| Common Name: | REMOVER & CLEANER, 82638, 82738, 82838, 82938 |
| Manufacturer: | ITW DYKEM |
| SDS Revision Date: | 9/4/2006 |
| SDS Format: | No Format Specified |
| Item Number(s): | 2E001 |
| Manufacturer Model Number(s): | 82638 |
SDS Table of Contents
Click the desired link below to jump directly to that section in the SDS.
ITW DYKEM(R*)
MATERIAL SAFETY DATA SHEET
HMIS(R*):
HEALTH 1
FLAMMABILITY 3
REACTIVITY 0
PERSONAL PROTECTION B
| SECTION 1 CHEMICAL PRODUCT AND COMPANY IDENTIFICATION |  |
IDENTITY: REMOVER & CLEANER
ITEM NO.: 82638, 82738, 82838, 82938
FORMULA: 8947
ANOTHER EXCLUSIVE PRODUCT OF: ITW DYKEM
ADDRESS (NUMBER, STREET, CITY, STATE, AND ZIP CODE):
805 EAST OLD 56 HIGHWAY
OLATHE, KS 66061-4914
TELEPHONE NUMBER FOR INFORMATION: 1-800-443-9536 OR 1-913-397-9889
EMERGENCY TELEPHONE NUMBER:
1-800-535-5053 (DOMESTIC)
1-352-323-3500 (INTERNATIONAL)
PRODUCT CLASS: REMOVER & CLEANER
SIGNATURE OF PREPARER (OPTIONAL): REGULATORY DEPT.
DATE PREPARED: 9/4/06
NOTE:
BLANK SPACES ARE NOT PERMITTED. IF ANY ITEM IS NOT APPLICABLE, OR NO
INFORMATION IS AVAILABLE, THE SPACE MUST BE MARKED TO INDICATE THAT.
| SECTION 2 COMPOSITION/INFORMATION ON INGREDIENTS | |
HAZARDOUS COMPONENTS (SPECIFIC CAS NO. OSHA PEL ACGIH-TLV
CHEMICAL IDENTITY, COMMON NAME(S)
ACETONE 67-64-1 TWA 750 PPM TWA 750 PPM
ETHANOL 64-17-5 TWA 1000 PPM TWA 1000 PPM
N-PROPYL ACETATE 109-60-4 TWA 200 PPM TWA 200 PPM
ISOPROPANOL 67-63-0 TWA 400 PPM TWA 400 PPM
HAZARDOUS COMPONENTS (SPECIFIC OTHER LIMITS
CHEMICAL IDENTITY, COMMON NAME(S) RECOMMENDED %
ACETONE NO DATA 60-70
ETHANOL NO DATA 30-40
N-PROPYL ACETATE NO DATA 1-5
ISOPROPANOL NO DATA 1-5
| SECTION 3 HAZARDS IDENTIFICATION | |
EMERGENCY OVERVIEW - CLEAR THIN VISCOSITY LIQUID WITH SWEET SOLVENT ODOR.
DANGER!
EXTREMELY FLAMMABLE LIQUID AND VAPOR. VAPOR MAY CAUSE FLASH FIRE. KEEP AWAY
FROM HEAT SPARKS AND FLAMES. USE ONLY WITH ADEQUATE VENTILATION. HARMFUL IF
SWALLOWED. IF SWALLOWED DO NOT INDUCE VOMITING. GET IMMEDIATE MEDICAL
ATTENTION. MAY CAUSE EYE, SKIN AND RESPIRATORY TRACT IRRITATION.
POTENTIAL HEALTH EFFECTS:
EYES: LIQUID IS MODERATELY IRRITATING TO THE EYES.
SKIN: LIQUID IS MILDLY IRRITATING TO THE SKIN.
INGESTION: INGESTION OF LIQUID MAY CAUSE VOMITING.
INHALATION:
HIGH CONCENTRATION OF VAPORS MAY PRODUCE IRRITATION OF THE RESPIRATORY
TRACT, HEADACHE, DIZZINESS, AND NAUSEA.
CHRONIC HEALTH EFFECTS:
PROLONGED OR REPEATED CONTACT MAY CAUSE SKIN SENSITIZATION OR DERMATITIS.
REPORTS HAVE ASSOCIATED REPEATED AND PROLONGED OCCUPATIONAL OVEREXPOSURE TO
SOLVENTS WITH IRREVERSIBLE BRAIN AND NERVOUS SYSTEM DAMAGE. INTENTIONAL
MISUSE BY DELIBERATELY CONCENTRATING OR INHALING THIS PRODUCT MAY BE
HARMFUL OR FATAL.
| SECTION 4 FIRST AID MEASURES | |
EYES - IMMEDIATELY FLUSH EYES WITH PLENTY OF WATER FOR AT LEAST 15 MINUTES.
GET MEDICAL ATTENTION IMMEDIATELY.
INHALATION - REMOVE TO FRESH AIR. IF NOT BREATHING, GIVE ARTIFICIAL
RESPIRATION. IF BREATHING IS DIFFICULT, GIVE OXYGEN. GET MEDICAL ATTENTION
IMMEDIATELY.
SKIN - FLUSH SKIN WITH PLENTY OF WATER. REMOVE CONTAMINATED CLOTHING AND
SHOES.
INGESTION - IF LARGE QUANTITIES OF THIS MATERIAL ARE SWALLOWED, GET
IMMEDIATE MEDICAL ATTENTION. DO NOT INDUCE VOMITING. NEVER GIVE ANYTHING BY
MOUTH TO AN UNCONSCIOUS PERSON.
| SECTION 5 FIRE FIGHTING MEASURES | |
FLASH POINT (METHOD USED): -4 DEG. F
FLAMMABLE LIMITS:
LEL: 1.70
UEL: 21.20
EXTINGUISHING MEDIA - USE ALCOHOL FOAM, DRY CHEMICAL OR CO2. USE WATER
SPRAY TO COOL FIRE-EXPOSED CONTAINERS AND TO PROTECT PERSONNEL.
SPECIAL FIRE FIGHTING PROCEDURES - WATER MAY BE INEFFECTIVE. WATER MAY BE
USED TO KEEP FIRE-EXPOSED CONTAINERS COOL UNTIL FIRE IS OUT. PREVENT SPILL
FROM ENTERING DRAINS, SEWERS, STREAMS OR OTHER BODIES OF WATER. IF RUN-OFF
OCCURS, NOTIFY PROPER AUTHORITIES. DO NOT ENTER CONFINED FIRE SPACE WITHOUT
FULL BUNKER GEAR (HELMET WITH FACE SHIELD, BUNKER COATS, GLOVES AND RUBBER
BOOTS), INCLUDING A POSITIVE PRESSURE NIOSH APPROVED SELF-CONTAINED
BREATHING APPARATUS.
UNUSUAL FIRE AND EXPLOSION HAZARDS - VAPORS ARE HEAVIER THAN AIR AND MAY
TRAVEL ALONG GROUND, OR BE MOVED BY VENTILATION AND BE IGNITED BY IGNITION
SOURCE.
| SECTION 6 ACCIDENTAL RELEASE MEASURES | |
SMALL SPILL:
ABSORB LIQUID WITH NON-COMBUSTIBLE FLOOR ABSORBENT AND PLACE IN NON-LEAKING
CONTAINER; SEAL PROPERLY AND DISPOSE OF PROPERLY IN COMPLIANCE WITH
FEDERAL, STATE, AND LOCAL REGULATIONS.
LARGE SPILL:
EVACUATE AREA OF UNPROTECTED PERSONNEL. ELIMINATE ALL IGNITION SOURCES.
STOP SPILL AT SOURCE IF SAFE TO DO SO. HANDLING EQUIPMENT MUST BE GROUNDED
TO PREVENT SPARKING. PREVENT SPILL FROM ENTERING DRAINS, SEWERS, STREAMS OR
OTHER BODIES OF WATER. IF RUN-OFF OCCURS, NOTIFY PROPER AUTHORITIES. PUMP
OR VACUUM TRANSFER SPILLED PRODUCT TO CLEAN CONTAINERS FOR RECOVERY.
ABSORB UNRECOVERABLE PRODUCT. TRANSFER CONTAMINATED ABSORBENT, SOIL AND
OTHER MATERIALS TO CONTAINERS FOR DISPOSAL. DISPOSE OF PROPERLY IN
COMPLIANCE WITH FEDERAL, STATE, AND LOCAL REGULATIONS.
| SECTION 7 HANDLING AND STORAGE | |
HANDLING:
EMPTY CONTAINERS RETAIN RESIDUE (LIQUID AND/OR VAPOR) AND CAN BE DANGEROUS.
DO NOT PRESSURIZE, CUT, WELD, BRAZE, SOLDER, DRILL, GRIND, OR EXPOSE SUCH
CONTAINERS TO HEAT, SPARKS, FLAMES, STATIC ELECTRICITY, OR OTHER SOURCES OF
IGNITION. MANY HOT ORGANIC CHEMICAL VAPORS OR MISTS ARE SUSCEPTIBLE TO
SUDDEN SPONTANEOUS COMBUSTION WHEN MIXED WITH AIR. IGNITION MAY OCCUR AT
TEMPERATURES BELOW THOSE PUBLISHED IN THE LITERATURE AS "AUTOIGNITION" OR
IGNITION TEMPERATURES. IGNITION TEMPERATURES DECREASE WITH INCREASING VAPOR
VOLUME AND VAPOR VOLUME AND VAPOR/AIR CONTACT TIME, AND ARE INFLUENCED BY
PRESSURE CHANGES. IGNITION OF ORGANIC CHEMICAL VAPORS MAY OCCUR AT TYPICAL
ELEVATED-TEMPERATURE PROCESS CONDITIONS, ESPECIALLY IN PROCESSES OPERATING
UNDER VACUUM IF SUBJECTED TO SUDDEN INGRESS OF AIR, OR OUTSIDE PROCESS
EQUIPMENT OPERATING UNDER ELEVATED PRESSURE IF SUDDEN ESCAPE OF VAPORS OR
MISTS TO THE ATMOSPHERE OCCURS. ANY PROPOSED USE OF THIS PRODUCT IN
ELEVATED-TEMPERATURE PROCESSES SHOULD BE THOROUGHLY EVALUATED TO ASSURE
THAT SAFE OPERATING CONDITIONS ARE ESTABLISHED AND MAINTAINED.
STORAGE:
KEEP AWAY FROM HEAT, SPARKS AND OPEN FLAMES. KEEP OUT OF REACH OF CHILDREN.
KEEP CONTAINER TIGHTLY SEALED WHEN NOT IN USE. STORE IN COOL,
WELL-VENTILATED PLACE AWAY FROM INCOMPATIBLE MATERIALS. ALL 5 GALLON PAILS
AND LARGER METAL CONTAINERS SHOULD BE GROUNDED AND/OR BONDED WHEN MATERIAL
IS TRANSFERRED.
| SECTION 8 EXPOSURE CONTROLS/PERSONAL PROTECTION | |
RESPIRATORY PROTECTION (SPECIFY TYPE) - NOT USUALLY NECESSARY. USE WITH
ADEQUATE VENTILATION. USE NIOSH/MSHA APPROVED RESPIRATOR IF PELS OR TLVS
ARE EXCEEDED.
ENGINEERING CONTROLS:
LOCAL EXHAUST: NOT USUALLY NEEDED
MECHANICAL (GENERAL): YES
SPECIAL: NONE
OTHER: NONE
PROTECTIVE GLOVES - CHEMICAL RESISTANT RUBBER GLOVES IF SKIN CONTACT IS
POSSIBLE (CONSULT YOUR SAFETY EQUIPMENT SUPPLIER).
EYE PROTECTION - SAFETY GLASSES WITH SIDE SHIELDS. WEAR CHEMICAL SPLASH
GOGGLES IN COMPLIANCE WITH OSHA REGULATIONS IF SPLASHING IS POSSIBLE.
OTHER PROTECTIVE CLOTHING OR EQUIPMENT - NOT USUALLY NECESSARY. FOR BULK
MATERIAL, IF DIRECT CONTACT IS POSSIBLE, WEAR APRON, BOOTS, FACE SHIELD,
ETC. AS NEEDED.
WORK/HYGIENIC PRACTICES - FOLLOW LABEL INSTRUCTIONS. WASH HANDS AFTER USE
AND BEFORE EATING, DRINKING, SMOKING, USING RESTROOMS, ETC.
| SECTION 9 PHYSICAL AND CHEMICAL PROPERTIES | |
BOILING POINT: 133 DEG. F
VAPOR PRESSURE (MM-HG @ 70 DEG. F): NO DATA
VAPOR DENSITY (AIR=1): GREATER THAN ONE (1)
SOLUBILITY IN WATER: SOLUBLE
SPECIFIC GRAVITY (H2O=1) @ 70 DEG. F: 0.79
MELTING POINT: NO DATA
EVAPORATION RATE (BUTYL ACETATE=1): GREATER THAN ONE (1)
pH: NO DATA
APPEARANCE AND ODOR - CLEAR THIN VISCOSITY LIQUID WITH SWEET SOLVENT ODOR.
VOC: THIS PRODUCT CONTAINS 287 GRAMS PER LITER OR 36.23 % BY WEIGHT VOC'S.
| SECTION 10 STABILITY AND REACTIVITY | |
CHEMICAL STABILITY:
UNSTABLE: ( )
STABLE: (X)
CONDITIONS TO AVOID - NONE KNOWN.
INCOMPATIBILITY (MATERIALS TO AVOID) - STRONG OXIDIZING AND REDUCING
AGENTS, STRONG ALKALIES AND STRONG ACIDS.
HAZARDOUS DECOMPOSITION OR BYPRODUCTS - CARBON DIOXIDE, CARBON MONOXIDE,
SMOKE, SOOT AND VARIOUS ORGANIC OXIDATION BY-PRODUCTS.
HAZARDOUS POLYMERIZATION:
MAY OCCUR ( )
WILL NOT OCCUR (X)
CONDITIONS TO AVOID - NO DATA
| SECTION 11 TOXICOLOGICAL INFORMATION | |
ACETONE
ORAL LD50 (RAT): 8.5-10.70 G/KG
DERMAL LD50 (RABBIT): 20 G/KG
INHALATION LC50 (RAT): NO DATA
PLEASE REFER TO SECTION 3 FOR AVAILABLE INFORMATION ON POTENTIAL HEALTH
EFFECTS.
| SECTION 12 ECOLOGICAL INFORMATION | |
NO SPECIFIC ECOLOGICAL DATA ARE AVAILABLE FOR THIS PRODUCT. PLEASE REFER TO
SECTION 6 FOR INFORMATION REGARDING ACCIDENTAL RELEASES AND SECTION 15 FOR
REGULATORY REPORTING INFORMATION.
| SECTION 13 DISPOSAL CONSIDERATIONS | |
DISPOSE OF IN ACCORDANCE WITH ALL APPLICABLE LOCAL, STATE AND FEDERAL
REGULATIONS.
| SECTION 14 TRANSPORT INFORMATION | |
(NOT MEANT TO BE ALL INCLUSIVE)
DOMESTIC HIGHWAY (CONTAINERS </=1 QUART ARE ORM-D)
PROPER SHIPPING NAME: PAINT RELATED MATERIAL
HAZARD CLASS/SUBSIDIARY HAZARD: 3
UN/NA NO.: UN1263
PACKING GROUP: II
LABEL REQUIRED: FLAMMABLE LIQUID (3)
DOMESTIC AIR SHIPMENTS: VARIES
PROPER SHIPPING NAME: NO DATA
HAZARD CLASS/SUBSIDIARY HAZARD: NO DATA
UN/NA NO.: NO DATA
PACKING GROUP: NO DATA
LABEL REQUIRED: NO DATA
| SECTION 15 REGULATORY INFORMATION | |
(NOT MEANT TO BE ALL INCLUSIVE - SELECTED REGULATIONS REPRESENTED)
U.S. FEDERAL REGULATIONS:
CARCINOGENICITY:
NTP?
NO
IARC MONOGRAPHS?
NO
OSHA REGULATED?
NO
OSHA:
HAZARDOUS BY DEFINITION OF HAZARD COMMUNICATION STANDARD (29 CFR
1910.1200).
SECTION 313:
THIS PRODUCT DOES NOT CONTAIN INGREDIENTS WHICH ARE LISTED AND MAY REQUIRE
REPORTING UNDER SARA TITLE III SEC. 313 IF USED OVER THE THRESHOLD
REPORTING QUANTITY. THIS INFORMATION MUST BE INCLUDED IN ALL MSDSS THAT ARE
COPIED AND DISTRIBUTED FOR THIS MATERIAL.
STATE REGULATIONS:
CALIFORNIA PROPOSITION 65:
THIS PRODUCT IS NOT KNOWN TO CONTAIN ANY MATERIAL LISTED UNDER CALIFORNIA'S
PROPOSITION 65.
| SECTION 16 OTHER INFORMATION | |
MSDS STATUS:
REVISED SECTION(S):
WARNING!
THE USE OF THIS PRODUCT IS BEYOND THE CONTROL OF THE MANUFACTURER AND
DISTRIBUTOR; THEREFORE, NO GUARANTEE, EXPRESSED OR IMPLIED, IS MADE AS TO
THE EFFECTS OF SUCH OR THE RESULTS TO BE OBTAINED IF NOT USED IN ACCORDANCE
WITH DIRECTIONS OR ESTABLISHED SAFE PRACTICE. THE USER MUST ASSUME ALL
RESPONSIBILITY, INCLUDING INJURY OR DAMAGE, RESULTING FROM ITS MISUSE AS
SUCH, OR IN COMBINATION WITH OTHER MATERIALS. THE MANUFACTURER AND
DISTRIBUTOR WARRANT ONLY THAT THIS PRODUCT MEETS THE SPECIFICATIONS FOR
SUCH PRODUCT. THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR
IMPLIED, AS TO DESCRIPTION, QUALITY, MERCHANTABILITY, FITNESS FOR ANY
PARTICULAR PURPOSE, PRODUCTIVENESS, OR ANY OTHER MATTER OF THIS PRODUCT.
THE MANUFACTURER AND DISTRIBUTOR SHALL BE IN NO WAY RESPONSIBLE FOR THE
PROPER USE OF THIS PRODUCT. THE SOLE AND EXCLUSIVE REMEDY AGAINST THE
MANUFACTURER AND DISTRIBUTOR FOR BREACH OF WARRANTY SHALL BE REIMBURSEMENT
OF THE PURCHASE PRICE OF THE PRODUCT IN THE EVENT THAT A DEFECTIVE
CONDITION OF THE PRODUCT SHALL BE FOUND TO EXIST. NO OTHER REMEDY
(INCLUDING BUT NOT LIMITED TO INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR
INJURY TO PERSON OR PROPERTY OR ANY OTHER INCIDENTAL OR CONSEQUENTIAL LOSS)
SHALL BE AVAILABLE.
FORMULA: 8947