| Common Name: | MAINTENANCE-FREE SEALED LEAD-ACID GELS |
| Manufacturer: | DUAL-LITE |
| SDS Revision Date: | 1/15/1996 |
| SDS Format: | No Format Specified |
| Item Number(s): | 24D676, 3WAK1, 3YAG3, 8A868, 8PCR0, 9MA29, 9VJH6 |
| Manufacturer Model Number(s): |
SDS Table of Contents
Click the desired link below to jump directly to that section in the SDS.
DUAL LITE
MAINTENANCE-FREE SEALED LEAD-ACID GELS
MATERIAL SAFETY DATA SHEET
IDENTITY (AS USED ON LABEL AND LIST):
NOTE:
BLANK SPACES ARE NOT PERMITTED. IF ANY ITEM IS NOT APPLICABLE, OR NO
INFORMATION IS AVAILABLE, THE SPACE MUST BE MARKED TO INDICATE THAT.
| SECTION I |  |
BATTERY MANUFACTURER'S MSDS:
DISTRIBUTED BY: DUAL-LITE
EMERGENCY TELEPHONE NUMBER: NOT APPLICABLE
TELEPHONE NUMBER FOR INFORMATION: NOT APPLICABLE
MSDS #: 3
DATE PREPARED: JAN. 15, 1996
SIGNATURE OF PREPARER (OPTIONAL):
| SECTION II - HAZARDOUS INGREDIENTS/IDENTITY INFORMATION | |
HAZARDOUS COMPONENTS OSHA ACGIH OTHER LIMITS %
(SPECIFIC CHEMICAL PEL TLV RECOMMENDED (OPTIONAL)
IDENTITY: COMMON NAME(S))
LEAD - NEGATIVE 30-60%
ELECTRODE - Pb
SULFURIC ACID - H2SO4 10-20%
LEAD DIOXIDE - POSITIVE 5-25%
ELECTRODE - PbO2
LEAD SULFATE - POSITIVE 1-25%
ELECTRODE - PbSO4
| SECTION III - PHYSICAL/CHEMICAL CHARACTERISTICS | |
BOILING POINT: N/A
SPECIFIC GRAVITY (H2O=1): N/A
VAPOR PRESSURE (MMHg.): N/A
MELTING POINT: N/A
VAPOR DENSITY (AIR=1): N/A
EVAPORATION RATE BUTYL ACETATE=1: N/A
SOLUBILITY IN WATER: N/A
APPEARANCE AND ODOR: N/A
| SECTION IV - FIRE AND EXPLOSION HAZARD DATA | |
FLASH POINT (METHOD USED): DIRECT FLAME
FLAMMABLE LIMITS: UL-94HB
LEL: N/A
UEL: N/A
EXTINGUISHING MEDIA: WATER, FOAM, DRY
SPECIAL FIRE FIGHTING PROCEDURES: N/A
UNUSUAL FIRE AND EXPLOSION HAZARDS:
KEEP LIGHTED CIGARETTES, SPARKS AND FLAMES AWAY. EXPLOSION CAN RESULT FROM
IMPROPER CHARGING AND IGNITION OF CHARGING GASES. EXPLOSION CAN RESULT IF
CHARGED IN GAS TIGHT ENCLOSURE.
| SECTION V - REACTIVITY DATA | |
STABILITY:
UNSTABLE ( )
STABLE (XX)
CONDITIONS TO AVOID:
AVOID SHORTING.
USE ONLY APPROVED CHARGING METHODS.
INCOMPATIBILITY (MATERIALS TO AVOID):
HAZARDOUS DECOMPOSITION OR BY-PRODUCTS:
HAZARDOUS POLYMERIZATION:
MAY OCCUR ( )
WILL NOT OCCUR (XX)
CONDITIONS TO AVOID: DO NOT PUNCTURE BATTERY CASE.
| SECTION VI - HEALTH HAZARD DATA | |
ROUTE(S) OF ENTRY:
INHALATION?:
SKIN?:
INGESTION?:
HEALTH HAZARDS (ACUTE AND CHRONIC):
NOT APPLICABLE FOR FINISHED PRODUCT USED IN NORMAL CONDITIONS.
CARCINOGENICITY:
NTP?:
IARC MONOGRAPHS?:
OSHA REGULATED?:
SIGNS AND SYMPTOMS OF EXPOSURE:
MEDICAL CONDITIONS GENERALLY AGGRAVATED BY EXPOSURE: N/A
EMERGENCY AND FIRST AID PROCEDURES:
BATTERY CONTAINS ACID ELECTROLYTE. IF BATTERY CASE IS PUNCTURED,
COMPLETELY FLUSH ANY RELEASED MATERIAL FROM SKIN OR EYES WITH WATER.
| SECTION VII - PRECAUTIONS FOR SAFE HANDLING AND USE | |
STEPS TO BE TAKEN IN CASE MATERIAL IS RELEASED OR SPILLED:
AVOID CONTACT WITH ACID MATERIALS. USE SODA ASH OR LIME TO NEUTRALIZE.
FLUSH WITH LARGE AMOUNT OF WATER.
WASTE DISPOSAL METHOD:
PLACE IN ACID-RESISTANT CONTAINERS. DISPOSE IN ACCORDANCE WITH FEDERAL,
STATE & LOCAL REGULATIONS. DO NOT INCINERATE.
PRECAUTIONS TO BE TAKEN IN HANDLING AND STORING:
OTHER PRECAUTIONS:
| SECTION VIII - CONTROL MEASURES | |
NOT APPLICABLE FOR FINISHED PRODUCT
RESPIRATORY PROTECTION (SPECIFY TYPE):
VENTILATION:
LOCAL EXHAUST:
MECHANICAL (GENERAL):
SPECIAL:
OTHER:
PROTECTIVE GLOVES:
EYE PROTECTION:
OTHER PROTECTIVE CLOTHING OR EQUIPMENT:
WORK/HYGIENIC PRACTICES:
(REPRODUCE LOCALLY)
FAX DOC 5302