| Common Name: | 1041 12V RECHARGE LIGHT W/CHINESE, WHITE CREE 70LED BULB |
| Manufacturer: | ZHUHAI FULLFILL METAL WARE & PLASTIC PRODUCT CHINA |
| SDS Revision Date: | (No Date) |
| SDS Format: | No Format Specified |
| Item Number(s): | 5RHR9 |
| Manufacturer Model Number(s): |
SDS Table of Contents
Click the desired link below to jump directly to that section in the SDS.
ZHUHAI FULLFILL METAL WARE & PLASTIC PRODUCT MANUFACTURE
BLOCK 5. PAK CHAT INDUSTRIAL SITE.
DOUMEN, ZHUHAI.
CHINA
TEL: (0756)5223028 5223078
FAX: (0756)3939691
E-MAILL: ACCUHK@126.COM
MATERIAL SAFETY DATA SHEET
| SECTION 1: GENERAL INFORMATION |  |
PRODUCT NAME: 1041 12V RECHARGE LIGHT W/CHINESE, WHITE CREE 70#LED BULB,.
PACKING: CLAM SHELL AND CARD
| SECTION 2: HAZARDOUS INGREDIENTS | |
THERE ARE NO KNOWN HEALTH HAZARDS FROM EXPOSURE TO THE PLASTIC FLASHLIGHT.
MATERIAL AND PARTS:
PART MATERIAL WEIGHT ACTUAL
PERCENTAGE WEIGHT
LENS PLASTIC (PVC) 0.20% 0.51 G/PACK
LENS/BODY/TRAIL CAP ORING PLASTIC (RUBBER) 0.06% 0.15 G/PACK
REFLECTOR PLASTIC (ABS) 0.58% 1.46 G/PACK
LED PRESS COVER PLASTIC (ABS) 0.31% 0.77 G/PACK
SPACE TUBE PLASTIC (ABS) 0.40% 1 G/PACK
SWITCH HOLDER PLASTIC (ABS) 1.25% 3.16 G/PACK
SWITCH COVER PLASTIC (ABS) 0.17% 0.43 G/PACK
SWITCH NUT PLASTIC (TPE) 0.10% 0.25 G/PACK
ELECTRIC PLASTIC PLASTIC (ABS) 0.35% 0.89 G/PACK
BATTERY HOLDER 1 PLASTIC (ABS) 0.82% 2.07 G/PACK
BATTERY HOLDER 2 PLASTIC (ABS) 0.86% 2.17 G/PACK
RECHARGE HOLDER1 PLASTIC (ABS) 1.58% 3.98 G/PACK
RECHARGE HOLDER2 PLASTIC (ABS) 1.90% 4.78 G/PACK
RECHARGE SCREW PLASTIC (ABS) 0.26% 0.65 G/PACK
HEAD ALUMINUM 15.56% 39.24 G/PACK
LED FIXING HOLDER IRON 0.71% 1.8 G/PACK
FIXING PLATE IRON 0.38% 0.96 G/PACK
ANODE PLATE 2 IRON 0.03% 0.08 G/PACK
CATHODE PLATE2 IRON 0.20% 0.51 G/PACK
FIXING SCREW IRON 0.22% 0.56 G/PACK
ANODE SPRING IRON 0.04% 0.1 G/PACK
CATHODE SPRING IRON 0.17% 0.44 G/PACK
CATHOND PLATE 1 IRON 0.21% 0.54 G/PACK
ANODE PLATE 1 IRON 0.03% 0.08 G/PACK
RECHARGE CATHEODE PLATE IRON 0.75% 1.89 G/PACK
RECHARGE SPRING IRON 0.11% 0.27 G/PACK
RECHARE ELECTRIC POLE IRON 1.50% 3.79 G/PACK
RECHARE FIXING COVER IRON 0.19% 0.48 G/PACK
RECHARE ANODE NUT IRON 0.13% 0.33 G/PACK
BODY ALUMINUM 24.34% 61.38 G/PACK
END CAP ALUMINUM 13.08% 33 G/PACK
BULB CREE LED 0.73% 1.85 G/PACK
SWITCH 0.57% 1.43 G/PACK
RECHARGE BATTERY 12.05% 30.4 G/PACK
ELECTRIC LINE 0.13% 0.33 G/PACK
RESISTANCE 0.17% 0.42 G/PACK
PCB 0.82% 2.06 G/PACK
CARD PULP 1.98% 5 G/PACK
CLAM SHELL PLASTIC (PVC) 17.05% 43 G/PACK
| SECTION 3: PHYSICAL DATA | |
WEIGHT: 252.21 G / PACK
LIFETIME OF THE BULB: MORE THAN 10 HOURS
MELTING POINT OF THE PLASTIC: MORE THAN 140 DEG. C
SPECIFICATION OF THE LIGHT BULB: 3.3V 0.35A LED
| SECTION 4: ENVIRONMENTAL CONDITIONS | |
OPERATING TEMPERATURE: 0 DEG. C TO 40 DEG. C, BEST AT 25 DEG. C
STORAGE TEMPERATURE: -20 DEG. C TO 60 DEG. C, BEST AT 25 DEG. C
NORMAL OPERATION HUMIDITY RANGE: BELOW 85%R.H. NON-CONDENSING
| SECTION 5: MECHANICAL TESTS AND REQUIREMENTS | |
DROP TEST:
DROP HEIGHT:
3 FEET HEIGHT ONTO A CONCRETE FLOOR COVERED WITH 1/8 INCH VINYL TILE.
METHOD: 3 TIMES IN TOTAL. DROP 3 DIFFERENT SURFACES OF THE CASE.
EXPECTED RESULT: THE FLASHLIGHT SHOULD STILL WORK AS NORMAL
SURFACE: DAMAGE AND RUSTING ARE NOT PERMITTED
| SECTION 6: FIRE & EXPLOSION HAZARDS | |
ELIMINABILITY: IGNITION TEMPERATURE OF FRONT-CAP MATERIAL: 200 DEG. C
FIRE EXTINGUISHING MATERIALS:
USE EXTINGUISHING AGENTS SUITABLE FOR SURROUNDING FIRE, SUCH AS WATER
SPRAY, FOAM, DRY POWDER, OR CO2.
UNUSUAL FIRE AND EXPLOSION HAZARDS:
WHEN EXPOSED TO HIGH TEMPERATURE, TOXIC FUMES MAY BE RELEASED FROM BROKEN
PLASTIC FLASHLIGHT.
FIRE FIGHTING PROTECTIVE EQUIPMENT:
A SELF-CONTAINED BREATHING APPARATUS AND SUITABLE PROTECTIVE CLOTHING
SHOULD BE WORN IN FIRE CONDITIONS.
HAZARDOUS DECOMPOSITION PRODUCTS: CO, CO2
| SECTION 7: HEALTH HAZARDS | |
1. FLASHLIGHT MATERIALS:
THERE ARE NO KNOWN HEALTH HAZARDS FROM EXPOSURE TO THE PLASTIC FLASHLIGHT.
NO ADVERSE EFFECTS ARE EXPECTED FROM OCCASIONAL EXPOSURE TO BROKEN
FLASHLIGHT. AT A MATTER OF GOOD PRACTICE, AVOID PROLONGED OR EXPOSURE TO
BROKEN FLASHLIGHT UNLESS THERE IS ADEQUA
2. EMERGENCY AND FIRST AID PROCEDURES:
GLASS CUTS:
PERFORM NORMAL FIRST AID PROCEDURES. SEEK MEDICAL ATTENTION AS REQUIRED.
| SECTION 7: REACTIVITY DATA | |
STABILITY: STABLE