| Common Name: | INDUSTRIAL SUPREME LOW CONDUCTIVITY ANTIFREEZE/COOLANT |
| Manufacturer: | STARBRITE |
| SDS Revision Date: | 4/23/2013 |
| SDS Format: | No Format Specified |
| Item Number(s): | 4UV46 |
| Manufacturer Model Number(s): |
SDS Table of Contents
Click the desired link below to jump directly to that section in the SDS.
MATERIAL SAFETY DATA SHEET
PREPARED TO U.S. OSHA, CMA, ANSI, CANADIAN WHMIS STANDARDS AND EUROPEAN
UNION DIRECTIVES
PART I WHAT IS THE MATERIAL AND WHAT DO I NEED TO KNOW IN AN EMERGENCY?
| 1. PRODUCT IDENTIFICATION |  |
TRADE NAME (AS LABELED):
INDUSTRIAL SUPREME LOW CONDUCTIVITY ANTIFREEZE/COOLANT
PRODUCT USE: COOLANT
PRODUCT NUMBER: 043810
MANUFACTURER'S NAME: STARBRITE DIST.
U.S. ADDRESS:
4041 SW 47TH AV
FT. LAUDERDALE, FL 33314
U.S. EMERGENCY PHONE:
CHEMTREC: (800) 424-9300 OR (703) 527-3887
REVISION DATE: 04/23/13
REPLACES: 5/31/12
| 2. COMPOSITION AND INFORMATION ON INGREDIENTS | |
CHEMICAL NAME CAS # TLV VAPOR PRESSURE (MMHg)
ETHYLENE GLYCOL 107-21-1 50 >9%
1,2-ETHANEDIOL
NOTE:
ALL CANADIAN WHMIS REQUIRED INFORMATION IS INCLUDED IN APPROPRIATE SECTIONS
BASED ON THE ANSI Z400.1-1998 FORMAT. THIS PRODUCT HAS BEEN CLASSIFIED IN
ACCORDANCE WITH THE HAZARD CRITERIA OF THE CPR AND THE MSDS CONTAINS ALL
THE INFORMATION REQUIRED BY THE CPR. THE MSDS IS ALSO PREPARED TO INCLUDE
ALL EUROPEAN UNION REQUIRED INFORMATION UNDER EU DIRECTIVES.
| 3. HAZARD IDENTIFICATION | |
SYMPTOMS OF OVEREXPOSURE BY ROUTE OF EXPOSURE:
THE MOST SIGNIFICANT ROUTES OF OCCUPATIONAL OVEREXPOSURE ARE INHALATION
AND CONTACT WITH SKIN AND EYES. THE SYMPTOMS OF OVEREXPOSURE TO THIS
PRODUCT ARE DESCRIBED ON THE FOLLOWING.
INHALATION:
FORMATION OF MISTS OR SPRAYS OF THIS PRODUCT ARE UNLIKELY. IF THIS PRODUCT
INHALED, FUME, MISTS OR SPRAYS CAN MILDLY IRRITATE THE RESPIRATORY SYSTEM
AND CAUSE COUGHING, SNEEZING, AND DIFFICULTY BREATHING. DEPENDING ON THE
CONCENTRATION AND DURATION OF EXPOSURE, INHALATION OVEREXPOSURE CAN CAUSE
IRRITATION OF THROAT, HEADACHE, NAUSEA, AND DROWSINESS.
INGESTION:
CONTAINS ETHYLENE GLYCOL, WHICH IS TOXIC WHEN SWALLOWED. A LETHAL DOSE FOR
AN ADULT IS 1-2ML PER KILOGRAM. SYMPTOMS MAY INCLUDE HEADACHE, WEAKNESS,
CONFUSION, COMA, NAUSEA, AND VOMITING, SLURRED SPEECH. SYMPTOMS MAY BE
DELAYED. KIDNEY FAILURE MAY ALSO OCCUR.
CONTACT WITH SKIN OR EYES:
PROLONGED SKIN CONTACT CAN CAUSE MILD TO MODERATE IRRITATION, DEPENDING
ON THE DURATION AND CONCENTRATION OF EXPOSURE. SYMPTOMS OF SUCH
OVEREXPOSURE MAY CAUSE REDNESS AND IRRITATION. EYE CONTACT WITH THIS
PRODUCT MAY CAUSE IRRITATION, REDNESS.
HAZARDOUS MATERIAL IDENTIFICATION SYSTEM:
HEALTH HAZARD (BLUE) 2
FLAMMABILITY HAZARD (RED) 1
PHYSICAL HAZARD (ORANGE) 0
PROTECTIVE EQUIPMENT:
EYES: CHEMICAL GOGGLES
RESPIRATORY: SEE SECTION 8
HANDS: GLOVES
BODY: SEE SECTION 8
FOR ROUTINE INDUSTRIAL USE AND HANDLING APPLICATIONS
PART II WHAT SHOULD I DO IF A HAZARDOUS SITUATION OCCURS?
| 4. FIRST-AID MEASURES | |
CONTAMINATED INDIVIDUALS MUST BE TAKEN FOR MEDICAL ATTENTION. RESCUERS
SHOULD BE TAKEN FOR MEDICAL ATTENTION, IF NECESSARY. TAKE A COPY OF LABEL
AND MSDS TO HEALTH PROFESSIONAL WITH THE CONTAMINATED INDIVIDUAL.
SKIN EXPOSURE:
IF THIS PRODUCT CONTAMINATES THE SKIN, IMMEDIATELY BEGIN DECONTAMINATION
WITH RUNNING WATER AND SOAP. MINIMUM FLUSHING IS FOR 15 MINUTES. REMOVE
EXPOSED OR CONTAMINATED CLOTHING, TAKING CARE NOT TO CONTAMINATE EYES.
THE CONTAMINATED INDIVIDUAL MUST SEEK IMMEDIATE MEDICAL ATTENTION IF ANY
ADVERSE HEALTH EFFECT OCCURS.
EYE EXPOSURE:
IF THIS PRODUCT'S LIQUID OR VAPORS ENTER THE EYES, OPEN THE CONTAMINATED
INDIVIDUAL'S EYES WHILE UNDER GENTLY RUNNING WATER. USE SUFFICIENT FORCE
TO OPEN EYELIDS. HAVE THE CONTAMINATED INDIVIDUAL "ROLL" EYES. MINIMUM
FLUSHING IS FOR 15 MINUTES.
INHALATION:
IF VAPORS, MISTS, OR SPRAYS OF THIS PRODUCT ARE INHALED, REMOVE THE
CONTAMINATED INDIVIDUAL TO FRESH AIR. IF NECESSARY, USE ARTIFICIAL
RESPIRATION TO SUPPORT VITAL FUNCTIONS. REMOVE OR COVER GROSS CONTAMINATION
TO AVOID EXPOSURE TO RESCUERS. THE CONTAMINATED INDIVIDUAL SHOULD SEEK
IMMEDIATE MEDICAL ATTENTION.
INGESTION:
IF THIS PRODUCT IS SWALLOWED, CALL PHYSICIAN OR POISON CONTROL CENTER FOR
MOST CURRENT INFORMATION. IF PROFESSIONAL ADVICE IS NOT AVAILABLE, DO NOT
INDUCE VOMITING. HAVE VICTIM RINSE MOUTH WITH WATER OR DRINK SEVERAL
CUPFULS OF WATER, IF CONSCIOUS. NEVER INDUCE VOMITING OR GIVE A DILUENT
(E.G., WATER) TO SOMEONE WHO IS UNCONSCIOUS, HAVING CONVULSIONS, OR UNABLE
TO SWALLOW. IF VOMITING OCCURS, LEAN PATIENT FORWARD OR PLACE ON LEFT SIDE
(HEAD-DOWN POSITION, IF POSSIBLE) TO MAINTAIN AN OPEN AIRWAY AND PREVENT
ASPIRATION.
MEDICAL CONDITIONS AGGRAVATED BY EXPOSURE:
PREEXISTING RESPIRATORY PROBLEMS, DERMATITIS, OTHER SKIN DISORDERS, AND
CENTRAL NERVOUS DISORDERS MAY BE AGGRAVATED BY EXPOSURE TO THIS PRODUCT.
RECOMMENDATIONS TO PHYSICIANS:
TREAT SYMPTOMS AND ELIMINATE OVEREXPOSURE. PROVIDE OXYGEN, IF NECESSARY.
PULMONARY FUNCTION TESTS, CHEST X-RAYS, AND NERVOUS SYSTEM EVALUATIONS MAY
PROVE USEFUL.
| 5. FIRE-FIGHTING MEASURES | |
FLASH POINT: >241 DEG F
AUTOIGNITION TEMPERATURE:
>600 F DEG.
>315 C DEG.
FIRE EXTINGUISHING MATERIALS:
CARBON DIOXIDE. DRY CHEMICAL. ALCOHOL-TYPE FOAM. WATER.
UNUSUAL FIRE AND EXPLOSION HAZARDS: NONE
EXPLOSION SENSITIVITY TO MECHANICAL IMPACT: NOT SENSITIVE.
EXPLOSION SENSITIVITY TO STATIC DISCHARGE: NONE
SPECIAL FIRE-FIGHTING PROCEDURES:
A STEADY STEAM OF WATER DIRECTED INTO HOT, BURNING LIQUID MAY CAUSE
FROTHING AND SCATTERING OF OTHER BURNING MATERIAL. DO NOT SPRAY POOL FIRES
DIRECTLY.
NFPA RATING:
HEALTH 2
FLAMMABILITY 1
INSTABILITY 0
OTHER
SEE ORIGINAL MSDS FOR DEFINITION OF RATINGS
| 6. ACCIDENTAL RELEASE MEASURES | |
RELEASE RESPONSE:
CAN NOT BE MADE NONPOISONOUS. IN CASE OF A RELEASE, CLEAR THE AFFECTED
AREA AND PROTECT PEOPLE. SPILLS WILL BE SLIPPERY. ELIMINATE ALL SOURCES
OF IGNITION BEFORE CLEANUP BEGINS. USE NON-SPARKING TOOLS. APPROPRIATELY
TRAINED PERSONNEL IN PROPER PERSONAL PROTECTIVE EQUIPMENT, USING
PRE-PLANNED PROCEDURES SHOULD RESPOND TO UNCONTROLLED RELEASES. THE PROPER
PERSONAL PROTECTIVE EQUIPMENT FOR INCIDENTAL RELEASES (E.G., 32-OUNCE
CONTAINER) SHOULD BE RUBBER GLOVES AND GOGGLES. IN THE EVENT THAT CLEANUP
WILL GENERATE EXCESSIVE SPLASHES, A FACE-SHIELD, BOOTS, AND CHEMICAL
RESISTANT BODY PROTECTION SHOULD ALSO BE WORN. IN THE EVENT OF A
NON-INCIDENTAL RELEASE (E.G., SEVERAL 1-GALLON CONTAINERS RELEASED IN A
POORLY VENTILATED AREA), MINIMUM PERSONAL PROTECTIVE EQUIPMENT SHOULD BE
LEVEL B:
TRIPLE-GLOVES (RUBBER GLOVES AND NITRILE GLOVES OVER LATEX GLOVES),
CHEMICAL RESISTANT SUIT AND BOOTS, HARD HAT, AND SELF-CONTAINED BREATHING
APPARATUS. MONITOR AREA FOR COMBUSTIBLE VAPOR LEVELS. MONITORING MUST
INDICATE LESS THAN 10% LEL (REFER TO SECTION 5, FIRE-FIGHTING MEASURES)
BEFORE EMERGENCY RESPONSE PERSONNEL ARE PERMITTED IN THE AREA. MONITORING
MUST INDICATE THAT OXYGEN LEVELS ARE ABOVE 19.5% BEFORE ANYONE IS PERMITTED
IN THE AREA WITHOUT SELF-CONTAINED BREATHING APPARATUS. ABSORB SPILLED
LIQUID WITH ACTIVATED CARBON, POLYPADS, OR OTHER SUITABLE ABSORBENT
MATERIALS. DECONTAMINATE THE AREA THOROUGHLY. PLACE ALL SPILL RESIDUE IN
AN APPROPRIATE CONTAINER AND SEAL. DISPOSE OF IN ACCORDANCE WITH APPLICABLE
U.S. FEDERAL, STATE, OR LOCAL PROCEDURES, OR APPROPRIATE STANDARDS OF
CANADA OR EU MEMBER STATES (SEE SECTION 13, DISPOSAL CONSIDERATIONS).
PART III HOW CAN I PREVENT HAZARDOUS SITUATIONS FROM OCCURRING?
| 7. HANDLING AND STORAGE | |
WORK PRACTICES AND HYGIENE PRACTICES:
CANNOT BE MADE NONPOISONOUS. AS WITH ALL CHEMICALS, AVOID GETTING THIS
PRODUCT ON YOU OR IN YOU. WASH THOROUGHLY AFTER HANDLING THIS PRODUCT.
DO NOT EAT, DRINK, SMOKE, OR APPLY COSMETICS WHILE HANDLING THIS PRODUCT.
AVOID BREATHING VAPORS, MISTS, OR SPRAYS OF THIS PRODUCT. USE IN A
WELL-VENTILATED LOCATION. REMOVE CONTAMINATED CLOTHING IMMEDIATELY.
STORAGE AND HANDLING PRACTICES:
ALL EMPLOYEES WHO HANDLE THIS MATERIAL SHOULD BE TRAINED TO HANDLE IT
SAFELY. KEEP AWAY FROM HEAT, SPARKS, AND OTHER SOURCES OF IGNITION. KEEP
CONTAINER TIGHTLY CLOSED WHEN NOT IN USE. OPEN CONTAINERS SLOWLY ON A
STABLE SURFACE. USE NON-SPARKING TOOLS. BOND AND GROUND CONTAINERS DURING
TRANSFERS OF MATERIAL. IF THIS PRODUCT IS TRANSFERRED INTO ANOTHER
CONTAINER, ONLY USE PORTABLE CONTAINERS AND DISPENSING EQUIPMENT (FAUCET,
PUMP, DRIP CAN) APPROVED FOR FLAMMABLE LIQUIDS. STORE CONTAINERS IN A COOL,
DRY LOCATION, AWAY FROM DIRECT SUNLIGHT, SOURCES OF INTENSE HEAT, OR WHERE
FREEZING IS POSSIBLE. MATERIAL SHOULD BE STORED IN SECONDARY CONTAINERS OR
IN A DIKED AREA, AS APPROPRIATE. STORE AWAY FROM INCOMPATIBLE MATERIALS
(SEE SECTION 10, STABILITY AND REACTIVITY). CONTAINERS SHOULD BE SEPARATED
FROM OXIDIZING MATERIALS BY A MINIMUM DISTANCE OF 20 FT. OR BY A BARRIER OF
NON-COMBUSTIBLE MATERIAL AT LEAST 5 FT. HIGH HAVING A FIRE-RESISTANCE
RATING OF AT LEAST 0.5 HOURS. STORAGE AREAS SHOULD BE MADE OF FIRE
RESISTANT MATERIALS. POST WARNING AND "NO SMOKING" SIGNS IN STORAGE AND
USE AREAS, AS APPROPRIATE. HAVE APPROPRIATE EXTINGUISHING EQUIPMENT IN THE
STORAGE AREA (E.G., SPRINKLER SYSTEM, PORTABLE FIRE EXTINGUISHERS). INSPECT
ALL INCOMING CONTAINERS BEFORE STORAGE TO ENSURE CONTAINERS ARE PROPERLY
LABELED AND NOT DAMAGED. REFER TO NFPA 30, FLAMMABLE AND COMBUSTIBLE
LIQUIDS CODE, FOR ADDITIONAL INFORMATION ON STORAGE. EMPTY CONTAINERS MAY
CONTAIN RESIDUAL AMOUNTS OF THIS PRODUCT; THEREFORE, EMPTY CONTAINERS
SHOULD BE HANDLED WITH CARE. NEVER PERFORM ANY WELDING, CUTTING, SOLDERING,
DRILLING, OR OTHER HOT WORK ON AN EMPTY CONTAINER OR PIPING UNTIL ALL
LIQUID, VAPORS, AND RESIDUE HAVE BEEN CLEARED.
PROTECTIVE PRACTICES DURING MAINTENANCE OF CONTAMINATED EQUIPMENT:
FOLLOW PRACTICES INDICATED IN SECTION 6 (ACCIDENTAL RELEASE MEASURES).
MAKE CERTAIN THAT APPLICATION EQUIPMENT IS LOCKED AND TAGGED-OUT SAFELY,
IF NECESSARY. COLLECT ALL RINSATES AND DISPOSE OF ACCORDING TO APPLICABLE
U.S. FEDERAL, STATE, OR LOCAL PROCEDURES AND APPROPRIATE CANADIAN
STANDARDS, OR THOSE OF EU MEMBER STATES.
| 8. EXPOSURE CONTROLS - PERSONAL PROTECTION | |
VENTILATION AND ENGINEERING CONTROLS:
USE WITH ADEQUATE VENTILATION TO ENSURE EXPOSURE LEVELS ARE MAINTAINED
BELOW THE LIMITS PROVIDED BELOW, IF APPLICABLE. USE A NON-SPARKING,
GROUNDED, EXPLOSION-PROOF VENTILATION SYSTEM SEPARATE FROM OTHER EXHAUST
VENTILATION SYSTEMS. EXHAUST DIRECTLY TO THE OUTSIDE, TAKING NECESSARY
PRECAUTIONS FOR ENVIRONMENTAL PROTECTION. ENSURE EYEWASH/SAFETY SHOWER
STATIONS ARE AVAILABLE NEAR AREAS WHERE THIS PRODUCT IS USED.
EXPOSURE LIMITS/GUIDELINES:
CHEMICAL NAME CAS #
ETHYLENE GLYCOL 1,2-ETHANEDIOL 107-21-1
PROPRIETARY ORGANIC COMPOUNDS MIXTURE
CHEMICAL EXPOSURE LIMITS IN AIR OTHER
NAME ACGIH-TLVS OSHA-PELS NIOSH-RELS NIOSH AIHA WEELS
TWA STEL TWA STEL TWA STEL IDLH TWA STEL
PPM PPM PPM PPM PPM PPM PPM PPM PPM
ETHYLENE 50 NE NE NE 50 NE NE NE NE NE
GLYCOL 1,2-
ETHANEDIOL
PROPRIETARY NE NE NE NE NE NE NE NE NE NE
ORGANIC
COMPOUNDS
MIXTURE
NE: NOT ESTABLISHED.
P:
AVOID PROLONGED AND REPEATED SKIN CONTACT TO DIESEL FUELS WHICH CAN LEAD TO
DERMAL IRRITATION AND MAY BE ASSOCIATED WITH AN INCREASED RISK OF SKIN
CANCER.
SEE ORIGINAL MSDS FOR DEFINITIONS OF TERMS USED.
EYE PROTECTION:
SPLASH GOGGLES OR SAFETY GLASSES. FACE-SHIELDS SHOULD BE WORN IF OPERATIONS
WILL GENERATE SPLASHES OR SPRAYS. IF NECESSARY, REFER TO U.S. OSHA 29 CFR
1910.133, CANADIAN STANDARDS, OR THE EUROPEAN STANDARD EN166.
RESPIRATORY PROTECTION:
MAINTAIN AIRBORNE CONTAMINANT CONCENTRATIONS BELOW EXPOSURE LIMITS
LISTED ABOVE, IF APPLICABLE. IF RESPIRATORY PROTECTION IS NEEDED, USE ONLY
PROTECTION AUTHORIZED IN THE U.S. FEDERAL OSHA STANDARD (29 CFR 1910.134),
APPLICABLE U.S. STATE REGULATIONS, THE CANADIAN CSA STANDARD Z94.4-93, THE
EUROPEAN STANDARD EN149, OR STANDARDS OF EU MEMBER STATES. OXYGEN LEVELS
BELOW 19.5% ARE CONSIDERED IDLH BY OSHA. IN SUCH ATMOSPHERES, USE OF A
FULL-FACEPIECE PRESSURE/DEMAND SCBA OR A FULL FACEPIECE, SUPPLIED AIR
RESPIRATOR WITH AUXILIARY SELF-CONTAINED AIR SUPPLY IS REQUIRED UNDER
OSHAS RESPIRATORY PROTECTION STANDARD (1910.134-1998).
| 9. PHYSICAL AND CHEMICAL PROPERTIES | |
BOILING RANGE: 212 TO 387 DEG F
VAPOR DENSITY: HEAVIER THAN AIR
EVAPORATION RATE: SLOWER THAN ETHER
PERCENT VOLATILE BY VOLUME: NIL
WEIGHT PER GALLON: 8.81
| 10. STABILITY AND REACTIVITY | |
STABILITY: NORMALLY STABLE.
MATERIALS WITH WHICH SUBSTANCE IS INCOMPATIBLE: NONE
HAZARDOUS POLYMERIZATION: WILL NOT OCCUR.
CONDITIONS TO AVOID: NONE
PART IV IS THERE ANY OTHER USEFUL INFORMATION ABOUT THIS MATERIAL?
| 11. TOXICOLOGICAL INFORMATION | |
TOXICITY DATA:
CURRENTLY, THERE ARE NO TOXICOLOGICAL DATA AVAILABLE FOR COMPONENTS
IRRITANCY OF PRODUCT:
THIS PRODUCT CAN BE MILDLY IRRITATING TO EYES, SKIN, AND OTHER CONTAMINATED
TISSUE.
SENSITIZATION TO THE PRODUCT:
NO COMPONENT OF THIS PRODUCT IS KNOWN TO BE A HUMAN SKIN OR RESPIRATORY
SENSITIZER.
REPRODUCTIVE TOXICITY INFORMATION:
LISTED BELOW IS INFORMATION CONCERNING THE EFFECTS OF THIS PRODUCT AND ITS
COMPONENTS ON THE HUMAN REPRODUCTIVE SYSTEM.
MUTAGENICITY:
THE COMPONENTS OF THIS PRODUCT ARE NOT REPORTED TO CAUSE MUTAGENIC EFFECTS
IN HUMANS.
EMBRYOTOXCITY:
THE COMPONENTS OF THIS PRODUCT ARE NOT REPORTED TO CAUSE EMBRYOTOXIC
EFFECTS IN HUMANS. A MUTAGEN IS A CHEMICAL THAT CAUSES PERMANENT CHANGES
TO GENETIC MATERIAL (DNA) SUCH THAT THE CHANGES WILL PROPAGATE THROUGH
GENERATIONAL LINES. AN EMBRYOTOXIN IS A CHEMICAL THAT CAUSES DAMAGE TO
A DEVELOPING EMBRYO (I.E. WITHIN THE FIRST EIGHT WEEKS OF PREGNANCY IN
HUMANS), BUT THE DAMAGE DOES NOT PROPAGATE ACROSS GENERATIONAL LINES. A
TERATOGEN IS A CHEMICAL THAT CAUSES DAMAGE TO A DEVELOPING FETUS, BUT THE
DAMAGE DOES NOT PROPAGATE ACROSS GENERATIONAL LINES. A REPRODUCTIVE TOXIN
IS ANY SUBSTANCE THAT INTERFERES IN ANY WAY WITH THE REPRODUCTIVE PROCESS.
| 12. ECOLOGICAL INFORMATION | |
ALL WORK PRACTICES MUST BE AIMED AT ELIMINATING ENVIRONMENTAL
CONTAMINATION.
ENVIRONMENTAL STABILITY:
THE COMPONENTS OF THIS PRODUCT ARE RELATIVELY STABLE UNDER AMBIENT,
ENVIRONMENTAL CONDITIONS.
EFFECT OF MATERIAL ON PLANTS OR ANIMALS:
THIS PRODUCT MAY BE HARMFUL OR FATAL TO CONTAMINATED PLANT AND ANIMAL LIFE
(ESPECIALLY IF LARGE QUANTITIES ARE RELEASED).
EFFECT OF CHEMICAL ON AQUATIC LIFE:
THIS PRODUCT MAY BE HARMFUL OR FATAL TO CONTAMINATED AQUATIC PLANT AND
ANIMAL LIFE.
| 13. DISPOSAL CONSIDERATIONS | |
PREPARING WASTES FOR DISPOSAL:
WASTE DISPOSAL MUST BE IN ACCORDANCE WITH APPROPRIATE U.S. FEDERAL, STATE,
AND LOCAL REGULATIONS OR WITH REGULATIONS OF CANADA OR EU MEMBER STATES.
THIS PRODUCT, IF UNALTERED BY USE, MAY BE DISPOSED OF BY TREATMENT AT A
PERMITTED FACILITY OR AS ADVISED BY YOUR LOCAL HAZARDOUS WASTE REGULATORY
AUTHORITY.
EPA WASTE NUMBER:
WASTES OF THIS PRODUCT SHOULD BE TESTED TO SEE IF THEY ARE WASTES AS
DEFINED UNDER EPA CRITERIA FOR D001 LISTED WASTES (WASTE CHARACTERISTIC-
IGNITABITY).
| 14. TRANSPORTATION INFORMATION | |
DOT PROPER SHIPPING NAME: NOT REGULATED
SHIPPING SYMBOLS: NOT APPLICABLE
HAZARD CLASS: NOT APPLICABLE
UN NUMBER:
NOT REGULATED UNLESS SHIPPING CONTAINER HOLDS MORE THAN 10,539 POUNDS.
PACKING GROUP: NOT APPLICABLE
LABEL: NOT APPLICABLE
SPECIAL PROVISIONS (172.102): NOT APPLICABLE
| 15. REGULATORY INFORMATION | |
ADDITIONAL U.S. REGULATIONS:
U.S. SARA REPORTING REQUIREMENTS:
THE COMPONENTS OF THIS PRODUCT ARE NOT SUBJECT TO THE REPORTING
REQUIREMENTS OF SECTIONS 302, 304, AND 313 OF TITLE III OF THE SUPERFUND
AMENDMENTS AND REAUTHORIZATION ACT.
U.S. SARA THRESHOLD PLANNING QUANTITY:
THERE ARE NO SPECIFIC THRESHOLD PLANNING QUANTITIES FOR ANY COMPONENT
OF THIS PRODUCT. THE DEFAULT FEDERAL MSDS SUBMISSION AND INVENTORY
REQUIREMENT FILING THRESHOLD OF 10,000 LBS. (4,540 KG) THEREFORE APPLIES,
PER 40 CFR 370.20.
U.S. CERCLA REPORTABLE QUANTITY (RQ): NOT APPLICABLE.
U.S. TSCA INVENTORY STATUS:
THE COMPONENTS OF THIS PRODUCT ARE LISTED ON THE TSCA INVENTORY.
EPA REGULATIONS:
RCRA HAZARDOUS WASTE NUMBER AND RCRA HAZARDOUS WASTE CLASSIFICATION:
NOT CLASSIFIED AS A HAZARDOUS WASTE BY RCRA
CERCLA HAZARDOUS SUBSTANCE AND CERCLA REPORTABLE QUANTITY:
DOES NOT CONTAIN A CERCLA HAZARDOUS SUBSTANCE
SARA TOXIC CHEMICAL AND SARA EHS:
CONTAINS THE FOLLOWING LISTED IN TITLE III: ETHYLENE GLYCOL
SARA 313 INFORMATION:
SARA HAZARD CATEGORY:
IMMEDIATE HEALTH HAZARD
DELAYED HEALTH HAZARD
OSHA REGULATIONS:
OTHER:
CANADIAN WHMIS CLASSIFICATION:
CLASS D, DIVISION 2, SUBDIVISION B (A TOXIC MATERIAL CAUSING OTHER CHRONIC
EFFECTS)
| 16. OTHER INFORMATION | |
DATE OF PRINTING: MAY 10, 2013
THE INFORMATION CONTAINED HEREIN IS BASED ON DATA CONSIDERED ACCURATE.
HOWEVER, NO WARRANTY IS EXPRESSED OR IMPLIED REGARDING THE ACCURACY OF
THESE DATA OR THE RESULTS TO BE OBTAINED FROM THE USE THEREOF. ITW COOLING
SYSTEMS ASSUMES NO RESPONSIBILITY FOR INJURY TO THE VENDEE OR THIRD PERSONS
PROXIMATELY CAUSED BY THE MATERIAL IF REASONABLE SAFETY PROCEDURES ARE NOT
ADHERED TO AS STIPULATED IN THE DATA SHEET. ADDITIONALLY, STAR BRITE
ASSUMES NO RESPONSIBILITY FOR INJURY TO VENDEE OR THIRD PERSONS PROXIMATELY
CAUSED BY ABNORMAL USE OF THE MATERIAL EVEN IF REASONABLE SAFETY PROCEDURES
ARE FOLLOWED. FURTHERMORE, VENDEE ASSUMES THE RISK IN HIS USE OF THE
MATERIAL.