| Common Name: | CORROSION PREVENTATIVE COMPOUND, AEROSOL |
| Manufacturer: | LHB INDUSTRIES |
| SDS Revision Date: | 8/6/2003 |
| SDS Format: | No Format Specified |
| Item Number(s): | 5MN27 |
| Manufacturer Model Number(s): | 8030-01-347-0979 |
SDS Table of Contents
Click the desired link below to jump directly to that section in the SDS.
LHB INDUSTRIES
MATERIAL SAFETY DATA SHEET
| SECTION 1 - CHEMICAL PRODUCT AND COMPANY IDENTIFICATION |  |
MANUFACTURER:
LHB INDUSTRIES
8833 FLEISCHER PLACE
BERKELEY, MO 63134
EMERGENCY TELEPHONE NUMBER: (800) 424-9300 (CHEMTREC)
INFORMATION TELEPHONE NUMBER: (314) 423-4333
DATE OF PREPARATION: AUGUST 6, 2003
PRODUCT ID: CORROSION PREVENTATIVE COMPOUND, AEROSOL
SPECIFICATION: MIL-C-85054B TYPE I CLASS 134A
LHB PART NUMBER: 0934-000
NATIONAL STOCK NUMBER: 8030-01-347-0979
CAGE CODE: OFTT5
CONTRACT NO.: GS-10F-40540
| SECTION 2 - COMPOSITION / INFORMATION ON INGREDIENTS | |
CAS NO. INGREDIENT WT% ACGIH TLV OSHA PEL
(STEL) (STEL)
67-63-0 ISOPROPYL ALCOHOL 19.0 400 PPM 400 PPM
811-97-2 1,1,1,2-TETRAFLUOROETHANE 16.0 NE NE
8032-32-4 VM&P NAPHTHA 15.0 300 PPM 300 PPM
8030-30-6 SOLVENT NAPHTHA 8.0 NE 100 PPM
107-98-2 1-METHOXY-2-PROPANOL 7.0 100 PPM 100 PPM
78-83-1 ISOBUTYL ALCOHOL 7.0 50 PPM 50 PPM
108-88-3 TOLUENE <4.0 50 PPM 100 PPM
71-36-3 n-BUTYL ALCOHOL <4.0 100 PPM 50 PPM
64741-65-7 SOLVENT NAPHTHA <3 300 PPM NE
25619-56-1 BARIUM <1.0 NE NE
DINONYLNAPHTHALENESULFONATE
| SECTION 3 - HAZARDS IDENTIFICATION | |
ROUTES OF EXPOSURE:
EXPOSURE MAY BE BY INHALATION AND/OR SKIN OR EYE CONTACT, DEPENDING ON
CONDITIONS OF USE. TO MINIMIZE EXPOSURE, FOLLOW RECOMMENDATIONS FOR PROPER
USE, VENTILATION, AND PERSONAL PROTECTIVE EQUIPMENT.
EFFECTS OF OVEREXPOSURE:
IRRITATION OF EYES, SKIN AND UPPER RESPIRATORY SYSTEM. MAY CAUSE NERVOUS
SYSTEM DEPRESSION. EXTREME OVEREXPOSURE MAY RESULT IN UNCONSCIOUSNESS AND
POSSIBLY DEATH.
SIGNS AND SYMPTOMS OF OVEREXPOSURE:
HEADACHE, DIZZINESS, NAUSEA, AND LOSS OF COORDINATION ARE INDICATIONS OF
EXCESSIVE EXPOSURE TO VAPORS OR SPRAY MISTS. REDNESS AND ITCHING OR BURNING
SENSATION MAY INDICATE EYE OR EXCESSIVE SKIN EXPOSURE.
MEDICAL CONDITIONS AGGRAVATED BY EXPOSURE: NONE GENERALLY RECOGNIZED.
CANCER INFORMATION:
FOR COMPLETE DISCUSSION OF TOXICOLOGY DATA REFER TO SECTION 11.
| SECTION 4 - FIRST AID MEASURES | |
INHALATION:
IF INHALED, REMOVE TO FRESH AIR. IF NOT BREATHING, GIVE ARTIFICIAL
RESPIRATION, PREFERABLY MOUTH-TO-MOUTH. IF BREATHING IS DIFFICULT GIVE
OXYGEN. GET MEDICAL ATTENTION.
SKIN CONTACT:
REMOVE CONTAMINATED CLOTHING AND LAUNDER BEFORE REUSE. WASH WITH SOAP AND
WATER.
EYE CONTACT:
IMMEDIATELY FLUSH EYES WITH PLENTY OF WATER FOR AT LEAST 15 MINUTES AND GET
MEDICAL ATTENTION AFTER FLUSHING.
INGESTION:
DO NOT INDUCE VOMITING. GIVE NOTHING BY MOUTH. GET IMMEDIATE MEDICAL
ATTENTION.
| SECTION 5 - FIRE FIGHTING MEASURES | |
FLASH POINT: 55 DEG. F
LEL: ND
UEL: ND
EXTINGUISHING MEDIA: CARBON DIOXIDE, DRY CHEMICALS, FOAM
SPECIAL EXPOSURE HAZARDS:
DO NOT EXPOSE TO TEMPERATURES OVER 120 DEG. F. KEEP AWAY FROM HEAT, SPARKS
AND FLAME. CONTAINERS MAY EXPLODE WHEN EXPOSED TO EXTREME HEAT.
APPLICATIONS TO HOT SURFACES REQUIRE SPECIAL PRECAUTIONS. DURING EMERGENCY
CONDITIONS OVEREXPOSURE TO DECOMPOSITION PRODUCTS MAY CAUSE A HEALTH
HAZARD. SYMPTOMS MAY NOT BE IMMEDIATELY APPARENT. OBTAIN MEDICAL ATTENTION.
SPECIAL PROTECTIVE EQUIPMENT:
WATER MAY BE USED TO KEEP FIRE-EXPOSED CONTAINERS COOL. FIRE FIGHTERS
SHOULD WEAR FULL PROTECTIVE CLOTHING, INCLUDING SELF-CONTAINED BREATHING
EQUIPMENT.
NFPA RATING:
HEALTH 2
FLAMMABILITY 2
REACTIVITY 0
HMIS CLASSIFICATION:
HEALTH 2
FLAMMABILITY 2
REACTIVITY 0
| SECTION 6 - ACCIDENTAL RELEASE MEASURES | |
PERSONAL PRECAUTIONARY MEASURES:
AVOID INHALATION. USE GOOD VENTILATION. READ ENTIRE LABEL BEFORE USING AND
FOLLOW ALL LABEL DIRECTIONS.
ENVIRONMENTAL PRECAUTIONARY PROCEDURE FOR CLEANING/ABSORPTION:
DISPOSE OF IN ACCORDANCE WITH APPLICABLE FEDERAL, STATE & LOCAL
REGULATIONS. REMOVE IGNITION SOURCES AND WORK WITH NON-SPARKING TOOLS.
USE OIL ABSORBENT MATERIALS.
| SECTION 7 - HANDLING AND STORAGE | |
HANDLING:
KEEP OUT OF REACH OF CHILDREN. KEEP AWAY FROM HEAT SPARKS, AND OPEN FLAME.
DURING USE AND UNTIL ALL VAPORS ARE GONE:
KEEP AREA VENTILATED - DO NOT SMOKE - EXTINGUISH ALL FLAMES, PILOT LIGHTS,
AND HEATERS - TURN OFF STOVES, ELECTRIC TOOLS AND APPLIANCES, AND ANY OTHER
SOURCE OF IGNITION. CONSULT NFPA CODE. USE APPROVED BONDING AND GROUNDING
PROCEDURES. CONTENTS UNDER PRESSURE. DO NOT PUNCTURE, INCINERATE, OR
EXPOSE TO TEMPERATURES ABOVE 120 DEG. F. HEAT FROM SUNLIGHT, RADIATORS,
STOVES, HOT WATER, AND OTHER HEAT SOURCES COULD CAUSE CONTAINER TO BURST.
DO NOT TAKE INTERNALLY.
STORAGE: CATEGORY - NFPA 30B LEVEL 2 AEROSOL
DO NOT STORE WHERE TEMPERATURES MAY EXCEED 120 DEG. F (48.9 DEG. C).
| SECTION 8 - EXPOSURE CONTROLS/PERSONAL PROTECTION | |
ENGINEERING CONTROLS:
LOCAL EXHAUST PREFERABLE. GENERAL EXHAUST ACCEPTABLE IF THE EXPOSURE TO
MATERIALS IN SECTION 2 IS MAINTAINED BELOW APPLICABLE EXPOSURE LIMITS.
RESPIRATORY PROTECTION:
IF PERSONAL EXPOSURE CANNOT BE CONTROLLED TO BELOW APPLICABLE LIMITS BY
VENTILATION, WEAR A PROPERLY FITTED ORGANIC VAPOR/PARTICULATE RESPIRATOR
APPROVED BY NIOSH/MSHA FOR PROTECTION AGAINST MATERIALS IN SECTION 2.
GLOVES:
NONE REQUIRED FOR AEROSOL PRODUCTS WHERE A MINIMAL SKIN CONTACT IS
EXPECTED. FOR LONG OR REPEATED CONTACT WEAR CHEMICAL RESISTANT GLOVES.
SKIN PROTECTION:
IMPERVIOUS CLOTHES TO PROTECT SKIN. WASH PROMPTLY WHEN SKIN BECOMES
CONTAMINATED.
EYES: SAFETY GLASSES WITH SIDE SHIELDS OR CHEMICAL GOGGLES.
OTHER PERSONAL PROTECTION DATA:
USE ONLY WITH ADEQUATE VENTILATION. AVOID CONTACT WITH SKIN AND EYES.
WASH HANDS AFTER USING.
| SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES | |
PHYSICAL STATE: LIQUID/GAS
COLOR: DARK BLUE
ODOR: SOLVENT
SPECIFIC GRAVITY: 0.882
DENSITY: 7.36 LB/GAL
VAPOR DENSITY (AIR=1): >1 (HEAVIER THAN AIR)
SOLUBILITY IN WATER: INSOLUBLE
| SECTION 10 - STABILITY AND REACTIVITY | |
CHEMICAL STABILITY: STABLE
HAZARDOUS POLYMERIZATION: WILL NOT OCCUR
CONDITIONS TO AVOID:
DO NOT EXPOSE TO HEAT OR STORE AT TEMPERATURE ABOVE 120 DEG. F
MATERIAL TO AVOID: STRONG ACIDS. OXIDIZING AGENTS.
HAZARDOUS DECOMPOSITION PRODUCTS: CARBON MONOXIDE, AND CARBON DIOXIDE
| SECTION 11 - TOXICOLOGICAL INFORMATION | |
CHRONIC HEALTH HAZARDS:
PROLONGED OVEREXPOSURE TO SOLVENT INGREDIENTS IN SECTION 2 MAY CAUSE
ADVERSE EFFECTS OF THE LIVER, URINARY AND BLOOD FORMING SYSTEMS.
REPORTS HAVE ASSOCIATED REPEATED AND PROLONGED OVEREXPOSURE TO SOLVENTS
WITH PERMANENT BRAIN AND NERVOUS SYSTEM DAMAGE.
TOXICOLOGY DATA (LISTED IF AVAILABLE):
CAS NO. COMPONENT
108-88-3 TOLUENE
LC50 RAT 4HR: 4000 PPM
LD50: 5000 MG/KG
107-98-2 1-METHOXY-2-PROPANOL
LD50: 6600 MG/KG
| SECTION 12 - ECOLOGICAL INFORMATION | |
ECOLOGICAL INFORMATION: NO DATA AVAILABLE
| SECTION 13 - DISPOSAL CONSIDERATIONS | |
DISPOSAL OF WASTE METHOD:
WASTE FROM THIS PRODUCT MAY BE HAZARDOUS AS DEFINED UNDER THE RESOURCE
CONSERVATION AND RECOVERY ACT (RCRA) 40 CFR 261. WASTE MUST BE TESTED FOR
IGNITABILITY TO DETERMINE THE APPLICABLE EPA HAZARDOUS WASTE NUMBERS.
DO NOT INCINERATE. DEPRESSURIZE CONTAINER. DISPOSE OF IN ACCORDANCE WITH
FEDERAL, STATE, AND LOCAL REGULATIONS REGARDING POLLUTION.
| SECTION 14 - TRANSPORT INFORMATION | |
U.S. DOT:
49 CFR 172.101 HAZARDOUS MATERIALS TABLE:
PROPER SHIPPING NAME: CONSUMER COMMODITY
HAZARD CLASS OR DIVISION: ORM-D
IDENTIFICATION NUMBER: NONE
PACKING GROUP: NONE
IATA:
LIST OF DANGEROUS GOODS:
PROPER SHIPPING NAME: AEROSOLS, FLAMMABLE
HAZARD CLASS OR DIVISION: 2.1
IDENTIFICATION NUMBER: UN1950
PACKING GROUP:
| SECTION 15 - REGULATORY INFORMATION | |
U.S. REGULATORY RULES:
SARA SECTION 302: NONE
SARA 313 CHEMICALS: TOLUENE, n-BUTYL ALCOHOL
CALIFORNIA PROPOSITION 65: TOLUENE
RCRA STATUS: THIS MATERIAL IS CLASSIFIED AS A HAZARDOUS WASTE.
TSCA CERTIFICATION:
ALL CHEMICALS IN THIS PRODUCT ARE LISTED, OR ARE EXEMPT FROM LISTING ON THE
TSCA INVENTORY.
VOC CONTENT: 60% BY WT, 529 G/L
HAZARDOUS AIR POLLUTANTS (CLEAN AIR ACT, SECTION 112(B)):
HAPS (LBS/GAL): ND
HAPS (LBS/GAL OF SOLIDS): ND
HAPS (LBS/LB OF SOLIDS): ND
| SECTION 16 - OTHER INFORMATION | |
REVISION NUMBER: 03
ADDITIONAL INFORMATION:
THIS MSDS IS PREPARED IN ACCORDANCE WITH FED-STD-313D AND MEETS THE
REQUIREMENTS OF 29 CFR 1910.1200.
IMPORTANT NOTE:
THIS INFORMATION IS FURNISHED WITHOUT WARRANTY, EXPRESSED OR IMPLIED, AS TO
ACCURACY OR COMPLETENESS. THE INFORMATION IS OBTAINED FROM VARIOUS SOURCES
INCLUDING THE MANUFACTURER AND OTHER THIRD PARTY SOURCES. THE INFORMATION
MAY NOT BE VALID UNDER ALL CONDITIONS NOR IF THIS MATERIAL IS USED IN
COMBINATION WITH OTHER MATERIALS OR ANY PROCESS. FINAL DETERMINATION OF
SUITABILITY OF ANY MATERIAL IS THE SOLE RESPONSIBILITY OF THE USER.
PREPARED BY: MARK EPSTEIN, R&D MANAGER
MSDS PART NO.: 0932-G-800