| Common Name: | ACME UNITED CUT CLEANER |
| Manufacturer: | SAFETEC OF AMERICA |
| SDS Revision Date: | 7/11/2013 |
| SDS Format: | No Format Specified |
| Item Number(s): | 39N925 |
| Manufacturer Model Number(s): |
SDS Table of Contents
Click the desired link below to jump directly to that section in the SDS.
MATERIAL SAFETY DATA SHEET
MAY BE USED TO COMPLY WITH OSHA'S HAZARD COMMUNICATION STANDARD 29 CFR
1910.1200. STANDARD MUST BE CONSULTED FOR SPECIFIC REQUIREMENTS.
HMIS HAZARD RATING:
HEALTH 0
FLAMMABILITY 0
REACTIVITY 0
0 = INSIGNIFICANT
1 = SLIGHT
2 = MODERATE
3 = HIGH
4 = EXTREME
SAFETEC OF AMERICA
| SECTION 1 - PRODUCT / COMPANY IDENTIFICATION |  |
IDENTITY (AS USED ON LABEL AND LIST): ACME UNITED CUT CLEANER
MANUFACTURER'S NAME: SAFETEC OF AMERICA, INC.
ADDRESS (NUMBER, STREET, P.O. BOX): 887 KENSINGTON AVE.
(CITY, STATE AND ZIP CODE): BUFFALO, NY 14215
EMERGENCY TELEPHONE NUMBER (24 HOURS): (800) 255-3924
TELEPHONE NUMBER FOR INFORMATION: (716) 895-1822
DATE PREPARED: JULY 11, 2013
SUPERSEDES: N/A
| SECTION 2 - HAZARDS IDENTIFICATION | |
ROUTES OF ENTRY - SIGNS AND SYMPTOMS OF EXPOSURE:
INHALATION:
BRIEF (MINUTES) INHALATION WILL NOT CAUSE ADVERSE EFFECTS, ALTHOUGH,
CONSTANT INHALATION MAY CAUSE IRRITATION TO UPPER RESPIRATORY TRACT,
HEADACHE, DIZZINESS, OR NAUSEA.
SKIN: PROLONGED OR REPEATED SKIN CONTACT MAY CAUSE MILD IRRITATION.
EYES:
BRIEF CONTACT TO LIQUID OR VAPORS MAY CAUSE MILD IRRITATION; PROLONGED
CONTACT MAY CAUSE MODERATE IRRITATION ASSOCIATED WITH REDNESS.
INGESTION: PRACTICALLY NON-TOXIC IF INGESTED.
HEALTH HAZARDS (ACUTE):
HIGH CONCENTRATION IN IMMEDIATE AREA CAN DISPLACE OXYGEN AND CAN CAUSE
DIZZINESS, UNCONSCIOUSNESS, AND EVEN DEATH WITH LONGER EXPOSURE. KEEP
PEOPLE AWAY FROM SUCH VAPORS WITHOUT SELF-CONTAINED BREATHING APPARATUS.
MEDICAL CONDITIONS GENERALLY AGGRAVATED BY EXPOSURE:
PREEXISTING SKIN, OR EYE DISORDERS MAY BECOME AGGRAVATED THROUGH PROLONGED
EXPOSURE.
| SECTION 3 - COMPOSITION/INFORMATION ON INGREDIENTS | |
HAZARDOUS COMPONENTS CAS # % (WT.) ACGIH TLV/TWA/STEL
(SPECIFIC CHEMICAL (OPTIONAL) PPM MG/M3
IDENTITY;
COMMON NAME(S)
ISOPROPYL ALCOHOL 67-63-0 50 400 (TLV/TWA), 983 (TLV/TWA),
500 (TLV/STEL) 1230 (TLV/STEL)
THIS PRODUCT IS NOT KNOWN TO CONTAIN A SUBSTANCE SUBJECT TO SECTION 313 OF
TITLE III OF THE SUPERFUND AMENDMENTS AND REAUTHORIZATION ACT OF 1986
(SARA) AND 40 CFR 372 AT OR ABOVE MINIMAL AMOUNTS.
| SECTION 4 - FIRST AID MEASURES | |
EMERGENCY AND FIRST AID PROCEDURES:
INHALATION:
REMOVE VICTIM TO FRESH AIR; PROVIDE OXYGEN IF BREATHING IS DIFFICULT; GET
MEDICAL ATTENTION.
SKIN:
WASH CONTAMINATED SKIN WITH WATER; IF IRRITATION OCCURS AND PERSISTS SEEK
MEDICAL ATTENTION.
EYES:
FLUSH EYES WITH CLEAR RUNNING WATER FOR A MINIMUM OF FIFTEEN (15) MINUTES
WHILE HOLDING EYELIDS OPEN; IF IRRITATION PERSISTS, SEEK MEDICAL ATTENTION.
INGESTION: FIRST AID NOT NORMALLY REQUIRED.
| SECTION 5 - FIRE FIGHTING MEASURES | |
FLASH POINT (METHOD USED): 91 DEG. F (CLEVELAND OC METHOD)
FLAMMABLE LIMITS (% VOLUME IN AIR FOR LOWEST FLASHING COMPONENT):
ISOPROPYL ALCOHOL
LEL: 2.5
UEL: 11.8
EXTINGUISHING MEDIA:
WATER SPRAY, DRY CHEMICALS, ALCOHOL-TYPE OR ALL PURPOSE FOAM, CO2
SPECIAL FIRE FIGHTING PROCEDURES:
POSITIVE PRESSURE NIOSH APPROVED SELF-CONTAINED BREATHING APPARATUS.
UNUSUAL FIRE AND EXPLOSIVE HAZARDS: CONCENTRATED VAPORS MAY BE FLAMMABLE.
| SECTION 6 - ACCIDENTAL RELEASE MEASURES | |
STEPS TO BE TAKEN IF MATERIAL IS SPILLED OR RELEASED:
REMOVE ALL SOURCES OF IGNITION. AVOID PROLONGED EXPOSURE TO VAPORS. SPILLS
SHOULD BE COLLECTED WITH APPROVED INERT ABSORBENT FOR DISPOSAL. USE
SUITABLE DISPOSAL CONTAINERS REPORT PER REGULATORY REQUIREMENTS.
| SECTION 7 - HANDLING AND STORAGE | |
HANDLING:
KEEP CONTAINER(S) TIGHTLY CLOSED WHEN NOT IN USE. AVOID INHALATION OF HIGH
CONCENTRATION OF VAPORS.
STORAGE:
STORE IN COOL, DRY, WELL VENTILATED AREA AWAY FROM OXIDIZERS, FLAME,
IGNITION SOURCES AND HEAT. KEEP THIS AND OTHER CHEMICALS OUT OF REACH OF
CHILDREN.
| SECTION 8 - EXPOSURE CONTROLS/PERSONAL PROTECTION | |
RESPIRATORY PROTECTION: ORDINARY, NONE REQUIRED
VENTILATION:
LOCAL EXHAUST: RECOMMENDED
MECHANICAL (GENERAL): NOT REQUIRED
PROTECTIVE GLOVES: ORDINARY, NONE REQUIRED
EYE PROTECTION: SAFETY GLASSES
OTHER PROTECTIVE CLOTHING OR EQUIPMENT:
EYE WASH STATIONS SHOULD BE NEARBY AND READY FOR USE.
WORK/HYGIENIC PRACTICES:
PRACTICE SAFE WORK HABITS. USE ACCORDING TO LABEL INSTRUCTIONS.
| SECTION 9 - PHYSICAL/CHEMICAL PROPERTIES | |
BOILING POINT: 180.5 DEG. F
SPECIFIC GRAVITY (WATER = 1): 0.98
VAPOR PRESSURE (MM Hg): NO DATA
MELTING POINT: NO APPLICABLE
VAPOR DENSITY (AIR = 1): NO DATA
PH:
SOLUBILITY IN WATER: SLIGHTLY SOLUBLE
EVAPORATION RATE (IPA = 1): NO DATA
APPEARANCE AND ODOR: CLEAR LIQUID; ANTISEPTIC ODOR.
% VOLATILES (BY VOLUME): 94
| SECTION 10 - STABILITY AND REACTIVITY | |
STABILITY:
UNSTABLE ( )
STABLE (XXX)
CONDITIONS TO AVOID: FLAME, SOURCES OF IGNITION, HEAT
INCOMPATIBILITIES (MATERIALS TO AVOID): OXIDIZERS, ACIDS, ALKALIS
HAZARDOUS DECOMPOSITION OR BYPRODUCTS:
THERMAL DECOMPOSITION MAY EMIT CARBON MONOXIDE, CARBON DIOXIDE, AND OTHER
UNIDENTIFIED ORGANIC COMPOUNDS.
HAZARDOUS POLYMERIZATION:
MAY OCCUR ( )
WILL NOT OCCUR (XXX)
CONDITIONS TO AVOID:
HEAT, SPARKS, OPEN FLAME, AND OTHER SOURCES OF IGNITION.
| SECTION 11 - TOXICOLOGICAL INFORMATION | |
COMPONENT ANALYSIS - LC50: N/A
COMPONENT ANALYSIS - LD50: N/A
EFFECTS OF ACUTE EXPOSURE:
HIGH CONCENTRATION IN IMMEDIATE AREA CAN DISPLACE OXYGEN AND CAN CAUSE
DIZZINESS, UNCONSCIOUSNESS, AND EVEN DEATH WITH LONGER EXPOSURE. KEEP
PEOPLE AWAY FROM SUCH VAPORS WITHOUT SELF-CONTAINED BREATHING APPARATUS.
SENSITIZATION: NON-HAZARDOUS BY WHMIS/OSHA CRITERIA.
CHRONIC EFFECTS:
HIGH CONCENTRATION IN IMMEDIATE AREA CAN DISPLACE OXYGEN AND CAN CAUSE
DIZZINESS, UNCONSCIOUSNESS, AND EVEN DEATH WITH LONGER EXPOSURE. KEEP
PEOPLE AWAY FROM SUCH VAPORS WITHOUT SELF-CONTAINED BREATHING APPARATUS.
CARCINOGENITY: NON-HAZARDOUS BY WHMIS/OSHA CRITERIA.
MUTAGENITY: NON-HAZARDOUS BY WHMIS/OSHA CRITERIA.
REPRODUCTIVE EFFECTS: NON-HAZARDOUS BY WHMIS/OSHA CRITERIA.
TERATOGENITY: NON-HAZARDOUS BY WHMIS/OSHA CRITERIA.
| SECTION 12 - ECOLOGICAL INFORMATION | |
COMPONENT ANALYSIS - LC50: N/A
COMPONENT ANALYSIS - LD50: N/A
ECOTOXICITY: N/A
ENVIRONMENTAL EFFECTS: N/A
AQUATIC TOXICITY: N/A
PERSISTENCE / DEGRADABILITY: N/A
BIOACCUMULATION / ACCUMULATION: N/A
PARTITION COEFFICIENT: N/A
MOBILITY IN ENVIRONMENTAL MEDIA: N/A
CHEMICAL FATE INFORMATION: N/A
OTHER ADVERSE EFFECTS: N/A
| SECTION 13 - DISPOSAL CONSIDERATIONS | |
DISPOSE OF IN ACCORDANCE WITH LOCAL, STATE, AND FEDERAL REGULATIONS.
PRODUCTS CLASSIFIED AS NON-HAZARDOUS MAY BECOME HAZARDOUS WASTE UPON
CONTACT WITH OTHER PRODUCTS. REFER TO "40 CFR PROTECTION OF ENVIRONMENT
PARTS 260-299" FOR COMPLETE WASTE DISPOSAL REGULATIONS. CONSULT YOUR LOCAL,
STATE, OR FEDERAL ENVIRONMENTAL PROTECTION AGENCY BEFORE DISPOSING OF ANY
CHEMICALS.
WASTE FROM RESIDUES/UNUSED PRODUCT: N/A
CONTAMINATED PACKAGING: N/A
| SECTION 14 - TRANSPORTATION INFORMATION | |
PROPER SHIPPING NAME: RAW HEAT
HAZARD CLASS/PKG. GRP.: NOT APPLICABLE
IDENTIFICATION NUMBER: NOT APPLICABLE
REF.: NOT APPLICABLE
LABEL: NONE REQUIRED GROUND
| SECTION 15 - REGULATORY INFORMATION | |
CANADIAN FEDERAL REGULATION: N/A
US FEDERAL REGULATION:
THIS PRODUCT IS A "HAZARDOUS CHEMICAL" AS DEFINED BY THE OSHA HAZARD
COMMUNICATION STANDARD, 29 CFR 1910.1200. ALL COMPONENTS ARE ON THE U.S.
EPA TSCA INVENTORY LIST.
OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION (OSHA):
29 CFR 1910.1200 HAZARDOUS CHEMICAL: YES
CERCLA (SUPERFUND) REPORTABLE QUANTITY: N/A
SUPERFUND AMENDMENTS AND REAUTHORIZATION ACT OF 1986 (SARA): N/A
CLEAN AIR ACT (CAA): N/A
CLEAN WATER ACT (CWA): N/A
SAFE DRINKING WATER ACT (SDWA): N/A
DRUG ENFORCEMENT AGENCY (DEA): N/A
FOOD AND DRUG ADMINISTRATION (FDA): N/A
WHMIS CLASSIFICATION: N/A
STATE REGULATIONS: N/A
INVENTORY NAME: N/A
| SECTION 16 - OTHER INFORMATION | |
THE INFORMATION CONTAINED HEREIN IS BELIEVED TO BE ACCURATE BUT IS NOT
WARRANTED TO BE SO. USERS ARE ADVISED TO CONFIRM IN ADVANCE OF NEED THAT
INFORMATION IS CURRENT, APPLICABLE AND SUITED TO THE CIRCUMSTANCES OF USE.
VENDOR ASSUMES NO RESPONSIBILITY FOR INJURY TO VENDEE OR THIRD PERSONS
PROXIMATELY CAUSED BY THE MATERIAL IF REASONABLE SAFETY PROCEDURES ARE NOT
ADHERED TO AS STIPULATED IN THE DATA SHEET. FURTHERMORE, VENDOR ASSUMES NO
RESPONSIBILITY FOR INJURY CAUSED BY ABNORMAL USE OF THIS MATERIAL EVEN IF
REASONABLE SAFETY PROCEDURES ARE FOLLOWED.
DATE PREPARED: JULY 11, 2013
MSDS PREPARED BY:
SAFETEC OF AMERICA, INC.
887 KENSINGTON AVE.
BUFFALO, NY 14215
(716) 895-1822
FORM REVISED: 9/2012