| Common Name: | ALUMINUM OXIDE COATED ABRASIVE, ALCOAT001SG OUTBOUND |
| Manufacturer: | SAINT-GOBAIN ABRASIVES |
| SDS Revision Date: | 2/26/2010 |
| SDS Format: | No Format Specified |
| Item Number(s): | 1EFB9, 1YEY9, 1YEZ1, 1YEZ2, 1YEZ3, 1YEZ4, 1YEZ5, 1YEZ6, 1YEZ7, 1YEZ8, 1YEZ9, 1YFA1, 1YFA2, 1YFA3, 1YFA4, 1YFA5, 1YFA6, 1YFA7, 1YFA8, 1YFA9, 1YFG5, 1YFG6, 1YFG7, 1YFG8, 1YFG9, 1YFH1, 1YFN2, 1YFN3, 2KMR1, 2KMR2, 2KMR3, 2KMR4, 2KMR5, 2KMR6, 2KMR7, 2KMR8, 2KMR9, 2KMT1, 2KMT2, 2KMT3, 2KMT4, 2KMT5, 2KMT6, 2KMT7, 2KMT8, 2KMT9, 2KMV9, 2KMW1, 2KMW2, 2KMW3, 2KMW4, 2KMW5, 2KMW6, 2KMW7, 2KMW8, 2KMW9, 2KMX1, 2KMX2, 2KMX3, 2KMX4, 2KMX5, 2KMX6, 2KMX7, 2KMX8, 2KMX9, 2KMY1, 2KMY2, 4MAC1, 5CJF4, 5CJF6 |
| Manufacturer Model Number(s): |
SDS Table of Contents
Click the desired link below to jump directly to that section in the SDS.
NORTON
MATERIAL SAFETY DATA SHEET
DATE PRINTED: FEB 26, 2010
MSDS NO.:
ALCOAT001SG
OUTBOUND
ALUMINUM OXIDE COATED ABRASIVE
| SECTION 1. CHEMICAL PRODUCT AND COMPANY INFORMATION |  |
PRODUCT NAME: ALUMINUM OXIDE COATED ABRASIVE
TRADE NAME:
SEEDED GEL CAP CODES: R9XX, F9XX, E9XX, H9XX, A9XX
MANUFACTURER(4):
SAINT-GOBAIN ABRASIVES, INC.
ONE NEW BOND STREET
WORCESTER, MA 01615-0008
(508) 795-5000
REVISION DATE: 2/26/2010
MSDS PRINT FORMAT: NUSA
| SECTION 2. COMPOSITION/INFORMATION ON INGREDIENTS | |
SUBSTANCE DESCRIPTION PERCENT CAS#
ALUMINUM OXIDE, NON-FIBROUS 15.000 - 25.000 1344-28-1
CLOTH OR PAPER BACKING 45.000 - 55.000 N/A
CURED PHENOLFORMALDEHYDE RESIN 5.000 - 27.000 9003-35-4
ANIMAL GLUE BOND 5.000 - 27.000 N/A
CURED UREA FORMALDEHYDE RESIN 5.000 - 27.000 9011-05-6
OTHER: NOT APPLICABLE
| SECTION 3. HAZARDS IDENTIFICATION | |
INHALATION ACUTE EXPOSURE EFFECTS:
DUST MAY BE SLIGHTLY IRRITATING TO EYES AND RESPIRATORY TRACT AT HIGH
CONCENTRATIONS.
INHALATION CHRONIC EXPOSURE EFFECTS:
CHRONIC:
MAY AFFECT BREATHING CAPACITY.
FOR PRODUCTS CONTAINING PHENOL/FORMALDEHYDE RESIN, DUST GENERATED FROM
INTENDED USE MAY CONTAIN TRACE AMOUNTS OF PHENOL AND FORMALDEHYDE WHICH
UNDER EXCESSIVE EXPOSURE MAY CAUSE SKIN SENSITIZATION AND AIRWAY
OBSTRUCTION.
FOR PRODUCTS CONTAINING INORGANIC FLUORIDES:
EXCESSIVE EXPOSURE TO INORGANIC FLUORIDES HAVE BEEN SHOWN TO INCREASE BONE
DENSITY.
EYE CONTACT ACUTE EXPOSURE EFFECTS: DUST MAY IRRITATE EYES.
SKIN CONTACT ACUTE EXPOSURE EFFECTS:
SOME MAY EXPERIENCE SKIN IRRITATION FROM DUST.
INGESTION ACUTE EXPOSURE EFFECTS:
NO KNOWN ADVERSE EFFECTS, BUT INGESTION NOT RECOMMENDED.
| SECTION 4. FIRST AID MEASURES | |
INHALATION:
REMOVE TO FRESH AIR. IF BREATHING HAS STOPPED, GIVE ARTIFICIAL RESPIRATION.
GET MEDICAL ATTENTION IMMEDIATELY.
SKIN CONTACT:
WASH AFFECTED AREAS WITH SOAP AND WATER. OBTAIN MEDICAL ASSISTANCE.
EYE CONTACT:
WASH WITH LARGE AMOUNTS OF WATER. OBTAIN FIRST AID AND MEDICAL ASSISTANCE,
IF NEEDED.
INGESTION:
CALL POISON CONTROL CENTER, HOSPITAL EMERGENCY ROOM OR PHYSICIAN
IMMEDIATELY.
| SECTION 5. FIRE FIGHTING MEASURES | |
FIRE FIGHTING PROCEDURES: NOT APPLICABLE
HAZARDOUS PRODUCTS/COMBUSTION: NONE.
HAZARD RATING SOURCE:
NFPA:
HEALTH 1
FLAMMABILITY 0
REACTIVITY 0
OTHER
| SECTION 6. ACCIDENTAL RELEASE MEASURES | |
CLEAN-UP: FOLLOW NORMAL CLEAN UP PROCEDURES.
| SECTION 7. HANDLING AND STORAGE | |
HANDLING: HANDLE WITH ADEQUATE VENTILATION FOR NUISANCE DUST.
| SECTION 8. EXPOSURE CONTROLS/PERSONAL PROTECTION | |
VENTILATION PROTECTION:
RECOMMEND USING LOCAL EXHAUST VENTILATION WHEN GENERAL VENTILATION IS NOT
KEEPING THE AIRBORNE CONCENTRATION BELOW THE TLV.
RESPIRATORY PROTECTION:
RESPIRATORS ARE REQUIRED WHEN AIRBORNE CONTAMINANT LEVELS EXCEED THE
TLV(S).
EYE PROTECTION:
ALWAYS WEAR SAFETY GLASSES OR SOME TYPE OF EYE PROTECTION WHILE SANDING.
OTHER PROTECTION:
USE OF THIS PRODUCT MAY CREATE ELEVATED SOUND LEVELS. HEARING PROTECTION
SHOULD BE WORN WHERE REQUIRED (SEE OSHA 29 CFR 1910.134 AND OTHER
APPLICABLE REGULATIONS).
| SECTION 9. PHYSICAL AND CHEMICAL PROPERTIES | |
APPEARANCE & ODOR: SOLID ARTICLE. ODORLESS.
| SECTION 10. STABILITY AND REACTIVITY | |
INCOMPATIBILITIES: AVOID ACIDS OF ALL TYPES WITH A pH <4.0.
DECOMPOSITION:
IN USE, DUST AND DECOMPOSING ODORS MAY BE GENERATED. IN MOST CASES, THE
MATERIAL REMOVED FROM THE WORKPLACE WILL BE SIGNIFICANTLY GREATER THAN THE
SANDPAPER COMPONENTS. COOLANTS MAY PRODUCE OTHER DECOMPOSITION PRODUCTS.
FOR PRODUCTS CONTAINING PHENOL AND FORMALDEHYDE RESIN, THERMAL
DECOMPOSITION MAY PRODUCE TRACE AMOUNTS OF PHENOL AND FORMALDEHYDE.
FOR PRODUCTS CONTAINING INORGANIC FLUORIDES, THERMAL COMPOSITION MAY
PRODUCE TRACE AMOUNTS OF FLUORIDES.
| SECTION 11. TOXICOLOGICAL INFORMATION | |
CARCINOGENICITY: NOT APPLICABLE
LD50/LC50: VALUES ARE NOT APPROPRIATE OR AVAILABLE.
| SECTION 12. ECOLOGICAL INFORMATION | |
CHEMICAL FATE: NOT APPLICABLE
| SECTION 13. DISPOSAL CONSIDERATIONS | |
WASTE DISPOSAL:
USE STANDARD LANDFILL METHODS CONSISTENT WITH APPLICABLE FEDERAL, STATE,
PROVINCIAL AND LOCAL LAWS.
| SECTION 14. TRANSPORT INFORMATION | |
HAZARD CLASS:
THIS PRODUCT IS NOT HAZARDOUS AS DEFINED BY THE DEPARTMENT OF
TRANSPORTATION.(USA)
THIS PRODUCT IS "NOT REGULATED" UNDER THE TRANSPORTATION OF DANGEROUS GOODS
ACT. (CAN)
| SECTION 15. REGULATORY INFORMATION | |
EXPOSURE LIMITS/REGULATORY INFORMATION:
SUBSTANCE DESCRIPTION UNITS OSHA ACGIH MOL
ALUMINUM OXIDE, NON-FIBROUS MG/M3 15.0000 10.0000 10.0000
CLOTH OR PAPER BACKING PPM 0.0000 0.0000 0.0000
CURED PHENOLFORMALDEHYDE RESIN PPM 0.0000 0.0000 0.0000
ANIMAL GLUE BOND PPM 0.0000 0.0000 0.0000
CURED UREA FORMALDEHYDE RESIN PPM 0.0000 0.0000 0.0000
LEGEND:
EXPOSURE LIMIT DESCRIPTIONS:
CA PROP 65: NOT APPLICABLE
TSCA:
SECTION 8(B) - INVENTORY STATUS:
ALL COMPONENTS OF THIS PRODUCT ARE REGISTERED UNDER THE REGULATIONS OF THE
TOXIC SUBSTANCE CONTROL ACT.
DOMESTIC SUBSTANCE LIST:
ALL COMPONENTS OF THIS PRODUCT ARE FOUND ON THE DOMESTIC SUBSTANCE LIST.
| SECTION 16. OTHER INFORMATION | |
DISCLAIMER:
THE INFORMATION AND RECOMMENDATIONS SET FORTH HEREIN ARE TAKEN FROM SOURCES
BELIEVED TO BE ACCURATE AS OF THE DATE HEREOF; HOWEVER, THE COMPANY MAKES
NO WARRANTY WITH RESPECT TO THE ACCURACY OF THE INFORMATION OR THE
SUITABILITY OF THE RECOMMENDATIONS, AND ASSUMES NO LIABILITY TO ANY USER
THEREOF.
KEY TO ABBREVIATIONS:
EQ=EQUAL
LT=LESS THAN
GT=GREATER THAN
AP=APPROXIMATELY
TR=TRACE
ND=NO DATA AVAILABLE