| Common Name: | TOUGH GUY DUST MOP TREATMENT, 2DCC4 |
| Manufacturer: | W.W. GRAINGER |
| SDS Revision Date: | 8/30/2007 |
| SDS Format: | No Format Specified |
| Item Number(s): | 2DCC4 |
| Manufacturer Model Number(s): |
SDS Table of Contents
Click the desired link below to jump directly to that section in the SDS.
MATERIAL SAFETY DATA SHEET
HMIS(R*):
HEALTH 1
FLAMMABILITY 0
REACTIVITY 0
PERSONAL PROTECTION A
IDENTITY: TOUGH GUY DUST MOP TREATMENT
PART NUMBER: 2DCC4
NOTE:
BLANK SPACES ARE NOT PERMITTED. IF ANY ITEM IS NOT APPLICABLE, OR NO
INFORMATION IS AVAILABLE, THE SPACE MUST BE MARKED TO INDICATE THAT.
| SECTION 1: COMPANY IDENTIFICATION |  |
MANUFACTURED FOR: W.W. GRAINGER, INC.
ADDRESS (NUMBER, STREET, CITY, STATE, AND ZIP CODE):
100 GRAINGER PARKWAY
LAKE FOREST, IL 60045
EMERGENCY TELEPHONE NUMBER: 1-800-228-5635
TELEPHONE NUMBER FOR INFORMATION: 1-847-535-5400
SIGNATURE OF PREPARER (OPTIONAL):
| SECTION 2: INGREDIENTS/IDENTITY INFORMATION | |
COMPONENTS CAS NO. OSHA ACGIH- OTHER LIMITS %
(CHEMICAL IDENTITY, PEL TLV RECOMMENDED (OPT.)
COMMON NAME(S))
WATER 7732-18-5 NONE NONE 60 - 100%
ISOBUTANE 75-28-5 800 800 5 - 10%
PPM PPM
PROPANE 74-98-6 1000 ASPHYXIANT 1 - 5%
PPM
ANY SUBSTANCE LISTED AS HAZARDOUS BY THE STATES OF CALIFORNIA, FLORIDA,
ILLINOIS, MICHIGAN, NEW JERSEY, OHIO, PENNSYLVANIA OR TEXAS IS DESCRIBED
ABOVE IF KNOWN PRESENT IN REGULATED CONCENTRATIONS.
| SECTION 3: HAZARDS IDENTIFICATION | |
ROUTE(S) OF ENTRY:
EYES?: YES
INHALATION?: NO
SKIN?: NO
INGESTION?: YES
ACUTE HEALTH HAZARDS:
CAUTION. MAY CAUSE EYE AND SKIN IRRITATION. CONTENTS UNDER PRESSURE.
FOLLOW GOOD CHEMICAL HYGIENE PRACTICES WHEN USING THIS AND OTHER CLEANING
PRODUCTS.
CHRONIC HEALTH HAZARDS:
REPEATED OR PROLONGED OCCUPATIONAL OVEREXPOSURES MAY CAUSE DERMATITIS.
CARCINOGENICITY:
CHEMICAL: NONE
OSHA: NO
NTP: NO
IARC: NO
SIGNS AND SYMPTOMS OF EXPOSURE:
REDNESS, TEARING, BURNING IN EYES. REDNESS, DRYING, CRACKING OF SKIN.
IRRITATION OF NOSE AND THROAT.
MEDICAL CONDITIONS GENERALLY AGGRAVATED BY EXPOSURE:
PRE-EXISTING SKIN DISORDERS.
| SECTION 4: EMERGENCY AND FIRST AID PROCEDURES | |
EYES:
IMMEDIATELY FLUSH WITH PLENTY OF WATER FOR AT LEAST 15 MINUTES LIFTING
EYELIDS TO INSURE COMPLETE REMOVAL. SEE A PHYSICIAN IMMEDIATELY.
INGESTION:
RINSE OUT MOUTH WITH WATER. DO NOT INDUCE VOMITING UNLESS DIRECTED BY A
PHYSICIAN. NEVER GIVE ANYTHING BY MOUTH TO AN UNCONSCIOUS PERSON. CALL A
PHYSICIAN OR POISON CONTROL CENTER IMMEDIATELY.
INHALATION:
GET TO FRESH AIR. IF BREATHING HAS STOPPED, QUALIFIED PERSONNEL SHOULD
ADMINISTER ARTIFICIAL RESPIRATION.
SKIN:
IMMEDIATELY FLUSH WITH PLENTY OF WATER FOR AT LEAST 15 MINUTES WHILE
REMOVING CONTAMINATED CLOTHING. IF IRRITATION ARISES AND PERSISTS, CALL A
PHYSICIAN. LAUNDER CONTAMINATED CLOTHING AND SHOES BEFORE REUSE.
| SECTION 5: FIRE FIGHTING MEASURES | |
USA FLAME PROJECTION TEST (ASTM D-3065): 0" - NON-FLAMMABLE
FLAMMABLE LIMITS: NO DATA
LEL: NO DATA
UEL: NO DATA
EXTINGUISHING MEDIA:
THIS PRODUCT DOES NOT SUPPORT COMBUSTION. USE EXTINGUISHING AGENT SUITABLE
TO FUEL SOURCE.
SPECIAL FIRE FIGHTING PROCEDURES:
KEEP CONTAINERS COOL AND VAPORS DOWN WITH WATER SPRAY. PREVENT RUNOFF FROM
ENTERING SEWERS AND PUBLIC WATERWAYS. WEAR SELF-CONTAINED BREATHING
APPARATUS (SCBA) IN CHEMICAL FIRES.
HAZARDOUS PRODUCTS OF COMBUSTION:
CARBON DIOXIDE, CARBON MONOXIDE, SMOKE, SOOT, AMMONIACAL AND NITROUS OXIDE
FUMES, SMOKE, SOOT AND VARIOUS ORGANIC OXIDATION BY PRODUCTS.
UNUSUAL FIRE AND EXPLOSION HAZARDS:
AEROSOL CONTAINER (PRESSURIZED) MAY BURST IF HEATED OVER 120 DEG. F.
| SECTION 6: ACCIDENTAL RELEASE MEASURES | |
SMALL SPILL:
WIPE UP SMALL RELEASES WITH A DRY ABSORBENT CLOTH OR OTHER ABSORBENT
MATERIAL.
LARGE SPILL:
ABSORB LIQUID WITH VERMICULITE, ABSORBENT CLOTH, OR OTHER ABSORBENT
MATERIAL. PREVENT MATERIAL FROM ENTERING SEWERS OR DRAINS. VENTILATE AREA
AND BLOCK TRAFFIC. TRANSFER CONTAMINATED MATERIAL INTO SUITABLE CONTAINER
FOR PROPER DISPOSAL.
| SECTION 7: HANDLING AND STORAGE | |
HANDLING:
AVOID CONTACT WITH EYES, SKIN AND CLOTHING. WASH THOROUGHLY AFTER HANDLING.
AVOID INHALING MIST AND VAPORS. DO NOT DELIBERATELY CONCENTRATE AND INHALE
VAPORS. USE WITH ADEQUATE VENTILATION. DO NOT USE AROUND IGNITION SOURCES
SUCH AS HEAT, SPARKS, OPEN FLAME, ETC. DIRECT SPRAY AWAY FROM FACE.
STORAGE:
FOLLOW LABEL DIRECTIONS CAREFULLY. KEEP OUT OF REACH OF CHILDREN. STORE IN
A COOL (UNDER 120 DEG. F) DRY LOCATION AWAY FROM HEAT, SPARKS, OPEN FLAME,
AND DIRECT SUNLIGHT. REPLACE CAP WHEN NOT IN USE.
| SECTION 8: EXPOSURE CONTROLS / PERSONAL PROTECTION | |
EYE PROTECTION:
YES, IF DIRECT CONTACT IS POSSIBLE USE APPROVED SAFETY GLASSES OR GOGGLES.
(ANSI Z87)
SKIN PROTECTION: NOT USUALLY NEEDED.
RESPIRATORY PROTECTIONS:
NOT USUALLY NECESSARY. USE WITH ADEQUATE VENTILATION. USE NIOSH/MSHA
APPROVED RESPIRATOR IF PELS OR TLVS ARE EXCEEDED.
ENGINEERING CONTROLS:
VENTILATION NOT USUALLY NECESSARY BUT SHOULD BE PROVIDED IN THE EVENT OF
OVEREXPOSURE.
| SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES | |
APPEARANCE AND ODOR:
WHITE OPAQUE LIQUID WITH A LEMON SCENT IN AN AEROSOL CAN.
pH: 10 +/- 0.5
SPECIFIC GRAVITY (70 DEG. F): 0.999
BOILING POINT: 212 DEG. F
MELTING POINT: NO DATA
EVAPORATION RATE (BUTYL ACETATE = 1): NO DATA
PRESSURE (PSIG. @ 70 DEG. F): 65 +/- 10
VAPOR DENSITY (AIR = 1): >1
SOLUBILITY IN WATER: COMPLETE
VOLATILE ORGANIC COMPOUNDS (VOCS): 92 GRAMS PER LITER OR 10% BY WEIGHT VOCS
| SECTION 10: STABILITY AND REACTIVITY | |
HAZARDOUS POLYMERIZATION:
THIS PRODUCT WILL NOT UNDERGO HAZARDOUS POLYMERIZATION.
HAZARDOUS DECOMPOSITION OR BYPRODUCTS:
CARBON DIOXIDE, CARBON MONOXIDE, SMOKE, SOOT, AMMONIACAL AND NITROUS OXIDE
FUMES, SMOKE, SOOT AND VARIOUS ORGANIC OXIDATION BY PRODUCTS.
CHEMICAL STABILITY: STABLE
INCOMPATIBILITY (MATERIALS TO AVOID):
STRONG OXIDIZERS, ACIDS, BASES, AND REDUCING AGENTS.
| SECTION 11: TOXICOLOGICAL INFORMATION | |
NO DATA
| SECTION 12: ECOLOGICAL INFORMATION | |
NO DATA
| SECTION 13: DISPOSAL CONSIDERATION | |
DISPOSAL METHOD:
DISPOSE OF IN ACCORDANCE WITH ALL APPLICABLE LOCAL, STATE, AND FEDERAL
REGULATIONS.
RCRA WASTE INFORMATION:
IF THIS PRODUCT BECOMES A WASTE, IT WOULD NOT BE A HAZARDOUS WASTE AS
DEFINED BY RCRA (40 CFR 261). HOWEVER THE WASTE SHOULD BE PROPERLY
CHARACTERIZED TO EVALUATE WHETHER ITS COMPOSITION HAS BEEN MODIFIED
PRIOR TO DISPOSAL.
| SECTION 14: TRANSPORT INFORMATION | |
DOT INFORMATION - 49 CFR 172.101:
PROPER SHIPPING DESCRIPTION: CONSUMER COMMODITY
HAZARD CLASS: ORM-D
IDENTIFICATION NUMBER: NONE
PACKING GROUP: NONE
WATER TRANSPORTATION:
PROPER SHIPPING DESCRIPTION: AEROSOLS
HAZARD CLASS: 2
IDENTIFICATION NUMBER: UN 1950
PACKING GROUP: NONE
AIR TRANSPORTATION:
PROPER SHIPPING DESCRIPTION: AEROSOLS, NON-FLAMMABLE
HAZARD CLASS: 2.2
IDENTIFICATION NUMBER: UN 1950
PACKING GROUP: NONE
MARINE POLLUTANTS: NONE
| SECTION 15: REGULATORY INFORMATION | |
US FEDERAL REGULATIONS:
TSCA (TOXIC SUBSTANCES CONTROL ACT) STATUS:
ALL INGREDIENTS ARE ON THE TSCA INVENTORY OR ARE NOT REQUIRED TO BE LISTED
ON THE TSCA INVENTORY.
CERCLA RQ - 40 CFR 302.4 (A): NONE LISTED
SARA 313 COMPONENTS - 40 CFR 372.65: NONE
STATE AND LOCAL REGULATIONS:
CALIFORNIA PROPOSITION 65:
WARNING:
THIS PRODUCT CONTAINS TRACE CHEMICALS (ETHYLENE OXIDE AND PROPYLENE OXIDE)
KNOWN TO THE STATE OF CALIFORNIA TO CAUSE CANCER, AND/OR BIRTH DEFECTS OR
OTHER REPRODUCTIVE HARM.
| SECTION 16: ADDITIONAL INFORMATION | |
DATE PREPARED: 08/30/07
WARNING!
THE USE OF THIS PRODUCT IS BEYOND THE CONTROL OF THE MANUFACTURER;
THEREFORE, NO GUARANTEE, EXPRESSED OR IMPLIED, IS MADE AS TO THE EFFECTS
OF SUCH OR THE RESULTS TO BE OBTAINED IF NOT USED IN ACCORDANCE WITH
DIRECTIONS OR ESTABLISHED SAFE PRACTICE. THE USER MUST ASSUME ALL
RESPONSIBILITY, INCLUDING INJURY OR DAMAGE, RESULTING FROM ITS MISUSE AS
SUCH, OR IN COMBINATION WITH OTHER MATERIALS. THE MANUFACTURER WARRANTS
ONLY THAT THIS PRODUCT MEETS THE MANUFACTURER'S SPECIFICATIONS FOR SUCH
PRODUCT. THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR
IMPLIED, AS TO DESCRIPTION, QUALITY, MERCHANTABILITY. FITNESS FOR ANY
PARTICULAR PURPOSE, PRODUCTIVENESS, OR ANY OTHER MATTER, OF THIS PRODUCT.
THE MANUFACTURER SHALL BE IN NO WAY RESPONSIBLE FOR THE IMPROPER USE OF
THIS PRODUCT. THE SOLE AND EXCLUSIVE REMEDY AGAINST THE MANUFACTURER FOR
BREACH OF WARRANTY SHALL BE REIMBURSEMENT OF THE PURCHASE PRICE OF THE
PRODUCT IN THE EVENT THAT A DEFECTIVE CONDITION OF THE PRODUCT SHALL BE
FOUND TO EXIST. NO OTHER REMEDY (INCLUDING BUT NOT LIMITED TO INCIDENTAL
OR CONSEQUENTIAL DAMAGES FOR INJURY TO PERSON OR PROPERTY OR ANY OTHER
INCIDENTAL OR CONSEQUENTIAL LOSS) SHALL BE AVAILABLE.