| Common Name: | JET FUEL NO.3 |
| Manufacturer: | HANGZHOU HANGWEN INSTRUMENTS CHINA |
| SDS Revision Date: | (No Date) |
| SDS Format: | No Format Specified |
| Item Number(s): | 4LZN6, 4LZN7, 4LZN8, 4LZN9, 4LZP1, 4LZP2, 4LZP3, 4LZP4, 4LZP5, 4LZP6, 4LZP7, 4LZP8, 4PRT3, 4PRT4, 4PRT5, 4PRT6, 4PRT7, 4PRT8, 4PRT9, 4PRU1, 4PRU2, 4PRU3, 4PRU4, 4PRU5, 4PRU6, 4PRU7, 4PRU8, 4PRU9 |
| Manufacturer Model Number(s): |
SDS Table of Contents
Click the desired link below to jump directly to that section in the SDS.
MATERIAL SAFETY DATA SHEET
HANGZHOU HANGWEN INSTRUMENTS CO., LTD
PRODUCT NAME: JET FUEL NO. 3
| SECTION 1 CHEMICAL PRODUCT AND COMPANY IDENTIFICATION |  |
PRODUCT NAME: JET FUEL NO. 3
CHEMICAL FAMILY: KEROSENE
PRODUCT DESCRIPTION: CLEAR BLUE LIQUID
CONTACT INFORMATION:
COMPANY: HANGZHOU HANGWEN INSTRUMENTS CO., LTD
ADDRESS:
LIUXIA INDUSTRIAL PARK
XIHU DISTRICT
HANGZHOU, ZHEJIANG 310023
CHINA
| SECTION 2 COMPOSITION / INFORMATION ON INGREDIENTS | |
SUBSTANCE NAME: JET FUEL NO. 3
| SECTION 3 HAZARDS IDENTIFICATION | |
EMERGENCY OVERVIEW:
CLEAR, BLUE LIQUID, POTENTIALLY HAZARDOUS VAPORS. FLAMMABLE AS DEFINED BY
DOT AND TDG. MAY BE CLASSIFIED BY DOT AS COMBUSTIBLE. CLASSIFIED AS
COMBUSTIBLE BY OSHA. CAN CAUSE EYE AND SKIN IRRITATION UPON CONTACT.
INHALATION OF VAPORS CAN CAUSE ANESTHETIC EFFECT LEADING TO DEATH IN
POORLY VENTILATED AREAS.
POTENTIAL HEALTH EFFECTS:
INHALATION:
HIGH CONCENTRATIONS ARE IRRITATING TO THE RESPIRATORY TRACT; MAY CAUSE
HEADACHE, DIZZINESS, NAUSEA, VOMITING AND MALAISE.
SKIN:
BRIEF CONTACT MAY CAUSE SLIGHT IRRITATION; PROLONGED CONTACT MAY CAUSE
MODERATE IRRITATION OR DERMATITIS.
EYES:
HIGH VAPOR CONCENTRATION OR CONTACT MAY CAUSE IRRITATION AND DISCOMFORT.
INGESTION:
MAY RESULT IN VOMITING; ASPIRATION OF VOMITUS INTO THE LUNGS MUST BE
AVOIDED; DO NOT INDUCE VOMITING. MINUTE AMOUNTS ASPIRATED INTO THE LUNGS
CAN PRODUCE SEVERE LUNG INJURY, CHEMICAL PNEUMONITIS, PULMONARY EDEMA OR
DEATH.
CARCINOGENICITY:
THIS PRODUCT CONTAINS A MIXTURE OF PETROLEUM HYDROCARBONS CALLED MIDDLE
DISTILLATES. BECAUSE OF THIS BROAD DESCRIPTION, MANY PRODUCTS ARE
CONSIDERED MIDDLE DISTILLATES YET THEY ARE PRODUCED BY A VARIETY OF
DIFFERENT PETROLEUM REFINING PROCESSES. TOXICOLOGY DATA DEVELOPED ON SOME
MIDDLE DISTILLATES FOUND THAT THEY CAUSED POSITIVE RESPONSES IN SOME
MUTAGENICITY TESTS AND CAUSED SKIN CANCER WHEN REPEATEDLY APPLIED TO MICE
OVER THEIR LIFETIME.
| SECTION 4 FIRST AID MEASURES | |
EYE CONTACT:
CHECK FOR AND REMOVE ANY CONTACT LENSES. IN CASE OF CONTACT, IMMEDIATELY
FLUSH EYES WITH PLENTY OF WATER FOR AT LEAST 15 MINUTES. GET MEDICAL
ATTENTION.
SKIN CONTACT:
IN CASE OF CONTACT, IMMEDIATELY FLUSH SKIN WITH PLENTY OF WATER. COVER THE
IRRITATED SKIN WITH AN EMOLLIENT. REMOVE CONTAMINATED CLOTHING AND SHOES.
WASH CLOTHING BEFORE REUSE. THOROUGHLY CLEAN SHOES BEFORE REUSE. GET
MEDICAL ATTENTION.
INHALATION:
IF INHALED, REMOVE TO FRESH AIR. IF NOT BREATHING, GIVE ARTIFICIAL
RESPIRATION. IF BREATHING IS DIFFICULT, GIVE OXYGEN. GET MEDICAL ATTENTION
IMMEDIATELY.
INGESTION:
IF SWALLOWED, DO NOT INDUCE VOMITING. IF SWALLOWED, DO NOT INDUCE VOMITING
UNLESS DIRECTED TO DO SO BY MEDICAL PERSONNEL. NEVER GIVE ANYTHING BY
MOUTH TO AN UNCONSCIOUS PERSON. LOOSEN TIGHT CLOTHING SUCH AS A COLLAR,
TIE, BELT OR WAISTBAND. GET MEDICAL ATTENTION IMMEDIATELY.
| SECTION 5 FIRE FIGHTING MEASURES | |
FLAMMABLE LIMITS:
LEL: 0.6%
UEL: 8.6%
AUTOIGNITION TEMPERATURE: 410 DEG. F (210 DEG. C)
FLASH POINT:
C (F): 66 (151)
GENERAL HAZARDS:
PRODUCT IS CONSIDERED COMBUSTIBLE. PRODUCTS OF COMBUSTION INCLUDE
COMPOUNDS OF CARBON, HYDROGEN AND OXYGEN, INCLUDING CARBON MONOXIDE,
CARBON DIOXIDE, WATER FOG, DRY CHEMICAL, CHEMICAL FOAM.
EXTINGUISHING MEDIA:
CARBON DIOXIDE, WATER FOG, DRY CHEMICAL, CHEMICAL FOAM
FIRE FIGHTING PROCEDURES:
FIREFIGHTERS MUST WEAR FULL FACEPIECE SELF - CONTAINED BREATHING APPARATUS
IN POSITIVE PRESSURE MODE. DO NOT USE SOLID STREAM OF WATER SINCE STREAM
WILL SCATTER AND SPREAD FIRE. FINE WATER SPRAY CAN BE USED TO KEEP
FIRE - EXPOSED CONTAINERS COOL.
UNUSUAL FIRE AND EXPLOSION HAZARDS:
CLOSED CONTAINERS CAN EXPLODE DUE TO BUILDUP OF PRESSURE WHEN EXPOSED TO
EXTREME HEAT. DO NOT USE DIRECT STREAM OF WATER ON POOL FIRES AS PRODUCT
MAY REIGNITE ON WATER SURFACE.
CAUTION - MATERIAL IS COMBUSTIBLE!
HAZARDOUS COMBUSTION PRODUCTS: SMOKE, FUMES, OXIDES OF CARBON
| SECTION 6 ENVIRONMENTAL RELEASE MEASURES | |
STEPS TO BE TAKEN IN CASE MATERIAL IS RELEASED OR SPILLED: COMBUSTIBLE.
EVACUATE AND VENTILATE AREA; CONFINE AND ABSORB INTO ABSORBENT; PLACE
MATERIAL INTO APPROVED CONTAINERS FOR DISPOSAL; DO NOT DISCHARGE INTO
LAKES, PONDS, STREAMS OR PUBLIC WATERS.
| SECTION 7 HANDLING AND STORAGE | |
PRECAUTIONS TO BE TAKEN IN HANDLING AND STORAGE:
THIS MATERIAL IS COMBUSTIBLE. IT SHOULD BE STORED IN TIGHTLY CLOSED
CONTAINERS IN A COOL, WELL VENTILATED AREA. VAPOR MAY FORM EXPLOSIVE
MIXTURES IN AIR. ALL SOURCES OF IGNITION SHOULD BE CONTROLLED. THIS
MATERIAL MAY BE CLASSIFIED AS COMBUSTIBLE BY DOT UNLESS TRANSPORTED BY
VESSEL OR AIRCRAFT. KEEP THIS AND OTHER CHEMICALS OUT OF REACH OF
CHILDREN. AVOID INHALING CONCENTRATED FUMES OR VAPORS.
| SECTION 8 EXPOSURE CONTROLS/PERSONAL PROTECTION | |
VENTILATION:
THE USE OF LOCAL EXHAUST VENTILATION IS RECOMMENDED TO CONTROL EMISSIONS
NEAR THE SOURCE. PROVIDE MECHANICAL VENTILATION OF CONFINED SPACES. USE
EXPLOSION-PROOF VENTILATION EQUIPMENT.
WORK / HYGIENIC PRACTICES:
PRACTICE SAFE WORKPLACE HABITS. MINIMIZE BODY CONTACT WITH THIS, AS WELL
AS ALL CHEMICALS IN GENERAL.
EYE PROTECTION: PROTECTIVE EYE GLASSES OR CHEMICAL SAFETY GOGGLES.
SKIN PROTECTION:
IMPERVIOUS GLOVES SHOULD BE WORN. GOOD PERSONAL HYGIENE PRACTICES SHOULD
ALWAYS BE FOLLOWED
OTHER PROTECTIVE CLOTHING OR EQUIPMENT: SAFETY EYEBATH NEARBY
| SECTION 9 PHYSICAL AND CHEMICAL PROPERTIES | |
APPEARANCE: LIQUID
COLOR: CLEAR, BLUE
ODOR: MILD HYDROCARBON
ODOR THRESHOLD-PPM: NOT ESTABLISHED
pH: NOT APPLICABLE
BOILING POINT C (F): >172 (342)
MELTING POINT C (F): NOT APPLICABLE
FLASH POINT:
C (F): 66 (151)
FLAMMABILITY (SOLIDS): NOT ESTABLISHED
AUTO FLAMMABILITY C (F): 210 (410)
EXPLOSIVE PROPERTIES: NOT APPLICABLE
OXIDIZING PROPERTIES: NOT APPLICABLE
VAPOR PRESSURE-MMHg 38 C: 5.0
VAPOR DENSITY (AIR=1): 4.5
EVAPORATION RATE (1 = n-BUTYL ACETATE): <0.1
RELATIVE DENSITY:
15.6 C: 0.7989
SOLUBILITY IN WATER: NEGLIGIBLE
PARTITION COEFFICIENT: NOT ESTABLISHED
KINEMATIC VISCOSITY AT 40C (M M2/S): <8.0
KINEMATIC VISCOSITY AT 100C: NOT ESTABLISHED
POUR POINT C (F): -60 (-76)
FREEZING POINT C (F): NOT ESTABLISHED
VOLATILE ORGANIC COMPOUND: NOT ESTABLISHED
DMSO EXTRACT:
IP-346 (WT.%): NOT APPLICABLE
| SECTION 10 STABILITY AND REACTIVITY | |
STABILITY: STABLE. HAZARDOUS POLYMERIZATION WILL NOT OCCUR.
CONDITIONS TO AVOID AND INCOMPATIBLE MATERIALS:
AVOID HIGH TEMPERATURES, OPEN FLAMES, SPARKS, WELDING, SMOKING AND OTHER
IGNITION SOURCES. KEEP AWAY FROM STRONG OXIDIZERS SUCH AS NITRIC AND
SULFURIC ACIDS.
HAZARDOUS DECOMPOSITION PRODUCTS:
CARBON MONOXIDE, CARBON DIOXIDE AND NON-COMBUSTED HYDROCARBONS (SMOKE).
| SECTION 11 TOXICOLOGICAL DATA | |
ACUTE TOXICOLOGY:
ORAL TOXICITY (RATS): NOT ESTABLISHED
DERMAL TOXICITY (RABBITS): NOT ESTABLISHED
INHALATION TOXICITY (RATS): NOT ESTABLISHED
EYE IRRITATION (RABBITS): NOT ESTABLISHED
SKIN IRRITATION (RABBITS): NOT ESTABLISHED
CHRONIC TOXICOLOGY (SUMMARY):
PROLONGED REPEATED SKIN CONTACT MAY CAUSE IRRITATION AND/OR DERMATITIS.
| SECTION 12 ECOLOGICAL INFORMATION | |
ENVIRONMENTAL FATE AND EFFECTS: NOT ESTABLISHED
| SECTION 13 DISPOSAL CONSIDERATIONS | |
WASTE DISPOSAL METHOD:
PRODUCT IS SUITABLE FOR BURNING FOR FUEL VALUE IN COMPLIANCE WITH
APPLICABLE LAWS AND REGULATIONS AND CONSIDERATION OF PRODUCT
CHARACTERISTICS AT THE TIME OF DISPOSAL. DO NOT FLUSH TO SANITARY SEWER
OR WATERWAY.
| SECTION 14 TRANSPORTATION INFORMATION | |
PROPER SHIPPING NAME: FUEL, AVIATION, TURBINE ENGINE
HAZARD CLASS & DIV: COMBUSTIBLE LIQUID
DOT HAZARD CLASS / PACK GROUP: 3 / III
IATA HAZARD CLASS / PACK GROUP: 3 / III
IMDG HAZARD CLASS: 3 / III
RID/ADR DANGEROUS GOODS CODE: 3
HAZARD SYMBOLS: F
NOTE:
TRANSPORTATION INFORMATION PROVIDED IS FOR REFERENCE ONLY. CLIENT IS URGED
TO CONSULT CFR 49 PARTS 100 - 177, IMDG, IATA, EC, UNITED NATIONS TDG, AND
WHMIS (CANADA) TDG INFORMATION MANUALS FOR DETAILED REGULATIONS AND
EXCEPTIONS COVERING SPECIFIC CONTAINER SIZES, PACKAGING MATERIALS AND
METHODS OF SHIPPING.
| SECTION 15 OTHER INFORMATION | |
INJECTION INJURY WARNING:
IF PRODUCT IS INJECTED INTO OR UNDER THE SKIN, OR INTO ANY PART OF THE
BODY, REGARDLESS OF THE APPEARANCE OF THE WOUND OR ITS SIZE, THE
INDIVIDUAL SHOULD BE EVALUATED IMMEDIATELY BY A PHYSICIAN AS A SURGICAL
EMERGENCY. EVEN THOUGH INITIAL SYMPTOMS FROM HIGH-PRESSURE INJECTION MAY
BE MINIMAL OR ABSENT, EARLY SURGICAL TREATMENT WITHIN THE FIRST FEW HOURS
MAY SIGNIFICANTLY REDUCE THE ULTIMATE EXTENT OF INJURY.