| Common Name: | SCOTCH-BRITE SURFACE CONDITIONING PRODUCTS, AVFN (SHEETS, ROLLS, DISCS (INCLUDES |
| Manufacturer: | 3M |
| SDS Revision Date: | 5/24/2010 |
| SDS Format: | No Format Specified |
| Item Number(s): | 1DAE2, 6RP33, 6RP35, 6RP36, 6RP37, 6RP38, 6RP39, 6RP40, 6RP41, 6RP42, 6RP44, 6RP45, 6RP46, 6RP47, 6RP48, 6RP49, 6RP50, 6RP51, 6RP52, 6RP53, 6RP54, 6RR22, 6RR23, 6RR24, 6RR25, 6RR26, 6RR46, 6RR48, 6RR49, 6RR50, 6RR51, 6RR57, 6RR58, 6RR64, 6RR65, 6RR66, 6RR67, 6RR68, 6RR69, 6RR70, 6RR72, 6RR74, 6RR75, 6RR79, 6RR83, 6RR89, 6RT01, 6RT02, 6RT03, 6RT04, 6RT05, 6RT06, 6RT07, 6RT08, 6RT09, 6RT10, 6RT11, 6RT12, 6RT13, 6RT25, 6RT26, 6RT33, 6RT34, 6RT36, 6RT40, 6RT41, 6RT43, 6RT44, 6RT45, 6RT46, 6RT47, 6RT48, 6RT49, 6RT53, 6RT54, 6RT55, 6RT56, 6RT57, 6RT61, 6RT62, 6RT63, 6RT64, 6RT89, 6RT90, 6RT91, 6RT92, 6RV10, 6RV11, 6RV13, 6RV14, 6RV16, 6RV17, 6RV18, 6RV19, 6RV20, 6RV23, 6RV24, 6RV25, 6RV26, 6RV27, 6RV56, 6RV57, 6RV59, 6RV60, 6RV69, 6RV71, 6RV72, 6RV73, 6RV77, 6RV80, 6RV82, 6RV83, 6RV84, 6RV85, 6RV93, 6RV94, 6RV96, 6RV97, 6RW07, 6RW08, 6RW09, 6RW11, 6RW12, 6RW13, 6RW19, 6RW20, 6RW22, 6RW23, 6RW25, 6RW26, 6RW27, 6RW28, 6RW53, 6RW54, 6RW55, 6RW67, 6RW68, 6RW69, 6RW70, 6RW94, 6RW97, 6RW98, 6RW99, 6RX02, 6RX03, 6RX04, 6RX05, 6RX06, 6RX07, 6RX08, 6RX09, 6RX10, 6RX11, 6RX12, 6RX13, 6RX15, 6RX17, 6RX18, 6RX19, 6RX23, 6RX48, 6RX50, 6RX53, 6RX54, 6RX55, 6RX56, 6RX57, 6RX58, 6RX59, 6RX60, 6RX61, 6RX62, 6RX63, 6RX67, 6RX68, 6RX82, 6RX84, 6RX85, 6RX86, 6RZ04, 6RZ05, 6RZ06, 6RZ09, 6RZ11, 6RZ13, 6RZ14, 6RZ15, 6RZ17, 6RZ24, 6RZ25, 6RZ27, 6RZ28, 6RZ30, 6RZ31, 6RZ32, 6RZ33, 6RZ34, 6RZ35, 6RZ36, 6RZ84, 6TD39, 6TD40, 6TD87, 6TH34, 6TH35, 6TH74, 6TH87, 6TJ64, 6TJ65, 6TJ66, 6TJ67, 6TJ68, 6TJ69, 6TJ70, 6TJ71, 6TK05, 6TK06, 6TK07, 6TK08, 6TL29, 6TL31, 6TL32, 6TL40, 6TL43, 6TL50, 6TL52, 6TL53, 6TL54, 6TL55, 6TL57, 6TL58, 6TL59, 6TL60, 6TL62, 6TL66, 6TL67, 6TL68, 6TL77, 6TL79, 6TL85, 6TL86, 6TL87, 6TL90, 6TM01, 6TM04, 6TM09, 6TM10, 6TM13, 6TM14, 6TM17, 6TM18, 6TM20, 6TM21, 6TM22, 6TM26, 6TM38, 6TM41, 6TM42, 6TM43, 6TM44, 6TM45, 6TM48, 6TM49, 6TM51, 6TM55, 6TM56, 6TM57, 6TM59, 6TM60, 6TM61, 6TM62, 6TM63, 6TM64, 6TM67, 6TM71, 6TM72, 6TM73, 6TM74, 6TM75, 6TM77, 6TM79, 6TM80, 6TM81, 6TM85, 6TM87, 6TM88, 6TM93, 6TM94, 6TM95, 6TM98, 6TN03, 6TN04, 6TN05, 6TN06, 6TN07, 6TN09, 6TN10, 6TN11, 6TN12, 6TN13, 6TN18, 6TN20, 6TN24, 6TN25, 6TN26, 6TN27, 6TN28, 6TN30, 6TN31, 6TN32, 6TN33, 6TN36, 6TN37, 6TN39, 6TN43, 6TN44, 6TN47, 6TN48, 6TN49, 6TN50, 6TN51, 6TN53, 6TN54, 6TN57, 6TN62, 6TN65, 6TN66, 6TN69, 6TP87, 6TP88, 6TP89, 6TP90, 6TP91, 6TP92, 6TP93, 6TP94, 6TP95, 6TP96, 6TP97, 6TP98, 6TP99, 6TR32, 6TT38, 6TT40, 6TT41, 6TT44, 6TT68, 6TT71, 6TT72, 6TT74, 6TT76, 6TT77, 6TT78, 6TT79, 6TT80, 6TT81, 6TT82, 6TT83, 6TT84, 6TT85, 6TT93, 6TT94, 6TT95, 6TV26, 6TV27, 6TV29, 6TV30, 6TV41, 6TV97, 6TW15, 6TW16, 6TW17, 6TW18, 6TW19, 6TW20, 6TW21, 6TW22, 6TW23, 6TW24, 6TW25, 6TW26, 6TW27, 6TW28, 6TW29, 6TW30, 6TW31, 6TW32, 6TW33, 6TW34, 6TW35, 6TW36, 6TW37, 6TW38, 6TW50, 6TW51, 6TW70, 6TW83, 6TW84, 6TW87, 6TW88, 6TW91, 6TW92, 6TX15, 6TX16, 6TX17, 6TX18, 6TX19, 6TX24, 6TX37, 6TX38, 6TX47, 6TX49, 6TZ86, 6TZ89, 6TZ91, 6TZ92, 6UC09, 6UC18, 6UC19, 6UC20, 6UC72 |
| Manufacturer Model Number(s): |
SDS Table of Contents
Click the desired link below to jump directly to that section in the SDS.
3M
MATERIAL SAFETY DATA SHEET
3M(TM) SCOTCH-BRITE(TM) SURFACE CONDITIONING PRODUCTS, AVFN (SHEETS,
ROLLS, DISCS (INCLUDES ROLOC(TM) TN, TP, TR, TS, TSM), SCRIM BELTS, BELTS)
05/24/10
MATERIAL SAFETY DATA SHEET
COPYRIGHT, 2010, 3M COMPANY. ALL RIGHTS RESERVED. COPYING AND/OR
DOWNLOADING OF THIS INFORMATION FOR THE PURPOSE OF PROPERLY UTILIZING 3M
PRODUCTS IS ALLOWED PROVIDED THAT:
(1) THE INFORMATION IS COPIED IN FULL WITH NO CHANGES UNLESS PRIOR WRITTEN
AGREEMENT IS OBTAINED FROM 3M, AND
(2) NEITHER THE COPY NOR THE ORIGINAL IS RESOLD OR OTHERWISE DISTRIBUTED
WITH THE INTENTION OF EARNING A PROFIT THEREON.
| SECTION 1: PRODUCT AND COMPANY IDENTIFICATION |  |
PRODUCT NAME:
3M(TM) SCOTCH-BRITE(TM) SURFACE CONDITIONING PRODUCTS, AVFN (SHEETS,
ROLLS, DISCS (INCLUDES ROLOC(TM) TN, TP, TR, TS, TSM), SCRIM BELTS, BELTS)
MANUFACTURER: 3M
DIVISION: ABRASIVES SYSTEMS DIVISION
ADDRESS:
3M CENTER
ST. PAUL, MN 55144-1000
EMERGENCY PHONE: 1-800-364-3577 OR (651) 737-6501 (24 HOURS)
ISSUE DATE: 05/24/10
SUPERCEDES DATE: 03/23/10
DOCUMENT GROUP: 05-5844-5
PRODUCT USE:
INTENDED USE: ABRASIVE PRODUCT
| SECTION 2: INGREDIENTS | |
INGREDIENT C.A.S. NO. % BY WT
ALUMINUM OXIDE MINERAL 1344-28-1 25 - 40
ADDITIVE 13463-67-7 <3
NYLON FIBER BACKING MIXTURE 10 - 20
NYLON SCRIM NONE 5 - 10
CURED RESIN MIXTURE 25 - 40
ROLOC(TM) ATTACHMENT NONE 0 - 5
HOOKIT(TM) ATTACHMENT MIXTURE 0 - 5
| SECTION 3: HAZARDS IDENTIFICATION | |
3.1 EMERGENCY OVERVIEW:
SPECIFIC PHYSICAL FORM: NON-WOVEN MATERIAL
ODOR, COLOR, GRADE: SOLID ABRASIVE PRODUCT
GENERAL PHYSICAL FORM: SOLID
IMMEDIATE HEALTH, PHYSICAL, AND ENVIRONMENTAL HAZARDS:
THIS DOCUMENT COVERS ONLY THE 3M PRODUCT. FOR COMPLETE ASSESSMENT, WHEN
DETERMINING THE DEGREE OF HAZARD, THE MATERIAL BEING ABRADED MUST ALSO BE
CONSIDERED.
3.2 POTENTIAL HEALTH EFFECTS:
EYE CONTACT:
MECHANICAL EYE IRRITATION:
SIGNS/SYMPTOMS MAY INCLUDE PAIN, REDNESS, TEARING AND CORNEAL ABRASION.
DUST CREATED BY CUTTING, GRINDING, SANDING, OR MACHINING MAY CAUSE EYE
IRRITATION. SIGNS/SYMPTOMS MAY INCLUDE REDNESS, SWELLING, PAIN, TEARING,
AND BLURRED OR HAZY VISION.
SKIN CONTACT:
MECHANICAL SKIN IRRITATION:
SIGNS/SYMPTOMS MAY INCLUDE ABRASION, REDNESS, PAIN, AND ITCHING.
INHALATION:
DUST FROM CUTTING, GRINDING, SANDING OR MACHINING MAY CAUSE IRRITATION OF
THE RESPIRATORY SYSTEM. SIGNS/SYMPTOMS MAY INCLUDE COUGH, SNEEZING, NASAL
DISCHARGE, HEADACHE, HOARSENESS, AND NOSE AND THROAT PAIN.
PROLONGED OR REPEATED EXPOSURE MAY CAUSE:
PNEUMOCONIOSIS:
SIGN/SYMPTOMS MAY INCLUDE PERSISTENT COUGH, BREATHLESSNESS, CHEST PAIN,
INCREASED AMOUNTS OF SPUTUM, AND CHANGES IN LUNG FUNCTION TESTS.
INGESTION: NO HEALTH EFFECTS ARE EXPECTED.
| SECTION 4: FIRST AID MEASURES | |
4.1 FIRST AID PROCEDURES:
THE FOLLOWING FIRST AID RECOMMENDATIONS ARE BASED ON AN ASSUMPTION THAT
APPROPRIATE PERSONAL AND INDUSTRIAL HYGIENE PRACTICES ARE FOLLOWED.
EYE CONTACT:
FLUSH EYES WITH LARGE AMOUNTS OF WATER. IF SIGNS/SYMPTOMS PERSIST, GET
MEDICAL ATTENTION.
SKIN CONTACT:
WASH AFFECTED AREA WITH SOAP AND WATER. IF SIGNS/SYMPTOMS DEVELOP, GET
MEDICAL ATTENTION.
INHALATION:
REMOVE PERSON TO FRESH AIR. IF SIGNS/SYMPTOMS DEVELOP, GET MEDICAL
ATTENTION.
IF SWALLOWED: NO NEED FOR FIRST AID IS ANTICIPATED.
| SECTION 5: FIRE FIGHTING MEASURES | |
5.1 FLAMMABLE PROPERTIES:
AUTOIGNITION TEMPERATURE: NOT APPLICABLE
FLASH POINT: NOT APPLICABLE
FLAMMABLE LIMITS - LEL: NOT APPLICABLE
FLAMMABLE LIMITS - UEL: NOT APPLICABLE
5.2 EXTINGUISHING MEDIA:
ORDINARY COMBUSTIBLE MATERIAL. USE FIRE EXTINGUISHERS WITH CLASS A
EXTINGUISHING AGENTS (E.G., WATER, FOAM).
5.3 PROTECTION OF FIRE FIGHTERS
SPECIAL FIRE FIGHTING PROCEDURES:
WEAR FULL PROTECTIVE EQUIPMENT (BUNKER GEAR) AND A SELF-CONTAINED
BREATHING APPARATUS (SCBA).
UNUSUAL FIRE AND EXPLOSION HAZARDS:
NOT APPLICABLE. NONE INHERENT IN THIS PRODUCT.
NOTE:
SEE STABILITY AND REACTIVITY (SECTION 10) FOR HAZARDOUS COMBUSTION AND
THERMAL DECOMPOSITION INFORMATION.
| SECTION 6: ACCIDENTAL RELEASE MEASURES | |
ACCIDENTAL RELEASE MEASURES:
NOT APPLICABLE. PLACE IN A CONTAINER APPROVED FOR TRANSPORTATION BY
APPROPRIATE AUTHORITIES, BUT DO NOT SEAL THE CONTAINER FOR 48 HOURS TO
AVOID PRESSURE BUILD-UP.
IN THE EVENT OF A RELEASE OF THIS MATERIAL, THE USER SHOULD DETERMINE IF
THE RELEASE QUALIFIES AS REPORTABLE ACCORDING TO LOCAL, STATE, AND FEDERAL
REGULATIONS.
| SECTION 7: HANDLING AND STORAGE | |
7.1 HANDLING:
FOR INDUSTRIAL OR PROFESSIONAL USE ONLY. AVOID EYE CONTACT WITH DUST OR
AIRBORNE PARTICLES. AVOID BREATHING OF DUST CREATED BY SANDING, GRINDING
OR MACHINING. DAMAGED PRODUCT CAN BREAK APART DURING USE AND CAUSE SERIOUS
INJURY TO FACE OR EYES. CHECK PRODUCT FOR DAMAGE SUCH AS CRACKS OR NICKS
PRIOR TO USE. REPLACE IF DAMAGED. ALWAYS WEAR EYE AND FACE PROTECTION WHEN
WORKING AT SANDING OR GRINDING OPERATIONS OR WHEN NEAR SUCH OPERATIONS.
SPARKS AND PARTICLES FLYING FROM THE PRODUCT DURING SANDING OR GRINDING
CAN CAUSE INJURY AND FIRE.
7.2 STORAGE: STORE IN A COOL, DRY PLACE.
| SECTION 8: EXPOSURE CONTROLS/PERSONAL PROTECTION | |
8.1 ENGINEERING CONTROLS:
PROVIDE APPROPRIATE LOCAL EXHAUST FOR CUTTING, GRINDING, SANDING OR
MACHINING. PROVIDE VENTILATION ADEQUATE TO CONTROL DUST CONCENTRATIONS
BELOW RECOMMENDED EXPOSURE LIMITS AND/OR CONTROL DUST. USE GENERAL
DILUTION VENTILATION AND/OR LOCAL EXHAUST VENTILATION TO CONTROL AIRBORNE
EXPOSURES TO BELOW OCCUPATIONAL EXPOSURE LIMITS AND/OR CONTROL DUST, FUME,
OR AIRBORNE PARTICLES. IF VENTILATION IS NOT ADEQUATE, USE RESPIRATORY
PROTECTION EQUIPMENT.
8.2 PERSONAL PROTECTIVE EQUIPMENT (PPE):
8.2.1 EYE/FACE PROTECTION:
AVOID EYE CONTACT. TO MINIMIZE THE RISK OF INJURY TO FACE AND EYES, ALWAYS
WEAR EYE AND FACE PROTECTION WHEN WORKING AT SANDING OR GRINDING
OPERATIONS OR WHEN NEAR SUCH OPERATIONS.
THE FOLLOWING EYE PROTECTION(S) ARE RECOMMENDED:
SAFETY GLASSES WITH SIDE SHIELDS
8.2.2 SKIN PROTECTION:
AVOID SKIN CONTACT. SELECT AND USE GLOVES AND/OR PROTECTIVE CLOTHING TO
PREVENT SKIN CONTACT BASED ON THE RESULTS OF AN EXPOSURE ASSESSMENT.
CONSULT WITH YOUR GLOVE AND/OR PROTECTIVE CLOTHING MANUFACTURER FOR
SELECTION OF APPROPRIATE COMPATIBLE MATERIALS. WEAR APPROPRIATE GLOVES TO
MINIMIZE RISK OF INJURY TO SKIN FROM CONTACT WITH DUST OR PHYSICAL
ABRASION FROM GRINDING OR SANDING.
8.2.3 RESPIRATORY PROTECTION:
AVOID BREATHING OF DUST CREATED BY SANDING, GRINDING OR MACHINING. ASSESS
EXPOSURE CONCENTRATIONS OF ALL MATERIALS INVOLVED IN THE WORK PROCESS.
CONSIDER MATERIAL BEING ABRADED WHEN DETERMINING THE APPROPRIATE
RESPIRATORY PROTECTION. SELECT AND USE APPROPRIATE RESPIRATORS TO PREVENT
INHALATION OVEREXPOSURE.
SELECT ONE OF THE FOLLOWING NIOSH APPROVED RESPIRATORS BASED ON AIRBORNE
CONCENTRATION OF CONTAMINANTS AND IN ACCORDANCE WITH OSHA REGULATIONS:
HALF FACEPIECE OR FULLFACE AIR-PURIFYING RESPIRATOR WITH N95 PARTICULATE
FILTERS. CONSULT THE CURRENT 3M RESPIRATORY SELECTION GUIDE FOR ADDITIONAL
INFORMATION OR CALL 1-800-243-4630 FOR 3M TECHNICAL ASSISTANCE.
8.2.4 PREVENTION OF SWALLOWING:
NOT AN EXPECTED ROUTE OF EXPOSURE. WASH HANDS AFTER HANDLING AND BEFORE
EATING.
8.3 EXPOSURE GUIDELINES:
INGREDIENT AUTHORITY TYPE LIMIT ADDITIONAL
INFORMATION
ALUMINUM CMRG TWA 1 FIBER/CC
OXIDE MINERAL
ALUMINUM OSHA TWA, RESPIRABLE 5 MG/M3
OXIDE MINERAL FRACTION
ALUMINUM OSHA TWA, AS TOTAL DUST 15 MG/M3
OXIDE MINERAL
PETROLEUM OSHA TWA 2000 MG/M3
DISTILLATES
ADDITIVE ACGIH TWA 10 MG/M3
ADDITIVE CMRG TWA, AS RESPIRABLE 5 MG/M3
DUST
ADDITIVE OSHA TWA, AS TOTAL DUST 15 MG/M3
SOURCE OF EXPOSURE LIMIT DATA:
ACGIH: AMERICAN CONFERENCE OF GOVERNMENTAL INDUSTRIAL HYGIENISTS
CMRG: CHEMICAL MANUFACTURER RECOMMENDED GUIDELINE
OSHA: OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION
AIHA:
AMERICAN INDUSTRIAL HYGIENE ASSOCIATION WORKPLACE ENVIRONMENTAL EXPOSURE
LEVEL (WEEL)
| SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES | |
SPECIFIC PHYSICAL FORM: NON-WOVEN MATERIAL
ODOR, COLOR, GRADE: SOLID ABRASIVE PRODUCT
GENERAL PHYSICAL FORM: SOLID
AUTOIGNITION TEMPERATURE: NOT APPLICABLE
FLASH POINT: NOT APPLICABLE
FLAMMABLE LIMITS - LEL: NOT APPLICABLE
FLAMMABLE LIMITS - UEL: NOT APPLICABLE
BOILING POINT: NOT APPLICABLE
VAPOR DENSITY: NOT APPLICABLE
VAPOR PRESSURE: NOT APPLICABLE
SPECIFIC GRAVITY: NOT APPLICABLE
pH: NOT APPLICABLE
MELTING POINT: NO DATA AVAILABLE
SOLUBILITY IN WATER: NOT APPLICABLE
KOW - OCT/WATER PARTITION COEF: NOT APPLICABLE
| SECTION 10: STABILITY AND REACTIVITY | |
STABILITY: STABLE.
MATERIALS AND CONDITIONS TO AVOID:
10.1 CONDITIONS TO AVOID: NONE KNOWN
10.2 MATERIALS TO AVOID: NONE KNOWN
HAZARDOUS POLYMERIZATION: HAZARDOUS POLYMERIZATION WILL NOT OCCUR.
HAZARDOUS DECOMPOSITION OR BY-PRODUCTS:
SUBSTANCE CONDITION
CARBON MONOXIDE DURING COMBUSTION
CARBON DIOXIDE DURING COMBUSTION
HAZARDOUS DECOMPOSITION:
UNDER RECOMMENDED USAGE CONDITIONS, HAZARDOUS DECOMPOSITION PRODUCTS ARE
NOT EXPECTED. HAZARDOUS DECOMPOSITION PRODUCTS MAY OCCUR AS A RESULT OF
OXIDATION, HEATING, OR REACTION WITH ANOTHER MATERIAL.
| SECTION 11: TOXICOLOGICAL INFORMATION | |
PLEASE CONTACT THE ADDRESS LISTED IN SECTION 1 OF THIS MSDS FOR
TOXICOLOGICAL INFORMATION ON THIS MATERIAL AND/OR ITS COMPONENTS.
| SECTION 12: ECOLOGICAL INFORMATION | |
ECOTOXICOLOGICAL INFORMATION: NOT DETERMINED.
CHEMICAL FATE INFORMATION: NOT DETERMINED.
| SECTION 13: DISPOSAL CONSIDERATIONS | |
WASTE DISPOSAL METHOD:
THE SUBSTRATE THAT WAS ABRADED MUST BE CONSIDERED AS A FACTOR IN THE
DISPOSAL METHOD FOR THIS PRODUCT. DISPOSE OF WASTE PRODUCT IN A SANITARY
LANDFILL. AS A DISPOSAL ALTERNATIVE, INCINERATE IN AN INDUSTRIAL OR
COMMERCIAL FACILITY IN THE PRESENCE OF A COMBUSTIBLE MATERIAL. COMBUSTION
PRODUCTS WILL INCLUDE HF. FACILITY MUST BE CAPABLE OF HANDLING HALOGENATED
MATERIALS.
EPA HAZARDOUS WASTE NUMBER (RCRA): NOT REGULATED
SINCE REGULATIONS VARY, CONSULT APPLICABLE REGULATIONS OR AUTHORITIES
BEFORE DISPOSAL.
| SECTION 14: TRANSPORT INFORMATION | |
NOT REGULATED PER U.S. DOT, IATA OR IMO.
THESE TRANSPORTATION CLASSIFICATIONS ARE PROVIDED AS A CUSTOMER SERVICE.
AS THE SHIPPER YOU REMAIN RESPONSIBLE FOR COMPLYING WITH ALL APPLICABLE
LAWS AND REGULATIONS, INCLUDING PROPER TRANSPORTATION CLASSIFICATION AND
PACKAGING. 3M'S TRANSPORTATION CLASSIFICATIONS ARE BASED ON PRODUCT
FORMULATION, PACKAGING, 3M POLICIES AND 3M'S UNDERSTANDING OF APPLICABLE
CURRENT REGULATIONS. 3M DOES NOT GUARANTEE THE ACCURACY OF THIS
CLASSIFICATION INFORMATION. THIS INFORMATION APPLIES ONLY TO
TRANSPORTATION CLASSIFICATION AND NOT THE PACKAGING, LABELING, OR MARKING
REQUIREMENTS. THE ORIGINAL 3M PACKAGE IS CERTIFIED FOR U.S. GROUND
SHIPMENT ONLY. IF YOU ARE SHIPPING BY AIR OR OCEAN, THE PACKAGE MAY NOT
MEET APPLICABLE REGULATORY REQUIREMENTS.
| SECTION 15: REGULATORY INFORMATION | |
US FEDERAL REGULATIONS: CONTACT 3M FOR MORE INFORMATION.
311/312 HAZARD CATEGORIES:
FIRE HAZARD - NO
PRESSURE HAZARD - NO
REACTIVITY HAZARD - NO
IMMEDIATE HAZARD - YES
DELAYED HAZARD - YES
STATE REGULATIONS: CONTACT 3M FOR MORE INFORMATION.
CHEMICAL INVENTORIES:
THIS PRODUCT IS AN ARTICLE AS DEFINED BY TSCA REGULATIONS, AND IS EXEMPT
FROM TSCA INVENTORY LISTING REQUIREMENTS.
CONTACT 3M FOR MORE INFORMATION.
INTERNATIONAL REGULATIONS: CONTACT 3M FOR MORE INFORMATION.
WHMIS: HAZARDOUS
THIS MSDS HAS BEEN PREPARED TO MEET THE U.S. OSHA HAZARD COMMUNICATION
STANDARD, 29 CFR 1910.1200.
| SECTION 16: OTHER INFORMATION | |
NFPA HAZARD CLASSIFICATION:
HEALTH 1
FLAMMABILITY 1
REACTIVITY 0
SPECIAL HAZARDS NONE
NATIONAL FIRE PROTECTION ASSOCIATION (NFPA) HAZARD RATINGS ARE DESIGNED
FOR USE BY EMERGENCY RESPONSE PERSONNEL TO ADDRESS THE HAZARDS THAT ARE
PRESENTED BY SHORT-TERM, ACUTE EXPOSURE TO A MATERIAL UNDER CONDITIONS OF
FIRE, SPILL, OR SIMILAR EMERGENCIES. HAZARD RATINGS ARE PRIMARILY BASED ON
THE INHERENT PHYSICAL AND TOXIC PROPERTIES OF THE MATERIAL BUT ALSO
INCLUDE THE TOXIC PROPERTIES OF COMBUSTION OR DECOMPOSITION PRODUCTS THAT
ARE KNOWN TO BE GENERATED IN SIGNIFICANT QUANTITIES.
REVISION CHANGES:
SECTION 7: HANDLING INFORMATION WAS MODIFIED.
SECTION 8: ENGINEERING CONTROLS INFORMATION WAS MODIFIED.
SECTION 8: EYE/FACE PROTECTION INFORMATION WAS MODIFIED.
SECTION 8:
RESPIRATORY PROTECTION - RECOMMENDED RESPIRATORS INFORMATION WAS MODIFIED.
SECTION 6: ENVIRONMENTAL PROCEDURES INFORMATION WAS MODIFIED.
SECTION 10: MATERIALS TO AVOID PHYSICAL PROPERTY WAS MODIFIED.
SECTION 10: CONDITIONS TO AVOID PHYSICAL PROPERTY WAS MODIFIED.
SECTION 8: HAND PROTECTION INFORMATION WAS MODIFIED.
DISCLAIMER:
THE INFORMATION IN THIS MATERIAL SAFETY DATA SHEET (MSDS) IS BELIEVED TO
BE CORRECT AS OF THE DATE ISSUED. 3M MAKES NO WARRANTIES, EXPRESSED OR
IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR COURSE OF
PERFORMANCE OR USAGE OF TRADE. USER IS RESPONSIBLE FOR DETERMINING WHETHER
THE 3M PRODUCT IS FIT FOR A PARTICULAR PURPOSE AND SUITABLE FOR USER'S
METHOD OF USE OR APPLICATION. GIVEN THE VARIETY OF FACTORS THAT CAN AFFECT
THE USE AND APPLICATION OF A 3M PRODUCT, SOME OF WHICH ARE UNIQUELY WITHIN
THE USER'S KNOWLEDGE AND CONTROL, IT IS ESSENTIAL THAT THE USER EVALUATE
THE 3M PRODUCT TO DETERMINE WHETHER IT IS FIT FOR A PARTICULAR PURPOSE AND
SUITABLE FOR USER'S METHOD OF USE OR APPLICATION.
3M PROVIDES INFORMATION IN ELECTRONIC FORM AS A SERVICE TO ITS CUSTOMERS.
DUE TO THE REMOTE POSSIBILITY THAT ELECTRONIC TRANSFER MAY HAVE RESULTED
IN ERRORS, OMISSIONS OR ALTERATIONS IN THIS INFORMATION, 3M MAKES NO
REPRESENTATIONS AS TO ITS COMPLETENESS OR ACCURACY. IN ADDITION,
INFORMATION OBTAINED FROM A DATABASE MAY NOT BE AS CURRENT AS THE
INFORMATION IN THE MSDS AVAILABLE DIRECTLY FROM 3M.
3M MSDSS ARE AVAILABLE AT WWW.3M.COM