| Common Name: | FLOOR PATCH, 13120 |
| Manufacturer: | ITW DEVCON |
| SDS Revision Date: | 6/30/2012 |
| SDS Format: | No Format Specified |
| Item Number(s): | 38X003 |
| Manufacturer Model Number(s): |
SDS Table of Contents
Click the desired link below to jump directly to that section in the SDS.
DEVCON(R*)
MSDS NAME: DEVCON(R*) FLOOR PATCH(TM)
MANUFACTURER NAME: ITW DEVCON
STOCK NO.: 13120
KIT MSDS REVISION DATE: 06/30/2012
COMPONENTS:
FLOOR PATCH RESIN
FLOOR PATCH HARDENER
FLOOR PATCH SAND
ITW DEVCON PRODUCT CODE: 13120
| SECTION 1 - PRODUCT AND COMPANY IDENTIFICATION |  |
PRODUCT NAME: FLOOR PATCH RESIN
MANUFACTURER NAME: ITW DEVCON
ADDRESS:
30 ENDICOTT STREET
DANVERS, MA 01923
GENERAL PHONE NUMBER: (978) 777-1100
EMERGENCY PHONE NUMBER: (800) 424-9300
CHEMTREC:
FOR EMERGENCIES IN THE US, CALL CHEMTREC: 800-424-9300
MSDS REVISION DATE: 06/30/2012
HMIS:
HEALTH HAZARD 2*
FIRE HAZARD 1
REACTIVITY 1
PERSONAL PROTECTION X
* CHRONIC HEALTH EFFECTS
| SECTION 2 - COMPOSITION/INFORMATION ON INGREDIENTS | |
CHEMICAL NAME CAS# INGREDIENT PERCENT
BISPHENOL A DIGLYCIDYL ETHER RESIN 25068-38-6 60 - 100 BY WEIGHT
TITANIUM DIOXIDE 13463-67-7 1 - 5 BY WEIGHT
ALKYL GLYCIDYL ETHER 68609-97-2 10 - 30 BY WEIGHT
| SECTION 3 - HAZARDS IDENTIFICATION | |
EMERGENCY OVERVIEW:
WARNING!
POTENTIAL SENSITIZER. IRRITANT.
ROUTE OF EXPOSURE: EYES. SKIN. INHALATION. INGESTION.
POTENTIAL HEALTH EFFECTS:
EYE:
CAN CAUSE MODERATE IRRITATION, BURNING SENSATION, TEARING, REDNESS, AND
SWELLING. OVEREXPOSURE MAY CAUSE LACRIMATION, CONJUNCTIVITIS, CORNEAL
DAMAGE AND PERMANENT INJURY.
SKIN:
CAN CAUSE SKIN IRRITATION; ITCHING, REDNESS, RASHES, HIVES, BURNING, AND
SWELLING. ALLERGIC REACTIONS ARE POSSIBLE.
MAY CAUSE SKIN SENSITIZATION, AN ALLERGIC REACTION, WHICH BECOMES EVIDENT
ON REEXPOSURE TO THIS MATERIAL.
INHALATION:
RESPIRATORY TRACT IRRITANT. HIGH CONCENTRATION MAY CAUSE DIZZINESS,
HEADACHE, AND ANESTHETIC EFFECTS. MAY CAUSE RESPIRATORY SENSITIZATION WITH
ASTHMA-LIKE SYMPTOMS IN SUSCEPTIBLE INDIVIDUALS.
INGESTION:
CAUSES IRRITATION, A BURNING SENSATION OF THE MOUTH, THROAT AND
GASTROINTESTINAL TRACT AND ABDOMINAL PAIN.
CHRONIC HEALTH EFFECTS:
PROLONGED SKIN CONTACT MAY LEAD TO BURNING ASSOCIATED WITH SEVERE
REDDENING, SWELLING, AND POSSIBLE TISSUE DESTRUCTION.
SIGNS/SYMPTOMS:
OVEREXPOSURE CAN CAUSE HEADACHES, DIZZINESS, NAUSEA, AND VOMITING.
TARGET ORGANS: EYES. SKIN. RESPIRATORY SYSTEM. DIGESTIVE SYSTEM.
AGGRAVATION OF PRE-EXISTING CONDITIONS:
INDIVIDUALS WITH PRE-EXISTING SKIN DISORDERS, ASTHMA, ALLERGIES OR KNOWN
SENSITIZATION MAY BE MORE SUSCEPTIBLE TO THE EFFECTS OF THIS PRODUCT.
| SECTION 4 - FIRST AID MEASURES | |
EYE CONTACT:
IMMEDIATELY FLUSH EYES WITH PLENTY OF WATER FOR AT LEAST 15 TO 20 MINUTES.
ENSURE ADEQUATE FLUSHING OF THE EYES BY SEPARATING THE EYELIDS WITH
FINGERS. GET IMMEDIATE MEDICAL ATTENTION.
SKIN CONTACT:
IMMEDIATELY WASH SKIN WITH PLENTY OF SOAP AND WATER FOR 15 TO 20 MINUTES,
WHILE REMOVING CONTAMINATED CLOTHING AND SHOES. GET MEDICAL ATTENTION IF
IRRITATION DEVELOPS OR PERSISTS.
INHALATION:
IF INHALED, REMOVE TO FRESH AIR. IF NOT BREATHING, GIVE ARTIFICIAL
RESPIRATION OR GIVE OXYGEN BY TRAINED PERSONNEL. SEEK IMMEDIATE MEDICAL
ATTENTION.
INGESTION:
IF SWALLOWED, DO NOT INDUCE VOMITING. CALL A PHYSICIAN OR POISON CONTROL
CENTER IMMEDIATELY. NEVER GIVE ANYTHING BY MOUTH TO AN UNCONSCIOUS PERSON.
| SECTION 5 - FIRE FIGHTING MEASURES | |
FLASH POINT: >300 DEG. F (148.8 DEG. C)
FLASH POINT METHOD: ESTIMATED.
AUTO IGNITION TEMPERATURE: NOT DETERMINED.
LOWER FLAMMABLE/EXPLOSIVE LIMIT: NOT DETERMINED.
UPPER FLAMMABLE/EXPLOSIVE LIMIT: NOT DETERMINED.
FIRE FIGHTING INSTRUCTIONS:
EVACUATE AREA OF UNPROTECTED PERSONNEL. USE COLD WATER SPRAY TO COOL FIRE
EXPOSED CONTAINERS TO MINIMIZE RISK OF RUPTURE. DO NOT ENTER CONFINED FIRE
SPACE WITHOUT FULL PROTECTIVE GEAR. IF POSSIBLE, CONTAIN FIRE RUN-OFF
WATER.
EXTINGUISHING MEDIA:
USE CARBON DIOXIDE (CO2) OR DRY CHEMICAL WHEN FIGHTING FIRES INVOLVING THIS
MATERIAL.
UNSUITABLE MEDIA: WATER OR FOAM MAY CAUSE FROTHING.
PROTECTIVE EQUIPMENT:
AS IN ANY FIRE, WEAR SELF-CONTAINED BREATHING APPARATUS (SCBA), MSHA/NIOSH
(APPROVED OR EQUIVALENT) AND FULL PROTECTIVE GEAR.
UNUSUAL FIRE HAZARDS:
SEALED CONTAINERS AT ELEVATED TEMPERATURES MAY RUPTURE EXPLOSIVELY AND
SPREAD FIRE DUE TO POLYMERIZATION. HEATING ABOVE 300 DEG. F IN THE PRESENCE
OF AIR MAY CAUSE SLOW OXIDATIVE DECOMPOSITION AND ABOVE 500 DEG. F MAY
CAUSE POLYMERIZATION.
| SECTION 6 - ACCIDENTAL RELEASE MEASURES | |
SPILL CLEANUP MEASURES:
ABSORB SPILL WITH INERT MATERIAL (E.G., DRY SAND OR EARTH), THEN PLACE IN A
CHEMICAL WASTE CONTAINER. PROVIDE VENTILATION. CLEAN UP SPILLS IMMEDIATELY
OBSERVING PRECAUTIONS IN THE PROTECTIVE EQUIPMENT SECTION. AFTER REMOVAL,
FLUSH SPILL AREA WITH SOAP AND WATER TO REMOVE TRACE RESIDUE.
AVOID PERSONAL CONTACT AND BREATHING VAPORS OR MISTS. VENTILATE AREA. USE
PROPER PERSONAL PROTECTIVE EQUIPMENT AS LISTED IN SECTION 8.
PERSONNEL PRECAUTIONS:
EVACUATE AREA AND KEEP UNNECESSARY AND UNPROTECTED PERSONNEL FROM ENTERING
THE SPILL AREA.
ENVIRONMENTAL PRECAUTIONS:
AVOID RUNOFF INTO STORM SEWERS, DITCHES, AND WATERWAYS.
OTHER PRECAUTIONS: PUMP OR SHOVEL TO STORAGE/SALVAGE VESSELS.
| SECTION 7 - HANDLING AND STORAGE | |
HANDLING:
USE WITH ADEQUATE VENTILATION. AVOID BREATHING VAPOR, AEROSOL OR MIST.
STORAGE:
STORE IN A COOL, DRY, WELL VENTILATED AREA AWAY FROM SOURCES OF HEAT AND
INCOMPATIBLE MATERIALS. KEEP CONTAINER TIGHTLY CLOSED WHEN NOT IN USE.
SPECIAL HANDLING PROCEDURES:
PROVIDE APPROPRIATE VENTILATION/RESPIRATORY PROTECTION AGAINST
DECOMPOSITION PRODUCTS (SEE SECTION 10) DURING WELDING/FLAME CUTTING
OPERATIONS AND TO PROTECT AGAINST DUST DURING SANDING/GRINDING OF CURED
PRODUCT.
HYGIENE PRACTICES: WASH THOROUGHLY AFTER HANDLING.
| SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION - EXPOSURE | |
GUIDELINES
ENGINEERING CONTROLS:
USE APPROPRIATE ENGINEERING CONTROL SUCH AS PROCESS ENCLOSURES, LOCAL
EXHAUST VENTILATION, OR OTHER ENGINEERING CONTROLS TO CONTROL AIRBORNE
LEVELS BELOW RECOMMENDED EXPOSURE LIMITS. GOOD GENERAL VENTILATION SHOULD
BE SUFFICIENT TO CONTROL AIRBORNE LEVELS. WHERE SUCH SYSTEMS ARE NOT
EFFECTIVE WEAR SUITABLE PERSONAL PROTECTIVE EQUIPMENT, WHICH PERFORMS
SATISFACTORILY AND MEETS OSHA OR OTHER RECOGNIZED STANDARDS. CONSULT WITH
LOCAL PROCEDURES FOR SELECTION, TRAINING, INSPECTION AND MAINTENANCE OF THE
PERSONAL PROTECTIVE EQUIPMENT.
EYE/FACE PROTECTION:
WEAR APPROPRIATE PROTECTIVE GLASSES OR SPLASH GOGGLES AS DESCRIBED BY 29
CFR 1910.133, OSHA EYE AND FACE PROTECTION REGULATION, OR THE EUROPEAN
STANDARD EN 166.
SKIN PROTECTION DESCRIPTION:
WEAR APPROPRIATE PROTECTIVE GLOVES AND OTHER PROTECTIVE APPAREL TO PREVENT
SKIN CONTACT. CONSULT MANUFACTURER'S DATA FOR PERMEABILITY DATA.
RESPIRATORY PROTECTION:
A NIOSH APPROVED AIR-PURIFYING RESPIRATOR WITH AN ORGANIC VAPOR CARTRIDGE
OR CANISTER MAY BE PERMISSIBLE UNDER CERTAIN CIRCUMSTANCES WHERE AIRBORNE
CONCENTRATIONS ARE EXPECTED TO EXCEED EXPOSURE LIMITS. PROTECTION PROVIDED
BY AIR PURIFYING RESPIRATORS IS LIMITED. USE A POSITIVE PRESSURE AIR
SUPPLIED RESPIRATOR IF THERE IS ANY POTENTIAL FOR AN UNCONTROLLED RELEASE,
EXPOSURE LEVELS ARE NOT KNOWN, OR ANY OTHER CIRCUMSTANCES WHERE AIR
PURIFYING RESPIRATORS MAY NOT PROVIDE ADEQUATE PROTECTION.
OTHER PROTECTIVE:
FACILITIES STORING OR UTILIZING THIS MATERIAL SHOULD BE EQUIPPED WITH AN
EYEWASH AND A DELUGE SHOWER SAFETY STATION.
EXPOSURE GUIDELINES:
TITANIUM DIOXIDE:
GUIDELINE ACGIH: 10 MG/M3
TLV-TWA: 10 MG/M3
NOTES: ONLY ESTABLISHED PEL AND TLV VALUES FOR THE INGREDIENTS ARE LISTED.
| SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES | |
PHYSICAL STATE APPEARANCE: VISCOUS. LIQUID.
ODOR: SLIGHT ODOR
BOILING POINT: >500 DEG. F (260 DEG. C)
MELTING POINT: NOT DETERMINED.
SPECIFIC GRAVITY: 1.1 - 1.3
SOLUBILITY: NEGLIGIBLE
VAPOR DENSITY: >1 (AIR = 1)
VAPOR PRESSURE: 0.03 MMHg @ 171 DEG. F
PERCENT VOLATILE: 0
EVAPORATION RATE: <1 (BUTYL ACETATE = 1)
pH: NEUTRAL.
MOLECULAR FORMULA: MIXTURE
MOLECULAR WEIGHT: MIXTURE
FLASH POINT: >300 DEG. F (148.8 DEG. C)
FLASH POINT METHOD: ESTIMATED.
AUTO IGNITION TEMPERATURE: NOT DETERMINED.
VOC CONTENT: 0 G/L
PERCENT SOLIDS BY WEIGHT: 100
| SECTION 10 - STABILITY AND REACTIVITY | |
CHEMICAL STABILITY: STABLE UNDER NORMAL TEMPERATURES AND PRESSURES.
HAZARDOUS POLYMERIZATION: NOT REPORTED.
CONDITIONS TO AVOID:
EXTREME HEAT, SPARKS, AND OPEN FLAME. INCOMPATIBLE MATERIALS, OXIDIZERS AND
OXIDIZING CONDITIONS. HEATING RESIN ABOVE 300 F IN THE PRESENCE OF AIR MAY
CAUSE SLOW OXIDATIVE DECOMPOSITION.
INCOMPATIBLE MATERIALS:
STRONG LEWIS OR MINERAL ACIDS, STRONG OXIDIZING AGENTS, STRONG MINERAL AND
ORGANIC BASES (ESPECIALLY PRIMARY AND SECONDARY ALIPHATIC AMINES).
| SECTION 11 - TOXICOLOGICAL INFORMATION | |
BISPHENOL A DIGLYCIDYL ETHER RESIN:
RTECS NUMBER: SL6480000
SKIN:
ADMINISTRATION ONTO THE SKIN - RAT LD:
>2 GM/KG [NUTRITIONAL AND GROSS METABOLIC - OTHER CHANGES]
TITANIUM DIOXIDE:
RTECS NUMBER: XR2275000
SKIN:
ADMINISTRATION ONTO THE SKIN - HUMAN: 300 (MICRO)G/3D (INTERMITTENT)
CARCINOGENICITY:
IARC:
GROUP 2B: POSSIBLY CARCINOGENIC TO HUMANS.
ALKYL GLYCIDYL ETHER:
RTECS NUMBER: RR0562500
SKIN:
ADMINISTRATION ONTO THE SKIN - RABBIT: 500 (MICRO)L/24H
INGESTION:
ORAL - RAT LD50:
17100 MG/KG (DETAILS OF TOXIC EFFECTS NOT REPORTED OTHER THAN LETHAL DOSE
VALUE)
| SECTION 12 - ECOLOGICAL INFORMATION | |
ECOTOXICITY: NO ECOTOXICITY DATA WAS FOUND FOR THE PRODUCT.
ENVIRONMENTAL FATE: NO ENVIRONMENTAL INFORMATION FOUND FOR THIS PRODUCT.
| SECTION 13 - DISPOSAL CONSIDERATIONS | |
WASTE DISPOSAL:
CONSULT WITH THE US EPA GUIDELINES LISTED IN 40 CFR PART 261.3 FOR THE
CLASSIFICATIONS OF HAZARDOUS WASTE PRIOR TO DISPOSAL. FURTHERMORE, CONSULT
WITH YOUR STATE AND LOCAL WASTE REQUIREMENTS OR GUIDELINES, IF APPLICABLE,
TO ENSURE COMPLIANCE. ARRANGE DISPOSAL IN ACCORDANCE TO THE EPA AND/OR
STATE AND LOCAL GUIDELINES.
RCRA NUMBER: NONE.
| SECTION 14 - TRANSPORT INFORMATION | |
DOT SHIPPING NAME: NON REGULATED.
DOT UN NUMBER: N/A
DOT HAZARD CLASS: NOT APPLICABLE.
DOT PACKING GROUP: NOT APPLICABLE.
| SECTION 15 - REGULATORY INFORMATION | |
BISPHENOL A DIGLYCIDYL ETHER RESIN:
TSCA INVENTORY STATUS: LISTED
CANADA DSL: LISTED
TITANIUM DIOXIDE:
TSCA INVENTORY STATUS: LISTED
MASSACHUSETTS: LISTED
PENNSYLVANIA: LISTED
CANADA DSL: LISTED
ALKYL GLYCIDYL ETHER:
TSCA INVENTORY STATUS: LISTED
CANADA DSL: LISTED
CANADIAN REGULATIONS.:
WHMIS HAZARD CLASS(ES): D2B
ALL COMPONENTS OF THIS PRODUCT ARE ON THE CANADIAN DOMESTIC SUBSTANCES
LIST.
| SECTION 16 - ADDITIONAL INFORMATION | |
HMIS FIRE HAZARD 1
HMIS HEALTH HAZARD 2*
HMIS REACTIVITY 1
HMIS PERSONAL PROTECTION X
MSDS REVISION DATE: 06/30/2012
MSDS AUTHOR: ACTIO CORPORATION
DISCLAIMER:
THIS HEALTH AND SAFETY INFORMATION IS CORRECT TO THE BEST OF OUR KNOWLEDGE
AND BELIEF AT THE DATE OF ITS PUBLICATION BUT WE CANNOT ACCEPT LIABILITY
FOR ANY LOSS, INJURY OR DAMAGE WHICH MAY RESULT FROM ITS USE. THE
INFORMATION GIVEN IN THE DATA SHEET IS DESIGNED ONLY AS A GUIDANCE FOR SAFE
HANDLING, STORAGE AND THE USE OF THE SUBSTANCE. IT IS NOT A SPECIFICATION
NOR DOES IT GUARANTEE ANY SPECIFIC PROPERTIES. ALL CHEMICALS SHOULD BE
HANDLED ONLY BY COMPETENT PERSONNEL, WITHIN A CONTROLLED ENVIRONMENT.
COPYRIGHT(C) 1996-2011 ACTIO SOFTWARE CORPORATION. ALL RIGHTS RESERVED.
| SECTION 1 - PRODUCT AND COMPANY IDENTIFICATION | |
PRODUCT NAME: FLOOR PATCH HARDENER
MANUFACTURER NAME: ITW DEVCON
ADDRESS:
30 ENDICOTT STREET
DANVERS, MA 01923
GENERAL PHONE NUMBER: (978) 777-1100
EMERGENCY PHONE NUMBER: (800) 424-9300
CHEMTREC:
FOR EMERGENCIES IN THE US, CALL CHEMTREC: 800-424-9300
MSDS REVISION DATE: 06/30/2012
HMIS:
HEALTH HAZARD 3*
FIRE HAZARD 1
REACTIVITY 1
PERSONAL PROTECTION X
* CHRONIC HEALTH EFFECTS
| SECTION 2 - COMPOSITION/INFORMATION ON INGREDIENTS | |
CHEMICAL NAME CAS# INGREDIENT PERCENT
BISPHENOL A 80-05-7 60 - 100 BY WEIGHT
DIETHYLENETRIAMINE 111-40-0 30 - 60 BY WEIGHT
| SECTION 3 - HAZARDS IDENTIFICATION | |
EMERGENCY OVERVIEW:
DANGER!
CORROSIVE. TOXIC. POTENTIAL SENSITIZER. IRRITANT.
ROUTE OF EXPOSURE: EYES. SKIN. INHALATION. INGESTION.
POTENTIAL HEALTH EFFECTS:
EYE:
CORROSIVE. WILL CAUSE EYE BURNS, PERMANENT TISSUE DAMAGE, AND BLINDNESS.
SKIN:
CORROSIVE CAUSES SEVERE SKIN BURNS. MAY CAUSE PERMANENT SKIN DAMAGE.
ALLERGIC REACTIONS ARE POSSIBLE.
MAY CAUSE SKIN SENSITIZATION, AN ALLERGIC REACTION, WHICH BECOMES EVIDENT
ON REEXPOSURE TO THIS MATERIAL.
INHALATION:
MAY CAUSE SEVERE RESPIRATORY SYSTEM IRRITATION. MAY CAUSE RESPIRATORY
SENSITIZATION WITH ASTHMA-LIKE SYMPTOMS IN SUSCEPTIBLE INDIVIDUALS.
INGESTION: HARMFUL IF SWALLOWED. CORROSIVE TO THE GASTROINTESTINAL TRACT.
CHRONIC HEALTH EFFECTS:
PROLONGED SKIN CONTACT CAUSES BURNS.
REPEATED OR PROLONGED INHALATION MAY CAUSE TOXIC EFFECTS.
SIGNS/SYMPTOMS:
DEPENDING ON SOLUTION CONCENTRATION, MATERIAL MAY BE CORROSIVE TO SKIN,
MUCOUS MEMBRANES AND EYES. VAPORS MAY CAUSE RESPIRATORY IRRITATION.
TARGET ORGANS: EYES. SKIN. RESPIRATORY SYSTEM. DIGESTIVE SYSTEM.
AGGRAVATION OF PRE-EXISTING CONDITIONS:
INDIVIDUALS WITH PRE-EXISTING SKIN DISORDERS, ASTHMA, ALLERGIES OR KNOWN
SENSITIZATION MAY BE MORE SUSCEPTIBLE TO THE EFFECTS OF THIS PRODUCT.
| SECTION 4 - FIRST AID MEASURES | |
EYE CONTACT:
IMMEDIATELY FLUSH EYES WITH PLENTY OF WATER FOR AT LEAST 15 TO 20 MINUTES.
ENSURE ADEQUATE FLUSHING OF THE EYES BY SEPARATING THE EYELIDS WITH
FINGERS. GET IMMEDIATE MEDICAL ATTENTION.
SKIN CONTACT:
IMMEDIATELY WASH SKIN WITH PLENTY OF SOAP AND WATER FOR 15 TO 20 MINUTES,
WHILE REMOVING CONTAMINATED CLOTHING AND SHOES. GET MEDICAL ATTENTION IF
IRRITATION DEVELOPS OR PERSISTS.
INHALATION:
IF INHALED, REMOVE TO FRESH AIR. IF NOT BREATHING, GIVE ARTIFICIAL
RESPIRATION OR GIVE OXYGEN BY TRAINED PERSONNEL. SEEK IMMEDIATE MEDICAL
ATTENTION.
INGESTION:
IF SWALLOWED, DO NOT INDUCE VOMITING. CALL A PHYSICIAN OR POISON CONTROL
CENTER IMMEDIATELY. NEVER GIVE ANYTHING BY MOUTH TO AN UNCONSCIOUS PERSON.
OTHER FIRST AID:
DUE TO POSSIBLE ASPIRATION INTO THE LUNGS, DO NOT INDUCE VOMITING IF
INGESTED. PROVIDE A GLASS OF WATER TO DILUTE THE MATERIAL IN THE STOMACH.
IF VOMITING OCCURS NATURALLY, HAVE THE PERSON LEAN FORWARD TO REDUCE THE
RISK OF ASPIRATION.
| SECTION 5 - FIRE FIGHTING MEASURES | |
FLASH POINT: 217 DEG. F (102.7 DEG. C)
FLASH POINT METHOD: PENSKY-MARTENS CLOSED CUP
AUTO IGNITION TEMPERATURE: NOT DETERMINED.
LOWER FLAMMABLE/EXPLOSIVE LIMIT: NOT DETERMINED.
UPPER FLAMMABLE/EXPLOSIVE LIMIT: NOT DETERMINED.
FIRE FIGHTING INSTRUCTIONS:
EVACUATE AREA OF UNPROTECTED PERSONNEL. USE COLD WATER SPRAY TO COOL FIRE
EXPOSED CONTAINERS TO MINIMIZE RISK OF RUPTURE. DO NOT ENTER CONFINED FIRE
SPACE WITHOUT FULL PROTECTIVE GEAR. IF POSSIBLE, CONTAIN FIRE RUN-OFF
WATER.
EXTINGUISHING MEDIA:
USE CARBON DIOXIDE (CO2) OR DRY CHEMICAL WHEN FIGHTING FIRES INVOLVING THIS
MATERIAL.
UNSUITABLE MEDIA: WATER OR FOAM MAY CAUSE FROTHING.
PROTECTIVE EQUIPMENT:
AS IN ANY FIRE, WEAR SELF-CONTAINED BREATHING APPARATUS (SCBA), MSHA/NIOSH
(APPROVED OR EQUIVALENT) AND FULL PROTECTIVE GEAR.
| SECTION 6 - ACCIDENTAL RELEASE MEASURES | |
SPILL CLEANUP MEASURES:
ABSORB SPILL WITH INERT MATERIAL (E.G., DRY SAND OR EARTH), THEN PLACE IN A
CHEMICAL WASTE CONTAINER. PROVIDE VENTILATION. CLEAN UP SPILLS IMMEDIATELY
OBSERVING PRECAUTIONS IN THE PROTECTIVE EQUIPMENT SECTION. AFTER REMOVAL,
FLUSH SPILL AREA WITH SOAP AND WATER TO REMOVE TRACE RESIDUE.
CORROSIVE. AVOID PERSONAL CONTACT AND BREATHING VAPORS OR MISTS. VENTILATE
AREA. USE PROPER PERSONAL PROTECTIVE EQUIPMENT AS LISTED IN SECTION 8.
PERSONNEL PRECAUTIONS:
EVACUATE AREA AND KEEP UNNECESSARY AND UNPROTECTED PERSONNEL FROM ENTERING
THE SPILL AREA.
ENVIRONMENTAL PRECAUTIONS:
AVOID RUNOFF INTO STORM SEWERS, DITCHES, AND WATERWAYS.
OTHER PRECAUTIONS: PUMP OR SHOVEL TO STORAGE/SALVAGE VESSELS.
| SECTION 7 - HANDLING AND STORAGE | |
HANDLING:
USE WITH ADEQUATE VENTILATION. AVOID BREATHING VAPOR, AEROSOL OR MIST.
AVOID CONTACT WITH EYES AND SKIN. DO NOT REUSE CONTAINERS WITHOUT PROPER
CLEANING OR RECONDITIONING.
STORAGE:
STORE IN A COOL, DRY, WELL VENTILATED AREA AWAY FROM SOURCES OF HEAT AND
INCOMPATIBLE MATERIALS. KEEP CONTAINER TIGHTLY CLOSED WHEN NOT IN USE. DO
NOT STORE IN REACTIVE METAL CONTAINERS. KEEP AWAY FROM ACIDS, OXIDIZERS.
SPECIAL HANDLING PROCEDURES:
PROVIDE APPROPRIATE VENTILATION/RESPIRATORY PROTECTION AGAINST
DECOMPOSITION PRODUCTS (SEE SECTION 10) DURING WELDING/FLAME CUTTING
OPERATIONS AND TO PROTECT AGAINST DUST DURING SANDING/GRINDING OF CURED
PRODUCT.
HYGIENE PRACTICES: WASH THOROUGHLY AFTER HANDLING.
| SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION - EXPOSURE | |
GUIDELINES
ENGINEERING CONTROLS:
USE APPROPRIATE ENGINEERING CONTROL SUCH AS PROCESS ENCLOSURES, LOCAL
EXHAUST VENTILATION, OR OTHER ENGINEERING CONTROLS TO CONTROL AIRBORNE
LEVELS BELOW RECOMMENDED EXPOSURE LIMITS. GOOD GENERAL VENTILATION SHOULD
BE SUFFICIENT TO CONTROL AIRBORNE LEVELS. WHERE SUCH SYSTEMS ARE NOT
EFFECTIVE WEAR SUITABLE PERSONAL PROTECTIVE EQUIPMENT, WHICH PERFORMS
SATISFACTORILY AND MEETS OSHA OR OTHER RECOGNIZED STANDARDS. CONSULT WITH
LOCAL PROCEDURES FOR SELECTION, TRAINING, INSPECTION AND MAINTENANCE OF THE
PERSONAL PROTECTIVE EQUIPMENT.
EYE/FACE PROTECTION:
WEAR APPROPRIATE PROTECTIVE GLASSES OR SPLASH GOGGLES AS DESCRIBED BY 29
CFR 1910.133, OSHA EYE AND FACE PROTECTION REGULATION, OR THE EUROPEAN
STANDARD EN 166.
SKIN PROTECTION DESCRIPTION:
CHEMICAL-RESISTANT GLOVES AND CHEMICAL GOGGLES, FACE-SHIELD AND SYNTHETIC
APRON OR COVERALLS SHOULD BE USED TO PREVENT CONTACT WITH EYES, SKIN OR
CLOTHING.
RESPIRATORY PROTECTION:
A NIOSH APPROVED AIR-PURIFYING RESPIRATOR WITH AN ORGANIC VAPOR CARTRIDGE
OR CANISTER MAY BE PERMISSIBLE UNDER CERTAIN CIRCUMSTANCES WHERE AIRBORNE
CONCENTRATIONS ARE EXPECTED TO EXCEED EXPOSURE LIMITS. PROTECTION PROVIDED
BY AIR PURIFYING RESPIRATORS IS LIMITED. USE A POSITIVE PRESSURE AIR
SUPPLIED RESPIRATOR IF THERE IS ANY POTENTIAL FOR AN UNCONTROLLED RELEASE,
EXPOSURE LEVELS ARE NOT KNOWN, OR ANY OTHER CIRCUMSTANCES WHERE AIR
PURIFYING RESPIRATORS MAY NOT PROVIDE ADEQUATE PROTECTION.
OTHER PROTECTIVE:
FACILITIES STORING OR UTILIZING THIS MATERIAL SHOULD BE EQUIPPED WITH AN
EYEWASH AND A DELUGE SHOWER SAFETY STATION.
EXPOSURE GUIDELINES:
DIETHYLENETRIAMINE:
GUIDELINE ACGIH: 1 PPM
SKIN: YES
TLV-TWA: 1 PPM
NOTES: ONLY ESTABLISHED PEL AND TLV VALUES FOR THE INGREDIENTS ARE LISTED.
| SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES | |
PHYSICAL STATE APPEARANCE: LIQUID.
COLOR: AMBER.
ODOR: AMMONIA LIKE.
BOILING POINT: 401 DEG. F (205 DEG. C)
MELTING POINT: <-0.4 DEG. F (-18 DEG. C)
SPECIFIC GRAVITY: 1.03
SOLUBILITY: 1.4% W/W @ 68 F
VAPOR DENSITY: 3.5 (DETA) (AIR = 1)
VAPOR PRESSURE: <0.1 MMHg @77 DEG. F
PERCENT VOLATILE: 0
EVAPORATION RATE: NOT DETERMINED.
pH: ALKALINE
MOLECULAR FORMULA: MIXTURE
MOLECULAR WEIGHT: MIXTURE
FLASH POINT: 217 DEG. F (102.7 DEG. C)
FLASH POINT METHOD: PENSKY-MARTENS CLOSED CUP
AUTO IGNITION TEMPERATURE: NOT DETERMINED.
VOC CONTENT: 0 G/L
PERCENT SOLIDS BY WEIGHT: 100
| SECTION 10 - STABILITY AND REACTIVITY | |
CHEMICAL STABILITY: STABLE UNDER NORMAL TEMPERATURES AND PRESSURES.
HAZARDOUS POLYMERIZATION: NOT REPORTED.
CONDITIONS TO AVOID:
EXTREME HEAT, SPARKS, AND OPEN FLAME. INCOMPATIBLE MATERIALS, OXIDIZERS AND
OXIDIZING CONDITIONS. PRODUCT MAY SLOWLY CORRODE COPPER, ALUMINUM, ZINC AND
GALVANIZED SURFACES.
INCOMPATIBLE MATERIALS:
OXIDIZERS, ACIDS, AND CHLORINATED ORGANIC COMPOUNDS. REACTIVE METALS (E.G.
SODIUM, CALCIUM, ZINC). SODIUM/CALCIUM HYPOCHLORITE. NITROUS ACID/OXIDE,
NITRITES. PEROXIDES. MATERIALS REACTIVE WITH HYDROXYL COMPOUNDS.
| SECTION 11 - TOXICOLOGICAL INFORMATION | |
BISPHENOL A:
RTECS NUMBER: SL6300000
EYE:
EYE - RABBIT STANDARD DRAIZE TEST.: 250 (MICRO)G/24H
SKIN:
ADMINISTRATION ONTO THE SKIN - RABBIT:
3 ML/KG [DETAILS OF TOXIC EFFECTS NOT REPORTED OTHER THAN LETHAL DOSE
VALUE]
ADMINISTRATION ONTO THE SKIN - RABBIT: 250 MG
ADMINISTRATION ONTO THE SKIN - RABBIT: 500 MG/24H
ADMINISTRATION ONTO THE SKIN - RABBIT: 10%/2D (INTERMITTENT)
INGESTION:
ORAL - RAT LD50:
3250 MG/KG [DETAILS OF TOXIC EFFECTS NOT REPORTED OTHER THAN LETHAL DOSE
VALUE]
ORAL - MOUSE LD50:
2400 MG/KG [AUTONOMIC NERVOUS SYSTEM - OTHER (DIRECT) PARASYMPATHOMIMETIC
BEHAVIORAL - CONVULSIONS OR EFFECT ON SEIZURE THRESHOLD BEHAVIORAL -
ATAXIA]
ORAL - RAT LD50:
1200 MG/KG [REPRODUCTIVE - FERTILITY - FEMALE FERTILITY INDEX (E.G., NUMBER
FEMALES PREGNANT PER NUMBER SPERM POSITIVE FEMALES; NUMBER FEMALES PREGNANT
PER NUMBER FEMALES MATED)]
ORAL - MOUSE LD50:
2500 MG/KG [DETAILS OF TOXIC EFFECTS NOT REPORTED OTHER THAN LETHAL DOSE
VALUE]
ORAL - RAT LD50:
4240 MG/KG [KIDNEY/URETER/BLADDER - OTHER CHANGES IN URINE COMPOSITION]
ORAL - MOUSE LD50:
2500 MG/KG [BRAIN AND COVERINGS - CHANGES IN CIRCULATION (HEMORRHAGE,
THROMBOSIS, ETC.) LIVER - FATTY LIVER DEGENERATION LIVER - OTHER CHANGES]
ORAL - MOUSE LD50:
2500 MG/KG [LUNGS, THORAX, OR RESPIRATION - DYSPNEA LUNGS, THORAX, OR
RESPIRATION - OTHER CHANGES]
DIETHYLENETRIAMINE:
RTECS NUMBER: IE1225000
SKIN:
ADMINISTRATION ONTO THE SKIN - RABBIT:
1090 MG/KG [DETAILS OF TOXIC EFFECTS NOT REPORTED OTHER THAN LETHAL DOSE
VALUE]
ADMINISTRATION ONTO THE SKIN - GUINEA PIG:
170 (MICRO)L/KG [DETAILS OF TOXIC EFFECTS NOT REPORTED OTHER THAN LETHAL
DOSE VALUE]
ADMINISTRATION ONTO THE SKIN - RABBIT: 500 MG
ADMINISTRATION ONTO THE SKIN - RABBIT: 500 MG
INGESTION:
ORAL - RAT LD50:
1080 MG/KG [BEHAVIORAL - CONVULSIONS OR EFFECT ON SEIZURE THRESHOLD]
| SECTION 12 - ECOLOGICAL INFORMATION | |
ECOTOXICITY: NO ECOTOXICITY DATA WAS FOUND FOR THE PRODUCT.
ENVIRONMENTAL FATE: NO ENVIRONMENTAL INFORMATION FOUND FOR THIS PRODUCT.
| SECTION 13 - DISPOSAL CONSIDERATIONS | |
WASTE DISPOSAL:
CONSULT WITH THE US EPA GUIDELINES LISTED IN 40 CFR PART 261.3 FOR THE
CLASSIFICATIONS OF HAZARDOUS WASTE PRIOR TO DISPOSAL. FURTHERMORE, CONSULT
WITH YOUR STATE AND LOCAL WASTE REQUIREMENTS OR GUIDELINES, IF APPLICABLE,
TO ENSURE COMPLIANCE. ARRANGE DISPOSAL IN ACCORDANCE TO THE EPA AND/OR
STATE AND LOCAL GUIDELINES.
RCRA NUMBER: NONE.
| SECTION 14 - TRANSPORT INFORMATION | |
DOT SHIPPING NAME: REFER TO BILL OF LADING
DOT UN NUMBER: REFER TO BILL OF LADING
| SECTION 15 - REGULATORY INFORMATION | |
BISPHENOL A:
TSCA INVENTORY STATUS: LISTED
SARA:
EPCRA - 40 CFR PART 372 - (SARA TITLE III) SECTION 313 LISTED CHEMICAL.
NEW JERSEY:
LISTED: NJ HAZARDOUS LIST
SUBSTANCE NUMBER: 2388
MASSACHUSETTS: LISTED
PENNSYLVANIA: LISTED
CANADA DSL: LISTED
DIETHYLENETRIAMINE:
TSCA INVENTORY STATUS: LISTED
MASSACHUSETTS: LISTED
PENNSYLVANIA: LISTED
CANADA DSL: LISTED
CANADIAN REGULATIONS.:
WHMIS HAZARD CLASS(ES): D2B; E
ALL COMPONENTS OF THIS PRODUCT ARE ON THE CANADIAN DOMESTIC SUBSTANCES
LIST.
| SECTION 16 - ADDITIONAL INFORMATION | |
HMIS FIRE HAZARD 1
HMIS HEALTH HAZARD 3*
HMIS REACTIVITY 1
HMIS PERSONAL PROTECTION X
MSDS REVISION DATE: 06/30/2012
MSDS AUTHOR: ACTIO CORPORATION
DISCLAIMER:
THIS HEALTH AND SAFETY INFORMATION IS CORRECT TO THE BEST OF OUR KNOWLEDGE
AND BELIEF AT THE DATE OF ITS PUBLICATION BUT WE CANNOT ACCEPT LIABILITY
FOR ANY LOSS, INJURY OR DAMAGE WHICH MAY RESULT FROM ITS USE. THE
INFORMATION GIVER IN THE DATA SHEET IS DESIGNED ONLY AS A GUIDANCE FOR SAFE
HANDLING, STORAGE AND THE USE OF THE SUBSTANCE. IT IS NOT A SPECIFICATION
NOR DOES IT GUARANTEE ANY SPECIFIC PROPERTIES. ALL CHEMICALS SHOULD BE
HANDLED ONLY BY COMPETENT PERSONNEL, WITHIN A CONTROLLED ENVIRONMENT.
COPYRIGHT(C) 1996-2011 ACTIO SOFTWARE CORPORATION. ALL RIGHTS RESERVED.
| SECTION 1 - PRODUCT AND COMPANY IDENTIFICATION | |
PRODUCT NAME: FLOOR PATCH SAND
MANUFACTURER NAME: ITW DEVCON
ADDRESS:
30 ENDICOTT STREET
DANVERS, MA 01923
GENERAL PHONE NUMBER: (978) 777-1100
EMERGENCY PHONE NUMBER: (800) 424-9300
CHEMTREC:
FOR EMERGENCIES IN THE US, CALL CHEMTREC: 800-424-9300
MSDS REVISION DATE: 06/30/2012
HMIS:
HEALTH HAZARD 1*
FIRE HAZARD 0
REACTIVITY 0
PERSONAL PROTECTION X
* CHRONIC HEALTH EFFECTS
| SECTION 2 - COMPOSITION/INFORMATION ON INGREDIENTS | |
CHEMICAL NAME CAS# INGREDIENT PERCENT
CRYSTALLINE SILICA 14808-60-7 60 - 100 BY WEIGHT
| SECTION 3 - HAZARDS IDENTIFICATION | |
EMERGENCY OVERVIEW:
CAUTION!
IRRITANT.
ROUTE OF EXPOSURE: EYES. SKIN. INHALATION. INGESTION.
POTENTIAL HEALTH EFFECTS:
EYE: MAY CAUSE IRRITATION.
SKIN: MAY CAUSE IRRITATION.
INHALATION:
PROLONGED OR EXCESSIVE INHALATION MAY CAUSE RESPIRATORY TRACT IRRITATION.
INGESTION: MAY BE HARMFUL IF SWALLOWED. MAY CAUSE VOMITING.
CHRONIC HEALTH EFFECTS:
PROLONGED OR REPEATED CONTACT MAY CAUSE SKIN IRRITATION.
SIGNS/SYMPTOMS: OVEREXPOSURE MAY CAUSE HEADACHES AND DIZZINESS.
TARGET ORGANS: EYES. SKIN. RESPIRATORY SYSTEM. DIGESTIVE SYSTEM.
AGGRAVATION OF PRE-EXISTING CONDITIONS: NONE GENERALLY RECOGNIZED.
| SECTION 4 - FIRST AID MEASURES | |
EYE CONTACT:
IMMEDIATELY FLUSH EYES WITH PLENTY OF WATER FOR AT LEAST 15 TO 20 MINUTES.
ENSURE ADEQUATE FLUSHING OF THE EYES BY SEPARATING THE EYELIDS WITH
FINGERS. GET IMMEDIATE MEDICAL ATTENTION.
SKIN CONTACT:
IMMEDIATELY WASH SKIN WITH PLENTY OF SOAP AND WATER FOR 15 TO 20 MINUTES,
WHILE REMOVING CONTAMINATED CLOTHING AND SHOES.
GET MEDICAL ATTENTION IF IRRITATION DEVELOPS OR PERSISTS.
INHALATION:
IF INHALED, REMOVE TO FRESH AIR. IF NOT BREATHING, GIVE ARTIFICIAL
RESPIRATION OR GIVE OXYGEN BY TRAINED PERSONNEL. SEEK IMMEDIATE MEDICAL
ATTENTION.
INGESTION:
IF SWALLOWED, DO NOT INDUCE VOMITING. CALL A PHYSICIAN OR POISON CONTROL
CENTER IMMEDIATELY. NEVER GIVE ANYTHING BY MOUTH TO AN UNCONSCIOUS PERSON.
| SECTION 5 - FIRE FIGHTING MEASURES | |
FLAMMABLE PROPERTIES:
DOES NOT SUPPORT COMBUSTION WITH OXYGEN.
CRYSTALLINE SILICA (QUARTZ) IS NON-FLAMMABLE AND NON-EXPLOSIVE).
FLASH POINT: NOT DETERMINED.
AUTO IGNITION TEMPERATURE: NOT DETERMINED.
LOWER FLAMMABLE/EXPLOSIVE LIMIT: NOT DETERMINED.
UPPER FLAMMABLE/EXPLOSIVE LIMIT: NOT DETERMINED.
FIRE FIGHTING INSTRUCTIONS:
EVACUATE AREA OF UNPROTECTED PERSONNEL. USE COLD WATER SPRAY TO COOL FIRE
EXPOSED CONTAINERS TO MINIMIZE RISK OF RUPTURE. DO NOT ENTER CONFINED FIRE
SPACE WITHOUT FULL PROTECTIVE GEAR. IF POSSIBLE, CONTAIN FIRE RUN-OFF
WATER.
EXTINGUISHING MEDIA:
USE CARBON DIOXIDE (CO2) OR DRY CHEMICAL WHEN FIGHTING FIRES INVOLVING THIS
MATERIAL.
PROTECTIVE EQUIPMENT:
AS IN ANY FIRE, WEAR SELF-CONTAINED BREATHING APPARATUS (SCBA), MSHA/NIOSH
(APPROVED OR EQUIVALENT) AND FULL PROTECTIVE GEAR.
| SECTION 6 - ACCIDENTAL RELEASE MEASURES | |
SPILL CLEANUP MEASURES:
SHOVEL OR SWEEP UP FOR RE-USE OR DISPOSAL. AVOID CREATING DUSTY CONDITIONS.
PROVIDE VENTILATION. CLEAN UP SPILLS IMMEDIATELY OBSERVING PRECAUTIONS IN
THE PROTECTIVE EQUIPMENT SECTION. AFTER REMOVAL, FLUSH SPILL AREA WITH SOAP
AND WATER TO REMOVE TRACE RESIDUE.
AVOID PERSONAL CONTACT AND BREATHING DUST. VENTILATE AREA. USE PROPER
PERSONAL PROTECTIVE EQUIPMENT AS LISTED IN SECTION 8.
PERSONNEL PRECAUTIONS:
EVACUATE AREA AND KEEP UNNECESSARY AND UNPROTECTED PERSONNEL FROM ENTERING
THE SPILL AREA.
ENVIRONMENTAL PRECAUTIONS:
AVOID RUNOFF INTO STORM SEWERS, DITCHES, AND WATERWAYS.
OTHER PRECAUTIONS: PUMP OR SHOVEL TO STORAGE/SALVAGE VESSELS.
| SECTION 7 - HANDLING AND STORAGE | |
HANDLING:
USE WITH ADEQUATE VENTILATION. AVOID BREATHING DUST OR PARTICULATES.
STORAGE:
STORE IN A COOL, DRY, WELL VENTILATED AREA AWAY FROM SOURCES OF HEAT AND
INCOMPATIBLE MATERIALS. KEEP CONTAINER TIGHTLY CLOSED WHEN NOT IN USE.
HYGIENE PRACTICES: WASH THOROUGHLY AFTER HANDLING.
| SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION - EXPOSURE | |
GUIDELINES
ENGINEERING CONTROLS:
USE APPROPRIATE ENGINEERING CONTROL SUCH AS PROCESS ENCLOSURES, LOCAL
EXHAUST VENTILATION, OR OTHER ENGINEERING CONTROLS TO CONTROL AIRBORNE
LEVELS BELOW RECOMMENDED EXPOSURE LIMITS. GOOD GENERAL VENTILATION SHOULD
BE SUFFICIENT TO CONTROL AIRBORNE LEVELS. WHERE SUCH SYSTEMS ARE NOT
EFFECTIVE WEAR SUITABLE PERSONAL PROTECTIVE EQUIPMENT, WHICH PERFORMS
SATISFACTORILY AND MEETS OSHA OR OTHER RECOGNIZED STANDARDS. CONSULT WITH
LOCAL PROCEDURES FOR SELECTION, TRAINING, INSPECTION AND MAINTENANCE OF THE
PERSONAL PROTECTIVE EQUIPMENT.
EYE/FACE PROTECTION:
WEAR APPROPRIATE PROTECTIVE GLASSES OR SPLASH GOGGLES AS DESCRIBED BY 29
CFR 1910.133, OSHA EYE AND FACE PROTECTION REGULATION, OR THE EUROPEAN
STANDARD EN 166.
SKIN PROTECTION DESCRIPTION:
WEAR APPROPRIATE PROTECTIVE GLOVES AND OTHER PROTECTIVE APPAREL TO PREVENT
SKIN CONTACT. CONSULT MANUFACTURER'S DATA FOR PERMEABILITY DATA.
RESPIRATORY PROTECTION:
A NIOSH APPROVED AIR-PURIFYING RESPIRATOR WITH AN ORGANIC VAPOR CARTRIDGE
OR CANISTER MAY BE PERMISSIBLE UNDER CERTAIN CIRCUMSTANCES WHERE AIRBORNE
CONCENTRATIONS ARE EXPECTED TO EXCEED EXPOSURE LIMITS. PROTECTION PROVIDED
BY AIR PURIFYING RESPIRATORS IS LIMITED. USE A POSITIVE PRESSURE AIR
SUPPLIED RESPIRATOR IF THERE IS ANY POTENTIAL FOR AN UNCONTROLLED RELEASE,
EXPOSURE LEVELS ARE NOT KNOWN, OR ANY OTHER CIRCUMSTANCES WHERE AIR
PURIFYING RESPIRATORS MAY NOT PROVIDE ADEQUATE PROTECTION.
OTHER PROTECTIVE:
FACILITIES STORING OR UTILIZING THIS MATERIAL SHOULD BE EQUIPPED WITH AN
EYE WASH AND A DELUGE SHOWER SAFETY STATION.
EXPOSURE GUIDELINES:
CRYSTALLINE SILICA:
GUIDELINE ACGIH: 0.025 MG/M3
TLV-TWA: 0.025 MG/M3 RESPIRABLE FRACTION (R)
GUIDELINE OSHA: (10 MG/M3)/((% SiO2) + 2)
NOTES: ONLY ESTABLISHED PEL AND TLV VALUES FOR THE INGREDIENTS ARE LISTED.
| SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES | |
PHYSICAL STATE APPEARANCE: GRANULAR
COLOR: LIGHT BROWN.
ODOR: ODORLESS.
BOILING POINT: 4046 DEG. F (2230 DEG. C)
MELTING POINT: 2930 DEG. F (1610 DEG. C)
SPECIFIC GRAVITY: 2.65
SOLUBILITY: NEGLIGIBLE
VAPOR DENSITY: NO VAPOR
VAPOR PRESSURE: NOT DETERMINED.
PERCENT VOLATILE: 0
EVAPORATION RATE: NOT DETERMINED.
pH: NEUTRAL.
MOLECULAR FORMULA: MIXTURE
MOLECULAR WEIGHT: MIXTURE
FLASH POINT: NOT DETERMINED.
AUTO IGNITION TEMPERATURE: NOT DETERMINED.
VOC CONTENT: 0 G/L
PERCENT SOLIDS BY WEIGHT: 100
| SECTION 10 - STABILITY AND REACTIVITY | |
CHEMICAL STABILITY: STABLE UNDER NORMAL TEMPERATURES AND PRESSURES.
HAZARDOUS POLYMERIZATION: NOT REPORTED.
CONDITIONS TO AVOID: NONE KNOWN.
INCOMPATIBLE MATERIALS: OXIDIZING AGENTS. STRONG ACIDS AND ALKALIS.
| SECTION 11 - TOXICOLOGICAL INFORMATION | |
CRYSTALLINE SILICA:
RTECS NUMBER: VV7330000
CARCINOGENICITY:
IARC:
GROUP 1: CARCINOGENIC TO HUMANS.
NTP: REASONABLY ANTICIPATED TO BE A HUMAN CARCINOGEN.
| SECTION 12 - ECOLOGICAL INFORMATION | |
ECOTOXICITY: NO ECOTOXICITY DATA WAS FOUND FOR THE PRODUCT.
ENVIRONMENTAL FATE: NO ENVIRONMENTAL INFORMATION FOUND FOR THIS PRODUCT.
| SECTION 13 - DISPOSAL CONSIDERATIONS | |
WASTE DISPOSAL:
CONSULT WITH THE US EPA GUIDELINES LISTED IN 40 CFR PART 261.3 FOR THE
CLASSIFICATIONS OF HAZARDOUS WASTE PRIOR TO DISPOSAL. FURTHERMORE, CONSULT
WITH YOUR STATE AND LOCAL WASTE REQUIREMENTS OR GUIDELINES, IF APPLICABLE,
TO ENSURE COMPLIANCE. ARRANGE DISPOSAL IN ACCORDANCE TO THE EPA AND/OR
STATE AND LOCAL GUIDELINES.
RCRA NUMBER: NONE.
| SECTION 14 - TRANSPORT INFORMATION | |
DOT SHIPPING NAME: NON REGULATED.
DOT UN NUMBER: N/A
DOT HAZARD CLASS: NOT APPLICABLE.
DOT PACKING GROUP: NOT APPLICABLE.
| SECTION 15 - REGULATORY INFORMATION | |
CRYSTALLINE SILICA:
TSCA INVENTORY STATUS: LISTED
MASSACHUSETTS: LISTED
PENNSYLVANIA: LISTED
CANADA DSL: LISTED
CANADIAN REGULATIONS.
WHMIS HAZARD CLASS(ES): D2B; D2A
ALL COMPONENTS OF THIS PRODUCT ARE ON THE CANADIAN DOMESTIC SUBSTANCES
LIST.
| SECTION 16 - ADDITIONAL INFORMATION | |
HMIS HEALTH HAZARD 1*
HMIS FIRE HAZARD 0
HMIS REACTIVITY 0
HMIS PERSONAL PROTECTION X
MSDS REVISION DATE: 06/30/2012
MSDS AUTHOR: ACTIO CORPORATION
DISCLAIMER:
THIS HEALTH AND SAFETY INFORMATION IS CORRECT TO THE BEST OF OUR KNOWLEDGE
AND BELIEF AT THE DATE OF ITS PUBLICATION BUT WE CANNOT ACCEPT LIABILITY
FOR ANY LOSS, INJURY OR DAMAGE WHICH MAY RESULT FROM ITS USE. THE
INFORMATION GIVEN IN THE DATA SHEET IS DESIGNED ONLY AS A GUIDANCE FOR SAFE
HANDLING, STORAGE AND THE USE OF THE SUBSTANCE. IT IS NOT A SPECIFICATION
NOR DOES IT GUARANTEE ANY SPECIFIC PROPERTIES. ALL CHEMICALS SHOULD BE
HANDLED ONLY BY COMPETENT PERSONNEL, WITHIN A CONTROLLED ENVIRONMENT.
COPYRIGHT(C) 1996-2011 ACTIO SOFTWARE CORPORATION. ALL RIGHTS RESERVED.