| Common Name: | VELOCITE OIL NO. 3 |
| Manufacturer: | EXXON MOBIL |
| SDS Revision Date: | 7/27/2017 |
| SDS Format: | GHS-AU |
| Item Number(s): | 5ZN14 |
| Manufacturer Model Number(s): |
SDS Table of Contents
Click the desired link below to jump directly to that section in the SDS.
EXXONMOBIL
PRODUCT NAME: MOBIL VELOCITE OIL NO. 3
REVISION DATE: 27 JUL 2017
SAFETY DATA SHEET
| SECTION 1 PRODUCT AND COMPANY IDENTIFICATION |  |
PRODUCT:
PRODUCT NAME: MOBIL VELOCITE OIL NO. 3
PRODUCT DESCRIPTION: HYDROCARBONS AND ADDITIVES
PRODUCT CODE: 201560509060, 600643-85
INTENDED USE: LUBRICANT
COMPANY IDENTIFICATION:
SUPPLIER:
EAST COAST LUBES PTY LTD (QUEENSLAND AND NORTHERN TERRITORY)
A.B.N. 37 117 203 611
CNR NORTH AND MORT STREETS
TOOWOOMBA, QUEENSLAND 4350
AUSTRALIA
24 HOUR EMERGENCY TELEPHONE: 1300 131 001
SUPPLIER GENERAL CONTACT: 1800 069 019
SUPPLIER:
SOUTHERN CROSS LUBES (VICTORIA AND TASMANIA)
58-66 AJAX ROAD
ALTONA, VICTORIA 3018
AUSTRALIA
24 HOUR EMERGENCY TELEPHONE: 1300 131 001
PRODUCT TECHNICAL INFORMATION:
SUPPLIER GENERAL CONTACT:
1300 466 245
1300 552 861
SUPPLIER:
PERKAL PTY LTD TRADING AS STATEWIDE OIL (WESTERN AUSTRALIA)
A.B.N. 43 009 283 363
14 BEETE STREET
WELSHPOOL, WESTERN AUSTRALIA 6106
AUSTRALIA
24 HOUR EMERGENCY TELEPHONE (8:00AM TO 4:30PM MON TO FRI): 1300 919 904
PRODUCT TECHNICAL INFORMATION:
SUPPLIER GENERAL CONTACT:
(08) 9350 6777
(08) 9350 6777
SUPPLIER:
PERKAL PTY LTD TRADING AS STATEWIDE OIL (SOUTH AUSTRALIA)
A.B.N. 43 009 283 363
6-10 STREIFF RD
WINGFIELD, SOUTH AUSTRALIA 5013
AUSTRALIA
24 HOUR EMERGENCY TELEPHONE (8:00AM TO 4:30PM MON TO FRI): 1300 919 904
PRODUCT TECHNICAL INFORMATION:
SUPPLIER GENERAL CONTACT:
(08) 8359 8995
(08) 8359 8995
| SECTION 2 HAZARDS IDENTIFICATION | |
THIS MATERIAL IS HAZARDOUS ACCORDING TO REGULATORY GUIDELINES (SEE (M)SDS
SECTION 15).
GHS CLASSIFICATION:
FLAMMABLE LIQUID: CATEGORY 4.
ASPIRATION TOXICANT: CATEGORY 1.
GHS LABEL ELEMENTS:
PICTOGRAM: HEALTH HAZARD
SIGNAL WORD: DANGER
HAZARD STATEMENTS:
PHYSICAL:
H227: COMBUSTIBLE LIQUID.
HEALTH:
H304: MAY BE FATAL IF SWALLOWED AND ENTERS AIRWAYS.
PRECAUTIONARY STATEMENTS:
PREVENTION:
P210: KEEP AWAY FROM FLAMES AND HOT SURFACES. NO SMOKING.
P280: WEAR PROTECTIVE GLOVES AND EYE / FACE PROTECTION.
RESPONSE:
P301 + P310:
IF SWALLOWED: IMMEDIATELY CALL A POISON CENTER OR DOCTOR/PHYSICIAN.
P331: DO NOT INDUCE VOMITING.
P370 + P378:
IN CASE OF FIRE:
USE WATER FOG, FOAM, DRY CHEMICAL OR CARBON DIOXIDE (CO2) TO EXTINGUISH.
STORAGE:
P403 + P235: STORE IN A WELL-VENTILATED PLACE. KEEP COOL.
P405: STORE LOCKED UP.
DISPOSAL:
P501:
DISPOSE OF CONTENTS AND CONTAINER IN ACCORDANCE WITH LOCAL REGULATIONS.
CONTAINS: DISTILLATES (PETROLEUM), HYDROTREATED LIGHT
OTHER HAZARD INFORMATION:
PHYSICAL / CHEMICAL HAZARDS:
MATERIAL CAN ACCUMULATE STATIC CHARGES WHICH MAY CAUSE AN IGNITION.
MATERIAL CAN RELEASE VAPOURS THAT READILY FORM FLAMMABLE MIXTURES.
VAPOUR ACCUMULATION COULD FLASH AND/OR EXPLODE IF IGNITED. COMBUSTIBLE.
HEALTH HAZARDS:
HIGH-PRESSURE INJECTION UNDER SKIN MAY CAUSE SERIOUS DAMAGE. REPEATED
EXPOSURE MAY CAUSE SKIN DRYNESS OR CRACKING. EXCESSIVE EXPOSURE MAY
RESULT IN EYE, SKIN, OR RESPIRATORY IRRITATION.
ENVIRONMENTAL HAZARDS: NO SIGNIFICANT HAZARDS.
NOTE:
THIS MATERIAL SHOULD NOT BE USED FOR ANY OTHER PURPOSE THAN THE INTENDED
USE IN SECTION 1 WITHOUT EXPERT ADVICE. HEALTH STUDIES HAVE SHOWN THAT
CHEMICAL EXPOSURE MAY CAUSE POTENTIAL HUMAN HEALTH RISKS WHICH MAY VARY
FROM PERSON TO PERSON.
| SECTION 3 COMPOSITION / INFORMATION ON INGREDIENTS | |
THIS MATERIAL IS DEFINED AS A MIXTURE.
REPORTABLE HAZARDOUS SUBSTANCE(S) OR COMPLEX SUBSTANCE(S):
NAME CAS# CONCENTRATION* GHS HAZARD CODES
2,6-DITERTBUTYL PHENOL 128-39-2 0.1 - <0.25% H315, H400(M FACTOR
1), H410(M FACTOR 1)
DISTILLATES 64742-47-8 70 - <80% H227, H304
(PETROLEUM),
HYDROTREATED
LIGHT
HYDROTREATED LIGHT 64742-55-8 20 - <30% H304
PARAFFINIC
DISTILLATES,
PETROLEUM
* ALL CONCENTRATIONS ARE PERCENT BY WEIGHT UNLESS INGREDIENT IS A GAS. GAS
CONCENTRATIONS ARE IN PERCENT BY VOLUME. OTHER INGREDIENTS DETERMINED NOT
TO BE HAZARDOUS UP TO 100%.
| SECTION 4 FIRST AID MEASURES | |
INHALATION:
REMOVE FROM FURTHER EXPOSURE. FOR THOSE PROVIDING ASSISTANCE, AVOID
EXPOSURE TO YOURSELF OR OTHERS. USE ADEQUATE RESPIRATORY PROTECTION. IF
RESPIRATORY IRRITATION, DIZZINESS, NAUSEA, OR UNCONSCIOUSNESS OCCURS, SEEK
IMMEDIATE MEDICAL ASSISTANCE. IF BREATHING HAS STOPPED, ASSIST VENTILATION
WITH A MECHANICAL DEVICE OR USE MOUTH-TO-MOUTH RESUSCITATION.
SKIN CONTACT:
WASH CONTACT AREAS WITH SOAP AND WATER. REMOVE CONTAMINATED CLOTHING.
LAUNDER CONTAMINATED CLOTHING BEFORE REUSE. IF PRODUCT IS INJECTED INTO OR
UNDER THE SKIN, OR INTO ANY PART OF THE BODY, REGARDLESS OF THE APPEARANCE
OF THE WOUND OR ITS SIZE, THE INDIVIDUAL SHOULD BE EVALUATED IMMEDIATELY
BY A PHYSICIAN AS A SURGICAL EMERGENCY. EVEN THOUGH INITIAL SYMPTOMS FROM
HIGH PRESSURE INJECTION MAY BE MINIMAL OR ABSENT, EARLY SURGICAL TREATMENT
WITHIN THE FIRST FEW HOURS MAY SIGNIFICANTLY REDUCE THE ULTIMATE EXTENT OF
INJURY.
EYE CONTACT:
FLUSH THOROUGHLY WITH WATER. IF IRRITATION OCCURS, GET MEDICAL ASSISTANCE.
INGESTION: SEEK IMMEDIATE MEDICAL ATTENTION. DO NOT INDUCE VOMITING.
NOTE TO PHYSICIAN:
IF INGESTED, MATERIAL MAY BE ASPIRATED INTO THE LUNGS AND CAUSE CHEMICAL
PNEUMONITIS. TREAT APPROPRIATELY.
| SECTION 5 FIRE FIGHTING MEASURES | |
EXTINGUISHING MEDIA:
APPROPRIATE EXTINGUISHING MEDIA:
USE WATER FOG, FOAM, DRY CHEMICAL OR CARBON DIOXIDE (CO2) TO EXTINGUISH
FLAMES.
INAPPROPRIATE EXTINGUISHING MEDIA: STRAIGHT STREAMS OF WATER
FIRE FIGHTING:
FIRE FIGHTING INSTRUCTIONS:
EVACUATE AREA. PREVENT RUN-OFF FROM FIRE CONTROL OR DILUTION FROM ENTERING
STREAMS, SEWERS OR DRINKING WATER SUPPLY. FIRE-FIGHTERS SHOULD USE STANDARD
PROTECTIVE EQUIPMENT AND IN ENCLOSED SPACES, SELF-CONTAINED BREATHING
APPARATUS (SCBA). USE WATER SPRAY TO COOL FIRE EXPOSED SURFACES AND TO
PROTECT PERSONNEL.
UNUSUAL FIRE HAZARDS:
COMBUSTIBLE. HAZARDOUS MATERIAL. FIREFIGHTERS SHOULD CONSIDER PROTECTIVE
EQUIPMENT INDICATED IN SECTION 8.
HAZARDOUS COMBUSTION PRODUCTS:
ALDEHYDES, INCOMPLETE COMBUSTION PRODUCTS, OXIDES OF CARBON, SMOKE, FUME,
SULPHUR OXIDES
FLAMMABILITY PROPERTIES:
FLASH POINT [METHOD]: >76 DEG. C (169 DEG. F) [ASTM D-92]
FLAMMABLE LIMITS (APPROXIMATE VOLUME % IN AIR):
LEL: N/D
UEL: N/D
AUTOIGNITION TEMPERATURE: N/D
| SECTION 6 ACCIDENTAL RELEASE MEASURES | |
NOTIFICATION PROCEDURES:
IN THE EVENT OF A SPILL OR ACCIDENTAL RELEASE, NOTIFY RELEVANT AUTHORITIES
IN ACCORDANCE WITH ALL APPLICABLE REGULATIONS.
PROTECTIVE MEASURES:
AVOID CONTACT WITH SPILLED MATERIAL. WARN OR EVACUATE OCCUPANTS IN
SURROUNDING AND DOWNWIND AREAS IF REQUIRED, DUE TO TOXICITY OR FLAMMABILITY
OF THE MATERIAL. SEE SECTION 5 FOR FIRE FIGHTING INFORMATION. SEE THE
HAZARD IDENTIFICATION SECTION FOR SIGNIFICANT HAZARDS. SEE SECTION 4 FOR
FIRST AID ADVICE. SEE SECTION 8 FOR ADVICE ON THE MINIMUM REQUIREMENTS FOR
PERSONAL PROTECTIVE EQUIPMENT. ADDITIONAL PROTECTIVE MEASURES MAY BE
NECESSARY, DEPENDING ON THE SPECIFIC CIRCUMSTANCES AND/OR THE EXPERT
JUDGMENT OF THE EMERGENCY RESPONDERS.
FOR EMERGENCY RESPONDERS:
RESPIRATORY PROTECTION:
HALF-FACE OR FULL-FACE RESPIRATOR WITH FILTER(S) FOR ORGANIC VAPOR AND,
WHEN APPLICABLE, H2S, OR SELF CONTAINED BREATHING APPARATUS (SCBA) CAN BE
USED DEPENDING ON THE SIZE OF SPILL AND POTENTIAL LEVEL OF EXPOSURE. IF THE
EXPOSURE CANNOT BE COMPLETELY CHARACTERIZED OR AN OXYGEN DEFICIENT
ATMOSPHERE IS POSSIBLE OR ANTICIPATED, SCBA IS RECOMMENDED. WORK GLOVES
THAT ARE RESISTANT TO AROMATIC HYDROCARBONS ARE RECOMMENDED.
NOTE:
GLOVES MADE OF POLYVINYL ACETATE (PVA) ARE NOT WATER-RESISTANT AND ARE NOT
SUITABLE FOR EMERGENCY USE. CHEMICAL GOGGLES ARE RECOMMENDED IF SPLASHES OR
CONTACT WITH EYES IS POSSIBLE.
SMALL SPILLS: NORMAL ANTISTATIC WORK CLOTHES ARE USUALLY ADEQUATE.
LARGE SPILLS:
FULL BODY SUIT OF CHEMICAL RESISTANT, ANTISTATIC MATERIAL IS RECOMMENDED.
SPILL MANAGEMENT:
LAND SPILL:
ELIMINATE ALL IGNITION SOURCES (NO SMOKING, FLARES, SPARKS OR FLAMES IN
IMMEDIATE AREA). STOP LEAK IF YOU CAN DO SO WITHOUT RISK. ALL EQUIPMENT
USED WHEN HANDLING THE PRODUCT MUST BE GROUNDED. DO NOT TOUCH OR WALK
THROUGH SPILLED MATERIAL. PREVENT ENTRY INTO WATERWAYS, SEWER, BASEMENTS OR
CONFINED AREAS. A VAPOUR-SUPPRESSING FOAM MAY BE USED TO REDUCE VAPOUR. USE
CLEAN NON-SPARKING TOOLS TO COLLECT ABSORBED MATERIAL. ABSORB OR COVER WITH
DRY EARTH, SAND OR OTHER NON-COMBUSTIBLE MATERIAL AND TRANSFER TO
CONTAINERS.
LARGE SPILLS:
WATER SPRAY MAY REDUCE VAPOUR, BUT MAY NOT PREVENT IGNITION IN ENCLOSED
SPACES. RECOVER BY PUMPING OR WITH SUITABLE ABSORBENT.
WATER SPILL:
STOP LEAK IF YOU CAN DO SO WITHOUT RISK. CONFINE THE SPILL IMMEDIATELY
WITH BOOMS. WARN OTHER SHIPPING. REMOVE FROM THE SURFACE BY SKIMMING OR
WITH SUITABLE ABSORBENTS. SEEK THE ADVICE OF A SPECIALIST BEFORE USING
DISPERSANTS.
WATER SPILL AND LAND SPILL RECOMMENDATIONS ARE BASED ON THE MOST LIKELY
SPILL SCENARIO FOR THIS MATERIAL; HOWEVER, GEOGRAPHIC CONDITIONS, WIND,
TEMPERATURE, (AND IN THE CASE OF A WATER SPILL) WAVE AND CURRENT DIRECTION
AND SPEED MAY GREATLY INFLUENCE THE APPROPRIATE ACTION TO BE TAKEN. FOR
THIS REASON, LOCAL EXPERTS SHOULD BE CONSULTED.
NOTE: LOCAL REGULATIONS MAY PRESCRIBE OR LIMIT ACTION TO BE TAKEN.
ENVIRONMENTAL PRECAUTIONS:
LARGE SPILLS:
DYKE FAR AHEAD OF LIQUID SPILL FOR LATER RECOVERY AND DISPOSAL. PREVENT
ENTRY INTO WATERWAYS, SEWERS, BASEMENTS OR CONFINED AREAS.
| SECTION 7 HANDLING AND STORAGE | |
HANDLING:
ELIMINATE ALL IGNITION SOURCES (NO SMOKING, FLARES, SPARKS OR FLAMES IN
IMMEDIATE AREA). AVOID CONTACT WITH SKIN. PREVENT SMALL SPILLS AND LEAKAGE
TO AVOID SLIP HAZARD. MATERIAL CAN ACCUMULATE STATIC CHARGES WHICH MAY
CAUSE AN ELECTRICAL SPARK (IGNITION SOURCE). WHEN THE MATERIAL IS HANDLED
IN BULK, AN ELECTRICAL SPARK COULD IGNITE ANY FLAMMABLE VAPORS FROM LIQUIDS
OR RESIDUES THAT MAY BE PRESENT (E.G., DURING SWITCH-LOADING OPERATIONS).
USE PROPER BONDING AND/OR EARTHING PROCEDURES. HOWEVER, BONDING AND
EARTHING MAY NOT ELIMINATE THE HAZARD FROM STATIC ACCUMULATION. CONSULT
LOCAL APPLICABLE STANDARDS FOR GUIDANCE. ADDITIONAL REFERENCES INCLUDE
AMERICAN PETROLEUM INSTITUTE 2003 (PROTECTION AGAINST IGNITIONS ARISING OUT
OF STATIC, LIGHTNING AND STRAY CURRENTS) OR NATIONAL FIRE PROTECTION AGENCY
77 (RECOMMENDED PRACTICE ON STATIC ELECTRICITY) OR CENELEC CLC/TR 50404
(ELECTROSTATICS - CODE OF PRACTICE FOR THE AVOIDANCE OF HAZARDS DUE TO
STATIC ELECTRICITY).
STATIC ACCUMULATOR: THIS MATERIAL IS A STATIC ACCUMULATOR.
STORAGE:
THE TYPE OF CONTAINER USED TO STORE THE MATERIAL MAY AFFECT STATIC
ACCUMULATION AND DISSIPATION. DO NOT STORE IN OPEN OR UNLABELLED
CONTAINERS. KEEP CONTAINER CLOSED. HANDLE CONTAINERS WITH CARE. OPEN
SLOWLY IN ORDER TO CONTROL POSSIBLE PRESSURE RELEASE. STORE IN A COOL,
WELL-VENTILATED AREA.
MATERIAL IS DEFINED UNDER THE NATIONAL STANDARD [NOHSC:1015] STORAGE AND
HANDLING OF WORKPLACE DANGEROUS GOODS.
| SECTION 8 EXPOSURE CONTROLS / PERSONAL PROTECTION | |
EXPOSURE LIMIT VALUES:
EXPOSURE LIMITS/STANDARDS (NOTE: EXPOSURE LIMITS ARE NOT ADDITIVE):
SUBSTANCE NAME FORM LIMIT/STANDARD NOTE SOURCE
HYDROTREATED MIST. TWA: 5 MG/M3 AUSTRALIA OELS
LIGHT PARAFFINIC
DISTILLATES,
PETROLEUM
HYDROTREATED MIST. TWA: 5 MG/M3 ACGIH
LIGHT PARAFFINIC
DISTILLATES,
PETROLEUM
MOBIL VELOCITE TOTAL TWA: EXXONMOBIL
OIL NO. 3 VAPOUR 1200 MG/M3
AND 143 PPM
AEROSOL.
NOTE:
LIMITS/STANDARDS SHOWN FOR GUIDANCE ONLY. FOLLOW APPLICABLE REGULATIONS.
BIOLOGICAL LIMITS: NO BIOLOGICAL LIMITS ALLOCATED.
ENGINEERING CONTROLS:
THE LEVEL OF PROTECTION AND TYPES OF CONTROLS NECESSARY WILL VARY
DEPENDING UPON POTENTIAL EXPOSURE CONDITIONS.
CONTROL MEASURES TO CONSIDER:
USE EXPLOSION-PROOF VENTILATION EQUIPMENT TO STAY BELOW EXPOSURE LIMITS.
PERSONAL PROTECTION:
PERSONAL PROTECTIVE EQUIPMENT SELECTIONS VARY BASED ON POTENTIAL EXPOSURE
CONDITIONS SUCH AS APPLICATIONS, HANDLING PRACTICES, CONCENTRATION AND
VENTILATION. INFORMATION ON THE SELECTION OF PROTECTIVE EQUIPMENT FOR USE
WITH THIS MATERIAL, AS PROVIDED BELOW, IS BASED UPON INTENDED, NORMAL
USAGE.
RESPIRATORY PROTECTION:
IF ENGINEERING CONTROLS DO NOT MAINTAIN AIRBORNE CONTAMINANT CONCENTRATIONS
AT A LEVEL WHICH IS ADEQUATE TO PROTECT WORKER HEALTH, AN APPROVED
RESPIRATOR MAY BE APPROPRIATE. RESPIRATOR SELECTION, USE, AND MAINTENANCE
MUST BE IN ACCORDANCE WITH REGULATORY REQUIREMENTS, IF APPLICABLE.
TYPES OF RESPIRATORS TO BE CONSIDERED FOR THIS MATERIAL INCLUDE:
PARTICULATE
NO SPECIAL REQUIREMENTS UNDER ORDINARY CONDITIONS OF USE AND WITH ADEQUATE
VENTILATION.
FOR HIGH AIRBORNE CONCENTRATIONS, USE AN APPROVED SUPPLIED-AIR RESPIRATOR,
OPERATED IN POSITIVE PRESSURE MODE. SUPPLIED AIR RESPIRATORS WITH AN ESCAPE
BOTTLE MAY BE APPROPRIATE WHEN OXYGEN LEVELS ARE INADEQUATE, GAS/VAPOUR
WARNING PROPERTIES ARE POOR, OR IF AIR PURIFYING FILTER CAPACITY/RATING MAY
BE EXCEEDED.
HAND PROTECTION:
ANY SPECIFIC GLOVE INFORMATION PROVIDED IS BASED ON PUBLISHED LITERATURE
AND GLOVE MANUFACTURER DATA. GLOVE SUITABILITY AND BREAKTHROUGH TIME WILL
DIFFER DEPENDING ON THE SPECIFIC USE CONDITIONS. CONTACT THE GLOVE
MANUFACTURER FOR SPECIFIC ADVICE ON GLOVE SELECTION AND BREAKTHROUGH TIMES
FOR YOUR USE CONDITIONS. INSPECT AND REPLACE WORN OR DAMAGED GLOVES.
THE TYPES OF GLOVES TO BE CONSIDERED FOR THIS MATERIAL INCLUDE:
NITRILE, VITON
IF PROLONGED OR REPEATED CONTACT IS LIKELY, CHEMICAL-RESISTANT GLOVES ARE
RECOMMENDED. IF CONTACT WITH FOREARMS IS LIKELY, WEAR GAUNTLET-STYLE
GLOVES.
EYE PROTECTION:
IF CONTACT IS LIKELY, SAFETY GLASSES WITH SIDE SHIELDS ARE RECOMMENDED.
SKIN AND BODY PROTECTION:
ANY SPECIFIC CLOTHING INFORMATION PROVIDED IS BASED ON PUBLISHED LITERATURE
OR MANUFACTURER DATA.
THE TYPES OF CLOTHING TO BE CONSIDERED FOR THIS MATERIAL INCLUDE:
IF PROLONGED OR REPEATED CONTACT IS LIKELY, CHEMICAL, AND OIL RESISTANT
CLOTHING IS RECOMMENDED.
SPECIFIC HYGIENE MEASURES:
ALWAYS OBSERVE GOOD PERSONAL HYGIENE MEASURES, SUCH AS WASHING AFTER
HANDLING THE MATERIAL AND BEFORE EATING, DRINKING, AND/OR SMOKING.
ROUTINELY WASH WORK CLOTHING AND PROTECTIVE EQUIPMENT TO REMOVE
CONTAMINANTS. DISCARD CONTAMINATED CLOTHING AND FOOTWEAR THAT CANNOT BE
CLEANED. PRACTISE GOOD HOUSEKEEPING.
ENVIRONMENTAL CONTROLS:
COMPLY WITH APPLICABLE ENVIRONMENTAL REGULATIONS LIMITING DISCHARGE TO AIR,
WATER AND SOIL. PROTECT THE ENVIRONMENT BY APPLYING APPROPRIATE CONTROL
MEASURES TO PREVENT OR LIMIT EMISSIONS.
| SECTION 9 PHYSICAL AND CHEMICAL PROPERTIES | |
NOTE:
PHYSICAL AND CHEMICAL PROPERTIES ARE PROVIDED FOR SAFETY, HEALTH AND
ENVIRONMENTAL CONSIDERATIONS ONLY AND MAY NOT FULLY REPRESENT PRODUCT
SPECIFICATIONS. CONTACT THE SUPPLIER FOR ADDITIONAL INFORMATION.
GENERAL INFORMATION:
PHYSICAL STATE: LIQUID
COLOUR: AMBER
ODOUR: CHARACTERISTIC
ODOUR THRESHOLD: N/D
IMPORTANT HEALTH, SAFETY, AND ENVIRONMENTAL INFORMATION:
RELATIVE DENSITY (AT 15 DEG. C): 0.802
FLAMMABILITY (SOLID, GAS): N/A
FLASH POINT [METHOD]: >76 DEG. C (169 DEG. F) [ASTM D-92]
FLAMMABLE LIMITS (APPROXIMATE VOLUME % IN AIR):
LEL: N/D
UEL: N/D
AUTOIGNITION TEMPERATURE: N/D
BOILING POINT / RANGE: N/D
DECOMPOSITION TEMPERATURE: N/D
VAPOUR DENSITY (AIR = 1): >1 AT 101 KPA
VAPOUR PRESSURE: <0.133 KPA (1 MMHg) AT 20 DEG. C
EVAPORATION RATE (N-BUTYL ACETATE = 1): N/D
PH: N/A
LOG POW (N-OCTANOL/WATER PARTITION COEFFICIENT): N/D
SOLUBILITY IN WATER: NEGLIGIBLE
VISCOSITY:
2 CST (2 MM2/SEC) AT 40 DEG. C
0.9 CST (0.9 MM2/SEC) AT 100 DEG. C
OXIDIZING PROPERTIES: SEE HAZARDS IDENTIFICATION SECTION.
OTHER INFORMATION:
FREEZING POINT: N/D
MELTING POINT: N/A
POUR POINT: -33 DEG. C (-27 DEG. F)
| SECTION 10 STABILITY AND REACTIVITY | |
STABILITY: MATERIAL IS STABLE UNDER NORMAL CONDITIONS.
CONDITIONS TO AVOID: OPEN FLAMES AND HIGH ENERGY IGNITION SOURCES.
INCOMPATIBLE MATERIALS: STRONG OXIDISERS
HAZARDOUS DECOMPOSITION PRODUCTS:
MATERIAL DOES NOT DECOMPOSE AT AMBIENT TEMPERATURES.
POSSIBILITY OF HAZARDOUS REACTIONS:
HAZARDOUS POLYMERIZATION WILL NOT OCCUR.
| SECTION 11 TOXICOLOGICAL INFORMATION | |
INFORMATION ON TOXICOLOGICAL EFFECTS:
HAZARD CLASS CONCLUSION / REMARKS
INHALATION:
ACUTE TOXICITY: MINIMALLY TOXIC. BASED ON TEST DATA FOR
(RAT) LC50: >5000 MG/M3 STRUCTURALLY SIMILAR MATERIALS. TEST(S)
EQUIVALENT OR SIMILAR TO OECD GUIDELINE
403
IRRITATION: ELEVATED TEMPERATURES OR MECHANICAL
NO END POINT DATA FOR MATERIAL. ACTION MAY FORM VAPOURS, MIST, OR FUMES
WHICH MAY BE IRRITATING TO THE EYES,
NOSE, THROAT, OR LUNGS. BASED ON
ASSESSMENT OF THE COMPONENTS.
INGESTION:
ACUTE TOXICITY (RAT): MINIMALLY TOXIC. BASED ON TEST DATA FOR
LD50: >5000 MG/KG STRUCTURALLY SIMILAR MATERIALS. TEST(S)
EQUIVALENT OR SIMILAR TO OECD GUIDELINE
401
SKIN:
ACUTE TOXICITY (RABBIT): MINIMALLY TOXIC. BASED ON TEST DATA FOR
LD50: >5000 MG/KG STRUCTURALLY SIMILAR MATERIALS. TEST(S)
EQUIVALENT OR SIMILAR TO OECD GUIDELINE
402
SKIN CORROSION/IRRITATION NEGLIGIBLE IRRITATION TO SKIN AT
(RABBIT): DATA AVAILABLE. AMBIENT TEMPERATURES. BASED ON TEST
DATA FOR STRUCTURALLY SIMILAR
MATERIALS. TEST(S) EQUIVALENT OR
SIMILAR TO OECD GUIDELINE 404
EYE:
SERIOUS EYE DAMAGE/IRRITATION MAY CAUSE MILD, SHORT-LASTING
(RABBIT): DATA AVAILABLE. DISCOMFORT TO EYES. BASED ON TEST DATA
FOR STRUCTURALLY SIMILAR MATERIALS.
TEST(S) EQUIVALENT OR SIMILAR TO OECD
GUIDELINE 405
SENSITISATION:
RESPIRATORY SENSITIZATION: NOT EXPECTED TO BE A RESPIRATORY
NO END POINT DATA FOR MATERIAL. SENSITIZER.
SKIN SENSITIZATION: NOT EXPECTED TO BE A SKIN SENSITIZER.
NO END POINT DATA FOR MATERIAL. BASED ON ASSESSMENT OF THE COMPONENTS.
ASPIRATION: DATA AVAILABLE. MAY BE FATAL IF SWALLOWED AND ENTERS
AIRWAYS. BASED ON PHYSICO-CHEMICAL
PROPERTIES OF THE MATERIAL.
GERM CELL MUTAGENICITY: NOT EXPECTED TO BE A GERM CELL MUTAGEN.
NO END POINT DATA FOR MATERIAL. BASED ON ASSESSMENT OF THE COMPONENTS.
CARCINOGENICITY: NOT EXPECTED TO CAUSE CANCER. BASED ON
NO END POINT DATA FOR MATERIAL. ASSESSMENT OF THE COMPONENTS.
REPRODUCTIVE TOXICITY: NOT EXPECTED TO BE A REPRODUCTIVE
NO END POINT DATA FOR MATERIAL. TOXICANT. BASED ON ASSESSMENT OF THE
COMPONENTS.
LACTATION: NOT EXPECTED TO CAUSE HARM TO
NO END POINT DATA FOR MATERIAL. BREAST-FED CHILDREN.
SPECIFIC TARGET ORGAN TOXICITY (STOT):
SINGLE EXPOSURE: NOT EXPECTED TO CAUSE ORGAN DAMAGE
NO END POINT DATA FOR MATERIAL. FROM A SINGLE EXPOSURE.
REPEATED EXPOSURE: NOT EXPECTED TO CAUSE ORGAN DAMAGE FROM
NO END POINT DATA FOR MATERIAL. PROLONGED OR REPEATED EXPOSURE. BASED
ON ASSESSMENT OF THE COMPONENTS.
OTHER INFORMATION:
FOR THE PRODUCT ITSELF:
VAPOUR/AEROSOL CONCENTRATIONS ABOVE RECOMMENDED EXPOSURE LEVELS ARE
IRRITATING TO THE EYES AND RESPIRATORY TRACT, MAY CAUSE HEADACHES,
DIZZINESS, ANAESTHESIA, DROWSINESS, UNCONSCIOUSNESS AND OTHER CENTRAL
NERVOUS SYSTEM EFFECTS INCLUDING DEATH. PROLONGED AND/OR REPEATED SKIN
CONTACT WITH LOW VISCOSITY MATERIALS MAY DEFAT THE SKIN RESULTING IN
POSSIBLE IRRITATION AND DERMATITIS. SMALL AMOUNTS OF LIQUID ASPIRATED INTO
THE LUNGS DURING INGESTION OR FROM VOMITING MAY CAUSE CHEMICAL PNEUMONITIS
OR PULMONARY EDEMA.
IARC CLASSIFICATION:
THE FOLLOWING INGREDIENTS ARE CITED ON THE LISTS BELOW: NONE.
REGULATORY LISTS SEARCHED:
1 = IARC 1
2 = IARC 2A
3 = IARC 2B
| SECTION 12 ECOLOGICAL INFORMATION | |
THE INFORMATION GIVEN IS BASED ON DATA AVAILABLE FOR THE MATERIAL, THE
COMPONENTS OF THE MATERIAL, AND SIMILAR MATERIALS.
ECOTOXICITY:
MATERIAL: NOT EXPECTED TO BE HARMFUL TO AQUATIC ORGANISMS.
MOBILITY:
MORE VOLATILE COMPONENT:
HIGHLY VOLATILE, WILL PARTITION RAPIDLY TO AIR. NOT EXPECTED TO PARTITION
TO SEDIMENT AND WASTEWATER SOLIDS.
HIGH MOLECULAR WT. COMPONENT:
LOW SOLUBILITY AND FLOATS AND IS EXPECTED TO MIGRATE FROM WATER TO THE
LAND. EXPECTED TO PARTITION TO SEDIMENT AND WASTEWATER SOLIDS.
PERSISTENCE AND DEGRADABILITY:
BIODEGRADATION:
HYDROCARBON COMPONENT: EXPECTED TO BE READILY BIODEGRADABLE.
ATMOSPHERIC OXIDATION:
MORE VOLATILE COMPONENT: EXPECTED TO DEGRADE RAPIDLY IN AIR
BIOACCUMULATION POTENTIAL:
HYDROCARBON COMPONENT:
HAS THE POTENTIAL TO BIOACCUMULATE, HOWEVER METABOLISM OR PHYSICAL
PROPERTIES MAY REDUCE THE BIOCONCENTRATION OR LIMIT BIOAVAILABILITY.
OTHER ECOLOGICAL INFORMATION:
VOC: 49 %WT
| SECTION 13 DISPOSAL CONSIDERATIONS | |
DISPOSAL RECOMMENDATIONS BASED ON MATERIAL AS SUPPLIED. DISPOSAL MUST BE
IN ACCORDANCE WITH CURRENT APPLICABLE LAWS AND REGULATIONS, AND MATERIAL
CHARACTERISTICS AT TIME OF DISPOSAL.
DISPOSAL RECOMMENDATIONS:
PRODUCT IS SUITABLE FOR BURNING IN AN ENCLOSED CONTROLLED BURNER FOR FUEL
VALUE OR DISPOSAL BY SUPERVISED INCINERATION AT VERY HIGH TEMPERATURES TO
PREVENT FORMATION OF UNDESIRABLE COMBUSTION PRODUCTS. PROTECT THE
ENVIRONMENT. DISPOSE OF USED OIL AT DESIGNATED SITES. MINIMIZE SKIN
CONTACT. DO NOT MIX USED OILS WITH SOLVENTS, BRAKE FLUIDS OR COOLANTS.
EMPTY CONTAINER WARNING:
EMPTY CONTAINER WARNING (WHERE APPLICABLE):
EMPTY CONTAINERS MAY CONTAIN RESIDUE AND CAN BE DANGEROUS. DO NOT ATTEMPT
TO REFILL OR CLEAN CONTAINERS WITHOUT PROPER INSTRUCTIONS. EMPTY DRUMS
SHOULD BE COMPLETELY DRAINED AND SAFELY STORED UNTIL APPROPRIATELY
RECONDITIONED OR DISPOSED. EMPTY CONTAINERS SHOULD BE TAKEN FOR RECYCLING,
RECOVERY, OR DISPOSAL THROUGH SUITABLY QUALIFIED OR LICENSED CONTRACTOR AND
IN ACCORDANCE WITH GOVERNMENTAL REGULATIONS. DO NOT PRESSURISE, CUT, WELD,
BRAZE, SOLDER, DRILL, GRIND, OR EXPOSE SUCH CONTAINERS TO HEAT, FLAME,
SPARKS, STATIC ELECTRICITY, OR OTHER SOURCES OF IGNITION. THEY MAY EXPLODE
AND CAUSE INJURY OR DEATH.
| SECTION 14 TRANSPORT INFORMATION | |
LAND (ADG): NOT REGULATED FOR LAND TRANSPORT
SEA (IMDG): NOT REGULATED FOR SEA TRANSPORT ACCORDING TO IMDG-CODE
MARINE POLLUTANT: NO
AIR (IATA): NOT REGULATED FOR AIR TRANSPORT
| SECTION 15 REGULATORY INFORMATION | |
THIS MATERIAL IS CONSIDERED HAZARDOUS ACCORDING TO AUSTRALIA MODEL WORK
HEALTH AND SAFETY REGULATIONS.
PRODUCT IS NOT REGULATED ACCORDING TO AUSTRALIAN DANGEROUS GOODS CODE.
NO POISON SCHEDULE NUMBER ALLOCATED BY THE STANDARD FOR THE UNIFORM
SCHEDULING OF MEDICINES AND POISONS (SUSMP) ESTABLISHED UNDER THE
THERAPEUTIC GOODS ACT.
AS1940 COMBUSTIBLE CLASS: C1
REGULATORY STATUS AND APPLICABLE LAWS AND REGULATIONS:
LISTED OR EXEMPT FROM LISTING/NOTIFICATION ON THE FOLLOWING CHEMICAL
INVENTORIES: AICS, DSL, ENCS, IECSC, KECI, PICCS, TCSI, TSCA
| SECTION 16 OTHER INFORMATION | |
KEY TO ABBREVIATIONS AND ACRONYMS:
N/D = NOT DETERMINED
N/A = NOT APPLICABLE
STEL = SHORT-TERM EXPOSURE LIMIT
TWA = TIME-WEIGHTED AVERAGE
KEY TO THE H-CODES CONTAINED IN SECTION 3 OF THIS DOCUMENT (FOR INFORMATION
ONLY):
H227: COMBUSTIBLE LIQUID; FLAMMABLE LIQUID, CAT 4
H304: MAY BE FATAL IF SWALLOWED AND ENTERS AIRWAYS; ASPIRATION, CAT 1
H315: CAUSES SKIN IRRITATION; SKIN CORR/IRRITATION, CAT 2
H400: VERY TOXIC TO AQUATIC LIFE; ACUTE ENV TOX, CAT 1
H410:
VERY TOXIC TO AQUATIC LIFE WITH LONG LASTING EFFECTS; CHRONIC ENV TOX,
CAT 1
THIS SAFETY DATA SHEET CONTAINS THE FOLLOWING REVISIONS:
PERKAL PTY LTD TRADING AS ROTO OIL (SOUTH AUSTRALIA):
SECTION 01: SUPPLIER MAILING ADDRESS INFORMATION WAS DELETED.
PERKAL PTY LTD TRADING AS STATEWIDE OIL (SOUTH AUSTRALIA):
SECTION 01: SUPPLIER MAILING ADDRESS INFORMATION WAS ADDED.
PERKAL PTY LTD TRADING AS STATEWIDE OIL (WESTERN AUSTRALIA):
SECTION 01: SUPPLIER MAILING ADDRESS INFORMATION WAS MODIFIED.
SOUTHERN CROSS LUBES (VICTORIA AND TASMANIA):
SECTION 01: SUPPLIER MAILING ADDRESS INFORMATION WAS MODIFIED.
SECTION 01: COMPANY CONTACT METHODS INFORMATION WAS MODIFIED.
SECTION 02: GHS CONTAINS FOR LABEL_GHS CODES INFORMATION WAS MODIFIED.
SECTION 08: EXPOSURE LIMITS TABLE INFORMATION WAS MODIFIED.
THE INFORMATION AND RECOMMENDATIONS CONTAINED HEREIN ARE, TO THE BEST OF
EXXONMOBIL'S KNOWLEDGE AND BELIEF, ACCURATE AND RELIABLE AS OF THE DATE
ISSUED. YOU CAN CONTACT EXXONMOBIL TO INSURE THAT THIS DOCUMENT IS THE MOST
CURRENT AVAILABLE FROM EXXONMOBIL. THE INFORMATION AND RECOMMENDATIONS ARE
OFFERED FOR THE USER'S CONSIDERATION AND EXAMINATION. IT IS THE USER'S
RESPONSIBILITY TO SATISFY ITSELF THAT THE PRODUCT IS SUITABLE FOR THE
INTENDED USE. IF BUYER REPACKAGES THIS PRODUCT, IT IS THE USER'S
RESPONSIBILITY TO INSURE PROPER HEALTH, SAFETY AND OTHER NECESSARY
INFORMATION IS INCLUDED WITH AND/OR ON THE CONTAINER. APPROPRIATE WARNINGS
AND SAFE-HANDLING PROCEDURES SHOULD BE PROVIDED TO HANDLERS AND USERS.
ALTERATION OF THIS DOCUMENT IS STRICTLY PROHIBITED. EXCEPT TO THE EXTENT
REQUIRED BY LAW, RE-PUBLICATION OR RETRANSMISSION OF THIS DOCUMENT, IN
WHOLE OR IN PART, IS NOT PERMITTED. THE TERM, "EXXONMOBIL" IS USED FOR
CONVENIENCE, AND MAY INCLUDE ANY ONE OR MORE OF EXXONMOBIL CHEMICAL
COMPANY, EXXON MOBIL CORPORATION, OR ANY AFFILIATES IN WHICH THEY DIRECTLY
OF INDIRECTLY HOLD ANY INTEREST.
DGN: 7074661DAU (1011529)
PREPARED BY:
EXXON MOBIL CORPORATION
EMBSI, CLINTON NJ
USA
CONTACT POINT: SEE SECTION 1 FOR LOCAL CONTACT NUMBER