| Common Name: | RUN CAPACITOR (CBB65A) |
| Manufacturer: | WENLING ZEGUO DALI ELECTRONIC UNIT FACTORY CHINA |
| SDS Revision Date: | 10/10/2007 |
| SDS Format: | No Format Specified |
| Item Number(s): | 2MDV1, 2MDV2, 2MDV3, 2MDV4, 2MDV5, 2MDV6, 2MDV7, 2MDV8, 2MDV9, 2MDW1, 2MDW2, 2MDW3, 2MDW4, 2MDW5, 2MDW6, 2MDW7, 2MDW8, 2MDW9, 2MDX1, 2MDX2, 2MDX3, 2MDX4, 2MDX5, 2MDX6, 2MDX7, 2MDX8, 2MDX9, 2MDY1, 2MDY2, 2MDY3, 2MDY4, 2MDY5, 2MDY6, 2MDY7, 2MDY8, 2MDY9, 2MDZ1, 2MDZ2, 2MDZ3, 2MDZ4, 2MDZ5, 2MDZ6, 2MDZ7, 2MDZ8, 2MDZ9, 2MEA1, 2MEA2, 2MEA3, 2MEA4, 2MEA5, 2MEA6, 2MEA7, 2MEA8, 2MEA9, 2MEC1, 2MEC2, 2MEC3, 2MEC4, 2MEC5, 2MEC6, 2MEC7, 2MEC8, 2MEC9, 2MEE1, 2MEE2, 2MEE3, 2MEE4, 2MEE5, 2MEE6, 2MEE7, 2MEE8, 2MEE9, 2MEF1, 2MEF2, 2MEF3, 2MEF4, 2MEF5, 2MEF6, 2MEF7, 2MEF8, 2MEF9, 2MEG1, 2MEG2, 2MEG3, 2MEG4, 2MEG5, 2MEG6, 2MEG7, 2MEG8, 2MEG9, 2MEH1, 2MEH2, 2MEH3, 2MEH4, 2MEH5, 2MEH6, 2MEH7, 2MEH8, 2MEH9, 2MEJ1, 2MEJ2, 2MEJ3, 2MEJ4, 2MEJ6, 2MEJ7, 2MEJ8, 2MEJ9, 2MEK1, 2MEK2, 2MEK3, 2MEK4, 2MEK5, 2MEK6, 2MEK7, 2MEK8, 2MEK9, 2MEL1, 2MEU7, 2MEU8 |
| Manufacturer Model Number(s): |
SDS Table of Contents
Click the desired link below to jump directly to that section in the SDS.
PONY
REPORT NO.: SZ070929-039
DATE: 10.10.2007
MATERIAL SAFETY DATA SHEET
| SECTION 1 - CHEMICAL PRODUCT AND COMPANY IDENTIFICATION |  |
PRODUCT NAME: RUN CAPACITOR (CBB65A)
TRADE NAME: CAPACITOR
SAMPLE CODE: CBB65A
MANUFACTURE: WENLING ZEGUO DALI ELECTRONIC UNIT FACTORY
ADDRESS:
DANYA INDUSTRIAL ZONE
ZEGUO, WENLING CITY, ZHEJIANG
CHINA
POST CODE: 317523
TEL: 0576-86448268
EMERGENCY TELEPHONE: 0576-86448268
EMAIL: DALI@HUI-ZHONG.NET
| SECTION 2 - COMPOSITION/INFORMATION ON INGREDIENT | |
COMPONENT CHEMICAL NAME FORMULA CAS NO.
ALUMINUM HULL ALUMINUM Al 7429-90-5
CUPULE OF INSERT POLYPROPYLENE (C3H6)x 9003-07-0
INSERT COPPER WITH TIN Cu 7440-50-8
Sn 7440-31-5
FILLER MICROCRYSTALLINE WAX 63231-60-7
CORE:
POLYPROPYLENE POLYPROPYLENE (C3H6)x 9003-07-0
ZINC ZINC Zn 7440-66-6
ALUMINUM ALUMINUM Al 7429-90-5
MANDRIL POLYPROPYLENE (C3H6)x 9003-07-0
| SECTION 3 - HAZARDS IDENTIFICATION | |
NO HARM IN NORMAL USE.
CAUTION!
PUT RUN CAPACITY INTO FIRE AND MOLTEN MATERIAL WILL PRODUCE THERMAL BURNS.
MAY CAUSE MECHANICAL IRRITATION. INHALATION OF DUST MAY CAUSE MECHANICAL
IRRITATION.
| SECTION 4 - FIRST AID MEASURES | |
EYES:
IF MOLTEN MATERIAL CONTACTS THE EYE, IMMEDIATELY FLUSH WITH PLENTY OF WATER
FOR AT LEAST 15 MINUTES. IF EASY TO DO, REMOVE CONTACT LENSES. GET MEDICAL
AID.
SKIN:
IF BURNED BY CONTACT WITH MOLTEN MATERIAL, COOL AS QUICKLY AS POSSIBLE.
DO NOT PEEL MATERIAL FROM SKIN. GET MEDICAL AID.
INHALATION:
IF SYMPTOMATIC, MOVE TO FRESH AIR. GET MEDICAL ATTENTION IF SYMPTOMS
PERSIST.
INGESTION: SEEK MEDICAL ADVICE.
NOTE TO PHYSICIAN:
BURNS SHOULD BE TREATED AS THERMAL BURNS. THE MATERIAL WILL COME OFF AS
HEALING OCCURS, THEREFORE, IMMEDIATE REMOVAL FROM THE SKIN IS NOT
NECESSARY.
| SECTION 5 - FIRE FIGHTING MEASURES | |
FLASH POINT: N/A.
AUTO-IGNITION TEMPERATURE: N/A.
EXTINGUISHING MEDIA: USE WATER SPRAY, CARBON DIOXIDE OR DRY CHEMICAL.
FIREFIGHTING:
WEAR SELF CONTAINED BREATHING APPARATUS AND PROTECTIVE CLOTHING.
| SECTION 6 - ACCIDENTAL RELEASE MEASURES | |
STEPS TO BE TAKEN IN CASE MATERIAL IS RELEASED OR SPILLED:
WEAR GLOVES TO PICK UP BROKEN, DAMAGED CAPACITOR, TRANSFER TO WASTEBASKET
FOR DISPOSAL.
WASTE DISPOSAL METHOD:
DISPOSE OF IN ACCORDANCE WITH ALL FEDERAL, STATE AND LOCAL RULES AND
REGULATIONS.
PRECAUTIONS-HANDLING/STORING: AVOID PHYSICAL DAMAGE. HANDLE WITH CARE.
| SECTION 7 - HANDLING AND STORAGE | |
THE CAPACITOR SHOULD NOT BE OPENED, DESTROYED OR INCINERATE.
HANDLING:
AVOID CONTACT WITH MOLTEN MATERIAL. KEEP AWAY FROM FIRE. AVOID MECHANICAL
OR ELECTRICAL ABUSE.
STORAGE:
STORAGE PREFERABLY IN COOL, DRY AND VENTILATED AREA, WHICH IS SUBJECT TO
LITTLE TEMPERATURE CHANGE. STORAGE AT HIGH TEMPERATURES SHOULD BE AVOIDED.
DO NOT PLACE THE CAPACITOR NEAR HEATING EQUIPMENT, NOR EXPOSE TO DIRECT
SUNLIGHT FOR LONG PERIODS.
| SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION | |
NO NEED IN NORMAL USE.
IF AT LONG INDUSTRIAL CONDITION OR ON FIRE, REFERENCE AS FOLLOWS
ENGINEERING CONTROLS:
IN A COOL, WELL-VENTILATED AREA. USE AN APPROVED PARTICULATE RESPIRATOR IN
DUSTY OR MISTY ATMOSPHERES.
PERSONAL PROTECTION: SAFETY GLASSES, GLOVE, AND LAB COAT.
| SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES | |
pH: N/A.
VAPOR PRESSURE: N/A.
VAPOR DENSITY: N/A.
EVAPORATION RATE: N/A.
SOLUBILITY: N/A.
APPEARANCE CHARACTERS: SILVERY WHITE CYLINDRICAL SOLID.
CHEMICAL USES: REFRIGERATION EQUIPMENT OF AIR CONDITION.
| SECTION 10 - STABILITY AND REACTIVITY | |
STABILITY: STABLE
CONDITIONS TO AVOID: HEATING, MECHANICAL ABUSE AND ELECTRICAL ABUSE.
INCOMPATIBILITIES: REACT WITH FIRE.
HAZARDOUS POLYMERIZATION: WILL NOT OCCUR.
| SECTION 11 - TOXICOLOGICAL INFORMATION | |
NO INFORMATION AVAILABLE.
| SECTION 12 - ECOLOGICAL INFORMATION | |
NO INFORMATION AVAILABLE.
| SECTION 13 - DISPOSAL CONSIDERATIONS | |
WASTE DISPOSAL:
TREATMENT, OR DISPOSAL MAY BE SUBJECT TO NATIONAL, STATE, OR LOCAL LAWS.
| SECTION 14 - TRANSPORT INFORMATION | |
SHIPPING NAME: NOT REGULATED.
HAZARD CLASS: N/A.
PACKAGING INFORMATION: BOX, TRAY.
| SECTION 15 - REGULATORY INFORMATION | |
LAW INFORMATION: IN ACCORDANCE WITH ALL FEDERAL, STATE AND LOCAL LAWS.
| SECTION 16 - ADDITIONAL INFORMATION | |
THE ABOVE INFORMATION IS BASED ON THE DATA OF WHICH WE ARE AWARE AND IS
BELIEVED TO BE CORRECT AS OF THE DATA HEREOF. SINCE THIS INFORMATION MAY
BE APPLIED UNDER CONDITIONS BEYOND OUR CONTROL AND WITH WHICH MAY BE
UNFAMILIAR AND SINCE DATA MADE AVAILABLE SUBSEQUENT TO THE DATA HEREOF
MAY SUGGEST MODIFICATIONS OF THE INFORMATION, WE DO NOT ASSUME ANY
RESPONSIBILITY FOR THE RESULTS OF ITS USE. THIS INFORMATION IS FURNISHED
UPON CONDITION THAT THE PERSON RECEIVING IT SHALL MAKE HIS OWN
DETERMINATION OF THE SUITABILITY OF THE MATERIAL FOR HIS PARTICULAR
PURPOSE.
MSDS CREATION DATE: OCTOBER 10, 2007