| Common Name: | SUREWELD 6011 - 3/32 X 14IN SUREWELD 6011 ELECTRODE 5LB |
| Manufacturer: | ESAB SWEDEN |
| SDS Revision Date: | 1/6/2021 |
| SDS Format: | GHS-EU |
| Item Number(s): | 400G33 |
| Manufacturer Model Number(s): |
SDS Table of Contents
Click the desired link below to jump directly to that section in the SDS.
ESAB(R*)
SAFETY DATA SHEET
THIS SAFETY DATA SHEET COMPLIES WITH ANNEX II OF 830/2015 AMENDING EC NO.
1907/2006, COMMISION REGULATION (EU) 2019/521
AMENDING CLP DIRECTIVE 1272/2008, ALSO IN ACCORDANCE WITH ISO 11014-1 AND
ANSI Z400.1
ISSUED: 2021-01-06
SUREWELD 6011 - 3/32 X 14IN SUREWELD 6011 ELECTRODE 5LB
| SECTION 1: IDENTIFICATION OF THE SUBSTANCE/MIXTURE |  |
AND OF THE COMPANY/UNDERTAKING
1.1. PRODUCT IDENTIFIER:
TRADE NAME: SUREWELD 6011 - 3/32 X 14IN SUREWELD 6011 ELECTRODE 5LB
1.2. RELEVANT IDENTIFIED USES OF THE SUBSTANCE OR MIXTURE AND USES ADVISED
AGAINST:
USE: ARC WELDING
1.3. DETAILS OF THE SUPPLIER OF THE SAFETY DATA SHEET:
SDS CREATED BY: TDS TEAM
SUPPLIER: ESAB AB
STREET ADDRESS:
BOX 8004
402 77 GOTEBORG
SWEDEN
TELEPHONE: +46 31 509000
EMAIL: SDSREQUEST@ESAB.COM
WEB SITE: WWW.ESAB.COM
1.4. EMERGENCY TELEPHONE NUMBER:
EMERGENCY PHONE NUMBER: 44-870-8200418 AND 44-2038073798
AVAILABLE OUTSIDE OFFICE HOURS: YES
OTHER:
OTHER:
CLASSIFICATION(S): AWS A5.1
| SECTION 2: HAZARDS IDENTIFICATION | |
2.1. CLASSIFICATION OF THE SUBSTANCE OR MIXTURE:
THE PRODUCT IS NOT CLASSIFIED
2.2. LABEL ELEMENTS:
THE PRODUCT DOES NOT REQUIRE LABELLING IN ACCORDANCE WITH CLP REGULATION
(EC) NO 1272/2008.
2.3. OTHER HAZARDS:
OTHER HAZARDS:
THIS PRODUCT CONTAINS TITANIUM DIOXIDE WHICH IS POSSIBLY CARCINOGENIC.
THIS PRODUCT CONTAINS QUARTZ, BUT NORMALLY NOT IN AN INHALABLE FRACTION.
QUARTZ CAN CAUSE SILICOSIS AND MAY CAUSE CANCER AVOID EYE CONTACT OR
INHALATION OF DUST FROM THE PRODUCT.
SKIN CONTACT IS NORMALLY NO HAZARD BUT SHOULD BE AVOIDED TO PREVENT
POSSIBLE ALLERGIC REACTIONS. PERSONS WITH A PACEMAKER SHOULD NOT GO NEAR
WELDING OR CUTTING OPERATIONS UNTIL THEY HAVE CONSULTED THEIR DOCTOR AND
OBTAINED INFORMATION FROM THE MANUFACTURER OF THE DEVICE.
WHEN THIS PRODUCT IS USED IN A WELDING PROCESS, THE MOST IMPORTANT HAZARDS
ARE WELDING FUMES, HEAT, RADIATION AND ELECTRIC SHOCK.
FUMES:
OVEREXPOSURE TO WELDING FUMES MAY RESULT IN SYMPTOMS LIKE METAL FUME FEVER,
DIZZINESS, NAUSEA, DRYNESS OR IRRITATION OF THE NOSE, THROAT OR EYES.
CHRONIC OVEREXPOSURE TO WELDING FUMES MAY AFFECT PULMONARY FUNCTION.
OVEREXPOSURE TO MANGANESE AND MANGANESE COMPOUNDS ABOVE SAFE EXPOSURE
LIMITS CAN CAUSE IRREVERSIBLE DAMAGE TO THE CENTRAL NERVOUS SYSTEM,
INCLUDING THE BRAIN, SYMPTOMS OF WHICH MAY INCLUDE SLURRED SPEECH,
LETHARGY, TREMOR, MUSCULAR WEAKNESS, PSYCHOLOGICAL DISTURBANCES AND
SPASTIC GAIT, DISTURBANCES AND SPASTIC GAIT.
HEAT: SPATTER AND MELTING METAL CAN CAUSE BUM INJURIES AND START FIRES.
RADIATION: ARC RAYS CAN SEVERELY DAMAGE EYES OR SKIN.
ELECTRICITY: ELECTRIC SHOCK CAN KILL.
OTHER:
OTHER:
EMERGENCY OVERVIEW:
COATED METAL RODS IN VARYING COLORS. THIS PRODUCT IS NORMALLY NOT
CONSIDERED HAZARDOUS WHEN TRANSPORTED. GLOVES SHOULD BE WORN WHEN HANDLING
TO PREVENT CONTAMINATING HANDS WITH PRODUCT DUST.
| SECTION 3: COMPOSITION/INFORMATION ON INGREDIENTS | |
3.2. MIXTURES:
CHEMICAL NAME CAS NO. CONCENTRATION
EC NO.
REACH NO.
INDEX NO.
IRON(REACH REGISTERED) 7439-89-6 60-100%
231-096-4
SILICATE BINDER (SODIUM 1344-09-8 1-5%
SILICATE) 215-687-4
TITANIUM OXIDE** 13463-67-7 1-5%
236-675-5
CELLULOSE 9004-34-6 1-5%
232-674-9
POTASSIUM TITANIUM OXIDE 12056-51-8 1-5%
432-240-0
MANGANESE 7439-96-5 1-5%
231-105-1
QUARTZ* 14808-60-7 0.1-1%
238-878-4
MAGNESITE 546-93-0 0.1-1%
208-915-9
SODIUM SILICATE 15859-24-2 0.1-1%
239-981-7
LIMESTONE 1317-65-3 0.1-1%
215-279-6
CHEMICAL NAME CLASSIFICATION H-PHRASE NOTE
M FACTOR ACUTE
M FACTOR CHRONIC
IRON(REACH REGISTERED)
SILICATE BINDER (SODIUM
SILICATE)
TITANIUM OXIDE**
CELLULOSE
POTASSIUM TITANIUM OXIDE H351
MANGANESE
QUARTZ* STOT RE 1 H372
MAGNESITE
SODIUM SILICATE
LIMESTONE
| SECTION 4: FIRST AID MEASURES | |
4.1. DESCRIPTION OF FIRST AID MEASURES:
INHALATION:
IF BREATHING HAS STOPPED, PERFORM ARTIFICIAL RESPIRATION AND OBTAIN MEDICAL
ASSISTANCE IMMEDIATELY! IF BREATHING IS DIFFICULT, PROVIDE FRESH AIR AND
CALL PHYSICIAN.
SKIN CONTACT:
FOR SKIN BURNS FROM ARC RADIATION, PROMPTLY FLUSH WITH COLD WATER. GET
MEDICAL ATTENTION FOR BUMS OR IRRITATIONS THAT PERSIST. TO REMOVE DUST OR
PARTICLES WASH WITH MILD SOAP AND WATER
EYE CONTACT:
FOR RADIATION BURNS DUE TO ARC FLASH, SEE PHYSICIAN. TO REMOVE DUSTS OR
FUMES FLUSH WITH WATER FOR AT LEAST FIFTEEN MINUTES. IF IRRITATION
PERSISTS, OBTAIN MEDICAL ASSISTANCE.
4.2. MOST IMPORTANT SYMPTOMS AND EFFECTS, BOTH ACUTE AND DELAYED:
NOT APPLICABLE
4.3. INDICATION OF ANY IMMEDIATE MEDICAL ATTENTION AND SPECIAL TREATMENT
NEEDED: NOT APPLICABLE
OTHER:
OTHER:
ELECTRIC SHOCK:
DISCONNECT AND TURN OFF THE POWER. USE A NONCONDUCTIVE MATERIAL TO PULL
VICTIM AWAY FROM CONTACT WITH LIVE PARTS OR WIRES. IF NOT BREATHING, BEGIN
ARTIFICIAL RESPIRATION, PREFERABLY MOUTH-TO-MOUTH. IF NO DETECTABLE PULSE,
BEGIN CPR CALL A PHYSICIAN IMMEDIATELY.
GENERAL: MOVE TO FRESH AIR AND CALL FOR MEDICAL AID.
| SECTION 5: FIREFIGHTING MEASURES | |
5.1. EXTINGUISHING MEDIA:
SUITABLE EXTINGUISHING MEDIA:
NO SPECIFIC RECOMMENDATIONS FOR WELDING CONSUMABLES. WELDING ARCS AND
SPARKS CAN IGNITE COMBUSTIBLE AND FLAMMABLE MATERIALS. USE THE
EXTINGUISHING MEDIA RECOMMENDED FOR THE BURNING MATERIALS AND FIRE
SITUATION.
5.2. SPECIAL HAZARDS ARISING FROM THE SUBSTANCE OR MIXTURE:
NOT APPLICABLE
5.3. ADVICE FOR FIREFIGHTERS:
SPECIAL PROTECTIVE EQUIPMENT FOR FIRE-FIGHTERS:
WEAR SELF-CONTAINED BREATHING APPARATUS AS FUMES OR VAPORS MAY BE HARMFUL.
| SECTION 6: ACCIDENTAL RELEASE MEASURES | |
6.1. PERSONAL PRECAUTIONS, PROTECTIVE EQUIPMENT AND EMERGENCY PROCEDURES:
PERSONAL PRECAUTIONS, PROTECTIVE EQUIPMENT AND EMERGENCY PROCEDURES:
WEAR HAND, HEAD, EYES, EAR AND BODY PROTECTION LIKE WELDERS GLOVES, HELMET
OR FACE SHIELD WITH FILTER LENS, SAFETY BOOTS, APRON, ARM AND SHOULDER
PROTECTION. KEEP PROTECTIVE CLOTHING CLEAN AND DRY.
6.2. ENVIRONMENTAL PRECAUTIONS:
ENVIRONMENTAL PRECAUTIONS: REFER TO SECTION 13.
6.3. METHODS AND MATERIAL FOR CONTAINMENT AND CLEANING UP:
METHODS AND MATERIAL FOR CONTAINMENT AND CLEANING UP:
SOLID OBJECTS MAY BE PICKED UP AND PLACED INTO A CONTAINER. LIQUIDS OR
PASTES SHOULD BE SCOOPED UP AND PLACED INTO A CONTAINER. WEAR PROPER
PROTECTIVE EQUIPMENT WHILE HANDLING THESE MATERIALS. DO NOT DISCARD AS
REFUSE.
6.4. REFERENCE TO OTHER SECTIONS:
REFERENCE TO OTHER SECTIONS: REFER TO SECTION 8/13
| SECTION 7: HANDLING AND STORAGE | |
7.1. PRECAUTIONS FOR SAFE HANDLING:
PREVENTIVE HANDLING PRECAUTIONS:
HANDLE WITH CARE TO AVOID STINGS AND CUTS. WEAR GLOVES WHEN HANDLING
WELDING CONSUMABLES. AVOID EXPOSURE TO DUST. DO NOT INGEST. SOME
INDIVIDUALS CAN DEVELOP AN ALLERGIC REACTION TO CERTAIN MATERIALS.
RETAIN ALL WARNING AND IDENTITY LABELS.
7.2. CONDITIONS FOR SAFE STORAGE, INCLUDING ANY INCOMPATIBILITIES:
CONDITIONS FOR SAFE STORAGE, INCLUDING ANY INCOMPATIBILITIES:
KEEP SEPARATE FROM CHEMICAL SUBSTANCES LIKE ACIDS AND STRONG BASES, WHICH
COULD CAUSE CHEMICAL REACTIONS. STORE IN COOL/WELL-VENTILATED PLACE.
7.3. SPECIFIC END USE(S): NOT APPLICABLE
| SECTION 8: EXPOSURE CONTROLS/PERSONAL PROTECTION | |
8.1. CONTROL PARAMETERS:
EXPOSURE LIMITS:
USE INDUSTRIAL HYGIENE MONITORING EQUIPMENT TO ENSURE THAT EXPOSURE DOES
NOT EXCEED APPLICABLE NATIONAL EXPOSURE LIMITS. THE FOLLOWING LIMITS CAN
BE USED AS GUIDANCE. UNLESS NOTED, ALL VALUES ARE FOR 8 HOUR TIME WEIGHTED
AVERAGES (TWA).
NATIONAL OCCUPATIONAL EXPOSURE LIMITS:
INGREDIENT CAS NO. EXPOSURE LIMIT
EC NO. PPM / MG/M3
LIMESTONE 1317-65-3
10
CELLULOSE 9004-34-6
232-674-9 10
MANGANESE 7439-96-5
231-105-1 0.2
LIMESTONE 1317-65-3
215-279-6 4
MAGNESIUM CARBONATE 546-93-0
208-915-9 10
CELLULOSE 9004-34-6
232-674-9 4
IRON(REACH REGISTERED) 7439-89-6
231-096-4
MAGNESIUM CARBONATE 546-93-0
208-915-9 4
TITANIUM OXIDE** 13463-67-7
236-675-5 10
POTASSIUM TITANIUM 12056-51-8
OXIDE 432-240-0
QUARTZ* 14808-60-7
238-878-4 0.1
SODIUM SILICATE 15859-24-2
239-981-7
SILICATE BINDER 1344-09-8
(SODIUM SILICATE) 215-687-4
INGREDIENT SHORT-TERM SOURCE REMARK YEAR
EXPOSURE LIMIT
PPM / MG/M3
LIMESTONE UK WEL TOTAL INHALABLE 2018
CELLULOSE UK WEL INHALABLE DUST 2018
MANGANESE UK WEL INHALABLE FRACTION 2018
LIMESTONE UK WEL RESPIRABLE 2018
MAGNESIUM UK WEL INHALABLE DUST 2018
CARBONATE
CELLULOSE UK WEL RESPIRABLE DUST 2018
IRON UK WEL 2018
(REACH
REGISTERED)
MAGNESIUM UK WEL RESPIRABLE DUST 2018
CARBONATE
TITANIUM UK WEL TOTAL INHALABLE 2018
OXIDE**
POTASSIUM UK WEL 2018
TITANIUM
OXIDE
QUARTZ* UK WEL 2018
SODIUM UK WEL 2018
SILICATE
SILICATE UK WEL 2018
BINDER
(SODIUM
SILICATE)
8.2. EXPOSURE CONTROLS:
TECHNICAL PRECAUTION MEASURES:
ENSURE SUFFICIENT VENTILATION, LOCAL EXHAUST, OR BOTH. KEEP WORKING PLACE
AND PROTECTIVE CLOTHING CLEAN AND DRY. CHECK CONDITION OF PROTECTIVE
CLOTHING AND EQUIPMENT ON A REGULAR BASIS. TRAIN WELDERS TO AVOID CONTACT
WITH LIVE ELECTRICAL PARTS AND INSULATE CONDUCTIVE PARTS.
SAFETY GLOVES:
ABRASION (CYCLES): (TYPE A-2 (500)); (TYPE B-1 (100))
CUT (FADOR): (TYPE A-1 (1.2)); (TYPE B-1 (1.2))
TEAR (NEWTON): (TYPE A-2 (25)); (TYPE B-1 (10))
PUNCTURE (NEWTON): (TYPE A-2 (60)); (TYPE B-1 (20))
BURNING BEHAVIOUR: (TYPE A-3); (TYPE B-2)
CONTACT HEAT: (TYPE A-1); (TYPE B-1)
CONVECTIVE HEAT: (TYPE A-2); (TYPE B-)
SMALL SPLASHES: (TYPE A-3); (TYPE B-2)
DEXTERITY:
(TYPE A-1 (11)); (TYPE B-4 (6.5)) TYPE B GLOVES ARE RECOMMENDED WHEN HIGH
DEXTERITY IS REQUIRED AS FOR TIG WELDING, WHILE TYPE A GLOVES ARE
RECOMMENDED FOR OTHER WELDING PROCESSES. THE CONTACT TEMP (OC) IS 100 AND
THE THRESHOLD TIME (SECONDS) >15.
OTHER:
OTHER:
AVOID EXPOSURE TO BRAZING AND WELDING FUMES, RADIATION, SPATTER, ELECTRIC
SHOCK, HEATED MATERIALS AND DUST.
PERSONAL PROTECTIVE EQUIPMENT:
USE RESPIRATOR OR AIR SUPPLIED RESPIRATOR WHEN BRAZING IN A CONFINED SPACE,
OR WHERE LOCAL EXHAUST OR VENTILATION IS NOT SUFFICIENT TO KEEP EXPOSURE
VALUES WITHIN SAFE LIMITS. USE SPECIAL CARE WHEN BRAZING PAINTED OR COATED
STEELS SINCE HAZARDOUS SUBSTANCES FROM THE COATING MAY BE EMITTED. WEAR
HAND, HEAD, EYES, EAR AND BODY PROTECTION LIKE WELDERS GLOVES, HELMET OR
FACE SHIELD WITH FILTER LENS, SAFETY BOOTS, APRON, ARM AND SHOULDER
PROTECTION. KEEP PROTECTIVE CLOTHING CLEAN AND DRY.
| SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES | |
9.1. INFORMATION ON BASIC PHYSICAL AND CHEMICAL PROPERTIES:
APPEARANCE, PHYSICAL STATE: SOLID, NON-VOLATILE WITH VARYING COLOR.
APPEARANCE, COLOUR: NOT APPLICABLE
ODOUR: NOT APPLICABLE
ODOUR THRESHOLD: NOT APPLICABLE
PH VALUE: NOT APPLICABLE
MELTING POINT / FREEZING POINT: >1300 DEG. C / >2300 DEG. F
INITIAL BOILING POINT AND BOILING RANGE: NOT APPLICABLE
FLASH POINT: NOT APPLICABLE
EVAPORATION RATE: NOT APPLICABLE
FLAMMABILITY (SOLID, GAS): NOT APPLICABLE
UPPER / LOWER FLAMMABILITY OR EXPLOSIVE LIMITS: NOT APPLICABLE
VAPOUR PRESSURE: NOT APPLICABLE
VAPOUR DENSITY: NOT APPLICABLE
RELATIVE DENSITY: NOT APPLICABLE
SOLUBILITY: NOT APPLICABLE
PARTITION COEFFICIENT N-OCTANOL / WATER: NOT APPLICABLE
IGNITION TEMPERATURE: NOT APPLICABLE
DECOMPOSITION TEMPERATURE: NOT APPLICABLE
VISCOSITY, KINEMATIC: NOT APPLICABLE
VISCOSITY, DYNAMIC: NOT APPLICABLE
EXPLOSIVE PROPERTIES: NOT APPLICABLE
OXIDISING PROPERTIES: NOT APPLICABLE
9.2. OTHER INFORMATION: NOT APPLICABLE
| SECTION 10: STABILITY AND REACTIVITY | |
10.1. REACTIVITY:
REACTIVITY:
NON REACTIVE UNLESS GETS IN CONTACT WITH CHEMICAL SUBSTANCES LIKE ACIDS OR
STRONG BASES COULD CAUSE GENERATION OF GAS
10.2. CHEMICAL STABILITY:
CHEMICAL STABILITY THIS PRODUCT IS STABLE UNDER NORMAL CONDITIONS.
10.3. POSSIBILITY OF HAZARDOUS REACTIONS: NOT APPLICABLE
10.4. CONDITIONS TO AVOID: NOT APPLICABLE
10.5. INCOMPATIBLE MATERIALS: NOT APPLICABLE
10.6. HAZARDOUS DECOMPOSITION PRODUCTS: NOT APPLICABLE
OTHER:
OTHER:
WHEN THIS PRODUCT IS USED IN A WELDING PROCESS, HAZARDOUS DECOMPOSITION
PRODUCTS WOULD INCLUDE THOSE FROM THE VOLATILIZATION, REACTION OR OXIDATION
OF THE MATERIALS LISTED IN SECTION 3 AND THOSE FROM THE BASE METAL / COATED
WIRE / COATED ROD / BARE WIRE / BARE ROD.
THE AMOUNT OF FUMES GENERATED FROM MANUAL METAL ARC WELDING VARIES WITH
WELDING PARAMETERS AND DIMENSIONS, BUT IS GENERALLY NO MORE THAN 5 TO
15 G/KG CONSUMABLE.
A SIGNIFICANT AMOUNT OF THE CHROMIUM IN THE FUMES CAN BE HEXAVALENT
CHROMIUM, WHICH HAS A VERY LOW EXPOSURE LIMIT IN SOME COUNTRIES.
REASONABLY EXPECTED GASEOUS PRODUCTS WOULD INCLUDE CARBON OXIDES, NITROGEN
OXIDES AND OZONE. AIR CONTAMINANTS AROUND THE WELDING AREA CAN BE AFFECTED
BY THE WELDING PROCESS AND INFLUENCE THE COMPOSITION AND QUANTITY OF FUMES
AND GASES PRODUCED.
| SECTION 11: TOXICOLOGICAL INFORMATION | |
11.1. INFORMATION ON TOXICOLOGICAL EFFECTS:
INFORMATION ON TOXICOLOGICAL EFFECTS:
INHALATION OF BRAZING AND WELDING FUMES AND GASES CAN BE DANGEROUS TO YOUR
HEALTH. CLASSIFICATION OF BRAZING AND WELDING FUMES IS DIFFICULT BECAUSE
OF VARYING BASE MATERIALS, COATINGS, AIR CONTAMINATION AND PROCESSES. THE
INTERNATIONAL AGENCY FOR RESEARCH ON CANCER HAS CLASSIFIED WELDING FUMES
AS CARCINOGENIC TO HUMANS (GROUP 1).
ACUTE TOXICITY:
OVEREXPOSURE TO SOLDERING FUMES MAY RESULT IN SYMPTOMS LIKE METAL FUME
FEVER, DIZZINESS, NAUSEA, DRYNESS OR IRRITATION OF THE NOSE, THROAT OR
EYES.
SKIN CORROSION/IRRITATION: NO DATA AVAILABLE
SERIOUS EYE DAMAGE/IRRITATION: NO DATA AVAILABLE
GERM CELL MUTAGENICITY: NO DATA AVAILABLE
CARCINOGENICITY:
PRODUCT / SUBSTANCE NAME OTHER
CAS / EC NO.
TITANIUM OXIDE** **THIS PRODUCT CONTAINS SUBSTANCE(S)
13463-67-7 / 236-675-5 THAT MAY CAUSE CANCER, WHICH IS/ARE
CLASSIFIED AS POSSIBLY CARCINOGENIC
TO HUMANS AS PER IARC.
QUARTZ* *THIS PRODUCT CONTAINS SUBSTANCE(S)
14808-60-7 / 238-878-4 THAT MAY CAUSE CANCER, WHICH IS/ARE
CLASSIFIED AS CARCINOGENIC TO HUMANS
AS PER IARC.
REPRODUCTIVE TOXICITY: NO DATA AVAILABLE
STOT-SINGLE EXPOSURE: NO DATA AVAILABLE
STOT-REPEATED EXPOSURE: NO DATA AVAILABLE
ASPIRATION HAZARD: NO DATA AVAILABLE
OTHER:
LONG TERM EFFECT:
OVEREXPOSURE TO WELDING FUMES MAY AFFECT PULMONARY FUNCTION. OVEREXPOSURE
TO MANGANESE AND MANGANESE COMPOUNDS ABOVE SAFE EXPOSURE LIMITS CAN CAUSE
IRREVERSIBLE DAMAGE TO THE CENTRAL NERVOUS SYSTEM, INCLUDING THE BRAIN,
SYMPTOMS OF WHICH MAY INCLUDE SLURRED SPEECH, LETHARGY, TREMOR, MUSCULAR
WEAKNESS, PSYCHOLOGICAL DISTURBANCES AND SPASTIC GAIT, PSYCHOLOGICAL
DISTURBANCES AND SPASTIC GAIT PROLONGED INHALATION OF TITANIUM DIOXIDE
ABOVE SAFE EXPOSURE LIMITS CAN CAUSE CANCER. INHALABLE QUARTZ IS A
RESPIRATORY CARCINOGEN HOWEVER THE PROCESS OF WELDING CONVERTS CRYSTALLINE
QUARTZ TO THE AMORPHOUS FORM WHICH IS NOT CONSIDERED TO BE A CARCINOGEN.
| SECTION 12: ECOLOGICAL INFORMATION | |
12.1. TOXICITY:
TOXICITY:
WELDING CONSUMABLES AND MATERIALS COULD DEGRADE/WEATHER INTO COMPONENTS
ORIGINATING FROM THE CONSUMABLES OR FROM THE MATERIALS USED IN THE WELDING
PROCESS. AVOID EXPOSURE TO CONDITIONS THAT COULD LEAD TO ACCUMULATION IN
SOILS OR GROUNDWATER.
12.2. PERSISTENCE AND DEGRADABILITY:
PERSISTENCE AND DEGRADABILITY: NO DATA AVAILABLE
12.3. BIOACCUMULATIVE POTENTIAL:
BIOACCUMULATIVE POTENTIAL: NO DATA AVAILABLE
12.4. MOBILITY IN SOIL:
MOBILITY: NO DATA AVAILABLE
12.5. RESULTS OF PBT AND VPVB ASSESSMENT:
RESULTS OF PBT AND VPVB ASSESSMENT: NO DATA AVAILABLE
12.6. OTHER ADVERSE EFFECTS:
OTHER ADVERSE EFFECTS: NO DATA AVAILABLE
| SECTION 13: DISPOSAL CONSIDERATIONS | |
13.1. WASTE TREATMENT METHODS:
DISPOSAL CONSIDERATIONS:
DISCARD ANY PRODUCT, RESIDUE, DISPOSABLE CONTAINER OR LINER IN AN
ENVIRONMENTALLY ACCEPTABLE MANNER, IN FULL COMPLIANCE WITH FEDERAL AND
LOCAL REGULATIONS. USE RECYCLING PROCEDURES IF AVAILABLE.
USA RCRA:
THIS PRODUCT IS NOT CONSIDERED HAZARDOUS WASTE IF DISCARDED. RESIDUES FROM
BRAZING AND WELDING CONSUMABLES AND PROCESSES COULD DEGRADE AND ACCUMULATE
IN SOILS AND GROUNDWATER. WELDING SLAG FROM THIS PRODUCT TYPICALLY CONTAINS
MAINLY THE FOLLOWING COMPONENTS ORIGINATING FROM THE COATING OF THE
ELECTRODE. Fe, O, Mn, Zr, F, Na, Si, K, Ca, Al, Mg ,Ti
| SECTION 14: TRANSPORT INFORMATION | |
14.1. UN NUMBER: NOT APPLICABLE
14.2. UN PROPER SHIPPING NAME: NOT APPLICABLE
14.3. TRANSPORT HAZARD CLASS(ES): NOT APPLICABLE
14.4. PACKING GROUP: NOT APPLICABLE
14.5. ENVIRONMENTAL HAZARDS: NOT APPLICABLE
14.6. SPECIAL PRECAUTIONS FOR USER: NOT APPLICABLE
14.7. TRANSPORT IN BULK ACCORDING TO ANNEX II OF MARPOL AND THE IBC CODE:
NOT APPLICABLE
| SECTION 15: REGULATORY INFORMATION | |
15.1 SAFETY, HEALTH AND ENVIRONMENTAL REGULATIONS/LEGISLATION SPECIFIC FOR
THE SUBSTANCE OR MIXTURE:
EU REGULATIONS:
REGULATION (EC) NO 1907/2006 OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL
OF 18 DECEMBER 2006 CONCERNING THE REGISTRATION, EVALUATION, AUTHORISATION
AND RESTRICTION OF CHEMICALS (REACH), ESTABLISHING A EUROPEAN CHEMICALS
AGENCY, AMENDING DIRECTIVE 1999/45/EC AND REPEALING COUNCIL REGULATION
(EEC) NO 793/93 AND COMMISSION REGULATION (EC) NO 1488/94 AS WELL AS
COUNCIL DIRECTIVE 76/769/EEC AND COMMISSION DIRECTIVES 91/155/EEC,
93/67/EEC, 93/105/EC AND 2000/21/EC. REGULATION (EC) NO 1272/2008 OF
THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 16 DECEMBER 2008 ON
CLASSIFICATION, LABELLING AND PACKAGING OF SUBSTANCES AND MIXTURES,
AMENDING AND REPEALING DIRECTIVES 67/548/EEC AND 1999/45/EC, AND AMENDING
REGULATION (EC) NO 1907/2006
COMMISSION REGULATION (EU) 2015/830 OF 28 MAY 2015 AMENDING REGULATION
(EC) NO 1907/2006 OF THE EUROPEAN PARLIAMENT AND THE COUNCIL CONCERNING
THE REGISTRATION, EVALUATION, AUTHORISATION AND RESTRICTION OF CHEMICALS
(REACH)
DIRECTIVE 2008/98/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL, OF
19 NOVEMBER 2008. ON WASTE AND REPEALING CERTAIN DIRECTIVES.
EUROPEAN PARLIAMENT AND COUNCIL DIRECTIVE 94/62/EC OF 20 DECEMBER 1994 ON
PACKAGING AND PACKAGING WASTE.
OTHER REGULATIONS, LIMITATIONS AND LEGAL REGULATIONS:
POLAND REGULATIONS:
ACT OF 25 FEBRUARY 2011 ON THE CHEMICAL SUBSTANCES AND THEIR MIXTURES
(OJ # 63, POZ. 322).
REGULATION OF THE MINISTER OF LABOUR AND SOCIAL POLICY OF 6 JUNE 2014 ON
MAXIMUM PERMISSIBLE CONCENTRATION AND INTENSITY OF AGENTS HARMFUL TO HEALTH
IN THE WORKING ENVIRONMENT (DZ. U. Z. 2014, POZ 817).
THE ACT ON WASTE OF 14 DECEMBER 2012, JOURNAL OF LAWS OF 2013, ITEM 21 WITH
AMENDMENTS ACT OF 13TH JUNE 2013 ON PACKAGING MANAGEMENT AND PACKAGING
WASTE (JOURNAL OF LAWS OF 2013, ITEM 888).
REGULATION OF THE MINISTER OF THE ENVIRONMENT OF 9 DECEMBER 2014 ON WASTE
CATALOGUE (JOURNAL OF LAWS OF 2014, ITEM 1923).
REGULATION OF THE MINISTER OF ECONOMY OF 21 DECEMBER 2005. CONCERNING
ESSENTIAL REQUIREMENTS FOR PERSONAL PROTECTIVE EQUIPMENT (JOURNAL. LAWS NO.
259, ITEM. 2173).
REGULATION OF THE MINISTER OF HEALTH OF 2 FEBRUARY 2011 ON TESTS AND
MEASUREMENTS OF FACTORS HARMFUL TO HEALTH IN THE WORKING ENVIRONMENT (THE
JOURNAL OF LAWS 2011, NO. 33, ITEM 166).
USA REGULATIONS:
USA:
THIS PRODUCT CONTAINS OR PRODUCES A CHEMICAL KNOWN TO THE STATE OF
CALIFORNIA TO CAUSE CANCER AND BIRTH DEFECTS (OR OTHER REPRODUCTIVE HARM).
(CALIFORNIA HEALTH & SAFETY CODE SUBSECTION 25249.5 ET SEQ.)
CERCLA/SARA TITLE III REPORTABLE QUANTITIES (RQS) AND/OR THRESHOLD PLANNING
QUANTITIES (TPQS):
PRODUCT IS A SOLID SOLUTION IN THE FORM OF A SOLID ARTICLE. SPILLS OR
RELEASES RESULTING IN THE LOSS OF ANY INGREDIENT AT OR ABOVE ITS RQ REQUIRE
IMMEDIATE NOTIFICATION TO THE NATIONAL RESPONSE CENTER AND TO YOUR LOCAL
EMERGENCY PLANNING COMMITTEE.
EPCRA/SARA TITLE III 313 TOXIC CHEMICALS:
THE FOLLOWING METALLIC COMPONENTS ARE LISTED AS SARA 313 "TOXIC CHEMICALS"
AND POTENTIAL SUBJECT TO ANNUAL SARA 313 REPORTING. SEE SECTION 3 FOR
WEIGHT PERCENT.
MANGANESE: 1.0% DE MINIMIS CONCENTRATION
INTERNATIONAL INVENTORIES:
AUSTRALIA:
THE SUBSTANCE(S) IN THIS PRODUCT IS/ARE IN COMPLIANCE WITH THE INVENTORY
REQUIREMENTS OF AUSTRALIA- INVENTORY OF INDUSTRIAL CHEMICALS (AIIC)
UNITED STATES EPA TOXIC SUBSTANCE CONTROL ACT:
ALL CONSTITUENTS OF THIS PRODUCT ARE ON THE TSCA INVENTORY LIST OR ARE
EXCLUDED FROM LISTING.
CANADIAN ENVIRONMENTAL PROTECTION ACT (CEPA):
ALL CONSTITUENT(S) OF THIS PRODUCT IS/ARE ON THE DOMESTIC SUBSTANCE LIST
(DSL).
15.2. CHEMICAL SAFETY ASSESSMENT:
CHEMICAL SAFETY ASSESSMENT: NOT AVAILABLE
OTHER:
OTHER:
READ AND UNDERSTAND THE MANUFACTURER'S INSTRUCTIONS, YOUR EMPLOYER'S SAFETY
PRACTICES AND THE HEALTH AND SAFETY INSTRUCTIONS ON THE LABEL. OBSERVE ANY
FEDERAL AND LOCAL REGULATIONS. TAKE PRECAUTIONS WHEN WELDING AND PROTECT
YOURSELF AND OTHERS.
WARNING:
WELDING FUMES AND GASES ARE HAZARDOUS TO YOUR HEALTH AND MAY DAMAGE LUNGS
AND OTHER ORGANS. USE ADEQUATE VENTILATION. ELECTRIC SHOCK CAN KILL.
ARC RAYS AND SPARKS CAN INJURE EYES AND BURN SKIN. WEAR HAND, EYES AND
BODY PROTECTION. KEEP PROTECTIVE CLOTHING CLEAN AND DRY.
| SECTION 16: OTHER INFORMATION | |
CHANGES TO PREVIOUS REVISION:
THIS SAFETY DATA SHEET HAS BEEN REVISED DUE TO MODIFICATIONS TO SECTIONS
1-16.
PREVIOUS REVISION OF SDS AS PER REGULATION - APRIL 2019; LATEST REVISION
OF SDS AS PER REGULATION - MAY 2020
REFERENCES TO KEY LITERATURE AND DATA SOURCES:
REFER TO ESAB 'WELDING & CUTTING - RISKS AND MEASURES", F52-529
"PRECAUTIONS AND SAFE PRACTICES FOR ARC WELDING, CUTTING & GOUGING" AND
F2035 "PRECAUTIONS AND SAFE PRACTICES FOR GAS WELDING, CUTTING AND
HEATING" AVAILABLE FROM ESAB WEBSITE, WWW.ESAB.COM
PHRASE MEANING:
STOT RE 1 - SPECIFIC TARGET ORGAN TOXICITY - REPEATED EXPOSURE, HAZARD
CATEGORY 1
H351: SUSPECTED OF CAUSING CANCER.
H372: CAUSES DAMAGE TO ORGANS THROUGH PROLONGED OR REPEATED EXPOSURE.
OTHER:
ADDITIONAL INFORMATION USA:
CONTACT ESAB ATWWW.ESABNA.COM OR 1-800 ESAB-123 IF YOU HAVE ANY QUESTIONS
ABOUT THIS SDS. AMERICAN NATIONAL STANDARD Z49.1 SAFETY IN WELDING AND
CUTTING, ANSI/AWS F1.5 METHODS FOR SAMPLING AND ANALYZING GASES FROM
WELDING AND ALLIED PROCESSES, ANSI/AWS F1.1 "METHOD FOR SAMPLING AIRBORNE
PARTICLES GENERATED BY WELDING AND ALLIED PROCESSES", AWSF3.2M/F3.2
"VENTILATION GUIDE FOR WELD FUME", 550 NORTH LE JEUNE ROAD, MIAMI FLORIDA
33135. SAFETY AND HEALTH FACT SHEETS AVAILABLE FROM AWS AT WWW.AWS.ORG.
OSHA PUBLICATION 2206 (29 C.F.R. 1910), U.S. GOVERNMENT PRINTING OFFICE,
SUPERINTENDENT OF DOCUMENTS, P.O. BOX 371954, PITTSBURGH, PA 15250-7954
AMERICAN CONFERENCE OF GOVERNMENTAL HYGIENISTS (ACGIH), THRESHOLD LIMIT
VALUES AND BIOLOGICAL EXPOSURE INDICES, 6500 GLENWAY AVE., CINCINNATI,
OHIO 45211, USA.
NFPA 51B "STANDARD FOR FIRE PREVENTION DURING WELDING, CUTTING AND OTHER
HOT WORK" PUBLISHED BY THE NATIONAL FIRE PROTECTION ASSOCIATION, 1
BATTERYMARCH PARK, QUINCY, MA 02169
UK:
WMA PUBLICATION 236 AND 237, "HAZARDS FROM WELDING FUME", "THE ARC WELDER
AT WORK, SOME GENERAL ASPECTS OF HEALTH AND SAFETY".
GERMANY:
ACCIDENT PREVENTION REGULATION BGV D1, "WELDING, CUTTING AND RELATED
PROCEDURES".
CANADA:
CSA STANDARD CAN/CSA-W117.2-01 "SAFETY IN WELDING, CUTTING, AND ALLIED
PROCESSES".
THIS PRODUCT HAS BEEN CLASSIFIED ACCORDING TO THE HAZARD CRITERIA OF THE
CPR AND THE SDS CONTAINS ALL THE INFORMATION REQUIRED BY THE CPR.
ESAB REQUESTS THE USERS OF THIS PRODUCT TO STUDY THIS SAFETY DATA SHEET
(SDS) AND BECOME AWARE OF PRODUCT HAZARDS AND SAFETY INFORMATION. TO
PROMOTE SAFE USE OF THIS PRODUCT A USER SHOULD:
NOTIFY ITS EMPLOYEES, AGENTS AND CONTRACTORS OF THE INFORMATION ON THIS
SDS AND ANY PRODUCT HAZARDS/SAFETY INFORMATION. FURNISH THIS SAME
INFORMATION TO EACH OF ITS CUSTOMERS FOR THE PRODUCTS -REQUEST SUCH
CUSTOMERS TO NOTIFY EMPLOYEES AND CUSTOMERS FOR THE SAME PRODUCT HAZARDS
AND SAFETY INFORMATION. THE INFORMATION HEREIN IS GIVEN IN GOOD FAITH AND
BASED ON TECHNICAL DATA THAT ESAB BELIEVES TO BE RELIABLE. SINCE THE
CONDITIONS OF USE IS OUTSIDE OUR CONTROL, WE ASSUME NO LIABILITY IN
CONNECTION WITH ANY USE OF THIS INFORMATION AND NO WARRANTY EXPRESSED OR
IMPLIED IS GIVEN. CONTACT ESAB FOR MORE INFORMATION.