| Common Name: | PURINEL |
| Manufacturer: | TECHNICAL CONCEPTS |
| SDS Revision Date: | 3/1/2005 |
| SDS Format: | No Format Specified |
| Item Number(s): | 8UMV4, 9JYJ7 |
| Manufacturer Model Number(s): |
SDS Table of Contents
Click the desired link below to jump directly to that section in the SDS.
TC
TECHNICAL CONCEPTS LLC
HYGIENE SOLUTIONS THROUGH TECHNOLOGY
MSDS #: PUR-060-05
EFFECTIVE DATE: 01 MAR 05
MATERIAL SAFETY DATA SHEETS
| SECTION 1 - PRODUCT AND COMPANY IDENTIFICATION |  |
PRODUCT NAME: PURINEL
MANUFACTURED BY:
TECHNICAL CONCEPTS
1301 ALLANSON ROAD
MUNDELEIN, IL. 60060
847-837-4100
24-HOUR EMERGENCY CONTACT: 1-800-535-5053 (INFOTRAC)
| SECTION 2 - COMPOSITION/INFORMATION ON INGREDIENTS | |
HAZARDOUS COMPONENTS GREATER THAN 1.0% (0.1% IF CARCINOGEN OR SUSPECTED
CARCINOGEN):
COMPONENTS CAS# % BY WT
EDTA 64-02-8 3-4
SODIUM LAURIMINO DIPROPIONATE 14960-06-0 4-6
COMPONENTS OSHA-PEL ACGIH LD50 LD50
EDTA NOT AVAILABLE 10 MG/M3 TWA NOT 3030 MG/KG
AVAILABLE ORAL, RAT
SODIUM LAURIMINO- NOT AVAILABLE NOT AVAILABLE NOT 31300 MG/KG
DIPROPIONATE AVAILABLE ORAL, RAT
| SECTION 3 - HAZARDOUS IDENTIFICATION | |
KEEP OUT OF THE REACH OF CHILDREN.
POTENTIAL HEALTH EFFECTS:
ROUTE OF ENTRY:
EYE (Y)
SKIN (Y)
INHALATION (Y)
INGESTION (Y)
HEALTH HAZARDS: MAY CAUSE EYE AND SKIN IRRITATION, HARMFUL IF SWALLOWED
SIGNS SYSTEMS OF OVER EXPOSURE: EYE AND SKIN IRRITANT.
MEDICAL CONDITIONS:
UNDER NORMAL CONDITIONS THIS PRODUCT SHOULD NOT BE AGGRAVATING.
| SECTION 4 - FIRST AID MEASURES | |
EYE:
IMMEDIATELY FLUSH WITH WATER. REMOVE CONTACT LENSES, IF APPLICABLE, AND
CONTINUE FLUSHING. OBTAIN MEDICAL ATTENTION IF THE IRRITATION PERSISTS.
SKIN:
FLUSH WITH COOL WATER, WASH WITH SOAP AND WATER. OBTAIN MEDICAL ATTENTION
IF IRRITATION PERSISTS.
INHALATION:
IF SYSTEMS DEVELOP, MOVE VICTIM TO FRESH AIR. IF PERSISTENT, OBTAIN
MEDICAL ATTENTION.
INGESTION:
DO NOT INDUCE VOMITING. RINSE MOUTH WITH WATER THEN DRINK ONE TO TWO
GLASSES OF WATER. OBTAIN MEDICAL ATTENTION NEVER GIVE ANYTHING BY
MOUTH IF VICTIM IS UNCONSCIOUS OR IS CONVULSING.
| SECTION 5 - FIRE FIGHTING MEASURES | |
EXTINGUISHING MEDIA:
USE DRY CHEMICALS, CO2, WATER SPRAY, OR ALCOHOL IF RESISTANT TO FOAM
FIRE FIGHTING PROCEDURE:
WEAR PRESSURE POSITIVE PRESSURE SELF-CONTAINED BREATHING APPARATUS (SCBA)
| SECTION 6 - ACCIDENTAL RELEASE MEASURES | |
REMOVE ALL SOURCES OF IGNITION. RESTRICT ACCESS TO AREA, AND VENTILATE
AREA UNTIL CLEAN UP IS COMPLETE.
CONTAINED SMALL SPILLS MAY BE ABSORBED WITH NON-REACTIVE ABSORBENT AND
PLACED IN SUITABLE, COVERED, LABELED CONTAINERS. PREVENT LARGE SPILLS
FROM ENTERING WATERWAYS OR CONFINED AREAS. CONTACT EMERGENCY SERVICES
AND SUPPLIERS FOR ADVICE
| SECTION 7 - HANDLING AND STORAGE | |
STORE IN A TIGHTLY CLOSED/PROPERLY VENTED CONTAINER, STORE AWAY FROM
HEAT/MOISTURE AND STRONG OXIDIZERS
| SECTION 8 - EXPOSURE CONTROLS/PERSONAL PROTECTION | |
PROTECTIVE GLOVES: NOT REQUIRED WITH NORMAL USE
EYE PROTECTION: NOT REQUIRED WITH NORMAL USE
RESPIRATORY PROTECTION:
NOT REQUIRED UNDER NORMAL USE WITH ADEQUATE VENTILATION
VENTILATION:
ADEQUATE VENTILATION IS RECOMMENDED UNDER ANTICIPATED CONDITIONS OF
NORMAL USE
PROTECTIVE EQUIPMENT: AS REQUIRED BY COMPANY CODE
| SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES | |
SPECIFIC GRAVITY: 1.29 (TARRED CUP)
pH: 9.0-9.4 @ 25 DEG. C
SOLUBILITY: COMPLETE IN WATER
APPEARANCE/ODOR: CLEAR/SLIGHTLY FRAGRANT
FLASHPOINT: 200 DEG. F-93.3 DEG. C
LEL: NE
UEL: NE
BOILING POINT: 198 DEG. F/92 DEG. C
MELTING POINT: NOT APPLICABLE
| SECTION 10 - STABILITY AND REACTIVITY | |
THIS PRODUCT IS CONSIDERED STABLE MATERIAL, UNDER NORMAL ANTICIPATED
STORAGE AND HANDLING CONDITIONS
IT IS INCOMPATIBLE WITH OXIDIZERS AND ACIDS. KEEP AWAY FROM HEAT OR
OPEN FLAMES
| SECTION 11 - TOXICOLOGY INFORMATION | |
THIS PRODUCT CONTAINS NO PRODUCTS THAT ARE LISTED ON THE NTP, IARC,
OR OSHA CARCINOGEN LIST.
THIS PRODUCT CONFORMS TO IFRA GUIDELINES.
| SECTION 12 - ECOLOGICAL INFORMATION | |
THIS PRODUCT IS EXPECTED TO BE NON-HAZARDOUS TO AQUATIC SPECIES
| SECTION 13 - DISPOSAL CONSIDERATIONS | |
DO NOT REUSE EMPTY CONTAINERS. DISCARD EMPTY CONTAINERS.
| SECTION 14 - TRANSPORTATION INFORMATION | |
STATUS SHIPPING NAME CLASS ID# PKG GRP
DOT(USA)
IATA(AIR) NOT REGULATED
IMDG(VESSEL)
NATIONAL MOTOR FREIGHT CLASSIFICATION AND LTL CLASS: 57100 SUB 3-CLASS 60
| SECTION 15 - REGULATORY INFORMATION | |
SARA HAZARD CATEGORY:
THIS MATERIAL HAS BEEN REVIEWED ACCORDING TO THE EPA HAZARD CATEGORIES
UNDER SECTIONS 311 AND 312 OF THE SUPERFUND AMENDMENT AND REAUTHORIZATION
ACT OF 1986 (SARA TITLE III) AND IS CONSIDERED TO MEET THE FOLLOWING
CATEGORIES:
SARA 313 INFORMATION:
THIS MATERIAL CONTAINS THE FOLLOWING SUBSTANCES SUBJECT TO THE REPORTING
REQUIREMENTS OF SECTIONS 313 OF TITLE III OF THE SUPERFUND AMENDMENT AND
REAUTHORIZATION ACT OF 1986: NONE
SUBSTANCES CONTROL ACT (TSCA):
ALL INGREDIENTS ARE LISTED ON THE CHEMICAL SUBSTANCE INVENTORY EXEMPT
CALIFORNIA PROPOSITION 65: NONE
NFPA HAZARD RATINGS:
HEALTH 1
FLAMMABILITY 1
REACTIVITY 0
CANADIAN REGULATIONS:
WHMIS INFORMATION:
THE CANADIAN WORKPLACE HAZARDOUS MATERIALS INFORMATION SYSTEM (WHMIS)
CLASSIFICATION FOR THIS PRODUCT IS:
D2A - POSSIBLE, PROBABLE, OR KNOWN HUMAN CARCINOGEN ACCORDING TO
CLASSIFICATION BY IARC OR ACGIH
D2B - EYE AND SKIN IRRITANT
CPR STATEMENT:
THIS PRODUCT HAS BEEN CLASSIFIED IN ACCORDANCE WITH THE HAZARD CRITERIA
OF THE CANADIAN CONTROLLED PRODUCTS REGULATIONS (CPR) AND THE MSDS
CONTAINS ALL THE INFORMATION REQUIRED BY THE CPR
HAZARDOUS PRODUCT ACT INFORMATION:
THIS PRODUCT CONTAINS THE FOLLOWING INGREDIENTS, WHICH ARE CONTROLLED
PRODUCTS AND/OR ON THE INGREDIENT DISCLOSURE LIST (CANADIAN HPA SECTION
13 AND 14):
COMPONENTS CAS# AMOUNT %
TETRASODIUM SALT OF ETHYLENE- CAS# 000064-02-8 37%
DIAMINETETRAACETIC ACID
DISODIUM ETHYLENEDIAMINEDIACETATE CAS# 038011-25-5 1%
TRISODIUM ETHYLENEDIAMINETRIACETATE CAS# 019019-43-3 1%
TRISODIUM NITRILOTRIACETATE CAS# 005064-31-3 1%
SODIUM HYDROXIDE CAS# 001310-73-2 1%
THIS PRODUCT SHOULD BE REPORTED AS:
MIXTURE (Y)
LIQUID (Y)
PHYSICAL HAZARDS:
FIRE (N)
REACTIVITY (N)
HEALTH HAZARDS:
IMMEDIATE (N)
| SECTION 16 - OTHER INFORMATION | |
PRODUCT SALES INFORMATION: 1-800-551-5155
MSDS INFORMATION: 847-827-4100
MSDS IN COMPLIANCE WITH ANSI.Z400.1 - 1988-16-SECTION MSDS FORMAT
N.A.: NOT APPLICABLE
N.E.: NOT ESTABLISHED
MSDS PREPARED BY: L. FIELDS
DISCLAIMER:
THIS INFORMATION IS PROVIDED IN GOOD FAITH, BUT NO WARRANTY, EXPRESSED OR
IMPLIED IS MADE.
THE MANUFACTURER BELIEVES IT IS ACCURATE TO THE BEST OF ITS KNOWLEDGE, AND
RELIES ONLY TO SPECIFIC MATERIAL DESIGNATED HEREIN.