| Common Name: | 2182, 2182F |
| Manufacturer: | SELECTRODE INDUSTRIES |
| SDS Revision Date: | 1/1/2011 |
| SDS Format: | No Format Specified |
| Item Number(s): | 6YU77 |
| Manufacturer Model Number(s): |
SDS Table of Contents
Click the desired link below to jump directly to that section in the SDS.
MATERIAL SAFETY DATA SHEET
MSDS#: 492
LATEST REVISION: JANUARY 2011
SELECTRODE INDUSTRIES, INC.
| 1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION |  |
1.1 PRODUCT NAME: 2182, 2182F
1.2 MANUFACTURER:
SELECTRODE INDUSTRIES, INC.
230 BROADWAY
HUNTINGTON STATION, NY 11746
U.S.A.
PHONE: 631-547-5470
FAX: 631-547-5475
E-MAIL: INFO@SELECTRODE.COM
1.3 EMERGENCY TELEPHONE NUMBER: 631-547-5470
| 2. COMPOSITION / INFORMATION ON INGREDIENTS | |
HAZARDOUS INGREDIENTS:
IMPORTANT:
THIS SECTION COVERS THE MATERIALS OF WHICH THE PRODUCTS ARE MANUFACTURED.
THE FUMES AND GASES PRODUCED DURING NORMAL USE OF THIS PRODUCT ARE COVERED
IN SECTION 3. THE TERM "HAZARDOUS" IN "HAZARDOUS MATERIAL" SHOULD BE
INTERPRETED AS A TERM REQUIRED AND DEFINED IN OSHA HAZARD COMMUNICATION
STANDARD 29 CFR 1910-1200 AND IT DOES NOT NECESSARILY IMPLY THE EXISTENCE
OF HAZARD. THE CHEMICALS OR COMPOUNDS REPORTABLE BY SECTION 313 OF SARA ARE
MARKED BY THE SYMBOL #.
INGREDIENTS CAS# % RANGE
#COPPER 7440-50-8 75-85
PHOSPHOROUS 7723-14-0 1-11
SILVER 7440-22-4 10-20
INGREDIENTS OSHA PEL ACGIH-TLV CARCINOGENICITY R-PHASE
(MG/M3) (MG/M3)
#COPPER 1.0 1.0 NO
PHOSPHOROUS .1 .1 NO
SILVER .01 .01 NO
| 3. HAZARD IDENTIFICATION | |
REASONABLE EXPECTED DECOMPOSITION PRODUCTS FROM NORMAL USE OF THESE
PRODUCTS INCLUDE A COMPLEX OF THE OXIDES OF THE MATERIALS LISTED IN SECTION
2, AS WELL AS CARBON MONOXIDE, CARBON DIOXIDE, OZONE, AND NITROGEN OXIDES
(REFER TO "CHARACTERIZATION OF ARC WELDING FUME" AVAILABLE FROM THE
AMERICAN WELDING SOCIETY). THE TLV FOR MANGANESE (0.02 MG/M3) WILL BE
REACHED BEFORE THE GENERAL LIMIT FOR WELDING FUMES OF 5 MG/M3 IS REACHED.
MONITOR FUMES FOR MAGANESE LEVELS. THE ONLY WAY TO DETERMINE THE TRUE
IDENTITY OF THE DECOMPOSITION PRODUCTS IS BY SAMPLING AND ANALYSIS. THE
COMPOSITION AND QUANTITY OF THE FUMES AND GASES TO WHICH A WORKER MAY BE
OVEREXPOSED CAN BE DETERMINED FROM A SAMPLE OBTAINED FROM INSIDE THE
WELDER'S HELMET, IF WORN, OR IN THE WORKER'S BREATHING ZONE. SEE ANSI/AWS
F1.1 "METHOD FOR SAMPLING AIRBORNE PARTICLES GENERATED BY WELDING AND
ALLIED PROCESSES." AVAILABLE FROM THE AMERICAN WELDING SOCIETY.
| 4. FIRST AID MEASURES | |
EYES: FLUSH WITH WATER FOR 15 MINUTES. CALL A PHYSICIAN.
SKIN: WASH THOROUGHLY WITH WATER. IF RASH DEVELOPS CALL A PHYSICIAN.
INHALATION: REMOVE TO FRESH AIR OR ADMINISTER OXYGEN. CALL PHYSICIAN.
INGESTION: GET MEDICAL ATTENTION IMMEDIATELY.
| 5. FIRE AND EXPLOSION HAZARD DATA | |
MEANS OF EXTINGUISHING: NO DANGER REQUIRING SPECIAL MEASURES.
SPECIAL PROTECTIVE EQUIPMENT WHEN FIGHTING FIRE: NONE.
| 6. ACCIDENTAL RELEASE MEASURES | |
INDIVIDUAL PRECAUTIONS: AVOID DUST FORMATION/BREATHING DUST.
ENVIRONMENT PROTECTION PRECAUTIONS: NO PARTICULAR INDICATIONS.
CLEANING MEASURES: REMOVE SPOILED PRODUCT MECHANICALLY.
| 7. HANDLING AND STORAGE | |
7.1 HANDLING: WITH STANDARD TRANSPORTATION EQUIPMENT.
7.2 STORAGE: STORE IN A DRY PLACE IN CLOSED PACKAGES.
| 8. EXPOSURE CONTROLS/ PERSONAL PROTECTION | |
TECHNICAL MEASURES:
USE ADEQUATE LOCAL EXHAUST FOR WELDING FUMES.
AVOID GRINDING DUST INHALATION.
EXPOSURE LIMITS: SEE SECTION 2.
PERSONAL PROTECTION:
RESPIRATORY PROTECTION: USE AN AIR PURIFYING DUST RESPIRATOR.
HANDS PROTECTION: WEAR APPROPRIATE GLOVES TO PREVENT SKIN CONTACT.
EYES PROTECTION: WELDER'S HELMETS.
SKIN PROTECTION: WEAR APPROPRIATE OVERALLS TO PREVENT SKIN OR BODY CONTACT.
| 9. PHYSICAL AND CHEMICAL PROPERTIES | |
PHYSICAL STATE: SOLID.
ODOR: NONE
PH: NON APPLICABLE
MELTING POINT: 1337 DEG. F (725 DEG. C)
RELATIVE DENSITY: 7.6 G/CM3
SOLUBILITY: INSOLUBLE IN WATER
| 10. STABILITY AND REACTIVITY | |
STABILITY:
CONDITIONS TO AVOID: NOT APPLICABLE.
MATERIALS TO AVOID: REACTS WITH ACIDS.
HAZARDOUS DECOMPOSITION PRODUCTS: UNKNOWN.
| 11. TOXICOLOGICAL INFORMATION | |
EFFECTS OF ACUTE EXPOSURE:
TOXICITY TO ANIMALS: UNKNOWN
LOCAL EFFECTS: NOT APPLICABLE.
INHALATION:
NOT APPLICABLE FOR THE PRODUCT. FOR WELDING FUMES SEE SECTION 3.
INGESTION: NOT APPLICABLE.
CONTACT WITH SKIN: NO ADVERSE EFFECTS EXPECTED.
CARCINOGENICITY:
EFFECTS OF CHRONIC (LONG-TERM) OVEREXPOSURE TO AIR CONTAMINANTS MAY LEAD TO
THEIR ACCUMULATION IN THE LUNGS, A CONDITION WHICH MAY BE SEEN AS DENSE
AREAS ON CHEST X-RAYS. THE SEVERITY OF THE CHANGE IS PROPORTIONAL TO THE
LENGTH OF EXPOSURE. THE CHANGES SEEN ARE NOT NECESSARILY ASSOCIATED WITH
SYMPTOMS OR SIGNS OF REDUCED LUNG FUNCTION OR DISEASE. IN ADDITION, THE
CHANGES ON X-RAYS MAY BE CAUSED BY NON-WORK FACTORS SUCH AS SMOKING, ETC.
NICKEL AND CHROMIUM (IN SOME PRODUCTS) ARE CONSIDERED CARCINOGENIC. LONG
TERM OVEREXPOSURE TO NICKEL FUMES MAY ALSO CAUSE PULMONARY FIBROSIS AND
EDEMA. OVEREXPOSURE TO MANGANESE COMPOUNDS MAY AFFECT THE CENTRAL NERVOUS
SYSTEM, SYMPTOMS OF WHICH ARE LANGUOR, SLEEPINESS, MUSCULAR WEAKNESS,
EMOTIONAL DISTURBANCES, AND SPASTIC GAIT. THE EFFECT OF MANGANESE ON THE
NERVOUS SYSTEM IS IRREVERSIBLE.
| 12. ECOLOGICAL INFORMATION | |
ABOUT PRODUCT: DATA ARE UNKNOWN
ABOUT INGREDIENTS: DATA ARE UNKNOWN.
| 13. DISPOSAL CONSIDERATIONS | |
PRODUCT:
FOR PRODUCT ELIMINATION, CONSULT RECYCLING COMPANIES OR APPROPRIATE LOCAL
AUTHORITY.
PACKAGE:
MAY BE DISPOSED IN APPROVED LANDFILLS PROVIDED LOCAL REGULATIONS ARE
OBSERVED.
| 14. TRANSPORT INFORMATION | |
INTERNATIONAL REGULATIONS:
LAND SHIPMENT: NO HAZARD
RAIL/ROUTE (RID/ADR):
SEA SHIPMENT: NO HAZARD
SHIPMENT BY AIR: NO HAZARD
| 15. REGULATORY INFORMATION | |
LABEL CEE: NOT NECESSARY
DANGER SYMBOLS AND INDICATIONS:
R-PHRASES:
S-PHRASES:
| 16. OTHER INFORMATION | |
THE INFORMATION IN THIS DOCUMENT IS BELIEVED TO BE CORRECT AS OF THE DATE
ISSUED. HOWEVER, NO WARRANTY IS EXPRESSED TO BE IMPLIED REGARDING THE
ACCURACY OR COMPLETENESS OF THIS INFORMATION. THIS INFORMATION AND PRODUCT
ARE FURNISHED ON THE CONDITION THAT THE PERSON RECEIVING THEM SHALL MAKE
HIS OWN DETERMINATIONS AS TO THE SUITABILITY OF THE PRODUCT FOR HIS
PARTICULAR PURPOSE AND ON THE CONDITION THAT HE ASSUMES THE RISK OF HIS USE
THEREOF.
THIS MATERIAL SAFETY DATA SHEET COMPLIES WITH THE EC DIRECTIVES
91/155/EEC AND 93/112/EEC
INCLUDING MODIFICATIONS 2001/58/EC.
COMPLIES WITH OSHA COMMUNICATION STANDARD 29 CFR 1910.1200 AND SUPERFUND
AMENDMENTS AND REAUTHORIZATION ACT (SARA) OF 1986 PUBLIC LAW 99-499