| Common Name: | ABRASIVE PRODUCTS, 964F |
| Manufacturer: | 3M |
| SDS Revision Date: | 5/3/2017 |
| SDS Format: | GHS-US |
| Item Number(s): | 6RX78 |
| Manufacturer Model Number(s): |
SDS Table of Contents
Click the desired link below to jump directly to that section in the SDS.
3M(TM) ABRASIVE PRODUCTS, 964F
05/03/17
3M
SAFETY DATA SHEET
COPYRIGHT,2017,3M COMPANY.
ALL RIGHTS RESERVED. COPYING AND/OR DOWNLOADING OF THIS INFORMATION FOR
THE PURPOSE OF PROPERLY UTILIZING 3M PRODUCTS IS ALLOWED PROVIDED THAT:
(1) THE INFORMATION IS COPIED IN FULL WITH NO CHANGES UNLESS PRIOR WRITTEN
AGREEMENT IS OBTAINED FROM 3M, AND
(2) NEITHER THE COPY NOR THE ORIGINAL IS RESOLD OR OTHERWISE DISTRIBUTED
WITH THE INTENTION OF EARNING A PROFIT THEREON.
DOCUMENT GROUP: 23-9461-7
VERSION NUMBER: 5.00
ISSUE DATE: 05/03/17
SUPERCEDES DATE: 08/26/16
| SECTION 1: IDENTIFICATION |  |
1.1. PRODUCT IDENTIFIER: 3M(TM) ABRASIVE PRODUCTS, 964F
1.2. RECOMMENDED USE AND RESTRICTIONS ON USE:
RECOMMENDED USE: ABRASIVE PRODUCT
1.3. SUPPLIER'S DETAILS:
MANUFACTURER: 3M
DIVISION: ABRASIVE SYSTEMS DIVISION
ADDRESS:
3M CENTER
ST. PAUL, MN 55144-1000
USA
TELEPHONE: 1-888-3M HELPS (1-888-364-3577)
1.4. EMERGENCY TELEPHONE NUMBER:
1-800-364-3577 OR (651) 737-6501 (24 HOURS)
| SECTION 2: HAZARD IDENTIFICATION | |
2.1. HAZARD CLASSIFICATION:
NOT CLASSIFIED AS HAZARDOUS ACCORDING TO OSHA HAZARD COMMUNICATION
STANDARD, 29 CFR 1910.1200.
2.2. LABEL ELEMENTS:
SIGNAL WORD: NOT APPLICABLE.
SYMBOLS: NOT APPLICABLE.
PICTOGRAMS: NOT APPLICABLE.
2.3. HAZARDS NOT OTHERWISE CLASSIFIED:
32% OF THE MIXTURE CONSISTS OF INGREDIENTS OF UNKNOWN ACUTE ORAL TOXICITY.
| SECTION 3: COMPOSITION/INFORMATION ON INGREDIENTS | |
INGREDIENT C.A.S. NO. % BY WT
CERAMIC ALUMINUM OXIDE (NON-FIBROUS) 1344-28-1 20 - 50
INORGANIC FLUORIDE 15096-52-3 2 - 15
FILLER 1317-65-3 1 - 20
FILLER 13983-17-0 2 - 15
PIGMENT 1332-37-2 0.2 - 2
TITANIUM DIOXIDE 13463-67-7 0.1 - 1
QUARTZ SILICA 14808-60-7 <0.20
CURED RESIN MIXTURE 10 - 35
CLOTH BACKING MIXTURE 10 - 40
| SECTION 4: FIRST AID MEASURES | |
4.1. DESCRIPTION OF FIRST AID MEASURES:
INHALATION:
REMOVE PERSON TO FRESH AIR. IF YOU FEEL UNWELL, GET MEDICAL ATTENTION.
SKIN CONTACT:
WASH WITH SOAP AND WATER. IF SIGNS/SYMPTOMS DEVELOP, GET MEDICAL ATTENTION.
EYE CONTACT:
FLUSH WITH LARGE AMOUNTS OF WATER. REMOVE CONTACT LENSES IF EASY TO DO.
CONTINUE RINSING. IF SIGNS/SYMPTOMS PERSIST, GET MEDICAL ATTENTION.
IF SWALLOWED: NO NEED FOR FIRST AID IS ANTICIPATED.
4.2. MOST IMPORTANT SYMPTOMS AND EFFECTS, BOTH ACUTE AND DELAYED:
SEE SECTION 11.1. INFORMATION ON TOXICOLOGICAL EFFECTS.
4.3. INDICATION OF ANY IMMEDIATE MEDICAL ATTENTION AND SPECIAL TREATMENT
REQUIRED: NOT APPLICABLE
| SECTION 5: FIRE-FIGHTING MEASURES | |
5.1. SUITABLE EXTINGUISHING MEDIA:
IN CASE OF FIRE:
USE A FIRE FIGHTING AGENT SUITABLE FOR ORDINARY COMBUSTIBLE MATERIAL SUCH
AS WATER OR FOAM TO EXTINGUISH.
5.2. SPECIAL HAZARDS ARISING FROM THE SUBSTANCE OR MIXTURE:
NONE INHERENT IN THIS PRODUCT.
HAZARDOUS DECOMPOSITION OR BY-PRODUCTS:
SUBSTANCE CONDITION
CARBON MONOXIDE DURING COMBUSTION
CARBON DIOXIDE DURING COMBUSTION
5.3. SPECIAL PROTECTIVE ACTIONS FOR FIRE-FIGHTERS:
NO SPECIAL PROTECTIVE ACTIONS FOR FIRE-FIGHTERS ARE ANTICIPATED.
| SECTION 6: ACCIDENTAL RELEASE MEASURES | |
6.1. PERSONAL PRECAUTIONS, PROTECTIVE EQUIPMENT AND EMERGENCY PROCEDURES:
OBSERVE PRECAUTIONS FROM OTHER SECTIONS.
6.2. ENVIRONMENTAL PRECAUTIONS: AVOID RELEASE TO THE ENVIRONMENT.
6.3. METHODS AND MATERIAL FOR CONTAINMENT AND CLEANING UP: NOT APPLICABLE.
| SECTION 7: HANDLING AND STORAGE | |
7.1. PRECAUTIONS FOR SAFE HANDLING:
FOR INDUSTRIAL OR PROFESSIONAL USE ONLY. AVOID BREATHING OF DUST CREATED
BY SANDING, GRINDING OR MACHINING. DAMAGED PRODUCT CAN BREAK APART DURING
USE AND CAUSE SERIOUS INJURY TO FACE OR EYES. CHECK PRODUCT FOR DAMAGE
SUCH AS CRACKS OR NICKS PRIOR TO USE. REPLACE IF DAMAGED. ALWAYS WEAR EYE
AND FACE PROTECTION WHEN WORKING AT SANDING OR GRINDING OPERATIONS OR
WHEN NEAR SUCH OPERATIONS. AVOID RELEASE TO THE ENVIRONMENT. COMBUSTIBLE
DUST MAY FORM BY ACTION OF THIS PRODUCT ON ANOTHER MATERIAL (SUBSTRATE).
DUST GENERATED FROM THE SUBSTRATE DURING USE OF THIS PRODUCT MAY BE
EXPLOSIVE IF IN SUFFICIENT CONCENTRATION WITH AN IGNITION SOURCE. DUST
DEPOSITS SHOULD NOT BE ALLOWED TO ACCUMULATE ON SURFACES BECAUSE OF THE
POTENTIAL FOR SECONDARY EXPLOSIONS.
7.2. CONDITIONS FOR SAFE STORAGE INCLUDING ANY INCOMPATIBILITIES:
NO SPECIAL STORAGE REQUIREMENTS.
| SECTION 8: EXPOSURE CONTROLS/PERSONAL PROTECTION | |
8.1. CONTROL PARAMETERS:
OCCUPATIONAL EXPOSURE LIMITS:
IF A COMPONENT IS DISCLOSED IN SECTION 3 BUT DOES NOT APPEAR IN THE TABLE
BELOW, AN OCCUPATIONAL EXPOSURE LIMIT IS NOT AVAILABLE FOR THE COMPONENT.
INGREDIENT C.A.S. NO. AGENCY LIMIT TYPE ADDITIONAL
COMMENTS
FILLER 1317-65-3 OSHA TWA (AS TOTAL
DUST):
15 MG/M3
TWA (RESPIRABLE
FRACTION):
5 MG/M3
ALUMINUM, INSOLUBLE 1344-28-1 ACGIH TWA (RESPIRABLE A4:
COMPOUNDS FRACTION): NOT CLASS.
1 MG/M3 AS HUMAN
CARCIN
CERAMIC ALUMINUM 1344-28-1 OSHA TWA (AS TOTAL
OXIDE DUST): 15 MG/M3
(NON-FIBROUS)
TWA (RESPIRABLE
FRACTION):
5 MG/M3
TITANIUM DIOXIDE 13463-67-7 ACGIH TWA: 10 MG/M3 A4:
NOT CLASS.
AS HUMAN
CARCIN
TITANIUM DIOXIDE 13463-67-7 OSHA TWA (AS TOTAL
DUST): 15 MG/M3
QUARTZ SILICA 14808-60-7 ACGIH TWA (RESPIRABLE A2:
FRACTION): SUSPECTED
0.025 MG/M3 HUMAN
CARCIN.
QUARTZ SILICA 14808-60-7 OSHA TWA TABLE Z-1
(RESPIRABLE):
0.05 MG/M3
TWA TABLE Z-3
(RESPIRABLE):
0.1 MG/M3
ALUMINUM, INSOLUBLE 15096-52-3 ACGIH TWA (RESPIRABLE A4:
COMPOUNDS FRACTION): NOT CLASS.
1 MG/M3 AS HUMAN
CARCIN
FLUORIDES 15096-52-3 ACGIH TWA (AS F): A4:
2.5 MG/M3 NOT CLASS.
AS HUMAN
CARCIN
FLUORIDES 15096-52-3 OSHA TWA (AS DUST):
2.5 MG/M3
TWA (AS F):
2.5 MG/M3
ACGIH: AMERICAN CONFERENCE OF GOVERNMENTAL INDUSTRIAL HYGIENISTS
AIHA: AMERICAN INDUSTRIAL HYGIENE ASSOCIATION
CMRG: CHEMICAL MANUFACTURER'S RECOMMENDED GUIDELINES
OSHA:
UNITED STATES DEPARTMENT OF LABOR - OCCUPATIONAL SAFETY AND HEALTH
ADMINISTRATION
TWA: TIME-WEIGHTED-AVERAGE
STEL: SHORT TERM EXPOSURE LIMIT
CEIL: CEILING
8.2. EXPOSURE CONTROLS:
8.2.1. ENGINEERING CONTROLS:
PROVIDE APPROPRIATE LOCAL EXHAUST VENTILATION FOR SANDING, GRINDING OR
MACHINING. USE GENERAL DILUTION VENTILATION AND/OR LOCAL EXHAUST
VENTILATION TO CONTROL AIRBORNE EXPOSURES TO BELOW RELEVANT EXPOSURE
LIMITS AND/OR CONTROL DUST/FUME/GAS/MIST/VAPORS/SPRAY. IF VENTILATION IS
NOT ADEQUATE, USE RESPIRATORY PROTECTION EQUIPMENT. PROVIDE LOCAL EXHAUST
AT PROCESS EMISSION SOURCES TO CONTROL EXPOSURE NEAR THE SOURCE AND TO
PREVENT THE ESCAPE OF DUST INTO THE WORK AREA. ENSURE THAT DUST-HANDLING
SYSTEMS (SUCH AS EXHAUST DUCTS, DUST COLLECTORS, VESSELS, AND PROCESSING
EQUIPMENT) ARE DESIGNED IN A MANNER TO PREVENT THE ESCAPE OF DUST INTO
THE WORK AREA (I.E., THERE IS NO LEAKAGE FROM THE EQUIPMENT).
8.2.2. PERSONAL PROTECTIVE EQUIPMENT (PPE):
EYE/FACE PROTECTION:
TO MINIMIZE THE RISK OF INJURY TO FACE AND EYES, ALWAYS WEAR EYE AND FACE
PROTECTION WHEN WORKING AT SANDING OR GRINDING OPERATIONS OR WHEN NEAR
SUCH OPERATIONS.
SAFETY GLASSES WITH SIDE SHIELDS
SKIN/HAND PROTECTION:
WEAR APPROPRIATE GLOVES TO MINIMIZE RISK OF INJURY TO SKIN FROM CONTACT
WITH DUST OR PHYSICAL ABRASION FROM GRINDING OR SANDING.
RESPIRATORY PROTECTION:
ASSESS EXPOSURE CONCENTRATIONS OF ALL MATERIALS INVOLVED IN THE WORK
PROCESS. CONSIDER MATERIAL BEING ABRADED WHEN DETERMINING THE APPROPRIATE
RESPIRATORY PROTECTION. SELECT AND USE APPROPRIATE RESPIRATORS TO PREVENT
INHALATION OVEREXPOSURE.
HALF FACEPIECE OR FULL FACEPIECE AIR-PURIFYING RESPIRATOR SUITABLE FOR
PARTICULATES
FOR QUESTIONS ABOUT SUITABILITY FOR A SPECIFIC APPLICATION, CONSULT WITH
YOUR RESPIRATOR MANUFACTURER.
| SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES | |
9.1. INFORMATION ON BASIC PHYSICAL AND CHEMICAL PROPERTIES:
GENERAL PHYSICAL FORM: SOLID
ODOR, COLOR, GRADE: SOLID ABRASIVE PRODUCT
ODOR THRESHOLD: NOT APPLICABLE
PH: NOT APPLICABLE
MELTING POINT: NOT APPLICABLE
BOILING POINT: NOT APPLICABLE
FLASH POINT: NOT APPLICABLE
EVAPORATION RATE: NOT APPLICABLE
FLAMMABILITY (SOLID, GAS): NOT CLASSIFIED
FLAMMABLE LIMITS (LEL): NOT APPLICABLE
FLAMMABLE LIMITS (UEL): NOT APPLICABLE
VAPOR PRESSURE: NOT APPLICABLE
VAPOR DENSITY: NOT APPLICABLE
DENSITY: NOT APPLICABLE
SPECIFIC GRAVITY: NOT APPLICABLE
SOLUBILITY IN WATER: NOT APPLICABLE
SOLUBILITY-NON-WATER: NOT APPLICABLE
PARTITION COEFFICIENT N-OCTANOL/WATER: NOT APPLICABLE
AUTOIGNITION TEMPERATURE: NOT APPLICABLE
DECOMPOSITION TEMPERATURE: NOT APPLICABLE
VISCOSITY: NOT APPLICABLE
| SECTION 10: STABILITY AND REACTIVITY | |
10.1. REACTIVITY:
THIS MATERIAL IS CONSIDERED TO BE NON REACTIVE UNDER NORMAL USE CONDITIONS.
10.2. CHEMICAL STABILITY: STABLE.
10.3. POSSIBILITY OF HAZARDOUS REACTIONS:
HAZARDOUS POLYMERIZATION WILL NOT OCCUR.
10.4. CONDITIONS TO AVOID: NONE KNOWN.
10.5. INCOMPATIBLE MATERIALS: NONE KNOWN.
10.6. HAZARDOUS DECOMPOSITION PRODUCTS:
SUBSTANCE CONDITION
NONE KNOWN.
REFER TO SECTION 5.2 FOR HAZARDOUS DECOMPOSITION PRODUCTS DURING
COMBUSTION.
| SECTION 11: TOXICOLOGICAL INFORMATION | |
THE INFORMATION BELOW MAY NOT BE CONSISTENT WITH THE MATERIAL
CLASSIFICATION IN SECTION 2 IF SPECIFIC INGREDIENT CLASSIFICATIONS ARE
MANDATED BY A COMPETENT AUTHORITY. IN ADDITION, TOXICOLOGICAL DATA ON
INGREDIENTS MAY NOT BE REFLECTED IN THE MATERIAL CLASSIFICATION AND/OR THE
SIGNS AND SYMPTOMS OF EXPOSURE, BECAUSE AN INGREDIENT MAY BE PRESENT BELOW
THE THRESHOLD FOR LABELING, AN INGREDIENT MAY NOT BE AVAILABLE FOR
EXPOSURE, OR THE DATA MAY NOT BE RELEVANT TO THE MATERIAL AS A WHOLE.
11.1. INFORMATION ON TOXICOLOGICAL EFFECTS:
SIGNS AND SYMPTOMS OF EXPOSURE:
BASED ON TEST DATA AND/OR INFORMATION ON THE COMPONENTS, THIS MATERIAL
MAY PRODUCE THE FOLLOWING HEALTH EFFECTS:
INHALATION:
DUST FROM GRINDING, SANDING OR MACHINING MAY CAUSE IRRITATION OF THE
RESPIRATORY SYSTEM. SIGNS/SYMPTOMS MAY INCLUDE COUGH, SNEEZING, NASAL
DISCHARGE, HEADACHE, HOARSENESS, AND NOSE AND THROAT PAIN.
SKIN CONTACT:
MECHANICAL SKIN IRRITATION:
SIGNS/SYMPTOMS MAY INCLUDE ABRASION, REDNESS, PAIN, AND ITCHING.
ALLERGIC SKIN REACTION (NON-PHOTO INDUCED) IN SENSITIVE PEOPLE:
SIGNS/SYMPTOMS MAY INCLUDE REDNESS, SWELLING, BLISTERING, AND ITCHING.
EYE CONTACT:
MECHANICAL EYE IRRITATION:
SIGNS/SYMPTOMS MAY INCLUDE PAIN, REDNESS, TEARING AND CORNEAL ABRASION.
DUST CREATED BY GRINDING, SANDING, OR MACHINING MAY CAUSE EYE IRRITATION.
SIGNS/SYMPTOMS MAY INCLUDE REDNESS, SWELLING, PAIN, TEARING, AND BLURRED
OR HAZY VISION.
INGESTION: NO KNOWN HEALTH EFFECTS.
CARCINOGENICITY:
INGREDIENT CAS NO. CLASS DESCRIPTION REGULATION
SILICA, CRYS AIRRESP 14808-60-7 KNOWN HUMAN NATIONAL TOXICOLOGY
CARCINOGEN PROGRAM CARCINOGENS
QUARTZ SILICA 14808-60-7 GRP. 1: INTERNATIONAL AGENCY
CARCINOGENIC TO FOR RESEARCH ON CANCER
HUMANS
TITANIUM DIOXIDE 13463-67-7 GRP. 2B: INTERNATIONAL AGENCY
POSSIBLE HUMAN FOR RESEARCH ON CANCER
CARC.
ADDITIONAL INFORMATION:
THIS DOCUMENT COVERS ONLY THE 3M PRODUCT. FOR COMPLETE ASSESSMENT, WHEN
DETERMINING THE DEGREE OF HAZARD, THE MATERIAL BEING ABRADED MUST ALSO
BE CONSIDERED.
THIS PRODUCT CONTAINS TITANIUM DIOXIDE AND QUARTZ (CRYSTALLINE) SILICA.
CANCER OF THE LUNGS HAS BEEN ASSOCIATED WITH INHALATION OF HIGH LEVELS OF
TITANIUM DIOXIDE IN ANIMAL STUDIES, AND OCCUPATIONAL EXPOSURE TO INHALED
QUARTZ SILICA HAS BEEN ASSOCIATED WITH SILICOSIS AND LUNG CANCER. NO
EXPOSURE TO TITANIUM DIOXIDE OR QUARTZ SILICA IS EXPECTED DURING THE
NORMAL HANDLING AND USE OF THIS PRODUCT. TITANIUM DIOXIDE AND QUARTZ
SILICA WERE NOT DETECTED WHEN AIR SAMPLING WAS CONDUCTED DURING SIMULATED
USE OF SIMILAR PRODUCTS CONTAINING THESE SUBSTANCES. THEREFORE, THE HEALTH
EFFECTS ASSOCIATED WITH TITANIUM DIOXIDE AND QUARTZ (CRYSTALLINE) SILICA
ARE NOT EXPECTED DURING THE NORMAL USE OF THIS PRODUCT.
TOXICOLOGICAL DATA:
IF A COMPONENT IS DISCLOSED IN SECTION 3 BUT DOES NOT APPEAR IN A TABLE
BELOW, EITHER NO DATA ARE AVAILABLE FOR THAT ENDPOINT OR THE DATA ARE NOT
SUFFICIENT FOR CLASSIFICATION.
ACUTE TOXICITY:
NAME ROUTE SPECIES VALUE
OVERALL PRODUCT INGESTION NO DATA AVAILABLE;
CALCULATED ATE:
>5,000 MG/KG
CERAMIC ALUMINUM OXIDE DERMAL LD50:
(NON-FIBROUS) ESTIMATED TO BE
>5,000 MG/KG
CERAMIC ALUMINUM OXIDE INHALATION- RAT LC50: >2.3 MG/L
(NON-FIBROUS) DUST/MIST
(4 HOURS)
CERAMIC ALUMINUM OXIDE INGESTION RAT LD50: >5,000 MG/KG
(NON-FIBROUS)
FILLER DERMAL RAT LD50: >2,000 MG/KG
FILLER INHALATION- RAT LC50: 3 MG/L
DUST/MIST
(4 HOURS)
FILLER INGESTION RAT LD50: 6,450 MG/KG
INORGANIC FLUORIDE DERMAL RABBIT LD50: >2,100 MG/KG
INORGANIC FLUORIDE INHALATION- RAT LC50: 4.5 MG/L
DUST/MIST
(4 HOURS)
INORGANIC FLUORIDE INGESTION RAT LD50: 5,000 MG/KG
FILLER DERMAL LD50:
ESTIMATED TO BE
>5,000 MG/KG
FILLER INGESTION LD50:
ESTIMATED TO BE
2,000 - 5,000 MG/KG
PIGMENT DERMAL NOT LD50: 3,100 MG/KG
AVAILABLE
PIGMENT INGESTION NOT LD50: 3,700 MG/KG
AVAILABLE
TITANIUM DIOXIDE DERMAL RABBIT LD50: >10,000 MG/KG
TITANIUM DIOXIDE INHALATION- RAT LC50: >6.82 MG/L
DUST/MIST
(4 HOURS)
TITANIUM DIOXIDE INGESTION RAT LD50: >10,000 MG/KG
QUARTZ SILICA DERMAL LD50:
ESTIMATED TO BE
>5,000 MG/KG
QUARTZ SILICA INGESTION LD50:
ESTIMATED TO BE
>5,000 MG/KG
ATE = ACUTE TOXICITY ESTIMATE
SKIN CORROSION/IRRITATION:
NAME SPECIES VALUE
CERAMIC ALUMINUM OXIDE RABBIT NO SIGNIFICANT IRRITATION
(NON-FIBROUS)
FILLER RABBIT NO SIGNIFICANT IRRITATION
INORGANIC FLUORIDE MULTIPLE NO SIGNIFICANT IRRITATION
ANIMAL
SPECIES
PIGMENT RABBIT NO SIGNIFICANT IRRITATION
TITANIUM DIOXIDE RABBIT NO SIGNIFICANT IRRITATION
QUARTZ SILICA PROFESSIONAL NO SIGNIFICANT IRRITATION
JUDGEMENT
SERIOUS EYE DAMAGE/IRRITATION:
NAME SPECIES VALUE
CERAMIC ALUMINUM OXIDE RABBIT NO SIGNIFICANT IRRITATION
(NON-FIBROUS)
FILLER RABBIT NO SIGNIFICANT IRRITATION
INORGANIC FLUORIDE RABBIT MILD IRRITANT
PIGMENT RABBIT NO SIGNIFICANT IRRITATION
TITANIUM DIOXIDE RABBIT NO SIGNIFICANT IRRITATION
SKIN SENSITIZATION:
NAME SPECIES VALUE
PIGMENT HUMAN NOT CLASSIFIED
TITANIUM DIOXIDE HUMAN AND NOT CLASSIFIED
ANIMAL
RESPIRATORY SENSITIZATION:
FOR THE COMPONENT/COMPONENTS, EITHER NO DATA ARE CURRENTLY AVAILABLE OR
THE DATA ARE NOT SUFFICIENT FOR CLASSIFICATION.
GERM CELL MUTAGENICITY:
NAME ROUTE VALUE
CERAMIC ALUMINUM OXIDE IN VITRO NOT MUTAGENIC
(NON-FIBROUS)
FILLER IN VITRO NOT MUTAGENIC
PIGMENT IN VITRO NOT MUTAGENIC
TITANIUM DIOXIDE IN VITRO NOT MUTAGENIC
TITANIUM DIOXIDE IN VIVO NOT MUTAGENIC
QUARTZ SILICA IN VITRO SOME POSITIVE DATA EXIST, BUT
THE DATA ARE NOT SUFFICIENT
FOR CLASSIFICATION
QUARTZ SILICA IN VIVO SOME POSITIVE DATA EXIST, BUT
THE DATA ARE NOT SUFFICIENT
FOR CLASSIFICATION
CARCINOGENICITY:
NAME ROUTE SPECIES VALUE
CERAMIC ALUMINUM OXIDE INHALATION RAT NOT CARCINOGENIC
(NON-FIBROUS)
PIGMENT INHALATION HUMAN SOME POSITIVE DATA
EXIST, BUT THE DATA
ARE NOT SUFFICIENT
FOR CLASSIFICATION
TITANIUM DIOXIDE INGESTION MULTIPLE NOT CARCINOGENIC
ANIMAL
SPECIES
TITANIUM DIOXIDE INHALATION RAT CARCINOGENIC
QUARTZ SILICA INHALATION HUMAN AND CARCINOGENIC
ANIMAL
REPRODUCTIVE TOXICITY:
REPRODUCTIVE AND/OR DEVELOPMENTAL EFFECTS:
NAME ROUTE VALUE
FILLER INGESTION NOT CLASSIFIED FOR DEVELOPMENT
NAME SPECIES TEST RESULT EXPOSURE DURATION
FILLER RAT NOAEL: 625 MG/KG/DAY PREMATING & DURING GESTATION
TARGET ORGAN(S):
SPECIFIC TARGET ORGAN TOXICITY - SINGLE EXPOSURE:
NAME ROUTE TARGET ORGAN(S) VALUE
FILLER INHALATION RESPIRATORY SYSTEM NOT CLASSIFIED
NAME SPECIES TEST RESULT EXPOSURE DURATION
FILLER RAT NOAEL: 0.812 MG/L 90 MINUTES
SPECIFIC TARGET ORGAN TOXICITY - REPEATED EXPOSURE:
NAME ROUTE TARGET ORGAN(S) VALUE
CERAMIC ALUMINUM OXIDE INHALATION PNEUMOCONIOSIS SOME POSITIVE DATA
(NON-FIBROUS) EXIST, BUT THE DATA
ARE NOT SUFFICIENT
FOR CLASSIFICATION
CERAMIC ALUMINUM OXIDE INHALATION PULMONARY NOT CLASSIFIED
(NON-FIBROUS) FIBROSIS
FILLER INHALATION RESPIRATORY NOT CLASSIFIED
SYSTEM
INORGANIC FLUORIDE INHALATION BONE, TEETH, CAUSES DAMAGE TO
NAILS, AND/OR ORGANS THROUGH
HAIR PROLONGED OR
REPEATED EXPOSURE
INORGANIC FLUORIDE INHALATION RESPIRATORY CAUSES DAMAGE TO
SYSTEM ORGANS THROUGH
PROLONGED OR
REPEATED EXPOSURE
INORGANIC FLUORIDE INGESTION BONE, TEETH, CAUSES DAMAGE TO
NAILS, AND/OR ORGANS THROUGH
HAIR PROLONGED OR
REPEATED EXPOSURE
FILLER INHALATION RESPIRATORY NOT CLASSIFIED
SYSTEM
FILLER INHALATION PULMONARY NOT CLASSIFIED
FIBROSIS
PIGMENT INHALATION PULMONARY NOT CLASSIFIED
FIBROSIS
PNEUMOCONIOSIS
TITANIUM DIOXIDE INHALATION RESPIRATORY SOME POSITIVE DATA
SYSTEM EXIST, BUT THE DATA
ARE NOT SUFFICIENT
FOR CLASSIFICATION
TITANIUM DIOXIDE INHALATION PULMONARY NOT CLASSIFIED
FIBROSIS
QUARTZ SILICA INHALATION SILICOSIS CAUSES DAMAGE TO
ORGANS THROUGH
PROLONGED OR
REPEATED EXPOSURE
NAME SPECIES TEST RESULT EXPOSURE DURATION
CERAMIC ALUMINUM OXIDE HUMAN NOAEL: OCCUPATIONAL
(NON-FIBROUS) NOT AVAILABLE EXPOSURE
CERAMIC ALUMINUM OXIDE HUMAN NOAEL: OCCUPATIONAL
(NON-FIBROUS) NOT AVAILABLE EXPOSURE
FILLER HUMAN NOAEL: OCCUPATIONAL
NOT AVAILABLE EXPOSURE
INORGANIC FLUORIDE RAT NOAEL: 5 MONTHS
0.0005 MG/L
INORGANIC FLUORIDE RAT NOAEL: 90 DAYS
0.00021 MG/L
INORGANIC FLUORIDE RAT LOAEL: 14 WEEKS
0.58 MG/KG/DAY
FILLER HUMAN NOAEL: OCCUPATIONAL
NOT AVAILABLE EXPOSURE
FILLER HUMAN NOAEL:
AND NOT AVAILABLE
ANIMAL
PIGMENT HUMAN NOAEL: OCCUPATIONAL
NOT AVAILABLE EXPOSURE
TITANIUM DIOXIDE RAT LOAEL: 2 YEARS
0.01 MG/L
TITANIUM DIOXIDE HUMAN NOAEL: OCCUPATIONAL
NOT AVAILABLE EXPOSURE
QUARTZ SILICA HUMAN NOAEL: OCCUPATIONAL
NOT AVAILABLE EXPOSURE
ASPIRATION HAZARD:
FOR THE COMPONENT/COMPONENTS, EITHER NO DATA ARE CURRENTLY AVAILABLE OR
THE DATA ARE NOT SUFFICIENT FOR CLASSIFICATION.
PLEASE CONTACT THE ADDRESS OR PHONE NUMBER LISTED IN SECTION 1 OF THIS
SDS FOR ADDITIONAL TOXICOLOGICAL INFORMATION ON THIS MATERIAL AND/OR
ITS COMPONENTS.
| SECTION 12: ECOLOGICAL INFORMATION | |
ECOTOXICOLOGICAL INFORMATION:
PLEASE CONTACT THE ADDRESS OR PHONE NUMBER LISTED IN SECTION 1 OF THIS
SDS FOR ADDITIONAL ECOTOXICOLOGICAL INFORMATION ON THIS MATERIAL
AND/OR ITS COMPONENTS.
CHEMICAL FATE INFORMATION:
PLEASE CONTACT THE ADDRESS OR PHONE NUMBER LISTED IN SECTION 1 OF THIS
SDS FOR ADDITIONAL CHEMICAL FATE INFORMATION ON THIS MATERIAL AND/OR
ITS COMPONENTS.
| SECTION 13: DISPOSAL CONSIDERATIONS | |
13.1. DISPOSAL METHODS:
DISPOSE OF CONTENTS/CONTAINER IN ACCORDANCE WITH THE
LOCAL/REGIONAL/NATIONAL/INTERNATIONAL REGULATIONS.
THE SUBSTRATE THAT WAS ABRADED MUST BE CONSIDERED AS A FACTOR IN THE
DISPOSAL METHOD FOR THIS PRODUCT. INCINERATE IN A PERMITTED WASTE
INCINERATION FACILITY. PROPER DESTRUCTION MAY REQUIRE THE USE OF
ADDITIONAL FUEL DURING INCINERATION PROCESSES. AS A DISPOSAL ALTERNATIVE,
UTILIZE AN ACCEPTABLE PERMITTED WASTE DISPOSAL FACILITY.
EPA HAZARDOUS WASTE NUMBER (RCRA): NOT REGULATED
| SECTION 14: TRANSPORT INFORMATION | |
NOT REGULATED PER U.S. DOT, IATA OR IMO.
THESE TRANSPORTATION CLASSIFICATIONS ARE PROVIDED AS A CUSTOMER SERVICE.
AS THE SHIPPER YOU REMAIN RESPONSIBLE FOR COMPLYING WITH ALL APPLICABLE
LAWS AND REGULATIONS, INCLUDING PROPER TRANSPORTATION CLASSIFICATION AND
PACKAGING. 3M TRANSPORTATION CLASSIFICATIONS ARE BASED ON PRODUCT
FORMULATION, PACKAGING, 3M POLICIES AND 3M UNDERSTANDING OF APPLICABLE
CURRENT REGULATIONS. 3M DOES NOT GUARANTEE THE ACCURACY OF THIS
CLASSIFICATION INFORMATION. THIS INFORMATION APPLIES ONLY TO TRANSPORTATION
CLASSIFICATION AND NOT THE PACKAGING, LABELING, OR MARKING REQUIREMENTS.
THE ORIGINAL 3M PACKAGE IS CERTIFIED FOR U.S. GROUND SHIPMENT ONLY. IF
YOU ARE SHIPPING BY AIR OR OCEAN, THE PACKAGE MAY NOT MEET APPLICABLE
REGULATORY REQUIREMENTS.
| SECTION 15: REGULATORY INFORMATION | |
15.1. US FEDERAL REGULATIONS: CONTACT 3M FOR MORE INFORMATION.
311/312 HAZARD CATEGORIES:
FIRE HAZARD: NO
PRESSURE HAZARD: NO
REACTIVITY HAZARD: NO
IMMEDIATE HAZARD: NO
DELAYED HAZARD: NO
EPCRA 311/312 HAZARD CLASSIFICATIONS (EFFECTIVE JANUARY 1, 2018):
PHYSICAL HAZARDS: NOT APPLICABLE
HEALTH HAZARDS: NOT APPLICABLE
15.2. STATE REGULATIONS: CONTACT 3M FOR MORE INFORMATION.
15.3. CHEMICAL INVENTORIES:
THIS PRODUCT IS AN ARTICLE AS DEFINED BY TSCA REGULATIONS, AND IS EXEMPT
FROM TSCA INVENTORY LISTING REQUIREMENTS.
CONTACT 3M FOR MORE INFORMATION.
15.4. INTERNATIONAL REGULATIONS: CONTACT 3M FOR MORE INFORMATION.
THIS SDS HAS BEEN PREPARED TO MEET THE U.S. OSHA HAZARD COMMUNICATION
STANDARD, 29 CFR 1910.1200.
| SECTION 16: OTHER INFORMATION | |
NFPA HAZARD CLASSIFICATION:
HEALTH 0
FLAMMABILITY 1
INSTABILITY 0
SPECIAL HAZARDS NONE
NATIONAL FIRE PROTECTION ASSOCIATION (NFPA) HAZARD RATINGS ARE DESIGNED
FOR USE BY EMERGENCY RESPONSE PERSONNEL TO ADDRESS THE HAZARDS THAT ARE
PRESENTED BY SHORT-TERM, ACUTE EXPOSURE TO A MATERIAL UNDER CONDITIONS OF
FIRE, SPILL, OR SIMILAR EMERGENCIES. HAZARD RATINGS ARE PRIMARILY BASED
ON THE INHERENT PHYSICAL AND TOXIC PROPERTIES OF THE MATERIAL BUT ALSO
INCLUDE THE TOXIC PROPERTIES OF COMBUSTION OR DECOMPOSITION PRODUCTS THAT
ARE KNOWN TO BE GENERATED IN SIGNIFICANT QUANTITIES.
HMIS HAZARD CLASSIFICATION:
HEALTH 0
FLAMMABILITY 1
PHYSICAL HAZARD 0
PERSONAL PROTECTION X - SEE PPE SECTION.
HAZARDOUS MATERIAL IDENTIFICATION SYSTEM (HMIS(R*) IV) HAZARD RATINGS ARE
DESIGNED TO INFORM EMPLOYEES OF CHEMICAL HAZARDS IN THE WORKPLACE. THESE
RATINGS ARE BASED ON THE INHERENT PROPERTIES OF THE MATERIAL UNDER
EXPECTED CONDITIONS OF NORMAL USE AND ARE NOT INTENDED FOR USE IN EMERGENCY
SITUATIONS. HMIS(R*) IV RATINGS ARE TO BE USED WITH A FULLY IMPLEMENTED
HMIS(R*) IV PROGRAM. HMIS(R*) IS A REGISTERED MARK OF THE AMERICAN COATINGS
ASSOCIATION (ACA).
DOCUMENT GROUP: 23-9461-7
VERSION NUMBER: 5.00
ISSUE DATE: 05/03/17
SUPERCEDES DATE: 08/26/16
DISCLAIMER:
THE INFORMATION IN THIS SAFETY DATA SHEET (SDS) IS BELIEVED TO BE CORRECT
AS OF THE DATE ISSUED. 3M MAKES NO WARRANTIES, EXPRESSED OR IMPLIED,
INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY
OR FITNESS FOR A PARTICULAR PURPOSE OR COURSE OF PERFORMANCE OR USAGE OF
TRADE. USER IS RESPONSIBLE FOR DETERMINING WHETHER THE 3M PRODUCT IS FIT
FOR A PARTICULAR PURPOSE AND SUITABLE FOR USER'S METHOD OF USE OR
APPLICATION. GIVEN THE VARIETY OF FACTORS THAT CAN AFFECT THE USE AND
APPLICATION OF A 3M PRODUCT, SOME OF WHICH ARE UNIQUELY WITHIN THE USER'S
KNOWLEDGE AND CONTROL, IT IS ESSENTIAL THAT THE USER EVALUATE THE 3M
PRODUCT TO DETERMINE WHETHER IT IS FIT FOR A PARTICULAR PURPOSE AND
SUITABLE FOR USER'S METHOD OF USE OR APPLICATION.
3M PROVIDES INFORMATION IN ELECTRONIC FORM AS A SERVICE TO ITS CUSTOMERS.
DUE TO THE REMOTE POSSIBILITY THAT ELECTRONIC TRANSFER MAY HAVE RESULTED
IN ERRORS, OMISSIONS OR ALTERATIONS IN THIS INFORMATION, 3M MAKES NO
REPRESENTATIONS AS TO ITS COMPLETENESS OR ACCURACY. IN ADDITION,
INFORMATION OBTAINED FROM A DATABASE MAY NOT BE AS CURRENT AS THE
INFORMATION IN THE SDS AVAILABLE DIRECTLY FROM 3M
3M USA SDSS ARE AVAILABLE AT WWW.3M.COM