| Common Name: | LITHIUM GREASE |
| Manufacturer: | PLEWS |
| SDS Revision Date: | 6/19/2015 |
| SDS Format: | GHS-US |
| Item Number(s): | 53DN10 |
| Manufacturer Model Number(s): |
SDS Table of Contents
Click the desired link below to jump directly to that section in the SDS.
SAFETY DATA SHEET (SDS)
LITHIUM GREASE
| SECTION 1: IDENTIFICATION OF THE SUBSTANCE/MIXTURE |  |
AND OF THE COMPANY /UNDERTAKING
1.1 PRODUCT IDENTIFIER:
MATERIAL NAME: LITHIUM GREASE
PRODUCT CODE:
11300, 11302, 11304, 11309, 11310, 11312, 11315, 11316, 11328
1.2 RELEVANT IDENTIFIED USES OF THE SUBSTANCE OR MIXTURE AND USES ADVISED
AGAINST:
PRODUCT USE: INDUSTRIAL GREASE
USES ADVISED AGAINST:
THIS PRODUCT MUST NOT BE USED IN APPLICATIONS OTHER THAN RECOMMENDED IN
SECTION 1 WITHOUT TAKING THE ADVICE FROM SUPPLIER/MANUFACTURER
1.3 DETAILS OF SUPPLIER OF SAFETY DATA SHEET:
SUPPLIER:
PLEWS, INC.
1550 FRANKLIN GROVE RD.
DIXON, IL 61021
TELEPHONE NUMBER: (800) 545 - 1689
| SECTION 2: HAZARD IDENTIFICATION | |
2.1 CLASSIFICATION OF THE SUBSTANCE OF MIXTURE:
OSHA HAZARD COMMUNICATION STANDARD:
THIS MATERIAL IS NOT CONSIDERED HAZARDOUS IN ACCORDANCE WITH OSHA HAZCOM
2012, 29 CFR 1910.1200
2.2 LABEL ELEMENTS:
OSHA HCS 2012:
OSHA HCS 2012: NO SIGNIFICANT HAZARD AS PER GHS
2.3 OTHER HAZARDS:
HEALTH HAZARDS:
NOT EXPECTED TO BE A HEALTH HAZARD WHEN USED UNDER NORMAL CONDITIONS.
PROLONGED OR REPEATED SKIN CONTACT WITHOUT PROPER CLEANING MAY CLOG THE
SKIN PORES RESULTING DISORDERS LIKE ACNE/FOLLICULITIS. USED GREASE MAY
CONTAIN HARMFUL IMPURITIES/ HARMFUL EXTRANEOUS SUBSTANCES.
SAFETY HAZARD: NOT CLASSIFIED AS FLAMMABLE BUT WILL BURN
ENVIRONMENTAL HAZARD:
NOT CLASSIFIED AS ENVIRONMENTAL HAZARD UNDER GHS CRITERIA
PRECAUTIONARY STATEMENTS:
PREVENTION:
WEAR PROTECTIVE GLOVES WHILE HANDLING. WEAR EYE AND FACE PROTECTION. WASH
HAND THOROUGHLY AFTER HANDLING
RESPONSE:
IF ON SKIN, WASH WITH PLENTY OF SOAP AND WATER. REMOVE CONTAMINATED CLOTH
AND WASH THOROUGHLY BEFORE USE. IF SKIN IRRITATION OCCURS, GET MEDICAL
ADVICE. IF IN EYES, WASH WITH WATER FOR SEVERAL MINUTES, IN CASE OF CONTACT
LENSES, REMOVE AND WASH WITH PLENTY WATER. IN CASE OF IRRITATION, GET
MEDICAL ATTENTION.
STORAGE:
STORE THE PRODUCT IN WELL-VENTILATED AREA. KEEP THE CONTAINER STRAIGHT LID
UPSIDE. DO NOT LAY DOWN UPSIDE DOWN OR DO NOT KEEP CONTAINER HORIZONTALLY.
THIS PRODUCT HAS NATURAL TENDENCY TO SQUEEZE OIL IF NOT KEPT PROPERLY.
DISPOSAL:
TAKE EXPERT ADVICE OF LOCAL REGULATORY AGENCY FOR DISPOSING THIS PRODUCT.
HAZARD NOT OTHERWISE CLASSIFIED (HNOC):
NONE AS CLASSIFIED UNDER 29 CFR 1900.1200
| SECTION 3: COMPOSITION / INFORMATION ON INGREDIENTS | |
THIS MATERIAL IS DEFINED AS MIXTURE AND HAS NO KNOWN HAZARDS UNDER GHS
CLASSIFICATION
ADDITIONAL INFORMATION:
AS PER 29 CFR 1910.1200 PARAGRAPH (I), FORMULATION IS CONSIDERED AS TRADE
SECRET AND THEREFORE SPECIFIC CHEMICAL NAMES AND THEIR PERCENTAGES OF
COMPONENTS USED HAVE NOT BEEN DISCLOSED. THE DETAILS ABOUT THEIR SPECIFIC
CHEMICAL NAMES AND THEIR PERCENTAGES MAY BE PROVIDED ON REQUEST TO HEALTH
PROFESSIONALS, AUTHORIZED REPRESENTATIVES OF REGULATORY AUTHORITY,
EMPLOYEES CONCERNED IN ACCORDANCE WITH APPLICABLE PROVISIONS OF THIS
PARAGRAPH.
| SECTION 4: FIRST AID MEASURES | |
4.1 DESCRIPTION OF FIRST AID MEASURES:
GENERAL INFORMATION:
NOT EXPECTED TO BE HEALTH HAZARD IF USED UNDER NORMAL CONDITIONS
INHALATION:
UNDER NORMAL CONDITIONS OF INTENDED USE, THIS MATERIAL IS NOT EXPECTED TO
BE INHALATION HAZARD. IF SOME SYMPTOM EXIST, REMOVE TO FRESH AIR. IF NOT
BREATHING, GIVE ARTIFICIAL RESPIRATION. GET MEDICAL ATTENTION
SKIN CONTACT:
REMOVE CONTAMINATED CLOTHES. FLUSH EXPOSED AREA WITH PLENTY OF WATER
FOLLOWED BY WASHING BY SOAP, IF AVAILABLE. IF PERSISTENT IRRITATION OCCURS,
OBTAIN MEDICAL ATTENTION. IF PRODUCT IS INJECTED INTO OR UNDER THE SKIN DUE
TO ANY REASON, THE VICTIM, REGARDLESS OF SIZE OR APPEARANCE OF WOUND,
VICTIM SHOULD BE BROUGHT IMMEDIATELY TO MEDICAL ATTENTION FOR EMERGENCY
SURGICAL NEEDS. THOUGH THE INITIAL SYMPTOMS DUE TO HIGH PRESSURE INJECTION
MAY BE MINIMAL / ABSENT, EARLY SURGICAL TREATMENT MAY SIGNIFICANTLY REDUCE
THE EXTENT OF INJURY.
EYE CONTACT:
IMMEDIATELY FLUSH WITH LARGE QUANTITIES OF COOL WATER FOR AT LEAST 15
MINUTES. GET MEDICAL ATTENTION.
INGESTION:
IN GENERAL NO TREATMENT IS NECESSARY UNLESS LARGE QUANTITIES ARE SWALLOWED,
HOWEVER, IT'S ADVISABLE TO TAKE MEDICAL ATTENTION. DO NOT INDUCE VOMITING
UNLESS DIRECTED BY MEDICAL PERSONNEL. DO NOT GIVE ANYTHING BY MOUTH BY AN
UNCONSCIOUS PERSON.
SELF-PROTECTION FOR FIRST AIDER:
WHEN ADMINISTERING THE FIRST AID, ENSURE THAT YOU ARE WEARING THE
APPROPRIATE PERSONAL PROTECTIVE EQUIPMENT ACCORDING TO THE INCIDENT,
INJURY AND SURROUNDINGS.
| SECTION 5: FIRE FIGHTING MEASURES | |
5.1 EXTINGUISHING MEDIA:
SUITABLE EXTINGUISHING MEDIA:
WATER SPRAY (FOG), DRY CHEMICAL, FOAM, OR CARBON DIOXIDE, SAND TO
EXTINGUISH FLAMES.
UNSUITABLE EXTINGUISHING MEDIA:
WATER STREAM MAY SPLASH BURNING LIQUID AND SPREAD FIRE.
5.2 SPECIAL HAZARD ARISING FROM THE SUBSTANCES OR MIXTURE:
HAZARDOUS COMBUSTION PRODUCT MAY INCLUDE A COMPLEX MIXTURE OF AIRBORNE
SOLID AND LIQUID PARTICULATES AND GASES (SMOKE), CARBON MONOXIDE,
UNIDENTIFIED INORGANIC AND ORGANIC COMPOUNDS.
5.3 ADVICE TO FIREFIGHTERS:
PROPER PROTECTIVE EQUIPMENT INCLUDE CHEMICAL RESISTANT GLOVES TO BE WORN,
CHEMICAL RESISTANT SUIT IS RECOMMENDED WHEN LARGE CONTACT WITH SPILL
PRODUCT IS EXPECTED. SELF-CONTAINED BREATHING APPARATUS (SCBA) MUST BE WORN
WHEN APPROACHING A FIRE IN CONFINED AREA. SELECT THE FIRE FIGHTERS CLOTHING
APPROVED BY RELEVANT STANDARD
| SECTION 6: ACCIDENTAL RELEASE MEASURES | |
6.1 PERSONAL PRECAUTIONS, PROTECTIVE EQUIPMENT AND EMERGENCY PROCEDURES:
FULLY ENCAPSULATING, VAPOR PROTECTIVE CLOTHING SHOULD BE WORN FOR SPILLS
AND LEAKS WITH NO FIRE. DO NOT TOUCH AND WALK THROUGH SPILL AREA. DO NOT
TOUCH DAMAGED CONTAINER OR SPILLED MATERIAL UNLESS WEARING APPROPRIATE
PROTECTIVE CLOTHING/EQUIPMENT. VENTILATE THE CLOSED AREA.
6.2 EMERGENCY PROCEDURES:
ISOLATE THE SPILL / LEAK AREA IN ALL DIRECTIONS FOR ABOUT 50 METERS
(150 FT) FOR LIQUIDS AND ABOUT 25 METERS (75 FT.) FOR SOLIDS AND
SEMI-SOLIDS. ELIMINATE ALL IGNITION SOURCES (NO SMOKING, FLARES, SPARKS /
FLAMES IN CLOSE VICINITY). KEEP UNAUTHORIZE PERSON AWAY AND VENTILATE
CLOSED SPACE BEFORE ENTERING.
6.3 ENVIRONMENTAL PROCEDURES:
USE APPROPRIATE MEASURES FOR CONTAINMENT OF SPILLED MATERIAL TO THE
ENVIRONMENT. PREVENT FROM ENTERING/ SPREADING TO DRAIN, WATER, RIVER,
DITCHES BY USING SAND, EARTH, FLOOR DRYERS OR OTHER APPROPRIATE BARRIERS.
6.4 METHODS AND MATERIALS FOR CONTAINMENT AND CLEANING UP:
SHOVEL INTO SUITABLE PROPERLY MARKED CONTAINER FOR DISPOSAL OR RECLAMATION
IN ACCORDANCE WITH LOCAL REGULATIONS.
6.5 REFERENCE TO OTHER SECTIONS:
REFER TO SECTION 8 - EXPOSURE CONTROL / PERSONAL PROTECTION AND SECTION
13 - DISPOSAL CONSIDERATIONS
| SECTION 7: HANDLING AND STORAGE | |
7.1 GENERAL PRECAUTIONS:
STORE IN WELL-VENTILATED AREA, IF RISK ON VAPOR INHALATION IS THERE. USE
THE INFORMATION IN THIS DATA SHEET AS INPUT FOR RISK MANAGEMENT ARISING DUE
TO LOCAL CONDITIONS WHICH HELP TO MANAGE SAFE HANDLING OF THIS PRODUCT.
7.2 PRECAUTIONS FOR SAFE HANDLING:
AVOID PROLONGED AND REPEATED CONTACT WITH SKIN. AVOID INHALING THE
VAPORS/MIST. WHEN HANDLING THE DRUMS, KEGS, PAILS ETC., PROPER SAFETY
SHOES, AND OTHER PROTECTIVE CLOTHES, SAFETY GLASSES ETC. SHOULD BE WORN.
DISPOSE APPROPRIATELY ANY CONTAMINATED RAGS/MATERIAL AS PER PREVAILING
LOCAL ALLOWABLE PRACTICES. KEEP CONTAINERS IN CLOSELY TIGHT AND, COOL AND
WELL VENTILATED AREAS.
7.3 CONDITIONS FOR SAFE STORAGE, INCLUDING ANY INCOMPATIBILITIES:
KEEP CONTAINERS TIGHTLY CLOSE, WELL-VENTILATED AREAS BUT COVERED, AVOIDING
CONTACT WITH RAIN OR OTHER WATER INGRESS POSSIBILITIES. KEEP THE STORAGE
PLACE COOL PREFERABLY <120 DEG. F / <50 DEG. C. HIGHER TEMPERATURE MAY
CREATE PRESSURE BUILDUP INSIDE CONTAINER AND CHANCES OF CONTAINER BUSTING
OR LEAKAGE MAY OCCUR UNDER AGGRAVATED CONDITIONS. KEEP AWAY FROM OTHER
OXIDIZING AND INCOMPATIBLE MATERIALS.
7.4 SPECIFIC END USE(S):
THIS MATERIAL SHOULD NOT BE USED FOR ANY OTHER PURPOSE THAN THE INTENDED
USE AS PER SECTION 1 WITHOUT THE EXPERT ADVICE.
| SECTION 8: EXPOSURE CONTROLS / PERSONAL PROTECTION | |
8.1 CONTROL PARAMETERS:
MATERIAL SOURCE TYPE PPM MG/M3
LITHIUM HYDROXIDE MONO AIHA CEILING 1.8 MG/M3
HYDRATE WEEL
MINERAL OIL ACGIH TWA-VACATED 5.0 MG/M3
AND TWA
ADDITIONAL INFORMATION:
DUE TO SEMI-SOLID NATURE OF THE PRODUCT, GENERATION OF MIST AND DUSTS IS
UNLIKELY TO OCCUR
BIOLOGICAL EXPOSURE INDEX (BEI): NO BIOLOGICAL LIMIT ALLOCATED
PNEC RELATED INFORMATION: DATA NOT AVAILABLE
MONITORING METHODS:
MONITORING OF THE CONCENTRATION OF SUBSTANCES IN THE BREATHING ZONE OF
WORKERS OR IN GENERAL WORKPLACE MAY BE REQUIRED TO CONFIRM THE COMPLIANCE
WITH LOCAL GOVERNING AUTHORITY.
8.2 ENGINEERING MEASURES/CONTROLS:
ADEQUATE VENTILATION SYSTEMS MAY BE NEEDED TO CONTROL CONCENTRATIONS OF
AIRBORNE CONTAMINANTS ABOVE PERMISSIBLE THRESHOLD APPLICABLE LIMITS.
8.3 PERSONAL PROTECTIVE EQUIPMENT PICTOGRAMS:
GLOVES
APRON
CHEMICAL GOGGLES
BOOTS
RESPIRATORY:
IN CASE OF INSUFFICIENT VENTILATION, USE SUITABLE RESPIRATORY EQUIPMENT
EYE/FACE: WEAR SAFETY GOGGLES
SKIN/BODY: WEAR SAFETY SHOES AND PROTECTIVE GLOVES
8.4 ENVIRONMENTAL EXPOSURE CONTROLS:
MINIMIZE RELEASE TO THE ENVIRONMENT. FOLLOW BEST PRACTICES FOR SITE
MANAGEMENT AND DISPOSAL OF WASTE AS PER LOCAL REGULATIONS
| SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES | |
INFORMATION ON PHYSICAL AND CHEMICAL PROPERTIES:
MATERIAL DESCRIPTION:
APPEARANCE: SEMI-SOLID
COLOR: AMBER
ODOR: SLIGHT HYDROCARBON
ODOR THRESHOLD: DATA NOT AVAILABLE
GENERAL PROPERTIES:
BOILING POINT: NO DATA AVAILABLE
PH: NOT APPLICABLE
SPECIFIC GRAVITY (15 DEG. C): 0.87, 7.506 (LBS/GAL)
FLASH POINT, COC, DEG. F/DEG. C: 400 / 204
UPPER/LOWER FLAMMABILITY LIMITS: NO DATA AVAILABLE
AUTO-IGNITION TEMPERATURE: NO DATA AVAILABLE
FLAMMABILITY: NO DATA AVAILABLE
VOC, % WT., ASTM D-972: 1
VAPOR PRESSURE @ AMBIENT TEMP.: <0.13 KPA (<1 MMHg)
VAPOR DENSITY (AIR = 1): <1
EXPLOSIVE PROPERTIES: NOT CLASSIFIED
OXIDIZING PROPERTIES: NO DATA AVAILABLE
OTHER INFORMATION:
ELECTRICAL CONDUCTIVITY:
THOUGH NO DATA AVAILABLE, THIS MATERIAL IS NOT EXPECTED TO BE A STATIC
ACCUMULATOR
| SECTION 10: STABILITY AND REACTIVITY | |
10.1 REACTIVITY:
NO REACTIVITY IS EXPECTED UNDER NORMAL CONDITIONS OF INTENDED USE. HOWEVER,
UNDER HIGH TEMPERATURE OR ADVERSE OPERATING CONDITIONS THERMAL / CHEMICAL
DECOMPOSITION OF THE PRODUCT MAY BE POSSIBLE
10.2 CHEMICAL STABILITY:
NO HAZARDOUS REACTION IS EXPECTED UNDER NORMAL CONDITIONS OF TEMPERATURE
AND PRESSURE
10.3 POSSIBILITY OF HAZARDOUS REACTIONS:
HAZARDOUS POLYMERIZATION IS NOT EXPECTED. REACTS WITH STRONG OXIDIZING
AGENTS.
10.4 CONDITIONS TO AVOID:
EXTREME TEMPERATURE AND DIRECT SUNLIGHT / HEAT /FLAME
10.5 INCOMPATIBLE MATERIALS: STRONG OXIDIZING AGENTS
10.6 HAZARDOUS DECOMPOSITION PRODUCTS:
HAZARDOUS DECOMPOSITION IS NOT EXPECTED TO FORM UNDER NORMAL CONDITIONS OF
STORAGE
| SECTION 11: TOXICOLOGICAL INFORMATION | |
11.1 INFORMATION ON TOXICOLOGICAL EFFECTS:
BASIS OF ASSESSMENT:
INFORMATION GIVEN HEREBY IS BASED ON THE COMPONENTS AND THE TOXICOLOGY OF
SIMILAR PRODUCTS AND THE DATA INDICATED HERE ARE REPRESENTATIVE OF THE
PRIMARILY BASE OIL WHICH IS PRESENT IN MAJORITY
ACUTE ORAL TOXICITY:
EXPECTED TO BE LOW TOXICITY; LD50 (RAT): >5000 MG/KG
ACUTE DERMAL TOXICITY:
EXPECTED TO BE LOW TOXICITY; LD50 (RAT): >3000 MG/KG
ACUTE INHALATION TOXICITY: NOT DETERMINED
SKIN CORROSION / IRRITATION:
EXPECTED TO BE SLIGHTLY IRRITATING. PROLONGED/REPEATED CONTACT WITH SKIN
WITHOUT ADEQUATE CLEANING MAY CLOG THE PORES OF THE SKIN, MAY RESULT
DISORDER SUCH AS OIL ACNE/FOLLICULITIS
SERIOUS EYE DAMAGE / IRRITATION: EXPECTED TO BE SLIGHTLY IRRITATING
RESPIRATORY / SKIN SENSITIZATION: NOT DETERMINED
ASPIRATION HAZARD: NOT EXPECTED TO BE ASPIRATION HAZARD
GERM CELL MUTAGENICITY: NOT EXPECTED A MUTAGENIC HAZARD
CARCINOGENICITY:
NOT CONSIDERED TO BE CARCINOGENIC AS IT CONTAIN SEVERELY HYDROTREATED
MINERAL OILS WHICH ARE REPORTED TO BE NON-CARCINOGENIC IN LAB ANIMAL
STUDIES. THE CLASS OF OILS USED IN MAKING THIS PRODUCT ARE NOT CLASSIFIED
AS CARCINOGENIC BY IARC
11.2 MATERIAL CARCINOGENICITY CLASSIFICATION
HIGHLY REFINED BASE OIL BLEND ACGIH GROUP A4; NOT CLASSIFIED AS HUMAN
(IP 346 <3%) CARCINOGEN
IARC 3; NOT CLASSIFIED AS TO CARCINOGEN TO
HUMANS
GHS / CLP, NO CARCINOGENICITY
CLASSIFICATION
BASED ON OUR RAW MATERIAL SUPPLIERS INFORMATION/SDS, THIS MATERIAL IS NOT
KNOWN TO CONTAIN ANY CHEMICAL LISTED AS A CARCINOGEN OR SUSPECTED
CARCINOGEN BY OSHA HAZARD COMMUNICATION STANDARD 29CFR 1910.1200, IARC, OR
THE NATIONAL TOXICOLOGY PROGRAM (NTP).
| SECTION 12: ECOLOGICAL INFORMATION | |
BASIS OF ASSESSMENT:
ECO-TOXICOLOGICAL DATA HAS NOT BEEN DETERMINED SPECIFICALLY ON THIS
PRODUCT. THE INFORMATION GIVEN HEREWITH ARE BASED ON THE INFORMATION GIVEN
ON ECO-TOXICITY OF COMPONENTS AND/OR ON SIMILAR PRODUCTS. THE INFORMATION
GIVEN HERE ARE REPRESENTATIVE OF THE PRODUCT AS WHOLE AND NOT AS INDIVIDUAL
COMPONENTS
12.1 TOXICITY:
SPARINGLY SOLUBLE MIXTURE IN AQUEOUS MEDIA. NOT TOXIC TO FISH BUT MAY COAT
GILL STRUCTURE AND CAUSE SUFFOCATION IF SPILLED. THIS PRODUCT MAY CAUSE
GASTROINTESTINAL DISTRESS IN BIRDS AND MAMMALS THROUGH INGESTION.
12.2 PERSISTENCE AND DEGRADABILITY:
EXPECTED TO BE NOT READILY BIODEGRADABLE. THE MAJOR OIL COMPONENT EXPECTED
TO BIODEGRADE OVER PERIOD OF 100-120 DAYS IN AEROBIC ENVIRONMENT AT
TEMPERATURE ABOVE 70 F (21 DEG. C), HOWEVER FINISHED PRODUCT CONTAIN
COMPONENT THAT MAY PERSIST IN THE ENVIRONMENT.
12.3 BIOACCUMULATIVE POTENTIAL: MAY CONTAIN COMPONENT THAT BIOACCUMULATE
12.4 MOBILITY IN SOIL:
PRODUCT IS SEMI-SOLID IN NATURE IN MOST CONDITIONS AND MAY ABSORB TO SOIL
AND MAY NOT BE MOBILE. IT FLOATS ON WATER
12.5 OTHER ADVERSE EFFECTS:
PRODUCT CONTAIN THE COMPONENTS THAT HAVE BEEN CLASSIFIED NON-VOLATILE IN
NATURE AND THEREFORE NOT EXPECTED TO RELEASE TO ENVIRONMENT IN SIGNIFICANT
QUANTITIES.
| SECTION 13: DISPOSAL INFORMATION | |
13.1 WASTE TREATMENT METHODS:
PRODUCT DISPOSAL:
TRY TO MINIMIZE THE PRODUCT WASTE BY USING BEST APPLICABLE PRACTICES. IT IS
THE RESPONSIBILITY OF THE WASTE GENERATOR TO EVALUATE THE WASTE
CLASSIFICATION AND APPROPRIATE DISPOSAL METHODOLOGY IN ACCORDANCE WITH THE
APPLICABLE REGULATION. DO NOT DISPOSE IN TO ENVIRONMENT, IN DRAIN OR IN
RIVER / PONDS / WATER RESERVOIRS.
CONTAINER DISPOSAL:
TO BE DISPOSED IN ACCORDANCE WITH LOCAL PREVAILING AND ALLOWABLE
REGULATIONS.
| SECTION 14: TRANSPORT INFORMATION | |
BULK SHIPPING NON-BULK IDENTIFICATION # HAZARDOUS
SHIPPING CLASS
US DOT NOT REQUIRED NOT REQUIRED NOT REQUIRED NOT REQUIRED
CANADIAN NOT REQUIRED NOT REQUIRED NOT REQUIRED NOT REQUIRED
TDG
EUROPEAN NOT REQUIRED NOT REQUIRED NOT REQUIRED NOT REQUIRED
ADR, IMDG, NOT CLASSIFIED AS HAZARDOUS PRODUCT FOR LAND, SEA AND AIR
IATA-DGR TRANSPORT
| SECTION 15: REGULATORY INFORMATION | |
OSHA HAZARD COMMUNICATION STANDARD:
THIS MATERIAL IS NOT CONSIDERED HAZARDOUS IN ACCORDANCE WITH OSHA HAZCOM
2012, 29 CFR 1910.1200.
US INVENTORY LIST (TSCA 8B): ALL COMPONENTS ARE LISTED OR EXEMPTED
SARA (302/304): NO PRODUCTS WERE FOUND
SARA (311/312):
CLASSIFICATION:
IMMEDIATE (ACUTE) HEALTH HAZARD, DELAYED (CHRONIC) HEALTH HAZARD
COMPONENT FIRE HAZARD SUDDEN RELEASE REACTIVE ACUTE DELAYED
OF PRESSURE HEALTH HEALTH
HAZARD HAZARD
BASE OIL NO NO NO NO YES
LITHIUM 12 YES NO NO YES NOT KNOWN
HYDROXY
STEARATE
SARA (313) TOXIC RELEASE INVENTORY:
THIS MATERIAL CONTAINS NO CHEMICALS SUBJECT TO THE SUPPLIER NOTIFICATION
REQUIREMENTS OF THE SARA 313 TOXIC RELEASE PROGRAM
MASSACHUSETTS: NONE OF THE COMPONENTS ARE LISTED
NEW YORK: NONE OF THE COMPONENTS ARE LISTED
NEW JERSEY: LITHIUM HYDROXIDE IS LISTED
WHMIS: THIS PRODUCT IS NOT A CONTROLLED PRODUCT
CANADIAN NPRI: NONE OF THE COMPONENTS ARE LISTED
CEPA TOXIC SUBSTANCE: NONE OF THE COMPONENTS ARE LISTED
CANADIAN INVENTORY LIST: ALL COMPONENTS ARE LISTED OR EXEMPTED
AUSRALIA INVENTORY (AICS): ALL COMPONENTS ARE LISTED OR EXEMPTED
CHINA INVENTORY (IECSC): ALL COMPONENTS ARE LISTED OR EXEMPTED
JAPAN INVENTORY: NOT DETERMINED
KOREA INVENTORY: ALL COMPONENTS ARE LISTED OR EXEMPTED
MALAYSIA INVENTORY (EHS REGISTER): NOT DETERMINED
NEW ZEALAND INVENTORY OF CHEMICALS (NZLOC):
ALL COMPONENTS ARE LISTED OR EXEMPTED
PHILIPINES INVENTORY (PICCS): ALL COMPONENTS ARE LISTED OR EXEMPTED
TAIWAN INVENTORY (CSNN): NOT DETERMINED
| SECTION 16: OTHER INFORMATION | |
NFPA 704 NPCA-HMIS
HEALTH 1 1
FIRE 1 1
REACTIVITY 0 0
SPECIFIC NONE N/A
KEY:
0 = MINIMAL
1 = SLIGHT
2 = MODERATE
3 = SERIOUS
THIS SAFETY DATA SHEET CONTAINS THE FOLLOWING REVISIONS:
REVISION DATE: JUNE 19, 2015
SUPERSEDES: NONE
PLEWS, INC. BELIEVES THAT THE INFORMATION AND RECOMMENDATIONS GIVEN HEREBY
IS BASED REPORTED INFORMATION BASED ON THE COMPONENTS AND OF SIMILAR
PRODUCTS. THE DATA INDICATED HERE ARE REPRESENTATIVE OF THE PRODUCT AS
WHOLE RATHER THAN FOR INDIVIDUAL COMPONENTS. NO WARRANTY OF FITNESS,
WARRANTY OF MERCHANTABILITY OR ANY OTHER WARRANTY, EXPRESSED OR IMPLIED, IS
MADE CONCERNING THE INFORMATION PROVIDED HEREIN. THE INFORMATION PROVIDED
HEREIN RELATES ONLY TO THE SPECIFIC PRODUCT DESIGNATED AND MAY NOT BE VALID
WHERE SUCH PRODUCT IS USED IN COMBINATION WITH ANY OTHER MATERIALS OR
PROCESS. FURTHER, SINCE THE CONDITIONS AND METHODS OF USE OF THIS PRODUCT
AND OF THE INFORMATION REFERRED TO HEREIN ARE BEYOND THE CONTROL OF PLEWS,
INC., PLEWS, INC. EXPRESSLY DISCLAIMS ANY AND ALL LIABILITY AS TO ANY
RESULTS OBTAINED OR ARISING FROM ANY USE OF THE PRODUCT OR RELIANCE ON SUCH
INFORMATION.