| Common Name: | NICKEL CADMIUM RECHARGEABLE BATTERY |
| Manufacturer: | BST POWER CHINA |
| SDS Revision Date: | 1/1/2007 |
| SDS Format: | ANSI-OSHA |
| Item Number(s): | 13M589, 1BP72, 1VCU3, 1VCU4, 1VCU5, 1VCU6, 1VCU9, 1VCV1, 23NU55, 23NU56, 23NU57, 2NER6, 2NER7, 2NER8, 2NER9, 2PFV7, 2PFV8, 2PFV9, 2XLD5, 2XLD6, 2XLD7, 2XLE1, 2XLE2, 2XLE3, 2XLE7, 2XLE8, 2XLE9, 2XLF1, 2XLF2, 2XLF3, 2XLW3, 2XLW4, 39L033, 39L034, 39L036, 3BA32, 3BA33, 3FA36, 3FA37, 3FA41, 3GA44, 3XE27, 3XE28, 3XE29, 3XE30, 3XE31, 3XE32, 4WT20, 4WT21, 4XT48 |
| Manufacturer Model Number(s): |
SDS Table of Contents
Click the desired link below to jump directly to that section in the SDS.
MATERIAL SAFETY DATA SHEET
BST RECHARGEABLE BATTERY
DOCUMENT NO.: MSDS2583
IDENTITY (AS USED ON LABEL AND LIST): NICKEL CADMIUM RECHARGEABLE BATTERY
NOTE:
BLANK SPACES ARE NOT PERMITTED IF ANY ITEM IS NOT APPLICABLE OR NO
INFORMATION IS AVAILABLE, THE SPACE MUST BE MARKED TO INDICATE THAT.
| SECTION I - INFORMATION OF MANUFACTURER |  |
MANUFACTURER'S NAME: BST POWER (SHENZHEN) LIMITED
ADDRESS (NUMBER, STREET, CITY STATE, AND ZIP CODE):
NO.9, LONGXING ROAD, XINTANG NEW INDUSTRIAL ZONE
DAKANG VILLAGE, HENGGANG TOWN, LONGGANG
DISTRICT, SHENZHEN 518115
EMERGENCY TELEPHONE NUMBER:
TELEPHONE NUMBER FOR INFORMATION: 86-755-84260303
DATE PREPARED: 2007-JAN-1
SIGNATURE OF PREPARER (OPTIONAL):
| SECTION II - HAZARDOUS INGREDIENTS / IDENTITY INFORMATION | |
HAZARDOUS COMPONENTS:
DESCRIPTION APPROXIMATE % OF TOTAL WEIGHT
NICKEL HYDRIDE 31%
CADMIUM 39%
ELECTROLYTE 7%
CO 3%
OTHER 20%
| SECTION III - PHYSICAL / CHEMICAL CHARACTERISTICS | |
BOILING POINT: N.A.
SPECIFIC GRAVITY (H2O=1): N.A.
VAPOR PRESSURE (MMHg): N.A.
MELTING POINT: N.A.
VAPOR DENSITY (AIR=1): N.A.
EVAPORATION RATE (BUTYL ACETATE): N.A.
SOLUBILITY IN WATER: N.A.
APPEARANCE AND ODOR: CYLINDRICAL SHAPE, ODORLESS
| SECTION IV - HAZARD CLASSIFICATION | |
CLASSIFICATION: N.A.
| SECTION V - REACTIVITY DATA | |
STABILITY:
UNSTABLE ( )
STABLE (X)
CONDITIONS TO AVOID:
INCOMPATIBILITY (MATERIAL TO AVOID):
HAZARDOUS DECOMPOSITION OR BYPRODUCTS:
HAZARDOUS POLYMERIZATION:
MAY OCCUR ( )
WILL NOT OCCUR (X)
CONDITIONS TO AVOID:
| SECTION VI - HEALTH HAZARD DATE | |
ROUTE(S) OF ENTRY:
INHALATION?: N.A.
SKIN?: N.A.
INGESTION?: N.A.
HEALTH HAZARD (ACUTE AND CHRONIC) / TOXICOLOGICAL INFORMATION:
IN CASE OF ELECTROLYTE LEAKAGE, SKIN WILL BE ITCHY WHEN CONTAMINATED WITH
ELECTROLYTE.
IN CONTACT WITH ELECTROLYTE CAN CAUSE SEVERE IRRITATION AND CHEMICAL BURNS.
INHALATION OF ELECTROLYTE VAPORS MAY CAUSE IRRITATION OF THE UPPER
RESPIRATORY TRACT AND LUNGS
| SECTION VII - FIRST AID MEASURES | |
FIRST AID PROCEDURES:
IF ELECTROLYTE LEAKAGE OCCURS AND MAKES CONTACT WITH SKIN, WASH WITH PLENTY
OF WATER IMMEDIATELY.
IF ELECTROLYTE COMES INTO CONTACT WITH EYES, WASH WITH COPIOUS AMOUNTS OF
WATER FOR FIFTEEN MINUTES, AND CONTACT A
IF ELECTROLYTE VAPORS ARE INHALED, PROVIDE FRESH AIR AND SEEK MEDICAL
ATTENTION IF RESPIRATORY IRRITATION DEVELOPS. VENTILATE THE CONTAMINATED
AREA.
| SECTION VIII - FIRE AND EXPLOSION HAZARD DATA | |
FLASH POINT (METHOD USED): N.A.
IGNITION TEMP.: N.A.
FLAMMABLE LIMITED: N.A.
LEL: N.A.
EXTINGUISHING MEDIA: CARBON DIOXIDE, DRY CHEMICAL OR FOAM EXTINGUISHERS
SPECIAL FIRE FIGHTING PROCEDURES: N.A.
UNUSUAL FIRE AND EXPLOSION HAZARDS:
DO NOT DISPOSE OF BATTERY IN FIRE - MAY EXPODE.
DO NOT SHORT-CIRCUIT BATTERY - MAY CAUSE BURNS.
| SECTION IX - ACCIDENTAL RELEASE OR SPILLAGE | |
STEPS TO BE TAKEN IN CASE MATERIAL IS RELEASED OR SPILLED:
BATTERIES THAT ARE LEAKAGE SHOULD BE HANDLED WITH RUBBER GLOVES.
AVOID DIRECT CONTACT WITH ELECTROLYTE.
MANUFACTURER RESERVES THE RIGHT TO ALTER OR AMEND THE DESIGN, MODEL AND
SPECIFICATION WITHOUT PRIOR NOTICE