| Common Name: | 5380 SERIES 5KV AND 8KV MOTOR LEAD REUSABLE SPLICE KITS |
| Manufacturer: | 3M |
| SDS Revision Date: | 1/7/2016 |
| SDS Format: | GHS-US |
| Item Number(s): | 5ZNN8, 5ZNN9, 5ZNP0, 5ZNP1 |
| Manufacturer Model Number(s): |
SDS Table of Contents
Click the desired link below to jump directly to that section in the SDS.
5380 SERIES 5KV AND 8KV MOTOR LEAD REUSABLE SPLICE KITS
01/07/16
3M
SAFETY DATA SHEET
COPYRIGHT, 2016, 3M COMPANY.
ALL RIGHTS RESERVED. COPYING AND/OR DOWNLOADING OF THIS INFORMATION FOR THE
PURPOSE OF PROPERLY UTILIZING 3M PRODUCTS IS ALLOWED PROVIDED THAT:
(1) THE INFORMATION IS COPIED IN FULL WITH NO CHANGES UNLESS PRIOR WRITTEN
AGREEMENT IS OBTAINED FROM 3M, AND
(2) NEITHER THE COPY NOR THE ORIGINAL IS RESOLD OR OTHERWISE DISTRIBUTED
WITH THE INTENTION OF EARNING A PROFIT THEREON.
DOCUMENT GROUP: 26-7936-3
VERSION NUMBER: 5.00
ISSUE DATE: 01/07/16
SUPERCEDES DATE: 05/28/15
PRODUCT IDENTIFIER: 5380 SERIES 5KV AND 8KV MOTOR LEAD REUSABLE SPLICE KITS
RECOMMENDED USE: ELECTRICAL
SUPPLIER'S DETAILS:
MANUFACTURER: 3M
DIVISION: ELECTRICAL MARKETS DIVISION
ADDRESS:
3M CENTER
ST. PAUL, MN 55144-1000
USA
TELEPHONE: 1-888-3M HELPS (1-888-364-3577)
EMERGENCY TELEPHONE NUMBER:
1-800-364-3577 OR (651) 737-6501 (24 HOURS)
THIS PRODUCT IS A KIT OR A MULTIPART PRODUCT WHICH CONSISTS OF MULTIPLE,
INDEPENDENTLY PACKAGED COMPONENTS. A SAFETY DATA SHEET (SDS), ARTICLE
INFORMATION SHEET (AIS), OR ARTICLE INFORMATION LETTER (AIL) FOR EACH OF
THESE COMPONENTS IS INCLUDED. PLEASE DO NOT SEPARATE THE COMPONENT
DOCUMENTS FROM THIS COVER SHEET.
THE DOCUMENT NUMBERS FOR COMPONENTS OF THIS PRODUCT ARE:
10-2656-6, 11-4628-1, 34-7684-3
DISCLAIMER:
THE INFORMATION IN THIS SAFETY DATA SHEET (SDS) IS BELIEVED TO BE CORRECT
AS OF THE DATE ISSUED. 3M MAKES NO WARRANTIES, EXPRESSED OR IMPLIED,
INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE OR COURSE OF PERFORMANCE OR USAGE OF
TRADE. USER IS RESPONSIBLE FOR DETERMINING WHETHER THE 3M PRODUCT IS FIT
FOR A PARTICULAR PURPOSE AND SUITABLE FOR USER'S METHOD OF USE OR
APPLICATION. GIVEN THE VARIETY OF FACTORS THAT CAN AFFECT THE USE AND
APPLICATION OF A 3M PRODUCT, SOME OF WHICH ARE UNIQUELY WITHIN THE USER'S
KNOWLEDGE AND CONTROL, IT IS ESSENTIAL THAT THE USER EVALUATE THE 3M
PRODUCT TO DETERMINE WHETHER IT IS FIT FOR A PARTICULAR PURPOSE AND
SUITABLE FOR USER'S METHOD OF USE OR APPLICATION.
3M PROVIDES INFORMATION IN ELECTRONIC FORM AS A SERVICE TO ITS CUSTOMERS.
DUE TO THE REMOTE POSSIBILITY THAT ELECTRONIC TRANSFER MAY HAVE RESULTED IN
ERRORS, OMISSIONS OR ALTERATIONS IN THIS INFORMATION, 3M MAKES NO
REPRESENTATIONS AS TO ITS COMPLETENESS OR ACCURACY. IN ADDITION,
INFORMATION OBTAINED FROM A DATABASE MAY NOT BE AS CURRENT AS THE
INFORMATION IN THE SDS AVAILABLE DIRECTLY FROM 3M
3M USA SDSS ARE AVAILABLE AT WWW.3M.COM
SILICONE LUBRICANT
03/19/14
3M
SAFETY DATA SHEET
COPYRIGHT, 2014, 3M COMPANY.
ALL RIGHTS RESERVED. COPYING AND/OR DOWNLOADING OF THIS INFORMATION FOR THE
PURPOSE OF PROPERLY UTILIZING 3M PRODUCTS IS ALLOWED PROVIDED THAT:
(1) THE INFORMATION IS COPIED IN FULL WITH NO CHANGES UNLESS PRIOR WRITTEN
AGREEMENT IS OBTAINED FROM 3M, AND
(2) NEITHER THE COPY NOR THE ORIGINAL IS RESOLD OR OTHERWISE DISTRIBUTED
WITH THE INTENTION OF EARNING A PROFIT THEREON.
DOCUMENT GROUP: 10-2656-6
VERSION NUMBER: 24.00
ISSUE DATE: 03/19/14
SUPERCEDES DATE: 08/01/12
| SECTION 1: IDENTIFICATION |  |
1.1. PRODUCT IDENTIFIER: SILICONE LUBRICANT
PRODUCT IDENTIFICATION NUMBERS: 80-6108-3463-4, 80-6109-3893-0
1.2. RECOMMENDED USE AND RESTRICTIONS ON USE:
RECOMMENDED USE: SILICONE LUBRICANT GREASE FOR ELECTRICAL SPLICES
1.3. SUPPLIER'S DETAILS:
MANUFACTURER: 3M
DIVISION: ELECTRICAL MARKETS DIVISION
ADDRESS:
3M CENTER
ST. PAUL, MN 55144-1000
USA
TELEPHONE: 1-888-3M HELPS (1-888-364-3577)
1.4. EMERGENCY TELEPHONE NUMBER:
1-800-364-3577 OR (651) 737-6501 (24 HOURS)
| SECTION 2: HAZARD IDENTIFICATION | |
2.1. HAZARD CLASSIFICATION:
NOT CLASSIFIED AS HAZARDOUS ACCORDING TO OSHA HAZARD COMMUNICATION
STANDARD, 29 CFR 1910.1200.
2.2. LABEL ELEMENTS:
SIGNAL WORD: NOT APPLICABLE.
SYMBOLS: NOT APPLICABLE.
PICTOGRAMS: NOT APPLICABLE.
PRECAUTIONARY STATEMENTS:
DISPOSAL:
DISPOSE OF CONTENTS/CONTAINER IN ACCORDANCE WITH APPLICABLE
LOCAL/REGIONAL/NATIONAL/INTERNATIONAL REGULATIONS.
2.3. HAZARDS NOT OTHERWISE CLASSIFIED: NONE.
| SECTION 3: COMPOSITION/INFORMATION ON INGREDIENTS | |
INGREDIENT C.A.S. NO. % BY WT
SILICONE GREASE 63148-62-9 75 - 95
SYNTHETIC AMORPHOUS SILICA, FUMED, 112945-52-5 5 - 25
CRYSTALLINE FREE
| SECTION 4: FIRST AID MEASURES | |
4.1. DESCRIPTION OF FIRST AID MEASURES:
INHALATION:
REMOVE PERSON TO FRESH AIR. IF YOU ARE CONCERNED, GET MEDICAL ADVICE.
SKIN CONTACT:
WASH WITH SOAP AND WATER. IF SIGNS/SYMPTOMS DEVELOP, GET MEDICAL ATTENTION.
EYE CONTACT:
FLUSH WITH LARGE AMOUNTS OF WATER. REMOVE CONTACT LENSES IF EASY TO DO.
CONTINUE RINSING. IF SIGNS/SYMPTOMS PERSIST, GET MEDICAL ATTENTION.
IF SWALLOWED: NO NEED FOR FIRST AID IS ANTICIPATED.
4.2. MOST IMPORTANT SYMPTOMS AND EFFECTS, BOTH ACUTE AND DELAYED:
SEE SECTION 11.1. INFORMATION ON TOXICOLOGICAL EFFECTS.
4.3. INDICATION OF ANY IMMEDIATE MEDICAL ATTENTION AND SPECIAL TREATMENT
REQUIRED: NOT APPLICABLE.
| SECTION 5: FIRE-FIGHTING MEASURES | |
5.1. SUITABLE EXTINGUISHING MEDIA:
IN CASE OF FIRE:
USE A FIRE FIGHTING AGENT SUITABLE FOR ORDINARY COMBUSTIBLE MATERIAL SUCH
AS WATER OR FOAM TO EXTINGUISH.
5.2. SPECIAL HAZARDS ARISING FROM THE SUBSTANCE OR MIXTURE:
NONE INHERENT IN THIS PRODUCT.
HAZARDOUS DECOMPOSITION OR BY-PRODUCTS:
SUBSTANCE CONDITION
FORMALDEHYDE DURING COMBUSTION
CARBON MONOXIDE DURING COMBUSTION
CARBON DIOXIDE DURING COMBUSTION
5.3. SPECIAL PROTECTIVE ACTIONS FOR FIRE-FIGHTERS:
NO UNUSUAL FIRE OR EXPLOSION HAZARDS ARE ANTICIPATED.
| SECTION 6: ACCIDENTAL RELEASE MEASURES | |
6.1. PERSONAL PRECAUTIONS, PROTECTIVE EQUIPMENT AND EMERGENCY PROCEDURES:
EVACUATE AREA. VENTILATE THE AREA WITH FRESH AIR. FOR LARGE SPILL, OR
SPILLS IN CONFINED SPACES, PROVIDE MECHANICAL VENTILATION TO DISPERSE OR
EXHAUST VAPORS, IN ACCORDANCE WITH GOOD INDUSTRIAL HYGIENE PRACTICE.
WARNING!
A MOTOR COULD BE AN IGNITION SOURCE AND COULD CAUSE FLAMMABLE GASES OR
VAPORS IN THE SPILL AREA TO BURN OR EXPLODE. REFER TO OTHER SECTIONS OF
THIS SDS FOR INFORMATION REGARDING PHYSICAL AND HEALTH HAZARDS, RESPIRATORY
PROTECTION, VENTILATION, AND PERSONAL PROTECTIVE EQUIPMENT.
6.2. ENVIRONMENTAL PRECAUTIONS: AVOID RELEASE TO THE ENVIRONMENT.
6.3. METHODS AND MATERIAL FOR CONTAINMENT AND CLEANING UP:
COLLECT AS MUCH OF THE SPILLED MATERIAL AS POSSIBLE. PLACE IN A CLOSED
CONTAINER APPROVED FOR TRANSPORTATION BY APPROPRIATE AUTHORITIES. CLEAN UP
RESIDUE. SEAL THE CONTAINER. DISPOSE OF COLLECTED MATERIAL AS SOON AS
POSSIBLE.
| SECTION 7: HANDLING AND STORAGE | |
7.1. PRECAUTIONS FOR SAFE HANDLING:
FOR INDUSTRIAL OR PROFESSIONAL USE ONLY. AVOID CONTACT WITH OXIDIZING
AGENTS (EG. CHLORINE, CHROMIC ACID ETC.)
7.2. CONDITIONS FOR SAFE STORAGE INCLUDING ANY INCOMPATIBILITIES:
STORE IN A WELL-VENTILATED PLACE. STORE AWAY FROM ACIDS. STORE AWAY FROM
STRONG BASES. STORE AWAY FROM OXIDIZING AGENTS.
| SECTION 8: EXPOSURE CONTROLS/PERSONAL PROTECTION | |
8.1. CONTROL PARAMETERS:
OCCUPATIONAL EXPOSURE LIMITS:
NO OCCUPATIONAL EXPOSURE LIMIT VALUES EXIST FOR ANY OF THE COMPONENTS
LISTED IN SECTION 3 OF THIS SDS.
8.2. EXPOSURE CONTROLS:
8.2.1. ENGINEERING CONTROLS:
USE GENERAL DILUTION VENTILATION AND/OR LOCAL EXHAUST VENTILATION TO
CONTROL AIRBORNE EXPOSURES TO BELOW RELEVANT EXPOSURE LIMITS AND/OR CONTROL
DUST/FUME/GAS/MIST/VAPORS/SPRAY. IF VENTILATION IS NOT ADEQUATE, USE
RESPIRATORY PROTECTION EQUIPMENT.
8.2.2. PERSONAL PROTECTIVE EQUIPMENT (PPE):
EYE/FACE PROTECTION: NONE REQUIRED.
SKIN/HAND PROTECTION: NO CHEMICAL PROTECTIVE GLOVES ARE REQUIRED.
RESPIRATORY PROTECTION:
UNDER NORMAL USE CONDITIONS, AIRBORNE EXPOSURES ARE NOT EXPECTED TO BE
SIGNIFICANT ENOUGH TO REQUIRE RESPIRATORY PROTECTION.
| SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES | |
9.1. INFORMATION ON BASIC PHYSICAL AND CHEMICAL PROPERTIES:
GENERAL PHYSICAL FORM: SOLID GREASE
SPECIFIC PHYSICAL FORM: GREASE
ODOR, COLOR, GRADE: LIGHT COLORED GREASE, NO ODOR
ODOR THRESHOLD: NO DATA AVAILABLE
PH: NOT APPLICABLE
MELTING POINT: NO DATA AVAILABLE
BOILING POINT: NOT APPLICABLE
FLASH POINT: NO FLASH POINT
EVAPORATION RATE: NOT APPLICABLE
FLAMMABILITY (SOLID, GAS): NOT CLASSIFIED
FLAMMABLE LIMITS(LEL): NO DATA AVAILABLE
FLAMMABLE LIMITS(UEL): NO DATA AVAILABLE
VAPOR PRESSURE: NOT APPLICABLE
VAPOR DENSITY: NOT APPLICABLE
DENSITY: NO DATA AVAILABLE
SPECIFIC GRAVITY: 1.02 - 1.6 [REF STD: WATER=1]
SOLUBILITY IN WATER: NIL
SOLUBILITY-NON-WATER: NO DATA AVAILABLE
PARTITION COEFFICIENT N-OCTANOL/WATER: NO DATA AVAILABLE
AUTOIGNITION TEMPERATURE: NO DATA AVAILABLE
DECOMPOSITION TEMPERATURE: NO DATA AVAILABLE
AVERAGE PARTICLE SIZE: NO DATA AVAILABLE
BULK DENSITY: NO DATA AVAILABLE
HAZARDOUS AIR POLLUTANTS: NO DATA AVAILABLE
MOLECULAR WEIGHT: NO DATA AVAILABLE
VOLATILE ORGANIC COMPOUNDS: NO DATA AVAILABLE
PERCENT VOLATILE: NO DATA AVAILABLE
SOFTENING POINT: NO DATA AVAILABLE
VOC LESS H2O & EXEMPT SOLVENTS: NO DATA AVAILABLE
| SECTION 10: STABILITY AND REACTIVITY | |
10.1. REACTIVITY:
THIS MATERIAL MAY BE REACTIVE WITH CERTAIN AGENTS UNDER CERTAIN
CONDITIONS - SEE THE REMAINING HEADINGS IN THIS SECTION.
10.2. CHEMICAL STABILITY: STABLE.
10.3. POSSIBILITY OF HAZARDOUS REACTIONS:
HAZARDOUS POLYMERIZATION WILL NOT OCCUR.
10.4. CONDITIONS TO AVOID: NOT DETERMINED
10.5. INCOMPATIBLE MATERIALS:
STRONG OXIDIZING AGENTS
STRONG ACIDS
STRONG BASES
REDUCING AGENTS
NO DATA AVAILABLE
10.6. HAZARDOUS DECOMPOSITION PRODUCTS:
SUBSTANCE CONDITION
NONE KNOWN.
REFER TO SECTION 5.2 FOR HAZARDOUS DECOMPOSITION PRODUCTS DURING
COMBUSTION.
| SECTION 11: TOXICOLOGICAL INFORMATION | |
THE INFORMATION BELOW MAY NOT BE CONSISTENT WITH THE MATERIAL
CLASSIFICATION IN SECTION 2 IF SPECIFIC INGREDIENT CLASSIFICATIONS ARE
MANDATED BY A COMPETENT AUTHORITY. IN ADDITION, TOXICOLOGICAL DATA ON
INGREDIENTS MAY NOT BE REFLECTED IN THE MATERIAL CLASSIFICATION AND/OR THE
SIGNS AND SYMPTOMS OF EXPOSURE, BECAUSE AN INGREDIENT MAY BE PRESENT BELOW
THE THRESHOLD FOR LABELING, AN INGREDIENT MAY NOT BE AVAILABLE FOR
EXPOSURE, OR THE DATA MAY NOT BE RELEVANT TO THE MATERIAL AS A WHOLE.
11.1. INFORMATION ON TOXICOLOGICAL EFFECTS:
SIGNS AND SYMPTOMS OF EXPOSURE:
BASED ON TEST DATA AND/OR INFORMATION ON THE COMPONENTS, THIS MATERIAL MAY
PRODUCE THE FOLLOWING HEALTH EFFECTS:
INHALATION: NO HEALTH EFFECTS ARE EXPECTED.
SKIN CONTACT:
CONTACT WITH THE SKIN DURING PRODUCT USE IS NOT EXPECTED TO RESULT IN
SIGNIFICANT IRRITATION.
EYE CONTACT:
CONTACT WITH THE EYES DURING PRODUCT USE IS NOT EXPECTED TO RESULT IN
SIGNIFICANT IRRITATION.
INGESTION: NO HEALTH EFFECTS ARE EXPECTED.
TOXICOLOGICAL DATA:
IF A COMPONENT IS DISCLOSED IN SECTION 3 BUT DOES NOT APPEAR IN A TABLE
BELOW, EITHER NO DATA ARE AVAILABLE FOR THAT ENDPOINT OR THE DATA ARE NOT
SUFFICIENT FOR CLASSIFICATION.
ACUTE TOXICITY:
NAME ROUTE SPECIES VALUE
OVERALL PRODUCT INGESTION NO DATA AVAILABLE;
CALCULATED ATE: >5,000 MG/KG
SILICONE GREASE DERMAL RABBIT LD50: >19,400 MG/KG
SILICONE GREASE INGESTION RAT LD50: >17,000 MG/KG
SYNTHETIC DERMAL RABBIT LD50: >5,000 MG/KG
AMORPHOUS SILICA,
FUMED,
CRYSTALLINE FREE
SYNTHETIC INHALATION- RAT LC50: >0.691 MG/L
AMORPHOUS SILICA, DUST/MIST
FUMED, (4 HOURS)
CRYSTALLINE FREE
SYNTHETIC INGESTION RAT LD50: >5,110 MG/KG
AMORPHOUS
SILICA, FUMED,
CRYSTALLINE FREE
ATE = ACUTE TOXICITY ESTIMATE
SKIN CORROSION/IRRITATION:
NAME SPECIES VALUE
SILICONE GREASE RABBIT NO SIGNIFICANT IRRITATION
SYNTHETIC AMORPHOUS RABBIT NO SIGNIFICANT IRRITATION
SILICA, FUMED,
CRYSTALLINE FREE
SERIOUS EYE DAMAGE/IRRITATION:
NAME SPECIES VALUE
SILICONE GREASE RABBIT NO SIGNIFICANT IRRITATION
SYNTHETIC AMORPHOUS RABBIT NO SIGNIFICANT IRRITATION
SILICA, FUMED,
CRYSTALLINE FREE
SKIN SENSITIZATION:
NAME SPECIES VALUE
SYNTHETIC AMORPHOUS HUMAN NOT SENSITIZING
SILICA, FUMED, AND ANIMAL
CRYSTALLINE FREE
RESPIRATORY SENSITIZATION:
NAME SPECIES VALUE
GERM CELL MUTAGENICITY:
NAME ROUTE VALUE
SYNTHETIC AMORPHOUS IN VITRO NOT MUTAGENIC
SILICA, FUMED,
CRYSTALLINE FREE
CARCINOGENICITY:
NAME ROUTE SPECIES VALUE
SYNTHETIC AMORPHOUS NOT MOUSE SOME POSITIVE DATA EXIST,
SILICA, FUMED, SPECIFIED BUT THE DATA ARE NOT
CRYSTALLINE FREE SUFFICIENT FOR CLASSIFICATION
REPRODUCTIVE TOXICITY:
REPRODUCTIVE AND/OR DEVELOPMENTAL EFFECTS:
NAME ROUTE VALUE
SYNTHETIC AMORPHOUS INGESTION NOT TOXIC TO FEMALE REPRODUCTION
SILICA, FUMED,
CRYSTALLINE FREE
SYNTHETIC AMORPHOUS INGESTION NOT TOXIC TO MALE REPRODUCTION
SILICA, FUMED,
CRYSTALLINE FREE
SYNTHETIC AMORPHOUS INGESTION NOT TOXIC TO DEVELOPMENT
SILICA, FUMED,
CRYSTALLINE FREE
NAME SPECIES TEST RESULT EXPOSURE DURATION
SYNTHETIC AMORPHOUS RAT NOAEL: 509 MG/KG/DAY 1 GENERATION
SILICA, FUMED,
CRYSTALLINE FREE
SYNTHETIC AMORPHOUS RAT NOAEL: 497 MG/KG/DAY 1 GENERATION
SILICA, FUMED,
CRYSTALLINE FREE
SYNTHETIC AMORPHOUS RAT NOAEL: 1,350 MG/KG/DAY DURING
SILICA, FUMED, ORGANOGENESIS
CRYSTALLINE FREE
TARGET ORGAN(S):
SPECIFIC TARGET ORGAN TOXICITY - SINGLE EXPOSURE:
NAME ROUTE TARGET ORGAN(S) VALUE SPECIES TEST RESULT EXPOSURE
DURATION
SPECIFIC TARGET ORGAN TOXICITY - REPEATED EXPOSURE:
NAME ROUTE TARGET ORGAN(S) VALUE
SYNTHETIC INHALATION RESPIRATORY SYSTEM ALL DATA ARE NEGATIVE
AMORPHOUS SILICA, SILICOSIS
FUMED,
CRYSTALLINE FREE
NAME SPECIES TEST RESULT EXPOSURE DURATION
SYNTHETIC HUMAN NOAEL: OCCUPATIONAL EXPOSURE
AMORPHOUS SILICA, NOT AVAILABLE
FUMED,
CRYSTALLINE FREE
ASPIRATION HAZARD:
NAME VALUE
PLEASE CONTACT THE ADDRESS OR PHONE NUMBER LISTED IN SECTION 1 OF THIS
SDS FOR ADDITIONAL TOXICOLOGICAL INFORMATION ON THIS MATERIAL AND/OR
ITS COMPONENTS.
| SECTION 12: ECOLOGICAL INFORMATION | |
ECOTOXICOLOGICAL INFORMATION:
PLEASE CONTACT THE ADDRESS OR PHONE NUMBER LISTED IN SECTION 1 OF THIS
SDS FOR ADDITIONAL ECOTOXICOLOGICAL INFORMATION ON THIS MATERIAL AND/OR
ITS COMPONENTS.
CHEMICAL FATE INFORMATION:
PLEASE CONTACT THE ADDRESS OR PHONE NUMBER LISTED IN SECTION 1 OF THIS
SDS FOR ADDITIONAL CHEMICAL FATE INFORMATION ON THIS MATERIAL AND/OR
ITS COMPONENTS.
| SECTION 13: DISPOSAL CONSIDERATIONS | |
13.1. DISPOSAL METHODS:
DISPOSE OF CONTENTS/CONTAINER IN ACCORDANCE WITH THE
LOCAL/REGIONAL/NATIONAL/INTERNATIONAL REGULATIONS.
DISPOSE OF WASTE PRODUCT IN A PERMITTED INDUSTRIAL WASTE FACILITY. AS A
DISPOSAL ALTERNATIVE, INCINERATE IN A PERMITTED WASTE INCINERATION
FACILITY. PROPER DESTRUCTION MAY REQUIRE THE USE OF ADDITIONAL FUEL DURING
INCINERATION PROCESSES. IF NO OTHER DISPOSAL OPTIONS ARE AVAILABLE, WASTE
PRODUCT MAY BE PLACED IN A LANDFILL PROPERLY DESIGNED FOR INDUSTRIAL WASTE.
EPA HAZARDOUS WASTE NUMBER (RCRA): NOT REGULATED
| SECTION 14: TRANSPORT INFORMATION | |
FOR TRANSPORT INFORMATION, PLEASE VISIT:
HTTP://3M.COM/TRANSPORTINFO OR CALL 1-800-364-3577 OR 651-737-6501.
| SECTION 15: REGULATORY INFORMATION | |
15.1. US FEDERAL REGULATIONS: CONTACT 3M FOR MORE INFORMATION.
311/312 HAZARD CATEGORIES:
FIRE HAZARD: NO
PRESSURE HAZARD: NO
REACTIVITY HAZARD: NO
IMMEDIATE HAZARD: NO
DELAYED HAZARD: NO
15.2. STATE REGULATIONS: CONTACT 3M FOR MORE INFORMATION.
15.3. CHEMICAL INVENTORIES:
THE COMPONENTS OF THIS MATERIAL ARE IN COMPLIANCE WITH THE PROVISIONS OF
AUSTRALIA NATIONAL INDUSTRIAL CHEMICAL NOTIFICATION AND ASSESSMENT SCHEME
(NICNAS). CERTAIN RESTRICTIONS MAY APPLY. CONTACT THE SELLING DIVISION FOR
ADDITIONAL INFORMATION.
THE COMPONENTS OF THIS PRODUCT ARE IN COMPLIANCE WITH THE NEW SUBSTANCE
NOTIFICATION REQUIREMENTS OF CEPA.
THE COMPONENTS OF THIS PRODUCT ARE IN COMPLIANCE WITH THE CHEMICAL
NOTIFICATION REQUIREMENTS OF TSCA.
CONTACT 3M FOR MORE INFORMATION.
15.4. INTERNATIONAL REGULATIONS: CONTACT 3M FOR MORE INFORMATION.
THIS SDS HAS BEEN PREPARED TO MEET THE U.S. OSHA HAZARD COMMUNICATION
STANDARD, 29 CFR 1910.1200.
| SECTION 16: OTHER INFORMATION | |
NFPA HAZARD CLASSIFICATION:
HEALTH 0
FLAMMABILITY 1
INSTABILITY 0
SPECIAL HAZARDS NONE
NATIONAL FIRE PROTECTION ASSOCIATION (NFPA) HAZARD RATINGS ARE DESIGNED FOR
USE BY EMERGENCY RESPONSE PERSONNEL TO ADDRESS THE HAZARDS THAT ARE
PRESENTED BY SHORT-TERM, ACUTE EXPOSURE TO A MATERIAL UNDER CONDITIONS OF
FIRE, SPILL, OR SIMILAR EMERGENCIES. HAZARD RATINGS ARE PRIMARILY BASED ON
THE INHERENT PHYSICAL AND TOXIC PROPERTIES OF THE MATERIAL BUT ALSO INCLUDE
THE TOXIC PROPERTIES OF COMBUSTION OR DECOMPOSITION PRODUCTS THAT ARE KNOWN
TO BE GENERATED IN SIGNIFICANT QUANTITIES.
HMIS HAZARD CLASSIFICATION:
HEALTH 0
FLAMMABILITY 1
PHYSICAL HAZARD 0
PERSONAL PROTECTION X - SEE PPE SECTION.
HAZARDOUS MATERIAL IDENTIFICATION SYSTEM (HMIS(R*) III) HAZARD RATINGS ARE
DESIGNED TO INFORM EMPLOYEES OF CHEMICAL HAZARDS IN THE WORKPLACE. THESE
RATINGS ARE BASED ON THE INHERENT PROPERTIES OF THE MATERIAL UNDER EXPECTED
CONDITIONS OF NORMAL USE AND ARE NOT INTENDED FOR USE IN EMERGENCY
SITUATIONS. HMIS(R*) III RATINGS ARE TO BE USED WITH A FULLY IMPLEMENTED
HMIS(R*) III PROGRAM. HMIS(R*) IS A REGISTERED MARK OF THE AMERICAN
COATINGS ASSOCIATION (ACA).
DOCUMENT GROUP: 10-2656-6
VERSION NUMBER: 24.00
ISSUE DATE: 03/19/14
SUPERCEDES DATE: 08/01/12
DISCLAIMER:
THE INFORMATION IN THIS SAFETY DATA SHEET (SDS) IS BELIEVED TO BE CORRECT
AS OF THE DATE ISSUED. 3M MAKES NO WARRANTIES, EXPRESSED OR IMPLIED,
INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE OR COURSE OF PERFORMANCE OR USAGE OF
TRADE. USER IS RESPONSIBLE FOR DETERMINING WHETHER THE 3M PRODUCT IS FIT
FOR A PARTICULAR PURPOSE AND SUITABLE FOR USER'S METHOD OF USE OR
APPLICATION. GIVEN THE VARIETY OF FACTORS THAT CAN AFFECT THE USE AND
APPLICATION OF A 3M PRODUCT, SOME OF WHICH ARE UNIQUELY WITHIN THE USER'S
KNOWLEDGE AND CONTROL, IT IS ESSENTIAL THAT THE USER EVALUATE THE 3M
PRODUCT TO DETERMINE WHETHER IT IS FIT FOR A PARTICULAR PURPOSE AND
SUITABLE FOR USER'S METHOD OF USE OR APPLICATION.
3M PROVIDES INFORMATION IN ELECTRONIC FORM AS A SERVICE TO ITS CUSTOMERS.
DUE TO THE REMOTE POSSIBILITY THAT ELECTRONIC TRANSFER MAY HAVE RESULTED IN
ERRORS, OMISSIONS OR ALTERATIONS IN THIS INFORMATION, 3M MAKES NO
REPRESENTATIONS AS TO ITS COMPLETENESS OR ACCURACY. IN ADDITION,
INFORMATION OBTAINED FROM A DATABASE MAY NOT BE AS CURRENT AS THE
INFORMATION IN THE SDS AVAILABLE DIRECTLY FROM 3M
3M USA SDSS ARE AVAILABLE AT WWW.3M.COM
3M(TM) CABLE PREPARATION KIT CC-3 (BAG)
04/24/15
3M
SAFETY DATA SHEET
COPYRIGHT, 2015, 3M COMPANY.
ALL RIGHTS RESERVED. COPYING AND/OR DOWNLOADING OF THIS INFORMATION FOR THE
PURPOSE OF PROPERLY UTILIZING 3M PRODUCTS IS ALLOWED PROVIDED THAT:
(1) THE INFORMATION IS COPIED IN FULL WITH NO CHANGES UNLESS PRIOR WRITTEN
AGREEMENT IS OBTAINED FROM 3M, AND
(2) NEITHER THE COPY NOR THE ORIGINAL IS RESOLD OR OTHERWISE DISTRIBUTED
WITH THE INTENTION OF EARNING A PROFIT THEREON.
DOCUMENT GROUP: 11-4628-1
VERSION NUMBER: 34.02
ISSUE DATE: 04/24/15
SUPERCEDES DATE: 10/20/14
| SECTION 1: IDENTIFICATION | |
1.1. PRODUCT IDENTIFIER: 3M(TM) CABLE PREPARATION KIT CC-3 (BAG)
PRODUCT IDENTIFICATION NUMBERS:
78-8018-9838-4, 80-6105-9300-8, 80-6116-0612-2
1.2. RECOMMENDED USE AND RESTRICTIONS ON USE:
RECOMMENDED USE: ELECTRICAL, SOLVENT SOAKED PADS FOR CLEANING CABLE.
1.3. SUPPLIER'S DETAILS:
MANUFACTURER: 3M
DIVISION: ELECTRICAL MARKETS DIVISION
ADDRESS:
3M CENTER
ST. PAUL, MN 55144-1000
USA
TELEPHONE: 1-888-3M HELPS (1-888-364-3577)
1.4. EMERGENCY TELEPHONE NUMBER:
1-800-364-3577 OR (651) 737-6501 (24 HOURS)
| SECTION 2: HAZARD IDENTIFICATION | |
2.1. HAZARD CLASSIFICATION:
FLAMMABLE LIQUID: CATEGORY 4.
SKIN CORROSION/IRRITATION: CATEGORY 2.
SKIN SENSITIZER: CATEGORY 1.
SPECIFIC TARGET ORGAN TOXICITY (CENTRAL NERVOUS SYSTEM): CATEGORY 3.
2.2. LABEL ELEMENTS:
SIGNAL WORD: WARNING
SYMBOLS: EXCLAMATION MARK
PICTOGRAMS: EXCLAMATION MARK
HAZARD STATEMENTS:
COMBUSTIBLE LIQUID.
CAUSES SKIN IRRITATION.
MAY CAUSE AN ALLERGIC SKIN REACTION.
MAY CAUSE DROWSINESS OR DIZZINESS.
PRECAUTIONARY STATEMENTS:
PREVENTION:
KEEP AWAY FROM HEAT/SPARKS/OPEN FLAMES/HOT SURFACES. - NO SMOKING.
AVOID BREATHING DUST/FUME/GAS/MIST/VAPORS/SPRAY.
USE ONLY OUTDOORS OR IN A WELL-VENTILATED AREA.
WEAR PROTECTIVE GLOVES.
WASH THOROUGHLY AFTER HANDLING.
CONTAMINATED WORK CLOTHING MUST NOT BE ALLOWED OUT OF THE WORKPLACE.
RESPONSE:
IF INHALED: REMOVE PERSON TO FRESH AIR AND KEEP COMFORTABLE FOR BREATHING.
IF ON SKIN: WASH WITH PLENTY OF SOAP AND WATER.
IF SKIN IRRITATION OR RASH OCCURS: GET MEDICAL ADVICE/ATTENTION.
TAKE OFF CONTAMINATED CLOTHING AND WASH IT BEFORE REUSE.
CALL A POISON CENTER OR DOCTOR/PHYSICIAN IF YOU FEEL UNWELL.
IN CASE OF FIRE:
USE A FIRE FIGHTING AGENT SUITABLE FOR FLAMMABLE LIQUIDS SUCH AS DRY
CHEMICAL OR CARBON DIOXIDE TO EXTINGUISH.
STORAGE:
STORE IN A WELL-VENTILATED PLACE. KEEP CONTAINER TIGHTLY CLOSED.
KEEP COOL.
STORE LOCKED UP.
DISPOSAL:
DISPOSE OF CONTENTS/CONTAINER IN ACCORDANCE WITH APPLICABLE
LOCAL/REGIONAL/NATIONAL/INTERNATIONAL REGULATIONS.
2.3. HAZARDS NOT OTHERWISE CLASSIFIED: NONE.
| SECTION 3: COMPOSITION/INFORMATION ON INGREDIENTS | |
INGREDIENT C.A.S. NO. % BY WT
ISOPARAFFINIC HYDROCARBON 64742-48-9 50 - 70
COTTON PADS NONE 25 - 40
D-LIMONENE 5989-27-5 5 - 20
| SECTION 4: FIRST AID MEASURES | |
4.1. DESCRIPTION OF FIRST AID MEASURES:
INHALATION:
REMOVE PERSON TO FRESH AIR. IF YOU FEEL UNWELL, GET MEDICAL ATTENTION.
SKIN CONTACT:
IMMEDIATELY WASH WITH SOAP AND WATER. REMOVE CONTAMINATED CLOTHING AND WASH
BEFORE REUSE. IF SIGNS/SYMPTOMS DEVELOP, GET MEDICAL ATTENTION.
EYE CONTACT: NO NEED FOR FIRST AID IS ANTICIPATED.
IF SWALLOWED:
RINSE MOUTH. IF YOU FEEL UNWELL, GET MEDICAL ATTENTION.
4.2. MOST IMPORTANT SYMPTOMS AND EFFECTS, BOTH ACUTE AND DELAYED:
SEE SECTION 11.1. INFORMATION ON TOXICOLOGICAL EFFECTS.
4.3. INDICATION OF ANY IMMEDIATE MEDICAL ATTENTION AND SPECIAL TREATMENT
REQUIRED: NOT APPLICABLE
| SECTION 5: FIRE-FIGHTING MEASURES | |
5.1. SUITABLE EXTINGUISHING MEDIA:
IN CASE OF FIRE:
USE A FIRE FIGHTING AGENT SUITABLE FOR FLAMMABLE LIQUIDS SUCH AS DRY
CHEMICAL OR CARBON DIOXIDE TO EXTINGUISH.
5.2. SPECIAL HAZARDS ARISING FROM THE SUBSTANCE OR MIXTURE:
CLOSED CONTAINERS EXPOSED TO HEAT FROM FIRE MAY BUILD PRESSURE AND EXPLODE.
5.3. SPECIAL PROTECTIVE ACTIONS FOR FIRE-FIGHTERS:
WATER MAY NOT EFFECTIVELY EXTINGUISH FIRE; HOWEVER, IT SHOULD BE USED TO
KEEP FIRE-EXPOSED CONTAINERS AND SURFACES COOL AND PREVENT EXPLOSIVE
RUPTURE.
| SECTION 6: ACCIDENTAL RELEASE MEASURES | |
6.1. PERSONAL PRECAUTIONS, PROTECTIVE EQUIPMENT AND EMERGENCY PROCEDURES:
EVACUATE AREA. KEEP AWAY FROM HEAT/SPARKS/OPEN FLAMES/HOT SURFACES. - NO
SMOKING. USE ONLY NON-SPARKING TOOLS. VENTILATE THE AREA WITH FRESH AIR.
FOR LARGE SPILL, OR SPILLS IN CONFINED SPACES, PROVIDE MECHANICAL
VENTILATION TO DISPERSE OR EXHAUST VAPORS, IN ACCORDANCE WITH GOOD
INDUSTRIAL HYGIENE PRACTICE.
WARNING!
A MOTOR COULD BE AN IGNITION SOURCE AND COULD CAUSE FLAMMABLE GASES OR
VAPORS IN THE SPILL AREA TO BURN OR EXPLODE. REFER TO OTHER SECTIONS OF
THIS SDS FOR INFORMATION REGARDING PHYSICAL AND HEALTH HAZARDS, RESPIRATORY
PROTECTION, VENTILATION, AND PERSONAL PROTECTIVE EQUIPMENT.
6.2. ENVIRONMENTAL PRECAUTIONS: AVOID RELEASE TO THE ENVIRONMENT.
6.3. METHODS AND MATERIAL FOR CONTAINMENT AND CLEANING UP:
CONTAIN SPILL. COVER SPILL AREA WITH A FIRE-EXTINGUISHING FOAM. AN
APPROPRIATE AQUEOUS FILM FORMING FOAM (AFFF) IS RECOMMENDED. REMEMBER,
ADDING AN ABSORBENT MATERIAL DOES NOT REMOVE A PHYSICAL, HEALTH, OR
ENVIRONMENTAL HAZARD. COLLECT AS MUCH OF THE SPILLED MATERIAL AS POSSIBLE
USING NON-SPARKING TOOLS. PLACE IN A METAL CONTAINER APPROVED FOR
TRANSPORTATION BY APPROPRIATE AUTHORITIES. CLEAN UP RESIDUE WITH AN
APPROPRIATE SOLVENT SELECTED BY A QUALIFIED AND AUTHORIZED PERSON.
VENTILATE THE AREA WITH FRESH AIR. READ AND FOLLOW SAFETY PRECAUTIONS ON
THE SOLVENT LABEL AND SDS. SEAL THE CONTAINER. DISPOSE OF COLLECTED
MATERIAL AS SOON AS POSSIBLE.
| SECTION 7: HANDLING AND STORAGE | |
7.1. PRECAUTIONS FOR SAFE HANDLING:
FOR INDUSTRIAL OR PROFESSIONAL USE ONLY. KEEP AWAY FROM HEAT/SPARKS/OPEN
FLAMES/HOT SURFACES. - NO SMOKING. AVOID BREATHING
DUST/FUME/GAS/MIST/VAPORS/SPRAY. DO NOT GET IN EYES, ON SKIN, OR ON
CLOTHING. DO NOT EAT, DRINK OR SMOKE WHEN USING THIS PRODUCT. WASH
THOROUGHLY AFTER HANDLING. CONTAMINATED WORK CLOTHING SHOULD NOT BE ALLOWED
OUT OF THE WORKPLACE. AVOID RELEASE TO THE ENVIRONMENT. WASH CONTAMINATED
CLOTHING BEFORE REUSE. AVOID CONTACT WITH OXIDIZING AGENTS (EG. CHLORINE,
CHROMIC ACID ETC.)
7.2. CONDITIONS FOR SAFE STORAGE INCLUDING ANY INCOMPATIBILITIES:
STORE IN A WELL-VENTILATED PLACE. KEEP CONTAINER TIGHTLY CLOSED. KEEP COOL.
PROTECT FROM SUNLIGHT. STORE AWAY FROM HEAT. STORE AWAY FROM ACIDS. STORE
AWAY FROM OXIDIZING AGENTS.
| SECTION 8: EXPOSURE CONTROLS/PERSONAL PROTECTION | |
8.1. CONTROL PARAMETERS:
OCCUPATIONAL EXPOSURE LIMITS:
IF A COMPONENT IS DISCLOSED IN SECTION 3 BUT DOES NOT APPEAR IN THE TABLE
BELOW, AN OCCUPATIONAL EXPOSURE LIMIT IS NOT AVAILABLE FOR THE COMPONENT.
INGREDIENT C.A.S. NO. AGENCY LIMIT TYPE ADDITIONAL
COMMENTS
ISOPARAFFINIC 64742-48-9 MANUFACTURER TWA: 100 PPM
HYDROCARBON DETERMINED
ACGIH: AMERICAN CONFERENCE OF GOVERNMENTAL INDUSTRIAL HYGIENISTS
AIHA: AMERICAN INDUSTRIAL HYGIENE ASSOCIATION
CMRG: CHEMICAL MANUFACTURER'S RECOMMENDED GUIDELINES
OSHA:
UNITED STATES DEPARTMENT OF LABOR - OCCUPATIONAL SAFETY AND HEALTH
ADMINISTRATION
TWA: TIME-WEIGHTED-AVERAGE
STEL: SHORT TERM EXPOSURE LIMIT
CEIL: CEILING
8.2. EXPOSURE CONTROLS:
8.2.1. ENGINEERING CONTROLS:
USE GENERAL DILUTION VENTILATION AND/OR LOCAL EXHAUST VENTILATION TO
CONTROL AIRBORNE EXPOSURES TO BELOW RELEVANT EXPOSURE LIMITS AND/OR CONTROL
DUST/FUME/GAS/MIST/VAPORS/SPRAY. IF VENTILATION IS NOT ADEQUATE, USE
RESPIRATORY PROTECTION EQUIPMENT.
8.2.2. PERSONAL PROTECTIVE EQUIPMENT (PPE):
EYE/FACE PROTECTION:
UNDER NORMAL USE CONDITIONS, EYE EXPOSURE IS NOT EXPECTED TO BE SIGNIFICANT
ENOUGH TO REQUIRE EYE PROTECTION.
SKIN/HAND PROTECTION:
SELECT AND USE GLOVES AND/OR PROTECTIVE CLOTHING APPROVED TO RELEVANT LOCAL
STANDARDS TO PREVENT SKIN CONTACT BASED ON THE RESULTS OF AN EXPOSURE
ASSESSMENT. SELECTION SHOULD BE BASED ON USE FACTORS SUCH AS EXPOSURE
LEVELS, CONCENTRATION OF THE SUBSTANCE OR MIXTURE, FREQUENCY AND DURATION,
PHYSICAL CHALLENGES SUCH AS TEMPERATURE EXTREMES, AND OTHER USE CONDITIONS.
CONSULT WITH YOUR GLOVE AND/OR PROTECTIVE CLOTHING MANUFACTURER FOR
SELECTION OF APPROPRIATE COMPATIBLE GLOVES/PROTECTIVE CLOTHING.
GLOVES MADE FROM THE FOLLOWING MATERIAL(S) ARE RECOMMENDED:
NITRILE RUBBER
POLYMER LAMINATE
IF THIS PRODUCT IS USED IN A MANNER THAT PRESENTS A HIGHER POTENTIAL FOR
EXPOSURE (EG. SPRAYING, HIGH SPLASH POTENTIAL ETC.), THEN USE OF PROTECTIVE
COVERALLS MAY BE NECESSARY. SELECT AND USE BODY PROTECTION TO PREVENT
CONTACT BASED ON THE RESULTS OF AN EXPOSURE ASSESSMENT.
THE FOLLOWING PROTECTIVE CLOTHING MATERIAL(S) ARE RECOMMENDED:
APRON - NITRILE
APRON - POLYMER LAMINATE
RESPIRATORY PROTECTION:
AN EXPOSURE ASSESSMENT MAY BE NEEDED TO DECIDE IF A RESPIRATOR IS REQUIRED.
IF A RESPIRATOR IS NEEDED, USE RESPIRATORS AS PART OF A FULL RESPIRATORY
PROTECTION PROGRAM. BASED ON THE RESULTS OF THE EXPOSURE ASSESSMENT, SELECT
FROM THE FOLLOWING RESPIRATOR TYPE(S) TO REDUCE INHALATION EXPOSURE:
HALF FACEPIECE OR FULL FACEPIECE AIR-PURIFYING RESPIRATOR SUITABLE FOR
ORGANIC VAPORS
FOR QUESTIONS ABOUT SUITABILITY FOR A SPECIFIC APPLICATION, CONSULT WITH
YOUR RESPIRATOR MANUFACTURER.
| SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES | |
9.1. INFORMATION ON BASIC PHYSICAL AND CHEMICAL PROPERTIES:
GENERAL PHYSICAL FORM: SOLID (LINT-FREE CLOTHS SOAKED WITH LIQUID)
SPECIFIC PHYSICAL FORM: CLOTH PADS SOAKED IN LIQUID IN CAN OR BAG
ODOR, COLOR, GRADE: CITRUS-LIKE ODOR
ODOR THRESHOLD: NO DATA AVAILABLE
PH: 7.0
MELTING POINT: NO DATA AVAILABLE
BOILING POINT: 380 DEG. F - 480 DEG. F
FLASH POINT: 144 DEG. F [TEST METHOD: CLOSED CUP]
EVAPORATION RATE: NO DATA AVAILABLE
FLAMMABILITY (SOLID, GAS): NOT CLASSIFIED
FLAMMABLE LIMITS(LEL): NO DATA AVAILABLE
FLAMMABLE LIMITS(UEL): NO DATA AVAILABLE
VAPOR PRESSURE: <1 MMHg [@ 25 DEG. C]
VAPOR DENSITY: >1 [REF STD: AIR=1]
SPECIFIC GRAVITY: 0.76 [REF STD: WATER=1]
SOLUBILITY IN WATER: NIL
SOLUBILITY- NON-WATER: NO DATA AVAILABLE
PARTITION COEFFICIENT N-OCTANOL/WATER: NO DATA AVAILABLE
AUTOIGNITION TEMPERATURE: NO DATA AVAILABLE
DECOMPOSITION TEMPERATURE: NO DATA AVAILABLE
VISCOSITY: 1.5 CENTIPOISE
VOLATILE ORGANIC COMPOUNDS: APPROXIMATELY 740 G/L
VOC LESS H2O & EXEMPT SOLVENTS: 760 G/L
| SECTION 10: STABILITY AND REACTIVITY | |
10.1. REACTIVITY:
THIS MATERIAL MAY BE REACTIVE WITH CERTAIN AGENTS UNDER CERTAIN
CONDITIONS - SEE THE REMAINING HEADINGS IN THIS SECTION.
10.2. CHEMICAL STABILITY: STABLE.
10.3. POSSIBILITY OF HAZARDOUS REACTIONS:
HAZARDOUS POLYMERIZATION WILL NOT OCCUR.
10.4. CONDITIONS TO AVOID: SPARKS AND/OR FLAMES
10.5. INCOMPATIBLE MATERIALS: STRONG OXIDIZING AGENTS
10.6. HAZARDOUS DECOMPOSITION PRODUCTS:
SUBSTANCE CONDITION
CARBON MONOXIDE NOT SPECIFIED
CARBON DIOXIDE NOT SPECIFIED
| SECTION 11: TOXICOLOGICAL INFORMATION | |
THE INFORMATION BELOW MAY NOT BE CONSISTENT WITH THE MATERIAL
CLASSIFICATION IN SECTION 2 IF SPECIFIC INGREDIENT CLASSIFICATIONS ARE
MANDATED BY A COMPETENT AUTHORITY. IN ADDITION, TOXICOLOGICAL DATA ON
INGREDIENTS MAY NOT BE REFLECTED IN THE MATERIAL CLASSIFICATION AND/OR THE
SIGNS AND SYMPTOMS OF EXPOSURE, BECAUSE AN INGREDIENT MAY BE PRESENT BELOW
THE THRESHOLD FOR LABELING, AN INGREDIENT MAY NOT BE AVAILABLE FOR
EXPOSURE, OR THE DATA MAY NOT BE RELEVANT TO THE MATERIAL AS A WHOLE.
11.1. INFORMATION ON TOXICOLOGICAL EFFECTS:
SIGNS AND SYMPTOMS OF EXPOSURE:
BASED ON TEST DATA AND/OR INFORMATION ON THE COMPONENTS, THIS MATERIAL MAY
PRODUCE THE FOLLOWING HEALTH EFFECTS:
INHALATION:
RESPIRATORY TRACT IRRITATION:
SIGNS/SYMPTOMS MAY INCLUDE COUGH, SNEEZING, NASAL DISCHARGE, HEADACHE,
HOARSENESS, AND NOSE AND THROAT PAIN.
MAY CAUSE ADDITIONAL HEALTH EFFECTS (SEE BELOW).
SKIN CONTACT:
SKIN IRRITATION:
SIGNS/SYMPTOMS MAY INCLUDE LOCALIZED REDNESS, SWELLING, ITCHING, DRYNESS,
CRACKING, BLISTERING, AND PAIN.
ALLERGIC SKIN REACTION (NON-PHOTO INDUCED):
SIGNS/SYMPTOMS MAY INCLUDE REDNESS, SWELLING, BLISTERING, AND ITCHING.
EYE CONTACT:
CONTACT WITH THE EYES DURING PRODUCT USE IS NOT EXPECTED TO RESULT IN
SIGNIFICANT IRRITATION.
INGESTION:
PHYSICAL BLOCKAGE:
SIGNS/SYMPTOMS MAY INCLUDE CRAMPING, ABDOMINAL PAIN, AND CONSTIPATION.
GASTROINTESTINAL IRRITATION:
SIGNS/SYMPTOMS MAY INCLUDE ABDOMINAL PAIN, STOMACH UPSET, NAUSEA, VOMITING
AND DIARRHEA.
ADDITIONAL HEALTH EFFECTS:
SINGLE EXPOSURE MAY CAUSE TARGET ORGAN EFFECTS:
CENTRAL NERVOUS SYSTEM (CNS) DEPRESSION:
SIGNS/SYMPTOMS MAY INCLUDE HEADACHE, DIZZINESS, DROWSINESS, INCOORDINATION,
NAUSEA, SLOWED REACTION TIME, SLURRED SPEECH, GIDDINESS, AND
UNCONSCIOUSNESS.
TOXICOLOGICAL DATA:
IF A COMPONENT IS DISCLOSED IN SECTION 3 BUT DOES NOT APPEAR IN A TABLE
BELOW, EITHER NO DATA ARE AVAILABLE FOR THAT ENDPOINT OR THE DATA ARE NOT
SUFFICIENT FOR CLASSIFICATION.
ACUTE TOXICITY:
NAME ROUTE SPECIES VALUE
OVERALL PRODUCT INGESTION NO DATA AVAILABLE; CALCULATED
ATE: >5,000 MG/KG
ISOPARAFFINIC INHALATION- LC50:
HYDROCARBON VAPOR ESTIMATED TO BE 20 - 50 MG/L
ISOPARAFFINIC DERMAL RABBIT LD50: >3,000 MG/KG
HYDROCARBON
ISOPARAFFINIC INGESTION RAT LD50: >5,000 MG/KG
HYDROCARBON
D-LIMONENE INHALATION- MOUSE LC50: >3.14 MG/L
VAPOR
(4 HOURS)
D-LIMONENE DERMAL RABBIT LD50: >5,000 MG/KG
D-LIMONENE INGESTION RAT LD50: 4,400 MG/KG
ATE = ACUTE TOXICITY ESTIMATE
SKIN CORROSION/IRRITATION:
NAME SPECIES VALUE
ISOPARAFFINIC HYDROCARBON RABBIT IRRITANT
D-LIMONENE RABBIT MILD IRRITANT
SERIOUS EYE DAMAGE/IRRITATION:
NAME SPECIES VALUE
ISOPARAFFINIC HYDROCARBON RABBIT NO SIGNIFICANT IRRITATION
D-LIMONENE RABBIT MILD IRRITANT
SKIN SENSITIZATION:
NAME SPECIES VALUE
ISOPARAFFINIC HYDROCARBON GUINEA NOT SENSITIZING
PIG
D-LIMONENE MOUSE SENSITIZING
RESPIRATORY SENSITIZATION:
FOR THE COMPONENT/COMPONENTS, EITHER NO DATA ARE CURRENTLY AVAILABLE OR THE
DATA ARE NOT SUFFICIENT FOR CLASSIFICATION.
GERM CELL MUTAGENICITY:
NAME ROUTE VALUE
ISOPARAFFINIC HYDROCARBON IN VIVO NOT MUTAGENIC
ISOPARAFFINIC HYDROCARBON IN VITRO SOME POSITIVE DATA EXIST, BUT THE
DATA ARE NOT SUFFICIENT FOR
CLASSIFICATION
D-LIMONENE IN VITRO NOT MUTAGENIC
D-LIMONENE IN VIVO NOT MUTAGENIC
CARCINOGENICITY:
NAME ROUTE SPECIES VALUE
ISOPARAFFINIC DERMAL MOUSE SOME POSITIVE DATA EXIST, BUT THE
HYDROCARBON DATA ARE NOT SUFFICIENT FOR
CLASSIFICATION
ISOPARAFFINIC INHALATION HUMAN SOME POSITIVE DATA EXIST, BUT THE
HYDROCARBON AND DATA ARE NOT SUFFICIENT FOR
ANIMAL CLASSIFICATION
D-LIMONENE INGESTION RAT SOME POSITIVE DATA EXIST, BUT THE
DATA ARE NOT SUFFICIENT FOR
CLASSIFICATION
REPRODUCTIVE TOXICITY:
REPRODUCTIVE AND/OR DEVELOPMENTAL EFFECTS:
NAME ROUTE VALUE
ISOPARAFFINIC HYDROCARBON INHALATION NOT TOXIC TO DEVELOPMENT
D-LIMONENE INGESTION NOT TOXIC TO MALE REPRODUCTION
D-LIMONENE INGESTION SOME POSITIVE FEMALE REPRODUCTIVE
DATA EXIST, BUT THE DATA ARE NOT
SUFFICIENT FOR CLASSIFICATION
D-LIMONENE INGESTION SOME POSITIVE DEVELOPMENTAL DATA
EXIST, BUT THE DATA ARE NOT
SUFFICIENT FOR CLASSIFICATION
NAME SPECIES TEST RESULT EXPOSURE DURATION
ISOPARAFFINIC RAT NOAEL: 2.4 MG/L DURING ORGANOGENESIS
HYDROCARBON
D-LIMONENE RAT NOAEL: 150 MG/KG/DAY 103 WEEKS
D-LIMONENE RAT NOAEL: 750 MG/KG/DAY PREMATING & DURING
GESTATION
D-LIMONENE MULTIPLE NOAEL: 591 MG/KG/DAY DURING
ANIMAL ORGANOGENESIS
SPECIES
TARGET ORGAN(S):
SPECIFIC TARGET ORGAN TOXICITY - SINGLE EXPOSURE:
NAME ROUTE TARGET ORGAN(S) VALUE
ISOPARAFFINIC INHALATION CENTRAL NERVOUS MAY CAUSE DROWSINESS OR
HYDROCARBON SYSTEM DEPRESSION DIZZINESS
ISOPARAFFINIC INHALATION RESPIRATORY SOME POSITIVE DATA EXIST,
HYDROCARBON IRRITATION BUT THE DATA ARE NOT
SUFFICIENT FOR
CLASSIFICATION
ISOPARAFFINIC INHALATION NERVOUS SYSTEM SOME POSITIVE DATA EXIST,
HYDROCARBON BUT THE DATA ARE NOT
SUFFICIENT FOR
CLASSIFICATION
D-LIMONENE INGESTION NERVOUS SYSTEM SOME POSITIVE DATA EXIST,
BUT THE DATA ARE NOT
SUFFICIENT FOR
CLASSIFICATION
NAME SPECIES TEST RESULT EXPOSURE DURATION
ISOPARAFFINIC HUMAN NOAEL:
HYDROCARBON AND NOT AVAILABLE
ANIMAL
ISOPARAFFINIC NOAEL:
HYDROCARBON NOT AVAILABLE
ISOPARAFFINIC DOG NOAEL: 6.5 MG/L 4 HOURS
HYDROCARBON
D-LIMONENE NOAEL:
NOT AVAILABLE
SPECIFIC TARGET ORGAN TOXICITY - REPEATED EXPOSURE:
NAME ROUTE TARGET ORGAN(S) VALUE
ISOPARAFFINIC INHALATION NERVOUS SYSTEM SOME POSITIVE DATA EXIST,
HYDROCARBON BUT THE DATA ARE NOT
SUFFICIENT FOR
CLASSIFICATION
ISOPARAFFINIC INHALATION KIDNEY AND/OR SOME POSITIVE DATA EXIST,
HYDROCARBON BLADDER BUT THE DATA ARE NOT
SUFFICIENT FOR
CLASSIFICATION
ISOPARAFFINIC INHALATION RESPIRATORY SOME POSITIVE DATA EXIST,
HYDROCARBON SYSTEM BUT THE DATA ARE NOT
SUFFICIENT FOR
CLASSIFICATION
ISOPARAFFINIC INHALATION BONE, TEETH, ALL DATA ARE NEGATIVE
HYDROCARBON NAILS,
AND/OR HAIR
BLOOD
LIVER
MUSCLES
ISOPARAFFINIC INHALATION HEART ALL DATA ARE NEGATIVE
HYDROCARBON
D-LIMONENE INGESTION KIDNEY AND/OR SOME POSITIVE DATA EXIST,
BLADDER BUT THE DATA ARE NOT
SUFFICIENT FOR
CLASSIFICATION
D-LIMONENE INGESTION LIVER SOME POSITIVE DATA EXIST,
BUT THE DATA ARE NOT
SUFFICIENT FOR
CLASSIFICATION
D-LIMONENE INGESTION HEART ALL DATA ARE NEGATIVE
ENDOCRINE SYSTEM
BONE, TEETH,
NAILS, AND/OR
HAIR
HEMATOPOIETIC
SYSTEM
IMMUNE SYSTEM
MUSCLES
NERVOUS SYSTEM
RESPIRATORY
SYSTEM
NAME SPECIES TEST RESULT EXPOSURE DURATION
ISOPARAFFINIC RAT LOAEL: 4.6 MG/L 6 MONTHS
HYDROCARBON
ISOPARAFFINIC RAT LOAEL: 1.9 MG/L 13 WEEKS
HYDROCARBON
ISOPARAFFINIC MULTIPLE NOAEL: 0.6 MG/L 90 DAYS
HYDROCARBON ANIMAL
SPECIES
ISOPARAFFINIC RAT NOAEL: 5.6 MG/L 12 WEEKS
HYDROCARBON
ISOPARAFFINIC MULTIPLE NOAEL: 1.3 MG/L 90 DAYS
HYDROCARBON ANIMAL
SPECIES
D-LIMONENE RAT LOAEL: 75 MG/KG/DAY 103 WEEKS
D-LIMONENE MOUSE NOAEL: 1,000 MG/KG/DAY 103 WEEKS
D-LIMONENE RAT NOAEL: 600 MG/KG/DAY 103 WEEKS
ASPIRATION HAZARD:
NAME VALUE
ISOPARAFFINIC HYDROCARBON ASPIRATION HAZARD
D-LIMONENE ASPIRATION HAZARD
PLEASE CONTACT THE ADDRESS OR PHONE NUMBER LISTED IN SECTION 1 OF THIS
SDS FOR ADDITIONAL TOXICOLOGICAL INFORMATION ON THIS MATERIAL AND/OR
ITS COMPONENTS.
| SECTION 12: ECOLOGICAL INFORMATION | |
ECOTOXICOLOGICAL INFORMATION:
PLEASE CONTACT THE ADDRESS OR PHONE NUMBER LISTED IN SECTION 1 OF THIS
SDS FOR ADDITIONAL ECOTOXICOLOGICAL INFORMATION ON THIS MATERIAL AND/OR
ITS COMPONENTS.
CHEMICAL FATE INFORMATION:
PLEASE CONTACT THE ADDRESS OR PHONE NUMBER LISTED IN SECTION 1 OF THIS
SDS FOR ADDITIONAL CHEMICAL FATE INFORMATION ON THIS MATERIAL AND/OR
ITS COMPONENTS.
| SECTION 13: DISPOSAL CONSIDERATIONS | |
13.1. DISPOSAL METHODS:
DISPOSE OF CONTENTS/CONTAINER IN ACCORDANCE WITH THE
LOCAL/REGIONAL/NATIONAL/INTERNATIONAL REGULATIONS.
INCINERATE IN A PERMITTED WASTE INCINERATION FACILITY. PROPER DESTRUCTION
MAY REQUIRE THE USE OF ADDITIONAL FUEL DURING INCINERATION PROCESSES. AS A
DISPOSAL ALTERNATIVE, DISPOSE OF WASTE PRODUCT IN A PERMITTED INDUSTRIAL
WASTE FACILITY. EMPTY DRUMS/BARRELS/CONTAINERS USED FOR TRANSPORTING AND
HANDLING HAZARDOUS CHEMICALS (CHEMICAL SUBSTANCES/MIXTURES/PREPARATIONS
CLASSIFIED AS HAZARDOUS AS PER APPLICABLE REGULATIONS) SHALL BE CONSIDERED,
STORED, TREATED & DISPOSED OF AS HAZARDOUS WASTES UNLESS OTHERWISE DEFINED
BY APPLICABLE WASTE REGULATIONS. CONSULT WITH THE RESPECTIVE REGULATING
AUTHORITIES TO DETERMINE THE AVAILABLE TREATMENT AND DISPOSAL FACILITIES.
EPA HAZARDOUS WASTE NUMBER (RCRA): NOT REGULATED
| SECTION 14: TRANSPORT INFORMATION | |
FOR TRANSPORT INFORMATION, PLEASE VISIT:
HTTP://3M.COM/TRANSPORTINFO OR CALL 1-800-364-3577 OR 651-737-6501.
| SECTION 15: REGULATORY INFORMATION | |
15.1. US FEDERAL REGULATIONS: CONTACT 3M FOR MORE INFORMATION.
311/312 HAZARD CATEGORIES:
FIRE HAZARD: YES
PRESSURE HAZARD: NO
REACTIVITY HAZARD: NO
IMMEDIATE HAZARD: YES
DELAYED HAZARD: NO
15.2. STATE REGULATIONS: CONTACT 3M FOR MORE INFORMATION.
15.3. CHEMICAL INVENTORIES:
THE COMPONENTS OF THIS MATERIAL ARE IN COMPLIANCE WITH THE PROVISIONS OF
AUSTRALIA NATIONAL INDUSTRIAL CHEMICAL NOTIFICATION AND ASSESSMENT SCHEME
(NICNAS). CERTAIN RESTRICTIONS MAY APPLY. CONTACT THE SELLING DIVISION FOR
ADDITIONAL INFORMATION.
THE COMPONENTS OF THIS PRODUCT ARE IN COMPLIANCE WITH THE NEW SUBSTANCE
NOTIFICATION REQUIREMENTS OF CEPA.
THE COMPONENTS OF THIS MATERIAL ARE IN COMPLIANCE WITH THE PROVISIONS OF
THE KOREAN TOXIC CHEMICAL CONTROL LAW. CERTAIN RESTRICTIONS MAY APPLY.
CONTACT THE SELLING DIVISION FOR ADDITIONAL INFORMATION.
THE COMPONENTS OF THIS MATERIAL ARE IN COMPLIANCE WITH THE PROVISIONS OF
PHILIPPINES RA 6969 REQUIREMENTS. CERTAIN RESTRICTIONS MAY APPLY. CONTACT
THE SELLING DIVISION FOR ADDITIONAL INFORMATION.
THE COMPONENTS OF THIS PRODUCT ARE IN COMPLIANCE WITH THE CHEMICAL
NOTIFICATION REQUIREMENTS OF TSCA.
CONTACT 3M FOR MORE INFORMATION.
15.4. INTERNATIONAL REGULATIONS: CONTACT 3M FOR MORE INFORMATION.
THIS SDS HAS BEEN PREPARED TO MEET THE U.S. OSHA HAZARD COMMUNICATION
STANDARD, 29 CFR 1910.1200.
| SECTION 16: OTHER INFORMATION | |
NFPA HAZARD CLASSIFICATION:
HEALTH 2
FLAMMABILITY 2
INSTABILITY 0
SPECIAL HAZARDS NONE
NATIONAL FIRE PROTECTION ASSOCIATION (NFPA) HAZARD RATINGS ARE DESIGNED FOR
USE BY EMERGENCY RESPONSE PERSONNEL TO ADDRESS THE HAZARDS THAT ARE
PRESENTED BY SHORT-TERM, ACUTE EXPOSURE TO A MATERIAL UNDER CONDITIONS OF
FIRE, SPILL, OR SIMILAR EMERGENCIES. HAZARD RATINGS ARE PRIMARILY BASED ON
THE INHERENT PHYSICAL AND TOXIC PROPERTIES OF THE MATERIAL BUT ALSO INCLUDE
THE TOXIC PROPERTIES OF COMBUSTION OR DECOMPOSITION PRODUCTS THAT ARE KNOWN
TO BE GENERATED IN SIGNIFICANT QUANTITIES.
HMIS HAZARD CLASSIFICATION:
HEALTH 2*
FLAMMABILITY 2
PHYSICAL HAZARD 0
PERSONAL PROTECTION B
HAZARDOUS MATERIAL IDENTIFICATION SYSTEM (HMIS(R*) III) HAZARD RATINGS ARE
DESIGNED TO INFORM EMPLOYEES OF CHEMICAL HAZARDS IN THE WORKPLACE. THESE
RATINGS ARE BASED ON THE INHERENT PROPERTIES OF THE MATERIAL UNDER EXPECTED
CONDITIONS OF NORMAL USE AND ARE NOT INTENDED FOR USE IN EMERGENCY
SITUATIONS. HMIS(R*) III RATINGS ARE TO BE USED WITH A FULLY IMPLEMENTED
HMIS(R*) III PROGRAM. HMIS(R*) IS A REGISTERED MARK OF THE AMERICAN
COATINGS ASSOCIATION (ACA).
DOCUMENT GROUP: 11-4628-1
VERSION NUMBER: 34.02
ISSUE DATE: 04/24/15
SUPERCEDES DATE: 10/20/14
DISCLAIMER:
THE INFORMATION IN THIS SAFETY DATA SHEET (SDS) IS BELIEVED TO BE CORRECT
AS OF THE DATE ISSUED. 3M MAKES NO WARRANTIES, EXPRESSED OR IMPLIED,
INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE OR COURSE OF PERFORMANCE OR USAGE OF
TRADE. USER IS RESPONSIBLE FOR DETERMINING WHETHER THE 3M PRODUCT IS FIT
FOR A PARTICULAR PURPOSE AND SUITABLE FOR USER'S METHOD OF USE OR
APPLICATION. GIVEN THE VARIETY OF FACTORS THAT CAN AFFECT THE USE AND
APPLICATION OF A 3M PRODUCT, SOME OF WHICH ARE UNIQUELY WITHIN THE USER'S
KNOWLEDGE AND CONTROL, IT IS ESSENTIAL THAT THE USER EVALUATE THE 3M
PRODUCT TO DETERMINE WHETHER IT IS FIT FOR A PARTICULAR PURPOSE AND
SUITABLE FOR USER'S METHOD OF USE OR APPLICATION.
3M PROVIDES INFORMATION IN ELECTRONIC FORM AS A SERVICE TO ITS CUSTOMERS.
DUE TO THE REMOTE POSSIBILITY THAT ELECTRONIC TRANSFER MAY HAVE RESULTED IN
ERRORS, OMISSIONS OR ALTERATIONS IN THIS INFORMATION, 3M MAKES NO
REPRESENTATIONS AS TO ITS COMPLETENESS OR ACCURACY. IN ADDITION,
INFORMATION OBTAINED FROM A DATABASE MAY NOT BE AS CURRENT AS THE
INFORMATION IN THE SDS AVAILABLE DIRECTLY FROM 3M
3M USA SDSS ARE AVAILABLE AT WWW.3M.COM
BLACK EPDM TUBING (ON PLASTIC CORE)
09/01/15
3M
ARTICLE INFORMATION SHEET
COPYRIGHT, 2015, 3M COMPANY.
ALL RIGHTS RESERVED. COPYING AND/OR DOWNLOADING OF THIS INFORMATION FOR THE
PURPOSE OF PROPERLY UTILIZING 3M PRODUCTS IS ALLOWED PROVIDED THAT:
(1) THE INFORMATION IS COPIED IN FULL WITH NO CHANGES UNLESS PRIOR WRITTEN
AGREEMENT IS OBTAINED FROM 3M, AND
(2) NEITHER THE COPY NOR THE ORIGINAL IS RESOLD OR OTHERWISE DISTRIBUTED
WITH THE INTENTION OF EARNING A PROFIT THEREON.
THIS ARTICLE INFORMATION SHEET IS PROVIDED AS A COURTESY IN RESPONSE TO A
CUSTOMER REQUEST. A SAFETY DATA SHEET (SDS) HAS NOT BEEN PREPARED FOR THESE
PRODUCT(S) BECAUSE THEY ARE ARTICLES. ARTICLES ARE NOT SUBJECT TO THE
OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION'S HAZARD COMMUNICATION
STANDARD (29 CFR 1910.1200(B)(6)(V)).
AS DEFINED IN THIS STANDARD:
"ARTICLE" MEANS A MANUFACTURED ITEM OTHER THAN A FLUID OR PARTICLE:
(I) WHICH IS FORMED TO A SPECIFIC SHAPE OR DESIGN DURING MANUFACTURE
(II) WHICH HAS END USE FUNCTION(S) DEPENDENT IN WHOLE OR IN PART UPON ITS
SHAPE OR DESIGN DURING END USE; AND
(III) WHICH UNDER NORMAL CONDITIONS OF USE DOES NOT RELEASE MORE THAN VERY
SMALL QUANTITIES, E.G., MINUTE OR TRACE AMOUNTS OF A HAZARDOUS CHEMICAL,
AND DOES NOT POSE A PHYSICAL OR HEALTH RISK TO EMPLOYEES.
DOCUMENT GROUP: 34-7684-3
VERSION NUMBER: 3.01
ISSUE DATE: 09/01/15
SUPERCEDES DATE: 07/14/15
| SECTION 1: IDENTIFICATION | |
1.1. PRODUCT IDENTIFIER: BLACK EPDM TUBING (ON PLASTIC CORE)
1.2. RECOMMENDED USE AND RESTRICTIONS ON USE:
RECOMMENDED USE: ELECTRICAL
1.3. SUPPLIER'S DETAILS:
MANUFACTURER: 3M
DIVISION: ELECTRICAL MARKETS DIVISION
ADDRESS:
3M CENTER
ST. PAUL, MN 55144-1000
USA
TELEPHONE: 1-888-3M HELPS (1-888-364-3577)
1.4. EMERGENCY TELEPHONE NUMBER:
1-800-364-3577 OR (651) 737-6501 (24 HOURS)
| SECTION 2: HAZARD IDENTIFICATION | |
THIS PRODUCT IS EXEMPT FROM HAZARD CLASSIFICATION ACCORDING TO OSHA HAZARD
COMMUNICATION STANDARD, 29 CFR 1910.1200.
| SECTION 3: COMPOSITION/INFORMATION ON INGREDIENTS | |
INGREDIENT C.A.S. NO. % BY WT
BLACK EPDM TUBE MIXTURE 100
PHENOL, 2-(2H-BENZOTRIAZOL-2-YL)- 25973-55-1 0 - 03
4,6-BIS(1,1-DIMETHYLPROPYL)-
| SECTION 4: FIRST AID MEASURES | |
4.1. DESCRIPTION OF FIRST AID MEASURES:
INHALATION: NO NEED FOR FIRST AID IS ANTICIPATED.
SKIN CONTACT: NO NEED FOR FIRST AID IS ANTICIPATED.
EYE CONTACT: NO NEED FOR FIRST AID IS ANTICIPATED.
IF SWALLOWED: NO NEED FOR FIRST AID IS ANTICIPATED.
| SECTION 5: FIRE-FIGHTING MEASURES | |
IN CASE OF FIRE:
USE A CARBON DIOXIDE OR DRY CHEMICAL EXTINGUISHER TO EXTINGUISH.
| SECTION 6: ACCIDENTAL RELEASE MEASURES | |
6.1. PERSONAL PRECAUTIONS, PROTECTIVE EQUIPMENT AND EMERGENCY PROCEDURES:
NOT APPLICABLE.
6.2. ENVIRONMENTAL PRECAUTIONS: NOT APPLICABLE.
6.3. METHODS AND MATERIAL FOR CONTAINMENT AND CLEANING UP: NOT APPLICABLE.
| SECTION 7: HANDLING AND STORAGE | |
7.1. PRECAUTIONS FOR SAFE HANDLING:
THIS PRODUCT IS CONSIDERED TO BE AN ARTICLE WHICH DOES NOT RELEASE OR
OTHERWISE RESULT IN EXPOSURE TO A HAZARDOUS CHEMICAL UNDER NORMAL USE
CONDITIONS.
7.2. CONDITIONS FOR SAFE STORAGE INCLUDING ANY INCOMPATIBILITIES:
NO SPECIAL STORAGE REQUIREMENTS.
| SECTION 8: EXPOSURE CONTROLS/PERSONAL PROTECTION | |
THIS PRODUCT IS CONSIDERED TO BE AN ARTICLE WHICH DOES NOT RELEASE OR
OTHERWISE RESULT IN EXPOSURE TO A HAZARDOUS CHEMICAL UNDER NORMAL USE
CONDITIONS. NO ENGINEERING CONTROLS OR PERSONAL PROTECTIVE EQUIPMENT (PPE)
ARE NECESSARY.
| SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES | |
9.1. INFORMATION ON BASIC PHYSICAL AND CHEMICAL PROPERTIES:
GENERAL PHYSICAL FORM: SOLID
ODOR, COLOR, GRADE: BLACK EPDM TUBE
ODOR THRESHOLD: NOT APPLICABLE
PH: NOT APPLICABLE
MELTING POINT: NO DATA AVAILABLE
BOILING POINT: NOT APPLICABLE
FLASH POINT: NO FLASH POINT
EVAPORATION RATE: NOT APPLICABLE
FLAMMABILITY (SOLID, GAS): NOT CLASSIFIED
FLAMMABLE LIMITS(LEL): NOT APPLICABLE
FLAMMABLE LIMITS(UEL): NOT APPLICABLE
VAPOR PRESSURE: NOT APPLICABLE
VAPOR DENSITY: NOT APPLICABLE
DENSITY: NO DATA AVAILABLE
SPECIFIC GRAVITY: NO DATA AVAILABLE
SOLUBILITY IN WATER: NOT APPLICABLE
SOLUBILITY-NON-WATER: NOT APPLICABLE
PARTITION COEFFICIENT N-OCTANOL/WATER: NOT APPLICABLE
AUTOIGNITION TEMPERATURE: NOT APPLICABLE
DECOMPOSITION TEMPERATURE: NO DATA AVAILABLE
VISCOSITY: NOT APPLICABLE
| SECTION 10: STABILITY AND REACTIVITY | |
THIS MATERIAL IS CONSIDERED TO BE NON REACTIVE UNDER NORMAL USE CONDITIONS.
| SECTION 11: TOXICOLOGICAL INFORMATION | |
INHALATION: NO HEALTH EFFECTS ARE EXPECTED
SKIN CONTACT: NO HEALTH EFFECTS ARE EXPECTED
EYE CONTACT: NO HEALTH EFFECTS ARE EXPECTED
INGESTION: NO HEALTH EFFECTS ARE EXPECTED
ADDITIONAL INFORMATION:
THIS PRODUCT, WHEN USED UNDER REASONABLE CONDITIONS AND IN ACCORDANCE WITH
THE DIRECTIONS FOR USE, SHOULD NOT PRESENT A HEALTH HAZARD. HOWEVER, USE OR
PROCESSING OF THE PRODUCT IN A MANNER NOT IN ACCORDANCE WITH THE PRODUCT'S
DIRECTIONS FOR USE MAY AFFECT THE PERFORMANCE OF THE PRODUCT AND MAY
PRESENT POTENTIAL HEALTH AND SAFETY HAZARDS.
| SECTION 12: ECOLOGICAL INFORMATION | |
THIS ARTICLE IS EXPECTED TO PRESENT A LOW ENVIRONMENTAL RISK EITHER BECAUSE
USE AND DISPOSAL ARE UNLIKELY TO RESULT IN A SIGNIFICANT RELEASE OF
COMPONENTS TO THE ENVIRONMENT OR BECAUSE THOSE COMPONENTS THAT MAY BE
RELEASED ARE EXPECTED TO HAVE INSIGNIFICANT ENVIRONMENTAL IMPACT.
| SECTION 13: DISPOSAL CONSIDERATIONS | |
DISPOSE OF CONTENTS/CONTAINER IN ACCORDANCE WITH THE
LOCAL/REGIONAL/NATIONAL/INTERNATIONAL REGULATIONS.
| SECTION 14: TRANSPORT INFORMATION | |
FOR TRANSPORT INFORMATION, PLEASE VISIT:
HTTP://3M.COM/TRANSPORTINFO OR CALL 1-800-364-3577 OR 651-737-6501.
| SECTION 15: REGULATORY INFORMATION | |
CHEMICAL INVENTORIES:
THIS PRODUCT IS AN ARTICLE AS DEFINED BY TSCA REGULATIONS, AND IS EXEMPT
FROM TSCA INVENTORY REQUIREMENTS.
| SECTION 16: OTHER INFORMATION | |
DOCUMENT GROUP: 34-7684-3
VERSION NUMBER: 3.01
ISSUE DATE: 09/01/15
SUPERCEDES DATE: 07/14/15
DISCLAIMER:
THE INFORMATION IN THIS ARTICLE INFORMATION SHEET (AIS) IS BELIEVED TO BE
CORRECT AS OF THE DATE ISSUED. 3M MAKES NO WARRANTIES, EXPRESSED OR
IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR COURSE OF
PERFORMANCE OR USAGE OF TRADE. USER IS RESPONSIBLE FOR DETERMINING WHETHER
THE 3M PRODUCT IS FIT FOR A PARTICULAR PURPOSE AND SUITABLE FOR USER'S
METHOD OF USE OR APPLICATION. GIVEN THE VARIETY OF FACTORS THAT CAN AFFECT
THE USE AND APPLICATION OF A 3M PRODUCT, SOME OF WHICH ARE UNIQUELY WITHIN
THE USER'S KNOWLEDGE AND CONTROL, IT IS ESSENTIAL THAT THE USER EVALUATE
THE 3M PRODUCT TO DETERMINE WHETHER IT IS FIT FOR A PARTICULAR PURPOSE AND
SUITABLE FOR USER'S METHOD OF USE OR APPLICATION.
3M PROVIDES INFORMATION IN ELECTRONIC FORM AS A SERVICE TO ITS CUSTOMERS.
DUE TO THE REMOTE POSSIBILITY THAT ELECTRONIC TRANSFER MAY HAVE RESULTED IN
ERRORS, OMISSIONS OR ALTERATIONS IN THIS INFORMATION, 3M MAKES NO
REPRESENTATIONS AS TO ITS COMPLETENESS OR ACCURACY. IN ADDITION,
INFORMATION OBTAINED FROM A DATABASE MAY NOT BE AS CURRENT AS THE
INFORMATION IN THE AIS AVAILABLE DIRECTLY FROM 3M.
3M USA AISS ARE AVAILABLE AT WWW.3M.COM