALS
(GHS).
SEE SECTION 11 FOR ADDITIONAL TOXICOLOGICAL INFORMATION.
| 3. COMPOSITION / INFORMATION ON INGREDIENTS | |
HAZARDOUS COMPONENT(S) CAS NUMBER PERCENTAGE*
EPOXY RESIN PROPRIETARY 60 - 100
EPOXY RESIN PROPRIETARY 10 - 30
TREATED FUMED SILICA 67762-90-7 1 - 5
EPOXY RESIN PROPRIETARY 0.1 - 1
* EXACT PERCENTAGE IS A TRADE SECRET. CONCENTRATION RANGE IS PROVIDED TO
ASSIST USERS IN PROVIDING APPROPRIATE PROTECTIONS.
| 4. FIRST AID MEASURES | |
INHALATION:
MOVE TO FRESH AIR. IF NOT BREATHING, GIVE ARTIFICIAL RESPIRATION. IF
BREATHING IS DIFFICULT, GIVE OXYGEN. GET MEDICAL ATTENTION.
SKIN CONTACT:
IMMEDIATELY FLUSH SKIN WITH PLENTY OF WATER (USING SOAP, IF AVAILABLE).
REMOVE CONTAMINATED CLOTHING AND FOOTWEAR. GET MEDICAL ATTENTION. WASH
CLOTHING BEFORE REUSE. THOROUGHLY CLEAN SHOES BEFORE REUSE.
EYE CONTACT:
RINSE IMMEDIATELY WITH PLENTY OF WATER, ALSO UNDER THE EYELIDS, FOR AT
LEAST 15 MINUTES. GET MEDICAL ATTENTION.
INGESTION:
DO NOT INDUCE VOMITING UNLESS DIRECTED TO DO SO BY MEDICAL PERSONNEL.
NEVER GIVE ANYTHING BY MOUTH TO AN UNCONSCIOUS PERSON. GET MEDICAL
ATTENTION.
SYMPTOMS: SEE SECTION 11.
| 5. FIRE FIGHTING MEASURES | |
EXTINGUISHING MEDIA:
WATER SPRAY (FOG), FOAM, DRY CHEMICAL OR CARBON DIOXIDE.
SPECIAL FIREFIGHTING PROCEDURES:
WEAR SELF-CONTAINED BREATHING APPARATUS AND FULL PROTECTIVE CLOTHING, SUCH
AS TURN-OUT GEAR.
UNUSUAL FIRE OR EXPLOSION HAZARDS:
IN CASE OF FIRE, KEEP CONTAINERS COOL WITH WATER SPRAY. CLOSED CONTAINERS
MAY RUPTURE (DUE TO BUILD UP OF PRESSURE) WHEN EXPOSED TO EXTREME HEAT.
HAZARDOUS COMBUSTION PRODUCTS:
OXIDES OF CARBON. ALDEHYDES. FORMALDEHYDE. TOXIC FUMES. IRRITATING VAPORS.
| 6. ACCIDENTAL RELEASE MEASURES | |
USE PERSONAL PROTECTION RECOMMENDED IN SECTION 8, ISOLATE THE HAZARD AREA
AND DENY ENTRY TO UNNECESSARY AND UNPROTECTED PERSONNEL.
ENVIRONMENTAL PRECAUTIONS:
DO NOT ALLOW PRODUCT TO ENTER SEWER OR WATERWAYS.
CLEAN-UP METHODS:
REMOVE ALL SOURCES OF IGNITION. EVACUATE AND VENTILATE SPILL AREA; DIKE
SPILL TO PREVENT ENTRY INTO WATER SYSTEM; WEAR FULL PROTECTIVE EQUIPMENT
DURING CLEANUP. SOAK UP WITH INERT ABSORBENT MATERIAL (E.G. SAND, SILICA
GEL, ACID BINDER, UNIVERSAL BINDER, SAWDUST). SCRAPE UP AS MUCH MATERIAL
AS POSSIBLE. STORE IN A PARTLY FILLED, CLOSED CONTAINER UNTIL DISPOSAL.
REFER TO SECTION 8 "EXPOSURE CONTROLS / PERSONAL PROTECTION" PRIOR TO
CLEAN UP.
| 7. HANDLING AND STORAGE | |
HANDLING:
USE ONLY WITH ADEQUATE VENTILATION. PREVENT CONTACT WITH EYES, SKIN AND
CLOTHING. DO NOT BREATHE VAPOR AND MIST. WASH THOROUGHLY AFTER HANDLING.
KEEP CONTAINER CLOSED. REFER TO SECTION 8.
STORAGE:
STORE IN ORIGINAL CONTAINER UNTIL READY TO USE. KEEP CONTAINER TIGHTLY
CLOSED AND IN A COOL, WELL-VENTILATED PLACE AWAY FROM INCOMPATIBLE
MATERIALS. STORE AWAY FROM HEAT, SPARKS, FLAMES, OR OTHER SOURCES OF
IGNITION.
FOR INFORMATION ON PRODUCT SHELF LIFE CONTACT HENKEL CUSTOMER SERVICE AT
(800) 243-4874.
| 8. EXPOSURE CONTROLS / PERSONAL PROTECTION | |
EMPLOYERS SHOULD COMPLETE AN ASSESSMENT OF ALL WORKPLACES TO DETERMINE THE
NEED FOR, AND SELECTION OF, PROPER EXPOSURE CONTROLS AND PROTECTIVE
EQUIPMENT FOR EACH TASK PERFORMED.
HAZARDOUS COMPONENT(S) ACGIH TLV OSHA PEL AIHA WEEL OTHER
EPOXY RESIN NONE NONE NONE NONE
EPOXY RESIN NONE NONE NONE NONE
TREATED FUMED SILICA 10 MG/M3 TWA 15 MG/M3 TWA NONE NONE
INHALABLE DUST. TOTAL DUST.
3 MG/M3 TWA 5 MG/M3 TWA
RESPIRABLE RESPIRABLE
FRACTION. FRACTION.
EPOXY RESIN NONE NONE NONE NONE
ENGINEERING CONTROLS:
PROVIDE ADEQUATE LOCAL EXHAUST VENTILATION TO MAINTAIN WORKER EXPOSURE
BELOW EXPOSURE LIMITS.
RESPIRATORY PROTECTION:
USE A NIOSH APPROVED AIR-PURIFYING RESPIRATOR IF THE POTENTIAL TO EXCEED
ESTABLISHED EXPOSURE LIMITS EXISTS.
EYE/FACE PROTECTION:
SAFETY GOGGLES OR SAFETY GLASSES WITH SIDE SHIELDS. FULL FACE PROTECTION
SHOULD BE USED IF THE POTENTIAL FOR SPLASHING OR SPRAYING OF PRODUCT
EXISTS. SAFETY SHOWERS AND EYE WASH STATIONS SHOULD BE AVAILABLE.
SKIN PROTECTION:
USE CHEMICAL RESISTANT, IMPERMEABLE CLOTHING INCLUDING GLOVES AND EITHER AN
APRON OR BODY SUIT TO PREVENT SKIN CONTACT.
| 9. PHYSICAL AND CHEMICAL PROPERTIES | |
PHYSICAL STATE: LIQUID
COLOR: CLEAR, YELLOW
ODOR: FAINT, EPOXY
ODOR THRESHOLD: NOT AVAILABLE.
PH: NOT APPLICABLE
VAPOR PRESSURE: NOT AVAILABLE.
BOILING POINT/RANGE: >149 DEG. C (>300.2 DEG. F)
MELTING POINT/RANGE: NOT AVAILABLE.
SPECIFIC GRAVITY: 1.17
VAPOR DENSITY: NOT AVAILABLE.
FLASH POINT: >93.4 DEG. C (>200.12 DEG. F) PENSKY MARTENS CLOSED CUP
FLAMMABLE/EXPLOSIVE LIMITS - LOWER: NOT AVAILABLE.
FLAMMABLE/EXPLOSIVE LIMITS - UPPER: NOT AVAILABLE.
AUTOIGNITION TEMPERATURE: NOT AVAILABLE.
EVAPORATION RATE: NOT AVAILABLE.
SOLUBILITY IN WATER: NEGLIGIBLE
PARTITION COEFFICIENT (N-OCTANOL/WATER): NOT AVAILABLE.
VOC CONTENT: <1%; <10 G/L ESTIMATED
VISCOSITY: NOT AVAILABLE.
DECOMPOSITION TEMPERATURE: NOT AVAILABLE.
| 10. STABILITY AND REACTIVITY | |
STABILITY: STABLE UNDER NORMAL CONDITIONS OF STORAGE AND USE.
HAZARDOUS REACTIONS:
POLYMERIZATION MAY OCCUR AT ELEVATED TEMPERATURE OR IN THE PRESENCE OF
INCOMPATIBLE MATERIALS.
HAZARDOUS DECOMPOSITION PRODUCTS:
OXIDES OF CARBON. ALDEHYDES. FORMALDEHYDE. TOXIC FUMES. IRRITATING VAPORS.
INCOMPATIBLE MATERIALS:
STRONG OXIDIZING AGENTS. STRONG ACIDS AND STRONG BASES. AMINES.
REACTIVITY: NOT AVAILABLE.
CONDITIONS TO AVOID:
KEEP AWAY FROM HEAT, IGNITION SOURCES AND INCOMPATIBLE MATERIALS.
NOTE:
HEATING THE EPOXY RESIN IN THIS PRODUCT ABOVE 148.9 DEG. C (300 DEG. F)
IN THE PRESENCE OF AIR MAY CAUSE SLOW OXIDATIVE DECOMPOSITION. ABOVE
260 DEG. C (500 DEG. F) POLYMERIZATION OF THE EPOXY RESIN MAY OCCUR.
ALIPHATIC POLYAMINES CAN PRODUCE EXOTHERMIC REACTIONS WITH EPOXY RESINS
WHICH IN LARGE MASSES CAN CAUSE RUNAWAY POLYMERIZATION AND CHARRING OF THE
REACTANTS. FUMES AND VAPORS FROM THESE THERMAL AND CHEMICAL DECOMPOSITIONS
VARY WIDELY IN COMPOSITION AND TOXICITY. DO NOT BREATHE FUMES.
| 11. TOXICOLOGICAL INFORMATION | |
RELEVANT ROUTES OF EXPOSURE: SKIN, INHALATION, EYES, INGESTION
POTENTIAL HEALTH EFFECTS/SYMPTOMS:
INHALATION:
MAY CAUSE IRRITATION TO NOSE AND THROAT. INHALATION OF VAPORS OR MISTS OF
THE PRODUCT MAY BE IRRITATING TO THE RESPIRATORY SYSTEM.
SKIN CONTACT:
CAUSES SKIN IRRITATION. MAY CAUSE ALLERGIC SKIN REACTION. ITCHING. REDNESS.
EYE CONTACT: CAUSES SERIOUS EYE IRRITATION. REDNESS.
INGESTION: MAY CAUSE GASTROINTESTINAL TRACT IRRITATION IF SWALLOWED.
HAZARDOUS COMPONENT(S) LD50S AND LC50S IMMEDIATE AND DELAYED
HEALTH EFFECTS
EPOXY RESIN NONE ALLERGEN, IRRITANT
EPOXY RESIN NONE ALLERGEN, IRRITANT
TREATED FUMED SILICA NONE IRRITANT
EPOXY RESIN NONE NO DATA
HAZARDOUS COMPONENT(S) NTP CARCINOGEN IARC CARCINOGEN OSHA CARCINOGEN
(SPECIFICALLY
REGULATED)
EPOXY RESIN NO NO NO
EPOXY RESIN NO NO NO
TREATED FUMED SILICA NO NO NO
EPOXY RESIN NO NO NO
| 12. ECOLOGICAL INFORMATION | |
ECOLOGICAL INFORMATION: NOT AVAILABLE.
| 13. DISPOSAL CONSIDERATIONS | |
INFORMATION PROVIDED IS FOR UNUSED PRODUCT ONLY.
RECOMMENDED METHOD OF DISPOSAL:
FOLLOW ALL LOCAL, STATE, FEDERAL AND PROVINCIAL REGULATIONS FOR DISPOSAL.
HAZARDOUS WASTE NUMBER: NOT A RCRA HAZARDOUS WASTE.
| 14. TRANSPORT INFORMATION | |
THE TRANSPORT INFORMATION PROVIDED IN THIS SECTION ONLY APPLIES TO THE
MATERIAL/FORMULATION ITSELF, AND IS NOT SPECIFIC TO ANY
PACKAGE/CONFIGURATION.
U.S. DEPARTMENT OF TRANSPORTATION GROUND (49 CFR):
PROPER SHIPPING NAME: NOT REGULATED
HAZARD CLASS OR DIVISION: NONE
IDENTIFICATION NUMBER: NONE
PACKING GROUP: NONE
INTERNATIONAL AIR TRANSPORTATION (ICAO/IATA):
PROPER SHIPPING NAME:
ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S. (BISPHENOL-A
EPICHLORHYDRIN RESIN)
HAZARD CLASS OR DIVISION: 9
IDENTIFICATION NUMBER: UN 3082
PACKING GROUP: III
WATER TRANSPORTATION (IMO/IMDG):
PROPER SHIPPING NAME:
ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S. (BISPHENOL-A
EPICHLORHYDRIN RESIN)
HAZARD CLASS OR DIVISION: 9
IDENTIFICATION NUMBER: UN 3082
PACKING GROUP: III
MARINE POLLUTANT: BISPHENOL-A EPICHLORHYDRIN RESIN
| 15. REGULATORY INFORMATION | |
UNITED STATES REGULATORY INFORMATION:
TSCA 8(B) INVENTORY STATUS:
ALL COMPONENTS ARE LISTED OR ARE EXEMPT FROM LISTING ON THE TOXIC
SUBSTANCES CONTROL ACT INVENTORY.
TSCA 12(B) EXPORT NOTIFICATION: NONE ABOVE REPORTING DE MINIMIS
CERCLA/SARA SECTION 302 EHS: NONE ABOVE REPORTING DE MINIMIS
CERCLA/SARA SECTION 311/312: IMMEDIATE HEALTH
CERCLA/SARA SECTION 313: NONE ABOVE REPORTING DE MINIMIS
CALIFORNIA PROPOSITION 65:
THIS PRODUCT CONTAINS A CHEMICAL KNOWN IN THE STATE OF CALIFORNIA TO CAUSE
CANCER. THIS PRODUCT CONTAINS A CHEMICAL KNOWN TO THE STATE OF CALIFORNIA
TO CAUSE BIRTH DEFECTS OR OTHER REPRODUCTIVE HARM.
CANADA REGULATORY INFORMATION:
CEPA DSL/NDSL STATUS:
ALL COMPONENTS ARE LISTED ON OR ARE EXEMPT FROM LISTING ON THE CANADIAN
DOMESTIC SUBSTANCES LIST.
| 16. OTHER INFORMATION | |
THIS SAFETY DATA SHEET CONTAINS CHANGES FROM THE PREVIOUS VERSION IN
SECTIONS: NEW SAFETY DATA SHEET FORMAT.
PREPARED BY: SHEILA GINES, REGULATORY AFFAIRS SPECIALIST
ISSUE DATE: 07/01/2014
DISCLAIMER:
THE DATA CONTAINED HEREIN ARE FURNISHED FOR INFORMATION ONLY AND ARE
BELIEVED TO BE RELIABLE. HOWEVER, HENKEL CORPORATION AND ITS AFFILIATES
("HENKEL") DOES NOT ASSUME RESPONSIBILITY FOR ANY RESULTS OBTAINED BY
PERSONS OVER WHOSE METHODS HENKEL HAS NO CONTROL. IT IS THE USER'S
RESPONSIBILITY TO DETERMINE THE SUITABILITY OF HENKEL'S PRODUCTS OR ANY
PRODUCTION METHODS MENTIONED HEREIN FOR A PARTICULAR PURPOSE, AND TO ADOPT
SUCH PRECAUTIONS AS MAY BE ADVISABLE FOR THE PROTECTION OF PROPERTY AND
PERSONS AGAINST ANY HAZARDS THAT MAY BE INVOLVED IN THE HANDLING AND USE
OF ANY HENKEL'S PRODUCTS. IN LIGHT OF THE FOREGOING, HENKEL SPECIFICALLY
DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARISING FROM SALE
OR USE OF HENKEL'S PRODUCTS. HENKEL FURTHER DISCLAIMS ANY LIABILITY FOR
CONSEQUENTIAL OR INCIDENTAL DAMAGES OF ANY KIND, INCLUDING LOST PROFITS.
SAFETY DATA SHEET
HENKEL
REVISION NUMBER: 004.0
ISSUE DATE: 07/03/2014
| 1. PRODUCT AND COMPANY IDENTIFICATION | |
PRODUCT NAME:
LOCTITE EA E-00NS B HARDENER KNOWN AS DB EPOXY ADH E-00NS 50 ML HARD
IDH NUMBER: 701956
PRODUCT TYPE: EPOXY HARDENER
ITEM NUMBER: 29294_209525
RESTRICTION OF USE: NONE IDENTIFIED
REGION: UNITED STATES
COMPANY ADDRESS:
HENKEL CORPORATION
ONE HENKEL WAY
ROCKY HILL, CONNECTICUT 06067
CONTACT INFORMATION:
TELEPHONE: (860) 571-5100
MEDICAL EMERGENCY PHONE:
POISON CONTROL CENTER: 1-877-671-4608 (TOLL FREE) OR 1-303-592-1711
TRANSPORT EMERGENCY PHONE:
CHEMTREC: 1-800-424-9300 (TOLL FREE) OR 1-703-527-3887
INTERNET: WWW.HENKELNA.COM
| 2. HAZARDS IDENTIFICATION | |
EMERGENCY OVERVIEW:
DANGER:
CAUSES SEVERE SKIN BURNS AND EYE DAMAGE.
MAY CAUSE AN ALLERGIC SKIN REACTION.
MAY CAUSE ALLERGY OR ASTHMA SYMPTOMS OR BREATHING DIFFICULTIES IF INHALED.
HAZARD CLASS HAZARD CATEGORY
SKIN CORROSION 1B
SERIOUS EYE DAMAGE 1
RESPIRATORY SENSITIZATION 1
SKIN SENSITIZATION 1
PICTOGRAM(S):
HEALTH HAZARD
CORROSION
PRECAUTIONARY STATEMENTS:
PREVENTION:
DO NOT BREATHE VAPORS, MIST, OR SPRAY. WASH THOROUGHLY AFTER HANDLING.
CONTAMINATED WORK CLOTHING SHOULD NOT BE ALLOWED OUT OF THE WORKPLACE.
WEAR PROTECTIVE GLOVES, EYE PROTECTION, AND FACE PROTECTION. IN CASE OF
INADEQUATE VENTILATION WEAR RESPIRATORY PROTECTION.
RESPONSE:
IF SWALLOWED: RINSE MOUTH. DO NOT INDUCE VOMITING.
IF ON SKIN (OR HAIR): TAKE OFF IMMEDIATELY ALL CONTAMINATED CLOTHING.
IF INHALED: REMOVE PERSON TO FRESH AIR AND KEEP COMFORTABLE FOR BREATHING.
IF IN EYES:
RINSE CAUTIOUSLY WITH WATER FOR SEVERAL MINUTES. REMOVE CONTACT LENSES, IF
PRESENT AND EASY TO REMOVE. CONTINUE RINSING. IMMEDIATELY CALL A POISON
CONTROL CENTER OR PHYSICIAN.
IF SKIN IRRITATION OR RASH OCCURS: GET MEDICAL ATTENTION.
IF EXPERIENCING RESPIRATORY SYMPTOMS:
CALL A POISON CENTER OR PHYSICIAN. WASH CONTAMINATED CLOTHING BEFORE REUSE.
STORAGE: STORE LOCKED UP.
DISPOSAL:
DISPOSE OF CONTENTS AND/OR CONTAINER ACCORDING TO FEDERAL, STATE/PROVINCIAL
AND LOCAL GOVERNMENTAL REGULATIONS.
CLASSIFICATION COMPLIES WITH OSHA HAZARD COMMUNICATION STANDARD (29 CFR
1910.1200) AND IS CONSISTENT WITH THE PROVISIONS OF THE UNITED NATIONS
GLOBALLY HARMONIZED SYSTEM OF CLASSIFICATION AND LABELING OF CHEMICALS
(GHS).
SEE SECTION 11 FOR ADDITIONAL TOXICOLOGICAL INFORMATION.
| 3. COMPOSITION / INFORMATION ON INGREDIENTS | |
HAZARDOUS COMPONENT(S) CAS NUMBER PERCENTAGE*
POLYMERCAPTAN HARDENER PROPRIETARY 60 - 100
BENZYLDIMETHYLAMINE 103-83-3 5 - 10
TREATED FUMED SILICA 67762-90-7 1 - 5
MONOETHANOLAMINE 141-43-5 1 - 5
* EXACT PERCENTAGE IS A TRADE SECRET. CONCENTRATION RANGE IS PROVIDED TO
ASSIST USERS IN PROVIDING APPROPRIATE PROTECTIONS.
| 4. FIRST AID MEASURES | |
INHALATION:
MOVE TO FRESH AIR. IF NOT BREATHING, GIVE ARTIFICIAL RESPIRATION.
IF BREATHING IS DIFFICULT, GIVE OXYGEN. GET MEDICAL ATTENTION.
SKIN CONTACT:
IMMEDIATELY FLUSH SKIN WITH PLENTY OF WATER (USING SOAP, IF AVAILABLE).
REMOVE CONTAMINATED CLOTHING AND FOOTWEAR. GET MEDICAL ATTENTION. WASH
CLOTHING BEFORE REUSE. THOROUGHLY CLEAN SHOES BEFORE REUSE.
EYE CONTACT:
RINSE IMMEDIATELY WITH PLENTY OF WATER, ALSO UNDER THE EYELIDS, FOR AT
LEAST 15 MINUTES. GET MEDICAL ATTENTION.
INGESTION:
DO NOT INDUCE VOMITING UNLESS DIRECTED TO DO SO BY MEDICAL PERSONNEL.
NEVER GIVE ANYTHING BY MOUTH TO AN UNCONSCIOUS PERSON. GET MEDICAL
ATTENTION.
SYMPTOMS: SEE SECTION 11.
| 5. FIRE FIGHTING MEASURES | |
EXTINGUISHING MEDIA:
WATER SPRAY (FOG), FOAM, DRY CHEMICAL OR CARBON DIOXIDE.
SPECIAL FIREFIGHTING PROCEDURES:
WEAR SELF-CONTAINED BREATHING APPARATUS AND FULL PROTECTIVE CLOTHING, SUCH
AS TURN-OUT GEAR.
UNUSUAL FIRE OR EXPLOSION HAZARDS:
IN CASE OF FIRE, KEEP CONTAINERS COOL WITH WATER SPRAY. CLOSED CONTAINERS
MAY RUPTURE (DUE TO BUILD UP OF PRESSURE) WHEN EXPOSED TO EXTREME HEAT.
HAZARDOUS COMBUSTION PRODUCTS:
OXIDES OF CARBON. OXIDES OF NITROGEN. OXIDES OF SULFUR. FORMALDEHYDE.
HYDROGEN SULFIDE. TOXIC FUMES. IRRITATING VAPORS.
| 6. ACCIDENTAL RELEASE MEASURES | |
USE PERSONAL PROTECTION RECOMMENDED IN SECTION 8, ISOLATE THE HAZARD AREA
AND DENY ENTRY TO UNNECESSARY AND UNPROTECTED PERSONNEL.
ENVIRONMENTAL PRECAUTIONS:
DO NOT ALLOW PRODUCT TO ENTER SEWER OR WATERWAYS.
CLEAN-UP METHODS:
REMOVE ALL SOURCES OF IGNITION. EVACUATE AND VENTILATE SPILL AREA; DIKE
SPILL TO PREVENT ENTRY INTO WATER SYSTEM; WEAR FULL PROTECTIVE EQUIPMENT
DURING CLEANUP. REFER TO SECTION 8 "EXPOSURE CONTROLS / PERSONAL
PROTECTION" PRIOR TO CLEAN UP. SOAK UP WITH INERT ABSORBENT MATERIAL
(E.G. SAND, SILICA GEL, ACID BINDER, UNIVERSAL BINDER, SAWDUST). SCRAPE
UP SPILLED MATERIAL AND PLACE IN A CLOSED CONTAINER FOR DISPOSAL.
| 7. HANDLING AND STORAGE | |
HANDLING:
PREVENT CONTACT WITH EYES, SKIN AND CLOTHING. DO NOT BREATHE VAPOR AND
MIST. WASH THOROUGHLY AFTER HANDLING. DO NOT TASTE OR SWALLOW. USE ONLY
WITH ADEQUATE VENTILATION. KEEP CONTAINER CLOSED. REFER TO SECTION 8.
STORAGE:
STORE IN ORIGINAL CONTAINER UNTIL READY TO USE. KEEP CONTAINER TIGHTLY
CLOSED AND IN A COOL, WELL-VENTILATED PLACE AWAY FROM INCOMPATIBLE
MATERIALS. STORE AWAY FROM HEAT, SPARKS, FLAMES, OR OTHER SOURCES OF
IGNITION.
FOR INFORMATION ON PRODUCT SHELF LIFE CONTACT HENKEL CUSTOMER SERVICE AT
(800) 243-4874.
| 8. EXPOSURE CONTROLS / PERSONAL PROTECTION | |
EMPLOYERS SHOULD COMPLETE AN ASSESSMENT OF ALL WORKPLACES TO DETERMINE THE
NEED FOR, AND SELECTION OF, PROPER EXPOSURE CONTROLS AND PROTECTIVE
EQUIPMENT FOR EACH TASK PERFORMED.
HAZARDOUS COMPONENT(S) ACGIH TLV OSHA PEL AIHA WEEL OTHER
POLYMERCAPTAN HARDENER NONE NONE NONE NONE
BENZYLDIMETHYLAMINE NONE NONE NONE NONE
TREATED FUMED SILICA 10 MG/M3 TWA 15 MG/M3 TWA NONE NONE
INHALABLE DUST. TOTAL DUST.
3 MG/M3 TWA 5 MG/M3 TWA
RESPIRABLE RESPIRABLE
FRACTION. FRACTION.
MONOETHANOLAMINE 3 PPM TWA 3 PPM NONE NONE
6 PPM STEL (6 MG/M3)
PEL
ENGINEERING CONTROLS:
PROVIDE ADEQUATE LOCAL EXHAUST VENTILATION TO MAINTAIN WORKER EXPOSURE
BELOW EXPOSURE LIMITS.
RESPIRATORY PROTECTION:
USE A NIOSH APPROVED AIR-PURIFYING RESPIRATOR WITH AN ORGANIC VAPOR
CARTRIDGE.
EYE/FACE PROTECTION:
SAFETY GOGGLES OR SAFETY GLASSES WITH SIDE SHIELDS. FULL FACE PROTECTION
SHOULD BE USED IF THE POTENTIAL FOR SPLASHING OR SPRAYING OF PRODUCT
EXISTS. SAFETY SHOWERS AND EYE WASH STATIONS SHOULD BE AVAILABLE.
SKIN PROTECTION:
USE CHEMICAL RESISTANT, IMPERMEABLE CLOTHING INCLUDING GLOVES AND EITHER
AN APRON OR BODY SUIT TO PREVENT SKIN CONTACT.
| 9. PHYSICAL AND CHEMICAL PROPERTIES | |
PHYSICAL STATE: LIQUID
COLOR: LIGHT, CREAM
ODOR: MERCAPTAN, SULFUR
ODOR THRESHOLD: NOT AVAILABLE.
PH: NOT AVAILABLE.
VAPOR PRESSURE: NOT AVAILABLE.
BOILING POINT/RANGE: NOT AVAILABLE.
MELTING POINT/RANGE: NOT AVAILABLE.
SPECIFIC GRAVITY: 1.12
VAPOR DENSITY: NOT AVAILABLE.
FLASH POINT: 258 DEG. C (496.4 DEG. F) CLEVELAND CLOSED CUP
FLAMMABLE/EXPLOSIVE LIMITS - LOWER: NOT AVAILABLE.
FLAMMABLE/EXPLOSIVE LIMITS - UPPER: NOT AVAILABLE.
AUTOIGNITION TEMPERATURE: NOT AVAILABLE.
EVAPORATION RATE: NOT AVAILABLE.
SOLUBILITY IN WATER: NOT AVAILABLE.
PARTITION COEFFICIENT (N-OCTANOL/WATER): NOT AVAILABLE.
VOC CONTENT: <1%; <10 G/L ESTIMATED
VISCOSITY: NOT AVAILABLE.
DECOMPOSITION TEMPERATURE: NOT AVAILABLE.
| 10. STABILITY AND REACTIVITY | |
STABILITY: STABLE UNDER NORMAL CONDITIONS OF STORAGE AND USE.
HAZARDOUS REACTIONS: NONE UNDER NORMAL PROCESSING.
HAZARDOUS DECOMPOSITION PRODUCTS:
OXIDES OF CARBON. OXIDES OF NITROGEN. OXIDES OF SULFUR. FORMALDEHYDE.
HYDROGEN SULFIDE. TOXIC FUMES. IRRITATING VAPORS.
INCOMPATIBLE MATERIALS: ACIDS. OXIDIZING AGENTS. HALOGENATED COMPOUNDS.
REACTIVITY: NOT AVAILABLE.
CONDITIONS TO AVOID:
KEEP AWAY FROM HEAT, IGNITION SOURCES AND INCOMPATIBLE MATERIALS.
| 11. TOXICOLOGICAL INFORMATION | |
RELEVANT ROUTES OF EXPOSURE: SKIN, INHALATION, EYES, INGESTION
POTENTIAL HEALTH EFFECTS/SYMPTOMS:
INHALATION:
MAY CAUSE ALLERGIC RESPIRATORY REACTION. THESE SYMPTOMS, WHICH CAN INCLUDE
CHEST TIGHTNESS, WHEEZING, COUGH, SHORTNESS OF BREATH OR ASTHMA ATTACK,
COULD BE IMMEDIATE OR DELAYED (UP TO SEVERAL HOURS AFTER EXPOSURE). CAN
CAUSE SEVERE IRRITATION AND BURNS TO THE RESPIRATORY TRACT.
SKIN CONTACT:
CORROSIVE TO SKIN. CAUSES SKIN BURNS. MAY CAUSE ALLERGIC SKIN REACTION.
EYE CONTACT:
CAUSES SERIOUS EYE DAMAGE. CAUSES EYE BURNS. BURNS OF THE EYE MAY CAUSE
BLINDNESS.
INGESTION:
MAY CAUSE BURNS OF MOUTH AND THROAT IF SWALLOWED. IRRITATION AND CORROSIVE
ACTION CAN OCCUR IN THE MOUTH, STOMACH TISSUE AND DIGESTIVE TRACT IF
SWALLOWED.
HAZARDOUS COMPONENT(S) LD50S AND LC50S IMMEDIATE AND DELAYED
HEALTH EFFECTS
POLYMERCAPTAN HARDENER NONE NO RECORDS
BENZYLDIMETHYLAMINE NONE IRRITANT, CORROSIVE,
ALLERGEN, RESPIRATORY
TREATED FUMED SILICA NONE IRRITANT
MONOETHANOLAMINE ORAL LD50 (RAT): IRRITANT, KIDNEY, LIVER,
10.2 G/KG CORROSIVE, RESPIRATORY,
DEVELOPMENTAL
DERMAL LD50 (RABBIT):
1,025 MG/KG
HAZARDOUS COMPONENT(S) NTP CARCINOGEN IARC CARCINOGEN OSHA CARCINOGEN
(SPECIFICALLY
REGULATED)
POLYMERCAPTAN HARDENER NO NO NO
BENZYLDIMETHYLAMINE NO NO NO
TREATED FUMED SILICA NO NO NO
MONOETHANOLAMINE NO NO NO
| 12. ECOLOGICAL INFORMATION | |
ECOLOGICAL INFORMATION: NOT AVAILABLE.
| 13. DISPOSAL CONSIDERATIONS | |
INFORMATION PROVIDED IS FOR UNUSED PRODUCT ONLY.
RECOMMENDED METHOD OF DISPOSAL:
FOLLOW ALL LOCAL, STATE, FEDERAL AND PROVINCIAL REGULATIONS FOR DISPOSAL.
HAZARDOUS WASTE NUMBER:
IT IS THE RESPONSIBILITY OF THE USER TO DETERMINE IF AN ITEM IS HAZARDOUS
AS DEFINED IN THE RESOURCE CONSERVATION AND RECOVERY ACT (RCRA) AT THE
TIME OF DISPOSAL. PRODUCT USES, TRANSFORMATIONS, MIXTURES, PROCESSES,
ETC., MAY RENDER THE RESULTING MATERIAL HAZARDOUS, UNDER THE CRITERIA OF
IGNITABILITY, CORROSIVITY, REACTIVITY AND TOXICITY CHARACTERISTICS OF THE
TOXICITY CHARACTERISTICS LEACHING PROCEDURE (TCLP) 40 CFR 261.20-24.
| 14. TRANSPORT INFORMATION | |
THE TRANSPORT INFORMATION PROVIDED IN THIS SECTION ONLY APPLIES TO THE
MATERIAL/FORMULATION ITSELF, AND IS NOT SPECIFIC TO ANY
PACKAGE/CONFIGURATION.
U.S. DEPARTMENT OF TRANSPORTATION GROUND (49 CFR):
PROPER SHIPPING NAME: AMINES, LIQUID, CORROSIVE, N.O.S. (ALIPHATIC AMINES)
HAZARD CLASS OR DIVISION: 8
IDENTIFICATION NUMBER: UN 2735
PACKING GROUP: III
INTERNATIONAL AIR TRANSPORTATION (ICAO/IATA):
PROPER SHIPPING NAME: AMINES, LIQUID, CORROSIVE, N.O.S. (ALIPHATIC AMINES)
HAZARD CLASS OR DIVISION: 8
IDENTIFICATION NUMBER: UN 2735
PACKING GROUP: III
WATER TRANSPORTATION (IMO/IMDG):
PROPER SHIPPING NAME: AMINES, LIQUID, CORROSIVE, N.O.S. (ALIPHATIC AMINES)
HAZARD CLASS OR DIVISION: 8
IDENTIFICATION NUMBER: UN 2735
PACKING GROUP: III
| 15. REGULATORY INFORMATION | |
UNITED STATES REGULATORY INFORMATION:
TSCA 8(B) INVENTORY STATUS:
ALL COMPONENTS ARE LISTED OR ARE EXEMPT FROM LISTING ON THE TOXIC
SUBSTANCES CONTROL ACT INVENTORY.
TSCA 12(B) EXPORT NOTIFICATION: NONE ABOVE REPORTING DE MINIMIS
CERCLA/SARA SECTION 302 EHS: NONE ABOVE REPORTING DE MINIMIS
CERCLA/SARA SECTION 311/312: IMMEDIATE HEALTH, DELAYED HEALTH
CERCLA/SARA SECTION 313: NONE ABOVE REPORTING DE MINIMIS
CALIFORNIA PROPOSITION 65:
THIS PRODUCT CONTAINS A CHEMICAL KNOWN IN THE STATE OF CALIFORNIA TO CAUSE
CANCER. THIS PRODUCT CONTAINS A CHEMICAL KNOWN TO THE STATE OF CALIFORNIA
TO CAUSE BIRTH DEFECTS OR OTHER REPRODUCTIVE HARM.
CANADA REGULATORY INFORMATION:
CEPA DSL/NDSL STATUS:
ALL COMPONENTS ARE LISTED ON OR ARE EXEMPT FROM LISTING ON THE CANADIAN
DOMESTIC SUBSTANCES LIST.
| 16. OTHER INFORMATION | |
THIS SAFETY DATA SHEET CONTAINS CHANGES FROM THE PREVIOUS VERSION IN
SECTIONS: NEW SAFETY DATA SHEET FORMAT.
PREPARED BY: SHEILA GINES, REGULATORY AFFAIRS SPECIALIST
ISSUE DATE: 07/03/2014
DISCLAIMER:
THE DATA CONTAINED HEREIN ARE FURNISHED FOR INFORMATION ONLY AND ARE
BELIEVED TO BE RELIABLE. HOWEVER, HENKEL CORPORATION AND ITS AFFILIATES
("HENKEL") DOES NOT ASSUME RESPONSIBILITY FOR ANY RESULTS OBTAINED BY
PERSONS OVER WHOSE METHODS HENKEL HAS NO CONTROL. IT IS THE USER'S
RESPONSIBILITY TO DETERMINE THE SUITABILITY OF HENKEL'S PRODUCTS OR ANY
PRODUCTION METHODS MENTIONED HEREIN FOR A PARTICULAR PURPOSE, AND TO ADOPT
SUCH PRECAUTIONS AS MAY BE ADVISABLE FOR THE PROTECTION OF PROPERTY AND
PERSONS AGAINST ANY HAZARDS THAT MAY BE INVOLVED IN THE HANDLING AND USE
OF ANY HENKEL'S PRODUCTS. IN LIGHT OF THE FOREGOING, HENKEL SPECIFICALLY
DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARISING FROM SALE
OR USE OF HENKEL'S PRODUCTS. HENKEL FURTHER DISCLAIMS ANY LIABILITY FOR
CONSEQUENTIAL OR INCIDENTAL DAMAGES OF ANY KIND, INCLUDING LOST PROFITS.