| Common Name: | VITRIFIED ABRASIVE PRODUCT, 983468_BA_VIT |
| Manufacturer: | SAINT-GOBAIN ABRASIVES |
| SDS Revision Date: | 7/1/2013 |
| SDS Format: | No Format Specified |
| Item Number(s): | 13D668, 13D670, 26ZV55, 26ZV68, 26ZV69, 26ZV70, 26ZV71, 26ZV72, 26ZV73, 26ZV74, 26ZV75, 26ZV76, 26ZV77, 26ZV78, 26ZV79, 26ZV80, 26ZV81, 26ZV82, 26ZV83, 26ZV84, 26ZV85, 26ZV86, 26ZV87, 26ZV88, 26ZV89, 26ZV90, 26ZV91, 26ZV92, 26ZV93, 26ZV94, 26ZV95, 26ZV96, 26ZV97, 26ZV98, 26ZW04, 26ZW05, 26ZW06, 26ZW45, 26ZW46, 26ZW47, 26ZW48, 26ZW49, 26ZW50, 26ZW51, 26ZW52, 26ZW53, 26ZW54, 26ZW55, 26ZW56, 26ZW57, 26ZW58, 26ZW59, 26ZW60, 26ZW61, 26ZW62, 26ZW63, 26ZW64, 26ZW65, 26ZW66, 26ZW67, 26ZW68, 26ZW69, 26ZW70, 26ZW71, 26ZW72, 26ZW73, 26ZW74, 26ZW75, 26ZW76, 26ZW77, 26ZW78, 26ZW79, 26ZW80, 26ZW81, 26ZW82, 26ZW83, 26ZW84, 26ZW85, 26ZW86, 26ZW87, 26ZW88, 26ZW89, 26ZW90, 26ZW91, 26ZW92, 26ZW93, 26ZW94, 26ZW95, 26ZW96, 26ZW97, 26ZW98, 4F771 |
| Manufacturer Model Number(s): |
SDS Table of Contents
Click the desired link below to jump directly to that section in the SDS.
SAINT-GOBAIN ABRASIVES
| SECTION 1 - PRODUCT AND COMPANY IDENTIFICATION |  |
PRODUCT NAME: VITRIFIED ABRASIVE PRODUCT
MSDS MANUFACTURER NUMBER: 983468_BA_VIT
MANUFACTURER NAME: SAINT-GOBAIN ABRASIVES, INC.
ADDRESS:
1 NEW BOND STREET
WORCESTER, MA 01615
GENERAL PHONE NUMBER: 508-795-5000
EMERGENCY PHONE NUMBER: 508-795-5000
WEBSITE: WWW.NORTONABRASIVES.COM
MSDS CREATION DATE: JUNE 17, 2011
MSDS REVISION DATE: JULY 01, 2013
(M)SDS FORMAT:
NFPA:
0
0
1
HMIS:
HEALTH HAZARD 1
FIRE HAZARD 0
REACTIVITY 1
PERSONAL PROTECTION X
| SECTION 2 - COMPOSITION/INFORMATION ON INGREDIENTS | |
CHEMICAL NAME CAS# INGREDIENT PERCENT EC NUM.
ALUMINUM OXIDE, NON-FIBROUS 1344-28-1 60 - 100 BY WEIGHT 215-691-6
AMORPHOUS SILICA, FUSED 60676-86-0 10 - 30 BY WEIGHT 262-373-8
| SECTION 3 - HAZARDS IDENTIFICATION | |
POTENTIAL HEALTH EFFECTS:
EYE: DUST MAY CAUSE SLIGHT IRRITATION.
SKIN: DUST FROM THIS PRODUCT MAY CAUSE TEMPORARY MECHANICAL IRRITATION.
INHALATION:
DUSTS FROM THIS PRODUCT MAY CAUSE MECHANICAL IRRITATION OF THE NOSE,
THROAT AND RESPIRATORY TRACT.
INGESTION:
INGESTION OF THIS PRODUCT IS UNLIKELY. HOWEVER, INGESTION OF PRODUCT MAY
PRODUCE GASTROINTESTINAL IRRITATION AND DISTURBANCES.
CHRONIC HEALTH EFFECTS: MAY AFFECT BREATHING CAPACITY.
| SECTION 4 - FIRST AID MEASURES | |
EYE CONTACT:
IMMEDIATELY FLUSH EYES WITH PLENTY OF WATER FOR AT LEAST 15 TO 20 MINUTES.
ENSURE ADEQUATE FLUSHING OF THE EYES BY SEPARATING THE EYELIDS WITH
FINGERS.
GET MEDICAL ATTENTION, IF IRRITATION OR SYMPTOMS OF OVEREXPOSURE PERSISTS.
SKIN CONTACT:
IMMEDIATELY WASH SKIN WITH SOAP AND PLENTY OF WATER.
GET MEDICAL ATTENTION IF IRRITATION DEVELOPS OR PERSISTS.
INHALATION:
IF DUST FROM CUTTING OR DRILLING IS INHALED, REMOVE THE AFFECTED PERSON
TO FRESH AIR. IF SYMPTOMS PERSIST, GET MEDICAL ATTENTION.
INGESTION:
ACCIDENTAL INGESTION OF THIS MATERIAL IS UNLIKELY. IF THIS DOES OCCUR,
WATCH PERSON FOR SEVERAL DAYS TO MAKE SURE INTESTINAL BLOCKAGE DOES NOT
OCCUR. IF SYMPTOMS PERSIST, CALL A PHYSICIAN.
NOTE TO PHYSICIANS: NO INFORMATION AVAILABLE.
| SECTION 5 - FIRE FIGHTING MEASURES | |
FLAMMABLE PROPERTIES: NON FLAMMABLE.
FLASH POINT: DOES NOT APPLY.
AUTO IGNITION TEMPERATURE: NOT DETERMINED.
LOWER FLAMMABLE/EXPLOSIVE LIMIT: NOT AVAILABLE.
UPPER FLAMMABLE/EXPLOSIVE LIMIT: NOT AVAILABLE.
EXTINGUISHING MEDIA:
USE ANY EXTINGUISHING MEDIA APPROPRIATE FOR THE SURROUNDING FIRES.
UNSUITABLE MEDIA: NONE.
PROTECTIVE EQUIPMENT:
AS IN ANY FIRE, WEAR SELF-CONTAINED BREATHING APPARATUS PRESSURE-DEMAND,
MSHA/NIOSH (APPROVED OR EQUIVALENT) AND FULL PROTECTIVE GEAR.
NFPA RATINGS:
NFPA HEALTH 0
NFPA FLAMMABILITY 0
NFPA REACTIVITY 1
NFPA OTHER
| SECTION 6 - ACCIDENTAL RELEASE MEASURES | |
METHODS FOR CONTAINMENT:
CONTAINMENT OF THIS MATERIAL SHOULD NOT BE NECESSARY.
METHODS FOR CLEANUP:
SHOVEL OR SWEEP UP FOR RE-USE OR DISPOSAL. AVOID CREATING DUSTY CONDITIONS.
EVALUATE RESIDUE TO DETERMINE IF IT IS A HAZARDOUS WASTE BY CHARACTERISTIC.
DISPOSE OF IN ACCORDANCE WITH LOCAL, STATE, FEDERAL AND PROVINCIAL
REGULATIONS.
| SECTION 7 - HANDLING AND STORAGE | |
HANDLING:
ALWAYS HANDLE AND STORE WHEELS IN A CAREFUL MANNER.
ALWAYS VISUALLY INSPECT ALL WHEELS BEFORE MOUNTING.
ALWAYS CHECK MACHINE SPEED AGAINST THE ESTABLISHED MAXIMUM SAFE OPERATING
SPEED MARKED ON THE WHEEL.
ALWAYS CHECK MOUNTING FLANGES FOR EQUAL AND CORRECT DIAMETER.
ALWAYS USE MOUNTING BLOTTERS.
ALWAYS BE SURE WORK REST IS PROPERLY ADJUSTED.
ALWAYS USE A SAFETY GUARD COVERING AT LEAST ONE-HALF OF THE GRINDING WHEEL.
ALWAYS ALLOW NEWLY MOUNTED WHEELS TO RUN AT OPERATING SPEED, WITH GUARD
IN PLACE, FOR AT LEAST ONE MINUTE BEFORE GRINDING.
ALWAYS TURN OFF COOLANT BEFORE STOPPING WHEEL TO AVOID CREATING AN
OUT-OF-BALANCE WHEEL.
STORAGE: NO SPECIAL STORAGE CONDITIONS REQUIRED.
HYGIENE PRACTICES: WEAR SUITABLE GLOVES AND EYE/FACE PROTECTION.
| SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION | |
- EXPOSURE GUIDELINES
ENGINEERING CONTROLS:
GENERAL DILUTION VENTILATION AND/OR LOCAL EXHAUST VENTILATION SHOULD BE
PROVIDED AS NECESSARY TO MAINTAIN EXPOSURES BELOW OCCUPATIONAL EXPOSURE
LIMITS.
EYE/FACE PROTECTION:
ALWAYS WEAR SAFETY GLASSES OR SOME TYPE OF EYE PROTECTION WHEN GRINDING.
SKIN PROTECTION DESCRIPTION:
PROTECTIVE GLOVES.
LONG SLEEVED SHIRT AND LONG PANTS.
RESPIRATORY PROTECTION:
WHEN WORKERS ARE FACING AIRBORNE PARTICULATE/DUST CONCENTRATIONS ABOVE THE
EXPOSURE LIMIT THEY MUST USE APPROPRIATE CERTIFIED RESPIRATORS. A PROPERLY
FITTED NIOSH APPROVED DISPOSABLE N 95 TYPE DUST RESPIRATOR OR BETTER IS
RECOMMENDED.
OTHER PROTECTIVE:
USE OF THIS PRODUCT MAY CREATE ELEVATED SOUND LEVELS. HEARING PROTECTION
SHOULD BE WORN WHERE REQUIRED (SEE OSHA 29 CFR 1910.134 AND OTHER
APPLICABLE REGULATIONS).
GENERAL HYGIENE CONSIDERATIONS:
HANDLE IN ACCORDANCE WITH GOOD INDUSTRIAL HYGIENE AND SAFETY PRACTICE.
REMOVE AND WASH CONTAMINATED CLOTHING BEFORE RE-USE.
AVOID GETTING DUST INTO BOOTS AND GLOVES THROUGH WRIST BANDS AND PANT
TUCKS.
EXPOSURE GUIDELINES:
INGREDIENT GUIDELINE OSHA GUIDELINE NIOSH GUIDELINE ACGIH
ALUMINUM OXIDE, PEL-TWA: TLV-TWA:
NON-FIBROUS 5 MG/M3 RESPIRABLE 10 MG/M3
FRACTION(R)
PEL-TWA:
15 MG/M3 TOTAL
PARTICULATE/DUST
(T)
AMORPHOUS OSHA PEL-TWA: REL-TWA: ACGIH TLV-TWA:
SILICA, FUSED 0.1 MG/M3 0.05 MG/M3 0.1 MG/M3
(RESPIRABLE)
INGREDIENT QUEBEC CANADA ONTARIO CANADA
ALUMINUM OXIDE, VEMP-TWA: TWAEV-TWA:
NON-FIBROUS 10 MG/M3 (TOTAL 10 MG/M3 (TOTAL
PARTICULATE/DUST) PARTICULATE/DUST)
VEMP-TWA: OEL-TWAEV:
10 MG/M3 TOTAL 10 MG/M3 TOTAL
PARTICULATE/DUST (T) PARTICULATE/DUST (T)
AMORPHOUS SILICA, FUSED VEMP-TWA: TWAEV-TWA:
0.1 MG/M3 (RESPIRABLE) 0.1 MG/M3 (RESPIRABLE)
VEMP-TWA: OEL-TWAEV:
0.1 MG/M3 RESPIRABLE 0.1 MG/M3 RESPIRABLE
FRACTION (R) FRACTION (R)
INGREDIENT ALBERTA MEXICO BRITISH COLUMBIA
CANADA CANADA
ALUMINUM OXIDE, OEL-TWA: VEMP-TWA: OEL-TWA:
NON-FIBROUS 10 MG/M3 10 MG/M3 (TOTAL 3 MG/M3 RESPIRABLE
PARTICULATE/DUST) FRACTION (R)
LMPE-PPT: 10 MG/M3 OEL-TWA: 10 MG/M3
OEL-TWA:
10 MG/M3 TOTAL
PARTICULATE/DUST (T)
OEL-STEL:
20 MG/M3 TOTAL
PARTICULATE/DUST (T)
AMORPHOUS OEL-TWA: VEMP-TWA:
SILICA, FUSED 0.1 MG/M3 0.1 MG/M3
RESPIRABLE (RESPIRABLE)
FRACTION (R) LMPE-PPT:
0.1 MG/M3
RESPIRABLE
FRACTION (R)
| SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES | |
PHYSICAL STATE APPEARANCE: SOLID ARTICLE.
ODOR: ODORLESS
FLASH POINT: DOES NOT APPLY.
AUTO IGNITION TEMPERATURE: NOT DETERMINED.
| SECTION 10 - STABILITY AND REACTIVITY | |
CHEMICAL STABILITY: STABLE UNDER NORMAL CONDITIONS.
HAZARDOUS POLYMERIZATION: HAZARDOUS POLYMERIZATION DOES NOT OCCUR.
SPECIAL DECOMPOSITION PRODUCTS:
IN USE, DUST AND DECOMPOSING ODORS MAY BE GENERATED. IN MOST CASES, THE
MATERIAL REMOVED FROM THE WORKPLACE WILL BE SIGNIFICANTLY GREATER THAN THE
GRINDING WHEEL COMPONENTS. COOLANTS MAY PRODUCE OTHER DECOMPOSITION
PRODUCTS.
| SECTION 11 - TOXICOLOGICAL INFORMATION | |
ACUTE TOXICITY: THIS PRODUCT HAS NOT BEEN TESTED FOR ITS TOXICITY.
CARCINOGENS:
ACGIH NIOSH OSHA IARC NTP
ALUMINUM OXIDE, A4 NOT NO DATA NO DATA NO DATA NO DATA
NON-FIBROUS CLASSIFIABLE
AS A HUMAN
CARCINOGEN
AMORPHOUS SILICA, NO DATA NIOSH NO DATA NO DATA NO DATA
FUSED CARCINOGEN
ALUMINUM OXIDE, NON-FIBROUS:
RTECS NUMBER: "BD1200000"
INHALATION:
INHALATION - RAT TCLO:
200 MG/M3/5H/28W (INTERMITTENT) [LUNGS, THORAX, OR RESPIRATION - STRUCTURAL
OR FUNCTIONAL CHANGE IN TRACHEA OR BRONCHI; LUNGS, THORAX, OR RESPIRATION -
CHRONIC PULMONARY EDEMA; RELATED TO CHRONIC DATA - DEATH] (RTECS)
AMORPHOUS SILICA, FUSED:
RTECS NUMBER: "VV7328000"
INHALATION:
INHALATION - RAT TCLO:
197 MG/M3/6H/26W (INTERMITTENT) [LUNGS, THORAX, FOR RESPIRATION - CHANGES
IN LUNG WEIGHT] (RTECS)
| SECTION 12 - ECOLOGICAL INFORMATION | |
BIODEGRADATION: NO ENVIRONMENTAL INFORMATION FOUND FOR THIS PRODUCT.
| SECTION 13 - DISPOSAL CONSIDERATIONS | |
WASTE DISPOSAL:
USE STANDARD LANDFILL METHODS CONSISTENT WITH APPLICABLE FEDERAL, STATE,
PROVINCIAL AND LOCAL LAWS.
| SECTION 14 - TRANSPORT INFORMATION | |
DOT SHIPPING NAME: NOT REGULATED AS HAZARDOUS MATERIAL FOR TRANSPORTATION.
DOT UN NUMBER: NOT REGULATED AS HAZARDOUS MATERIAL FOR TRANSPORTATION.
IATA SHIPPING NAME: NOT REGULATED AS HAZARDOUS MATERIAL FOR TRANSPORTATION.
CANADIAN SHIPPING NAME:
THIS PRODUCT IS NOT REGULATED UNDER THE TRANSPORTATION OF DANGEROUS GOODS
ACT. (CAN)
| SECTION 15 - REGULATORY INFORMATION | |
ALUMINUM OXIDE, NON-FIBROUS:
TSCA INVENTORY STATUS: LISTED
EINECS NUMBER: 262-373-8
NEW JERSEY:
LISTED: NJ HAZARDOUS LIST
SUBSTANCE NUMBER: 2891
MASSACHUSETTS: LISTED
PENNSYLVANIA: LISTED
MINNESOTA: LISTED
ILLINOIS: NO DATA
RHODE ISLAND: LISTED
CANADA DSL: LISTED
EC NUMBER: 215-691-6
AMORPHOUS SILICA, FUSED:
TSCA INVENTORY STATUS: LISTED
EINECS NUMBER: 262-373-8
MASSACHUSETTS: LISTED
RHODE ISLAND: LISTED
CANADA DSL: LISTED
EC NUMBER: 262-373-8
| SECTION 16 - ADDITIONAL INFORMATION | |
MSDS CREATION DATE: JUNE 17, 2011
MSDS REVISION DATE: JULY 01, 2013
COPYRIGHT(C) 1996-2011 ACTIO CORPORATION. ALL RIGHTS RESERVED.
UPC NUMBER: 61463624399 983468_BA_VIT
REVISION: 07/01/2013