| Common Name: | GLUE BOARDS FOR EFK'S |
| Manufacturer: | SILVANDERSSON SWEDEN |
| SDS Revision Date: | 1/3/2005 |
| SDS Format: | No Format Specified |
| Item Number(s): | 1ABE7, 1ABE8, 1ABE9 |
| Manufacturer Model Number(s): |
SDS Table of Contents
Click the desired link below to jump directly to that section in the SDS.
MATERIAL SAFETY DATA SHEET
SILVANDERSSON
SILVANDERSSON SWEDEN AB
P.O. BOX 56, SE-310 20 KNARED
PH.: +46 430 78040
FAX.: +46-430 780 50
| 1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION |  |
PRODUCT NAME: GLUE BOARDS FOR EFK'S
PRODUCT CODE:
COMPANY:
SILVANDERSSON SWEDEN AB
P.O. BOX 56
SE-310 20 KNARED
SWEDEN
PHONE: 0430-780 40
DATE: 2005-03-01
REPLACE:
| 2. COMPOSITION/INFORMATION ON INGREDIENTS | |
CHEMICAL FAMILY: HOT MELT ADHESIVE
INGREDIENTS CAS NO. CONTENT %
PARAFFIN OIL 8042-47-5 40 - 50%
HYDROCARBON RESIN 68132-00-3 40 - 50%
STYRENE POLYMER 25038-32-8 5 - 10%
STABILATORS <1%
ANTIOXIDANTS <0.5%
| 3. HAZARDS IDENTIFICATION | |
NOT CONSIDERED AS HAZARDOUS (EEC):
EYE:
AS SUPPLIED: IRRITANT AS A FOREIGN BODY.
AS USED: SEVERE THERMAL HAZARD.
SKIN CONTACT:
AS SUPPLIED: NO HAZARD.
AS USED: SEVERE THERMAL HAZARD.
INHALATION:
VAPORS AND/OR AEROSOLS, WHICH MAY BE FORMED AT ELEVATED TEMPERATURES MAY BE
IRRITATING TO EYES AND RESPIRATORY TRACT.
INGESTION: LOW ORDER OF TOXICITY.
| 4. FIRST-AID MEASURES | |
EYE:
IF HOT:
FLUSH WITH COOL WATER. TREAT AS WAX OR RESIN BURN. DO NOT ATTEMPT
TO REMOVE SOLIDIFIED ADHESIVE. GET MEDICAL ATTENTION IMMEDIATELY.
AS SUPPLIED: REMOVE AS FOREIGN BODY.
SKIN CONTACT:
IF HOT:
FLUSH WITH COOL WATER. TREAT AS WAX OR RESIN BURN. DO NOT ATTEMPT
TO REMOVE SOLIDIFIED ADHESIVE. GET MEDICAL ATTENTION IMMEDIATELY.
AS SUPPLIED: NON-HAZARDOUS.
INHALATION:
REMOVE TO FRESH AIR. GET MEDICAL ATTENTION IF IRRITATION PERSISTS.
INGESTION: NONE REQUIRED.
| 5. FIRE FIGHTING MEASURES | |
AUTO FLAMMABILITY: NOT APPLICABLE
FLASH POINT: >200 DEG. C
EXTINGUISHING MEDIA: CO2 - DRY CHEMICAL
SPECIAL FIRE FIGHTING PROCEDURES: NO SPECIAL PROCEDURES ARE REQUIRED.
FIRE & EXPLOSION HAZARDS: NOT APPLICABLE.
HAZARDOUS COMBUSTION PRODUCTS:
CARBON MONOXIDE, CARBON DIOXIDE, UNKNOWN HYDROCARBONS.
UPPER EXPLOSION LIMIT (%): NOT APPLICABLE.
LOWER EXPLOSION LIMIT (%): NOT APPLICABLE.
| 6. ACCIDENTAL RELEASE MEASURES | |
SPILL OR LEAKAGE PROCEDURES:
ALLOW TO COOL AND SOLIDIFY. SCRAPE UP AND COLLECT IN SUITABLE CONTAINER FOR
DISPOSAL.
FOR SAFETY AND ENVIRONMENTAL PRECAUTIONS, PLEASE REVIEW ENTIRE SAFETY DATA
SHEET FOR NECESSARY INFORMATION.
| 7. HANDLING AND STORAGE | |
STORAGE TEMPERATURE: AMBIENT.
SPECIAL SENSITIVITY: NO SPECIAL SENSITIVITY.
HANDLING/STORAGE: STORE IN COOL, DRY AREA.
PRECAUTIONS:
THIS PRODUCT SHOULD ONLY BE HEATED TO RECOMMENDED TEMPERATURES. THE HAZARDS
OF PYROLYSIS PRODUCTS ARE UNKNOWN.
VENTILATION REQUIREMENTS: LOCAL EXHAUST OVER GLUE CHAMBER.
SENSITIVITY TO STATIC ELECTRICITY: NO.
| 8. EXPOSURE CONTROL/PERSONAL PROTECTION | |
VENTILATION REQUIREMENTS: LOCAL EXHAUST OVER GLUE CHAMBER.
EYE PROTECTION REQUIREMENTS:
SAFETY GLASSES, GOGGLES OR FACE SHIELD TO PROTECT AGAINST SPLASHING.
GLOVE REQUIREMENTS: THERMALLY RESISTANT GLOVES SHOULD BE WORN.
CLOTHING REQUIREMENTS: UNIFORMS, COVERALLS, OR A LAB COAT SHOULD BE WORN.
RESPIRATORY REQUIREMENTS: NONE REQUIRED IF GOOD VENTILATION IS MAINTAINED.
| 9. PHYSICAL AND CHEMICAL PROPERTIES | |
PURE SUBSTANCE OR PREPARATION: PREPARATION
PHYSICAL FORM: SOLID
APPEARANCE/ODOR: AMBER; NO ODOR
ODOR THRESHOLD: NOT APPLICABLE
pH AS IS: NOT APPLICABLE
BOILING POINT: >250 DEG. C
MELTING/FREEZING POINT: 50 - 60 DEG. C
SOLUBILITY IN WATER: INSOLUBLE; WATER
PARTITION COEFFICIENT (n-OCTANOL/WATER): NOT APPLICABLE
RELATIVE DENSITY: 1.000
EVAPORATE RATE: NOT APPLICABLE
VAPOR PRESSURE MMHg: NOT APPLICABLE
VAPOR DENSITY (AIR=1): NOT APPLICABLE
VOLATILES: NONE
VOLATILE ORGANIC COMPOUNDS: <1 G/L
AUTO FLAMMABILITY: NOT APPLICABLE
FLASH POINT: >200 DEG. C
OXIDIZING PROPERTIES: NOT APPLICABLE
| 10. STABILITY AND REACTIVITY | |
STABILITY: STABLE
HAZARDOUS DECOMPOSITION PRODUCTS: NOT APPLICABLE
| 11. TOXICOLOGICAL INFORMATION | |
PRODUCT TOXICOLOGY:
PRODUCT INFORMATION: NOT ESTABLISHED
CHRONIC (LONG TERM) EFFECTS OF EXPOSURE:
ROUTE OF ENTRY:
INHALATION
SKIN CONTACT
EYE CONTACT.
EFFECTS OF CHRONIC EXPOSURE:
ALTHOUGH THIS PRODUCT HAS NOT BEEN TESTED FOR CHRONIC EFFECTS; IT IS JUDGED
AS HAVING A LOW ORDER OF TOXICITY BASED ON COMPONENT INFORMATION. USE OF
GOOD INDUSTRIAL HYGIENE PRACTICES IS RECOMMENDED.
TARGET ORGANS: NONE KNOWN
SPECIAL HEALTH EFFECTS: NONE KNOWN
| 12. ECOLOGICAL INFORMATION | |
POTENTIAL EFFECT ON ENVIRONMENT: UNKNOWN
MOBILITY: UNKNOWN
PERSISTENCE AND DEGRADABILITY: UNKNOWN
POTENTIAL TO BIO ACCUMULATE ECOTOXICITY: UNKNOWN
AQUATIC TOXICITY: NONE ESTABLISHED
| 13. DISPOSAL CONSIDERATION | |
WASTE DISPOSAL METHODS:
WASTE DISPOSAL SHOULD BE IN ACCORDANCE WITH EXISTING COMMUNITY, NATIONAL
AND LOCAL REGULATIONS.
EMPTY CONTAINER WARNINGS: NOT NEEDED
| 14. TRANSPORT INFORMATION (SEE ALSO SECTION 9) | |
ADR/RID: NOT APPLICABLE
CEFIC TREMCARD NUMBER: NOT APPLICABLE
HAZCHEM CODE: NOT APPLICABLE
KEMMLER CODE: NOT APPLICABLE
IMDG CLASSIFICATION: NOT APPLICABLE
IATA CLASSIFICATION: NOT APPLICABLE
U.N. NUMBER (S:I:N:): NOT APPLICABLE
U.N. CLASS, PACKING GROUP: NOT APPLICABLE
| 15. REGULATORY INFORMATION | |
EEC HAZARD CLASSIFICATION: NONE
DIRECTIVES 88/379/EEC AND 91/155/EEC HAVE BEEN CONSIDERED WHEN COMPILING
THIS SDS; THE INFORMATION IS PROVIDED FOR HEALTH AND SAFETY ASSESSMENT
BY AN INDUSTRIAL USER. REFERENCE SHOULD BE MADE TO ANY RELEVANT LOCAL OR
NATIONAL HEALTH, SAFETY AND ENVIRONMENTAL LEGISLATION. THIS INFORMATION
DOES NOT CONSTITUTE INDICATION OF SUITABILITY FOR SPECIFIC USES.
| 16. OTHER INFORMATION | |
FDA-STATUS:
COMPLIES WITH THE COMPOSITION REQUIREMENTS OF "FOOD PACKAGING ADHESIVES"
- 21 CFR 175-105.