| Common Name: | BPU100, BPU500, BPU200, BRU150, BHT150, AAA1515, AW99, AW124, AW412, AW430, AW80 |
| Manufacturer: | SPC |
| SDS Revision Date: | 12/11/2009 |
| SDS Format: | No Format Specified |
| Item Number(s): | 1EFN4, 1EFN5, 2GU48, 2GU49, 2GU50, 2GU51, 5FZ78 |
| Manufacturer Model Number(s): |
SDS Table of Contents
Click the desired link below to jump directly to that section in the SDS.
SPC A BRADY BUSINESS
BRADY
MATERIAL SAFETY DATA SHEET
DOCUMENT NUMBER: MSDS-UPR
WE HELP MAKE THE WORLD A CLEANER PLACE!
SORBENT PRODUCTS COMPANY - PROPRIETARY PRINTED COPIES ARE FOR REFERENCE
ONLY.
DATE: DECEMBER 11, 2009
| 1. IDENTIFICATION OF THE SUBSTANCE & |  |
PREPARATION/COMPANY/UNDERTAKING.
1.1 IDENTIFICATION OF THE SUBSTANCE OR PREPARATION.
BPU100 AW99 BM100 GPS15-DP HAZ412 MRO12P
BPU500 AW124 CH15P GPS30-DP HAZ100-7 MRO15; P; DP
BPU200 AW412 CH30DP GPS200 HAZ1818; -2 MRO15DPS
BRU150 AW430 CH100 GPX153 P HT15 MRO24; -DP
BHT150 AW806 CH1212 GPX303 DP HT30 MRO30; P; DP
AW1818; -2 DTA25 H300 HT153 MRO36; P
BM15 GP30 H3844 HT303 MRO50
BM20 GP100 HAZ99 HT555 MRO100, -2
BM30; X GP200 300GRNW LITE WIPES MRO125
AAA1515 BM40 GP500 HAZ124 M200 MRO150DND
MRO200 UN15DPS UXT100-J
MRO300; F UN510 UXT200
MRO315P UN810 UXT500
MRO350; DP UN1019 UXT505
MRO450 UN1113 UXT514
MRO777 UN1201 UXT519
MRO1113 UN1719 UXT538
MRO WIPES UN3800 UXT100
MXU1000 UXT15P
TUF150 UXT30DP
1.2 COMPANY/UNDERTAKING IDENTIFICATION:
MANUFACTURER/DISTRIBUTOR:
SPC
645 HOWARD AVENUE
SOMERSET, NJ 08873
USA
TEL: +1 732 302 0080
EMERGENCY: +1 800 333 7672 (24-HOURS)
MANUFACTURER/DISTRIBUTOR:
SPC INTERNATIONAL BVBA
ATEALAAN 71, B2200
HERENTALS, BELGIUM
TEL: +32 14 32 18 55
EMERGENCY:
+ TEL: +32 14 32 18 55
| 2. COMPOSITION/INFORMATION ON INGREDIENTS. | |
POLYPROPYLENE CAS NUMBER: 9003-07-0 >99%
CARBON BLACK CAS NUMBER: 1333-86-4 <0.1% (GREY/CHARCOAL PRODUCTS
ONLY)
GREEN PIGMENT CAS NUMBER: 1328-53-6 <0.1% (GREEN PRODUCTS ONLY)
YELLOW PIGMENT CAS NUMBER: 5580-57-4 <0.1% (YELLOW PRODUCTS ONLY)
PROPRIETARY CAS NUMBER: PROPRIETARY <1.0%
SURFACTANT
| 3. HAZARDS IDENTIFICATION. | |
THIS PRODUCT IS NOT DANGEROUS IN ITS UNUSED FORM AND CONTAINS NO HAZARDOUS
INGREDIENTS.
| 4. FIRST AID MEASURES/HEALTH INFORMATION/PROTECTION. | |
EYE CONTACT: NOT APPLICABLE, PRODUCT IS INERT
INGESTION: NOT APPLICABLE, FIRST AID IS NOT NORMALLY REQUIRED.
INHALATION: NOT APPLICABLE
SKIN CONTACT:
NOT APPLICABLE, PRODUCT IS INERT, EXCEPT IF PRODUCT IS MELTED USE GLOVES.
FOR HOT MELTED PRODUCT, IMMERSE IN OR FLUSH AFFECTED AREA WITH WATER TO
DISSIPATE HEAT, THEN OBTAIN MEDICAL ATTENTION.
EXPOSURE LIMITS: NONE
THRESHOLD LIMITS: NONE
PERSONAL PROTECTION: NONE (AMBIENT CONDITIONS)
NPCA-HMIS RATING:
HEALTH 0
FLAMMABILITY 1
REACTIVITY 0
NFPA-704 RATING:
HEALTH 0
FLAMMABILITY 1
REACTIVITY 0
| 5. FIRE-FIGHTING MEASURES. | |
BE CAUTIOUS OF HOT MELTED POLYPROPYLENE
USE WATER SPRAY TO COOL FIRE, EXPOSED SURFACES, AND TO PROTECT PERSONNEL.
ISOLATE PRODUCT FROM FIRE.
EXTINGUISH FIRE WITH WATER SPRAY.
RESPIRATORY AND EYE PROTECTION IS REQUIRED FOR FIRE FIGHTING PERSONNEL.
DECOMPOSITION PRODUCTS UNDER FIRE CONDITIONS:
OXYGEN-LEAN CONDITIONS MAY CAUSE MONOXIDE AND IRRITATING SMOKE.
| 6. ACCIDENTAL RELEASE MEASURES. | |
LAND:
RECOVER MATERIAL AND PLACE IN SUITABLE CONTAINER FOR REUSE OR FOR DISPOSAL
IN CONFORMANCE WITH LOCAL REGULATIONS.
WATER:
RECOVER MATERIAL AND PLACE IN SUITABLE CONTAINER FOR REUSE OR FOR DISPOSAL
IN CONFORMANCE WITH LOCAL REGULATIONS.
| 7. HANDLING AND STORAGE. | |
7.1 HANDLING.: NO PRECAUTIONS NOTED-SEE LOCAL REGULATION IF NEEDED.
7.2 STORAGE.:
STORAGE TEMPERATURE: AMBIENT, NO DIRECT SUNLIGHT
STORAGE PRESSURE: ATMOSPHERIC
| 8. EXPOSURE CONTROLS/PERSONAL PROTECTION. | |
8.1 EXPOSURE LIMIT VALUES: NONE
8.2 EXPOSURE CONTROLS.:
8.2.1 OCCUPATIONAL EXPOSURE CONTROLS:
8.2.1.1 RESPIRATORY PROTECTION: NOT APPLICABLE
8.2.1.2 HAND PROTECTION: NOT APPLICABLE
8.2.1.3 EYE PROTECTION: NOT APPLICABLE
8.2.1.4 SKIN PROTECTION: NOT APPLICABLE
8.2.2 ENVIRONMENTAL EXPOSURE CONTROLS: NO DATA AVAILABLE
| 9. PHYSICAL AND CHEMICAL PROPERTIES. | |
9.1 GENERAL INFORMATION:
ASPECT:
PADS, ROLLS, BOOMS, PILLOWS, BILGE BOOMS, PARTICULATE, CARTRIDGES,
MICROFIBERS, SOCS, DRUM TOP COVER
PHYSICAL STATE: SOLID
COLOR: WHITE
ODOR: MAY BE MILD HYDROCARBON
9.2 IMPORTANT HEALTH, SAFETY, AND ENVIRONMENTAL INFORMATION:
pH: NOT APPLICABLE
BOILING POINT: NOT APPLICABLE
DENSITY: 0.04-0.06 GRAM/CC
ODOR: MAY BE MILD HYDROCARBON
MELTING POINT:
160 C
320 F
SPECIFIC GRAVITY: 0.90-0.92
EXPLOSIVE PROPERTIES: NO DATA AVAILABLE
VAPOR PRESSURE: NO DATA AVAILABLE
VAPOR DENSITY: NO DATA AVAILABLE
SOLUBILITY IN WATER: NONE
FLASH POINT:
>315 C
>600 F (ESTIMATED)
AUTO-IGNITION TEMPERATURE:
>315 C
>600 F (ESTIMATED)
9.3 OTHER INFORMATION:
| 10. STABILITY AND REACTIVITY. | |
10.1 CONDITIONS TO AVOID:
HIGHER TEMPERATURES AND DIRECT SUNLIGHT (CHEMICAL RESISTANCE IS EXCELLENT)
HIGHLY STABLE, BUT TEMPERATURES OVER 480 F MAY CAUSE DEGRADATION.
10.2 MATERIALS TO AVOID: NO DATA AVAILABLE
10.3 HAZARDOUS DECOMPOSITION PRODUCTS:
UNDER FIRE AND OXYGEN-LEAN CONDITIONS MAY CAUSE MONOXIDE AND IRRITATING
SMOKE.
| 11. TOXICOLOGY INFORMATION. | |
PRODUCT IS INERT.
| 12. ECOLOGICAL INFORMATION. | |
12.1 ECOTOXICITY.: NO DATA AVAILABLE.
12.2 MOBILITY.: INERT PRODUCT.
12.3 PERSISTENCE AND DEGRADABILITY.: NO DATA AVAILABLE.
12.4 BIOACCUMULATIVE POTENTIAL.: NO DATA AVAILABLE.
12.5 OTHER ADVERSE EFFECTS.: NO DATA AVAILABLE.
| 13. DISPOSAL CONSIDERATIONS. | |
IN ACCORDANCE WITH ANY APPLICABLE FEDERAL, STATE, AND LOCAL LAW.
| 14. TRANSPORT INFORMATION. | |
NO DATA AVAILABLE.
| 15. REGULATORY INFORMATION. | |
DEPARTMENT OF TRANSPORTATION (DOT) HAZARD CLASS: NOT REGULATED
DEPARTMENT OF TRANSPORTATION (DOT) IDENTIFICATION NO.: NONE
TSCA: THIS PRODUCT IS LISTED IN THE TSCA INVENTORY
CERCLA: THIS PRODUCT IS NOT SUBJECT TO REPORTING.
SARA: (TITLE IN) NOT HAZARDOUS, NO REPORTABLE INGREDIENTS
| 16. OTHER INFORMATION. | |
WHILE SORBENT PRODUCTS COMPANY BELIEVES THAT THE DATA SET FORTH IN THIS
SHEET IS ACCURATE, SORBENT PRODUCTS COMPANY MAKES NO WARRANTY WITH RESPECT
THERETO, AND EXPRESSLY DISCLAIMS ALL LIABILITY FOR RELIANCE THEREON.
PLEASE CONSIDER THE ASSISTANCE OF INDIVIDUALS TRAINED IN PROPER EVALUATION
FOR HEALTH-RELATED DATA.
73EN08-01 MSDS FORM