| Common Name: | HOT MELT GLUE |
| Manufacturer: | FPC |
| SDS Revision Date: | 7/13/2015 |
| SDS Format: | GHS-US |
| Item Number(s): | 20YV46, 20YV47, 20YV48, 20YV49, 20YV50, 20YV51, 20YV52, 20YV53, 20YV54, 20YV55, 20YV56, 20YV57, 20YV58, 35ZD88, 35ZD90, 35ZD91, 43GA56, 43GA74, 49AC30, 49AC31, 49AC32, 49AC33, 51UE46, 58PL61, 58PL62, 58PL63, 58PL64, 58PL65, 58PL66, 58PL67, 58PL68, 58PL69, 58PL70, 58PL71, 58PL72 |
| Manufacturer Model Number(s): |
SDS Table of Contents
Click the desired link below to jump directly to that section in the SDS.
FPC
SAFETY DATA SHEET
PREPARED TO:
U.S. OSHA, CMA, ANSI, CANADIAN WHMIS STANDARDS, AUSTRALIAN WORKSAFE,
JAPANESE INDUSTRIAL STANDARD JIS Z 7250:2000, AND EUROPEAN UNION STANDARDS
| 1. PRODUCT IDENTIFICATION |  |
TRADE NAME (AS LABELED): HOT MELT GLUE
PRODUCT NUMBERS:
500, 601, 701, 702, 707, 708, 711, 724, 725, 726, 727, 729, 735, 738, 739,
3100, 3120, 3130, 3140, 3145, 3150, 3170, 3190, 3210, 3220, 3240, 1130320,
AP5SB, BS-12, FM-15, FS-12, GS-15, HT-25, JS-12, RM-5H, RR-5, TL-15, WS-12,
ALL DT, GL, CO AND HL SERIES
CHEMICAL NAME: HOT MELT GLUE
PRODUCT USE: HOT MELT ADHESIVE
MANUFACTURER'S NAME: FPC CORPORATION
ADDRESS:
355 HOLLOW HILL DRIVE
WAUCONDA, IL 60084
BUSINESS PHONE: 847-487-4583
FAX NUMBER: 847-487-0174
DATE OF PREPARATION: JULY 13, 2015
| 2. HAZARD IDENTIFICATION | |
EMERGENCY OVERVIEW:
PRODUCT DESCRIPTION:
THIS PRODUCT IS A SOLID IN VARIOUS COLORS, WITH NO ODOR.
HEALTH HAZARDS:
THIS PRODUCT AS SUPPLIED IS NOT EXPECTED TO CAUSE ADVERSE HEALTH EFFECTS.
FLAMMABILITY HAZARDS:
THIS PRODUCT IS COMBUSTIBLE ABOVE FLASH POINT >450 DEG. F (>232 DEG. C) IF
EXPOSED TO IGNITION SOURCE.
REACTIVITY HAZARDS: NONE KNOWN.
ENVIRONMENTAL HAZARDS:
THIS MATERIAL IS NOT EXPECTED TO BE AN ENVIRONMENTAL HAZARD
EMERGENCY CONSIDERATIONS:
EMERGENCY RESPONDERS MUST WEAR THE PROPER PERSONAL PROTECTIVE EQUIPMENT
(AND HAVE APPROPRIATE FIRE-SUPPRESSION EQUIPMENT) SUITABLE FOR THE
SITUATION TO WHICH THEY ARE RESPONDING.
US DOT SYMBOLS: NON-REGULATED MATERIAL
CANADA (WHMIS) SYMBOLS: NOT CONTROLLED
EUROPEAN AND (GHS) HAZARD SYMBOLS: NONE
SIGNAL WORD: NONE
THIS PRODUCT AS SUPPLIED DOES NOT MEET THE DEFINITION OF A HAZARD CLASS, AS
DEFINED BY 29 CFR 1910.1200 AND THE EUROPEAN UNION COUNCIL DIRECTIVES
67/548/EEC AND SUBSEQUENT DIRECTIVES IN 76/768/EEC. THIS PRODUCT IS BEING
EVALUATED AS AN ARTICLE.
THIS PRODUCT AS SUPPLIED IS CLASSIFIED AS AN "ARTICLE" ACCORDING TO TITLE
29 OF THE CODE OF FEDERAL REGULATIONS, OSHA PART 1910.1200.
"ARTICLE MEANS A MANUFACTURED ITEM OTHER THAN A FLUID OR PARTICLE, WHICH IS
FORMED TO A SPECIFIC SHAPE OR DESIGN DURING MANUFACTURE WHICH HAS END USE
FUNCTION DEPENDENT IN WHOLE OR IN PART UPON ITS SHAPE OR DESIGN DURING END
USE, AND WHICH UNDER NORMAL CONDITIONS OF USE DOES NOT RELEASE MORE THAN
VERY SMALL QUANTITIES OR TRACE AMOUNTS OF A HAZARDOUS CHEMICAL, AND DOES
NOT POSE A PHYSICAL HAZARD OR HEALTH RISK TO EMPLOYEES."
THIS PRODUCT AS SUPPLIED IS ODORLESS, STABLE, AND POSES NO IMMEDIATE HAZARD
TO HEALTH.
EU LABELING AND CLASSIFICATION:
CLASSIFICATION OF THE SUBSTANCE OR MIXTURE ACCORDING TO REGULATION (EC)
NO1272/2008 ANNEX VI:
CAS# 24937-78-8 IS NOT LISTED IN ESIS
CAS# 69430-35-9 IS NOT LISTED IN ESIS
EC# 232-479-9 THIS SUBSTANCE IS NOT CLASSIFIED IN THE ANNEX VI OF DIRECTIVE
67/548/EEC
CAS# 68441-37-2 IS NOT LISTED IN ESIS
CAS# 9002-88-4 IS NOT LISTED IN ESIS
COMPONENT(S) DETERMINING HAZARD: ALL INGREDIENTS
GHS HAZARD CLASSIFICATION(S): NONE KNOWN
HAZARD STATEMENT(S): NONE KNOWN
PRECAUTIONARY STATEMENT(S): NONE KNOWN
HEALTH HAZARDS OR RISKS FROM EXPOSURE:
ACUTE:
THIS PRODUCT AS SUPPLIED IS NOT EXPECTED TO CAUSE ADVERSE HEALTH EFFECTS
WHEN USED AS INTENDED. INGESTION OF THIS PRODUCT IS NOT A LIKELY ROUTE OF
ENTRY. MAY CAUSE GASTROINTESTINAL IRRITATION IF SWALLOWED. NOT EXPECTED TO
CAUSE RESPIRATORY IRRITATION.
CHRONIC: NONE KNOWN
TARGET ORGANS:
ACUTE: NONE KNOWN
CHRONIC: NONE KNOWN
| 3. COMPOSITION AND INFORMATION ON INGREDIENTS | |
HAZARDOUS CAS # EINECS # ICSC # WT % GHS
INGREDIENTS CLASSIFICATION(S)
ETHYLENE VINYL 24937-78-8 NOT NOT 55 - 75% NOT CLASSIFIED
COPOLYMER LISTED LISTED
IN
ESIS
RESIN 69430-35-9 NOT NOT 0 - 45% NOT CLASSIFIED
LISTED LISTED
IN
ESIS
RESIN ACIDS 8050-26-8 232-479-9 NOT 0 - 45% NOT CLASSIFIED
AND ROSIN LISTED
ACIDS, ESTERS
WITH PENTAERY-
THRITOL
HYDROCARBON 68441-37-2 NOT NOT 0 - 45% NOT CLASSIFIED
RESIN LISTED LISTED
IN
ESIS
POLYETHYLENE 9002-88-4 NOT NOT 0 - 10% NOT CLASSIFIED
WAX LISTED LISTED
IN
ESIS
BALANCE OF OTHER COMPONENTS. EACH OF THE OTHER COMPONENTS IS PRESENT IN
LESS THAN 1 PERCENT CONCENTRATION (0.1% CONCENTRATION FOR POTENTIAL
CARCINOGENS, REPRODUCTIVE TOXINS, RESPIRATORY TRACT SENSITIZERS, AND
MUTAGENS)
NOTE:
THIS PRODUCT HAS BEEN CLASSIFIED IN ACCORDANCE WITH THE HAZARD CRITERIA OF
THE CPR AND THE SDS CONTAINS ALL THE INFORMATION REQUIRED BY THE CPR, EU
DIRECTIVES AND THE JAPANESE INDUSTRIAL STANDARD JIS Z 7250: 2000. THIS
MATERIAL IS CLASSIFIED AS NON-HAZARDOUS UNDER OSHA REGULATIONS 29 CFR
1910.1200.
| 4. FIRST-AID MEASURES | |
CONTAMINATED INDIVIDUALS OF CHEMICAL EXPOSURE MUST BE TAKEN FOR MEDICAL
ATTENTION IF ANY ADVERSE EFFECT OCCURS. RESCUERS SHOULD BE TAKEN FOR
MEDICAL ATTENTION, IF NECESSARY. TAKE COPY OF LABEL AND MSDS TO HEALTH
PROFESSIONAL WITH CONTAMINATED INDIVIDUAL.
SKIN CONTACT:
EXPOSURE TO NON-MOLTEN PRODUCT IS NOT EXPECTED TO CAUSE ADVERSE EFFECTS.
WASH HANDS AFTER HANDLING. IF HOT MOLTEN PRODUCT CONTACTS SKIN, COOL UNDER
RUNNING WATER. DO NOT REMOVE SOLIDIFIED PRODUCT. THE CONTAMINATED
INDIVIDUAL SHOULD SEEK MEDICAL ATTENTION.
EYE CONTACT:
EXPOSURE TO NON-MOLTEN PRODUCT IS NOT EXPECTED TO CAUSE ADVERSE EFFECTS. IF
HOT PRODUCT ENTERS THE EYES, FLUSH WITH WATER FOR AT LEAST 15 MINUTES.
CONTAMINATED INDIVIDUAL SHOULD SEEK MEDICAL ATTENTION IMMEDIATELY.
INHALATION:
IF BREATHING BECOMES DIFFICULT REMOVE CONTAMINATED INDIVIDUAL TO FRESH AIR.
SEEK MEDICAL ATTENTION IF BREATHING DIFFICULTIES CONTINUES.
INGESTION:
ROUTINE USE OF THIS PRODUCT IS NOT EXPECTED TO CAUSE ANY SITUATION WHICH
COULD LEAD TO INGESTION. IF THIS PRODUCT IS SWALLOWED, CALL PHYSICIAN OR
POISON CONTROL CENTER FOR MOST CURRENT INFORMATION.
IF PROFESSIONAL ADVICE IS NOT AVAILABLE, DO NOT INDUCE VOMITING. NEVER
INDUCE VOMITING OR GIVE DILUENTS (MILK OR WATER) TO SOMEONE WHO IS
UNCONSCIOUS, HAVING CONVULSIONS, OR UNABLE TO SWALLOW.
MEDICAL CONDITIONS AGGRAVATED BY EXPOSURE: NONE KNOWN.
RECOMMENDATIONS TO PHYSICIANS: TREAT SYMPTOMS AND ELIMINATE OVEREXPOSURE.
| 5. FIRE-FIGHTING MEASURES | |
FLASH POINT: >450 DEG. F (>232 DEG. C)
AUTOIGNITION TEMPERATURE: NOT ESTABLISHED
FLAMMABLE LIMITS (IN AIR BY VOLUME, %):
LOWER: NA
UPPER: NA
FIRE EXTINGUISHING MATERIALS:
USE FIRE EXTINGUISHING MATERIALS APPROPRIATE FOR SURROUNDING FIRE INCLUDING
WATER SPRAY (FOR COOLING), DRY EXTINGUISHING MEDIA, CARBON DIOXIDE, FOAM. A
SOLID STREAM OF WATER MAY SCATTER MOLTEN PRODUCT.
UNUSUAL FIRE AND EXPLOSION HAZARDS:
THIS PRODUCT HAS NO UNUSUAL FIRE OR EXPLOSION HAZARDS. DO NOT USE WATER ON
MOLTEN ADHESIVE TO AVOID SPLATTERING AND SPREADING THE FIRE.
EXPLOSION SENSITIVITY TO MECHANICAL IMPACT: NOT SENSITIVE
EXPLOSION SENSITIVITY TO STATIC DISCHARGE: NOT SENSITIVE
SPECIAL FIRE-FIGHTING PROCEDURES:
INCIPIENT FIRE RESPONDERS SHOULD WEAR EYE PROTECTION. STRUCTURAL
FIREFIGHTERS MUST WEAR SELF-CONTAINED BREATHING APPARATUS AND FULL
PROTECTIVE EQUIPMENT. ISOLATE MATERIALS NOT YET INVOLVED IN THE FIRE AND
PROTECT PERSONNEL. MOVE CONTAINERS FROM FIRE AREA IF THIS CAN BE DONE
WITHOUT RISK; OTHERWISE, COOL WITH CAREFULLY APPLIED WATER SPRAY. IF
POSSIBLE, PREVENT RUNOFF WATER FROM ENTERING STORM DRAINS, BODIES OF
WATER, OR OTHER ENVIRONMENTALLY SENSITIVE AREAS.
NFPA RATING:
HEALTH 0
FLAMMABILITY 1
REACTIVITY 0
OTHER
HAZARD SCALE:
0 = MINIMAL
1 = SLIGHT
2 = MODERATE
3 = SERIOUS
4 = SEVERE
| 6. ACCIDENTAL RELEASE MEASURES | |
SPILL AND LEAK RESPONSE: COLLECT AND CONTAIN FOR SALVAGE OR DISPOSAL.
DISPOSAL:
DISPOSE OF IN ACCORDANCE WITH APPLICABLE FEDERAL, STATE, AND LOCAL
PROCEDURES (SEE SECTION 13, DISPOSAL CONSIDERATIONS).
| 7. HANDLING AND STORAGE | |
WORK PRACTICES AND HYGIENE PRACTICES: USE GOOD HYGIENE PRACTICES.
STORAGE AND HANDLING PRACTICES:
STORE IN A COOL DRY LOCATION. PROTECT FROM PHYSICAL DAMAGE.
| 8. EXPOSURE CONTROLS - PERSONAL PROTECTION | |
VENTILATION AND ENGINEERING CONTROLS:
USE WITH ADEQUATE VENTILATION TO ENSURE EXPOSURE LEVELS ARE MAINTAINED
BELOW THE LIMITS PROVIDED BELOW. USE LOCAL EXHAUST VENTILATION, AND PROCESS
ENCLOSURE IF NECESSARY.
EXPOSURE LIMITS/GUIDELINES:
COMPONENT NAME CAS# ACGIH-TLV'S OSHA PEL'S NIOSH-TLV'S OTHER
ETHYLENE VINYL 24937-78-8 NOT LISTED NOT LISTED NOT LISTED NONE
COPOLYMER
RESIN 69430-35-9 NOT LISTED NOT LISTED NOT LISTED NONE
RESIN ACIDS AND 8050-26-8 NOT LISTED NOT LISTED NOT LISTED NONE
ROSIN ACIDS,
ESTERS WITH
PENTAERYTHRITOL
HYDROCARBON 68441-37-2 NOT LISTED NOT LISTED NOT LISTED NONE
RESIN
POLYETHYLENE 9002-88-4 NOT LISTED NOT LISTED NOT LISTED NONE
WAX
CURRENTLY, INTERNATIONAL EXPOSURE LIMITS ARE ESTABLISHED FOR THE COMPONENTS
OF THIS PRODUCT. PLEASE CHECK WITH COMPETENT AUTHORITY IN EACH COUNTRY FOR
THE MOST RECENT LIMITS IN PLACE.
THE FOLLOWING INFORMATION ON APPROPRIATE PERSONAL PROTECTIVE EQUIPMENT IS
PROVIDED TO ASSIST EMPLOYERS IN COMPLYING WITH OSHA REGULATIONS FOUND IN 29
CFR SUBPART I (BEGINNING AT 1910.132) OR EQUIVALENT STANDARD OF CANADA, OR
STANDARDS OF EU MEMBER STATES (INCLUDING EN 149 FOR RESPIRATORY PPE, AND EN
166 FOR FACE/EYE PROTECTION), AND THOSE OF JAPAN. PLEASE REFERENCE
APPLICABLE REGULATIONS AND STANDARDS FOR RELEVANT DETAILS.
RESPIRATORY PROTECTION:
NOT REQUIRED FOR PRODUCT AS SUPPLIED. WHEN THERMAL PROCESSING FUMES ARE
GENERATED AND VENTILATION IS NOT SUFFICIENT TO EFFECTIVELY REMOVE THEM
APPROPRIATE APPROVED RESPIRATORY PROTECTION MUST BE PROVIDED. HEATED
PRODUCT WILL EMIT VAPORS AND EXPOSED WORKERS MAY NEED TO USE A NIOSH
APPROVED, ORGANIC VAPOR CANISTER TYPE RESPIRATOR. IF NECESSARY, USE ONLY
RESPIRATORY PROTECTION AUTHORIZED IN THE U.S. FEDERAL OSHA RESPIRATORY
PROTECTION STANDARD (29 CFR 1910.134), EQUIVALENT U.S. STATE STANDARDS,
CANADIAN CSA STANDARD Z94.4-93, THE EUROPEAN STANDARD EN149, OR EU MEMBER
STATES. OXYGEN LEVELS BELOW 19.5% ARE CONSIDERED IDLH BY OSHA. IN SUCH
ATMOSPHERES, USE OF A FULL-FACEPIECE PRESSURE/DEMAND SCBA OR A FULL
FACEPIECE, SUPPLIED AIR RESPIRATOR WITH AUXILIARY SELF-CONTAINED AIR
SUPPLY IS REQUIRED UNDER U.S. FEDERAL OSHA'S RESPIRATORY PROTECTION
STANDARD (1910.134-1998) OR THE REGULATIONS OF VARIOUS U.S. STATES, CANADA,
EU MEMBER STATES, OR THOSE OF JAPAN. AIR-PURIFYING RESPIRATORS WITH
DUST/MIST/FUME FILTERS ARE RECOMMENDED IF OPERATIONS MAY PRODUCE MISTS OR
SPRAYS FROM THIS PRODUCT.
EYE PROTECTION:
NOT REQUIRED FOR PRODUCT AS SUPPLIED. WEAR CHEMICAL GOGGLES, FACE SHIELD IF
HANDLING MOLTEN MATERIAL. IF NECESSARY, REFER TO U.S. OSHA 29 CFR 1910.133,
CANADIAN STANDARDS, AND THE EUROPEAN STANDARD EN166, AUSTRALIAN STANDARDS,
OR RELEVANT JAPANESE STANDARDS.
HAND PROTECTION:
NOT REQUIRED FOR PRODUCT AS SUPPLIED. WEAR THERMAL INSULATING GLOVES TO
PROTECT FROM THERMAL BURNS. IF NECESSARY, REFER TO U.S. OSHA 29 CFR
1910.138, THE EUROPEAN STANDARD DIN EN 374, THE APPROPRIATE STANDARDS OF
CANADA, AUSTRALIAN STANDARDS, OR RELEVANT JAPANESE STANDARDS.
BODY PROTECTION:
NOT REQUIRED FOR PRODUCT AS SUPPLIED. WHEN THERMAL PROCESSING WEAR WORK
CLOTHING SUFFICIENT TO PREVENT SKIN CONTACT. IF NECESSARY, REFER TO
APPROPRIATE STANDARDS OF CANADA, OR APPROPRIATE STANDARDS OF THE EU,
AUSTRALIAN STANDARDS, OR RELEVANT JAPANESE STANDARDS.
| 9. PHYSICAL AND CHEMICAL PROPERTIES | |
SOFTENING POINT: 190 DEG. F (88 DEG. C)
EVAPORATION RATE (N-BUAC=1): NOT APPLICABLE
SPECIFIC GRAVITY @ 20 DEG. C: 0.918 - 0.960 (WATER=1)
SOLUBILITY IN WATER: NON SOLUBLE
VAPOR PRESSURE, MMHg @ 20 DEG. C (68 DEG. F): NA
PH: NA
ODOR THRESHOLD: NO ODOR
APPEARANCE, ODOR AND COLOR:
THIS PRODUCT IS A SOLID IN VARIOUS COLORS, WITH NO ODOR.
| 10. STABILITY AND REACTIVITY | |
STABILITY: STABLE.
DECOMPOSITION PRODUCTS:
THERMAL DEGRADATION PRODUCES CARBON MONOXIDE, CARBON DIOXIDE AND/OR LOW
MOLECULAR WEIGHT HYDROCARBONS.
MATERIALS WITH WHICH SUBSTANCE IS INCOMPATIBLE:
THE PRODUCT MAY REACT TO STRONG ACIDS, BASES AND OXIDIZING AGENTS.
POSSIBILITY OF HAZARDOUS REACTIONS: WILL NOT OCCUR.
CONDITIONS TO AVOID:
AVOID EXCESSIVE OVERHEATING. DO NOT ADD WATER OR OTHER VOLATILE MATERIAL TO
MOLTEN ADHESIVE.
| 11. TOXICOLOGICAL INFORMATION | |
TOXICITY DATA: NO LD50 DATA AVAILABLE FOR THIS PRODUCT
SUSPECTED CANCER AGENT:
THE COMPONENTS OF THIS PRODUCT ARE NOT LISTED BY AGENCIES TRACKING THE
CARCINOGENIC POTENTIAL OF CHEMICAL COMPOUNDS AS FOLLOWS:
CARCINOGENITY:
NTP REGULATED: NO
IARC REGULATED: NO
OSHA REGULATED: NO
IRRITANCY OF PRODUCT: THIS PRODUCT CAN CAUSE SKIN AND EYE IRRITATION.
SENSITIZATION TO THE PRODUCT:
THESE PRODUCTS ARE NOT KNOWN TO CAUSE HUMAN SKIN OR RESPIRATORY
SENSITIZATION.
REPRODUCTIVE TOXICITY INFORMATION:
LISTED BELOW IS INFORMATION CONCERNING THE EFFECTS OF THIS PRODUCT AND ITS
COMPONENTS ON THE HUMAN REPRODUCTIVE SYSTEM.
MUTAGENICITY:
THE COMPONENTS OF THIS PRODUCT ARE NOT REPORTED TO PRODUCE MUTAGENIC
EFFECTS IN HUMANS.
EMBRYOTOXICITY:
THE COMPONENTS OF THIS PRODUCT ARE NOT REPORTED TO PRODUCE EMBRYOTOXIC
EFFECTS IN HUMANS.
TERATOGENICITY:
THE COMPONENTS OF THIS PRODUCT ARE NOT REPORTED TO PRODUCE TERATOGENICITY
EFFECTS IN HUMANS.
REPRODUCTIVE TOXICITY:
THE COMPONENTS OF THIS PRODUCT ARE NOT REPORTED TO PRODUCE REPRODUCTIVE
EFFECTS IN HUMANS.
| 12. ECOLOGICAL INFORMATION | |
ALL WORK PRACTICES MUST BE AIMED AT ELIMINATING ENVIRONMENTAL
CONTAMINATION.
MOBILITY IN SOIL: THESE PRODUCTS HAVE NOT BEEN TESTED FOR MOBILITY IN SOIL.
PERSISTENCE/DEGRADABILITY:
THESE PRODUCTS HAVE NOT BEEN TESTED FOR PERSISTENCE OR BIODEGRADABILITY.
THE COMPONENTS MAY SLOWLY DEGRADE IN THE ENVIRONMENT AND FORM A VARIETY OF
ORGANIC AND INORGANIC MATERIALS; HOWEVER, NO SPECIFIC INFORMATION IS KNOWN.
ENVIRONMENTAL STABILITY:
THESE PRODUCTS HAVE NOT BEEN TESTED FOR ENVIRONMENTAL STABILITY.
BIOACCUMULATION/ACCUMULATION:
THESE PRODUCTS HAVE NOT BEEN TESTED FOR BIO-ACCUMULATION POTENTIAL.
| 13. DISPOSAL CONSIDERATIONS | |
PREPARING WASTES FOR DISPOSAL:
WASTE DISPOSAL MUST BE IN ACCORDANCE WITH APPROPRIATE U.S. FEDERAL, STATE,
AND LOCAL REGULATIONS, THOSE OF CANADA, AUSTRALIA, EU MEMBER STATES AND
JAPAN.
| 14. TRANSPORTATION INFORMATION | |
US DOT, IATA, IMO, ADR:
U.S. DEPARTMENT OF TRANSPORTATION (DOT) SHIPPING REGULATIONS:
THIS PRODUCT IS NOT CLASSIFIED AS DANGEROUS GOODS, PER U.S. DOT
REGULATIONS, UNDER 49 CFR 172.101. NON-REGULATED
TRANSPORT CANADA, TRANSPORTATION OF DANGEROUS GOODS REGULATIONS:
THESE PRODUCTS ARE NOT CLASSIFIED AS DANGEROUS GOODS, PER REGULATIONS OF
TRANSPORT CANADA.
INTERNATIONAL AIR TRANSPORT ASSOCIATION (IATA):
THESE PRODUCTS ARE NOT CLASSIFIED AS DANGEROUS GOODS, BY RULES OF IATA:
INTERNATIONAL MARITIME ORGANIZATION (IMO) DESIGNATION:
THESE PRODUCTS ARE NOT CLASSIFIED AS DANGEROUS GOODS BY THE INTERNATIONAL
MARITIME ORGANIZATION.
EUROPEAN AGREEMENT CONCERNING THE INTERNATIONAL CARRIAGE OF DANGEROUS GOODS
BY ROAD (ADR):
THESE PRODUCTS ARE NOT CLASSIFIED BY THE UNITED NATIONS ECONOMIC COMMISSION
FOR EUROPE TO BE DANGEROUS GOODS
| 15. REGULATORY INFORMATION | |
UNITED STATES REGULATIONS:
U.S. SARA REPORTING REQUIREMENTS:
THE COMPONENTS OF THESE PRODUCTS ARE NOT SUBJECT TO THE REPORTING
REQUIREMENTS OF SECTIONS 302, 304, AND 313 OF TITLE III OF THE SUPERFUND
AMENDMENTS AND REAUTHORIZATION ACT.
U.S. SARA THRESHOLD PLANNING QUANTITY:
THERE ARE NO SPECIFIC THRESHOLD PLANNING QUANTITIES FOR ANY COMPONENT OF
THESE PRODUCTS. THE DEFAULT FEDERAL MSDS SUBMISSION AND INVENTORY
REQUIREMENT FILING THRESHOLD OF 10,000 LB (4,540 KG) THEREFORE APPLIES, PER
40 CFR 370.20.
U.S. CERCLA REPORTABLE QUANTITY (RQ): NONE.
U.S. TSCA INVENTORY STATUS:
THE COMPONENTS OF THESE PRODUCTS ARE LISTED IN THE TSCA INVENTORY.
CALIFORNIA SAFE DRINKING WATER AND TOXIC ENFORCEMENT ACT (PROPOSITION 65):
THIS PRODUCT DOES NOT CONTAIN ANY COMPONENT ABOVE THE 0.1% LEVEL WHICH IS
LISTED AS A CALIFORNIA PROPOSITION 65 CHEMICAL.
CANADIAN REGULATIONS:
CANADIAN DSL/NDSL INVENTORY STATUS:
THE COMPONENTS OF THIS PRODUCT ARE ON THE DSL INVENTORY, OR ARE EXEMPTED
FROM LISTING.
CANADIAN ENVIRONMENTAL PROTECTION ACT (CEPA) PRIORITIES SUBSTANCES LISTS:
NO COMPONENT OF THIS PRODUCT IS ON THE CEPA FIRST PRIORITIES SUBSTANCE
LISTS.
CANADIAN WHMIS CLASSIFICATION AND SYMBOLS: COMPLIES WITH WHMIS 2015
EUROPEAN ECONOMIC COMMUNITY INFORMATION: SEE SECTION 2 FOR DETAILS
AUSTRALIAN INFORMATION FOR PRODUCT:
AUSTRALIAN INVENTORY OF CHEMICAL SUBSTANCES (AICS) STATUS:
THE COMPONENTS OF THIS PRODUCT ARE LISTED ON THE AICS OR ARE EXEMPT.
STANDARD FOR THE UNIFORM SCHEDULING OF DRUGS AND POISONS: NOT APPLICABLE.
JAPANESE INFORMATION FOR PRODUCT:
JAPANESE MINISTER OF INTERNATIONAL TRADE AND INDUSTRY (MITI) STATUS:
THE COMPONENTS OF THIS PRODUCT ARE NOT LISTED AS CLASS I SPECIFIED CHEMICAL
SUBSTANCES, CLASS II SPECIFIED CHEMICAL SUBSTANCES, OR DESIGNATED CHEMICAL
SUBSTANCES BY THE JAPANESE MITI.
INTERNATIONAL CHEMICAL INVENTORIES:
LISTING OF THE COMPONENTS ON INDIVIDUAL COUNTRY CHEMICAL INVENTORIES IS AS
FOLLOWS:
ASIA-PAC: LISTED OR EXEMPT
AUSTRALIAN INVENTORY OF CHEMICAL SUBSTANCES (AICS): LISTED OR EXEMPT
KOREAN EXISTING CHEMICALS LIST (ECL): LISTED OR EXEMPT
JAPANESE EXISTING NATIONAL INVENTORY OF CHEMICAL SUBSTANCES (ENCS):
LISTED OR EXEMPT
PHILIPPINES INVENTORY IF CHEMICALS AND CHEMICAL SUBSTANCES (PICCS):
LISTED OR EXEMPT
SWISS GIFTLISTE LIST OF TOXIC SUBSTANCES: LISTED OR EXEMPT
U.S. TSCA: LISTED OR EXEMPT
| 16. OTHER INFORMATION | |
PREPARED BY: PAUL EIGBRETT
DATE OF PRINTING: JULY 13, 2015
GHS MSDS COMPLIANCE PLUS
ALTHOUGH THE INFORMATION SET FORTH HEREIN IS PRESENTED IN GOOD FAITH AND
BELIEVED TO BE CORRECT AS OF THE DATE OF ISSUANCE, IT HAS BEEN FURNISHED BY
OUR SUPPLIERS; CONSEQUENTLY, FPC CORPORATION MAKES NO REPRESENTATIONS OR
WARRANTIES, EXPRESS OR IMPLIED, WITH RESPECT TO INFORMATION HEREIN
PRESENTED. THE INFORMATION SET FORTH HEREIN IS SUPPLIED UPON THE CONDITION
THAT THE PERSONS RECEIVING SAME WILL MAKE THEIR OWN DETERMINATION AS TO
SUITABILITY FOR THEIR PURPOSES PRIOR TO USE AND RELATES ONLY TO THE
SPECIFIC PRODUCT DESCRIBED AND NOT TO SUCH PRODUCT IN COMBINATION WITH ANY
OTHER PRODUCT. IN NO EVENT WILL INTERNATIONAL CELLULOSE CORPORATION BE
RESPONSIBLE FOR DAMAGES OF ANY NATURE RESULTING FROM THE USE OF OR RELIANCE
UPON THIS INFORMATION.