| Common Name: | HIGH PERFORMANCE INDUSTRIAL DTM URETHANE MASTIC, 9822383, 9822419, 9825383, 9825 |
| Manufacturer: | RUST-OLEUM |
| SDS Revision Date: | 11/21/2006 |
| SDS Format: | No Format Specified |
| Item Number(s): | 2NU55, 2NU56, 2NU57, 2NU58, 2NU59, 2NU60, 2NU61, 4CH88, 4CH90, 4CH91, 4CH92, 4CH94, 4CH95, 4CH96, 4CH97, 4CH98, 4CH99, 4CJ26, 4CJ28, 4CJ29, 4CJ30, 4CJ31, 4CJ32, 4CJ34, 4CJ35, 4CJ36, 5H924 |
| Manufacturer Model Number(s): | 5265, 9822-383, 9822-419, 9825-383, 9825-419, 9833-383, 9833-419, 9844-383, 9844-419, 9845-419, 9865-383, 9865-419, 9868-383, 9868-419, 9871-383, 9871-419, 9879-383, 9879-419, 9882-383, 9882-419, 9886-383, 9886-419, V2125 |
SDS Table of Contents
Click the desired link below to jump directly to that section in the SDS.
MATERIAL SAFETY DATA SHEET
24 HOUR ASSISTANCE:
1-847-367-7700
RUST-OLEUM CORP.
WWW.RUSTOLEUM.COM
| SECTION 1 - CHEMICAL PRODUCT / COMPANY INFORMATION |  |
PRODUCT NAME:
RUST-OLEUM HIGH PERFORMANCE INDUSTRIAL DTM URETHANE MASTIC
IDENTIFICATION NUMBER:
9822383, 9822419, 9825383, 9825419, 9833383, 9833419, 9844383, 9844419,
9845383, 9845419, 9865383, 9865419, 9868383, 9868419, 9871383, 9871419,
9879419, 9882383, 9882419, 9886383, 9886419, 9892383,9892419
PRODUCT USE/CLASS: TOPCOAT/URETHANE MASTIC
SUPPLIER:
RUST-OLEUM CORPORATION
11 HAWTHORN PARKWAY
VERNON HILLS, IL 60061
USA
PREPARER: REGULATORY DEPARTMENT
REVISION DATE: 11/21/2006
MANUFACTURER:
RUST-OLEUM CORPORATION
11 HAWTHORN PARKWAY
VERNON HILLS, IL 60061
USA
| SECTION 2 - COMPOSITION / INFORMATION ON INGREDIENTS | |
CHEMICAL NAME CAS NUMBER WEIGHT % LESS THAN
TITANIUM DIOXIDE 13463-67-7 25.0
METHYL N-AMYL KETONE 110-43-0 25.0
N-BUTYL ACETATE 123-86-4 15.0
ETHYL 3-ETHOXYPROPIONATE 763-69-9 5.0
PIGMENT BLACK 7 1333-86-4 5.0
CHEMICAL NAME ACGIH TLV- ACGIH TLV- OSHA PEL- OSHA PEL-
TWA STEL TWA CEILING
TITANIUM DIOXIDE 10 MG/M3 N.E. 10 MG/M3 N.E.
METHYL N-AMYL KETONE 50 PPM 100 PPM 100 PPM N.E.
N-BUTYL ACETATE 150 PPM 200 PPM 150 PPM N.E.
ETHYL 3-ETHOXYPROPIONATE N.E. N.E. N.E. N.E.
PIGMENT BLACK 7 3.5 MG/M3 N.E. 3.5 MG/M3 N.E.
| SECTION 3 - HAZARDS IDENTIFICATION | |
EMERGENCY OVERVIEW:
HIGH VAPOR CONCENTRATIONS CAN IRRITATE EYES, NOSE AND RESPIRATORY PASSAGES.
CAUSES NOSE AND THROAT IRRITATION. HARMFUL IF INHALED. MAY AFFECT THE BRAIN
OR NERVOUS SYSTEM CAUSING DIZZINESS, HEADACHE OR NAUSEA. FLAMMABLE LIQUID
AND VAPOR. HARMFUL IF SWALLOWED. CAUSES EYE IRRITATION.
EFFECTS OF OVEREXPOSURE - EYE CONTACT: CAUSES EYE IRRITATION.
EFFECTS OF OVEREXPOSURE - SKIN CONTACT:
PROLONGED OR REPEATED SKIN CONTACT MAY CAUSE IRRITATION.
EFFECTS OF OVEREXPOSURE - INHALATION:
HIGH VAPOR CONCENTRATIONS ARE IRRITATING TO THE EYES, NOSE, THROAT AND
LUNGS. MAY CAUSE HEADACHES AND DIZZINESS. AVOID BREATHING VAPORS OR MISTS.
HARMFUL IF INHALED.
EFFECTS OF OVEREXPOSURE - INGESTION:
ASPIRATION HAZARD IF SWALLOWED; CAN ENTER LUNGS AND CAUSE DAMAGE. HARMFUL
IF SWALLOWED.
EFFECTS OF OVEREXPOSURE - CHRONIC HAZARDS:
REPORTS HAVE ASSOCIATED REPEATED AND PROLONGED OCCUPATIONAL OVEREXPOSURE TO
SOLVENTS WITH PERMANENT BRAIN AND NERVOUS SYSTEM DAMAGE.
CONTAINS CARBON BLACK. CHRONIC INFLAMMATION, LUNG FIBROSIS, AND LUNG TUMORS
HAVE BEEN OBSERVED IN SOME RATS EXPERIMENTALLY EXPOSED FOR LONG PERIODS OF
TIME TO EXCESSIVE CONCENTRATIONS OF CARBON BLACK AND SEVERAL INSOLUBLE FINE
DUST PARTICLES. TUMORS HAVE NOT BEEN OBSERVED IN OTHER ANIMAL SPECIES
(I.E., MOUSE AND HAMPSTER) UNDER SIMILAR CIRCUMSTANCES AND STUDY CONDITIONS.
EPIDEMIOLOGICAL STUDIES OF NORTH AMERICAN WORKERS SHOW NO EVIDENCE OF
CLINICALLY SIGNIFICANT ADVERSE HEALTH EFFECTS DUE TO OCCUPATIONAL EXPOSURE
TO CARBON BLACK. CARBON BLACK IS LISTED AS A GROUP 2B-"POSSIBLY CARCINOGENIC
TO HUMANS" BY IARC AND IS PROPOSED TO BE LISTED AS A4- "NOT CLASSIFIED AS A
HUMAN CARCINOGEN" BY THE AMERICAN CONFERENCE OF GOVERNMENTAL INDUSTRIAL
HYGIENISTS. SIGNIFICANT EXPOSURE IS NOT ANTICIPATED DURING BRUSH APPLICATION
OR DRYING. RISK OF OVEREXPOSURE DEPENDS ON DURATION AND LEVEL OF EXPOSURE TO
DUST FROM REPEATED SANDING OF SURFACES OR SPRAY MIST AND THE ACTUAL
CONCENTRATION OF CARBON BLACK IN THE FORMULA.
PRIMARY ROUTE(S) OF ENTRY:
SKIN CONTACT, SKIN ABSORPTION, INHALATION, EYE CONTACT
| SECTION 4 - FIRST AID MEASURES | |
FIRST AID - EYE CONTACT:
HOLD EYELIDS APART AND FLUSH WITH PLENTY OF WATER FOR AT LEAST 15 MINUTES.
GET MEDICAL ATTENTION.
FIRST AID - SKIN CONTACT:
WASH WITH SOAP AND WATER. GET MEDICAL ATTENTION IF IRRITATION DEVELOPS OR
PERSISTS.
FIRST AID - INHALATION:
REMOVE TO FRESH AIR. IF NOT BREATHING, GIVE ARTIFICIAL RESPIRATION. IF
BREATHING IS DIFFICULT, GIVE OXYGEN. GET IMMEDIATE MEDICAL ATTENTION.
FIRST AID - INGESTION:
ASPIRATION HAZARD:
DO NOT INDUCE VOMITING OR GIVE ANYTHING BY MOUTH BECAUSE THIS MATERIAL CAN
ENTER THE LUNGS AND CAUSE SEVERE LUNG DAMAGE. GET IMMEDIATE MEDICAL
ATTENTION.
| SECTION 5 - FIRE FIGHTING MEASURES | |
FLASH POINT: 95 F (SETAFLASH)
LOWER EXPLOSIVE LIMIT: 0.6 %
UPPER EXPLOSIVE LIMIT: 19.9 %
EXTINGUISHING MEDIA: DRY CHEMICAL, FOAM, WATER FOG
UNUSUAL FIRE AND EXPLOSION HAZARDS:
VAPORS MAY FORM EXPLOSIVE MIXTURES WITH AIR. VAPORS CAN TRAVEL TO A SOURCE
OF IGNITION AND FLASH BACK. ISOLATE FROM HEAT, ELECTRICAL EQUIPMENT, SPARKS
AND OPEN FLAME.
SPECIAL FIREFIGHTING PROCEDURES:
EVACUATE AREA AND FIGHT FIRE FROM A SAFE DISTANCE. WATER MAY BE USED TO COOL
CLOSED CONTAINERS TO PREVENT PRESSURE BUILDUP AND POSSIBLE AUTOIGNITION OR
EXPLOSION.
| SECTION 6 - ACCIDENTAL RELEASE MEASURES | |
STEPS TO BE TAKEN IF MATERIAL IS RELEASED OR SPILLED:
ELIMINATE ALL IGNITION SOURCES; USE EXPLOSION-PROOF EQUIPMENT. PLACE
MATERIAL IN A CONTAINER AND DISPOSE OF ACCORDING TO LOCAL, PROVINCIAL, STATE
AND FEDERAL REGULATIONS. CONTAIN SPILLED LIQUID WITH SAND OR EARTH. DO NOT
USE COMBUSTIBLE MATERIALS SUCH AS SAWDUST.
| SECTION 7 - HANDLING AND STORAGE | |
HANDLING:
WASH HANDS BEFORE EATING. WASH THOROUGHLY AFTER HANDLING. USE WITH ADEQUATE
VENTILATION. FOLLOW ALL MSDS/LABEL PRECAUTIONS EVEN AFTER CONTAINER IS
EMPTIED BECAUSE IT MAY RETAIN PRODUCT RESIDUES.
STORAGE:
KEEP CONTAINERS TIGHTLY CLOSED. ISOLATE FROM HEAT, ELECTRICAL EQUIPMENT,
SPARKS AND OPEN FLAME. KEEP CONTAINER CLOSED WHEN NOT IN USE. KEEP AWAY FROM
HEAT, SPARKS, FLAME AND SOURCES OF IGNITION.
| SECTION 8 - EXPOSURE CONTROLS / PERSONAL PROTECTION | |
ENGINEERING CONTROLS:
PREVENT BUILD-UP OF VAPORS BY OPENING ALL DOORS AND WINDOWS TO ACHIEVE
CROSS-VENTILATION. USE PROCESS ENCLOSURES, LOCAL EXHAUST VENTILATION, OR
OTHER ENGINEERING CONTROLS TO CONTROL AIRBORNE LEVELS BELOW RECOMMENDED
EXPOSURE LIMITS.
RESPIRATORY PROTECTION:
A NIOSH/MSHA APPROVED AIR PURIFYING RESPIRATOR WITH AN ORGANIC VAPOR
CARTRIDGE OR CANISTER MAY BE PERMISSIBLE UNDER CERTAIN CIRCUMSTANCES WHERE
AIRBORNE CONCENTRATIONS ARE EXPECTED TO EXCEED EXPOSURE LIMITS.
PROTECTION PROVIDED BY AIR PURIFYING RESPIRATORS IS LIMITED. USE A POSITIVE
PRESSURE AIR SUPPLIED RESPIRATOR IF THERE IS ANY POTENTIAL FOR AN
UNCONTROLLED RELEASE, EXPOSURE LEVELS ARE NOT KNOWN, OR ANY OTHER
CIRCUMSTANCES WHERE AIR PURIFYING RESPIRATORS MAY NOT PROVIDE ADEQUATE
PROTECTION. A RESPIRATORY PROTECTION PROGRAM THAT MEETS OSHA 1910.134 AND
ANSI Z88.2 REQUIREMENTS MUST BE FOLLOWED WHENEVER WORKPLACE CONDITIONS
WARRANT A RESPIRATOR'S USE.
SKIN PROTECTION:
NITRILE OR NEOPRENE GLOVES MAY AFFORD ADEQUATE SKIN PROTECTION. USE
IMPERVIOUS GLOVES TO PREVENT SKIN CONTACT AND ABSORPTION OF THIS MATERIAL
THROUGH THE SKIN.
EYE PROTECTION:
USE SAFETY EYEWEAR DESIGNED TO PROTECT AGAINST SPLASH OF LIQUIDS.
OTHER PROTECTIVE EQUIPMENT:
REFER TO SAFETY SUPERVISOR OR INDUSTRIAL HYGIENIST FOR FURTHER INFORMATION
REGARDING PERSONAL PROTECTIVE EQUIPMENT AND ITS APPLICATION.
HYGIENIC PRACTICES:
WASH THOROUGHLY WITH SOAP AND WATER BEFORE EATING, DRINKING OR SMOKING.
| SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES | |
BOILING RANGE: 200 - 900 F
VAPOR DENSITY: HEAVIER THAN AIR
ODOR: SOLVENT LIKE
ODOR THRESHOLD: ND
APPEARANCE: LIQUID
EVAPORATION RATE: SLOWER THAN ETHER
SOLUBILITY IN H2O: SLIGHT
FREEZE POINT: ND
SPECIFIC GRAVITY: 1.3200
VAPOR PRESSURE:
pH: NE
PHYSICAL STATE: LIQUID
(SEE SECTION 16 FOR ABBREVIATION LEGEND)
| SECTION 10 - STABILITY AND REACTIVITY | |
CONDITIONS TO AVOID: AVOID ALL POSSIBLE SOURCES OF IGNITION.
INCOMPATIBILITY:
INCOMPATIBLE WITH STRONG OXIDIZING AGENTS, STRONG ACIDS AND STRONG ALKALIES.
HAZARDOUS DECOMPOSITION:
WHEN HEATED TO DECOMPOSITION, IT EMITS ACRID SMOKE AND IRRITATING FUMES. BY
OPEN FLAME, CARBON MONOXIDE AND CARBON DIOXIDE.
HAZARDOUS POLYMERIZATION: WILL NOT OCCUR UNDER NORMAL CONDITIONS.
STABILITY: THIS PRODUCT IS STABLE UNDER NORMAL STORAGE CONDITIONS.
| SECTION 11 - TOXICOLOGICAL INFORMATION | |
PRODUCT LD50: ND
PRODUCT LC50: ND
CHEMICAL NAME LD50 LC50
TITANIUM DIOXIDE >7500 MG/KG (ORAL, RAT) N.D.
METHYL N-AMYL KETONE 1600 MG/KG (ORAL, RAT) N.D.
N-BUTYL ACETATE 13100 MG/KG (ORAL, RAT) 2000 PPM (INH 4 HR, RAT)
ETHYL 3-ETHOXYPROPIONATE 4.3 G/KG (ORAL, RAT) >1000 PPM (6 HR INH, RAT)
PIGMENT BLACK 7 >8000 MG/KG (ORAL, RAT) N.D.
| SECTION 12 - ECOLOGICAL INFORMATION | |
ECOLOGICAL INFORMATION: PRODUCT IS A MIXTURE OF LISTED COMPONENTS.
| SECTION 13 - DISPOSAL INFORMATION | |
DISPOSAL INFORMATION:
DISPOSE OF MATERIAL IN ACCORDANCE TO LOCAL, STATE AND FEDERAL REGULATIONS
AND ORDINANCES. DO NOT ALLOW TO ENTER STORM DRAINS OR SEWER SYSTEMS.
| SECTION 14 - TRANSPORTATION INFORMATION | |
DOT PROPER SHIPPING NAME: PAINT
DOT TECHNICAL NAME:
DOT HAZARD CLASS: 3
DOT UN/NA NUMBER: UN1263
PACKING GROUP: III
HAZARD SUBCLASS:
RESP. GUIDE PAGE: 128
| SECTION 15 - REGULATORY INFORMATION | |
CERCLA - SARA HAZARD CATEGORY:
THIS PRODUCT HAS BEEN REVIEWED ACCORDING TO THE EPA "HAZARD CATEGORIES"
PROMULGATED UNDER SECTIONS 311 AND 312 OF THE SUPERFUND AMENDMENT AND
REAUTHORIZATION ACT OF 1986 (SARA TITLE III) AND IS CONSIDERED, UNDER
APPLICABLE DEFINITIONS, TO MEET THE FOLLOWING CATEGORIES:
IMMEDIATE HEALTH HAZARD, CHRONIC HEALTH HAZARD, FIRE HAZARD
SARA SECTION 313:
LISTED BELOW ARE THE SUBSTANCES (IF ANY) CONTAINED IN THIS PRODUCT THAT ARE
SUBJECT TO THE REPORTING REQUIREMENTS OF SECTION 313 OF TITLE III OF THE
SUPERFUND AMENDMENT AND REAUTHORIZATION ACT OF 1986 AND 40 CFR PART 372:
NONE KNOWN
TOXIC SUBSTANCES CONTROL ACT:
LISTED BELOW ARE THE SUBSTANCES (IF ANY) CONTAINED IN THIS PRODUCT THAT ARE
SUBJECT TO THE REPORTING REQUIREMENTS OF TSCA 12(B) IF EXPORTED FROM THE
UNITED STATES: NONE KNOWN
U.S. STATE REGULATIONS: AS FOLLOWS
NEW JERSEY RIGHT-TO-KNOW:
THE FOLLOWING MATERIALS ARE NON-HAZARDOUS, BUT ARE AMONG THE TOP FIVE
COMPONENTS IN THIS PRODUCT.
CHEMICAL NAME CAS NUMBER
POTASSIUM ALUMINOSILICATE 37244-96-5
MODIFIED ACRYLIC COPOLYMER PROPRIETARY
PENNSYLVANIA RIGHT-TO-KNOW:
THE FOLLOWING NON-HAZARDOUS INGREDIENTS ARE PRESENT IN THE PRODUCT AT
GREATER THAN 3%.
CHEMICAL NAME CAS NUMBER
POTASSIUM ALUMINOSILICATE 37244-96-5
MODIFIED ACRYLIC COPOLYMER PROPRIETARY
POLYESTER POLYOL COPOLYMER PROPRIETARY
RED IRON OXIDE 1332-37-2
PIGMENT YELLOW 194 82199-12-0
YELLOW IRON OXIDE 51274-00-1
ACRYLIC POLYOL COPOLYMER PROPRIETARY
CALIFORNIA PROPOSITION 65:
THESE PRODUCTS CONTAIN NO KNOWN CHEMICALS KNOWN BY THE STATE OF CALIFORNIA
TO CAUSE CANCER.
THESE PRODUCTS CONTAIN NO KNOWN CHEMICALS KNOWN BY THE STATE OF CALIFORNIA
TO CAUSE BIRTH DEFECTS OR OTHER REPRODUCTIVE HARM.
INTERNATIONAL REGULATIONS: AS FOLLOWS
CANADIAN WHMIS:
THIS MSDS HAS BEEN PREPARED IN COMPLIANCE WITH CONTROLLED PRODUCT
REGULATIONS EXCEPT FOR THE USE OF THE 16 HEADINGS.
CANADIAN WHMIS CLASS: B2, D2B
| SECTION 16 - OTHER INFORMATION | |
HMIS RATINGS:
HEALTH 2
FLAMMABILITY 3
REACTIVITY 0
PERSONAL PROTECTION X
VOLATILE ORGANIC COMPOUNDS, G/L: 340 MAX
REASON FOR REVISION:
LEGEND:
N.A. - NOT APPLICABLE
N.E. - NOT ESTABLISHED
N.D. - NOT DETERMINED
THE INFORMATION CONTAINED ON THIS MSDS HAS BEEN CHECKED AND SHOULD BE
ACCURATE. HOWEVER, IT IS THE RESPONSIBILITY OF THE USER TO COMPLY WITH ALL
FEDERAL, STATE, AND LOCAL LAWS AND REGULATIONS.