| Common Name: | LITHIUM SULPHUR DIOXIDE PRIMARY UNIT CELLS AND MULTI-CELL BATTERY SYSTEMS COMPOS |
| Manufacturer: | SAFT |
| SDS Revision Date: | 2/1/2018 |
| SDS Format: | OTHER INFORMATION SHEET |
| Item Number(s): | 60MP09, 60MP15, 60MP23, 60MP24, 667V20, 667V23, 667V33, 667V34 |
| Manufacturer Model Number(s): |
SDS Table of Contents
Click the desired link below to jump directly to that section in the SDS.
S
SAFT
BATTERY INFORMATION SHEET
PRIMARY Li-SO2 SINGLE CELLS AND MULTI-CELL BATTERY PACKS
ACCORDING TO REACH REGULATION (EC 1907/2006, ART 31) AND TO OSHA REGULATION
(29 CFR 1910.1200), BATTERIES ARE ARTICLES WITH NO INTENDED RELEASE. AS
SUCH, THEY ARE NOT COVERED BY LEGAL REQUIREMENTS TO GENERATE AND SUPPLY AN
SDS OR AN MSDS.
THIS BATTERY INFORMATION SHEET IS PROVIDED SOLELY AS INFORMATION DOCUMENT
FOR THE PURPOSE OF ASSISTING OUR CUSTOMERS.
| 1. IDENTIFICATION |  |
1.1 PRODUCT:
LITHIUM SULPHUR DIOXIDE PRIMARY UNIT CELLS AND MULTI-CELL BATTERY SYSTEMS
COMPOSED OF THESE CELLS
1.2 SUPPLIER:
HEADQUARTERS: SAFT S.A.S.
ADDRESS:
26 QUAI CHARLES PASQUA
92300 LEVALLOIS-PERRET
FRANCE
PHONE/FAX: +33 1 58 63 16 00/+33 1 58 63 16 18
FACTORY: SAFT LTD.
ADDRESS:
RIVER DRIVE, TYNE & WEAR
SOUTH SHIELDS, NE33 2TR
UNITED KINGDOM
PHONE/FAX: +1 44 191 456 1451 / +1 44 191 456 6383
FACTORY: SAFT AMERICA INC.
ADDRESS:
313 CRESCENT STREET
VALDESE, NC 28690
USA
PHONE/FAX: +1 828 874 4111/+1 828 874 2431
FACTORY: SAFT POITIERS
ADDRESS:
RUE GEORGES LECLANCHE
BP 1039, 86060 POITIERS CEDEX 9
FRANCE
PHONE/FAX: +33 (0)5 49 55 48 48/+33 (0)5 49 55 48 50
1.3 EMERGENCY CONTACT:
FOR CHEMICAL EMERGENCY ONLY (IN CASE OF SPILL, LEAK, FIRE, EXPOSURE OR
ACCIDENT) CALL CHEMTREC AT:
INTERNATIONAL: +1-703-527-3887 FOR ENGLISH
WITHIN THE USA: +1-800-424-9300
| 2. HAZARD IDENTIFICATION | |
THE Li-SO2 BATTERIES DESCRIBED IN THIS BATTERY INFORMATION SHEET ARE
SEALED UNITS WHICH ARE NOT HAZARDOUS UNDER NORMAL OPERATING CONDITIONS IN
ACCORDANCE WITH MANUFACTURER'S RECOMMENDATIONS, AS STATED IN THE USER'S
MANUAL OR OTHER SIMILAR DOCUMENTATION. UNDER NORMAL USE, THE BATTERY
INTEGRITY IS MAINTAINED AND THE ACTIVE COMPONENTS IT CONTAINS ARE ISOLATED
FROM THE OUTSIDE.
IN PARTICULAR, THE BATTERY SHOULD NOT BE SUBMITTED TO ANY MECHANICAL
(OPENING, PUNCTURE, IMMERSION), THERMAL (BURNING, HEATING TO TEMPERATURES
ABOVE THE NORMAL TEMPERATURE RANGE OF THE PRODUCT) OR ELECTRICAL ABUSE
(SHORT-CIRCUIT, RECHARGE, FORCED DISCHARGE), WHICH WILL LEAD TO THE
ACTIVATION OF SAFETY VALVES AND/OR THE RUPTURE OF THE BATTERY CONTAINER.
ANY ACCIDENTAL RELEASE OF THE INNER COMPONENTS OF THE CELL, OR THEIR
COMBUSTION PRODUCTS COULD BE HIGHLY HAZARDOUS. BATTERY CONTENT EXPOSITION
TO AIR HUMIDITY/LIQUID WATER MAY BE FOLLOWED BY SEVERE BATTERY VENT/
EXPLOSION/FIRE, DEPENDING ON THE HAZARD CAUSES AND CIRCUMSTANCES.
PROTECTION FROM CHARGING:
WHENEVER LITHIUM BATTERIES ARE NOT THE SINGLE POWER SOURCE IN A CIRCUIT,
THE FOLLOWING MEASURES RECOMMENDED BY UNDERWRITERS LABORATORIES ARE
RELEVANT. THE CELLS SHOULD NOT BE CONNECTED WITH AN ELECTRICAL POWER
SOURCE THAT WOULD INCREASE THE LOAD THROUGH THE CELLS. THE ELECTRONIC
CIRCUIT SHALL INCLUDE ONE OF THE FOLLOWING:
A. TWO SUITABLE DIODES OR THE EQUIVALENT IN SERIES WITH THE CELLS TO
PREVENT ANY REVERSE (CHARGING) CURRENT. THE SECOND DIODE IS USED TO PROVIDE
PROTECTION IN THE EVENT THAT ONE WOULD FAIL. QUALITY CONTROL, OR EQUIVALENT
PROCEDURES, SHALL BE ESTABLISHED BY THE DEVICE MANUFACTURER TO CHECK THAT
THE DIODE POLARITY IS CORRECT FOR EACH UNIT.
OR
B. A BLOCKING DIODE OR THE EQUIVALENT TO PREVENT ANY REVERSE (CHARGING)
CURRENT AND A RESISTOR TO LIMIT CURRENT IN CASE OF DIODE FAILURE. THE
RESISTOR SHOULD BE SIZED TO LIMIT THE REVERSE (CHARGING) CURRENT TO THE
MAXIMUM VALUE ACCORDING TO THE DATA SHEET OF THE CELL.
| 3. COMPOSITION, INFORMATION OR INGREDIENTS | |
EACH UNIT CELL CONSISTS OF A HERMETICALLY SEALED METALLIC CAN CONTAINING A
NUMBER OF CHEMICALS AND MATERIALS OF CONSTRUCTION OF WHICH THE FOLLOWING
ARE POTENTIALLY HAZARDOUS UPON RELEASE TO AIR.
COMPONENT CAS NUMBER EINECS/ELINCS CONTENT (WT. %)*
LITHIUM METAL 7439-93-2 231-102-5 <3
SULFUR DIOXIDE 7446-09-5 231-195-2 <30
ACETONITRILE 75-05-8 200-835-2 <9
LITHIUM BROMIDE 7550-35-8 231-439-8 2.0-2.5
CARBON 1333-86-4 215-609-9 6.5-7
MILD STEEL, NICKEL, N/A N/A REMAINDER
ALUMINIUM, AND INERT
MATERIAL
* QUANTITIES MAY VARY WITH CELL MODEL
| 4. FIRST AID MEASURES | |
(NOT ANTICIPATED UNDER NORMAL USE)
4.1 ELECTROLYTE CONTACT:
EYE CONTACT:
IMMEDIATELY FLUSH WITH PLENTY OF WATER FOR AT LEAST 15 MINUTES AND GET
MEDICAL ATTENTION.
SKIN CONTACT:
REMOVE CONTAMINATED CLOTHING AND IMMEDIATELY FLUSH WITH PLENTY OF WATER
FOR AT LEAST 15 MINUTES. IN SEVERE CASES, GET MEDICAL ATTENTION.
INHALATION:
CONTENTS OF AN OPENED CELL MAY CAUSE RESPIRATORY TRACT AND MUCUS MEMBRANE
IRRITATION. REMOVE FROM EXPOSURE, REST AND KEEP WARM. IMMEDIATELY INHALE
CORTISONE SPRAY. IN SEVERE CASES, TRACK MEDICAL SURVEILLANCE FOR 48 HOURS.
INGESTION:
WASH OUT MOUTH THOROUGHLY WITH WATER AND GIVE PLENTY OF WATER TO DRINK.
GET MEDICAL ATTENTION.
FURTHER TREATMENT:
ALL CASES OF EYE CONTAMINATION, PERSISTENT SKIN IRRITATION AND CASUALTIES
WHO HAVE SWALLOWED THIS SUBSTANCE OR HAVE BREATHED ITS VAPOURS SHOULD BE
SEEN BY A DOCTOR.
4.2 LITHIUM METAL CONTACT:
EYE CONTACT:
IMMEDIATELY FLUSH WITH LARGE QUANTITIES OF WATER FOR AT LEAST 15 MINUTES,
WITH OPEN EYELIDS, AND GET MEDICAL ATTENTION.
SKIN CONTACT:
REMOVE PARTICLES OF LITHIUM FROM SKIN AS QUICK AS POSSIBLE. IMMEDIATELY
FLUSH WITH PLENTY OF WATER FOR AT LEAST 15 MINUTES AND GET MEDICAL
ATTENTION.
INHALATION/INGESTION:
CONTENTS OF AN OPENED CELL MAY CAUSE RESPIRATORY TRACT AND MUCUS MEMBRANE
IRRITATION. REMOVE FROM EXPOSURE, REST AND KEEP WARM. IMMEDIATELY INHALE
CORTISONE SPRAY. IN SEVERE CASES, TRACK MEDICAL SURVEILLANCE FOR 48 HOURS.
| 5. FIRE FIGHTING MEASURES | |
(NOT ANTICIPATED UNDER NORMAL USE)
ESTINGUISHING MEDIA:
DURING A FIRE WITH LITHIUM BATTERIES, USING LARGE AMOUNTS OF COLD WATER OR
WATER-BASED FOAM HAS SOME COOLING EFFECT AND IS EFFECTIVE TO PREVENT FIRE
EXPANSION AS LONG AS THE EXTENT OF THE FIRE HAS NOT PROGRESSED TO THE
POINT THAT THE LITHIUM METAL THEY CONTAIN IS EXPOSED (AS MARKED BY
APPEARANCE OF DEEP RED FLAMES). DO NOT USE WARM OR HOT WATER.
LITH-X CLASS D EXTINGUISHERS ARE EFFECTIVE ON FIRES INVOLVING ONLY A FEW
LITHIUM BATTERIES.
DO NOT USE CO2 OR HALON-TYPE EXTINGUISHERS.
DO NOT USE SAND, DRY POWDER OR SODA ASH, GRAPHITE POWDER OR FIRE BLANKETS.
USE ONLY CLASS D METAL EXTINGUISHERS ON RAW LITHIUM METAL.
SPECIAL FIRE FIGHTING PROCEDURES:
FIRE FIGHTERS SHOULD WEAR APPROVED/CERTIFIED POSITIVE PRESSURE
SELF-CONTAINED BREATHING APPARATUS.
FULL PROTECTIVE CLOTHING IS NECESSARY TO PREVENT POTENTIAL BODY CONTACT
WITH ELECTROLYTE SOLUTION.
DURING WATER SPRAYING, CAUTION IS ADVISED AS BURNING PIECES OF LITHIUM
MAY BE EJECTED FROM THE FIRE.
IT IS PERMISSIBLE TO USE ANY CLASS OF EXTINGUISHING MEDIUM, SPECIFIED
ABOVE, ON THESE BATTERIES OR THEIR PACKING MATERIAL. COOL EXTERIOR OF
BATTERIES IF EXPOSED TO FIRE TO PREVENT RUPTURE.
IF THE CELLS OR BATTERIES ARE NOT LOCATED AT THE CENTER OF THE FIRE,
COPIOUS AMOUNTS OF WATER MAY BE SUPPLIED USING A DIFFUSER TYPE NOZZLE SO
THAT THE CELLS REMAIN COOL DURING THE FIRE CONTAINMENT AND EXTINCTION.
A SPRINKLER SYSTEM SHOULD BE SUITABLE FOR THIS PURPOSE, THE CRITICAL
FACTOR BEING THAT THE LITHIUM CELLS DO NOT EXPERIENCE TEMPERATURES
ABOVE THE MELTING POINT OF LITHIUM (180 DEG. C).
SMALL AMOUNTS OF WATER SHOULD NEVER BE USED SUCH AS THE VOLUMES CONTAINED
WITHIN PORTABLE FIRE EXTINGUISHERS. STANDARD DRY POWDER EXTINGUISHERS ARE
INEFFECTIVE. IT SHOULD BE KEPT IN MIND THAT A HAZARD OF HYDROGEN FORMATION
EXISTS WHENEVER HOT LITHIUM METAL COMES INTO CONTACT WITH WATER.
| 6. ACCIDENTAL RELEASE MEASURES | |
(NOT ANTICIPATED UNDER NORMAL USE)
INDIVIDUAL PRECAUTIONS:
EVACUATE THE EMPLOYEES FROM AREA UNTIL FUMES DISSIPATE. IN CASE OF
ELECTROLYTE LEAKAGE FROM A CELL OR BATTERY, DO NOT INHALE VAPORS OR
TOUCH LIQUID WITH BARE HANDS. IN CASE OF SKIN OR EYE CONTACT, INHALATION
OR INGESTION, FOLLOW THE MEASURED DESCRIBED IN SECTION 12.
ENVIRONMENTAL PRECAUTION:
AVOID SEWAGE, SURFACE WATER AND UNDERGROUND WATER CONTAMINATION. AVOID
GROUND AND ATMOSPHERE CONTAMINATION.
WAYS OF CLEANING:
WITH PROTECTIVE GLASSES AND GLOVES, USE ABSORBENT MATERIAL (SAND, EARTH,
CHALK (CACO3) OR LIME (CAO) POWDER OR VERMICULITE) TO ABSORB ANY EXUDED
MATERIAL. SEAL LEAKING BATTERY (UNLESS HOT) AND CONTAMINATED ABSORBENT
MATERIAL TIGHT IN PLASTIC BAG, AND DISPOSE OF AS HAZARDOUS WASTE IN
ACCORDANCE WITH LOCAL REGULATIONS. ELECTROLYTE TRACES MAY BE WIPED OFF
DRYLY USING HOUSEHOLD PAPER. RINSE WITH WATER AFTERWARDS.
| 7. HANDLING AND STORAGE | |
IMPORTANT NOTICE:
LITHIUM-SULFUR DIOXIDE BATTERIES ARE NOT RECHARGEABLE AND SHOULD NOT BE
CHARGED OR RECHARGED. MANUFACTURER'S RECOMMENDATIONS SHOULD BE FOLLOWED
REGARDING MAXIMUM CURRENT AND OPERATING TEMPERATURE RANGE. APPLYING
PRESSURE OR DEFORMING THE BATTERY MAY LEAD TO DISASSEMBLY AND CAUSE EYE,
SKIN AND THROAT IRRITATION.
STORAGE:
STORE IN A COOL, REGULATED (PREFERABLY BELOW 30 DEG. C), DRY AND
VENTILATED AREA, AWAY FROM POSSIBLE SOURCES OF HEAT, OPEN FLAMES, FOOD AND
DRINK. AVOID EXPOSURE TO DIRECT SUNLIGHT FOR LONG PERIODS. TEMPERATURES
ABOVE 85 DEG. C MAY CAUSE LEAKAGE AND RUPTURE, AND RESULT IN SHORTENED
BATTERY SERVICE LIFE. KEEP PROPER CLEARANCE SPACE BETWEEN BATTERIES AND
WALLS. SINCE SHORT CIRCUIT CAN CAUSE BURN HAZARD, LEAKAGE OR EXPLOSION
HAZARD, KEEP BATTERIES IN ORIGINAL PACKAGING UNTIL USE AND DO NOT MIX
THEM.
HANDLING:
DO NOT OPEN THE BATTERY SYSTEM.
DO NOT CRUSH OR PIERCE THE CELLS.
DO NOT SHORT (+) OR (-) TERMINAL WITH CONDUCTORS.
DO NOT REVERSE THE POLARITY.
DO NOT SUBMIT TO EXCESSIVE MECHANICAL STRESS.
DO NOT MIX BATTERIES OF DIFFERENT TYPES OR MIX NEW AND OLD ONES TOGETHER.
DO NOT USE THE UNIT WITHOUT ITS ELECTRONIC MANAGEMENT SYSTEM.
DO NOT EXPOSE THE UNIT TO WATER OR CONDENSATION.
DO NOT DIRECTLY HEAT, SOLDER OR THROW INTO FIRE. SUCH UNSUITABLE USE CAN
CAUSE LEAKAGE OR SPOUT VAPORIZED ELECTROLYTE FUMES AND MAY CAUSE FIRE OR
EXPLOSION.
| 8. EXPOSURE CONTROLS AND PERSONAL PROTECTION* | |
(NOT ANTICIPATED UNDER NORMAL USE)
RESPIRATORY PROTECTION:
IN ALL FIRE SITUATIONS, USE SELF-CONTAINED BREATHING APPARATUS
HAND PROTECTION: IN CASE OF LEAKAGE WEAR PROTECTIVE GLOVES
EYE PROTECTION: SAFETY GLASSES ARE MANDATORY DURING HANDLING
OTHER:
IN THE EVENT OF LEAKAGE OR RUPTURED CELLS, WEAR A RUBBER APRON AND
PROTECTIVE CLOTHES.
*AFNOR PICTOGRAMS
OCCUPATIONAL EXPOSURE STANDARD:
COMPOUND 8 HOURTWA 15 MIN TWA SK
SULFUR DIOXIDE 1 PPM 1 PPM
| 9. PHYSICAL AND CHEMICAL PROPERTIES | |
THE LITHIUM-SULFUR DIOXIDE CELL OR BATTERY DESCRIBED BY THIS BATTERY
INFORMATION SHEET IS A SEALED UNIT WHEN OFFERED FOR SALE. IT IS A
MANUFACTURED "ARTICLE" AND DOES NOT EXPOSE THE USER TO HAZARDOUS
CHEMICALS WHEN USED IN ACCORDANCE WITH MANUFACTURER SPECIFICATIONS.
APPEARANCE: CYLINDRICAL SHAPE
ODOUR: IF LEAKING, GIVES OFF A PUNGENT CORROSIVE ODOUR
FLASH POINT: NOT APPLICABLE
FLAMMABILITY: NOT APPLICABLE
BOILING POINT: NOT APPLICABLE
MELTING POINT: NOT APPLICABLE
VAPOR PRESSURE: NOT APPLICABLE
VAPOR DENSITY: NOT APPLICABLE
PH: NOT APPLICABLE
SPECIFIC GRAVITY: NOT APPLICABLE
SOLUBILITY (IN WATER): NOT APPLICABLE
SOLUBILITY (OTHER): NOT APPLICABLE
| 10. STABILITY AND REACTIVITY | |
THE BATTERY SYSTEM IS STABLE WHEN HANDLED AND STORED ACCORDING TO
SECTION 4.
MATERIALS TO AVOID: OXIDIZING AGENTS, BASES, WATER.
CONDITIONS TO AVOID:
DO NOT HEAT ABOVE 85 DEG. C OR INCINERATE. DO NOT DISASSEMBLE, CRUSH,
PIERCE, SHORT, CHARGE OR RECHARGE. AVOID MECHANICAL OR ELECTRICAL ABUSE.
HAZARDOUS DECOMPOSITION PRODUCTS:
HYDROGEN (H2) AS WELL AS LITHIUM OXIDE (Li2O) AND LITHIUM HYDROXIDE
(LiOH) DUST ARE PRODUCED IN CASE OF REACTION OF LITHIUM METAL WITH
WATER (HYDROLYSIS).
SULFUR DIOXIDE (SO2) RELEASED INTO AMBIENT CONDITIONS CAN REACT WITH WATER
TO FORM SULFURIC ACID.
| 11. TOXICOLOGICAL INFORMATION | |
THERE IS NO RISK, UNLESS THE BATTERY RUPTURES. IN THE EVENT OF ACCIDENTAL
EXPOSURE TO INTERNAL CONTENTS, CORROSIVE FUMES WILL CAUSE SKIN, EYE AND
MUCOUS MEMBRANE IRRITATION. MEDICAL CONDITIONS ARE GENERALLY AGGRAVATED
BY EXPOSURE TO BATTERY INTERNAL CONTENTS: ECZEMA, SKIN ALLERGIES, LUNG
INJURIES, ASTHMA AND OTHER RESPIRATORY DISORDERS MAY OCCUR. OVEREXPOSURE
MAY CAUSE SYMPTOMS OF NON-FIBROTIC LUNG INJURY AND INGESTION CAN CAUSE
TISSUE DAMAGE TO THROAT AND GASTRO-RESPIRATORY TRACT.
| 12. ECOLOGICAL INFORMATION | |
THE BATTERIES DO NOT CONTAIN MERCURY, CADMIUM OR OTHER HEAVY METALS.
ECO-TOXICITY: NONE KNOWN IF USED/DISPOSED OF CORRECTLY.
MAMMALIAN AFFECTS: NONE KNOWN IF USED/DISPOSED OF CORRECTLY.
BIOACCUMULATION POTENTIAL: NONE KNOWN IF USED/DISPOSED OF CORRECTLY.
ENVIRONMENTAL FATE: NONE KNOWN IF USED/DISPOSED OF CORRECTLY.
| 13. DISPOSAL CONSIDERATIONS | |
BATTERIES DO NOT CONTAIN HAZARDOUS MATERIALS ACCORDING TO EC DIRECTIVES
91/157/EEC, 93/86/EEC, AND 2002/95/EC (ROHS) DIRECTIVE). BATTERY RECYCLING
IS EITHER MANDATORY OR RECOMMENDED: THE EUROPEAN DIRECTIVE 2006/66/EC HAS
BEEN IMPLEMENTED BY MOST EC MEMBER STATES.
DISPOSE OF IN ACCORDANCE WITH LOCAL LAWS AND REGULATIONS.
DO NOT INCINERATE, OR SUBJECT CELLS TO TEMPERATURES IN EXCESS OF 85 DEG. C.
SUCH ABUSE CAN RESULT IN LOSS OF SEAL, ELECTROLYTE LEAKAGE AND/OR VIOLENT
DISASSEMBLY WITH RISK OF MATERIAL PROJECTIONS.
FOR ADDITIONAL INFORMATION A TECHNICAL NOTICE IS AVAILABLE UPON REQUEST.
SEE THE SECTION ON "SUSTAINABILITY & ENVIRONMENT" ON
HTTPS://WWW.SAFTBATTERIES.COM/ABOUT-US/ENVIRONMENTAL-RESPONSIBILITY
THE RECYCLING OF BATTERIES MUST ONLY BE CONDUCTED BY FULLY TRAINED
PERSONNEL OF LICENSED RECYCLERS. ATTEMPTING TO DISMANTLE BATTERIES
OR MODULES INTO INDIVIDUAL CELLS MAY LEAD TO SERIOUS INJURIES OR
DEATH DUE TO HIGH ELECTRICAL VOLTAGE AND/OR ENERGY.
| 14. TRANSPORTATION INFORMATION | |
NOTE:
WHEN MANUFACTURING A NEW BATTERY PACK, ONE MUST ASSURE THAT IT HAS
FULFILLED THE TESTS ACCORDING TO THE UN MODEL REGULATIONS, MANUEL
OF TESTS AND CRITERIA, PART III, SUBSECTION 38.3.
14.1 UNITED NATIONS CLASS:
FOR THE SINGLE CELL BATTERIES AND MULTI-CELL BATTERY PACKS THAT ARE
NON-RESTRICTED TO TRANSPORT (NON-ASSIGNED TO THE MISCELLANEOUS CLASS 9),
USE LITHIUM BATTERIES INSIDE LABEL.
FOR THE SINGLE CELL BATTERIES AND MULTI-CELL BATTERY PACKS WHICH ARE
RESTRICTED TO TRANSPORT (ASSIGNED TO CLASS 9), USE CLASS 9 MISCELLANEOUS
DANGEROUS GOODS AND UN IDENTIFICATION NUMBER LABELS.
IN ALL CASES, REFER TO THE PRODUCT TRANSPORT CERTIFICATE ISSUED BY THE
MANUFACTURER.
UN NUMBERS:
3090:
LITHIUM METAL BATTERIES: SHIPMENT OF CELLS AND BATTERIES IN BULK
3091:
LITHIUM METAL BATTERIES CONTAINED IN EQUIPMENT OR LITHIUM METAL BATTERIES
PACKED WITH EQUIPMENT:
CELLS AND BATTERIES CONTAINED IN EQUIPMENT OR PACKED WITH IT
SHIPPING NAME: LITHIUM METAL BATTERIES
HAZARD CLASSIFICATION: 9
DEPENDING ON THEIR LITHIUM METAL CONTENT, SOME SINGLE CELLS AND
SMALL MULTI-CELL BATTERY PACKS MAY BE NON-ASSIGNED TO CLASS 9.
REFER TO TRANSPORT CERTIFICATE.
PACKAGING: GROUP II
14.2 INTERNATIONAL AGREEMENTS:
BY AIR INTERNATIONAL:
IATA/ICAO: UN 3090 OR UN3091
BY SEA INTERNATIONAL:
IMDG: UN 3090 OR UN 3091
EUROPEAN ROAD TRANSPORTATION: ADR
EUROPEAN RAIL TRANSPORTATION: RID
| 15. REGULATORY INFORMATION | |
REGULATIONS SPECIFICALLY APPLICABLE TO THE PRODUCT:
ACGIH AND OSHA:
SEE EXPOSURE LIMITS OF THE INTERNAL COMPONENTS OF THE BATTERY IN
SECTION 14.
IATA/ICAO (AIR TRANSPORTATION): UN 3090 OR UN 3091.
IMDG (SEA TRANSPORTATION): UN 3090 OR UN 3091.
TRANSPORTATION WITHIN THE US-DOT, 49 CODE OF FEDERAL REGULATIONS
UK REGULATORY REFERENCES: CLASSIFIED UNDER CHIP.
BATTERY DIRECTIVE (2006/66/EC): SEE SECTION 9
| 16. OTHER INFORMATION | |
THIS INFORMATION HAS BEEN COMPILED FROM SOURCES CONSIDERED TO BE DEPENDABLE
AND IS, TO THE BEST OF OUR KNOWLEDGE AND BELIEF, ACCURATE AND RELIABLE AS
OF THE DATE COMPILED. HOWEVER, NEITHER EXHAUSTIVELY NOR PERFECT RELIABILITY
CAN BE GRANTED. INFORMATION DOES NOT IMPLY IMPLICIT OR SPECIFIC WARRANTY OF
IT.
THIS INFORMATION RELATES TO THE SPECIFIC PRODUCTS DESIGNATED AND MAY NOT BE
VALID FOR SUCH PRODUCTS USED IN COMBINATION WITH ANY OTHER MATERIALS OR IN
ANY PROCESS. IT IS THE USER'S RESPONSIBILITY TO SATISFY HIMSELF AS TO THE
SUITABILITY AND COMPLETENESS OF THIS INFORMATION FOR HIS PARTICULAR USE.
SAFT DOES NOT ACCEPT LIABILITY FOR ANY LOSS OR DAMAGE THAT MAY OCCUR,
WHETHER DIRECT, INDIRECT, INCIDENTAL OR CONSEQUENTIAL, FROM THE USE OF THIS
BATTERY INFORMATION SHEET PROVIDED AS A SERVICE TO OUR CUSTOMERS. SAFT DOES
NOT OFFER WARRANTY AGAINST PATENT INFRINGEMENT.
SAFT
SAFT S.A.S.
26 QUAI CHARLES PASQUA,
92300 LEVALLOIS-PERRET - FRANCE
PHONE: +33 1 58 63 16 00
FAX: + 33 1 58 63 16 18
WWWW.SAFTBATTERIES.COM
DOC NO: BISO3-11-12
EDITION: FEBRUARY 2018
VERSION: 2.0
DATA IN THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE AND BECOMES
CONTRACTUAL ONLY AFTER WRITTEN CONFIRMATION.