| Common Name: | RESIN, HARDENER |
| Manufacturer: | WELD WANT GROUP |
| SDS Revision Date: | 12/18/2003 |
| SDS Format: | No Format Specified |
| Item Number(s): | 1TDJ1 |
| Manufacturer Model Number(s): |
SDS Table of Contents
Click the desired link below to jump directly to that section in the SDS.
| 1. PRODUCT/COMPANY IDENTIFICATION |  |
ITEM NO.: QUICK SETTING EPOXY ADHESIVE
PART #: 8212-S
PRODUCT NAME: RESIN
MANUFACTURER'S NAME & ADDRESS: WELD WANT GROUP CO., LTD
| 2. HAZARDOUS INGREDIENTS | |
CAS # CHEMICAL NAME TLV/PEL
25068-38-6 EPOXY RESIN NONE
| 3. PHYSICAL & CHEMICAL CHARACTERISTICS | |
BOILING POINT: N/A
VAPOR PRESSURE: N/A
VAPOR DENSITY: N/A
SOLUBILITY IN WATER: SLIGHT
SPECIFIC GRAVITY (H2O=1): 1.17
PERCENT VOLATILE BY VOLUME (%): 0%
EVAPORATION RATE: N/A
PERCENT SOLID BY WEIGHT (%): 100%
APPEARANCE AND ODOR: CLEAR AMBER LIQUID WITH SLIGHT ODOR.
ANALYTICAL: 9.47 P LBS/GAL
| 4. HAZARDOUS INGREDIENTS | |
FLAMMABLE LIMITS:
LEL: NOT ESTABLISHED
UEL: NOT ESTABLISHED
EXTINGUISHING MEDIA: WATER FOG, DRY CHEMICAL, CO2.
SPECIAL FIRE FIGHTING PROCEDURES:
DO NOT ENTER CONFINED FIRE SPACE WITHOUT FULL PROTECTIVE GEAR.
INCLUDING A POSITIVE PRESSURE. SELF-CONTAINED. NIOSH APPROVED
BREATHING APPARATUS. COOL FIRE EXPOSED CONTAINER WITH WATER.
UNUSUAL FIRE AND EXPLOSION HAZARD:
CONTAINER AREAS EXPOSED TO INTENSE HEAT OR FLAME SHOULD BE COOLED WITH
H2O TO PREVENT PRESSURE BUILD-UP AND WEAKENING OF CONTAINER STRUCTURE.
| 5. REACTIVITY DATA | |
STABILITY: STABLE.
CONDITIONS TO AVOID:
AVOID HIGH TEMPERATURES, OPEN FLAMES AND UNSCHEDULED CONTACT WITH CURING
AGENTS.
INCOMPATIBILITY:
INCOMPATIBLE WITH STRONG OXIDIZING AGENTS. STRONG ACIDS AND BASES,
SECONDARY ALIPHATIC AMINES AND MERCAPTANS.
HAZARDOUS DECOMPOSITION PRODUCTS:
CARBON DIOXIDE (CO2) CARBON MONOXIDE (CO), BY-PRODUCTS MAY INCLUDE OXIDES
OF NITROGEN (NOx) WHEN BURNED.
HAZARDOUS POLYMERIZATION: WILL NOT OCCUR.
CONDITIONS TO AVOID:
AVOID MIXING RESIN AND HARDENER IN UNCONTROLLABLE QUANTITIES.
| 6. HEALTH HAZARD DATA | |
CHEMICAL LISTED AS CARCINOGEN OR POTENTIAL CARCINOGEN IN NTP OR OSHA:
THIS MATERIAL IS NEITHER CARCINOGENIC NOR POTENTIALLY CARCINOGENIC.
| 7. EFFECTS OF OVEREXPOSURE | |
SKIN CONTACT:
PRODUCT COULD BE MODERATELY IRRITATING TO SKIN. MAY CAUSE ALLERGIC SKIN
REACTION IN SUSCEPTIBLE INDIVIDUALS. AVOID DIRECT SKIN CONTACT WHEN USING
THIS MATERIAL.
EYE CONTACT:
PRODUCT COULD BE MODERATELY IRRITATING TO THE EYES. AVOID TOUCHING EYES
WHEN USING THIS MATERIAL.
INHALATION:
BECAUSE OF ITS LOW VOLATILITY THIS PRODUCT IS NOT LIKELY TO BE AN
INHALATION HAZARD.
INGESTION:
NO ADVERSE EFFECTS ANTICIPATED BY THIS ROUTE OF EXPOSURE INCIDENTAL TO
PROPER INDUSTRIAL HANDLING.
| 8. EMERGENCY AND FIRST AID PROCEDURES | |
SKIN:
IMMEDIATELY WASH SKIN WITH SOAP AND WATER OR AN APPROVED CREAM. WASH
CONTAMINATED CLOTHING BEFORE REUSE. SEEK MEDICAL TREATMENT IF IRRITATION
OR INFLAMMATION DEVELOPS.
EYE:
IMMEDIATELY FLUSH EYES WITH GENEROUS AMOUNTS OF WATER. CONTINUE FLUSHING
EYES FOR AT LEAST 15 MINUTES, INCLUDING UNDER LIDS, TO REMOVE ALL
PARTICLES. GET MEDICAL ATTENTION IMMEDIATELY.
INHALATION:
REMOVE VICTIM TO FRESH AIR. IF BREATHING IS DIFFICULT, ADMINISTER OXYGEN.
IF NOT BREATHING, GIVE ARTIFICIAL RESPIRATION. SEEK MEDICAL HELP IF
COUGHING AND OTHER SYMPTOMS DO NOT SUBSIDE. INHALATION OF LARGE AMOUNTS OF
THE PRODUCT REQUIRES IMMEDIATE MEDICAL ATTENTION.
INGESTION:
IN GENERAL, NO TREATMENT IS NECESSARY UNLESS LARGE QUANTITIES OF PRODUCT
ARE INGESTED.
| 9. OCCUPATIONAL EXPOSURE LIMITS | |
OSHA PERMISSIBLE EXPOSURE LIMIT:
OSHA LIMITS HAVE NOT BEEN ESTABLISHED FOR THIS PRODUCT.
ACGIH THRESHOLD LIMIT VALUE:
ACGIH LIMITS HAVE NOT BEEN ESTABLISHED FOR THIS PRODUCT.
| 10. SPECIAL PROTECTION INFORMATION | |
RESPIRATORY PROTECTION: NO RESPIRATORY PROTECTION SHOULD BE NEEDED.
VENTILATION:
LOCAL EXHAUST IS RECOMMENDED. MECHANICAL EXHAUST CAN BE USED AS A BACK UP
SYSTEM.
PROTECTIVE GLOVES: CHEMICAL RESISTANT GLOVES SUCH AS PVA.
EYE PROTECTION:
NIOSH APPROVED SAFETY GLASSES OR GOGGLES WITH SIDE SHIELDS.
OTHER PROTECTIVE CLOTHING OR EQUIPMENT:
CHEMICAL RESISTANT CLOTHING AS REQUIRED TO MINIMIZE SKIN CONTACT.
| 11. SPILL OR LEAK PROCEDURES | |
STEPS TO BE TAKEN IN CASE MATERIAL IS RELEASED OR SPILLED:
USE CAUTIOUS JUDGMENT WHEN CLEANING SPILLS. SMALL SPILLS MAY BE COLLECTED
WITH ABSORBENT MATERIAL. SUCH AS CLAY OR SAND. LARGE SPILLS SHOULD BE DIKED
AND CONTAINED WITH ABSORBENT MATERIALS. FLUSH AREA WITH WATER SPRAY TO
REMOVE RESIDUE. DISPOSE OF FLUSH LEGALLY.
WASTE DISPOSAL METHODS:
DISPOSE IN ACCORDANCE WITH LOCAL, STATE AND FEDERAL REGULATIONS.
| 12. SPECIAL PRECAUTIONS | |
PRECAUTION TO BE TAKEN IN HANDLING AND STORAGE:
STORE AT AMBIENT TEMPERATURES IN WELL VENTILATED AREA. AVOID SPARKS, OPEN
FLAMES AND EXTREME HEAT. STORE SEPARATELY FROM AMINE CURING AGENTS. PROTECT
CONTAINER FROM PHYSICAL DAMAGE.
OTHER PRECAUTIONS:
CONTAINER, EVEN THOSE THAT HAVE BEEN EMPTIED, CAN CONTAIN PRODUCT RESIDUES.
HANDLE IN ACCORDANCE WITH GOOD INDUSTRIAL PRACTICES. AVOID PROLONGED OR
REPEATED CONTACT WITH SKIN. WASH WITH SOAP AND WATER BEFORE EATING,
DRINKING, SMOKING. APPLYING COSMETICS, OR USING TOILET FACILITIES. LAUNDER
CONTAMINATE CLOTHING BEFORE USE.
MATERIAL SAFETY DATA SHEET
DATE PREPARED: DECEMBER 18, 2003
| 1. PRODUCT/COMPANY IDENTIFICATION | |
ITEM NO.: QUICK SETTING EPOXY ADHESIVE
PART #: 8212-S
PRODUCT NAME: HARDENER
MANUFACTURER'S NAME & ADDRESS: WELD WANT GROUP CO., LTD
| 2. HAZARDOUS INGREDIENTS | |
CAS # CHEMICAL NAME TLV/PEL
60-56-0 CATALYST NONE
| 3. PHYSICAL & CHEMICAL CHARACTERISTICS | |
BOILING POINT: N/A
VAPOR PRESSURE: N/A
VAPOR DENSITY: N/A
SOLUBILITY IN WATER: SLIGHT
SPECIFIC GRAVITY (H2O=1): 1.15
PERCENT VOLATILE BY VOLUME (%): 0%
EVAPORATION RATE: N/A
PERCENT SOLID BY WEIGHT (%): 100%
APPEARANCE AND ODOR: CLEAR AMBER LIQUID WITH SLIGHT SASSAFRAS ODOR.
ANALYTICAL: 8.66 LBS/GAL
| 4. HAZARDOUS INGREDIENTS | |
FLAMMABLE LIMITS:
LEL: NOT ESTABLISHED
UEL: NOT ESTABLISHED
EXTINGUISHING MEDIA: WATER FOG, DRY CHEMICAL, CO2.
SPECIAL FIRE FIGHTING PROCEDURES:
DO NOT ENTER CONFINED FIRE SPACE WITHOUT FULL PROTECTIVE GEAR.
INCLUDING A POSITIVE PRESSURE. SELF-CONTAINED. NIOSH APPROVED BREATHING
APPARATUS. COOL FIRE EXPOSED CONTAINER WITH WATER.
UNUSUAL FIRE AND EXPLOSION HAZARD:
CONTAINER AREAS EXPOSED TO INTENSE HEAT OR FLAME SHOULD BE COOLED WITH
H2O TO PREVENT PRESSURE BUILD-UP AND WEAKENING OF CONTAINER STRUCTURE.
| 5. REACTIVITY DATA | |
STABILITY: STABLE.
CONDITIONS TO AVOID:
AVOID HIGH TEMPERATURES, OPEN FLAMES AND UNSCHEDULED CONTACT WITH CURING
AGENTS.
INCOMPATIBILITY:
INCOMPATIBLE WITH STRONG OXIDIZING AGENTS. STRONG ACIDS AND BASES,
SECONDARY ALIPHATIC AMINES AND MERCAPTANS.
HAZARDOUS DECOMPOSITION PRODUCTS:
CARBON DIOXIDE (CO2) CARBON MONOXIDE (CO), BY-PRODUCTS MAY INCLUDE OXIDES
OF NITROGEN (NOx) WHEN BURNED.
HAZARDOUS POLYMERIZATION: WILL NOT OCCUR.
CONDITIONS TO AVOID:
AVOID MIXING RESIN AND HARDENER IN UNCONTROLLABLE QUANTITIES.
| 6. HEALTH HAZARD DATA | |
CHEMICAL LISTED AS CARCINOGEN OR POTENTIAL CARCINOGEN IN NTP OR OSHA:
THIS MATERIAL IS NEITHER CARCINOGENIC NOR POTENTIALLY CARCINOGENIC.
| 7. EFFECTS OF OVEREXPOSURE | |
SKIN CONTACT: SKIN CONTACT MAY RESULT IN IRRITATION OR CHEMICAL BURN.
EYE CONTACT:
PRODUCT CAN CAUSE SEVERE EYE IRRITATION, SWELLING AND CHEMICAL BURN.
CONTACT LENSES SHOULD NOT BE WORN WHEN WORKING WITH THIS MATERIAL.
INHALATION: VAPOR IS IRRITATING TO THE UPPER RESPIRATORY SYSTEM AND MUCOUS.
INGESTION: LIQUID CAUSES DAMAGE TO MUCOUS MEMBRANE IF SWALLOWED.
| 8. EMERGENCY AND FIRST AID PROCEDURES | |
SKIN:
IMMEDIATELY WASH SKIN WITH SOAP AND WATER OR AN APPROVED CREAM. WASH
CONTAMINATED CLOTHING BEFORE REUSE. SEEK MEDICAL TREATMENT IF IRRITATION
OR INFLAMMATION DEVELOPS.
EYE:
IMMEDIATELY FLUSH EYES WITH GENEROUS AMOUNTS OF WATER. CONTINUE FLUSHING
EYES FOR AT LEAST 15 MINUTES, INCLUDING UNDER LIDS, TO REMOVE ALL
PARTICLES. GET MEDICAL ATTENTION IMMEDIATELY.
INHALATION:
REMOVE VICTIM TO FRESH AIR. IF BREATHING IS DIFFICULT, ADMINISTER OXYGEN.
IF NOT BREATHING, GIVE ARTIFICIAL RESPIRATION. SEEK MEDICAL HELP IF
COUGHING AND OTHER SYMPTOMS DO NOT SUBSIDE. INHALATION OF LARGE AMOUNTS OF
THE PRODUCT REQUIRES IMMEDIATE MEDICAL ATTENTION.
INGESTION:
IF SWALLOWED DO NOT INDUCE VOMITING. GIVE LARGE AMOUNTS OF WATER OR MILD IF
AVAILABLE. CALL A PHYSICIAN. TREATMENT BASED ON JUDGMENT OF THE PHYSICIAN
IN RESPONSE TO REACTIONS OF THE PATIENT. IF CONSCIOUS, HAVE THE VICTIM WASH
THE MOUTH CLEAN WITH PLENTY OF WATER AND CALL A PHYSICIAN IMMEDIATELY. DO
NOT ADMINISTER ANYTHING TO AN UNCONSCIOUS PERSON, SEEK MEDICAL ATTENTION,
AND TAKE DATA SHEET WITH YOU IF POSSIBLE.
| 9. OCCUPATIONAL EXPOSURE LIMITS | |
OSHA PERMISSIBLE EXPOSURE LIMIT:
OSHA LIMITS HAVE NOT BEEN ESTABLISHED FOR THIS PRODUCT.
ACGIH THRESHOLD LIMIT VALUE:
ACGIH LIMITS HAVE NOT BEEN ESTABLISHED FOR THIS PRODUCT.
| 10. SPECIAL PROTECTION INFORMATION | |
RESPIRATORY PROTECTION:
WEAR NIOSH APPROVED RESPIRATORY PROTECTION WHERE EXPOSURE LIMITS ARE
EXCEEDED OR IN THE ABSENCE OF PROPER ENVIRONMENTAL CONTROL.
VENTILATION:
USE ONLY WITH ADEQUATE VENTILATION. LOCAL EXHAUST IS RECOMMENDED.
MECHANICAL EXHAUST CAN BE USED AS A BACK UP SYSTEM.
PROTECTIVE GLOVES: CHEMICAL RESISTANT GLOVES SUCH AS PVA.
EYE PROTECTION: NIOSH APPROVED SAFETY GLASSES OR GOGGLES WITH SIDE SHIELDS.
OTHER PROTECTIVE CLOTHING OR EQUIPMENT:
CHEMICAL RESISTANT CLOTHING AS REQUIRED TO MINIMIZE SKIN CONTACT.
| 11. SPILL OR LEAK PROCEDURES | |
STEPS TO BE TAKEN IN CASE MATERIAL IS RELEASED OR SPILLED:
USE CAUTIOUS JUDGMENT WHEN CLEANING SPILLS. SMALL SPILLS MAY BE COLLECTED
WITH ABSORBENT MATERIAL. SUCH AS CLAY OR SAND. LARGE SPILLS SHOULD BE DIKED
AND CONTAINED WITH ABSORBENT MATERIALS. FLUSH AREA WITH WATER SPRAY TO
REMOVE RESIDUE. DISPOSE OF FLUSH LEGALLY.
| 12. SPECIAL PRECAUTIONS | |
PRECAUTION TO BE TAKEN IN HANDLING AND STORAGE:
STORE AT AMBIENT TEMPERATURES IN WELL VENTILATED AREA. AVOID SPARKS, OPEN
FLAMES AND EXTREME HEAT. STORE SEPARATELY FROM AMINE CURING AGENTS. PROTECT
CONTAINER FROM PHYSICAL DAMAGE.
OTHER PRECAUTIONS:
CONTAINER, EVEN THOSE THAT HAVE BEEN EMPTIED, CAN CONTAIN PRODUCT RESIDUES.
HANDLE IN ACCORDANCE WITH GOOD INDUSTRIAL PRACTICES. AVOID PROLONGED OR
REPEATED CONTACT WITH SKIN. WASH WITH SOAP AND WATER BEFORE EATING,
DRINKING, SMOKING. APPLYING COSMETICS, OR USING TOILET FACILITIES. LAUNDER
CONTAMINATE CLOTHING BEFORE USE.