| Common Name: | ARMEX BLASTING MEDIA |
| Manufacturer: | AGSCO |
| SDS Revision Date: | 11/1/2017 |
| SDS Format: | GHS-EU |
| Item Number(s): | 6YY30, 6YY31 |
| Manufacturer Model Number(s): |
SDS Table of Contents
Click the desired link below to jump directly to that section in the SDS.
SAFETY DATA SHEET
PRODUCT NAME: ARMEX(R*) BLASTING MEDIA
PRODUCT DESCRIPTION: SODIUM HYDROGEN CARBONATE, SODIUM BICARBONATE
| 1. IDENTIFICATION OF THE MIXTURE AND OF THE COMPANY |  |
1.1 PRODUCT IDENTIFICATION: ARMEX(R*) BLAST MEDIA
FLOW FORMULA M, FLOW FORMULA XL, HYDROFLEX FORMULA XL, MAINTENANCE FORMULA,
MAINTENANCE FORMULA WITH SUPRAKLEEN, MAINTENANCE FORMULA XL, MAINTENANCE
FORMULA XL WITH SUPRAKLEEN
1.2 RELEVANT ESTABLISHED USE OF THE MIXTURE:
THESE PRODUCTS ARE USED AS THE BLAST MEDIA IN PRESSURIZED BLAST CLEANING
EQUIPMENT SPECIALLY DESIGNED FOR HANDLING THIS MEDIA.
1.3 OTHER MEANS OF IDENTIFICATION:
1.4 INFORMATION ABOUT THE SUPPLIER OF THE SAFETY DATA SHEET:
AGSCO CORPORATION
160 WEST HINTZ ROAD
WHEELING ILLINOIS 60090
EMERGENCY NUMBER: 847-520-4455
INFORMATION NUMBER: 847-520-4455
DATE PREPARED: NOVEMBER 2017
| 2. HAZARDS IDENTIFICATION | |
CLASSIFICATION OF THE PREPARATION ACCORDING TO THE CLASSIFICATION CRITERIA
ESTABLISHED BY DIRECTIVES 67/548/EEC AND 1999/45/EC:
2.1 CLASSIFICATION OF THE SUBSTANCE OR MIXTURE:
THE PRODUCT IS NOT CLASSIFIED AS DANGEROUS AND SHOULD NOT PRESENT A HAZARD
IN NORMAL PROFESSIONAL INDUSTRIAL USAGE. STATIC SPARKS MAY BE GENERATED
DURING THE BLASTING OPERATION. SPECIAL CONSIDERATION SHOULD BE GIVEN TO
WORK AREAS AND APPLICATIONS IN WHICH FLAMMABLE OR COMBUSTIBLE VAPORS,
MISTS, GASSES OR CLOUDS OF COMBUSTIBLE DUST ARE EITHER PRESENT OR MAY BE
RELEASED. SEE SECTION 8 AND PRODUCT STATIC ELECTRICITY HAZARD INFORMATION
BULLETIN FOR MORE INFORMATION.
| 3. COMPOSITION/INFORMATION ON INGREDIENTS | |
3.1 MIXTURE:
MIXTURE CONTAINING SODIUM BICARBONATE. THERE ARE NO INGREDIENTS OR
ADDITIONAL INGREDIENTS PRESENT WHICH, WITHIN CURRENT KNOWLEDGE OF THE
SUPPLIER AND IN CONCENTRATIONS APPLICABLE, ARE CLASSIFIED AS HAZARDOUS
TO HUMAN HEALTH OR THE ENVIRONMENT AND HENCE REQUIRE REPORTING IN THIS
SECTION.
3.2 DANGEROUS SUBSTANCES TO HEALTH, PURSUANT TO DIRECTIVE 67/548/EEC AND
CLP REGULATION 1272/2008 (SUBSEQUENT AMENDMENTS) OR FOR WHICH THERE ARE
ACKNOWLEDGED EXPOSURE LIMITS. INDICATION OF THE CONCENTRATION OR
CONCENTRATION RANGE AND ITS CLASSIFICATION.
SODIUM HYDROGEN CARBONATE:
EC NUMBER: 205-633-88
CAS NUMBER: 144-55-8
CONCENTRATION: >90%
| 4. FIRST AID MEASURES | |
4.1 IN CASE OF INHALATION:
REMOVE THE INJURED PERSON FROM THE POLLUTED AREA FOR HIM/HER TO BREATHE
FRESH CLEAN AIR. SEEK MEDICAL ATTENTION IF SYMPTOMS ARE EVIDENT.
4.2 IN CASE OF SKIN CONTACT:
PREVENT JETS OF PRODUCT FROM AFFECTING THE OPERATOR, IN CASE OF SKIN
CONTACT, WASH OUT THE CONTAMINATED PART WITH WATER. SEEK MEDICAL ATTENTION
IF IRRITATION PERSISTS. REMOVE WET/CONTAMINATED CLOTHING.
4.3 IN CASE OF EYE CONTACT:
AVOID OPERATOR EYE CONTACT WITH JETS OF PRODUCT. WEAR THE APPROPRIATE PPE.
IN CASE OF EYE CONTACT, IMMEDIATELY IRRIGATE THE EYE WITH COPIOUS
QUANTITIES OF WATER. SEEK MEDICAL ATTENTION IF IRRITATION PERSISTS.
4.4 IN CASE OF INGESTION:
DO NOT INDUCE VOMITING. FOR INGESTION OF SMALL QUANTITIES OF PRODUCT:
WASH OUT THE MOUTH WITH WATER AND DRINK 200 - 300 ML OF WARM WATER. SEEK
MEDICAL ATTENTION. FOR INGESTION OF LARGE QUANTITIES OF PRODUCT,
IMMEDIATELY SEEK MEDICAL ATTENTION.
4.5 OTHER INFORMATION:
INFORMATION FOR THE DOCTOR: SYMPTOMATIC TREATMENT.
| 5. FIRE FIGHTING MEASURES | |
5.1 SUITABLE EXTINGUISHING MEDIA:
CHEMICAL DUST, WATER SPRAY. USE EXTINGUISHING MEDIA APPROPRIATE TO THE
SURROUNDING FIRE CONDITION.
5.2 SPECIAL HAZARDS RESULTING FROM THE SUBSTANCE OR MIXTURE:
INVOLVEMENT OF LARGE QUANTITIES OF PRODUCT IN A FIRE CAN PRODUCE
CONSIDERABLE LEVELS OF CARBON DIOXIDE (CO2), MAKING IT NECESSARY TO WEAR
POSITIVE PRESSURE SELF-CONTAINED BREATHING APPARATUS. CO2 IS ASPHYXIATING
AT LEVELS IN EXCESS OF 5%.
THERMAL BREAKDOWN (AT TEMPERATURES OVER 190 DEG. C) CAN PRODUCE SODIUM
CARBONATE (SODA ASH) THAT IS AN IRRITANT FOR THE AIRWAYS AND FOR THE SKIN.
5.3 RECOMMENDATIONS FOR FIREFIGHTERS:
PROTECT THE AIRWAYS WITH A FACIAL MASK FITTED WITH A UNIVERSAL FILTER
(ENSURE THAT MASKS ARE CERTIFIED AND INTACT). WEAR A SUITABLE POSITIVE
PRESSURE SELF-CONTAINED BREATHING APPARATUS AND ALL THE NECESSARY EQUIPMENT
IN CASE OF A LARGE FIRE.
| 6. ACCIDENTAL RELEASE MEASURES | |
6.1 PERSONAL PRECAUTIONS PROTECTION DEVICES AND PROCEDURES IN CASE OF
SPILLS OR RELEASE:
WEAR ADEQUATE PROTECTIVE GEAR. DO NOT SMOKE. AVOID INHALING FUMES, MISTS
OR FOGS. REMOVE OUTSIDE PERSONNEL FROM THE SITE.
6.2 ENVIRONMENTAL PRECAUTIONS:
IN CASE OF LOSS OF SMALL QUANTITIES OF PRODUCT:
COLLECT IT (SINCE IT IS SOLID) AND WASH THE CONTAMINATED SURFACE WITH
WATER. IN THE EVENT OF LARGE SPILLAGES, CONTAIN AND DAM THE SPILLAGE,
PREVENT THE PRODUCT FROM CONTAMINATING SOIL AND WATER. DISPOSE OF THE
PRODUCT IN COMPLIANCE WITH CURRENT STANDARDS. THE PRODUCT CAN CAUSE DAMAGE
TO THE VEGETATION AS A RESULT OF PROLONGED EXPOSURE. ORNAMENTAL PLANTS,
SHRUBS AND TREES CAN BE DAMAGED.
6.3 METHODS AND MATERIALS FOR CONTAINMENT AND CLEANING UP:
DAM THE SPILLAGE WITH EARTH, SAND OR OTHER INERT MATERIAL.
| 7. HANDLING AND STORAGE | |
7.1 PRECAUTIONS FOR SAFE HANDLING:
STORE IN THE ORIGINAL CONTAINERS. THE USUAL GOOD STANDARDS OF INDUSTRIAL
HYGIENE SHOULD BE MAINTAINED. AVOID THE FORMATION AND DISPERSION OF DUST.
STATIC SPARKS MAY BE GENERATED DURING THE BLASTING OPERATION. SPECIAL
CONSIDERATION SHOULD BE GIVEN TO WORK AREAS AND APPLICATIONS IN WHICH
FLAMMABLE OR COMBUSTIBLE VAPORS, MISTS, GASSES OR CLOUDS OF COMBUSTIBLE
DUST ARE EITHER PRESENT OR MAY BE RELEASED. SEE SECTION 8 AND PRODUCT
STATIC ELECTRICITY HAZARD INFORMATION BULLETIN FOR MORE INFORMATION.
7.2 CONDITIONS FOR SAFE STORAGE, INCLUDING INCOMPATIBILITIES, IF ANY:
LOCATION: STORE IN A COOL DRY WAREHOUSE. KEEP AWAY FROM ACIDS.
CONDITIONS: MAXIMUM 30 DEG. C
STORAGE: 12 MONTHS IN THE WAREHOUSE.
7.3 SPECIFIC FINAL USES:
THE PRODUCT IS DESIGNED TO BE USED AS MEDIUM IN A PRESSURIZED BLAST
CLEANING MACHINES.
| 8. EXPOSURE CONTROLS/PERSONAL PROTECTION | |
8.1 CONTROL PARAMETERS: WORKPLACE EXPOSURE LIMITS.
8.2 EXPOSURE CONTROLS:
SODIUM HYDROGEN CARBONATE (POWDER):
TWA (8 HOURS): 5 MG/M3 (INHALABLE DUST)
FOR PARTICLES NOT OTHERWISE CLASSIFIED (PNOC) - TLV-TWA OF 10 MG/M3
AS A NUISANCE DUST (ACGIH).
8.2.1 (A) HEARING PROTECTION:
WEAR ADEQUATE EAR GUARDS WHEN USING SPRAYING DEVICES (>80DBA).
8.2.1 (B) RESPIRATORY PROTECTION:
AVOID DISPERSION OF DUST. ENSURE GOOD VENTILATION IN THE WORKPLACE.
WEAR POSITIVE PRESSURE SELF-CONTAINED BREATHING APPARATUS IN CASE OF FIRE.
ARMEX MEDIA ALONE DOES NOT REPRESENT AN INHALATION HAZARD TO THE USER.
HOWEVER, THE USE OF THESE MEDIA IN ARMEX CLEANING AND COATING REMOVAL
SYSTEMS PRESENTS USE-SPECIFIC EXPOSURE POTENTIALS BASED ON THE PARTICULAR
SYSTEM AND BLASTING CONDITIONS EMPLOYED, AND THE CHARACTERISTICS OF THE
COATING BEING REMOVED.
ABRASIVE BLASTING:
A NIOSH/FFP2 APPROVED RESPIRATOR WITH A DUST FILTER MAY BE PERMISSIBLE
UNDER CERTAIN CIRCUMSTANCES WHERE AIRBORNE CONCENTRATIONS ARE EXPECTED TO
EXCEED EXPOSURE LIMITS FOR GENERAL EXPOSURE TO ARMEX DUSTS ABOVE THE
ESTABLISHED EXPOSURE GUIDELINE, AND FOR OUTDOOR BLASTING OF NON-HAZARDOUS
COATINGS. USE AN ABRASIVE BLASTING RESPIRATOR FOR INDOOR OR ENCLOSED WORK,
AND WHENEVER BLASTING HAZARDOUS COATINGS. WHENEVER POSSIBLE, USE
APPROPRIATE ENGINEERING CONTROLS AND/OR CONTAINMENT MEASURES DURING
ABRASIVE BLASTING TO MINIMIZE EXPOSURE TO AIRBORNE DUSTS.
SOLUBLE MEDIA INJECTOR/POWER WASHING:
RESPIRATORY PROTECTION IS NOT (CONTINUED) NORMALLY REQUIRED SINCE THE
MEDIA IS SOLUBILIZED AND DUSTS ARE NOT TYPICALLY GENERATED DURING THIS
PROCESS. CONDITIONS WHERE RESPIRATORY PROTECTION WOULD BE REQUIRED INCLUDE
WORKER EXPOSURE TO EXCESSIVE MISTS, WORK INVOLVING THE REMOVAL OF HAZARDOUS
OR POTENTIALLY HAZARDOUS COATINGS, OR WHEN WORKING IN A CONFINED SPACE OR
AREA WITH LIMITED VENTILATION. WHEN IT IS DETERMINED THAT RESPIRATORY
PROTECTION IS REQUIRED FOR CERTAIN OPERATIONS, USE AN APPROVED
AIR-PURIFYING OR AIR-SUPPLIED RESPIRATOR AS APPROPRIATE.
8.2.1 (C) HAND PROTECTION:
UNI EN 420: 2010 - GENERAL REQUIREMENTS FOR GLOVES.
UNI EN 374-1/2/3:
2004 - PROTECTIVE GLOVES AGAINST CHEMICALS AND MICRO-ORGANISMS
GENERAL PURPOSE FOR HANDLING DRY PRODUCT OR HEAVY GAUGE WHEN DRY BLASTING.
IMPERVIOUS (PREFERABLY HEAVY RUBBER) WHEN WET BLASTING.
8.2.1 (D) EYE PROTECTION:
UNI 10912:
2000 - PERSONAL PROTECTIVE EQUIPMENT-GUIDE TO SELECTION, USE AND
MAINTENANCE OF OCCUPATIONAL EYE AND FACE PROTECTORS.
UNI EN 166:
2004 - PERSONAL EYE PROTECTION:
SPECIFICATIONS SAFETY GOGGLES MUST BE WORN. DO NOT WEAR CONTACT LENSES.
WEAR SAFETY GOGGLES OR FACE SHIELD DURING ABRASIVE BLASTING OPERATIONS.
8.2.1 (E) SKIN PROTECTION:
UNI EN 340:
2004 - PROTECTIVE CLOTHING:
GENERAL REQUIREMENTS. OVERALLS MUST BE WORN. FULL COVER CLOTHING IS
SUFFICIENT FOR GENERAL HANDLING. APRONS OR IMPERVIOUS COVER FOR BLASTING
OPERATIONS.
8.2.2 ENVIRONMENTAL EXPOSURE CONTROLS:
NO SPECIAL CONSTRAINTS. PREVENT CONTAMINATION OF WATER AND SOIL. NO SPECIAL
REQUIREMENTS WITH RESPECT TO CHEMICAL EXPOSURE OTHER THAN THOSE NOTED
ABOVE. HOWEVER, WHEN USED IN BLASTING, WORKERS MUST ADHERE TO GOOD
OPERATING PROCEDURES DESIGNED TO PREVENT PHYSICAL CONTACT WITH PRESSURIZED
STREAMS OF ARMEX(R*) BLAST MEDIA AND SURFACE COATINGS BEING REMOVED. SEE
OPERATING INSTRUCTIONS FOR BLASTING EQUIPMENT. TO MINIMIZE STATIC
ELECTRICITY HAZARDS, PROPERLY GROUND THE EQUIPMENT AND WORK PIECE, USE A
CONDUCTIVE NOZZLE, AND WET BLAST WHENEVER POSSIBLE. CONDUCT THE BLASTING
OPERATION IN NON-HAZARDOUS AREAS IF POSSIBLE.
| 9. PHYSICAL AND CHEMICAL PROPERTIES | |
9.1 INFORMATION ABOUT BASIC PHYSICAL AND CHEMICAL PROPERTIES:
APPEARANCE, COLOR AND ODOR:
WHITE CRYSTALLINE POWDER CONTAINING SMALL BROWN PARTICLES, ODORLESS.
PH: 8.2 (1% SOLUTION).
BOILING POINT: NOT APPLICABLE.
FREEZING POINT: NOT APPLICABLE.
FLASH POINT: NOT APPLICABLE.
AUTOIGNITION TEMPERATURE: NOT APPLICABLE.
FLAMMABILITY: NOT APPLICABLE.
EXPLOSIVE PROPERTIES: NOT APPLICABLE.
OXIDIZING PROPERTIES: NOT APPLICABLE.
VAPOR PRESSURE: NEGLIGIBLE.
RELATIVE DENSITY: APPROXIMATELY 1 G/CC.
WATER SOLUBILITY: 3.4 - 7.7 G/100 ML (AT 20 DEG. C IN WATER).
PARTITION COEFFICIENT: NO DATA.
| 10. STABILITY AND REACTIVITY | |
10.1 REACTIVITY: THE PREPARATION IS STABLE.
10.2 CHEMICAL STABILITY:
THE PREPARATION IS STABLE IN NORMAL CONDITIONS OF STORAGE AND USE.
10.3 POTENTIAL HAZARDOUS REACTIONS:
CONTACT WITH ACIDS. TEMPERATURES ABOVE 109 DEG. C.
10.4 CONDITIONS TO AVOID:
DURING USE, PREVENT JETS OF PRODUCT FROM AFFECTING SKIN AND EYES. THE
PRODUCT FRACTION WITH HIGHEST GRANULOMETRY CAN HAVE CORROSIVE EFFECTS ON
SKIN AND EYES BECAUSE IT IS NOT WATER-SOLUBLE.
10.5 INCOMPATIBLE MATERIALS:
INCOMPATIBLE WITH ACIDS (EFFERVESCES AND EVOLVES CARBON DIOXIDE).
10.6 HAZARDOUS DECOMPOSITION PRODUCTS:
IN THE PRESENCE OF ACIDS:
CARBON DIOXIDE (POTENTIALLY HAZARDOUS IN AN ENCLOSED SPACE).
IN A FIRE:
CARBON DIOXIDE, SODIUM CARBONATE (FOR TEMPERATURES >109 DEG. C),
SODIUM OXIDE.
| 11. TOXICOLOGICAL INFORMATION | |
11.1 TOXICOLOGICAL INFORMATION:
CONSIDERING THE AVAILABLE DATA, SODIUM BICARBONATE IS A SUBSTANCE WITH
LOW TOXICITY. LD50 ORAL RAT 4220 MG/KG. SIMILAR PRODUCT LD50 ORAL RAT
8000 MG/KG. NO LONG TERM EFFECTS HAVE BEEN REPORTED.
| 12. ECOLOGICAL INFORMATION | |
12.1 ECOTOXICITY:
SODIUM BICARBONATE:
FISH, LEPOMIS MACROCHIRUS LC50 (96H): 8600 MG/L.
DAPHNIA SP., LC50 (48H): 2350 MG/L.
SIMILAR PRODUCTS:
DAPHNIDS. (48 HOUR) EC 50: 4100 MG/L
NOEL: 3100 MG/L
BLUEGILL (96 HOUR) LC50: 7100 MG/L
NOEC: 5200 MG/L
RAINBOW TROUT (96 HOUR) LC50: 7700 MG/L
NOEC: 2300 MG/L
12.2 PERSISTENCE AND DEGRADABILITY:
THESE PRODUCTS ARE NOT EXPECTED TO CHANGE BY AEROBIC OR ANAEROBIC
DEGRADATION (MAINLY CONSIST OF INORGANIC CHEMICALS).
12.3 BIOACCUMULATIVE POTENTIAL:
THESE PRODUCTS ARE NOT EXPECTED TO BIOACCUMULATE.
12.4 MOBILITY IN THE SOIL:
THESE PRODUCTS ARE ALMOST COMPLETELY SOLUBLE IN WATER. THEY WILL MIGRATE.
12.5 RESULTS OF THE PBT AND VPVB:
THIS MIXTURE DOES NOT CONTAIN SUBSTANCES THAT ARE CONSIDERED AS PERSISTENT.
| 13. DISPOSAL CONSIDERATIONS | |
13.1 WASTE TREATMENT METHODS:
DISPOSAL TO DRAIN OR OTHER DESTINIES MUST BE IN COMPLIANCE WITH LOCAL
CONSENTS AND REGULATIONS. DO NOT DISPOSE OF WITH ACIDS. BECAUSE OF ITS
NON-HAZARDOUS NATURE, YOU MAY BE ABLE TO SEWER DILUTED WASTE ARMEX(R*)
BLAST MEDIA FROM BLASTING OPERATIONS. COATINGS REMOVED DURING BLASTING MAY
NEED TO BE CONTAINED, COLLECTED AND DISPOSED OF SEPARATELY. YOU WILL STILL
BE REQUIRED TO PROVIDE PROOF TO THE POTW OR YOUR LOCAL AUTHORITIES THAT
THE WASTE MATERIAL IS NON- HAZARDOUS, AND OBTAIN THE APPROPRIATE DISCHARGE
PERMITS (IF DISCHARGING DIRECTLY INTO A STORM SEWER OR WATERWAY).
| 14. TRANSPORT INFORMATION | |
14.1 ADR - RID - IMO - IMDG - ICAO - IATA:
THE PRODUCT IS NOT CLASSIFIED AS DANGEROUS FOR TRANSPORT.
| 15. REGULATORY INFORMATION | |
15.1 DEDICATED REGULATIONS AND LEGISLATION ON HEALTH, SAFETY AND
ENVIRONMENT FOR THE SUBSTANCE OR MIXTURE:
CLASSIFICATION IN COMPLIANCE WITH DIRECTIVE 67/548/EEC; 1999/45/EC;
2001/58/EC.
EC REGULATION 1907/2006 (REACH); EC REGULATION 453/2010 AND/OR WITH GHS
CRITERIA. LEGISLATION ON MAJOR-ACCIDENT HAZARDS 96/82/EC INTEGRATION
DATED 2003.
15.2 ASSESSMENT OF CHEMICAL SAFETY: NOT APPLICABLE.
| 16. OTHER INFORMATION | |
LIST OF R PHRASES (SECTION 3): NOT APPLICABLE.
LIST OF H PHRASES WITH HAZARD INDICATIONS (SECTION 3): NOT APPLICABLE.
THIS SAFETY DATA SHEET CANCELS AND REPLACES ALL PREVIOUS VERSIONS. CHANGES
IMPLEMENTED COMPARED TO THE PREVIOUS VERSION:
SECTIONS 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 12, 13, 14, 15, 16 HAVE BEEN
MODIFIED IN COMPLIANCE WITH EC REG. 453/2010.
SAFETY DATA SHEET BASED ON REFERENCES EXPERIMENTATION AND REFERENCE
STANDARDS:
EC REGULATION N. 1907/2006 (REACH)
EC REGULATION N. 1272/2008
(CLP) EC REGULATION N. 790/2009
EC REGULATION N. 453/2010
DIRECTIVE 1999/45/EC AND SUBSEQUENT AMENDMENTS AND INTEGRATIONS DIRECTIVE
2001/58/EC AND SUBSEQUENT AMENDMENTS AND INTEGRATIONS DECISION 2000/532/EC
AND SUBSEQUENT AMENDMENTS AND INTEGRATIONS DIRECTIVE 67/548/EEC AND
SUBSEQUENT AMENDMENTS AND INTEGRATIONS AGREEMENT CONCERNING THE
INTERNATIONAL CARRIAGE OF DANGEROUS GOOD BY ROAD (ADR). INTERNATIONAL
MARITIME DANGEROUS GOODS CODE (IMDG CODE). INTERNATIONAL AIR TRANSPORT
ASSOCIATION (IATA).
NOTES:
THIS DOCUMENT MUST BE READ AND UNDERSTOOD BEFORE USING THE PRODUCT. THE
INFORMATION CONTAINED IN THIS SAFETY DATA SHEET IS BASED ON DATA CURRENTLY
ACCESSIBLE TO US, AND HAS THE PURPOSE OF "DESCRIBING" THE PRODUCT ONLY FOR
HEALTH AND SAFETY PURPOSES. IT IS THE USER'S RESPONSIBILITY TO BE SATISFIED
AS TO THE SUITABILITY OF THE PRODUCT FOR ANY PARTICULAR APPLICATION.
THIS PRODUCT SAFETY DATA SHEET IS OFFERED SOLELY FOR YOUR INFORMATION,
CONSIDERATION AND INVESTIGATION. AGSCO CORPORATION PROVIDES NO WARRANTIES,
EITHER EXPRESS OR IMPLIED, AND ASSUMES NO RESPONSIBILITY FOR THE ACCURACY
OR COMPLETENESS OF DATA CONTAINED HEREIN. AGSCO CORPORATION URGES PERSONS
RECEIVING THIS INFORMATION TO MAKE THEIR OWN DETERMINATION AS TO THE
INFORMATION SUITABILITY FOR THEIR PARTICULAR APPLICATION.